diff options
Diffstat (limited to 'common')
57 files changed, 0 insertions, 3834 deletions
diff --git a/common/rtl/ipcore/_xmsgs/cg.xmsgs b/common/rtl/ipcore/_xmsgs/cg.xmsgs deleted file mode 100644 index 985e6e3..0000000 --- a/common/rtl/ipcore/_xmsgs/cg.xmsgs +++ /dev/null @@ -1,27 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?>
-<!-- IMPORTANT: This is an internal file that has been generated
- by the Xilinx ISE software. Any direct editing or
- changes made to this file may result in unpredictable
- behavior or data corruption. It is strongly advised that
- users do not edit the contents of this file. -->
-<messages> -<msg type="info" file="sim" num="172" delta="old" >Generating IP...
-</msg>
- -<msg type="warning" file="sim" num="0" delta="new" ><arg fmt="%s" index="1">A core named 'clkmgr_dcm' already exists in the project. Output products for this core may be overwritten.</arg>
-</msg>
- -<msg type="warning" file="sim" num="0" delta="new" ><arg fmt="%s" index="1">A core named 'clkmgr_dcm' already exists in the project. Output products for this core may be overwritten.</arg>
-</msg>
- -<msg type="warning" file="sim" num="0" delta="new" ><arg fmt="%s" index="1">Component clk_wiz_v3_6 does not have a valid model name for Verilog synthesis</arg>
-</msg>
- -<msg type="info" file="sim" num="949" delta="old" >Finished generation of ASY schematic symbol.
-</msg>
- -<msg type="info" file="sim" num="948" delta="old" >Finished FLIST file generation.
-</msg>
- -</messages> -
diff --git a/common/rtl/ipcore/clkmgr_dcm.asy b/common/rtl/ipcore/clkmgr_dcm.asy deleted file mode 100644 index 016d02a..0000000 --- a/common/rtl/ipcore/clkmgr_dcm.asy +++ /dev/null @@ -1,25 +0,0 @@ -Version 4 -SymbolType BLOCK -TEXT 32 32 LEFT 4 clkmgr_dcm -RECTANGLE Normal 32 32 576 1088 -LINE Normal 0 80 32 80 -PIN 0 80 LEFT 36 -PINATTR PinName clk_in1 -PINATTR Polarity IN -LINE Normal 0 432 32 432 -PIN 0 432 LEFT 36 -PINATTR PinName reset -PINATTR Polarity IN -LINE Normal 608 80 576 80 -PIN 608 80 RIGHT 36 -PINATTR PinName clk_out1 -PINATTR Polarity OUT -LINE Normal 608 880 576 880 -PIN 608 880 RIGHT 36 -PINATTR PinName input_clk_stopped -PINATTR Polarity OUT -LINE Normal 608 1008 576 1008 -PIN 608 1008 RIGHT 36 -PINATTR PinName clk_valid -PINATTR Polarity OUT -
diff --git a/common/rtl/ipcore/clkmgr_dcm.gise b/common/rtl/ipcore/clkmgr_dcm.gise deleted file mode 100644 index ed6d0f7..0000000 --- a/common/rtl/ipcore/clkmgr_dcm.gise +++ /dev/null @@ -1,31 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
-<generated_project xmlns="http://www.xilinx.com/XMLSchema" xmlns:xil_pn="http://www.xilinx.com/XMLSchema">
-
- <!-- -->
-
- <!-- For tool use only. Do not edit. -->
-
- <!-- -->
-
- <!-- ProjectNavigator created generated project file. -->
-
- <!-- For use in tracking generated file and other information -->
-
- <!-- allowing preservation of process status. -->
-
- <!-- -->
-
- <!-- Copyright (c) 1995-2013 Xilinx, Inc. All rights reserved. -->
-
- <version xmlns="http://www.xilinx.com/XMLSchema">11.1</version>
-
- <sourceproject xmlns="http://www.xilinx.com/XMLSchema" xil_pn:fileType="FILE_XISE" xil_pn:name="clkmgr_dcm.xise"/>
-
- <files xmlns="http://www.xilinx.com/XMLSchema">
- <file xil_pn:fileType="FILE_ASY" xil_pn:name="clkmgr_dcm.asy" xil_pn:origination="imported"/>
- <file xil_pn:fileType="FILE_VEO" xil_pn:name="clkmgr_dcm.veo" xil_pn:origination="imported"/>
- </files>
-
- <transforms xmlns="http://www.xilinx.com/XMLSchema"/>
-
-</generated_project>
diff --git a/common/rtl/ipcore/clkmgr_dcm.ncf b/common/rtl/ipcore/clkmgr_dcm.ncf deleted file mode 100644 index ef4e259..0000000 --- a/common/rtl/ipcore/clkmgr_dcm.ncf +++ /dev/null @@ -1,60 +0,0 @@ -# file: clkmgr_dcm.ucf -# -# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved. -# -# This file contains confidential and proprietary information -# of Xilinx, Inc. and is protected under U.S. and -# international copyright and other intellectual property -# laws. -# -# DISCLAIMER -# This disclaimer is not a license and does not grant any -# rights to the materials distributed herewith. Except as -# otherwise provided in a valid license issued to you by -# Xilinx, and to the maximum extent permitted by applicable -# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -# (2) Xilinx shall not be liable (whether in contract or tort, -# including negligence, or under any other theory of -# liability) for any loss or damage of any kind or nature -# related to, arising under or in connection with these -# materials, including for any direct, or any indirect, -# special, incidental, or consequential loss or damage -# (including loss of data, profits, goodwill, or any type of -# loss or damage suffered as a result of any action brought -# by a third party) even if such damage or loss was -# reasonably foreseeable or Xilinx had been advised of the -# possibility of the same. -# -# CRITICAL APPLICATIONS -# Xilinx products are not designed or intended to be fail- -# safe, or for use in any application requiring fail-safe -# performance, such as life-support or safety devices or -# systems, Class III medical devices, nuclear facilities, -# applications related to the deployment of airbags, or any -# other applications that could lead to death, personal -# injury, or severe property or environmental damage -# (individually and collectively, "Critical -# Applications"). Customer assumes the sole risk and -# liability of any use of Xilinx products in Critical -# Applications, subject only to applicable laws and -# regulations governing limitations on product liability. -# -# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -# PART OF THIS FILE AT ALL TIMES. -# - -# Input clock periods. These duplicate the values entered for the -# input clocks. You can use these to time your system -#---------------------------------------------------------------- -NET "CLK_IN1" TNM_NET = "CLK_IN1"; -TIMESPEC "TS_CLK_IN1" = PERIOD "CLK_IN1" 20.0 ns HIGH 50% INPUT_JITTER 200.0ps; - - -# FALSE PATH constraints -PIN "RESET" TIG; - - diff --git a/common/rtl/ipcore/clkmgr_dcm.sym b/common/rtl/ipcore/clkmgr_dcm.sym deleted file mode 100644 index 7d178b8..0000000 --- a/common/rtl/ipcore/clkmgr_dcm.sym +++ /dev/null @@ -1,24 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?>
-<symbol version="7" name="clkmgr_dcm">
- <symboltype>BLOCK</symboltype>
- <timestamp>2015-1-28T21:56:19</timestamp>
- <pin polarity="Input" x="0" y="80" name="clk_in1" />
- <pin polarity="Input" x="0" y="432" name="reset" />
- <pin polarity="Output" x="608" y="80" name="clk_out1" />
- <pin polarity="Output" x="608" y="880" name="input_clk_stopped" />
- <pin polarity="Output" x="608" y="1008" name="clk_valid" />
- <graph>
- <text style="fontsize:40;fontname:Arial" x="32" y="32">clkmgr_dcm</text>
- <rect width="544" x="32" y="32" height="1056" />
- <line x2="32" y1="80" y2="80" x1="0" />
- <attrtext style="fontsize:24;fontname:Arial" attrname="PinName" x="36" y="80" type="pin clk_in1" />
- <line x2="32" y1="432" y2="432" x1="0" />
- <attrtext style="fontsize:24;fontname:Arial" attrname="PinName" x="36" y="432" type="pin reset" />
- <line x2="576" y1="80" y2="80" x1="608" />
- <attrtext style="alignment:RIGHT;fontsize:24;fontname:Arial" attrname="PinName" x="572" y="80" type="pin clk_out1" />
- <line x2="576" y1="880" y2="880" x1="608" />
- <attrtext style="alignment:RIGHT;fontsize:24;fontname:Arial" attrname="PinName" x="572" y="880" type="pin input_clk_stopped" />
- <line x2="576" y1="1008" y2="1008" x1="608" />
- <attrtext style="alignment:RIGHT;fontsize:24;fontname:Arial" attrname="PinName" x="572" y="1008" type="pin clk_valid" />
- </graph>
-</symbol>
diff --git a/common/rtl/ipcore/clkmgr_dcm.ucf b/common/rtl/ipcore/clkmgr_dcm.ucf deleted file mode 100644 index 658fdb4..0000000 --- a/common/rtl/ipcore/clkmgr_dcm.ucf +++ /dev/null @@ -1,59 +0,0 @@ -# file: clkmgr_dcm.ucf
-#
-# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
-#
-# This file contains confidential and proprietary information
-# of Xilinx, Inc. and is protected under U.S. and
-# international copyright and other intellectual property
-# laws.
-#
-# DISCLAIMER
-# This disclaimer is not a license and does not grant any
-# rights to the materials distributed herewith. Except as
-# otherwise provided in a valid license issued to you by
-# Xilinx, and to the maximum extent permitted by applicable
-# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-# (2) Xilinx shall not be liable (whether in contract or tort,
-# including negligence, or under any other theory of
-# liability) for any loss or damage of any kind or nature
-# related to, arising under or in connection with these
-# materials, including for any direct, or any indirect,
-# special, incidental, or consequential loss or damage
-# (including loss of data, profits, goodwill, or any type of
-# loss or damage suffered as a result of any action brought
-# by a third party) even if such damage or loss was
-# reasonably foreseeable or Xilinx had been advised of the
-# possibility of the same.
-#
-# CRITICAL APPLICATIONS
-# Xilinx products are not designed or intended to be fail-
-# safe, or for use in any application requiring fail-safe
-# performance, such as life-support or safety devices or
-# systems, Class III medical devices, nuclear facilities,
-# applications related to the deployment of airbags, or any
-# other applications that could lead to death, personal
-# injury, or severe property or environmental damage
-# (individually and collectively, "Critical
-# Applications"). Customer assumes the sole risk and
-# liability of any use of Xilinx products in Critical
-# Applications, subject only to applicable laws and
-# regulations governing limitations on product liability.
-#
-# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-# PART OF THIS FILE AT ALL TIMES.
-#
-
-# Input clock periods. These duplicate the values entered for the
-# input clocks. You can use these to time your system
-#----------------------------------------------------------------
-NET "CLK_IN1" TNM_NET = "CLK_IN1";
-TIMESPEC "TS_CLK_IN1" = PERIOD "CLK_IN1" 20.0 ns HIGH 50% INPUT_JITTER 200.0ps;
-
-
-# FALSE PATH constraints
-PIN "RESET" TIG;
-
diff --git a/common/rtl/ipcore/clkmgr_dcm.veo b/common/rtl/ipcore/clkmgr_dcm.veo deleted file mode 100644 index c4e1d31..0000000 --- a/common/rtl/ipcore/clkmgr_dcm.veo +++ /dev/null @@ -1,79 +0,0 @@ -//
-// (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
-//
-// This file contains confidential and proprietary information
-// of Xilinx, Inc. and is protected under U.S. and
-// international copyright and other intellectual property
-// laws.
-//
-// DISCLAIMER
-// This disclaimer is not a license and does not grant any
-// rights to the materials distributed herewith. Except as
-// otherwise provided in a valid license issued to you by
-// Xilinx, and to the maximum extent permitted by applicable
-// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-// (2) Xilinx shall not be liable (whether in contract or tort,
-// including negligence, or under any other theory of
-// liability) for any loss or damage of any kind or nature
-// related to, arising under or in connection with these
-// materials, including for any direct, or any indirect,
-// special, incidental, or consequential loss or damage
-// (including loss of data, profits, goodwill, or any type of
-// loss or damage suffered as a result of any action brought
-// by a third party) even if such damage or loss was
-// reasonably foreseeable or Xilinx had been advised of the
-// possibility of the same.
-//
-// CRITICAL APPLICATIONS
-// Xilinx products are not designed or intended to be fail-
-// safe, or for use in any application requiring fail-safe
-// performance, such as life-support or safety devices or
-// systems, Class III medical devices, nuclear facilities,
-// applications related to the deployment of airbags, or any
-// other applications that could lead to death, personal
-// injury, or severe property or environmental damage
-// (individually and collectively, "Critical
-// Applications"). Customer assumes the sole risk and
-// liability of any use of Xilinx products in Critical
-// Applications, subject only to applicable laws and
-// regulations governing limitations on product liability.
-//
-// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-// PART OF THIS FILE AT ALL TIMES.
-//
-//----------------------------------------------------------------------------
-// User entered comments
-//----------------------------------------------------------------------------
-// None
-//
-//----------------------------------------------------------------------------
-// "Output Output Phase Duty Pk-to-Pk Phase"
-// "Clock Freq (MHz) (degrees) Cycle (%) Jitter (ps) Error (ps)"
-//----------------------------------------------------------------------------
-// CLK_OUT1____50.000______0.000______50.0______200.000____150.000
-//
-//----------------------------------------------------------------------------
-// "Input Clock Freq (MHz) Input Jitter (UI)"
-//----------------------------------------------------------------------------
-// __primary______________50____________0.010
-
-// The following must be inserted into your Verilog file for this
-// core to be instantiated. Change the instance name and port connections
-// (in parentheses) to your own signal names.
-
-//----------- Begin Cut here for INSTANTIATION Template ---// INST_TAG
-
- clkmgr_dcm instance_name
- (// Clock in ports
- .CLK_IN1(CLK_IN1), // IN
- // Clock out ports
- .CLK_OUT1(CLK_OUT1), // OUT
- // Status and control signals
- .RESET(RESET),// IN
- .INPUT_CLK_STOPPED(INPUT_CLK_STOPPED), // OUT
- .CLK_VALID(CLK_VALID)); // OUT
-// INST_TAG_END ------ End INSTANTIATION Template ---------
diff --git a/common/rtl/ipcore/clkmgr_dcm.xco b/common/rtl/ipcore/clkmgr_dcm.xco deleted file mode 100644 index 37f1a1d..0000000 --- a/common/rtl/ipcore/clkmgr_dcm.xco +++ /dev/null @@ -1,269 +0,0 @@ -##############################################################
-#
-# Xilinx Core Generator version 14.7
-# Date: Sun Feb 01 07:49:40 2015
-#
-##############################################################
-#
-# This file contains the customisation parameters for a
-# Xilinx CORE Generator IP GUI. It is strongly recommended
-# that you do not manually alter this file as it may cause
-# unexpected and unsupported behavior.
