diff options
author | Joachim StroĢmbergson <joachim@secworks.se> | 2015-03-11 10:30:50 +0100 |
---|---|---|
committer | Joachim StroĢmbergson <joachim@secworks.se> | 2015-03-11 10:30:50 +0100 |
commit | 4b24edfbf02277a70c5e46ace62941fba4130216 (patch) | |
tree | 96c1e7f6081bac263bcdf8764f5fd130f94fc644 | |
parent | bbfa764f84bd2f76a011b53eaa4cd5f2178577c4 (diff) |
Removed the wishbone wrapper we don't use.
-rw-r--r-- | src/rtl/wb_sha256.v | 674 |
1 files changed, 0 insertions, 674 deletions
diff --git a/src/rtl/wb_sha256.v b/src/rtl/wb_sha256.v deleted file mode 100644 index 024d0b9..0000000 --- a/src/rtl/wb_sha256.v +++ /dev/null @@ -1,674 +0,0 @@ -//====================================================================== -// -// wb_sha256.v -// ----------- -// Wisbone compliant top level wrapper for the SHA-256 hash core. -// -// -// Author: Joachim Strombergson -// Copyright (c) 2014 SUNET -// -// Redistribution and use in source and binary forms, with or -// without modification, are permitted provided that the following -// conditions are met: -// -// 1. Redistributions of source code must retain the above copyright -// notice, this list of conditions and the following disclaimer. -// -// 2. Redistributions in binary form must reproduce the above copyright -// notice, this list of conditions and the following disclaimer in -// the documentation and/or other materials provided with the -// distribution. -// -// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -// FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -// COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -// BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -// LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, -// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) -// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF -// ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -// -//====================================================================== - -module wb_sha256( - // Clock and reset. - input wire CLK_I, - input wire RST_I, - - // Control and status. - input wire STB_I, - input wire WE_I, - output wire ACK_O, - output wire ERR_O, - - // Address and data. - input wire [7 : 0] ADR_I, - input wire [31 : 0] DAT_I, - output wire [31 : 0] DAT_O - ); - - - //---------------------------------------------------------------- - // Internal constant and parameter definitions. - //---------------------------------------------------------------- - parameter ADDR_NAME0 = 8'h00; - parameter ADDR_NAME1 = 8'h01; - parameter ADDR_VERSION = 8'h02; - - parameter ADDR_CTRL = 8'h08; - parameter CTRL_INIT_BIT = 0; - parameter CTRL_INIT_VALUE = 8'h01; - parameter CTRL_NEXT_BIT = 1; - parameter CTRL_NEXT_VALUE = 8'h02; - - parameter ADDR_STATUS = 8'h09; - parameter STATUS_READY_BIT = 0; - parameter STATUS_VALID_BIT = 1; - - parameter ADDR_BLOCK0 = 8'h10; - parameter ADDR_BLOCK1 = 8'h11; - parameter ADDR_BLOCK2 = 8'h12; - parameter ADDR_BLOCK3 = 8'h13; - parameter ADDR_BLOCK4 = 8'h14; - parameter ADDR_BLOCK5 = 8'h15; - parameter ADDR_BLOCK6 = 8'h16; - parameter ADDR_BLOCK7 = 8'h17; - parameter ADDR_BLOCK8 = 8'h18; - parameter ADDR_BLOCK9 = 8'h19; - parameter ADDR_BLOCK10 = 8'h1a; - parameter ADDR_BLOCK11 = 8'h1b; - parameter ADDR_BLOCK12 = 8'h1c; - parameter