core/hash/sha256 - Verilog implementation of the SHA-256 cryptographic hash function

Age	Commit message (Collapse)	Author
2019-01-08	Ported the timing fix from SHA-512 to SHA-256. The core can now run at 170 ↵HEAD master	Joachim Strömbergson
	MHz in the target FPGA.
2018-10-18	Compacted the code for K constants.	Joachim Strömbergson

2018-10-18	(1) Locked down API to ignore read or write requests that could leak info or ↵	Joachim Strömbergson
	cause incorrect behaviour during processing. (2) Cleaned up API registers and the API.
2018-10-16	Added width definition.	Joachim Strömbergson

2018-08-28	Connected the pipeline regs for t1 and t2 in the stat update logic. Verified ↵	Joachim Strömbergson
	functionality. Updated README after test implementation. The design now meets 100 MHz clock in Artix7 with speed grade -1.
2018-08-28	Added pipeline register and stall cycle in the FSM to accomodate the ↵	Joachim Strömbergson
	pipeline. Registers not yet used in the design. Cleaned up constants to silence lint.
2018-04-27	Removed FSM and cleaned up code in W mem. Cleaned up testbenches to silence ↵	Joachim Strömbergson
	warnings.
2018-04-27	Updated Makefile with flags for cc. Added support for linting.	Joachim Strömbergson

2016-05-31	Updated README with status info, note about the new SHA224 functionality and ↵	Joachim Strömbergson
	the changes to the API.
2016-05-31	Adding functionality to support both SHA224 and SHA256 digest modes. Note: ↵	Joachim Strömbergson
	This update changes the ADDR_CTRL API register since it adds a mode bit. The version major number has been bumped to reflect this API change. The top level testbench contains tests for SHA224 as well as old tests for SHA256. The core level tb still only tests SHA256.
2016-05-31	Fixed long constants and instead rely on zero extend in Verilog.	Joachim Strömbergson

2015-12-13	whack copyrights	Paul Selkirk

2015-07-17	Fixed state restore testcase in core testbench. Fixed the double block test ↵	Joachim Strömbergson
	case to really test the core. Added data valid task.
2015-07-17	Minor cleanup.	Joachim Strömbergson

2015-07-17	Removed the address defines not needed.	Joachim Strömbergson

2015-07-17	Since state is digest having separate addresses for writing state is ↵	Joachim Strömbergson
	superflous. Captain slow.
2015-07-17	Added top level test case for restore state and continue hashing. Test OK.	Joachim Strömbergson

2015-07-16	Adding a task to dump the H state.	Joachim Strömbergson

2015-07-16	Adding test case for state restore.	Joachim Strömbergson

2015-07-16	Added logic to write state into the state registers. Simplified the state ↵	Joachim Strömbergson
	write interface to a common data port.
2015-07-16	The digest is the complete state so we only need to be able to write back ↵	Joachim Strömbergson
	state. The state addresses are still readable though.
2015-07-16	(1) Adding addresses to be able to read and write the internal hash state ↵	Joachim Strömbergson
	from the API. (2) Bumped version to reflect the changes to the API. (3) Added ports for state access in the core module and connected them in the top level wrapper.
2015-03-31	Remove wishbone testbench code, because we no longer have the verilog.	Paul Selkirk

2015-03-31	Revert streamlined wrapper, and don't delay register reads.	Paul Selkirk

2015-03-17	Rearrange cores.	Paul Selkirk

2015-03-11	Removed the wishbone wrapper we don't use.	Joachim Strömbergson

2014-11-07	Changed to asynch reset.	Joachim Strömbergson

2014-11-06	Fixed nits found using verilator linter. Removed trailing whitespace.	Joachim Strömbergson

2014-05-16	Adding helper functions for printing digest. Adding testcase for message ↵	Joachim Strömbergson
	with 1000 blocks.
2014-04-01	Updating sha256 python model with NIST dual block test case and test case ↵	Joachim Strömbergson
	with huge message. Disabling verbose mode.
2014-03-17	Removed redundant flag reset wires.	Joachim Strömbergson

2014-03-16	Adding self resetting init and next flags. Updating TBs to not reset the ↵	Joachim Strömbergson
	flags. Fixing clock parameter naming.
2014-03-15	(1) Updated interface to new std. (2) Added missing input designation in ↵	Joachim Strömbergson
	tasks. Now simumaltion with ModelSim works.
2014-02-26	Removed the positions of W no longer needed.	Joachim Strömbergson

2014-02-26	Changed the python model to use a sliding window for W.	Joachim Strömbergson

2014-02-25	Adding more info about the core.	Joachim Strömbergson

2014-02-25	Updating README with info on the design.	Joachim Strömbergson

2014-02-23	Fixed compile problems due to copy crime.	Joachim Strömbergson

2014-02-23	Update or README with more info on status.	Joachim Strömbergson

2014-02-23	Moved wmem update logic to a separate process.	Joachim Strömbergson

2014-02-22	Updated status with info on the sliding window W-mem and the new ↵	Joachim Strömbergson
	implementation results.
2014-02-22	Updated testbenches to the new sliding window W-mem.	Joachim Strömbergson

2014-02-22	Changed W-memory into sliding window. This also affected interface and ↵	Joachim Strömbergson
	integration in the core.
2014-02-19	Adding a simple README file in markdown format that describes the core.	Joachim Strömbergson

2014-02-19	Adding a Python model for the SHA256 core.	Joachim Strömbergson

2014-02-19	Adding a testbench for the Wishbone wrapper.	Joachim Strömbergson

2014-02-19	Adding a testbench for the SHA256 top level wrapper.	Joachim Strömbergson

2014-02-19	Adding a testbench for the SHA256 core.	Joachim Strömbergson

2014-02-19	Adding a testbench for the w memory module.	Joachim Strömbergson

2014-02-19	Adding a Wishbone wrapper for the SHA256 core.	Joachim Strömbergson