-#
-##############################################################
-#
-# Generated from component: xilinx.com:ip:clk_wiz:3.6
-#
-##############################################################
-#
-# BEGIN Project Options
-SET addpads = false
-SET asysymbol = true
-SET busformat = BusFormatAngleBracketNotRipped
-SET createndf = false
-SET designentry = Verilog
-SET device = xc6slx45
-SET devicefamily = spartan6
-SET flowvendor = Other
-SET formalverification = false
-SET foundationsym = false
-SET implementationfiletype = Ngc
-SET package = csg324
-SET removerpms = false
-SET simulationfiles = Behavioral
-SET speedgrade = -3
-SET verilogsim = true
-SET vhdlsim = false
-# END Project Options
-# BEGIN Select
-SELECT Clocking_Wizard xilinx.com:ip:clk_wiz:3.6
-# END Select
-# BEGIN Parameters
-CSET calc_done=DONE
-CSET clk_in_sel_port=CLK_IN_SEL
-CSET clk_out1_port=CLK_OUT1
-CSET clk_out1_use_fine_ps_gui=false
-CSET clk_out2_port=CLK_OUT2
-CSET clk_out2_use_fine_ps_gui=false
-CSET clk_out3_port=CLK_OUT3
-CSET clk_out3_use_fine_ps_gui=false
-CSET clk_out4_port=CLK_OUT4
-CSET clk_out4_use_fine_ps_gui=false
-CSET clk_out5_port=CLK_OUT5
-CSET clk_out5_use_fine_ps_gui=false
-CSET clk_out6_port=CLK_OUT6
-CSET clk_out6_use_fine_ps_gui=false
-CSET clk_out7_port=CLK_OUT7
-CSET clk_out7_use_fine_ps_gui=false
-CSET clk_valid_port=CLK_VALID
-CSET clkfb_in_n_port=CLKFB_IN_N
-CSET clkfb_in_p_port=CLKFB_IN_P
-CSET clkfb_in_port=CLKFB_IN
-CSET clkfb_in_signaling=SINGLE
-CSET clkfb_out_n_port=CLKFB_OUT_N
-CSET clkfb_out_p_port=CLKFB_OUT_P
-CSET clkfb_out_port=CLKFB_OUT
-CSET clkfb_stopped_port=CLKFB_STOPPED
-CSET clkin1_jitter_ps=200.0
-CSET clkin1_ui_jitter=0.010
-CSET clkin2_jitter_ps=100.0
-CSET clkin2_ui_jitter=0.010
-CSET clkout1_drives=BUFG
-CSET clkout1_requested_duty_cycle=50.0
-CSET clkout1_requested_out_freq=50
-CSET clkout1_requested_phase=0.000
-CSET clkout2_drives=BUFG
-CSET clkout2_requested_duty_cycle=50.0
-CSET clkout2_requested_out_freq=50
-CSET clkout2_requested_phase=0
-CSET clkout2_used=false
-CSET clkout3_drives=BUFG
-CSET clkout3_requested_duty_cycle=50.0
-CSET clkout3_requested_out_freq=100.000
-CSET clkout3_requested_phase=0.000
-CSET clkout3_used=false
-CSET clkout4_drives=BUFG
-CSET clkout4_requested_duty_cycle=50.0
-CSET clkout4_requested_out_freq=100.000
-CSET clkout4_requested_phase=0.000
-CSET clkout4_used=false
-CSET clkout5_drives=BUFG
-CSET clkout5_requested_duty_cycle=50.0
-CSET clkout5_requested_out_freq=100.000
-CSET clkout5_requested_phase=0.000
-CSET clkout5_used=false
-CSET clkout6_drives=BUFG
-CSET clkout6_requested_duty_cycle=50.0
-CSET clkout6_requested_out_freq=100.000
-CSET clkout6_requested_phase=0.000
-CSET clkout6_used=false
-CSET clkout7_drives=BUFG
-CSET clkout7_requested_duty_cycle=50.0
-CSET clkout7_requested_out_freq=100.000
-CSET clkout7_requested_phase=0.000
-CSET clkout7_used=false
-CSET clock_mgr_type=MANUAL
-CSET component_name=clkmgr_dcm
-CSET daddr_port=DADDR
-CSET dclk_port=DCLK
-CSET dcm_clk_feedback=1X
-CSET dcm_clk_out1_port=CLK0
-CSET dcm_clk_out2_port=CLK0
-CSET dcm_clk_out3_port=CLK0
-CSET dcm_clk_out4_port=CLK0
-CSET dcm_clk_out5_port=CLK0
-CSET dcm_clk_out6_port=CLK0
-CSET dcm_clkdv_divide=2.0
-CSET dcm_clkfx_divide=1
-CSET dcm_clkfx_multiply=4
-CSET dcm_clkgen_clk_out1_port=CLKFX
-CSET dcm_clkgen_clk_out2_port=CLKFX
-CSET dcm_clkgen_clk_out3_port=CLKFX
-CSET dcm_clkgen_clkfx_divide=1
-CSET dcm_clkgen_clkfx_md_max=0.000
-CSET dcm_clkgen_clkfx_multiply=4
-CSET dcm_clkgen_clkfxdv_divide=2
-CSET dcm_clkgen_clkin_period=10.000
-CSET dcm_clkgen_notes=None
-CSET dcm_clkgen_spread_spectrum=NONE
-CSET dcm_clkgen_startup_wait=false
-CSET dcm_clkin_divide_by_2=false
-CSET dcm_clkin_period=20.000
-CSET dcm_clkout_phase_shift=NONE
-CSET dcm_deskew_adjust=SYSTEM_SYNCHRONOUS
-CSET dcm_notes=None
-CSET dcm_phase_shift=0
-CSET dcm_pll_cascade=NONE
-CSET dcm_startup_wait=false
-CSET den_port=DEN
-CSET din_port=DIN
-CSET dout_port=DOUT
-CSET drdy_port=DRDY
-CSET dwe_port=DWE
-CSET feedback_source=FDBK_AUTO
-CSET in_freq_units=Units_MHz
-CSET in_jitter_units=Units_UI
-CSET input_clk_stopped_port=INPUT_CLK_STOPPED
-CSET jitter_options=UI
-CSET jitter_sel=No_Jitter
-CSET locked_port=LOCKED
-CSET mmcm_bandwidth=OPTIMIZED
-CSET mmcm_clkfbout_mult_f=4.000
-CSET mmcm_clkfbout_phase=0.000
-CSET mmcm_clkfbout_use_fine_ps=false
-CSET mmcm_clkin1_period=10.000
-CSET mmcm_clkin2_period=10.000
-CSET mmcm_clkout0_divide_f=4.000
-CSET mmcm_clkout0_duty_cycle=0.500
-CSET mmcm_clkout0_phase=0.000
-CSET mmcm_clkout0_use_fine_ps=false
-CSET mmcm_clkout1_divide=1
-CSET mmcm_clkout1_duty_cycle=0.500
-CSET mmcm_clkout1_phase=0.000
-CSET mmcm_clkout1_use_fine_ps=false
-CSET mmcm_clkout2_divide=1
-CSET mmcm_clkout2_duty_cycle=0.500
-CSET mmcm_clkout2_phase=0.000
-CSET mmcm_clkout2_use_fine_ps=false
-CSET mmcm_clkout3_divide=1
-CSET mmcm_clkout3_duty_cycle=0.500
-CSET mmcm_clkout3_phase=0.000
-CSET mmcm_clkout3_use_fine_ps=false
-CSET mmcm_clkout4_cascade=false
-CSET mmcm_clkout4_divide=1
-CSET mmcm_clkout4_duty_cycle=0.500
-CSET mmcm_clkout4_phase=0.000
-CSET mmcm_clkout4_use_fine_ps=false
-CSET mmcm_clkout5_divide=1
-CSET mmcm_clkout5_duty_cycle=0.500
-CSET mmcm_clkout5_phase=0.000
-CSET mmcm_clkout5_use_fine_ps=false
-CSET mmcm_clkout6_divide=1
-CSET mmcm_clkout6_duty_cycle=0.500
-CSET mmcm_clkout6_phase=0.000
-CSET mmcm_clkout6_use_fine_ps=false
-CSET mmcm_clock_hold=false
-CSET mmcm_compensation=ZHOLD
-CSET mmcm_divclk_divide=1
-CSET mmcm_notes=None
-CSET mmcm_ref_jitter1=0.010
-CSET mmcm_ref_jitter2=0.010
-CSET mmcm_startup_wait=false
-CSET num_out_clks=1
-CSET override_dcm=false
-CSET override_dcm_clkgen=false
-CSET override_mmcm=false
-CSET override_pll=false
-CSET platform=nt
-CSET pll_bandwidth=OPTIMIZED
-CSET pll_clk_feedback=CLKFBOUT
-CSET pll_clkfbout_mult=8
-CSET pll_clkfbout_phase=0.000
-CSET pll_clkin_period=20.0
-CSET pll_clkout0_divide=2
-CSET pll_clkout0_duty_cycle=0.500
-CSET pll_clkout0_phase=0.000
-CSET pll_clkout1_divide=10
-CSET pll_clkout1_duty_cycle=0.500
-CSET pll_clkout1_phase=0.000
-CSET pll_clkout2_divide=1
-CSET pll_clkout2_duty_cycle=0.500
-CSET pll_clkout2_phase=0.000
-CSET pll_clkout3_divide=1
-CSET pll_clkout3_duty_cycle=0.500
-CSET pll_clkout3_phase=0.000
-CSET pll_clkout4_divide=1
-CSET pll_clkout4_duty_cycle=0.500
-CSET pll_clkout4_phase=0.000
-CSET pll_clkout5_divide=1
-CSET pll_clkout5_duty_cycle=0.500
-CSET pll_clkout5_phase=0.000
-CSET pll_compensation=SYSTEM_SYNCHRONOUS
-CSET pll_divclk_divide=1
-CSET pll_notes=None
-CSET pll_ref_jitter=0.010
-CSET power_down_port=POWER_DOWN
-CSET prim_in_freq=50
-CSET prim_in_jitter=0.010
-CSET prim_source=No_buffer
-CSET primary_port=CLK_IN1
-CSET primitive=MMCM
-CSET primtype_sel=DCM_SP
-CSET psclk_port=PSCLK
-CSET psdone_port=PSDONE
-CSET psen_port=PSEN
-CSET psincdec_port=PSINCDEC
-CSET relative_inclk=REL_PRIMARY
-CSET reset_port=RESET
-CSET secondary_in_freq=100.000
-CSET secondary_in_jitter=0.010
-CSET secondary_port=CLK_IN2
-CSET secondary_source=Single_ended_clock_capable_pin
-CSET ss_mod_freq=250
-CSET ss_mode=CENTER_HIGH
-CSET status_port=STATUS
-CSET summary_strings=empty
-CSET use_clk_valid=true
-CSET use_clkfb_stopped=false
-CSET use_dyn_phase_shift=false
-CSET use_dyn_reconfig=false
-CSET use_freeze=false
-CSET use_freq_synth=true
-CSET use_inclk_stopped=true
-CSET use_inclk_switchover=false
-CSET use_locked=false
-CSET use_max_i_jitter=false
-CSET use_min_o_jitter=false
-CSET use_min_power=false
-CSET use_phase_alignment=true
-CSET use_power_down=false
-CSET use_reset=true
-CSET use_spread_spectrum=false
-CSET use_spread_spectrum_1=false
-CSET use_status=false
-# END Parameters
-# BEGIN Extra information
-MISC pkg_timestamp=2012-05-10T12:44:55Z
-# END Extra information
-GENERATE
-# CRC: d6857c2d
diff --git a/common/rtl/ipcore/clkmgr_dcm.xdc b/common/rtl/ipcore/clkmgr_dcm.xdc deleted file mode 100644 index 9ecc102..0000000 --- a/common/rtl/ipcore/clkmgr_dcm.xdc +++ /dev/null @@ -1,67 +0,0 @@ -# file: clkmgr_dcm.xdc
-#
-# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
-#
-# This file contains confidential and proprietary information
-# of Xilinx, Inc. and is protected under U.S. and
-# international copyright and other intellectual property
-# laws.
-#
-# DISCLAIMER
-# This disclaimer is not a license and does not grant any
-# rights to the materials distributed herewith. Except as
-# otherwise provided in a valid license issued to you by
-# Xilinx, and to the maximum extent permitted by applicable
-# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-# (2) Xilinx shall not be liable (whether in contract or tort,
-# including negligence, or under any other theory of
-# liability) for any loss or damage of any kind or nature
-# related to, arising under or in connection with these
-# materials, including for any direct, or any indirect,
-# special, incidental, or consequential loss or damage
-# (including loss of data, profits, goodwill, or any type of
-# loss or damage suffered as a result of any action brought
-# by a third party) even if such damage or loss was
-# reasonably foreseeable or Xilinx had been advised of the
-# possibility of the same.
-#
-# CRITICAL APPLICATIONS
-# Xilinx products are not designed or intended to be fail-
-# safe, or for use in any application requiring fail-safe
-# performance, such as life-support or safety devices or
-# systems, Class III medical devices, nuclear facilities,
-# applications related to the deployment of airbags, or any
-# other applications that could lead to death, personal
-# injury, or severe property or environmental damage
-# (individually and collectively, "Critical
-# Applications"). Customer assumes the sole risk and
-# liability of any use of Xilinx products in Critical
-# Applications, subject only to applicable laws and
-# regulations governing limitations on product liability.
-#
-# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-# PART OF THIS FILE AT ALL TIMES.
-#
-
-# Input clock periods. These duplicate the values entered for the
-# input clocks. You can use these to time your system
-#----------------------------------------------------------------
-create_clock -name CLK_IN1 -period 20.0 [get_ports CLK_IN1]
-set_propagated_clock CLK_IN1
-set_input_jitter CLK_IN1 0.2
-
-set_false_path -from [get_ports "RESET"]
-
-# Derived clock periods. These are commented out because they are
-# automatically propogated by the tools
-# However, if you'd like to use them for module level testing, you
-# can copy them into your module level timing checks
-#-----------------------------------------------------------------
-
-#-----------------------------------------------------------------
-
-#-----------------------------------------------------------------
diff --git a/common/rtl/ipcore/clkmgr_dcm.xise b/common/rtl/ipcore/clkmgr_dcm.xise deleted file mode 100644 index 7369d3b..0000000 --- a/common/rtl/ipcore/clkmgr_dcm.xise +++ /dev/null @@ -1,74 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="no" ?> -<project xmlns="http://www.xilinx.com/XMLSchema" xmlns:xil_pn="http://www.xilinx.com/XMLSchema"> - - <header> - <!-- ISE source project file created by Project Navigator. --> - <!-- --> - <!-- This file contains project source information including a list of --> - <!-- project source files, project and process properties. This file, --> - <!-- along with the project source files, is sufficient to open and --> - <!-- implement in ISE Project Navigator. --> - <!-- --> - <!-- Copyright (c) 1995-2013 Xilinx, Inc. All rights reserved. --> - </header> - - <version xil_pn:ise_version="14.7" xil_pn:schema_version="2"/> - - <files> - <file xil_pn:name="clkmgr_dcm.ucf" xil_pn:type="FILE_UCF"> - <association xil_pn:name="Implementation" xil_pn:seqID="0"/> - </file> - <file xil_pn:name="clkmgr_dcm.v" xil_pn:type="FILE_VERILOG"> - <association xil_pn:name="BehavioralSimulation" xil_pn:seqID="1"/> - <association xil_pn:name="Implementation" xil_pn:seqID="1"/> - <association xil_pn:name="PostMapSimulation" xil_pn:seqID="3"/> - <association xil_pn:name="PostRouteSimulation" xil_pn:seqID="3"/> - <association xil_pn:name="PostTranslateSimulation" xil_pn:seqID="3"/> - </file> - </files> - - <properties> - <property xil_pn:name="Auto Implementation Top" xil_pn:value="false" xil_pn:valueState="non-default"/> - <property xil_pn:name="Device" xil_pn:value="xc6slx45" xil_pn:valueState="non-default"/> - <property xil_pn:name="Device Family" xil_pn:value="Spartan6" xil_pn:valueState="non-default"/> - <property xil_pn:name="Enable Internal Done Pipe" xil_pn:value="true" xil_pn:valueState="non-default"/> - <property xil_pn:name="Implementation Stop View" xil_pn:value="PreSynthesis" xil_pn:valueState="non-default"/> - <property xil_pn:name="Implementation Top" xil_pn:value="Module|clkmgr_dcm" xil_pn:valueState="non-default"/> - <property xil_pn:name="Implementation Top File" xil_pn:value="clkmgr_dcm.v" xil_pn:valueState="non-default"/> - <property xil_pn:name="Implementation Top Instance Path" xil_pn:value="/clkmgr_dcm" xil_pn:valueState="non-default"/> - <property xil_pn:name="Package" xil_pn:value="csg324" xil_pn:valueState="non-default"/> - <property xil_pn:name="Preferred Language" xil_pn:value="Verilog" xil_pn:valueState="default"/> - <property xil_pn:name="Project Generator" xil_pn:value="CoreGen" xil_pn:valueState="non-default"/> - <property xil_pn:name="Property Specification in Project File" xil_pn:value="Store all values" xil_pn:valueState="default"/> - <property xil_pn:name="Simulator" xil_pn:value="ISim (VHDL/Verilog)" xil_pn:valueState="default"/> - <property xil_pn:name="Speed Grade" xil_pn:value="-3" xil_pn:valueState="default"/> - <property xil_pn:name="Synthesis Tool" xil_pn:value="XST (VHDL/Verilog)" xil_pn:valueState="default"/> - <property xil_pn:name="Top-Level Source Type" xil_pn:value="HDL" xil_pn:valueState="default"/> - <property xil_pn:name="Working Directory" xil_pn:value="." xil_pn:valueState="non-default"/> - <!-- --> - <!-- The following properties are for internal use only. These should not be modified.--> - <!-- --> - <property xil_pn:name="PROP_DesignName" xil_pn:value="clkmgr_dcm" xil_pn:valueState="non-default"/> - <property xil_pn:name="PROP_DevFamilyPMName" xil_pn:value="spartan6" xil_pn:valueState="default"/> - <property xil_pn:name="PROP_intProjectCreationTimestamp" xil_pn:value="2015-02-01T08:50:04" xil_pn:valueState="non-default"/> - <property xil_pn:name="PROP_intWbtProjectID" xil_pn:value="67BEB73269CA45ADBC7997434CEC13CB" xil_pn:valueState="non-default"/> - <property xil_pn:name="PROP_intWorkingDirLocWRTProjDir" xil_pn:value="Same" xil_pn:valueState="non-default"/> - <property xil_pn:name="PROP_intWorkingDirUsed" xil_pn:value="No" xil_pn:valueState="non-default"/> - </properties> - - <bindings> - <binding xil_pn:location="/clkmgr_dcm" xil_pn:name="clkmgr_dcm.ucf"/> - </bindings> - - <libraries/> - - <autoManagedFiles> - <!-- The following files are identified by `include statements in verilog --> - <!-- source files and are automatically managed by Project Navigator. --> - <!-- --> - <!-- Do not hand-edit this section, as it will be overwritten when the --> - <!-- project is analyzed based on files automatically identified as --> - <!-- include files. --> - </autoManagedFiles> - -</project> diff --git a/common/rtl/ipcore/clkmgr_dcm/clk_wiz_v3_6_readme.txt b/common/rtl/ipcore/clkmgr_dcm/clk_wiz_v3_6_readme.txt deleted file mode 100644 index 91dcdd0..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/clk_wiz_v3_6_readme.txt +++ /dev/null @@ -1,184 +0,0 @@ -CHANGE LOG for LogiCORE Clocking Wizard V3.6 - - Release Date: June 19, 2013 --------------------------------------------------------------------------------- - -Table of Contents - -1. INTRODUCTION -2. DEVICE SUPPORT -3. NEW FEATURE HISTORY -4. RESOLVED ISSUES -5. KNOWN ISSUES & LIMITATIONS -6. TECHNICAL SUPPORT & FEEDBACK -7. CORE RELEASE HISTORY -8. LEGAL DISCLAIMER - --------------------------------------------------------------------------------- - - -1. INTRODUCTION - -For installation instructions for this release, please go to: - - http://www.xilinx.com/ipcenter/coregen/ip_update_install_instructions.htm - -For system requirements: - - http://www.xilinx.com/ipcenter/coregen/ip_update_system_requirements.htm - -This file contains release notes for the Xilinx LogiCORE IP Clocking Wizard v3.6 -solution. For the latest core updates, see the product page at: - - http://www.xilinx.com/products/design_resources/conn_central/solution_kits/wizards/ - -................................................................................ - -2. DEVICE SUPPORT - - - 2.1 ISE - - - The following device families are supported by the core for this release. - - All 7 Series devices - - - Zynq-7000 devices - Zynq-7000 - Defense Grade Zynq-7000Q (XQ) - - - All Virtex-6 devices - - - All Spartan-6 devices - - -................................................................................ - -3. NEW FEATURE HISTORY - - - 3.1 ISE - - - Spread Spectrum support for 7 series MMCME2 - - - ISE 14.2 software support - -................................................................................ - -4. RESOLVED ISSUES - - - 4.1 ISE - - Resolved issue with example design becoming core top in planAhead - - Resolved issue with Virtex6 MMCM instantiation for VHDL project - Please refer to AR 50719 - http://www.xilinx.com/support/answers/50719.htm - -................................................................................ - -5. KNOWN ISSUES & LIMITATIONS - - - 5.1 ISE - - - The most recent information, including known issues, workarounds, and - resolutions for this version is provided in the IP Release Notes Guide - located at - - www.xilinx.com/support/documentation/user_guides/xtp025.pdf - - -................................................................................ - -6. TECHNICAL SUPPORT & FEEDBACK - - -To obtain technical support, create a WebCase at www.xilinx.com/support. -Questions are routed to a team with expertise using this product. - -Xilinx provides technical support for use of this product when used -according to the guidelines described in the core documentation, and -cannot guarantee timing, functionality, or support of this product for -designs that do not follow specified guidelines. - - -................................................................................ - -7. CORE RELEASE HISTORY - - -Date By Version Description -================================================================================ -06/19/2013 Xilinx, Inc. 3.6(Rev3) ISE 14.6 support -10/16/2012 Xilinx, Inc. 3.6(Rev2) ISE 14.3 support -07/25/2012 Xilinx, Inc. 3.6 ISE 14.2 support -04/24/2012 Xilinx, Inc. 3.5 ISE 14.1 support -01/18/2012 Xilinx, Inc. 3.3 ISE 13.4 support -06/22/2011 Xilinx, Inc. 3.2 ISE 13.2 support -03/01/2011 Xilinx, Inc. 3.1 ISE 13.1 support -12/14/2010 Xilinx, Inc. 1.8 ISE 12.4 support -09/21/2010 Xilinx, Inc. 1.7 ISE 12.3 support -07/23/2010 Xilinx, Inc. 1.6 ISE 12.2 support -04/19/2010 Xilinx, Inc. 1.5 ISE 12.1 support -12/02/2009 Xilinx, Inc. 1.4 ISE 11.4 support -09/16/2009 Xilinx, Inc. 1.3 ISE 11.3 support -06/24/2009 Xilinx, Inc. 1.2 ISE 11.2 support -04/24/2009 Xilinx, Inc. 1.1 Initial release; 11.1 support -================================================================================ - -................................................................................ - -8. LEGAL DISCLAIMER - -(c) Copyright 2008 - 2013 Xilinx, Inc. All rights reserved. - -This file contains confidential and proprietary information -of Xilinx, Inc. and is protected under U.S. and -international copyright and other intellectual property -laws. - -DISCLAIMER -This disclaimer is not a license and does not grant any -rights to the materials distributed herewith. Except as -otherwise provided in a valid license issued to you by -Xilinx, and to the maximum extent permitted by applicable -law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -(2) Xilinx shall not be liable (whether in contract or tort, -including negligence, or under any other theory of -liability) for any loss or damage of any kind or nature -related to, arising under or in connection with these -materials, including for any direct, or any indirect, -special, incidental, or consequential loss or damage -(including loss of data, profits, goodwill, or any type of -loss or damage suffered as a result of any action brought -by a third party) even if such damage or loss was -reasonably foreseeable or Xilinx had been advised of the -possibility of the same. - -CRITICAL APPLICATIONS -Xilinx products are not designed or intended to be fail- -safe, or for use in any application requiring fail-safe -performance, such as life-support or safety devices or -systems, Class III medical devices, nuclear facilities, -applications related to the deployment of airbags, or any -other applications that could lead to death, personal -injury, or severe property or environmental damage -(individually and collectively, "Critical -Applications"). Customer assumes the sole risk and -liability of any use of Xilinx products in Critical -Applications, subject only to applicable laws and -regulations governing limitations on product liability. - -THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -PART OF THIS FILE AT ALL TIMES. - diff --git a/common/rtl/ipcore/clkmgr_dcm/doc/clk_wiz_v3_6_readme.txt b/common/rtl/ipcore/clkmgr_dcm/doc/clk_wiz_v3_6_readme.txt deleted file mode 100644 index 91dcdd0..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/doc/clk_wiz_v3_6_readme.txt +++ /dev/null @@ -1,184 +0,0 @@ -CHANGE LOG for LogiCORE Clocking Wizard V3.6 - - Release Date: June 19, 2013 --------------------------------------------------------------------------------- - -Table of Contents - -1. INTRODUCTION -2. DEVICE SUPPORT -3. NEW FEATURE HISTORY -4. RESOLVED ISSUES -5. KNOWN ISSUES & LIMITATIONS -6. TECHNICAL SUPPORT & FEEDBACK -7. CORE RELEASE HISTORY -8. LEGAL DISCLAIMER - --------------------------------------------------------------------------------- - - -1. INTRODUCTION - -For installation instructions for this release, please go to: - - http://www.xilinx.com/ipcenter/coregen/ip_update_install_instructions.htm - -For system requirements: - - http://www.xilinx.com/ipcenter/coregen/ip_update_system_requirements.htm - -This file contains release notes for the Xilinx LogiCORE IP Clocking Wizard v3.6 -solution. For the latest core updates, see the product page at: - - http://www.xilinx.com/products/design_resources/conn_central/solution_kits/wizards/ - -................................................................................ - -2. DEVICE SUPPORT - - - 2.1 ISE - - - The following device families are supported by the core for this release. - - All 7 Series devices - - - Zynq-7000 devices - Zynq-7000 - Defense Grade Zynq-7000Q (XQ) - - - All Virtex-6 devices - - - All Spartan-6 devices - - -................................................................................ - -3. NEW FEATURE HISTORY - - - 3.1 ISE - - - Spread Spectrum support for 7 series MMCME2 - - - ISE 14.2 software support - -................................................................................ - -4. RESOLVED ISSUES - - - 4.1 ISE - - Resolved issue with example design becoming core top in planAhead - - Resolved issue with Virtex6 MMCM instantiation for VHDL project - Please refer to AR 50719 - http://www.xilinx.com/support/answers/50719.htm - -................................................................................ - -5. KNOWN ISSUES & LIMITATIONS - - - 5.1 ISE - - - The most recent information, including known issues, workarounds, and - resolutions for this version is provided in the IP Release Notes Guide - located at - - www.xilinx.com/support/documentation/user_guides/xtp025.pdf - - -................................................................................ - -6. TECHNICAL SUPPORT & FEEDBACK - - -To obtain technical support, create a WebCase at www.xilinx.com/support. -Questions are routed to a team with expertise using this product. - -Xilinx provides technical support for use of this product when used -according to the guidelines described in the core documentation, and -cannot guarantee timing, functionality, or support of this product for -designs that do not follow specified guidelines. - - -................................................................................ - -7. CORE RELEASE HISTORY - - -Date By Version Description -================================================================================ -06/19/2013 Xilinx, Inc. 3.6(Rev3) ISE 14.6 support -10/16/2012 Xilinx, Inc. 3.6(Rev2) ISE 14.3 support -07/25/2012 Xilinx, Inc. 3.6 ISE 14.2 support -04/24/2012 Xilinx, Inc. 3.5 ISE 14.1 support -01/18/2012 Xilinx, Inc. 3.3 ISE 13.4 support -06/22/2011 Xilinx, Inc. 3.2 ISE 13.2 support -03/01/2011 Xilinx, Inc. 3.1 ISE 13.1 support -12/14/2010 Xilinx, Inc. 1.8 ISE 12.4 support -09/21/2010 Xilinx, Inc. 1.7 ISE 12.3 support -07/23/2010 Xilinx, Inc. 1.6 ISE 12.2 support -04/19/2010 Xilinx, Inc. 1.5 ISE 12.1 support -12/02/2009 Xilinx, Inc. 1.4 ISE 11.4 support -09/16/2009 Xilinx, Inc. 1.3 ISE 11.3 support -06/24/2009 Xilinx, Inc. 1.2 ISE 11.2 support -04/24/2009 Xilinx, Inc. 1.1 Initial release; 11.1 support -================================================================================ - -................................................................................ - -8. LEGAL DISCLAIMER - -(c) Copyright 2008 - 2013 Xilinx, Inc. All rights reserved. - -This file contains confidential and proprietary information -of Xilinx, Inc. and is protected under U.S. and -international copyright and other intellectual property -laws. - -DISCLAIMER -This disclaimer is not a license and does not grant any -rights to the materials distributed herewith. Except as -otherwise provided in a valid license issued to you by -Xilinx, and to the maximum extent permitted by applicable -law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -(2) Xilinx shall not be liable (whether in contract or tort, -including negligence, or under any other theory of -liability) for any loss or damage of any kind or nature -related to, arising under or in connection with these -materials, including for any direct, or any indirect, -special, incidental, or consequential loss or damage -(including loss of data, profits, goodwill, or any type of -loss or damage suffered as a result of any action brought -by a third party) even if such damage or loss was -reasonably foreseeable or Xilinx had been advised of the -possibility of the same. - -CRITICAL APPLICATIONS -Xilinx products are not designed or intended to be fail- -safe, or for use in any application requiring fail-safe -performance, such as life-support or safety devices or -systems, Class III medical devices, nuclear facilities, -applications related to the deployment of airbags, or any -other applications that could lead to death, personal -injury, or severe property or environmental damage -(individually and collectively, "Critical -Applications"). Customer assumes the sole risk and -liability of any use of Xilinx products in Critical -Applications, subject only to applicable laws and -regulations governing limitations on product liability. - -THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -PART OF THIS FILE AT ALL TIMES. - diff --git a/common/rtl/ipcore/clkmgr_dcm/doc/clk_wiz_v3_6_vinfo.html b/common/rtl/ipcore/clkmgr_dcm/doc/clk_wiz_v3_6_vinfo.html deleted file mode 100644 index d6deba0..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/doc/clk_wiz_v3_6_vinfo.html +++ /dev/null @@ -1,195 +0,0 @@ -<HTML> -<HEAD> -<TITLE>clk_wiz_v3_6_vinfo</TITLE> -<META HTTP-EQUIV="Content-Type" CONTENT="text/plain;CHARSET=iso-8859-1"> -</HEAD> -<BODY> -<PRE><FONT face="Arial, Helvetica, sans-serif" size="-1"> -CHANGE LOG for LogiCORE Clocking Wizard V3.6 - - Release Date: June 19, 2013 --------------------------------------------------------------------------------- - -Table of Contents - -1. INTRODUCTION -2. DEVICE SUPPORT -3. NEW FEATURE HISTORY -4. RESOLVED ISSUES -5. KNOWN ISSUES & LIMITATIONS -6. TECHNICAL SUPPORT & FEEDBACK -7. CORE RELEASE HISTORY -8. LEGAL DISCLAIMER - --------------------------------------------------------------------------------- - - -1. INTRODUCTION - -For installation instructions for this release, please go to: - - <A HREF="http://www.xilinx.com/ipcenter/coregen/ip_update_install_instructions.htm">www.xilinx.com/ipcenter/coregen/ip_update_install_instructions.htm</A> - -For system requirements: - - <A HREF="http://www.xilinx.com/ipcenter/coregen/ip_update_system_requirements.htm">www.xilinx.com/ipcenter/coregen/ip_update_system_requirements.htm</A> - -This file contains release notes for the Xilinx LogiCORE IP Clocking Wizard v3.6 -solution. For the latest core updates, see the product page at: - - <A HREF="http://www.xilinx.com/products/design_resources/conn_central/solution_kits/wizards/">www.xilinx.com/products/design_resources/conn_central/solution_kits/wizards/</A> - -................................................................................ - -2. DEVICE SUPPORT - - - 2.1 ISE - - - The following device families are supported by the core for this release. - - All 7 Series devices - - - Zynq-7000 devices - Zynq-7000 - Defense Grade Zynq-7000Q (XQ) - - - All Virtex-6 devices - - - All Spartan-6 devices - - -................................................................................ - -3. NEW FEATURE HISTORY - - - 3.1 ISE - - - Spread Spectrum support for 7 series MMCME2 - - - ISE 14.2 software support - -................................................................................ - -4. RESOLVED ISSUES - - - 4.1 ISE - - Resolved issue with example design becoming core top in planAhead - - Resolved issue with Virtex6 MMCM instantiation for VHDL project - Please refer to AR 50719 - <A HREF="http://www.xilinx.com/support/answers/50719.htm">www.xilinx.com/support/answers/50719.htm</A> - -................................................................................ - -5. KNOWN ISSUES & LIMITATIONS - - - 5.1 ISE - - - The most recent information, including known issues, workarounds, and - resolutions for this version is provided in the IP Release Notes Guide - located at - - <A HREF="http://www.xilinx.com/support/documentation/user_guides/xtp025.pdf">www.xilinx.com/support/documentation/user_guides/xtp025.pdf</A> - - -................................................................................ - -6. TECHNICAL SUPPORT & FEEDBACK - - -To obtain technical support, create a WebCase at <A HREF="http://www.xilinx.com/support.">www.xilinx.com/support.</A> -Questions are routed to a team with expertise using this product. - -Xilinx provides technical support for use of this product when used -according to the guidelines described in the core documentation, and -cannot guarantee timing, functionality, or support of this product for -designs that do not follow specified guidelines. - - -................................................................................ - -7. CORE RELEASE HISTORY - - -Date By Version Description -================================================================================ -06/19/2013 Xilinx, Inc. 3.6(Rev3) ISE 14.6 support -10/16/2012 Xilinx, Inc. 3.6(Rev2) ISE 14.3 support -07/25/2012 Xilinx, Inc. 3.6 ISE 14.2 support -04/24/2012 Xilinx, Inc. 3.5 ISE 14.1 support -01/18/2012 Xilinx, Inc. 3.3 ISE 13.4 support -06/22/2011 Xilinx, Inc. 3.2 ISE 13.2 support -03/01/2011 Xilinx, Inc. 3.1 ISE 13.1 support -12/14/2010 Xilinx, Inc. 1.8 ISE 12.4 support -09/21/2010 Xilinx, Inc. 1.7 ISE 12.3 support -07/23/2010 Xilinx, Inc. 1.6 ISE 12.2 support -04/19/2010 Xilinx, Inc. 1.5 ISE 12.1 support -12/02/2009 Xilinx, Inc. 1.4 ISE 11.4 support -09/16/2009 Xilinx, Inc. 1.3 ISE 11.3 support -06/24/2009 Xilinx, Inc. 1.2 ISE 11.2 support -04/24/2009 Xilinx, Inc. 1.1 Initial release; 11.1 support -================================================================================ - -................................................................................ - -8. LEGAL DISCLAIMER - -(c) Copyright 2008 - 2013 Xilinx, Inc. All rights reserved. - -This file contains confidential and proprietary information -of Xilinx, Inc. and is protected under U.S. and -international copyright and other intellectual property -laws. - -DISCLAIMER -This disclaimer is not a license and does not grant any -rights to the materials distributed herewith. Except as -otherwise provided in a valid license issued to you by -Xilinx, and to the maximum extent permitted by applicable -law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND -WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES -AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING -BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON- -INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and -(2) Xilinx shall not be liable (whether in contract or tort, -including negligence, or under any other theory of -liability) for any loss or damage of any kind or nature -related to, arising under or in connection with these -materials, including for any direct, or any indirect, -special, incidental, or consequential loss or damage -(including loss of data, profits, goodwill, or any type of -loss or damage suffered as a result of any action brought -by a third party) even if such damage or loss was -reasonably foreseeable or Xilinx had been advised of the -possibility of the same. - -CRITICAL APPLICATIONS -Xilinx products are not designed or intended to be fail- -safe, or for use in any application requiring fail-safe -performance, such as life-support or safety devices or -systems, Class III medical devices, nuclear facilities, -applications related to the deployment of airbags, or any -other applications that could lead to death, personal -injury, or severe property or environmental damage -(individually and collectively, "Critical -Applications"). Customer assumes the sole risk and -liability of any use of Xilinx products in Critical -Applications, subject only to applicable laws and -regulations governing limitations on product liability. - -THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS -PART OF THIS FILE AT ALL TIMES. - -</FONT> -</PRE> -</BODY> -</HTML> diff --git a/common/rtl/ipcore/clkmgr_dcm/doc/pg065_clk_wiz.pdf b/common/rtl/ipcore/clkmgr_dcm/doc/pg065_clk_wiz.pdf Binary files differdeleted file mode 100644 index a7daa60..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/doc/pg065_clk_wiz.pdf +++ /dev/null diff --git a/common/rtl/ipcore/clkmgr_dcm/example_design/clkmgr_dcm_exdes.ucf b/common/rtl/ipcore/clkmgr_dcm/example_design/clkmgr_dcm_exdes.ucf deleted file mode 100644 index dffb528..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/example_design/clkmgr_dcm_exdes.ucf +++ /dev/null @@ -1,60 +0,0 @@ -# file: clkmgr_dcm_exdes.ucf
-#
-# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
-#
-# This file contains confidential and proprietary information
-# of Xilinx, Inc. and is protected under U.S. and
-# international copyright and other intellectual property
-# laws.
-#
-# DISCLAIMER
-# This disclaimer is not a license and does not grant any
-# rights to the materials distributed herewith. Except as
-# otherwise provided in a valid license issued to you by
-# Xilinx, and to the maximum extent permitted by applicable
-# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-# (2) Xilinx shall not be liable (whether in contract or tort,
-# including negligence, or under any other theory of
-# liability) for any loss or damage of any kind or nature
-# related to, arising under or in connection with these
-# materials, including for any direct, or any indirect,
-# special, incidental, or consequential loss or damage
-# (including loss of data, profits, goodwill, or any type of
-# loss or damage suffered as a result of any action brought
-# by a third party) even if such damage or loss was
-# reasonably foreseeable or Xilinx had been advised of the
-# possibility of the same.
-#
-# CRITICAL APPLICATIONS
-# Xilinx products are not designed or intended to be fail-
-# safe, or for use in any application requiring fail-safe
-# performance, such as life-support or safety devices or
-# systems, Class III medical devices, nuclear facilities,
-# applications related to the deployment of airbags, or any
-# other applications that could lead to death, personal
-# injury, or severe property or environmental damage
-# (individually and collectively, "Critical
-# Applications"). Customer assumes the sole risk and
-# liability of any use of Xilinx products in Critical
-# Applications, subject only to applicable laws and
-# regulations governing limitations on product liability.
-#
-# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-# PART OF THIS FILE AT ALL TIMES.
-#
-
-# Input clock periods. These duplicate the values entered for the
-# input clocks. You can use these to time your system
-#----------------------------------------------------------------
-NET "CLK_IN1" TNM_NET = "CLK_IN1";
-TIMESPEC "TS_CLK_IN1" = PERIOD "CLK_IN1" 20.0 ns HIGH 50% INPUT_JITTER 200.0ps;
-
-
-# FALSE PATH constraints
-PIN "COUNTER_RESET" TIG;
-PIN "RESET" TIG;
-
diff --git a/common/rtl/ipcore/clkmgr_dcm/example_design/clkmgr_dcm_exdes.v b/common/rtl/ipcore/clkmgr_dcm/example_design/clkmgr_dcm_exdes.v deleted file mode 100644 index 10627b3..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/example_design/clkmgr_dcm_exdes.v +++ /dev/null @@ -1,164 +0,0 @@ -// file: clkmgr_dcm_exdes.v
-//
-// (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
-//
-// This file contains confidential and proprietary information
-// of Xilinx, Inc. and is protected under U.S. and
-// international copyright and other intellectual property
-// laws.
-//
-// DISCLAIMER
-// This disclaimer is not a license and does not grant any
-// rights to the materials distributed herewith. Except as
-// otherwise provided in a valid license issued to you by
-// Xilinx, and to the maximum extent permitted by applicable
-// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-// (2) Xilinx shall not be liable (whether in contract or tort,
-// including negligence, or under any other theory of
-// liability) for any loss or damage of any kind or nature
-// related to, arising under or in connection with these
-// materials, including for any direct, or any indirect,
-// special, incidental, or consequential loss or damage
-// (including loss of data, profits, goodwill, or any type of
-// loss or damage suffered as a result of any action brought
-// by a third party) even if such damage or loss was
-// reasonably foreseeable or Xilinx had been advised of the
-// possibility of the same.
-//
-// CRITICAL APPLICATIONS
-// Xilinx products are not designed or intended to be fail-
-// safe, or for use in any application requiring fail-safe
-// performance, such as life-support or safety devices or
-// systems, Class III medical devices, nuclear facilities,
-// applications related to the deployment of airbags, or any
-// other applications that could lead to death, personal
-// injury, or severe property or environmental damage
-// (individually and collectively, "Critical
-// Applications"). Customer assumes the sole risk and
-// liability of any use of Xilinx products in Critical
-// Applications, subject only to applicable laws and
-// regulations governing limitations on product liability.
-//
-// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-// PART OF THIS FILE AT ALL TIMES.
-//
-
-//----------------------------------------------------------------------------
-// Clocking wizard example design
-//----------------------------------------------------------------------------
-// This example design instantiates the created clocking network, where each
-// output clock drives a counter. The high bit of each counter is ported.
