diff options
Diffstat (limited to 'rtl/src/ipcore/clkmgr_dcm/simulation/timing')
12 files changed, 620 insertions, 0 deletions
diff --git a/rtl/src/ipcore/clkmgr_dcm/simulation/timing/clkmgr_dcm_tb.v b/rtl/src/ipcore/clkmgr_dcm/simulation/timing/clkmgr_dcm_tb.v new file mode 100644 index 0000000..9618253 --- /dev/null +++ b/rtl/src/ipcore/clkmgr_dcm/simulation/timing/clkmgr_dcm_tb.v @@ -0,0 +1,149 @@ +// file: clkmgr_dcm_tb.v
+//
+// (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
+//
+// This file contains confidential and proprietary information
+// of Xilinx, Inc. and is protected under U.S. and
+// international copyright and other intellectual property
+// laws.
+//
+// DISCLAIMER
+// This disclaimer is not a license and does not grant any
+// rights to the materials distributed herewith. Except as
+// otherwise provided in a valid license issued to you by
+// Xilinx, and to the maximum extent permitted by applicable
+// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+// (2) Xilinx shall not be liable (whether in contract or tort,
+// including negligence, or under any other theory of
+// liability) for any loss or damage of any kind or nature
+// related to, arising under or in connection with these
+// materials, including for any direct, or any indirect,
+// special, incidental, or consequential loss or damage
+// (including loss of data, profits, goodwill, or any type of
+// loss or damage suffered as a result of any action brought
+// by a third party) even if such damage or loss was
+// reasonably foreseeable or Xilinx had been advised of the
+// possibility of the same.
+//
+// CRITICAL APPLICATIONS
+// Xilinx products are not designed or intended to be fail-
+// safe, or for use in any application requiring fail-safe
+// performance, such as life-support or safety devices or
+// systems, Class III medical devices, nuclear facilities,
+// applications related to the deployment of airbags, or any
+// other applications that could lead to death, personal
+// injury, or severe property or environmental damage
+// (individually and collectively, "Critical
+// Applications"). Customer assumes the sole risk and
+// liability of any use of Xilinx products in Critical
+// Applications, subject only to applicable laws and
+// regulations governing limitations on product liability.
+//
+// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+// PART OF THIS FILE AT ALL TIMES.
+//
+
+//----------------------------------------------------------------------------
+// Clocking wizard demonstration testbench
+//----------------------------------------------------------------------------
+// This demonstration testbench instantiates the example design for the
+// clocking wizard. Input clocks are toggled, which cause the clocking
+// network to lock and the counters to increment.
+//----------------------------------------------------------------------------
+
+`timescale 1ps/1ps
+
+`define wait_lock @(posedge CLK_VALID)
+
+module clkmgr_dcm_tb ();
+
+ // Clock to Q delay of 100ps
+ localparam TCQ = 100;
+
+
+ // timescale is 1ps/1ps
+ localparam ONE_NS = 1000;
+ localparam PHASE_ERR_MARGIN = 100; // 100ps
+ // how many cycles to run
