path: root/rtl/modexpng_reductor.v

module modexpng_reductor
(
    clk, rst,
    ena, rdy,
    word_index_last,
    sel_wide_out, sel_narrow_out,
    rd_wide_xy_addr_aux, rd_wide_xy_bank_aux, rd_wide_x_din_aux, rd_wide_y_din_aux,
    rcmb_final_xy_bank,  rcmb_final_xy_addr,  rcmb_final_x_din,  rcmb_final_y_din,  rcmb_final_xy_valid,
    rdct_wide_xy_bank,   rdct_wide_xy_addr,   rdct_wide_x_dout,   rdct_wide_y_dout,   rdct_wide_xy_valid,
    rdct_narrow_xy_bank, rdct_narrow_xy_addr, rdct_narrow_x_dout, rdct_narrow_y_dout, rdct_narrow_xy_valid
);

    //
    // Headers
    //
    `include "modexpng_parameters.vh"
    //`include "../rtl_1/modexpng_mmm_fsm.vh"
    
    //`include "../rtl_1/modexpng_parameters_x8.vh"


    input                        clk;
    input                        rst;
    input                        ena;
    output                       rdy;
    /*
    input  [FSM_STATE_WIDTH-1:0] fsm_state_next;*/
    input [7:0]                  word_index_last;/*
    input                        dsp_xy_ce_p;
    */
    input [2:0] sel_wide_out;
    input [2:0] sel_narrow_out;
    /*
    input  [9*47-1:0] dsp_x_p;
    input  [9*47-1:0] dsp_y_p;
    input  [     4:0] col_index;
    input  [     4:0] col_index_last;
    *//*
    input  [     7:0] rd_narrow_xy_addr;
    input  [     1:0] rd_narrow_xy_bank;
    */
    input  [    BANK_ADDR_W -1:0] rd_wide_xy_bank_aux;
    input  [     7:0] rd_wide_xy_addr_aux;
    input  [    17:0] rd_wide_x_din_aux;
    input  [    17:0] rd_wide_y_din_aux;
    //
    input  [     BANK_ADDR_W -1:0] rcmb_final_xy_bank;
    input  [     7:0] rcmb_final_xy_addr;
    input  [    17:0] rcmb_final_x_din;
    input  [    17:0] rcmb_final_y_din;
    input             rcmb_final_xy_valid;

    output [     2:0] rdct_wide_xy_bank;
    output [     7:0] rdct_wide_xy_addr;
    output [    17:0] rdct_wide_x_dout;
    output [    17:0] rdct_wide_y_dout;
    output            rdct_wide_xy_valid;

    output [     2:0] rdct_narrow_xy_bank;
    output [     7:0] rdct_narrow_xy_addr;
    output [    17:0] rdct_narrow_x_dout;
    output [    17:0] rdct_narrow_y_dout;
    output            rdct_narrow_xy_valid;

    //
    // Ready
    //
    reg rdy_reg  = 1'b1;
    wire busy_now;

    assign rdy = rdy_reg;
    
    always @(posedge clk)
        //
        if (rst) rdy_reg <= 1'b1;
        else begin
            if (rdy && ena) rdy_reg <= 1'b0;
            if (!rdy && !busy_now) rdy_reg <= 1'b1;
        end
        
        

    //
    // Pipeline (Delay Match)
    //
    reg rcmb_xy_valid_dly1 = 1'b0;
    reg rcmb_xy_valid_dly2 = 1'b0;
    reg rcmb_xy_valid_dly3 = 1'b0;

    reg [BANK_ADDR_W -1:0] rcmb_xy_bank_dly1;
    reg [BANK_ADDR_W -1:0] rcmb_xy_bank_dly2;
    reg [BANK_ADDR_W -1:0] rcmb_xy_bank_dly3;

    reg [7:0] rcmb_xy_addr_dly1;
    reg [7:0] rcmb_xy_addr_dly2;
    reg [7:0] rcmb_xy_addr_dly3;

    reg [17:0] rcmb_x_dout_dly1;
    reg [17:0] rcmb_x_dout_dly2;
    reg [17:0] rcmb_x_dout_dly3;

    reg [17:0] rcmb_y_dout_dly1;
    reg [17:0] rcmb_y_dout_dly2;
    reg [17:0] rcmb_y_dout_dly3;
    
    always @(posedge clk) 
        //
        if (rst) begin
            rcmb_xy_valid_dly1 <= 1'b0;
            rcmb_xy_valid_dly2 <= 1'b0;
            rcmb_xy_valid_dly3 <= 1'b0;
        end else begin
            rcmb_xy_valid_dly1 <= rcmb_final_xy_valid;
            rcmb_xy_valid_dly2 <= rcmb_xy_valid_dly1;
            rcmb_xy_valid_dly3 <= rcmb_xy_valid_dly2;        
        end
    