-//----------------------------------------------------------------------------
-
-`timescale 1ps/1ps
-
-module clkmgr_dcm_exdes
- #(
- parameter TCQ = 100
- )
- (// Clock in ports
- input CLK_IN1,
- // Reset that only drives logic in example design
- input COUNTER_RESET,
- output [1:1] CLK_OUT,
- // High bits of counters driven by clocks
- output COUNT,
- // Status and control signals
- input RESET,
- output INPUT_CLK_STOPPED,
- output CLK_VALID
- );
-
- // Parameters for the counters
- //-------------------------------
- // Counter width
- localparam C_W = 16;
- // Create reset for the counters
- wire reset_int = RESET || COUNTER_RESET;
-
- reg rst_sync;
- reg rst_sync_int;
- reg rst_sync_int1;
- reg rst_sync_int2;
-
-
-
- // Declare the clocks and counter
- wire clk_int;
- wire clk_n;
- wire clk;
- reg [C_W-1:0] counter;
-
- // Insert BUFGs on all input clocks that don't already have them
- //--------------------------------------------------------------
- BUFG clkin1_buf
- (.O (clk_in1_buf),
- .I (CLK_IN1));
-
- // Instantiation of the clocking network
- //--------------------------------------
- clkmgr_dcm clknetwork
- (// Clock in ports
- .CLK_IN1 (clk_in1_buf),
- // Clock out ports
- .CLK_OUT1 (clk_int),
- // Status and control signals
- .RESET (RESET),
- .INPUT_CLK_STOPPED (INPUT_CLK_STOPPED),
- .CLK_VALID (CLK_VALID));
-
- assign clk_n = ~clk;
-
- ODDR2 clkout_oddr
- (.Q (CLK_OUT[1]),
- .C0 (clk),
- .C1 (clk_n),
- .CE (1'b1),
- .D0 (1'b1),
- .D1 (1'b0),
- .R (1'b0),
- .S (1'b0));
-
- // Connect the output clocks to the design
- //-----------------------------------------
- assign clk = clk_int;
-
-
- // Reset synchronizer
- //-----------------------------------
- always @(posedge reset_int or posedge clk) begin
- if (reset_int) begin
- rst_sync <= 1'b1;
- rst_sync_int <= 1'b1;
- rst_sync_int1 <= 1'b1;
- rst_sync_int2 <= 1'b1;
- end
- else begin
- rst_sync <= 1'b0;
- rst_sync_int <= rst_sync;
- rst_sync_int1 <= rst_sync_int;
- rst_sync_int2 <= rst_sync_int1;
- end
- end
-
-
- // Output clock sampling
- //-----------------------------------
- always @(posedge clk or posedge rst_sync_int2) begin
- if (rst_sync_int2) begin
- counter <= #TCQ { C_W { 1'b 0 } };
- end else begin
- counter <= #TCQ counter + 1'b 1;
- end
- end
-
- // alias the high bit to the output
- assign COUNT = counter[C_W-1];
-
-
-
-endmodule
diff --git a/common/rtl/ipcore/clkmgr_dcm/example_design/clkmgr_dcm_exdes.xdc b/common/rtl/ipcore/clkmgr_dcm/example_design/clkmgr_dcm_exdes.xdc deleted file mode 100644 index 787023d..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/example_design/clkmgr_dcm_exdes.xdc +++ /dev/null @@ -1,69 +0,0 @@ -# file: clkmgr_dcm_exdes.xdc
-#
-# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
-#
-# This file contains confidential and proprietary information
-# of Xilinx, Inc. and is protected under U.S. and
-# international copyright and other intellectual property
-# laws.
-#
-# DISCLAIMER
-# This disclaimer is not a license and does not grant any
-# rights to the materials distributed herewith. Except as
-# otherwise provided in a valid license issued to you by
-# Xilinx, and to the maximum extent permitted by applicable
-# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-# (2) Xilinx shall not be liable (whether in contract or tort,
-# including negligence, or under any other theory of
-# liability) for any loss or damage of any kind or nature
-# related to, arising under or in connection with these
-# materials, including for any direct, or any indirect,
-# special, incidental, or consequential loss or damage
-# (including loss of data, profits, goodwill, or any type of
-# loss or damage suffered as a result of any action brought
-# by a third party) even if such damage or loss was
-# reasonably foreseeable or Xilinx had been advised of the
-# possibility of the same.
-#
-# CRITICAL APPLICATIONS
-# Xilinx products are not designed or intended to be fail-
-# safe, or for use in any application requiring fail-safe
-# performance, such as life-support or safety devices or
-# systems, Class III medical devices, nuclear facilities,
-# applications related to the deployment of airbags, or any
-# other applications that could lead to death, personal
-# injury, or severe property or environmental damage
-# (individually and collectively, "Critical
-# Applications"). Customer assumes the sole risk and
-# liability of any use of Xilinx products in Critical
-# Applications, subject only to applicable laws and
-# regulations governing limitations on product liability.
-#
-# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-# PART OF THIS FILE AT ALL TIMES.
-#
-
-# Input clock periods. These duplicate the values entered for the
-# input clocks. You can use these to time your system
-#----------------------------------------------------------------
-create_clock -name CLK_IN1 -period 20.0 [get_ports CLK_IN1]
-set_propagated_clock CLK_IN1
-set_input_jitter CLK_IN1 0.2
-
-# FALSE PATH constraint added on COUNTER_RESET
-set_false_path -from [get_ports "COUNTER_RESET"]
-set_false_path -from [get_ports "RESET"]
-
-# Derived clock periods. These are commented out because they are
-# automatically propogated by the tools
-# However, if you'd like to use them for module level testing, you
-# can copy them into your module level timing checks
-#-----------------------------------------------------------------
-
-#-----------------------------------------------------------------
-
-#-----------------------------------------------------------------
diff --git a/common/rtl/ipcore/clkmgr_dcm/implement/implement.bat b/common/rtl/ipcore/clkmgr_dcm/implement/implement.bat deleted file mode 100644 index 3d313d5..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/implement/implement.bat +++ /dev/null @@ -1,90 +0,0 @@ -REM file: implement.bat
-REM
-REM (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
-REM
-REM This file contains confidential and proprietary information
-REM of Xilinx, Inc. and is protected under U.S. and
-REM international copyright and other intellectual property
-REM laws.
-REM
-REM DISCLAIMER
-REM This disclaimer is not a license and does not grant any
-REM rights to the materials distributed herewith. Except as
-REM otherwise provided in a valid license issued to you by
-REM Xilinx, and to the maximum extent permitted by applicable
-REM law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-REM WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-REM AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-REM BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-REM INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-REM (2) Xilinx shall not be liable (whether in contract or tort,
-REM including negligence, or under any other theory of
-REM liability) for any loss or damage of any kind or nature
-REM related to, arising under or in connection with these
-REM materials, including for any direct, or any indirect,
-REM special, incidental, or consequential loss or damage
-REM (including loss of data, profits, goodwill, or any type of
-REM loss or damage suffered as a result of any action brought
-REM by a third party) even if such damage or loss was
-REM reasonably foreseeable or Xilinx had been advised of the
-REM possibility of the same.
-REM
-REM CRITICAL APPLICATIONS
-REM Xilinx products are not designed or intended to be fail-
-REM safe, or for use in any application requiring fail-safe
-REM performance, such as life-support or safety devices or
-REM systems, Class III medical devices, nuclear facilities,
-REM applications related to the deployment of airbags, or any
-REM other applications that could lead to death, personal
-REM injury, or severe property or environmental damage
-REM (individually and collectively, "Critical
-REM Applications"). Customer assumes the sole risk and
-REM liability of any use of Xilinx products in Critical
-REM Applications, subject only to applicable laws and
-REM regulations governing limitations on product liability.
-REM
-REM THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-REM PART OF THIS FILE AT ALL TIMES.
-REM
-
-REM -----------------------------------------------------------------------------
-REM Script to synthesize and implement the RTL provided for the clocking wizard
-REM -----------------------------------------------------------------------------
-
-REM Clean up the results directory
-rmdir /S /Q results
-mkdir results
-
-REM Copy unisim_comp.v file to results directory
-copy %XILINX%\verilog\src\iSE\unisim_comp.v .\results\
-
-REM Synthesize the Verilog Wrapper Files
-echo 'Synthesizing Clocking Wizard design with XST'
-xst -ifn xst.scr
-move clkmgr_dcm_exdes.ngc results\
-
-REM Copy the constraints files generated by Coregen
-echo 'Copying files from constraints directory to results directory'
-copy ..\example_design\clkmgr_dcm_exdes.ucf results\
-
-cd results
-
-echo 'Running ngdbuild'
-ngdbuild -uc clkmgr_dcm_exdes.ucf clkmgr_dcm_exdes
-
-echo 'Running map'
-map -timing -pr b clkmgr_dcm_exdes -o mapped.ncd
-
-echo 'Running par'
-par -w mapped.ncd routed mapped.pcf
-
-echo 'Running trce'
-trce -e 10 routed -o routed mapped.pcf
-
-echo 'Running design through bitgen'
-bitgen -w routed
-
-echo 'Running netgen to create gate level model for the clocking wizard example design'
-netgen -ofmt verilog -sim -sdf_anno false -tm clkmgr_dcm_exdes -w routed.ncd routed.v
-cd ..
-
diff --git a/common/rtl/ipcore/clkmgr_dcm/implement/implement.sh b/common/rtl/ipcore/clkmgr_dcm/implement/implement.sh deleted file mode 100644 index 2c64bee..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/implement/implement.sh +++ /dev/null @@ -1,91 +0,0 @@ -#!/bin/sh
-# file: implement.sh
-#
-# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
-#
-# This file contains confidential and proprietary information
-# of Xilinx, Inc. and is protected under U.S. and
-# international copyright and other intellectual property
-# laws.
-#
-# DISCLAIMER
-# This disclaimer is not a license and does not grant any
-# rights to the materials distributed herewith. Except as
-# otherwise provided in a valid license issued to you by
-# Xilinx, and to the maximum extent permitted by applicable
-# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-# (2) Xilinx shall not be liable (whether in contract or tort,
-# including negligence, or under any other theory of
-# liability) for any loss or damage of any kind or nature
-# related to, arising under or in connection with these
-# materials, including for any direct, or any indirect,
-# special, incidental, or consequential loss or damage
-# (including loss of data, profits, goodwill, or any type of
-# loss or damage suffered as a result of any action brought
-# by a third party) even if such damage or loss was
-# reasonably foreseeable or Xilinx had been advised of the
-# possibility of the same.
-#
-# CRITICAL APPLICATIONS
-# Xilinx products are not designed or intended to be fail-
-# safe, or for use in any application requiring fail-safe
-# performance, such as life-support or safety devices or
-# systems, Class III medical devices, nuclear facilities,
-# applications related to the deployment of airbags, or any
-# other applications that could lead to death, personal
-# injury, or severe property or environmental damage
-# (individually and collectively, "Critical
-# Applications"). Customer assumes the sole risk and
-# liability of any use of Xilinx products in Critical
-# Applications, subject only to applicable laws and
-# regulations governing limitations on product liability.
-#
-# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-# PART OF THIS FILE AT ALL TIMES.
-#
-
-#-----------------------------------------------------------------------------
-# Script to synthesize and implement the RTL provided for the clocking wizard
-#-----------------------------------------------------------------------------
-
-# Clean up the results directory
-rm -rf results
-mkdir results
-
-# Copy unisim_comp.v file to results directory
-cp $XILINX/verilog/src/iSE/unisim_comp.v ./results/
-
-# Synthesize the Verilog Wrapper Files
-echo 'Synthesizing Clocking Wizard design with XST'
-xst -ifn xst.scr
-mv clkmgr_dcm_exdes.ngc results/
-
-# Copy the constraints files generated by Coregen
-echo 'Copying files from constraints directory to results directory'
-cp ../example_design/clkmgr_dcm_exdes.ucf results/
-
-cd results
-
-echo 'Running ngdbuild'
-ngdbuild -uc clkmgr_dcm_exdes.ucf clkmgr_dcm_exdes
-
-echo 'Running map'
-map -timing clkmgr_dcm_exdes -o mapped.ncd
-
-echo 'Running par'
-par -w mapped.ncd routed mapped.pcf
-
-echo 'Running trce'
-trce -e 10 routed -o routed mapped.pcf
-
-echo 'Running design through bitgen'
-bitgen -w routed
-
-echo 'Running netgen to create gate level model for the clocking wizard example design'
-netgen -ofmt verilog -sim -sdf_anno false -tm clkmgr_dcm_exdes -w routed.ncd routed.v
-
-cd ..
diff --git a/common/rtl/ipcore/clkmgr_dcm/implement/planAhead_ise.bat b/common/rtl/ipcore/clkmgr_dcm/implement/planAhead_ise.bat deleted file mode 100644 index 9782028..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/implement/planAhead_ise.bat +++ /dev/null @@ -1,58 +0,0 @@ -REM file: planAhead_ise.bat
-REM
-REM (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
-REM
-REM This file contains confidential and proprietary information
-REM of Xilinx, Inc. and is protected under U.S. and
-REM international copyright and other intellectual property
-REM laws.
-REM
-REM DISCLAIMER
-REM This disclaimer is not a license and does not grant any
-REM rights to the materials distributed herewith. Except as
-REM otherwise provided in a valid license issued to you by
-REM Xilinx, and to the maximum extent permitted by applicable
-REM law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-REM WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-REM AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-REM BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-REM INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-REM (2) Xilinx shall not be liable (whether in contract or tort,
-REM including negligence, or under any other theory of
-REM liability) for any loss or damage of any kind or nature
-REM related to, arising under or in connection with these
-REM materials, including for any direct, or any indirect,
-REM special, incidental, or consequential loss or damage
-REM (including loss of data, profits, goodwill, or any type of
-REM loss or damage suffered as a result of any action brought
-REM by a third party) even if such damage or loss was
-REM reasonably foreseeable or Xilinx had been advised of the
-REM possibility of the same.
-REM
-REM CRITICAL APPLICATIONS
-REM Xilinx products are not designed or intended to be fail-
-REM safe, or for use in any application requiring fail-safe
-REM performance, such as life-support or safety devices or
-REM systems, Class III medical devices, nuclear facilities,
-REM applications related to the deployment of airbags, or any
-REM other applications that could lead to death, personal
-REM injury, or severe property or environmental damage
-REM (individually and collectively, "Critical
-REM Applications"). Customer assumes the sole risk and
-REM liability of any use of Xilinx products in Critical
-REM Applications, subject only to applicable laws and
-REM regulations governing limitations on product liability.
-REM
-REM THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-REM PART OF THIS FILE AT ALL TIMES.
-REM
-
-REM-----------------------------------------------------------------------------
-REM Script to synthesize and implement the RTL provided for the clocking wizard
-REM-----------------------------------------------------------------------------
-
-del \f results
-mkdir results
-cd results
-
-planAhead -mode batch -source ..\planAhead_ise.tcl
diff --git a/common/rtl/ipcore/clkmgr_dcm/implement/planAhead_ise.sh b/common/rtl/ipcore/clkmgr_dcm/implement/planAhead_ise.sh deleted file mode 100644 index 7f436b6..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/implement/planAhead_ise.sh +++ /dev/null @@ -1,59 +0,0 @@ -#!/bin/sh
-# file: planAhead_ise.sh
-#
-# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
-#
-# This file contains confidential and proprietary information
-# of Xilinx, Inc. and is protected under U.S. and
-# international copyright and other intellectual property
-# laws.
-#
-# DISCLAIMER
-# This disclaimer is not a license and does not grant any
-# rights to the materials distributed herewith. Except as
-# otherwise provided in a valid license issued to you by
-# Xilinx, and to the maximum extent permitted by applicable
-# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-# (2) Xilinx shall not be liable (whether in contract or tort,
-# including negligence, or under any other theory of
-# liability) for any loss or damage of any kind or nature
-# related to, arising under or in connection with these
-# materials, including for any direct, or any indirect,
-# special, incidental, or consequential loss or damage
-# (including loss of data, profits, goodwill, or any type of
-# loss or damage suffered as a result of any action brought
-# by a third party) even if such damage or loss was
-# reasonably foreseeable or Xilinx had been advised of the
-# possibility of the same.
-#
-# CRITICAL APPLICATIONS
-# Xilinx products are not designed or intended to be fail-
-# safe, or for use in any application requiring fail-safe
-# performance, such as life-support or safety devices or
-# systems, Class III medical devices, nuclear facilities,
-# applications related to the deployment of airbags, or any
-# other applications that could lead to death, personal
-# injury, or severe property or environmental damage
-# (individually and collectively, "Critical
-# Applications"). Customer assumes the sole risk and
-# liability of any use of Xilinx products in Critical
-# Applications, subject only to applicable laws and
-# regulations governing limitations on product liability.
-#
-# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-# PART OF THIS FILE AT ALL TIMES.
-#
-
-#-----------------------------------------------------------------------------
-# Script to synthesize and implement the RTL provided for the clocking wizard
-#-----------------------------------------------------------------------------
-
-rm -rf results
-mkdir results
-cd results
-
-planAhead -mode batch -source ../planAhead_ise.tcl
diff --git a/common/rtl/ipcore/clkmgr_dcm/implement/planAhead_ise.tcl b/common/rtl/ipcore/clkmgr_dcm/implement/planAhead_ise.tcl deleted file mode 100644 index ab77638..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/implement/planAhead_ise.tcl +++ /dev/null @@ -1,78 +0,0 @@ -# file: planAhead_ise.tcl
-#
-# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
-#
-# This file contains confidential and proprietary information
-# of Xilinx, Inc. and is protected under U.S. and
-# international copyright and other intellectual property
-# laws.
-#
-# DISCLAIMER
-# This disclaimer is not a license and does not grant any
-# rights to the materials distributed herewith. Except as
-# otherwise provided in a valid license issued to you by
-# Xilinx, and to the maximum extent permitted by applicable
-# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-# (2) Xilinx shall not be liable (whether in contract or tort,
-# including negligence, or under any other theory of
-# liability) for any loss or damage of any kind or nature
-# related to, arising under or in connection with these
-# materials, including for any direct, or any indirect,
-# special, incidental, or consequential loss or damage
-# (including loss of data, profits, goodwill, or any type of
-# loss or damage suffered as a result of any action brought
-# by a third party) even if such damage or loss was
-# reasonably foreseeable or Xilinx had been advised of the
-# possibility of the same.
-#
-# CRITICAL APPLICATIONS
-# Xilinx products are not designed or intended to be fail-
-# safe, or for use in any application requiring fail-safe
-# performance, such as life-support or safety devices or
-# systems, Class III medical devices, nuclear facilities,
-# applications related to the deployment of airbags, or any
-# other applications that could lead to death, personal
-# injury, or severe property or environmental damage
-# (individually and collectively, "Critical
-# Applications"). Customer assumes the sole risk and
-# liability of any use of Xilinx products in Critical
-# Applications, subject only to applicable laws and
-# regulations governing limitations on product liability.
-#
-# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-# PART OF THIS FILE AT ALL TIMES.