+ localparam COUNT_PHASE = 1024;
+ // we'll be using the period in many locations
+ localparam time PER1 = 20.0*ONE_NS;
+ localparam time PER1_1 = PER1/2;
+ localparam time PER1_2 = PER1 - PER1/2;
+
+ // Declare the input clock signals
+ reg CLK_IN1 = 1;
+
+ // The high bit of the sampling counter
+ wire COUNT;
+ // Status and control signals
+ reg RESET = 0;
+ wire INPUT_CLK_STOPPED;
+ wire CLK_VALID;
+ reg COUNTER_RESET = 0;
+wire [1:1] CLK_OUT;
+//Freq Check using the M & D values setting and actual Frequency generated
+
+ reg [13:0] timeout_counter = 14'b00000000000000;
+
+ // Input clock generation
+ //------------------------------------
+ always begin
+ CLK_IN1 = #PER1_1 ~CLK_IN1;
+ CLK_IN1 = #PER1_2 ~CLK_IN1;
+ end
+
+ // Test sequence
+ reg [15*8-1:0] test_phase = "";
+ initial begin
+ // Set up any display statements using time to be readable
+ $timeformat(-12, 2, "ps", 10);
+ $display ("Timing checks are not valid");
+ COUNTER_RESET = 0;
+ test_phase = "reset";
+ RESET = 1;
+ #(PER1*6);
+ RESET = 0;
+ test_phase = "wait lock";
+ `wait_lock;
+ #(PER1*6);
+ COUNTER_RESET = 1;
+ #(PER1*19.5)
+ COUNTER_RESET = 0;
+ #(PER1*1)
+ $display ("Timing checks are valid");
+ test_phase = "counting";
+ #(PER1*COUNT_PHASE);
+
+ $display("SIMULATION PASSED");
+ $display("SYSTEM_CLOCK_COUNTER : %0d\n",$time/PER1);
+ $finish;
+ end
+
+
+
+ // Instantiation of the example design containing the clock
+ // network and sampling counters
+ //---------------------------------------------------------
+ clkmgr_dcm_exdes
+ dut
+ (// Clock in ports
+ .CLK_IN1 (CLK_IN1),
+ // Reset for logic in example design
+ .COUNTER_RESET (COUNTER_RESET),
+ .CLK_OUT (CLK_OUT),
+ // High bits of the counters
+ .COUNT (COUNT),
+ // Status and control signals
+ .RESET (RESET),
+ .INPUT_CLK_STOPPED (INPUT_CLK_STOPPED),
+ .CLK_VALID (CLK_VALID));
+
+
+// Freq Check
+
+endmodule
diff --git a/rtl/src/ipcore/clkmgr_dcm/simulation/timing/sdf_cmd_file b/rtl/src/ipcore/clkmgr_dcm/simulation/timing/sdf_cmd_file new file mode 100644 index 0000000..d59e315 --- /dev/null +++ b/rtl/src/ipcore/clkmgr_dcm/simulation/timing/sdf_cmd_file @@ -0,0 +1,2 @@ +COMPILED_SDF_FILE = "../../implement/results/routed.sdf.X",
+SCOPE = clkmgr_dcm_tb.dut;
diff --git a/rtl/src/ipcore/clkmgr_dcm/simulation/timing/simcmds.tcl b/rtl/src/ipcore/clkmgr_dcm/simulation/timing/simcmds.tcl new file mode 100644 index 0000000..14523af --- /dev/null +++ b/rtl/src/ipcore/clkmgr_dcm/simulation/timing/simcmds.tcl @@ -0,0 +1,9 @@ +# file: simcmds.tcl
+
+# create the simulation script
+vcd dumpfile isim.vcd
+vcd dumpvars -m /clkmgr_dcm_tb -l 0
+wave add /
+run 50000ns
+quit
+
diff --git a/rtl/src/ipcore/clkmgr_dcm/simulation/timing/simulate_isim.sh b/rtl/src/ipcore/clkmgr_dcm/simulation/timing/simulate_isim.sh new file mode 100644 index 0000000..0152cb0 --- /dev/null +++ b/rtl/src/ipcore/clkmgr_dcm/simulation/timing/simulate_isim.sh @@ -0,0 +1,62 @@ +# file: simulate_isim.sh
+#
+# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
+#
+# This file contains confidential and proprietary information
+# of Xilinx, Inc. and is protected under U.S. and
+# international copyright and other intellectual property
+# laws.