    
    always @(posedge clk) begin
        //
        if (rcmb_final_xy_valid) begin
            rcmb_xy_bank_dly1 <= rcmb_final_xy_bank;
            rcmb_xy_addr_dly1 <= rcmb_final_xy_addr;
            rcmb_x_dout_dly1  <= rcmb_final_x_din;
            rcmb_y_dout_dly1  <= rcmb_final_y_din;
        end
        //
        if (rcmb_xy_valid_dly1) begin
            rcmb_xy_bank_dly2 <= rcmb_xy_bank_dly1;
            rcmb_xy_addr_dly2 <= rcmb_xy_addr_dly1;
            rcmb_x_dout_dly2  <= rcmb_x_dout_dly1;
            rcmb_y_dout_dly2  <= rcmb_y_dout_dly1;
        end
        //
        if (rcmb_xy_valid_dly2) begin
            rcmb_xy_bank_dly3 <= rcmb_xy_bank_dly2;
            rcmb_xy_addr_dly3 <= rcmb_xy_addr_dly2;
            rcmb_x_dout_dly3  <= rcmb_x_dout_dly2;
            rcmb_y_dout_dly3  <= rcmb_y_dout_dly2;
        end
        //
    end
        
    
    reg [ 1:0] rcmb_x_lsb_carry;
    reg [15:0] rcmb_x_lsb_dummy;
    reg [17:0] rcmb_x_lsb_dout;

    reg [ 1:0] rcmb_y_lsb_carry;
    reg [15:0] rcmb_y_lsb_dummy;
    reg [17:0] rcmb_y_lsb_dout;

    //reg [17:0] reductor_fat_bram_x_msb_dout;
    //reg        reductor_fat_bram_x_msb_dout_valid = 1'b0;
    //reg [ 7:0] reductor_fat_bram_x_msb_addr;

    //
    // Carry Computation
    //
    always @(posedge clk)
        //
        if (ena) begin
            rcmb_x_lsb_carry <= 2'b00;
            rcmb_y_lsb_carry <= 2'b00;
        end else if (rcmb_xy_valid_dly3)
            //
            case (rcmb_xy_bank_dly3)    
        
                BANK_RCMB_ML: begin
                    {rcmb_x_lsb_carry, rcmb_x_lsb_dummy} <= rcmb_x_dout_dly3 + rd_wide_x_din_aux + rcmb_x_lsb_carry;
                    {rcmb_y_lsb_carry, rcmb_y_lsb_dummy} <= rcmb_y_dout_dly3 + rd_wide_y_din_aux + rcmb_y_lsb_carry;
                end
                    
                BANK_RCMB_MH:
                    if (rcmb_xy_addr_dly3 == 8'd0) begin
                        {rcmb_x_lsb_carry, rcmb_x_lsb_dummy} <= rcmb_x_dout_dly3 + rd_wide_x_din_aux + rcmb_x_lsb_carry;
                        {rcmb_y_lsb_carry, rcmb_y_lsb_dummy} <= rcmb_y_dout_dly3 + rd_wide_y_din_aux + rcmb_y_lsb_carry;
                    end
                    
            endcase


    //
    // Reduction
    //
    reg [     2:0] wide_xy_bank;
    reg [     7:0] wide_xy_addr;
    reg [    17:0] wide_x_dout;
    reg [    17:0] wide_y_dout;
    reg            wide_xy_valid = 1'b0;

    reg [     2:0] narrow_xy_bank;
    reg [     7:0] narrow_xy_addr;
    reg [    17:0] narrow_x_dout;
    reg [    17:0] narrow_y_dout;
    reg            narrow_xy_valid = 1'b0;

    assign rdct_wide_xy_bank  = wide_xy_bank;
    assign rdct_wide_xy_addr  = wide_xy_addr;
    assign rdct_wide_x_dout   = wide_x_dout;
    assign rdct_wide_y_dout   = wide_y_dout;
    assign rdct_wide_xy_valid = wide_xy_valid;

    assign rdct_narrow_xy_bank  = narrow_xy_bank;
    assign rdct_narrow_xy_addr  = narrow_xy_addr;
    assign rdct_narrow_x_dout   = narrow_x_dout;
    assign rdct_narrow_y_dout   = narrow_y_dout;
    assign rdct_narrow_xy_valid = narrow_xy_valid;