-#
-
-set projDir [file dirname [info script]]
-set projName clkmgr_dcm
-set topName clkmgr_dcm_exdes
-set device xc6slx45csg324-3
-
-create_project $projName $projDir/results/$projName -part $device
-
-set_property design_mode RTL [get_filesets sources_1]
-
-## Source files
-#set verilogSources [glob $srcDir/*.v]
-import_files -fileset [get_filesets sources_1] -force -norecurse ../../example_design/clkmgr_dcm_exdes.v
-import_files -fileset [get_filesets sources_1] -force -norecurse ../../../clkmgr_dcm.v
-
-
-#UCF file
-import_files -fileset [get_filesets constrs_1] -force -norecurse ../../example_design/clkmgr_dcm_exdes.ucf
-
-set_property top $topName [get_property srcset [current_run]]
-
-launch_runs -runs synth_1
-wait_on_run synth_1
-
-set_property add_step Bitgen [get_runs impl_1]
-launch_runs -runs impl_1
-wait_on_run impl_1
-
-
-
diff --git a/common/rtl/ipcore/clkmgr_dcm/implement/planAhead_rdn.bat b/common/rtl/ipcore/clkmgr_dcm/implement/planAhead_rdn.bat deleted file mode 100644 index 3e1e03b..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/implement/planAhead_rdn.bat +++ /dev/null @@ -1,58 +0,0 @@ -REM file: planAhead_rdn.sh
-REM
-REM (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
-REM
-REM This file contains confidential and proprietary information
-REM of Xilinx, Inc. and is protected under U.S. and
-REM international copyright and other intellectual property
-REM laws.
-REM
-REM DISCLAIMER
-REM This disclaimer is not a license and does not grant any
-REM rights to the materials distributed herewith. Except as
-REM otherwise provided in a valid license issued to you by
-REM Xilinx, and to the maximum extent permitted by applicable
-REM law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-REM WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-REM AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-REM BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-REM INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-REM (2) Xilinx shall not be liable (whether in contract or tort,
-REM including negligence, or under any other theory of
-REM liability) for any loss or damage of any kind or nature
-REM related to, arising under or in connection with these
-REM materials, including for any direct, or any indirect,
-REM special, incidental, or consequential loss or damage
-REM (including loss of data, profits, goodwill, or any type of
-REM loss or damage suffered as a result of any action brought
-REM by a third party) even if such damage or loss was
-REM reasonably foreseeable or Xilinx had been advised of the
-REM possibility of the same.
-REM
-REM CRITICAL APPLICATIONS
-REM Xilinx products are not designed or intended to be fail-
-REM safe, or for use in any application requiring fail-safe
-REM performance, such as life-support or safety devices or
-REM systems, Class III medical devices, nuclear facilities,
-REM applications related to the deployment of airbags, or any
-REM other applications that could lead to death, personal
-REM injury, or severe property or environmental damage
-REM (individually and collectively, "Critical
-REM Applications"). Customer assumes the sole risk and
-REM liability of any use of Xilinx products in Critical
-REM Applications, subject only to applicable laws and
-REM regulations governing limitations on product liability.
-REM
-REM THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-REM PART OF THIS FILE AT ALL TIMES.
-REM
-
-REM-----------------------------------------------------------------------------
-REM Script to synthesize and implement the RTL provided for the XADC wizard
-REM-----------------------------------------------------------------------------
-
-del \f results
-mkdir results
-cd results
-
-planAhead -mode batch -source ..\planAhead_rdn.tcl
diff --git a/common/rtl/ipcore/clkmgr_dcm/implement/planAhead_rdn.sh b/common/rtl/ipcore/clkmgr_dcm/implement/planAhead_rdn.sh deleted file mode 100644 index a5adee8..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/implement/planAhead_rdn.sh +++ /dev/null @@ -1,57 +0,0 @@ -#!/bin/sh
-# file: planAhead_rdn.sh
-#
-# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
-#
-# This file contains confidential and proprietary information
-# of Xilinx, Inc. and is protected under U.S. and
-# international copyright and other intellectual property
-# laws.
-#
-# DISCLAIMER
-# This disclaimer is not a license and does not grant any
-# rights to the materials distributed herewith. Except as
-# otherwise provided in a valid license issued to you by
-# Xilinx, and to the maximum extent permitted by applicable
-# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-# (2) Xilinx shall not be liable (whether in contract or tort,
-# including negligence, or under any other theory of
-# liability) for any loss or damage of any kind or nature
-# related to, arising under or in connection with these
-# materials, including for any direct, or any indirect,
-# special, incidental, or consequential loss or damage
-# (including loss of data, profits, goodwill, or any type of
-# loss or damage suffered as a result of any action brought
-# by a third party) even if such damage or loss was
-# reasonably foreseeable or Xilinx had been advised of the
-# possibility of the same.
-#
-# CRITICAL APPLICATIONS
-# Xilinx products are not designed or intended to be fail-
-# safe, or for use in any application requiring fail-safe
-# performance, such as life-support or safety devices or
-# systems, Class III medical devices, nuclear facilities,
-# applications related to the deployment of airbags, or any
-# other applications that could lead to death, personal
-# injury, or severe property or environmental damage
-# (individually and collectively, "Critical
-# Applications"). Customer assumes the sole risk and
-# liability of any use of Xilinx products in Critical
-# Applications, subject only to applicable laws and
-# regulations governing limitations on product liability.
-#
-# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-# PART OF THIS FILE AT ALL TIMES.
-#
-
-#-----------------------------------------------------------------------------
-# Script to synthesize and implement the RTL provided for the XADC wizard
-#-----------------------------------------------------------------------------
-rm -rf results
-mkdir results
-cd results
-planAhead -mode batch -source ../planAhead_rdn.tcl
diff --git a/common/rtl/ipcore/clkmgr_dcm/implement/planAhead_rdn.tcl b/common/rtl/ipcore/clkmgr_dcm/implement/planAhead_rdn.tcl deleted file mode 100644 index e8c0fdf..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/implement/planAhead_rdn.tcl +++ /dev/null @@ -1,69 +0,0 @@ -# file : planAhead_rdn.tcl
-#
-# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
-#
-# This file contains confidential and proprietary information
-# of Xilinx, Inc. and is protected under U.S. and
-# international copyright and other intellectual property
-# laws.
-#
-# DISCLAIMER
-# This disclaimer is not a license and does not grant any
-# rights to the materials distributed herewith. Except as
-# otherwise provided in a valid license issued to you by
-# Xilinx, and to the maximum extent permitted by applicable
-# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-# (2) Xilinx shall not be liable (whether in contract or tort,
-# including negligence, or under any other theory of
-# liability) for any loss or damage of any kind or nature
-# related to, arising under or in connection with these
-# materials, including for any direct, or any indirect,
-# special, incidental, or consequential loss or damage
-# (including loss of data, profits, goodwill, or any type of
-# loss or damage suffered as a result of any action brought
-# by a third party) even if such damage or loss was
-# reasonably foreseeable or Xilinx had been advised of the
-# possibility of the same.
-#
-# CRITICAL APPLICATIONS
-# Xilinx products are not designed or intended to be fail-
-# safe, or for use in any application requiring fail-safe
-# performance, such as life-support or safety devices or
-# systems, Class III medical devices, nuclear facilities,
-# applications related to the deployment of airbags, or any
-# other applications that could lead to death, personal
-# injury, or severe property or environmental damage
-# (individually and collectively, "Critical
-# Applications"). Customer assumes the sole risk and
-# liability of any use of Xilinx products in Critical
-# Applications, subject only to applicable laws and
-# regulations governing limitations on product liability.
-#
-# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-# PART OF THIS FILE AT ALL TIMES.
-#
-
-set device xc6slx45csg324-3
-set projName clkmgr_dcm
-set design clkmgr_dcm
-set projDir [file dirname [info script]]
-create_project $projName $projDir/results/$projName -part $device -force
-set_property design_mode RTL [current_fileset -srcset]
-set top_module clkmgr_dcm_exdes
-set_property top clkmgr_dcm_exdes [get_property srcset [current_run]]
-add_files -norecurse {../../../clkmgr_dcm.v}
-add_files -norecurse {../../example_design/clkmgr_dcm_exdes.v}
-import_files -fileset [get_filesets constrs_1 ] -force -norecurse {../../example_design/clkmgr_dcm_exdes.xdc}
-synth_design
-opt_design
-place_design
-route_design
-write_sdf -rename_top_module clkmgr_dcm_exdes -file routed.sdf
-write_verilog -nolib -mode timesim -sdf_anno false -rename_top_module clkmgr_dcm_exdes -file routed.v
-report_timing -nworst 30 -path_type full -file routed.twr
-report_drc -file report.drc
-write_bitstream -bitgen_options {-g UnconstrainedPins:Allow} -file routed.bit
diff --git a/common/rtl/ipcore/clkmgr_dcm/implement/xst.prj b/common/rtl/ipcore/clkmgr_dcm/implement/xst.prj deleted file mode 100644 index cd0e0e6..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/implement/xst.prj +++ /dev/null @@ -1,2 +0,0 @@ -verilog work ../../clkmgr_dcm.v
-verilog work ../example_design/clkmgr_dcm_exdes.v
diff --git a/common/rtl/ipcore/clkmgr_dcm/implement/xst.scr b/common/rtl/ipcore/clkmgr_dcm/implement/xst.scr deleted file mode 100644 index 20d09f4..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/implement/xst.scr +++ /dev/null @@ -1,9 +0,0 @@ -run
--ifmt MIXED
--top clkmgr_dcm_exdes
--p xc6slx45-csg324-3
--ifn xst.prj
--ofn clkmgr_dcm_exdes
--keep_hierarchy soft
--equivalent_register_removal no
--max_fanout 65535
diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/clkmgr_dcm_tb.v b/common/rtl/ipcore/clkmgr_dcm/simulation/clkmgr_dcm_tb.v deleted file mode 100644 index ee24750..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/clkmgr_dcm_tb.v +++ /dev/null @@ -1,145 +0,0 @@ -// file: clkmgr_dcm_tb.v
-//
-// (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
-//
-// This file contains confidential and proprietary information
-// of Xilinx, Inc. and is protected under U.S. and
-// international copyright and other intellectual property
-// laws.
-//
-// DISCLAIMER
-// This disclaimer is not a license and does not grant any
-// rights to the materials distributed herewith. Except as
-// otherwise provided in a valid license issued to you by
-// Xilinx, and to the maximum extent permitted by applicable
-// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-// (2) Xilinx shall not be liable (whether in contract or tort,
-// including negligence, or under any other theory of
-// liability) for any loss or damage of any kind or nature
-// related to, arising under or in connection with these
-// materials, including for any direct, or any indirect,
-// special, incidental, or consequential loss or damage
-// (including loss of data, profits, goodwill, or any type of
-// loss or damage suffered as a result of any action brought
-// by a third party) even if such damage or loss was
-// reasonably foreseeable or Xilinx had been advised of the
-// possibility of the same.
-//
-// CRITICAL APPLICATIONS
-// Xilinx products are not designed or intended to be fail-
-// safe, or for use in any application requiring fail-safe
-// performance, such as life-support or safety devices or
-// systems, Class III medical devices, nuclear facilities,
-// applications related to the deployment of airbags, or any
-// other applications that could lead to death, personal
-// injury, or severe property or environmental damage
-// (individually and collectively, "Critical
-// Applications"). Customer assumes the sole risk and
-// liability of any use of Xilinx products in Critical
-// Applications, subject only to applicable laws and
-// regulations governing limitations on product liability.
-//
-// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-// PART OF THIS FILE AT ALL TIMES.
-//
-
-//----------------------------------------------------------------------------
-// Clocking wizard demonstration testbench
-//----------------------------------------------------------------------------
-// This demonstration testbench instantiates the example design for the
-// clocking wizard. Input clocks are toggled, which cause the clocking
-// network to lock and the counters to increment.
-//----------------------------------------------------------------------------
-
-`timescale 1ps/1ps
-
-`define wait_lock @(posedge CLK_VALID)
-
-module clkmgr_dcm_tb ();
-
- // Clock to Q delay of 100ps
- localparam TCQ = 100;
-
-
- // timescale is 1ps/1ps
- localparam ONE_NS = 1000;
- localparam PHASE_ERR_MARGIN = 100; // 100ps
- // how many cycles to run
- localparam COUNT_PHASE = 1024;
- // we'll be using the period in many locations
- localparam time PER1 = 20.0*ONE_NS;
- localparam time PER1_1 = PER1/2;
- localparam time PER1_2 = PER1 - PER1/2;
-
- // Declare the input clock signals
- reg CLK_IN1 = 1;
-
- // The high bit of the sampling counter
- wire COUNT;
- // Status and control signals
- reg RESET = 0;
- wire INPUT_CLK_STOPPED;
- wire CLK_VALID;
- reg COUNTER_RESET = 0;
-wire [1:1] CLK_OUT;
-//Freq Check using the M & D values setting and actual Frequency generated
-
-
- // Input clock generation
- //------------------------------------
- always begin
- CLK_IN1 = #PER1_1 ~CLK_IN1;
- CLK_IN1 = #PER1_2 ~CLK_IN1;
- end
-
- // Test sequence
- reg [15*8-1:0] test_phase = "";
- initial begin
- // Set up any display statements using time to be readable
- $timeformat(-12, 2, "ps", 10);
- COUNTER_RESET = 0;
- test_phase = "reset";
- RESET = 1;
- #(PER1*6);
- RESET = 0;
- test_phase = "wait lock";
- `wait_lock;
- #(PER1*6);
- COUNTER_RESET = 1;
- #(PER1*20)
- COUNTER_RESET = 0;
-
- test_phase = "counting";
- #(PER1*COUNT_PHASE);
-
- $display("SIMULATION PASSED");
- $display("SYSTEM_CLOCK_COUNTER : %0d\n",$time/PER1);
- $finish;
- end
-
- // Instantiation of the example design containing the clock
- // network and sampling counters
- //---------------------------------------------------------
- clkmgr_dcm_exdes
- #(
- .TCQ (TCQ)
- ) dut
- (// Clock in ports
- .CLK_IN1 (CLK_IN1),
- // Reset for logic in example design
- .COUNTER_RESET (COUNTER_RESET),
- .CLK_OUT (CLK_OUT),
- // High bits of the counters
- .COUNT (COUNT),
- // Status and control signals
- .RESET (RESET),
- .INPUT_CLK_STOPPED (INPUT_CLK_STOPPED),
- .CLK_VALID (CLK_VALID));
-
-// Freq Check
-
-endmodule
diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simcmds.tcl b/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simcmds.tcl deleted file mode 100644 index e19ead8..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simcmds.tcl +++ /dev/null @@ -1,8 +0,0 @@ -# file: simcmds.tcl
-
-# create the simulation script
-vcd dumpfile isim.vcd
-vcd dumpvars -m /clkmgr_dcm_tb -l 0
-wave add /
-run 50000ns
-quit
diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_isim.bat b/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_isim.bat deleted file mode 100644 index 80904cb..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_isim.bat +++ /dev/null @@ -1,59 +0,0 @@ -REM file: simulate_isim.bat
-REM
-REM (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
-REM
-REM This file contains confidential and proprietary information
-REM of Xilinx, Inc. and is protected under U.S. and
-REM international copyright and other intellectual property
-REM laws.
-REM
-REM DISCLAIMER
-REM This disclaimer is not a license and does not grant any
-REM rights to the materials distributed herewith. Except as
-REM otherwise provided in a valid license issued to you by
-REM Xilinx, and to the maximum extent permitted by applicable
-REM law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-REM WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-REM AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-REM BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-REM INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-REM (2) Xilinx shall not be liable (whether in contract or tort,
-REM including negligence, or under any other theory of
-REM liability) for any loss or damage of any kind or nature
-REM related to, arising under or in connection with these
-REM materials, including for any direct, or any indirect,
-REM special, incidental, or consequential loss or damage
-REM (including loss of data, profits, goodwill, or any type of
-REM loss or damage suffered as a result of any action brought
-REM by a third party) even if such damage or loss was
-REM reasonably foreseeable or Xilinx had been advised of the
-REM possibility of the same.
-REM
-REM CRITICAL APPLICATIONS
-REM Xilinx products are not designed or intended to be fail-
-REM safe, or for use in any application requiring fail-safe
-REM performance, such as life-support or safety devices or
-REM systems, Class III medical devices, nuclear facilities,
-REM applications related to the deployment of airbags, or any
-REM other applications that could lead to death, personal
-REM injury, or severe property or environmental damage
-REM (individually and collectively, "Critical
-REM Applications"). Customer assumes the sole risk and
-REM liability of any use of Xilinx products in Critical
-REM Applications, subject only to applicable laws and
-REM regulations governing limitations on product liability.
-REM
-REM THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-REM PART OF THIS FILE AT ALL TIMES.
-REM
-
-vlogcomp -work work %XILINX%\verilog\src\glbl.v
-vlogcomp -work work ..\..\..\clkmgr_dcm.v
-vlogcomp -work work ..\..\example_design\clkmgr_dcm_exdes.v
-vlogcomp -work work ..\clkmgr_dcm_tb.v
-
-REM compile the project
-fuse work.clkmgr_dcm_tb work.glbl -L unisims_ver -o clkmgr_dcm_isim.exe
-
-REM run the simulation script
-.\clkmgr_dcm_isim.exe -gui -tclbatch simcmds.tcl
diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_isim.sh b/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_isim.sh deleted file mode 100644 index 9fb5029..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_isim.sh +++ /dev/null @@ -1,61 +0,0 @@ -# file: simulate_isim.sh
-#
-# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
-#
-# This file contains confidential and proprietary information
-# of Xilinx, Inc. and is protected under U.S. and
-# international copyright and other intellectual property
-# laws.
-#
-# DISCLAIMER
-# This disclaimer is not a license and does not grant any
-# rights to the materials distributed herewith. Except as
-# otherwise provided in a valid license issued to you by
-# Xilinx, and to the maximum extent permitted by applicable
-# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-# (2) Xilinx shall not be liable (whether in contract or tort,
-# including negligence, or under any other theory of
-# liability) for any loss or damage of any kind or nature
-# related to, arising under or in connection with these
-# materials, including for any direct, or any indirect,
-# special, incidental, or consequential loss or damage
-# (including loss of data, profits, goodwill, or any type of
-# loss or damage suffered as a result of any action brought
-# by a third party) even if such damage or loss was
-# reasonably foreseeable or Xilinx had been advised of the
-# possibility of the same.
-#
-# CRITICAL APPLICATIONS
-# Xilinx products are not designed or intended to be fail-
-# safe, or for use in any application requiring fail-safe
-# performance, such as life-support or safety devices or
-# systems, Class III medical devices, nuclear facilities,
-# applications related to the deployment of airbags, or any
-# other applications that could lead to death, personal
-# injury, or severe property or environmental damage
-# (individually and collectively, "Critical
-# Applications"). Customer assumes the sole risk and
-# liability of any use of Xilinx products in Critical
-# Applications, subject only to applicable laws and
-# regulations governing limitations on product liability.
-#
-# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-# PART OF THIS FILE AT ALL TIMES.
-#
-
-# nt
-# create the project
-vlogcomp -work work ${XILINX}/verilog/src/glbl.v
-vlogcomp -work work ../../../clkmgr_dcm.v
-vlogcomp -work work ../../example_design/clkmgr_dcm_exdes.v
-vlogcomp -work work ../clkmgr_dcm_tb.v
-
-# compile the project
-fuse work.clkmgr_dcm_tb work.glbl -L unisims_ver -o clkmgr_dcm_isim.exe
-
-# run the simulation script
-./clkmgr_dcm_isim.exe -gui -tclbatch simcmds.tcl
diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_mti.bat b/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_mti.bat deleted file mode 100644 index 7497cd9..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_mti.bat +++ /dev/null @@ -1,61 +0,0 @@ -REM file: simulate_mti.bat
-REM
-REM (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
-REM
-REM This file contains confidential and proprietary information
-REM of Xilinx, Inc. and is protected under U.S. and
-REM international copyright and other intellectual property
-REM laws.