+#
+# DISCLAIMER
+# This disclaimer is not a license and does not grant any
+# rights to the materials distributed herewith. Except as
+# otherwise provided in a valid license issued to you by
+# Xilinx, and to the maximum extent permitted by applicable
+# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+# (2) Xilinx shall not be liable (whether in contract or tort,
+# including negligence, or under any other theory of
+# liability) for any loss or damage of any kind or nature
+# related to, arising under or in connection with these
+# materials, including for any direct, or any indirect,
+# special, incidental, or consequential loss or damage
+# (including loss of data, profits, goodwill, or any type of
+# loss or damage suffered as a result of any action brought
+# by a third party) even if such damage or loss was
+# reasonably foreseeable or Xilinx had been advised of the
+# possibility of the same.
+#
+# CRITICAL APPLICATIONS
+# Xilinx products are not designed or intended to be fail-
+# safe, or for use in any application requiring fail-safe
+# performance, such as life-support or safety devices or
+# systems, Class III medical devices, nuclear facilities,
+# applications related to the deployment of airbags, or any
+# other applications that could lead to death, personal
+# injury, or severe property or environmental damage
+# (individually and collectively, "Critical
+# Applications"). Customer assumes the sole risk and
+# liability of any use of Xilinx products in Critical
+# Applications, subject only to applicable laws and
+# regulations governing limitations on product liability.
+#
+# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+# PART OF THIS FILE AT ALL TIMES.
+#
+
+# create the project
+vlogcomp -work work ${XILINX}/verilog/src/glbl.v
+vlogcomp -work work ../../implement/results/routed.v
+vlogcomp -work work clkmgr_dcm_tb.v
+
+# compile the project
+fuse work.clkmgr_dcm_tb work.glbl -L secureip -L simprims_ver -o clkmgr_dcm_isim.exe
+
+# run the simulation script
+./clkmgr_dcm_isim.exe -tclbatch simcmds.tcl -sdfmax /clkmgr_dcm_tb/dut=../../implement/results/routed.sdf
+
+# run the simulation script
+#./clkmgr_dcm_isim.exe -gui -tclbatch simcmds.tcl
diff --git a/rtl/src/ipcore/clkmgr_dcm/simulation/timing/simulate_mti.bat b/rtl/src/ipcore/clkmgr_dcm/simulation/timing/simulate_mti.bat new file mode 100644 index 0000000..8a08dc0 --- /dev/null +++ b/rtl/src/ipcore/clkmgr_dcm/simulation/timing/simulate_mti.bat @@ -0,0 +1,59 @@ +REM file: simulate_mti.bat
+REM
+REM (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
+REM
+REM This file contains confidential and proprietary information
+REM of Xilinx, Inc. and is protected under U.S. and
+REM international copyright and other intellectual property
+REM laws.
+REM
+REM DISCLAIMER
+REM This disclaimer is not a license and does not grant any
+REM rights to the materials distributed herewith. Except as
+REM otherwise provided in a valid license issued to you by
+REM Xilinx, and to the maximum extent permitted by applicable
+REM law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+REM WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+REM AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+REM BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+REM INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+REM (2) Xilinx shall not be liable (whether in contract or tort,
+REM including negligence, or under any other theory of
+REM liability) for any loss or damage of any kind or nature
+REM related to, arising under or in connection with these
+REM materials, including for any direct, or any indirect,
+REM special, incidental, or consequential loss or damage
+REM (including loss of data, profits, goodwill, or any type of
+REM loss or damage suffered as a result of any action brought
+REM by a third party) even if such damage or loss was
+REM reasonably foreseeable or Xilinx had been advised of the
+REM possibility of the same.
+REM
+REM CRITICAL APPLICATIONS
+REM Xilinx products are not designed or intended to be fail-
+REM safe, or for use in any application requiring fail-safe
+REM performance, such as life-support or safety devices or
+REM systems, Class III medical devices, nuclear facilities,
+REM applications related to the deployment of airbags, or any
+REM other applications that could lead to death, personal
+REM injury, or severe property or environmental damage
+REM (individually and collectively, "Critical
+REM Applications"). Customer assumes the sole risk and
+REM liability of any use of Xilinx products in Critical
+REM Applications, subject only to applicable laws and
+REM regulations governing limitations on product liability.
