diff options
Diffstat (limited to 'rtl/src/ipcore/clkmgr_dcm/example_design')
3 files changed, 293 insertions, 0 deletions
diff --git a/rtl/src/ipcore/clkmgr_dcm/example_design/clkmgr_dcm_exdes.ucf b/rtl/src/ipcore/clkmgr_dcm/example_design/clkmgr_dcm_exdes.ucf new file mode 100644 index 0000000..dffb528 --- /dev/null +++ b/rtl/src/ipcore/clkmgr_dcm/example_design/clkmgr_dcm_exdes.ucf @@ -0,0 +1,60 @@ +# file: clkmgr_dcm_exdes.ucf
+#
+# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
+#
+# This file contains confidential and proprietary information
+# of Xilinx, Inc. and is protected under U.S. and
+# international copyright and other intellectual property
+# laws.
+#
+# DISCLAIMER
+# This disclaimer is not a license and does not grant any
+# rights to the materials distributed herewith. Except as
+# otherwise provided in a valid license issued to you by
+# Xilinx, and to the maximum extent permitted by applicable
+# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+# (2) Xilinx shall not be liable (whether in contract or tort,
+# including negligence, or under any other theory of
+# liability) for any loss or damage of any kind or nature
+# related to, arising under or in connection with these
+# materials, including for any direct, or any indirect,
+# special, incidental, or consequential loss or damage
+# (including loss of data, profits, goodwill, or any type of
+# loss or damage suffered as a result of any action brought
+# by a third party) even if such damage or loss was
+# reasonably foreseeable or Xilinx had been advised of the
+# possibility of the same.
+#
+# CRITICAL APPLICATIONS
+# Xilinx products are not designed or intended to be fail-
+# safe, or for use in any application requiring fail-safe
+# performance, such as life-support or safety devices or
+# systems, Class III medical devices, nuclear facilities,
+# applications related to the deployment of airbags, or any
+# other applications that could lead to death, personal
+# injury, or severe property or environmental damage
+# (individually and collectively, "Critical
+# Applications"). Customer assumes the sole risk and
+# liability of any use of Xilinx products in Critical
+# Applications, subject only to applicable laws and
+# regulations governing limitations on product liability.
+#
+# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+# PART OF THIS FILE AT ALL TIMES.
+#
+
+# Input clock periods. These duplicate the values entered for the
+# input clocks. You can use these to time your system
+#----------------------------------------------------------------
+NET "CLK_IN1" TNM_NET = "CLK_IN1";
+TIMESPEC "TS_CLK_IN1" = PERIOD "CLK_IN1" 20.0 ns HIGH 50% INPUT_JITTER 200.0ps;
+
+
+# FALSE PATH constraints
+PIN "COUNTER_RESET" TIG;
+PIN "RESET" TIG;
+
diff --git a/rtl/src/ipcore/clkmgr_dcm/example_design/clkmgr_dcm_exdes.v b/rtl/src/ipcore/clkmgr_dcm/example_design/clkmgr_dcm_exdes.v new file mode 100644 index 0000000..10627b3 --- /dev/null +++ b/rtl/src/ipcore/clkmgr_dcm/example_design/clkmgr_dcm_exdes.v @@ -0,0 +1,164 @@ +// file: clkmgr_dcm_exdes.v
+//
+// (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
+//
+// This file contains confidential and proprietary information
+// of Xilinx, Inc. and is protected under U.S. and
+// international copyright and other intellectual property
+// laws.
+//
+// DISCLAIMER
+// This disclaimer is not a license and does not grant any
+// rights to the materials distributed herewith. Except as
+// otherwise provided in a valid license issued to you by
+// Xilinx, and to the maximum extent permitted by applicable
+// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+// (2) Xilinx shall not be liable (whether in contract or tort,
+// including negligence, or under any other theory of
+// liability) for any loss or damage of any kind or nature
+// related to, arising under or in connection with these
+// materials, including for any direct, or any indirect,
+// special, incidental, or consequential loss or damage
+// (including loss of data, profits, goodwill, or any type of
+// loss or damage suffered as a result of any action brought
+// by a third party) even if such damage or loss was
+// reasonably foreseeable or Xilinx had been advised of the
+// possibility of the same.
+//
+// CRITICAL APPLICATIONS
+// Xilinx products are not designed or intended to be fail-
+// safe, or for use in any application requiring fail-safe
+// performance, such as life-support or safety devices or
+// systems, Class III medical devices, nuclear facilities,
+// applications related to the deployment of airbags, or any
+// other applications that could lead to death, personal
+// injury, or severe property or environmental damage
+// (individually and collectively, "Critical
+// Applications"). Customer assumes the sole risk and
+// liability of any use of Xilinx products in Critical
+// Applications, subject only to applicable laws and
+// regulations governing limitations on product liability.
+//
+// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+// PART OF THIS FILE AT ALL TIMES.
+//
+
+//----------------------------------------------------------------------------
+// Clocking wizard example design
+//----------------------------------------------------------------------------
+// This example design instantiates the created clocking network, where each
+// output clock drives a counter. The high bit of each counter is ported.