    task _update_rdct_wide;
        input [ 2:0] bank;
        input [ 7:0] addr;
        input [17:0] dout_x;
        input [17:0] dout_y;
        input        valid;
        begin
            wide_xy_bank  <= bank;
            wide_xy_addr  <= addr;
            wide_x_dout   <= dout_x;
            wide_y_dout   <= dout_y;
            wide_xy_valid <= valid;
        end
    endtask
    
    task _update_rdct_narrow;
        input [ 2:0] bank;
        input [ 7:0] addr;
        input [17:0] dout_x;
        input [17:0] dout_y;
        input        valid;
        begin
            narrow_xy_bank  <= bank;
            narrow_xy_addr  <= addr;
            narrow_x_dout   <= dout_x;
            narrow_y_dout   <= dout_y;
            narrow_xy_valid <= valid;
        end
    endtask
    
    task set_rdct_wide;
        input [ 2:0] bank;
        input [ 7:0] addr;
        input [17:0] dout_x;
        input [17:0] dout_y;
        begin
            _update_rdct_wide(bank, addr, dout_x, dout_y, 1'b1);
        end
    endtask
    
    task set_rdct_narrow;
        input [ 2:0] bank;
        input [ 7:0] addr;
        input [17:0] dout_x;
        input [17:0] dout_y;
        begin
            _update_rdct_narrow(bank, addr, dout_x, dout_y, 1'b1);
        end
    endtask
    
    task clear_rdct_wide;
        begin
            _update_rdct_wide(3'bXXX, 8'hXX, {18{1'bX}}, {18{1'bX}}, 1'b0);
        end
    endtask

    task clear_rdct_narrow;
        begin
            _update_rdct_narrow(3'bXXX, 8'hXX, {18{1'bX}}, {18{1'bX}}, 1'b0);
        end
    endtask
    
    
    //
    //
    //
    wire [17:0] sum_rdct_x = rcmb_x_dout_dly3 + rd_wide_x_din_aux;
    wire [17:0] sum_rdct_y = rcmb_y_dout_dly3 + rd_wide_y_din_aux;
    
    wire [17:0] sum_rdct_x_carry = sum_rdct_x + {16'h0000, rcmb_x_lsb_carry};
    wire [17:0] sum_rdct_y_carry = sum_rdct_y + {16'h0000, rcmb_y_lsb_carry};
    
    
    //
    //
    //
    always @(posedge clk)
        //
        if (rst) begin
            clear_rdct_wide;
            clear_rdct_narrow;
        end else begin
            //
            clear_rdct_wide;
            clear_rdct_narrow;
            //
            if (rcmb_xy_valid_dly3)
                //
                case (rcmb_xy_bank_dly3)
                                    
                    BANK_RCMB_MH:
                        if (rcmb_xy_addr_dly3 == 8'd1) begin
                            set_rdct_wide  (sel_wide_out,   8'd0, sum_rdct_x_carry, sum_rdct_y_carry);
                            set_rdct_narrow(sel_narrow_out, 8'd0, sum_rdct_x_carry, sum_rdct_y_carry);
                        end else if (rcmb_xy_addr_dly3 > 8'd1) begin
                            set_rdct_wide  (sel_wide_out,   rcmb_xy_addr_dly3 - 1'b1, sum_rdct_x, sum_rdct_y);
                            set_rdct_narrow(sel_narrow_out, rcmb_xy_addr_dly3 - 1'b1, sum_rdct_x, sum_rdct_y);
                        end
                            
                    BANK_RCMB_EXT: begin
                        set_rdct_wide  (sel_wide_out,   word_index_last, rcmb_x_dout_dly3, rcmb_y_dout_dly3);
                        set_rdct_narrow(sel_narrow_out, word_index_last, rcmb_x_dout_dly3, rcmb_y_dout_dly3);
                    end

                endcase
            //
        end



    //
    // Busy
    //
    reg       busy_next = 1'b0;
    reg [2:0] busy_now_shreg = {3{1'b0}};

    assign busy_now = busy_now_shreg[2];
    
    always @(posedge clk)
        //
        if (rst) busy_now_shreg <= {3{1'b0}};
        else begin
            if (rdy && ena) busy_now_shreg <= {3{1'b1}};
            else            busy_now_shreg <= {busy_now_shreg[1:0], busy_next};
        end
    
    always @(posedge clk)
        //
        if (rst) busy_next <= 1'b0;
        else begin
            if (rdy && ena) busy_next <= 1'b1;
            if (!rdy && rcmb_xy_valid_dly3 && (rcmb_xy_bank_dly3 == BANK_RCMB_EXT)) busy_next <= 1'b0;    
        end

    
endmodule