+REM
+REM THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+REM PART OF THIS FILE AT ALL TIMES.
+REM
+# set up the working directory
+set work work
+vlib work
+
+REM compile all of the files
+vlog -work work %XILINX%\verilog\src\glbl.v
+vlog -work work ..\..\implement\results\routed.v
+vlog -work work clkmgr_dcm_tb.v
+
+REM run the simulation
+vsim -c -t ps +transport_int_delays -voptargs="+acc" -L secureip -L simprims_ver -sdfmax clkmgr_dcm_tb\dut=..\..\implement\results\routed.sdf +no_notifier work.clkmgr_dcm_tb work.glbl
diff --git a/rtl/src/ipcore/clkmgr_dcm/simulation/timing/simulate_mti.do b/rtl/src/ipcore/clkmgr_dcm/simulation/timing/simulate_mti.do new file mode 100644 index 0000000..bfeb9c5 --- /dev/null +++ b/rtl/src/ipcore/clkmgr_dcm/simulation/timing/simulate_mti.do @@ -0,0 +1,65 @@ +# file: simulate_mti.do
+#
+# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
+#
+# This file contains confidential and proprietary information
+# of Xilinx, Inc. and is protected under U.S. and
+# international copyright and other intellectual property
+# laws.
+#
+# DISCLAIMER
+# This disclaimer is not a license and does not grant any
+# rights to the materials distributed herewith. Except as
+# otherwise provided in a valid license issued to you by
+# Xilinx, and to the maximum extent permitted by applicable
+# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+# (2) Xilinx shall not be liable (whether in contract or tort,
+# including negligence, or under any other theory of
+# liability) for any loss or damage of any kind or nature
+# related to, arising under or in connection with these
+# materials, including for any direct, or any indirect,
+# special, incidental, or consequential loss or damage
+# (including loss of data, profits, goodwill, or any type of
+# loss or damage suffered as a result of any action brought
+# by a third party) even if such damage or loss was
+# reasonably foreseeable or Xilinx had been advised of the
+# possibility of the same.
+#
+# CRITICAL APPLICATIONS
+# Xilinx products are not designed or intended to be fail-
+# safe, or for use in any application requiring fail-safe
+# performance, such as life-support or safety devices or
+# systems, Class III medical devices, nuclear facilities,
+# applications related to the deployment of airbags, or any
+# other applications that could lead to death, personal
+# injury, or severe property or environmental damage
+# (individually and collectively, "Critical
+# Applications"). Customer assumes the sole risk and
+# liability of any use of Xilinx products in Critical
+# Applications, subject only to applicable laws and
+# regulations governing limitations on product liability.
+#
+# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+# PART OF THIS FILE AT ALL TIMES.
+#
+
+# set up the working directory
+set work work
+vlib work
+
+# compile all of the files
+vlog -work work $env(XILINX)/verilog/src/glbl.v
+vlog -work work ../../implement/results/routed.v
+vlog -work work clkmgr_dcm_tb.v
+
+# run the simulation
+vsim -t ps +transport_int_delays -voptargs="+acc" -L secureip -L simprims_ver -sdfmax clkmgr_dcm_tb/dut=../../implement/results/routed.sdf +no_notifier work.clkmgr_dcm_tb work.glbl
+#do wave.do
+#log -r /*
+run 50000ns
+
+
diff --git a/rtl/src/ipcore/clkmgr_dcm/simulation/timing/simulate_mti.sh b/rtl/src/ipcore/clkmgr_dcm/simulation/timing/simulate_mti.sh new file mode 100644 index 0000000..b842adc --- /dev/null +++ b/rtl/src/ipcore/clkmgr_dcm/simulation/timing/simulate_mti.sh @@ -0,0 +1,61 @@ +#/bin/sh
+# file: simulate_mti.sh
+#
+# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
+#
+# This file contains confidential and proprietary information
+# of Xilinx, Inc. and is protected under U.S. and
+# international copyright and other intellectual property
+# laws.