-REM
-REM DISCLAIMER
-REM This disclaimer is not a license and does not grant any
-REM rights to the materials distributed herewith. Except as
-REM otherwise provided in a valid license issued to you by
-REM Xilinx, and to the maximum extent permitted by applicable
-REM law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-REM WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-REM AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-REM BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-REM INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-REM (2) Xilinx shall not be liable (whether in contract or tort,
-REM including negligence, or under any other theory of
-REM liability) for any loss or damage of any kind or nature
-REM related to, arising under or in connection with these
-REM materials, including for any direct, or any indirect,
-REM special, incidental, or consequential loss or damage
-REM (including loss of data, profits, goodwill, or any type of
-REM loss or damage suffered as a result of any action brought
-REM by a third party) even if such damage or loss was
-REM reasonably foreseeable or Xilinx had been advised of the
-REM possibility of the same.
-REM
-REM CRITICAL APPLICATIONS
-REM Xilinx products are not designed or intended to be fail-
-REM safe, or for use in any application requiring fail-safe
-REM performance, such as life-support or safety devices or
-REM systems, Class III medical devices, nuclear facilities,
-REM applications related to the deployment of airbags, or any
-REM other applications that could lead to death, personal
-REM injury, or severe property or environmental damage
-REM (individually and collectively, "Critical
-REM Applications"). Customer assumes the sole risk and
-REM liability of any use of Xilinx products in Critical
-REM Applications, subject only to applicable laws and
-REM regulations governing limitations on product liability.
-REM
-REM THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-REM PART OF THIS FILE AT ALL TIMES.
-REM
-
-REM set up the working directory
-vlib work
-
-REM compile all of the files
-vlog -work work %XILINX%\verilog\src\glbl.v
-vlog -work work ..\..\..\clkmgr_dcm.v
-vlog -work work ..\..\example_design\clkmgr_dcm_exdes.v
-vlog -work work ..\clkmgr_dcm_tb.v
-
-REM run the simulation
-vsim -c -t ps -voptargs="+acc" -L secureip -L unisims_ver work.clkmgr_dcm_tb work.glbl
-
diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_mti.do b/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_mti.do deleted file mode 100644 index b0e526f..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_mti.do +++ /dev/null @@ -1,65 +0,0 @@ -# file: simulate_mti.do
-#
-# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
-#
-# This file contains confidential and proprietary information
-# of Xilinx, Inc. and is protected under U.S. and
-# international copyright and other intellectual property
-# laws.
-#
-# DISCLAIMER
-# This disclaimer is not a license and does not grant any
-# rights to the materials distributed herewith. Except as
-# otherwise provided in a valid license issued to you by
-# Xilinx, and to the maximum extent permitted by applicable
-# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-# (2) Xilinx shall not be liable (whether in contract or tort,
-# including negligence, or under any other theory of
-# liability) for any loss or damage of any kind or nature
-# related to, arising under or in connection with these
-# materials, including for any direct, or any indirect,
-# special, incidental, or consequential loss or damage
-# (including loss of data, profits, goodwill, or any type of
-# loss or damage suffered as a result of any action brought
-# by a third party) even if such damage or loss was
-# reasonably foreseeable or Xilinx had been advised of the
-# possibility of the same.
-#
-# CRITICAL APPLICATIONS
-# Xilinx products are not designed or intended to be fail-
-# safe, or for use in any application requiring fail-safe
-# performance, such as life-support or safety devices or
-# systems, Class III medical devices, nuclear facilities,
-# applications related to the deployment of airbags, or any
-# other applications that could lead to death, personal
-# injury, or severe property or environmental damage
-# (individually and collectively, "Critical
-# Applications"). Customer assumes the sole risk and
-# liability of any use of Xilinx products in Critical
-# Applications, subject only to applicable laws and
-# regulations governing limitations on product liability.
-#
-# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-# PART OF THIS FILE AT ALL TIMES.
-#
-
-# set up the working directory
-set work work
-vlib work
-
-# compile all of the files
-vlog -work work $env(XILINX)/verilog/src/glbl.v
-vlog -work work ../../../clkmgr_dcm.v
-vlog -work work ../../example_design/clkmgr_dcm_exdes.v
-vlog -work work ../clkmgr_dcm_tb.v
-
-# run the simulation
-vsim -t ps -voptargs="+acc" -L unisims_ver work.clkmgr_dcm_tb work.glbl
-do wave.do
-log clkmgr_dcm_tb/dut/counter
-log -r /*
-run 50000ns
diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_mti.sh b/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_mti.sh deleted file mode 100644 index 66099e0..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_mti.sh +++ /dev/null @@ -1,61 +0,0 @@ -#/bin/sh
-# file: simulate_mti.sh
-#
-# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
-#
-# This file contains confidential and proprietary information
-# of Xilinx, Inc. and is protected under U.S. and
-# international copyright and other intellectual property
-# laws.
-#
-# DISCLAIMER
-# This disclaimer is not a license and does not grant any
-# rights to the materials distributed herewith. Except as
-# otherwise provided in a valid license issued to you by
-# Xilinx, and to the maximum extent permitted by applicable
-# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-# (2) Xilinx shall not be liable (whether in contract or tort,
-# including negligence, or under any other theory of
-# liability) for any loss or damage of any kind or nature
-# related to, arising under or in connection with these
-# materials, including for any direct, or any indirect,
-# special, incidental, or consequential loss or damage
-# (including loss of data, profits, goodwill, or any type of
-# loss or damage suffered as a result of any action brought
-# by a third party) even if such damage or loss was
-# reasonably foreseeable or Xilinx had been advised of the
-# possibility of the same.
-#
-# CRITICAL APPLICATIONS
-# Xilinx products are not designed or intended to be fail-
-# safe, or for use in any application requiring fail-safe
-# performance, such as life-support or safety devices or
-# systems, Class III medical devices, nuclear facilities,
-# applications related to the deployment of airbags, or any
-# other applications that could lead to death, personal
-# injury, or severe property or environmental damage
-# (individually and collectively, "Critical
-# Applications"). Customer assumes the sole risk and
-# liability of any use of Xilinx products in Critical
-# Applications, subject only to applicable laws and
-# regulations governing limitations on product liability.
-#
-# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-# PART OF THIS FILE AT ALL TIMES.
-#
-# set up the working directory
-set work work
-vlib work
-
-# compile all of the files
-vlog -work work $XILINX/verilog/src/glbl.v
-vlog -work work ../../../clkmgr_dcm.v
-vlog -work work ../../example_design/clkmgr_dcm_exdes.v
-vlog -work work ../clkmgr_dcm_tb.v
-
-# run the simulation
-vsim -c -t ps -voptargs="+acc" -L secureip -L unisims_ver work.clkmgr_dcm_tb work.glbl
diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_ncsim.sh b/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_ncsim.sh deleted file mode 100644 index 01b0412..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_ncsim.sh +++ /dev/null @@ -1,62 +0,0 @@ -#/bin/sh
-# file: simulate_ncsim.sh
-#
-# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
-#
-# This file contains confidential and proprietary information
-# of Xilinx, Inc. and is protected under U.S. and
-# international copyright and other intellectual property
-# laws.
-#
-# DISCLAIMER
-# This disclaimer is not a license and does not grant any
-# rights to the materials distributed herewith. Except as
-# otherwise provided in a valid license issued to you by
-# Xilinx, and to the maximum extent permitted by applicable
-# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-# (2) Xilinx shall not be liable (whether in contract or tort,
-# including negligence, or under any other theory of
-# liability) for any loss or damage of any kind or nature
-# related to, arising under or in connection with these
-# materials, including for any direct, or any indirect,
-# special, incidental, or consequential loss or damage
-# (including loss of data, profits, goodwill, or any type of
-# loss or damage suffered as a result of any action brought
-# by a third party) even if such damage or loss was
-# reasonably foreseeable or Xilinx had been advised of the
-# possibility of the same.
-#
-# CRITICAL APPLICATIONS
-# Xilinx products are not designed or intended to be fail-
-# safe, or for use in any application requiring fail-safe
-# performance, such as life-support or safety devices or
-# systems, Class III medical devices, nuclear facilities,
-# applications related to the deployment of airbags, or any
-# other applications that could lead to death, personal
-# injury, or severe property or environmental damage
-# (individually and collectively, "Critical
-# Applications"). Customer assumes the sole risk and
-# liability of any use of Xilinx products in Critical
-# Applications, subject only to applicable laws and
-# regulations governing limitations on product liability.
-#
-# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-# PART OF THIS FILE AT ALL TIMES.
-#
-
-# set up the working directory
-mkdir work
-
-# compile all of the files
-ncvlog -work work ${XILINX}/verilog/src/glbl.v
-ncvlog -work work ../../../clkmgr_dcm.v
-ncvlog -work work ../../example_design/clkmgr_dcm_exdes.v
-ncvlog -work work ../clkmgr_dcm_tb.v
-
-# elaborate and run the simulation
-ncelab -work work -access +wc work.clkmgr_dcm_tb work.glbl
-ncsim -input "@database -open -shm nc; probe -create -database nc -all -depth all; probe dut.counter; run 50000ns; exit" work.clkmgr_dcm_tb
diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_vcs.sh b/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_vcs.sh deleted file mode 100644 index 39668df..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/simulate_vcs.sh +++ /dev/null @@ -1,72 +0,0 @@ -#!/bin/sh
-# file: simulate_vcs.sh
-#
-# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
-#
-# This file contains confidential and proprietary information
-# of Xilinx, Inc. and is protected under U.S. and
-# international copyright and other intellectual property
-# laws.
-#
-# DISCLAIMER
-# This disclaimer is not a license and does not grant any
-# rights to the materials distributed herewith. Except as
-# otherwise provided in a valid license issued to you by
-# Xilinx, and to the maximum extent permitted by applicable
-# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-# (2) Xilinx shall not be liable (whether in contract or tort,
-# including negligence, or under any other theory of
-# liability) for any loss or damage of any kind or nature
-# related to, arising under or in connection with these
-# materials, including for any direct, or any indirect,
-# special, incidental, or consequential loss or damage
-# (including loss of data, profits, goodwill, or any type of
-# loss or damage suffered as a result of any action brought
-# by a third party) even if such damage or loss was
-# reasonably foreseeable or Xilinx had been advised of the
-# possibility of the same.
-#
-# CRITICAL APPLICATIONS
-# Xilinx products are not designed or intended to be fail-
-# safe, or for use in any application requiring fail-safe
-# performance, such as life-support or safety devices or
-# systems, Class III medical devices, nuclear facilities,
-# applications related to the deployment of airbags, or any
-# other applications that could lead to death, personal
-# injury, or severe property or environmental damage
-# (individually and collectively, "Critical
-# Applications"). Customer assumes the sole risk and
-# liability of any use of Xilinx products in Critical
-# Applications, subject only to applicable laws and
-# regulations governing limitations on product liability.
-#
-# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-# PART OF THIS FILE AT ALL TIMES.
-#
-
-# remove old files
-rm -rf simv* csrc DVEfiles AN.DB
-
-# compile all of the files
-# Note that -sverilog is not strictly required- You can
-# remove the -sverilog if you change the type of the
-# localparam for the periods in the testbench file to
-# [63:0] from time
-vlogan -sverilog \
- ${XILINX}/verilog/src/glbl.v \
- ../../../clkmgr_dcm.v \
- ../../example_design/clkmgr_dcm_exdes.v \
- ../clkmgr_dcm_tb.v
-
-# prepare the simulation
-vcs +vcs+lic+wait -debug clkmgr_dcm_tb glbl
-
-# run the simulation
-./simv -ucli -i ucli_commands.key
-
-# launch the viewer
-dve -vpd vcdplus.vpd -session vcs_session.tcl
diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/ucli_commands.key b/common/rtl/ipcore/clkmgr_dcm/simulation/functional/ucli_commands.key deleted file mode 100644 index 2bbdd0f..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/ucli_commands.key +++ /dev/null @@ -1,5 +0,0 @@ -call {$vcdpluson}
-call {$vcdplusmemon(clkmgr_dcm_tb.dut.counter)}
-run
-call {$vcdplusclose}
-quit
diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/vcs_session.tcl b/common/rtl/ipcore/clkmgr_dcm/simulation/functional/vcs_session.tcl deleted file mode 100644 index 628e55a..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/vcs_session.tcl +++ /dev/null @@ -1,18 +0,0 @@ -gui_open_window Wave
-gui_sg_create clkmgr_dcm_group
-gui_list_add_group -id Wave.1 {clkmgr_dcm_group}
-gui_sg_addsignal -group clkmgr_dcm_group {clkmgr_dcm_tb.test_phase}
-gui_set_radix -radix {ascii} -signals {clkmgr_dcm_tb.test_phase}
-gui_sg_addsignal -group clkmgr_dcm_group {{Input_clocks}} -divider
-gui_sg_addsignal -group clkmgr_dcm_group {clkmgr_dcm_tb.CLK_IN1}
-gui_sg_addsignal -group clkmgr_dcm_group {{Output_clocks}} -divider
-gui_sg_addsignal -group clkmgr_dcm_group {clkmgr_dcm_tb.dut.clk}
-gui_list_expand -id Wave.1 clkmgr_dcm_tb.dut.clk
-gui_sg_addsignal -group clkmgr_dcm_group {{Status_control}} -divider
-gui_sg_addsignal -group clkmgr_dcm_group {clkmgr_dcm_tb.RESET}
-gui_sg_addsignal -group clkmgr_dcm_group {clkmgr_dcm_tb.USE_INCLK_STOPPED}
-gui_sg_addsignal -group clkmgr_dcm_group {{Counters}} -divider
-gui_sg_addsignal -group clkmgr_dcm_group {clkmgr_dcm_tb.COUNT}
-gui_sg_addsignal -group clkmgr_dcm_group {clkmgr_dcm_tb.dut.counter}
-gui_list_expand -id Wave.1 clkmgr_dcm_tb.dut.counter
-gui_zoom -window Wave.1 -full
diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/wave.do b/common/rtl/ipcore/clkmgr_dcm/simulation/functional/wave.do deleted file mode 100644 index eee7422..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/wave.do +++ /dev/null @@ -1,60 +0,0 @@ -# file: wave.do
-#
-# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
-#
-# This file contains confidential and proprietary information
-# of Xilinx, Inc. and is protected under U.S. and
-# international copyright and other intellectual property
-# laws.
-#
-# DISCLAIMER
-# This disclaimer is not a license and does not grant any
-# rights to the materials distributed herewith. Except as
-# otherwise provided in a valid license issued to you by
-# Xilinx, and to the maximum extent permitted by applicable
-# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-# (2) Xilinx shall not be liable (whether in contract or tort,
-# including negligence, or under any other theory of
-# liability) for any loss or damage of any kind or nature
-# related to, arising under or in connection with these
-# materials, including for any direct, or any indirect,
-# special, incidental, or consequential loss or damage
-# (including loss of data, profits, goodwill, or any type of
-# loss or damage suffered as a result of any action brought
-# by a third party) even if such damage or loss was
-# reasonably foreseeable or Xilinx had been advised of the
-# possibility of the same.
-#
-# CRITICAL APPLICATIONS
-# Xilinx products are not designed or intended to be fail-
-# safe, or for use in any application requiring fail-safe
-# performance, such as life-support or safety devices or
-# systems, Class III medical devices, nuclear facilities,
-# applications related to the deployment of airbags, or any
-# other applications that could lead to death, personal
-# injury, or severe property or environmental damage
-# (individually and collectively, "Critical
-# Applications"). Customer assumes the sole risk and
-# liability of any use of Xilinx products in Critical
-# Applications, subject only to applicable laws and
-# regulations governing limitations on product liability.
-#
-# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-# PART OF THIS FILE AT ALL TIMES.
-#
-
-add wave -noupdate -format Literal -radix ascii /clkmgr_dcm_tb/test_phase
-add wave -noupdate -divider {Input clocks}
-add wave -noupdate -format Logic /clkmgr_dcm_tb/CLK_IN1
-add wave -noupdate -divider {Output clocks}
-add wave -noupdate -format Logic /clkmgr_dcm_tb/dut/clk
-add wave -noupdate -divider Status/control
-add wave -noupdate -format Logic /clkmgr_dcm_tb/RESET
-add wave -noupdate -format Logic /clkmgr_dcm_tb/INPUT_CLK_STOPPED
-add wave -noupdate -divider Counters
-add wave -noupdate -format Literal -radix hexadecimal /clkmgr_dcm_tb/COUNT
-add wave -noupdate -format Literal -radix hexadecimal /clkmgr_dcm_tb/dut/counter
diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/wave.sv b/common/rtl/ipcore/clkmgr_dcm/simulation/functional/wave.sv deleted file mode 100644 index c3c3eef..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/functional/wave.sv +++ /dev/null @@ -1,118 +0,0 @@ -# file: wave.sv
-#
-# (c) Copyright 2008 - 2010 Xilinx, Inc. All rights reserved.
-#
-# This file contains confidential and proprietary information
-# of Xilinx, Inc. and is protected under U.S. and
-# international copyright and other intellectual property
-# laws.
-#
-# DISCLAIMER
-# This disclaimer is not a license and does not grant any
-# rights to the materials distributed herewith. Except as
-# otherwise provided in a valid license issued to you by
-# Xilinx, and to the maximum extent permitted by applicable
-# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-# (2) Xilinx shall not be liable (whether in contract or tort,
-# including negligence, or under any other theory of
-# liability) for any loss or damage of any kind or nature
-# related to, arising under or in connection with these
-# materials, including for any direct, or any indirect,
-# special, incidental, or consequential loss or damage
-# (including loss of data, profits, goodwill, or any type of
-# loss or damage suffered as a result of any action brought
-# by a third party) even if such damage or loss was
-# reasonably foreseeable or Xilinx had been advised of the
-# possibility of the same.
-#
-# CRITICAL APPLICATIONS
-# Xilinx products are not designed or intended to be fail-
-# safe, or for use in any application requiring fail-safe
-# performance, such as life-support or safety devices or
-# systems, Class III medical devices, nuclear facilities,
-# applications related to the deployment of airbags, or any
-# other applications that could lead to death, personal
-# injury, or severe property or environmental damage
-# (individually and collectively, "Critical
-# Applications"). Customer assumes the sole risk and
-# liability of any use of Xilinx products in Critical
-# Applications, subject only to applicable laws and
-# regulations governing limitations on product liability.
-#
-# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-# PART OF THIS FILE AT ALL TIMES.