ADDR_BLOCK13 = 8'h1d; - parameter ADDR_BLOCK14 = 8'h1e; - parameter ADDR_BLOCK15 = 8'h1f; - - parameter ADDR_DIGEST0 = 8'h20; - parameter ADDR_DIGEST1 = 8'h21; - parameter ADDR_DIGEST2 = 8'h22; - parameter ADDR_DIGEST3 = 8'h23; - parameter ADDR_DIGEST4 = 8'h24; - parameter ADDR_DIGEST5 = 8'h25; - parameter ADDR_DIGEST6 = 8'h26; - parameter ADDR_DIGEST7 = 8'h27; - - parameter CORE_NAME0 = 32'h73686132; // "sha2" - parameter CORE_NAME1 = 32'h2d323536; // "-256" - parameter CORE_VERSION = 32'h302e3830; // "0.80" - - - //---------------------------------------------------------------- - // Registers including update variables and write enable. - //---------------------------------------------------------------- - reg init_reg; - reg next_reg; - reg ctrl_we; - - reg ready_reg; - - reg [31 : 0] block0_reg; - reg block0_we; - reg [31 : 0] block1_reg; - reg block1_we; - reg [31 : 0] block2_reg; - reg block2_we; - reg [31 : 0] block3_reg; - reg block3_we; - reg [31 : 0] block4_reg; - reg block4_we; - reg [31 : 0] block5_reg; - reg block5_we; - reg [31 : 0] block6_reg; - reg block6_we; - reg [31 : 0] block7_reg; - reg block7_we; - reg [31 : 0] block8_reg; - reg block8_we; - reg [31 : 0] block9_reg; - reg block9_we; - reg [31 : 0] block10_reg; - reg block10_we; - reg [31 : 0] block11_reg; - reg block11_we; - reg [31 : 0] block12_reg; - reg block12_we; - reg [31 : 0] block13_reg; - reg block13_we; - reg [31 : 0] block14_reg; - reg block14_we; - reg [31 : 0] block15_reg; - reg block15_we; - - reg [255 : 0] digest_reg; - - reg digest_valid_reg; - - - //---------------------------------------------------------------- - // Wires. - //---------------------------------------------------------------- - wire core_init; - wire core_next; - wire core_ready; - wire [511 : 0] core_block; - wire [255 : 0] core_digest; - wire core_digest_valid; - - reg [31 : 0] tmp_data_out; - reg tmp_ACK_O; - reg tmp_ERR_O; - - wire reset_n; - - - //---------------------------------------------------------------- - // Concurrent connectivity for ports etc. - //---------------------------------------------------------------- - assign core_init = init_reg; - - assign core_next = next_reg; - - assign core_block = {block0_reg, block1_reg, block2_reg, block3_reg, - block4_reg, block5_reg, block6_reg, block7_reg, - block8_reg, block9_reg, block10_reg, block11_reg, - block12_reg, block13_reg, block14_reg, block15_reg}; - - assign DAT_O = tmp_data_out; - - assign ACK_O = tmp_ACK_O; - assign ERR_O = tmp_ERR_O; - - assign reset_n = ~RST_I; - - - //---------------------------------------------------------------- - // core instantiation. - //---------------------------------------------------------------- - sha256_core core( - .clk(CLK_I), - .reset_n(reset_n), - - .init(core_init), - .next(core_next), - - .block(core_block), - - .ready(core_ready), - - .digest(core_digest), - .digest_valid(core_digest_valid) - ); - - - //---------------------------------------------------------------- - // reg_update - // - // Update functionality for all registers in the core. - // All registers are positive edge triggered with synchronous - // active low reset. All registers have write enable. - //---------------------------------------------------------------- - always @ (posedge