+#
+# DISCLAIMER
+# This disclaimer is not a license and does not grant any
+# rights to the materials distributed herewith. Except as
+# otherwise provided in a valid license issued to you by
+# Xilinx, and to the maximum extent permitted by applicable
+# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+# (2) Xilinx shall not be liable (whether in contract or tort,
+# including negligence, or under any other theory of
+# liability) for any loss or damage of any kind or nature
+# related to, arising under or in connection with these
+# materials, including for any direct, or any indirect,
+# special, incidental, or consequential loss or damage
+# (including loss of data, profits, goodwill, or any type of
+# loss or damage suffered as a result of any action brought
+# by a third party) even if such damage or loss was
+# reasonably foreseeable or Xilinx had been advised of the
+# possibility of the same.
+#
+# CRITICAL APPLICATIONS
+# Xilinx products are not designed or intended to be fail-
+# safe, or for use in any application requiring fail-safe
+# performance, such as life-support or safety devices or
+# systems, Class III medical devices, nuclear facilities,
+# applications related to the deployment of airbags, or any
+# other applications that could lead to death, personal
+# injury, or severe property or environmental damage
+# (individually and collectively, "Critical
+# Applications"). Customer assumes the sole risk and
+# liability of any use of Xilinx products in Critical
+# Applications, subject only to applicable laws and
+# regulations governing limitations on product liability.
+#
+# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+# PART OF THIS FILE AT ALL TIMES.
+#
+
+# set up the working directory
+set work work
+vlib work
+
+# compile all of the files
+vlog -work work $XILINX/verilog/src/glbl.v
+vlog -work work ../../implement/results/routed.v
+vlog -work work clkmgr_dcm_tb.v
+
+# run the simulation
+vsim -c -t ps +transport_int_delays -voptargs="+acc" -L secureip -L simprims_ver -sdfmax clkmgr_dcm_tb/dut=../../implement/results/routed.sdf +no_notifier work.clkmgr_dcm_tb work.glbl
diff --git a/rtl/src/ipcore/clkmgr_dcm/simulation/timing/simulate_ncsim.sh b/rtl/src/ipcore/clkmgr_dcm/simulation/timing/simulate_ncsim.sh new file mode 100644 index 0000000..fd18dde --- /dev/null +++ b/rtl/src/ipcore/clkmgr_dcm/simulation/timing/simulate_ncsim.sh @@ -0,0 +1,64 @@ +#!/bin/sh
+# file: simulate_ncsim.sh
+#
+# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
+#
+# This file contains confidential and proprietary information
+# of Xilinx, Inc. and is protected under U.S. and
+# international copyright and other intellectual property
+# laws.
+#
+# DISCLAIMER
+# This disclaimer is not a license and does not grant any
+# rights to the materials distributed herewith. Except as
+# otherwise provided in a valid license issued to you by
+# Xilinx, and to the maximum extent permitted by applicable
+# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+# (2) Xilinx shall not be liable (whether in contract or tort,
+# including negligence, or under any other theory of
+# liability) for any loss or damage of any kind or nature
+# related to, arising under or in connection with these
+# materials, including for any direct, or any indirect,
+# special, incidental, or consequential loss or damage
+# (including loss of data, profits, goodwill, or any type of
+# loss or damage suffered as a result of any action brought
+# by a third party) even if such damage or loss was
+# reasonably foreseeable or Xilinx had been advised of the
+# possibility of the same.
+#
+# CRITICAL APPLICATIONS
+# Xilinx products are not designed or intended to be fail-
+# safe, or for use in any application requiring fail-safe
+# performance, such as life-support or safety devices or
+# systems, Class III medical devices, nuclear facilities,
+# applications related to the deployment of airbags, or any
+# other applications that could lead to death, personal
+# injury, or severe property or environmental damage
+# (individually and collectively, "Critical
+# Applications"). Customer assumes the sole risk and
+# liability of any use of Xilinx products in Critical
+# Applications, subject only to applicable laws and
+# regulations governing limitations on product liability.