-#
-# Get the windows set up
-#
-if {[catch {window new WatchList -name "Design Browser 1" -geometry 1054x819+536+322}] != ""} {
- window geometry "Design Browser 1" 1054x819+536+322
-}
-window target "Design Browser 1" on
-browser using {Design Browser 1}
-browser set \
- -scope nc::clkmgr_dcm_tb
-browser yview see nc::clkmgr_dcm_tb
-browser timecontrol set -lock 0
-
-if {[catch {window new WaveWindow -name "Waveform 1" -geometry 1010x600+0+541}] != ""} {
- window geometry "Waveform 1" 1010x600+0+541
-}
-window target "Waveform 1" on
-waveform using {Waveform 1}
-waveform sidebar visibility partial
-waveform set \
- -primarycursor TimeA \
- -signalnames name \
- -signalwidth 175 \
- -units ns \
- -valuewidth 75
-cursor set -using TimeA -time 0
-waveform baseline set -time 0
-waveform xview limits 0 20000n
-
-#
-# Define signal groups
-#
-catch {group new -name {Output clocks} -overlay 0}
-catch {group new -name {Status/control} -overlay 0}
-catch {group new -name {Counters} -overlay 0}
-
-set id [waveform add -signals [list {nc::clkmgr_dcm_tb.CLK_IN1}]]
-
-group using {Output clocks}
-group set -overlay 0
-group set -comment {}
-group clear 0 end
-
-group insert \
- {clkmgr_dcm_tb.dut.clk} \
-
-group using {Counters}
-group set -overlay 0
-group set -comment {}
-group clear 0 end
-
-group insert \
- {clkmgr_dcm_tb.dut.counter} \
-
-group using {Status/control}
-group set -overlay 0
-group set -comment {}
-group clear 0 end
-
-group insert \
- {nc::clkmgr_dcm_tb.RESET} {nc::clkmgr_dcm_tb.INPUT_CLK_STOPPED}
-
-set id [waveform add -signals [list {nc::clkmgr_dcm_tb.COUNT} ]]
-
-set id [waveform add -signals [list {nc::clkmgr_dcm_tb.test_phase} ]]
-waveform format $id -radix %a
-
-set groupId [waveform add -groups {{Input clocks}}]
-set groupId [waveform add -groups {{Output clocks}}]
-set groupId [waveform add -groups {{Status/control}}]
-set groupId [waveform add -groups {{Counters}}]
diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/clkmgr_dcm_tb.v b/common/rtl/ipcore/clkmgr_dcm/simulation/timing/clkmgr_dcm_tb.v deleted file mode 100644 index 9618253..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/clkmgr_dcm_tb.v +++ /dev/null @@ -1,149 +0,0 @@ -// file: clkmgr_dcm_tb.v
-//
-// (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
-//
-// This file contains confidential and proprietary information
-// of Xilinx, Inc. and is protected under U.S. and
-// international copyright and other intellectual property
-// laws.
-//
-// DISCLAIMER
-// This disclaimer is not a license and does not grant any
-// rights to the materials distributed herewith. Except as
-// otherwise provided in a valid license issued to you by
-// Xilinx, and to the maximum extent permitted by applicable
-// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-// (2) Xilinx shall not be liable (whether in contract or tort,
-// including negligence, or under any other theory of
-// liability) for any loss or damage of any kind or nature
-// related to, arising under or in connection with these
-// materials, including for any direct, or any indirect,
-// special, incidental, or consequential loss or damage
-// (including loss of data, profits, goodwill, or any type of
-// loss or damage suffered as a result of any action brought
-// by a third party) even if such damage or loss was
-// reasonably foreseeable or Xilinx had been advised of the
-// possibility of the same.
-//
-// CRITICAL APPLICATIONS
-// Xilinx products are not designed or intended to be fail-
-// safe, or for use in any application requiring fail-safe
-// performance, such as life-support or safety devices or
-// systems, Class III medical devices, nuclear facilities,
-// applications related to the deployment of airbags, or any
-// other applications that could lead to death, personal
-// injury, or severe property or environmental damage
-// (individually and collectively, "Critical
-// Applications"). Customer assumes the sole risk and
-// liability of any use of Xilinx products in Critical
-// Applications, subject only to applicable laws and
-// regulations governing limitations on product liability.
-//
-// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-// PART OF THIS FILE AT ALL TIMES.
-//
-
-//----------------------------------------------------------------------------
-// Clocking wizard demonstration testbench
-//----------------------------------------------------------------------------
-// This demonstration testbench instantiates the example design for the
-// clocking wizard. Input clocks are toggled, which cause the clocking
-// network to lock and the counters to increment.
-//----------------------------------------------------------------------------
-
-`timescale 1ps/1ps
-
-`define wait_lock @(posedge CLK_VALID)
-
-module clkmgr_dcm_tb ();
-
- // Clock to Q delay of 100ps
- localparam TCQ = 100;
-
-
- // timescale is 1ps/1ps
- localparam ONE_NS = 1000;
- localparam PHASE_ERR_MARGIN = 100; // 100ps
- // how many cycles to run
- localparam COUNT_PHASE = 1024;
- // we'll be using the period in many locations
- localparam time PER1 = 20.0*ONE_NS;
- localparam time PER1_1 = PER1/2;
- localparam time PER1_2 = PER1 - PER1/2;
-
- // Declare the input clock signals
- reg CLK_IN1 = 1;
-
- // The high bit of the sampling counter
- wire COUNT;
- // Status and control signals
- reg RESET = 0;
- wire INPUT_CLK_STOPPED;
- wire CLK_VALID;
- reg COUNTER_RESET = 0;
-wire [1:1] CLK_OUT;
-//Freq Check using the M & D values setting and actual Frequency generated
-
- reg [13:0] timeout_counter = 14'b00000000000000;
-
- // Input clock generation
- //------------------------------------
- always begin
- CLK_IN1 = #PER1_1 ~CLK_IN1;
- CLK_IN1 = #PER1_2 ~CLK_IN1;
- end
-
- // Test sequence
- reg [15*8-1:0] test_phase = "";
- initial begin
- // Set up any display statements using time to be readable
- $timeformat(-12, 2, "ps", 10);
- $display ("Timing checks are not valid");
- COUNTER_RESET = 0;
- test_phase = "reset";
- RESET = 1;
- #(PER1*6);
- RESET = 0;
- test_phase = "wait lock";
- `wait_lock;
- #(PER1*6);
- COUNTER_RESET = 1;
- #(PER1*19.5)
- COUNTER_RESET = 0;
- #(PER1*1)
- $display ("Timing checks are valid");
- test_phase = "counting";
- #(PER1*COUNT_PHASE);
-
- $display("SIMULATION PASSED");
- $display("SYSTEM_CLOCK_COUNTER : %0d\n",$time/PER1);
- $finish;
- end
-
-
-
- // Instantiation of the example design containing the clock
- // network and sampling counters
- //---------------------------------------------------------
- clkmgr_dcm_exdes
- dut
- (// Clock in ports
- .CLK_IN1 (CLK_IN1),
- // Reset for logic in example design
- .COUNTER_RESET (COUNTER_RESET),
- .CLK_OUT (CLK_OUT),
- // High bits of the counters
- .COUNT (COUNT),
- // Status and control signals
- .RESET (RESET),
- .INPUT_CLK_STOPPED (INPUT_CLK_STOPPED),
- .CLK_VALID (CLK_VALID));
-
-
-// Freq Check
-
-endmodule
diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/sdf_cmd_file b/common/rtl/ipcore/clkmgr_dcm/simulation/timing/sdf_cmd_file deleted file mode 100644 index d59e315..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/sdf_cmd_file +++ /dev/null @@ -1,2 +0,0 @@ -COMPILED_SDF_FILE = "../../implement/results/routed.sdf.X",
-SCOPE = clkmgr_dcm_tb.dut;
diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simcmds.tcl b/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simcmds.tcl deleted file mode 100644 index 14523af..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simcmds.tcl +++ /dev/null @@ -1,9 +0,0 @@ -# file: simcmds.tcl
-
-# create the simulation script
-vcd dumpfile isim.vcd
-vcd dumpvars -m /clkmgr_dcm_tb -l 0
-wave add /
-run 50000ns
-quit
-
diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_isim.sh b/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_isim.sh deleted file mode 100644 index 0152cb0..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_isim.sh +++ /dev/null @@ -1,62 +0,0 @@ -# file: simulate_isim.sh
-#
-# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
-#
-# This file contains confidential and proprietary information
-# of Xilinx, Inc. and is protected under U.S. and
-# international copyright and other intellectual property
-# laws.
-#
-# DISCLAIMER
-# This disclaimer is not a license and does not grant any
-# rights to the materials distributed herewith. Except as
-# otherwise provided in a valid license issued to you by
-# Xilinx, and to the maximum extent permitted by applicable
-# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-# (2) Xilinx shall not be liable (whether in contract or tort,
-# including negligence, or under any other theory of
-# liability) for any loss or damage of any kind or nature
-# related to, arising under or in connection with these
-# materials, including for any direct, or any indirect,
-# special, incidental, or consequential loss or damage
-# (including loss of data, profits, goodwill, or any type of
-# loss or damage suffered as a result of any action brought
-# by a third party) even if such damage or loss was
-# reasonably foreseeable or Xilinx had been advised of the
-# possibility of the same.
-#
-# CRITICAL APPLICATIONS
-# Xilinx products are not designed or intended to be fail-
-# safe, or for use in any application requiring fail-safe
-# performance, such as life-support or safety devices or
-# systems, Class III medical devices, nuclear facilities,
-# applications related to the deployment of airbags, or any
-# other applications that could lead to death, personal
-# injury, or severe property or environmental damage
-# (individually and collectively, "Critical
-# Applications"). Customer assumes the sole risk and
-# liability of any use of Xilinx products in Critical
-# Applications, subject only to applicable laws and
-# regulations governing limitations on product liability.
-#
-# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-# PART OF THIS FILE AT ALL TIMES.
-#
-
-# create the project
-vlogcomp -work work ${XILINX}/verilog/src/glbl.v
-vlogcomp -work work ../../implement/results/routed.v
-vlogcomp -work work clkmgr_dcm_tb.v
-
-# compile the project
-fuse work.clkmgr_dcm_tb work.glbl -L secureip -L simprims_ver -o clkmgr_dcm_isim.exe
-
-# run the simulation script
-./clkmgr_dcm_isim.exe -tclbatch simcmds.tcl -sdfmax /clkmgr_dcm_tb/dut=../../implement/results/routed.sdf
-
-# run the simulation script
-#./clkmgr_dcm_isim.exe -gui -tclbatch simcmds.tcl
diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_mti.bat b/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_mti.bat deleted file mode 100644 index 8a08dc0..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_mti.bat +++ /dev/null @@ -1,59 +0,0 @@ -REM file: simulate_mti.bat
-REM
-REM (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
-REM
-REM This file contains confidential and proprietary information
-REM of Xilinx, Inc. and is protected under U.S. and
-REM international copyright and other intellectual property
-REM laws.
-REM
-REM DISCLAIMER
-REM This disclaimer is not a license and does not grant any
-REM rights to the materials distributed herewith. Except as
-REM otherwise provided in a valid license issued to you by
-REM Xilinx, and to the maximum extent permitted by applicable
-REM law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-REM WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-REM AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-REM BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-REM INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-REM (2) Xilinx shall not be liable (whether in contract or tort,
-REM including negligence, or under any other theory of
-REM liability) for any loss or damage of any kind or nature
-REM related to, arising under or in connection with these
-REM materials, including for any direct, or any indirect,
-REM special, incidental, or consequential loss or damage
-REM (including loss of data, profits, goodwill, or any type of
-REM loss or damage suffered as a result of any action brought
-REM by a third party) even if such damage or loss was
-REM reasonably foreseeable or Xilinx had been advised of the
-REM possibility of the same.
-REM
-REM CRITICAL APPLICATIONS
-REM Xilinx products are not designed or intended to be fail-
-REM safe, or for use in any application requiring fail-safe
-REM performance, such as life-support or safety devices or
-REM systems, Class III medical devices, nuclear facilities,
-REM applications related to the deployment of airbags, or any
-REM other applications that could lead to death, personal
-REM injury, or severe property or environmental damage
-REM (individually and collectively, "Critical
-REM Applications"). Customer assumes the sole risk and
-REM liability of any use of Xilinx products in Critical
-REM Applications, subject only to applicable laws and
-REM regulations governing limitations on product liability.
-REM
-REM THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-REM PART OF THIS FILE AT ALL TIMES.
-REM
-# set up the working directory
-set work work
-vlib work
-
-REM compile all of the files
-vlog -work work %XILINX%\verilog\src\glbl.v
-vlog -work work ..\..\implement\results\routed.v
-vlog -work work clkmgr_dcm_tb.v
-
-REM run the simulation
-vsim -c -t ps +transport_int_delays -voptargs="+acc" -L secureip -L simprims_ver -sdfmax clkmgr_dcm_tb\dut=..\..\implement\results\routed.sdf +no_notifier work.clkmgr_dcm_tb work.glbl
diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_mti.do b/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_mti.do deleted file mode 100644 index bfeb9c5..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_mti.do +++ /dev/null @@ -1,65 +0,0 @@ -# file: simulate_mti.do
-#
-# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
-#
-# This file contains confidential and proprietary information
-# of Xilinx, Inc. and is protected under U.S. and
-# international copyright and other intellectual property
-# laws.
-#
-# DISCLAIMER
-# This disclaimer is not a license and does not grant any
-# rights to the materials distributed herewith. Except as
-# otherwise provided in a valid license issued to you by
-# Xilinx, and to the maximum extent permitted by applicable
-# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-# (2) Xilinx shall not be liable (whether in contract or tort,
-# including negligence, or under any other theory of
-# liability) for any loss or damage of any kind or nature
-# related to, arising under or in connection with these
-# materials, including for any direct, or any indirect,
-# special, incidental, or consequential loss or damage
-# (including loss of data, profits, goodwill, or any type of
-# loss or damage suffered as a result of any action brought
-# by a third party) even if such damage or loss was
-# reasonably foreseeable or Xilinx had been advised of the
-# possibility of the same.
-#
-# CRITICAL APPLICATIONS
-# Xilinx products are not designed or intended to be fail-
-# safe, or for use in any application requiring fail-safe
-# performance, such as life-support or safety devices or
-# systems, Class III medical devices, nuclear facilities,
-# applications related to the deployment of airbags, or any
-# other applications that could lead to death, personal
-# injury, or severe property or environmental damage
-# (individually and collectively, "Critical
-# Applications"). Customer assumes the sole risk and
-# liability of any use of Xilinx products in Critical
-# Applications, subject only to applicable laws and
-# regulations governing limitations on product liability.
-#
-# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-# PART OF THIS FILE AT ALL TIMES.
-#
-
-# set up the working directory
-set work work
-vlib work
-
-# compile all of the files
-vlog -work work $env(XILINX)/verilog/src/glbl.v
-vlog -work work ../../implement/results/routed.v
-vlog -work work clkmgr_dcm_tb.v
-
-# run the simulation
-vsim -t ps +transport_int_delays -voptargs="+acc" -L secureip -L simprims_ver -sdfmax clkmgr_dcm_tb/dut=../../implement/results/routed.sdf +no_notifier work.clkmgr_dcm_tb work.glbl
-#do wave.do
-#log -r /*
-run 50000ns
-
-
diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_mti.sh b/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_mti.sh deleted file mode 100644 index b842adc..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_mti.sh +++ /dev/null @@ -1,61 +0,0 @@ -#/bin/sh
-# file: simulate_mti.sh
-#
-# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
-#
-# This file contains confidential and proprietary information
-# of Xilinx, Inc. and is protected under U.S. and
-# international copyright and other intellectual property
-# laws.
-#
-# DISCLAIMER
-# This disclaimer is not a license and does not grant any
-# rights to the materials distributed herewith. Except as
-# otherwise provided in a valid license issued to you by
-# Xilinx, and to the maximum extent permitted by applicable
-# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-# (2) Xilinx shall not be liable (whether in contract or tort,
-# including negligence, or under any other theory of
-# liability) for any loss or damage of any kind or nature
-# related to, arising under or in connection with these
-# materials, including for any direct, or any indirect,
-# special, incidental, or consequential loss or damage
-# (including loss of data, profits, goodwill, or any type of
-# loss or damage suffered as a result of any action brought
-# by a third party) even if such damage or loss was
-# reasonably foreseeable or Xilinx had been advised of the
-# possibility of the same.
-#
-# CRITICAL APPLICATIONS
-# Xilinx products are not designed or intended to be fail-
-# safe, or for use in any application requiring fail-safe
-# performance, such as life-support or safety devices or
-# systems, Class III medical devices, nuclear facilities,
-# applications related to the deployment of airbags, or any
-# other applications that could lead to death, personal
-# injury, or severe property or environmental damage
-# (individually and collectively, "Critical
-# Applications"). Customer assumes the sole risk and
-# liability of any use of Xilinx products in Critical
-# Applications, subject only to applicable laws and
-# regulations governing limitations on product liability.
-#
-# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-# PART OF THIS FILE AT ALL TIMES.
-#
-
-# set up the working directory
-set work work
-vlib work
-
-# compile all of the files
-vlog -work work $XILINX/verilog/src/glbl.v
-vlog -work work ../../implement/results/routed.v
-vlog -work work clkmgr_dcm_tb.v
-
-# run the simulation
-vsim -c -t ps +transport_int_delays -voptargs="+acc" -L secureip -L simprims_ver -sdfmax clkmgr_dcm_tb/dut=../../implement/results/routed.sdf +no_notifier work.clkmgr_dcm_tb work.glbl
diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_ncsim.sh b/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_ncsim.sh deleted file mode 100644 index fd18dde..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_ncsim.sh +++ /dev/null @@ -1,64 +0,0 @@ -#!/bin/sh
-# file: simulate_ncsim.sh
-#
-# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
-#
-# This file contains confidential and proprietary information
-# of Xilinx, Inc. and is protected under U.S. and
-# international copyright and other intellectual property
-# laws.
-#
-# DISCLAIMER
-# This disclaimer is not a license and does not grant any
-# rights to the materials distributed herewith. Except as
-# otherwise provided in a valid license issued to you by
-# Xilinx, and to the maximum extent permitted by applicable
-# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-# (2) Xilinx shall not be liable (whether in contract or tort,
-# including negligence, or under any other theory of
-# liability) for any loss or damage of any kind or nature
-# related to, arising under or in connection with these
-# materials, including for any direct, or any indirect,
-# special, incidental, or consequential loss or damage
-# (including loss of data, profits, goodwill, or any type of
-# loss or damage suffered as a result of any action brought
-# by a third party) even if such damage or loss was
-# reasonably foreseeable or Xilinx had been advised of the
-# possibility of the same.
-#
-# CRITICAL APPLICATIONS
-# Xilinx products are not designed or intended to be fail-
-# safe, or for use in any application requiring fail-safe
-# performance, such as life-support or safety devices or
-# systems, Class III medical devices, nuclear facilities,
-# applications related to the deployment of airbags, or any
-# other applications that could lead to death, personal
-# injury, or severe property or environmental damage
-# (individually and collectively, "Critical
-# Applications"). Customer assumes the sole risk and
-# liability of any use of Xilinx products in Critical
-# Applications, subject only to applicable laws and
-# regulations governing limitations on product liability.
-#
-# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-# PART OF THIS FILE AT ALL TIMES.