CLK_I) - begin - if (!reset_n) - begin - init_reg <= 0; - next_reg <= 0; - ready_reg <= 0; - digest_reg <= 256'h0000000000000000000000000000000000000000000000000000000000000000; - digest_valid_reg <= 0; - block0_reg <= 32'h00000000; - block1_reg <= 32'h00000000; - block2_reg <= 32'h00000000; - block3_reg <= 32'h00000000; - block4_reg <= 32'h00000000; - block5_reg <= 32'h00000000; - block6_reg <= 32'h00000000; - block7_reg <= 32'h00000000; - block8_reg <= 32'h00000000; - block9_reg <= 32'h00000000; - block10_reg <= 32'h00000000; - block11_reg <= 32'h00000000; - block12_reg <= 32'h00000000; - block13_reg <= 32'h00000000; - block14_reg <= 32'h00000000; - block15_reg <= 32'h00000000; - end - else - begin - ready_reg <= core_ready; - digest_valid_reg <= core_digest_valid; - - if (ctrl_we) - begin - init_reg <= DAT_I[CTRL_INIT_BIT]; - next_reg <= DAT_I[CTRL_NEXT_BIT]; - end - - if (core_digest_valid) - begin - digest_reg <= core_digest; - end - - if (block0_we) - begin - block0_reg <= DAT_I; - end - - if (block1_we) - begin - block1_reg <= DAT_I; - end - - if (block2_we) - begin - block2_reg <= DAT_I; - end - - if (block3_we) - begin - block3_reg <= DAT_I; - end - - if (block4_we) - begin - block4_reg <= DAT_I; - end - - if (block5_we) - begin - block5_reg <= DAT_I; - end - - if (block6_we) - begin - block6_reg <= DAT_I; - end - - if (block7_we) - begin - block7_reg <= DAT_I; - end - - if (block8_we) - begin - block8_reg <= DAT_I; - end - - if (block9_we) - begin - block9_reg <= DAT_I; - end - - if (block10_we) - begin - block10_reg <= DAT_I; - end - - if (block11_we) - begin - block11_reg <= DAT_I; - end - - if (block12_we) - begin - block12_reg <= DAT_I; - end - - if (block13_we) - begin - block13_reg <= DAT_I; - end - - if (block14_we) - begin - block14_reg <= DAT_I; - end - - if (block15_we) - begin - block15_reg <= DAT_I; - end - - end - end // reg_update - - - //---------------------------------------------------------------- - // addr_decoder - // - // IF SEL_I is enabled will either try to write to or read - // from the internal registers. - //---------------------------------------------------------------- - always @* - begin : addr_decoder - ctrl_we = 0; - block0_we = 0; - block1_we = 0; - block2_we = 0; - block3_we = 0; - block4_we = 0; - block5_we = 0; - block6_we = 0; - block7_we = 0; - block8_we = 0; - block9_we = 0; - block10_we = 0; - block11_we = 0; - block12_we = 0; - block13_we = 0; - block14_we = 0; - block15_we = 0; - tmp_data_out = 32'h00000000; - tmp_ERR_O = 0; - tmp_ACK_O = 0; - - if (STB_I) - begin - if (WE_I) - begin - case (ADR_I) - // Write operations. - ADDR_CTRL: - begin - ctrl_we = 1; - tmp_ACK_O = 1; - end - - ADDR_BLOCK0: - begin - block0_we = 1; - tmp_ACK_O = 1; - end - - ADDR_BLOCK1: - begin - block1_we = 1; - tmp_ACK_O = 1; - end - - ADDR_BLOCK2: - begin - block2_we = 1; - tmp_ACK_O = 1; - end - - ADDR_BLOCK3: - begin - block3_we = 1; - tmp_ACK_O = 1; - end - - ADDR_BLOCK4: - begin - block4_we = 1; - tmp_ACK_O = 1; - end - - ADDR_BLOCK5: - begin - block5_we = 1; - tmp_ACK_O = 1; - end - - ADDR_BLOCK6: - begin - block6_we = 1; - tmp_ACK_O = 1; - end - - ADDR_BLOCK7: - begin - block7_we = 1; - tmp_ACK_O = 1; - end - - ADDR_BLOCK8: - begin - block8_we = 1; - tmp_ACK_O = 1; - end - - ADDR_BLOCK9: - begin - block9_we = 1; - tmp_ACK_O = 1; - end - - ADDR_BLOCK10: - begin - block10_we = 1; - tmp_ACK_O = 1; - end - - ADDR_BLOCK11: - begin - block11_we = 1; - tmp_ACK_O = 1; - end - - ADDR_BLOCK12: - begin - block12_we = 1; - tmp_ACK_O = 1; - end - - ADDR_BLOCK13: - begin - block13_we = 1; - tmp_ACK_O = 1; - end - - ADDR_BLOCK14: - begin - block14_we = 1; - tmp_ACK_O = 1; - end - - ADDR_BLOCK15: - begin - block15_we = 1; - tmp_ACK_O = 1; - end - - default: - begin - tmp_ERR_O = 1; - end - endcase // case (ADR_I) - end // if (WE_I) - - else - begin - case (ADR_I) - // Read operations. - ADDR_NAME0: - begin - tmp_data_out = CORE_NAME0; - tmp_ACK_O = 1; - end - - ADDR_NAME1: - begin - tmp_data_out = CORE_NAME1; - tmp_ACK_O = 1; - end - - ADDR_VERSION: - begin - tmp_data_out = CORE_VERSION; - tmp_ACK_O = 1; - end - - ADDR_CTRL: - begin - tmp_data_out = {28'h0000000, 2'b00, next_reg, init_reg}; - tmp_ACK_O = 1; - end - - ADDR_STATUS: - begin - tmp_data_out = {28'h0000000, 2'b00, digest_valid_reg, ready_reg}; - tmp_ACK_O = 1; - end - - ADDR_BLOCK0: - begin - tmp_data_out = block0_reg; - tmp_ACK_O = 1; - end - - ADDR_BLOCK1: - begin - tmp_data_out = block1_reg; - tmp_ACK_O = 1; - end - - ADDR_BLOCK2: - begin - tmp_data_out = block2_reg; - tmp_ACK_O = 1; - end - - ADDR_BLOCK3: - begin - tmp_data_out = block3_reg; - tmp_ACK_O = 1; - end - - ADDR_BLOCK4: - begin - tmp_data_out = block4_reg; - tmp_ACK_O = 1; - end - - ADDR_BLOCK5: - begin - tmp_data_out = block5_reg; - tmp_ACK_O = 1; - end - - ADDR_BLOCK6: - begin - tmp_data_out = block6_reg; - tmp_ACK_O = 1; - end - - ADDR_BLOCK7: - begin - tmp_data_out = block7_reg; - tmp_ACK_O = 1; - end - - ADDR_BLOCK8: - begin - tmp_data_out = block8_reg; - tmp_ACK_O = 1; - end - - ADDR_BLOCK9: - begin - tmp_data_out = block9_reg; - tmp_ACK_O = 1; - end - - ADDR_BLOCK10: - begin - tmp_data_out = block10_reg; - tmp_ACK_O = 1; - end - - ADDR_BLOCK11: - begin - tmp_data_out = block11_reg; - tmp_ACK_O = 1; - end - - ADDR_BLOCK12: - begin - tmp_data_out = block12_reg; - tmp_ACK_O = 1; - end - - ADDR_BLOCK13: - begin - tmp_data_out = block13_reg; - tmp_ACK_O = 1; - end - - ADDR_BLOCK14: - begin - tmp_data_out = block14_reg; - tmp_ACK_O = 1; - end - - ADDR_BLOCK15: - begin - tmp_data_out = block15_reg; - tmp_ACK_O = 1; - end - - ADDR_DIGEST0: - begin - tmp_data_out = digest_reg[255 : 224]; - tmp_ACK_O = 1; - end - - ADDR_DIGEST1: - begin - tmp_data_out = digest_reg[223 : 192]; - tmp_ACK_O = 1; - end - - ADDR_DIGEST2: - begin - tmp_data_out = digest_reg[191 : 160]; - tmp_ACK_O = 1; - end - - ADDR_DIGEST3: - begin - tmp_data_out = digest_reg[159 : 128]; - tmp_ACK_O = 1; - end - - ADDR_DIGEST4: - begin - tmp_data_out = digest_reg[127 : 96]; - tmp_ACK_O = 1; - end - - ADDR_DIGEST5: - begin - tmp_data_out = digest_reg[95 : 64]; - tmp_ACK_O = 1; - end - - ADDR_DIGEST6: - begin - tmp_data_out = digest_reg[63 : 32]; - tmp_ACK_O = 1; - end - - ADDR_DIGEST7: - begin - tmp_data_out = digest_reg[31 : 0]; - tmp_ACK_O = 1; - end - - default: - begin - tmp_ERR_O = 1; - end - endcase // case (ADR_I) - end - end - end // addr_decoder -endmodule // wb_sha256 - -//====================================================================== -// EOF wb_sha256.v -//====================================================================== |