+#
+# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+# PART OF THIS FILE AT ALL TIMES.
+#
+
+# set up the working directory
+mkdir work
+
+# compile all of the files
+ncvlog -work work ${XILINX}/verilog/src/glbl.v
+ncvlog -work work ../../implement/results/routed.v
+ncvlog -work work clkmgr_dcm_tb.v
+
+# elaborate and run the simulation
+ncsdfc ../../implement/results/routed.sdf
+
+ncelab -work work -access +wc -pulse_r 10 -nonotifier work.clkmgr_dcm_tb work.glbl -sdf_cmd_file sdf_cmd_file
+ncsim -input "@database -open -shm nc; probe -create -database nc -all -depth all; run 50000ns; exit" work.clkmgr_dcm_tb
+
diff --git a/rtl/src/ipcore/clkmgr_dcm/simulation/timing/simulate_vcs.sh b/rtl/src/ipcore/clkmgr_dcm/simulation/timing/simulate_vcs.sh new file mode 100644 index 0000000..26a8c27 --- /dev/null +++ b/rtl/src/ipcore/clkmgr_dcm/simulation/timing/simulate_vcs.sh @@ -0,0 +1,72 @@ +#!/bin/sh
+# file: simulate_vcs.sh
+#
+# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
+#
+# This file contains confidential and proprietary information
+# of Xilinx, Inc. and is protected under U.S. and
+# international copyright and other intellectual property
+# laws.
+#
+# DISCLAIMER
+# This disclaimer is not a license and does not grant any
+# rights to the materials distributed herewith. Except as
+# otherwise provided in a valid license issued to you by
+# Xilinx, and to the maximum extent permitted by applicable
+# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+# (2) Xilinx shall not be liable (whether in contract or tort,
+# including negligence, or under any other theory of
+# liability) for any loss or damage of any kind or nature
+# related to, arising under or in connection with these
+# materials, including for any direct, or any indirect,
+# special, incidental, or consequential loss or damage
+# (including loss of data, profits, goodwill, or any type of
+# loss or damage suffered as a result of any action brought
+# by a third party) even if such damage or loss was
+# reasonably foreseeable or Xilinx had been advised of the
+# possibility of the same.
+#
+# CRITICAL APPLICATIONS
+# Xilinx products are not designed or intended to be fail-
+# safe, or for use in any application requiring fail-safe
+# performance, such as life-support or safety devices or
+# systems, Class III medical devices, nuclear facilities,
+# applications related to the deployment of airbags, or any
+# other applications that could lead to death, personal
+# injury, or severe property or environmental damage
+# (individually and collectively, "Critical
+# Applications"). Customer assumes the sole risk and
+# liability of any use of Xilinx products in Critical
+# Applications, subject only to applicable laws and
+# regulations governing limitations on product liability.
+#
+# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+# PART OF THIS FILE AT ALL TIMES.