+//----------------------------------------------------------------------------
+
+`timescale 1ps/1ps
+
+module clkmgr_dcm_exdes
+ #(
+ parameter TCQ = 100
+ )
+ (// Clock in ports
+ input CLK_IN1,
+ // Reset that only drives logic in example design
+ input COUNTER_RESET,
+ output [1:1] CLK_OUT,
+ // High bits of counters driven by clocks
+ output COUNT,
+ // Status and control signals
+ input RESET,
+ output INPUT_CLK_STOPPED,
+ output CLK_VALID
+ );
+
+ // Parameters for the counters
+ //-------------------------------
+ // Counter width
+ localparam C_W = 16;
+ // Create reset for the counters
+ wire reset_int = RESET || COUNTER_RESET;
+
+ reg rst_sync;
+ reg rst_sync_int;
+ reg rst_sync_int1;
+ reg rst_sync_int2;
+
+
+
+ // Declare the clocks and counter
+ wire clk_int;
+ wire clk_n;
+ wire clk;
+ reg [C_W-1:0] counter;
+
+ // Insert BUFGs on all input clocks that don't already have them
+ //--------------------------------------------------------------
+ BUFG clkin1_buf
+ (.O (clk_in1_buf),
+ .I (CLK_IN1));
+
+ // Instantiation of the clocking network
+ //--------------------------------------
+ clkmgr_dcm clknetwork
+ (// Clock in ports
+ .CLK_IN1 (clk_in1_buf),
+ // Clock out ports
+ .CLK_OUT1 (clk_int),
+ // Status and control signals
+ .RESET (RESET),
+ .INPUT_CLK_STOPPED (INPUT_CLK_STOPPED),
+ .CLK_VALID (CLK_VALID));
+
+ assign clk_n = ~clk;
+
+ ODDR2 clkout_oddr
+ (.Q (CLK_OUT[1]),
+ .C0 (clk),
+ .C1 (clk_n),
+ .CE (1'b1),
+ .D0 (1'b1),
+ .D1 (1'b0),
+ .R (1'b0),
+ .S (1'b0));
+
+ // Connect the output clocks to the design
+ //-----------------------------------------
+ assign clk = clk_int;
+
+
+ // Reset synchronizer
+ //-----------------------------------
+ always @(posedge reset_int or posedge clk) begin
+ if (reset_int) begin
+ rst_sync <= 1'b1;
+ rst_sync_int <= 1'b1;
+ rst_sync_int1 <= 1'b1;
+ rst_sync_int2 <= 1'b1;
+ end
+ else begin
+ rst_sync <= 1'b0;
+ rst_sync_int <= rst_sync;
+ rst_sync_int1 <= rst_sync_int;
+ rst_sync_int2 <= rst_sync_int1;
+ end
+ end
+
+
+ // Output clock sampling
+ //-----------------------------------
+ always @(posedge clk or posedge rst_sync_int2) begin
+ if (rst_sync_int2) begin
+ counter <= #TCQ { C_W { 1'b 0 } };
+ end else begin
+ counter <= #TCQ counter + 1'b 1;
+ end
+ end
+
+ // alias the high bit to the output
+ assign COUNT = counter[C_W-1];
+
+
+
+endmodule
diff --git a/rtl/src/ipcore/clkmgr_dcm/example_design/clkmgr_dcm_exdes.xdc b/rtl/src/ipcore/clkmgr_dcm/example_design/clkmgr_dcm_exdes.xdc new file mode 100644 index 0000000..787023d --- /dev/null +++ b/rtl/src/ipcore/clkmgr_dcm/example_design/clkmgr_dcm_exdes.xdc @@ -0,0 +1,69 @@ +# file: clkmgr_dcm_exdes.xdc
+#
+# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
+#
+# This file contains confidential and proprietary information
+# of Xilinx, Inc. and is protected under U.S. and
+# international copyright and other intellectual property
+# laws.
+#
+# DISCLAIMER
+# This disclaimer is not a license and does not grant any
+# rights to the materials distributed herewith. Except as
+# otherwise provided in a valid license issued to you by
+# Xilinx, and to the maximum extent permitted by applicable
+# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+# (2) Xilinx shall not be liable (whether in contract or tort,
+# including negligence, or under any other theory of
+# liability) for any loss or damage of any kind or nature
+# related to, arising under or in connection with these
+# materials, including for any direct, or any indirect,
+# special, incidental, or consequential loss or damage
+# (including loss of data, profits, goodwill, or any type of
+# loss or damage suffered as a result of any action brought
+# by a third party) even if such damage or loss was
+# reasonably foreseeable or Xilinx had been advised of the
+# possibility of the same.
+#
+# CRITICAL APPLICATIONS
+# Xilinx products are not designed or intended to be fail-
+# safe, or for use in any application requiring fail-safe
+# performance, such as life-support or safety devices or
+# systems, Class III medical devices, nuclear facilities,
+# applications related to the deployment of airbags, or any
+# other applications that could lead to death, personal
+# injury, or severe property or environmental damage
+# (individually and collectively, "Critical
+# Applications"). Customer assumes the sole risk and
+# liability of any use of Xilinx products in Critical
+# Applications, subject only to applicable laws and
+# regulations governing limitations on product liability.
+#
+# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+# PART OF THIS FILE AT ALL TIMES.
+#
+
+# Input clock periods. These duplicate the values entered for the
+# input clocks. You can use these to time your system
+#----------------------------------------------------------------
+create_clock -name CLK_IN1 -period 20.0 [get_ports CLK_IN1]
+set_propagated_clock CLK_IN1
+set_input_jitter CLK_IN1 0.2
+
+# FALSE PATH constraint added on COUNTER_RESET
+set_false_path -from [get_ports "COUNTER_RESET"]
+set_false_path -from [get_ports "RESET"]
+
+# Derived clock periods. These are commented out because they are
+# automatically propogated by the tools
+# However, if you'd like to use them for module level testing, you
+# can copy them into your module level timing checks
+#-----------------------------------------------------------------
+
+#-----------------------------------------------------------------
+
+#-----------------------------------------------------------------
|