-#
-
-# set up the working directory
-mkdir work
-
-# compile all of the files
-ncvlog -work work ${XILINX}/verilog/src/glbl.v
-ncvlog -work work ../../implement/results/routed.v
-ncvlog -work work clkmgr_dcm_tb.v
-
-# elaborate and run the simulation
-ncsdfc ../../implement/results/routed.sdf
-
-ncelab -work work -access +wc -pulse_r 10 -nonotifier work.clkmgr_dcm_tb work.glbl -sdf_cmd_file sdf_cmd_file
-ncsim -input "@database -open -shm nc; probe -create -database nc -all -depth all; run 50000ns; exit" work.clkmgr_dcm_tb
-
diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_vcs.sh b/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_vcs.sh deleted file mode 100644 index 26a8c27..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/simulate_vcs.sh +++ /dev/null @@ -1,72 +0,0 @@ -#!/bin/sh
-# file: simulate_vcs.sh
-#
-# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
-#
-# This file contains confidential and proprietary information
-# of Xilinx, Inc. and is protected under U.S. and
-# international copyright and other intellectual property
-# laws.
-#
-# DISCLAIMER
-# This disclaimer is not a license and does not grant any
-# rights to the materials distributed herewith. Except as
-# otherwise provided in a valid license issued to you by
-# Xilinx, and to the maximum extent permitted by applicable
-# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-# (2) Xilinx shall not be liable (whether in contract or tort,
-# including negligence, or under any other theory of
-# liability) for any loss or damage of any kind or nature
-# related to, arising under or in connection with these
-# materials, including for any direct, or any indirect,
-# special, incidental, or consequential loss or damage
-# (including loss of data, profits, goodwill, or any type of
-# loss or damage suffered as a result of any action brought
-# by a third party) even if such damage or loss was
-# reasonably foreseeable or Xilinx had been advised of the
-# possibility of the same.
-#
-# CRITICAL APPLICATIONS
-# Xilinx products are not designed or intended to be fail-
-# safe, or for use in any application requiring fail-safe
-# performance, such as life-support or safety devices or
-# systems, Class III medical devices, nuclear facilities,
-# applications related to the deployment of airbags, or any
-# other applications that could lead to death, personal
-# injury, or severe property or environmental damage
-# (individually and collectively, "Critical
-# Applications"). Customer assumes the sole risk and
-# liability of any use of Xilinx products in Critical
-# Applications, subject only to applicable laws and
-# regulations governing limitations on product liability.
-#
-# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-# PART OF THIS FILE AT ALL TIMES.
-#
-
-# remove old files
-rm -rf simv* csrc DVEfiles AN.DB
-
-# compile all of the files
-# Note that -sverilog is not strictly required- You can
-# remove the -sverilog if you change the type of the
-# localparam for the periods in the testbench file to
-# [63:0] from time
- vlogan -sverilog \
- clkmgr_dcm_tb.v \
- ../../implement/results/routed.v
-
-
-# prepare the simulation
-vcs -sdf max:clkmgr_dcm_exdes:../../implement/results/routed.sdf +v2k -y $XILINX/verilog/src/simprims \
- +libext+.v -debug clkmgr_dcm_tb.v ../../implement/results/routed.v
-
-# run the simulation
-./simv -ucli -i ucli_commands.key
-
-# launch the viewer
-#dve -vpd vcdplus.vpd -session vcs_session.tcl
diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/ucli_commands.key b/common/rtl/ipcore/clkmgr_dcm/simulation/timing/ucli_commands.key deleted file mode 100644 index b32669e..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/ucli_commands.key +++ /dev/null @@ -1,5 +0,0 @@ -
-call {$vcdpluson}
-run 50000ns
-call {$vcdplusclose}
-quit
diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/vcs_session.tcl b/common/rtl/ipcore/clkmgr_dcm/simulation/timing/vcs_session.tcl deleted file mode 100644 index 6cc6e24..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/vcs_session.tcl +++ /dev/null @@ -1 +0,0 @@ -gui_open_window Wave
diff --git a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/wave.do b/common/rtl/ipcore/clkmgr_dcm/simulation/timing/wave.do deleted file mode 100644 index 7cc804b..0000000 --- a/common/rtl/ipcore/clkmgr_dcm/simulation/timing/wave.do +++ /dev/null @@ -1,71 +0,0 @@ -# file: wave.do
-#
-# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
-#
-# This file contains confidential and proprietary information
-# of Xilinx, Inc. and is protected under U.S. and
-# international copyright and other intellectual property
-# laws.
-#
-# DISCLAIMER
-# This disclaimer is not a license and does not grant any
-# rights to the materials distributed herewith. Except as
-# otherwise provided in a valid license issued to you by
-# Xilinx, and to the maximum extent permitted by applicable
-# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-# (2) Xilinx shall not be liable (whether in contract or tort,
-# including negligence, or under any other theory of
-# liability) for any loss or damage of any kind or nature
-# related to, arising under or in connection with these
-# materials, including for any direct, or any indirect,
-# special, incidental, or consequential loss or damage
-# (including loss of data, profits, goodwill, or any type of
-# loss or damage suffered as a result of any action brought
-# by a third party) even if such damage or loss was
-# reasonably foreseeable or Xilinx had been advised of the
-# possibility of the same.
-#
-# CRITICAL APPLICATIONS
-# Xilinx products are not designed or intended to be fail-
-# safe, or for use in any application requiring fail-safe
-# performance, such as life-support or safety devices or
-# systems, Class III medical devices, nuclear facilities,
-# applications related to the deployment of airbags, or any
-# other applications that could lead to death, personal
-# injury, or severe property or environmental damage
-# (individually and collectively, "Critical
-# Applications"). Customer assumes the sole risk and
-# liability of any use of Xilinx products in Critical
-# Applications, subject only to applicable laws and
-# regulations governing limitations on product liability.
-#
-# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-# PART OF THIS FILE AT ALL TIMES.
-#
-
-onerror {resume}
-quietly WaveActivateNextPane {} 0
-add wave -noupdate /clkmgr_dcm_tb/CLK_IN1
-add wave -noupdate /clkmgr_dcm_tb/COUNT
-add wave -noupdate /clkmgr_dcm_tb/RESET
-TreeUpdate [SetDefaultTree]
-WaveRestoreCursors {{Cursor 1} {3223025 ps} 0}
-configure wave -namecolwidth 238
-configure wave -valuecolwidth 107
-configure wave -justifyvalue left
-configure wave -signalnamewidth 0
-configure wave -snapdistance 10
-configure wave -datasetprefix 0
-configure wave -rowmargin 4
-configure wave -childrowmargin 2
-configure wave -gridoffset 0
-configure wave -gridperiod 1
-configure wave -griddelta 40
-configure wave -timeline 0
-configure wave -timelineunits ps
-update
-WaveRestoreZoom {0 ps} {74848022 ps}
diff --git a/common/rtl/ipcore/clkmgr_dcm_flist.txt b/common/rtl/ipcore/clkmgr_dcm_flist.txt deleted file mode 100644 index bd1b2cd..0000000 --- a/common/rtl/ipcore/clkmgr_dcm_flist.txt +++ /dev/null @@ -1,54 +0,0 @@ -# Output products list for <clkmgr_dcm>
-_xmsgs\pn_parser.xmsgs
-clkmgr_dcm.asy
-clkmgr_dcm.gise
-clkmgr_dcm.ucf
-clkmgr_dcm.v
-clkmgr_dcm.veo
-clkmgr_dcm.xco
-clkmgr_dcm.xdc
-clkmgr_dcm.xise
-clkmgr_dcm\clk_wiz_v3_6_readme.txt
-clkmgr_dcm\doc\clk_wiz_v3_6_readme.txt
-clkmgr_dcm\doc\clk_wiz_v3_6_vinfo.html
-clkmgr_dcm\doc\pg065_clk_wiz.pdf
-clkmgr_dcm\example_design\clkmgr_dcm_exdes.ucf
-clkmgr_dcm\example_design\clkmgr_dcm_exdes.v
-clkmgr_dcm\example_design\clkmgr_dcm_exdes.xdc
-clkmgr_dcm\implement\implement.bat
-clkmgr_dcm\implement\implement.sh
-clkmgr_dcm\implement\planAhead_ise.bat
-clkmgr_dcm\implement\planAhead_ise.sh
-clkmgr_dcm\implement\planAhead_ise.tcl
-clkmgr_dcm\implement\planAhead_rdn.bat
-clkmgr_dcm\implement\planAhead_rdn.sh
-clkmgr_dcm\implement\planAhead_rdn.tcl
-clkmgr_dcm\implement\xst.prj
-clkmgr_dcm\implement\xst.scr
-clkmgr_dcm\simulation\clkmgr_dcm_tb.v
-clkmgr_dcm\simulation\functional\simcmds.tcl
-clkmgr_dcm\simulation\functional\simulate_isim.bat
-clkmgr_dcm\simulation\functional\simulate_isim.sh
-clkmgr_dcm\simulation\functional\simulate_mti.bat
-clkmgr_dcm\simulation\functional\simulate_mti.do
-clkmgr_dcm\simulation\functional\simulate_mti.sh
-clkmgr_dcm\simulation\functional\simulate_ncsim.sh
-clkmgr_dcm\simulation\functional\simulate_vcs.sh
-clkmgr_dcm\simulation\functional\ucli_commands.key
-clkmgr_dcm\simulation\functional\vcs_session.tcl
-clkmgr_dcm\simulation\functional\wave.do
-clkmgr_dcm\simulation\functional\wave.sv
-clkmgr_dcm\simulation\timing\clkmgr_dcm_tb.v
-clkmgr_dcm\simulation\timing\sdf_cmd_file
-clkmgr_dcm\simulation\timing\simcmds.tcl
-clkmgr_dcm\simulation\timing\simulate_isim.sh
-clkmgr_dcm\simulation\timing\simulate_mti.bat
-clkmgr_dcm\simulation\timing\simulate_mti.do
-clkmgr_dcm\simulation\timing\simulate_mti.sh
-clkmgr_dcm\simulation\timing\simulate_ncsim.sh
-clkmgr_dcm\simulation\timing\simulate_vcs.sh
-clkmgr_dcm\simulation\timing\ucli_commands.key
-clkmgr_dcm\simulation\timing\vcs_session.tcl
-clkmgr_dcm\simulation\timing\wave.do
-clkmgr_dcm_flist.txt
-clkmgr_dcm_xmdf.tcl
diff --git a/common/rtl/ipcore/clkmgr_dcm_xmdf.tcl b/common/rtl/ipcore/clkmgr_dcm_xmdf.tcl deleted file mode 100644 index 307029b..0000000 --- a/common/rtl/ipcore/clkmgr_dcm_xmdf.tcl +++ /dev/null @@ -1,140 +0,0 @@ -# The package naming convention is <core_name>_xmdf
-package provide clkmgr_dcm_xmdf 1.0
-
-# This includes some utilities that support common XMDF operations
-package require utilities_xmdf
-
-# Define a namespace for this package. The name of the name space
-# is <core_name>_xmdf
-namespace eval ::clkmgr_dcm_xmdf {
-# Use this to define any statics
-}
-
-# Function called by client to rebuild the params and port arrays
-# Optional when the use context does not require the param or ports
-# arrays to be available.
-proc ::clkmgr_dcm_xmdf::xmdfInit { instance } {
-# Variable containg name of library into which module is compiled
-# Recommendation: <module_name>
-# Required
-utilities_xmdf::xmdfSetData $instance Module Attributes Name clkmgr_dcm
-}
-# ::clkmgr_dcm_xmdf::xmdfInit
-
-# Function called by client to fill in all the xmdf* data variables
-# based on the current settings of the parameters
-proc ::clkmgr_dcm_xmdf::xmdfApplyParams { instance } {
-
-set fcount 0
-# Array containing libraries that are assumed to exist
-# Examples include unisim and xilinxcorelib
-# Optional
-# In this example, we assume that the unisim library will
-# be magically
-# available to the simulation and synthesis tool
-utilities_xmdf::xmdfSetData $instance FileSet $fcount type logical_library
-utilities_xmdf::xmdfSetData $instance FileSet $fcount logical_library unisim
-incr fcount
-
-utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm/clk_wiz_readme.txt
-utilities_xmdf::xmdfSetData $instance FileSet $fcount type Ignore
-incr fcount
-
-utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm/doc/clk_wiz_ds709.pdf
-utilities_xmdf::xmdfSetData $instance FileSet $fcount type Ignore
-incr fcount
-
-utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm/doc/clk_wiz_gsg521.pdf
-utilities_xmdf::xmdfSetData $instance FileSet $fcount type Ignore
-incr fcount
-
-utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm/implement/implement.bat
-utilities_xmdf::xmdfSetData $instance FileSet $fcount type Ignore
-incr fcount
-
-utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm/implement/implement.sh
-utilities_xmdf::xmdfSetData $instance FileSet $fcount type Ignore
-incr fcount
-
-utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm/implement/xst.prj
-utilities_xmdf::xmdfSetData $instance FileSet $fcount type Ignore
-incr fcount
-
-utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm/implement/xst.scr
-utilities_xmdf::xmdfSetData $instance FileSet $fcount type Ignore
-incr fcount
-
-utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm/simulation/clkmgr_dcm_tb.v
-utilities_xmdf::xmdfSetData $instance FileSet $fcount type Ignore
-incr fcount
-
-utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm/simulation/functional/simcmds.tcl
-utilities_xmdf::xmdfSetData $instance FileSet $fcount type Ignore
-incr fcount
-
-utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm/simulation/functional/simulate_isim.sh
-utilities_xmdf::xmdfSetData $instance FileSet $fcount type Ignore
-incr fcount
-
-utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm/simulation/functional/simulate_mti.do
-utilities_xmdf::xmdfSetData $instance FileSet $fcount type Ignore
-incr fcount
-
-utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm/simulation/functional/simulate_ncsim.sh
-utilities_xmdf::xmdfSetData $instance FileSet $fcount type Ignore
-incr fcount
-
-utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm/simulation/functional/simulate_vcs.sh
-utilities_xmdf::xmdfSetData $instance FileSet $fcount type Ignore
-incr fcount
-
-utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm/simulation/functional/ucli_commands.key
-utilities_xmdf::xmdfSetData $instance FileSet $fcount type Ignore
-incr fcount
-
-utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm/simulation/functional/vcs_session.tcl
-utilities_xmdf::xmdfSetData $instance FileSet $fcount type Ignore
-incr fcount
-
-utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm/simulation/functional/wave.do
-utilities_xmdf::xmdfSetData $instance FileSet $fcount type Ignore
-incr fcount
-
-utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm/simulation/functional/wave.sv
-utilities_xmdf::xmdfSetData $instance FileSet $fcount type Ignore
-incr fcount
-
-utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm.asy
-utilities_xmdf::xmdfSetData $instance FileSet $fcount type asy
-incr fcount
-
-utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm.ejp
-utilities_xmdf::xmdfSetData $instance FileSet $fcount type AnyView
-incr fcount
-
-utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm.ucf
-utilities_xmdf::xmdfSetData $instance FileSet $fcount type ucf
-incr fcount
-
-utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm.v
-utilities_xmdf::xmdfSetData $instance FileSet $fcount type verilog
-incr fcount
-
-utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm.veo
-utilities_xmdf::xmdfSetData $instance FileSet $fcount type verilog_template
-incr fcount
-
-utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm.xco
-utilities_xmdf::xmdfSetData $instance FileSet $fcount type coregen_ip
-incr fcount
-
-utilities_xmdf::xmdfSetData $instance FileSet $fcount relative_path clkmgr_dcm_xmdf.tcl
-utilities_xmdf::xmdfSetData $instance FileSet $fcount type AnyView
-incr fcount
-
-utilities_xmdf::xmdfSetData $instance FileSet $fcount associated_module clkmgr_dcm
-incr fcount
-
-}
-
-# ::gen_comp_name_xmdf::xmdfApplyParams
diff --git a/common/rtl/ipcore/coregen.cgp b/common/rtl/ipcore/coregen.cgp deleted file mode 100644 index 8bc2e70..0000000 --- a/common/rtl/ipcore/coregen.cgp +++ /dev/null @@ -1,9 +0,0 @@ -SET busformat = BusFormatAngleBracketNotRipped -SET designentry = Verilog -SET device = xc6slx45 -SET devicefamily = spartan6 -SET flowvendor = Other -SET package = csg324 -SET speedgrade = -3 -SET verilogsim = true -SET vhdlsim = false diff --git a/common/rtl/ipcore/create_clkmgr_dcm.tcl b/common/rtl/ipcore/create_clkmgr_dcm.tcl deleted file mode 100644 index fec8dec..0000000 --- a/common/rtl/ipcore/create_clkmgr_dcm.tcl +++ /dev/null @@ -1,37 +0,0 @@ -##
-## Core Generator Run Script, generator for Project Navigator create command
-##
-
-proc findRtfPath { relativePath } {
- set xilenv ""
- if { [info exists ::env(XILINX) ] } {
- if { [info exists ::env(MYXILINX)] } {
- set xilenv [join [list $::env(MYXILINX) $::env(XILINX)] $::xilinx::path_sep ]
- } else {
- set xilenv $::env(XILINX)
- }
- }
- foreach path [ split $xilenv $::xilinx::path_sep ] {
- set fullPath [ file join $path $relativePath ]
- if { [ file exists $fullPath ] } {
- return $fullPath
- }
- }
- return ""
-}
-
-source [ findRtfPath "data/projnav/scripts/dpm_cgUtils.tcl" ]
-
-set result [ run_cg_create "xilinx.com:ip:clk_wiz:3.6" "clkmgr_dcm" "Clocking Wizard" "Clocking Wizard (xilinx.com:ip:clk_wiz:3.6) generated by Project Navigator" xc6slx45-3csg324 Verilog ]
-
-if { $result == 0 } {
- puts "Core Generator create command completed successfully."
-} elseif { $result == 1 } {
- puts "Core Generator create command failed."
-} elseif { $result == 3 || $result == 4 } {
- # convert 'version check' result to real return range, bypassing any messages.
- set result [ expr $result - 3 ]
-} else {
- puts "Core Generator create cancelled."
-}
-exit $result
diff --git a/common/rtl/ipcore/edit_clkmgr_dcm.tcl b/common/rtl/ipcore/edit_clkmgr_dcm.tcl deleted file mode 100644 index 4992eb1..0000000 --- a/common/rtl/ipcore/edit_clkmgr_dcm.tcl +++ /dev/null @@ -1,37 +0,0 @@ -##
-## Core Generator Run Script, generator for Project Navigator edit command
-##
-
-proc findRtfPath { relativePath } {
- set xilenv ""
- if { [info exists ::env(XILINX) ] } {
- if { [info exists ::env(MYXILINX)] } {
- set xilenv [join [list $::env(MYXILINX) $::env(XILINX)] $::xilinx::path_sep ]
- } else {
- set xilenv $::env(XILINX)
- }
- }
- foreach path [ split $xilenv $::xilinx::path_sep ] {
- set fullPath [ file join $path $relativePath ]
- if { [ file exists $fullPath ] } {
- return $fullPath
- }
- }
- return ""
-}
-
-source [ findRtfPath "data/projnav/scripts/dpm_cgUtils.tcl" ]
-
-set result [ run_cg_edit "clkmgr_dcm" xc6slx45-3csg324 Verilog ]
-
-if { $result == 0 } {
- puts "Core Generator edit command completed successfully."
-} elseif { $result == 1 } {
- puts "Core Generator edit command failed."
-} elseif { $result == 3 || $result == 4 } {
- # convert 'version check' result to real return range, bypassing any messages.
- set result [ expr $result - 3 ]
-} else {
- puts "Core Generator edit cancelled."
-}
-exit $result
|