+#
+
+# remove old files
+rm -rf simv* csrc DVEfiles AN.DB
+
+# compile all of the files
+# Note that -sverilog is not strictly required- You can
+# remove the -sverilog if you change the type of the
+# localparam for the periods in the testbench file to
+# [63:0] from time
+ vlogan -sverilog \
+ clkmgr_dcm_tb.v \
+ ../../implement/results/routed.v
+
+
+# prepare the simulation
+vcs -sdf max:clkmgr_dcm_exdes:../../implement/results/routed.sdf +v2k -y $XILINX/verilog/src/simprims \
+ +libext+.v -debug clkmgr_dcm_tb.v ../../implement/results/routed.v
+
+# run the simulation
+./simv -ucli -i ucli_commands.key
+
+# launch the viewer
+#dve -vpd vcdplus.vpd -session vcs_session.tcl
diff --git a/rtl/src/ipcore/clkmgr_dcm/simulation/timing/ucli_commands.key b/rtl/src/ipcore/clkmgr_dcm/simulation/timing/ucli_commands.key new file mode 100644 index 0000000..b32669e --- /dev/null +++ b/rtl/src/ipcore/clkmgr_dcm/simulation/timing/ucli_commands.key @@ -0,0 +1,5 @@ +
+call {$vcdpluson}
+run 50000ns
+call {$vcdplusclose}
+quit
diff --git a/rtl/src/ipcore/clkmgr_dcm/simulation/timing/vcs_session.tcl b/rtl/src/ipcore/clkmgr_dcm/simulation/timing/vcs_session.tcl new file mode 100644 index 0000000..6cc6e24 --- /dev/null +++ b/rtl/src/ipcore/clkmgr_dcm/simulation/timing/vcs_session.tcl @@ -0,0 +1 @@ +gui_open_window Wave
diff --git a/rtl/src/ipcore/clkmgr_dcm/simulation/timing/wave.do b/rtl/src/ipcore/clkmgr_dcm/simulation/timing/wave.do new file mode 100644 index 0000000..7cc804b --- /dev/null +++ b/rtl/src/ipcore/clkmgr_dcm/simulation/timing/wave.do @@ -0,0 +1,71 @@ +# file: wave.do
+#
+# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
+#
+# This file contains confidential and proprietary information
+# of Xilinx, Inc. and is protected under U.S. and
+# international copyright and other intellectual property
+# laws.
+#
+# DISCLAIMER
+# This disclaimer is not a license and does not grant any
+# rights to the materials distributed herewith. Except as
+# otherwise provided in a valid license issued to you by
+# Xilinx, and to the maximum extent permitted by applicable
+# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+# (2) Xilinx shall not be liable (whether in contract or tort,
+# including negligence, or under any other theory of
+# liability) for any loss or damage of any kind or nature
+# related to, arising under or in connection with these
+# materials, including for any direct, or any indirect,
+# special, incidental, or consequential loss or damage
+# (including loss of data, profits, goodwill, or any type of
+# loss or damage suffered as a result of any action brought
+# by a third party) even if such damage or loss was
+# reasonably foreseeable or Xilinx had been advised of the
+# possibility of the same.
+#
+# CRITICAL APPLICATIONS
+# Xilinx products are not designed or intended to be fail-
+# safe, or for use in any application requiring fail-safe
+# performance, such as life-support or safety devices or
+# systems, Class III medical devices, nuclear facilities,
+# applications related to the deployment of airbags, or any
+# other applications that could lead to death, personal
+# injury, or severe property or environmental damage
+# (individually and collectively, "Critical
+# Applications"). Customer assumes the sole risk and
+# liability of any use of Xilinx products in Critical
+# Applications, subject only to applicable laws and
+# regulations governing limitations on product liability.
+#
+# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+# PART OF THIS FILE AT ALL TIMES.
+#
+
+onerror {resume}
+quietly WaveActivateNextPane {} 0
+add wave -noupdate /clkmgr_dcm_tb/CLK_IN1
+add wave -noupdate /clkmgr_dcm_tb/COUNT
+add wave -noupdate /clkmgr_dcm_tb/RESET
+TreeUpdate [SetDefaultTree]
+WaveRestoreCursors {{Cursor 1} {3223025 ps} 0}
+configure wave -namecolwidth 238
+configure wave -valuecolwidth 107
+configure wave -justifyvalue left
+configure wave -signalnamewidth 0
+configure wave -snapdistance 10
+configure wave -datasetprefix 0
+configure wave -rowmargin 4
+configure wave -childrowmargin 2
+configure wave -gridoffset 0
+configure wave -gridperiod 1
+configure wave -griddelta 40
+configure wave -timeline 0
+configure wave -timelineunits ps
+update
+WaveRestoreZoom {0 ps} {74848022 ps}
|