Based on user/ft/stm32-dev-bridge, without the project-specific build

directories (and duplicated code).

1 files changed, 2298 insertions, 0 deletions

diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spi.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spi.c
new file mode 100644
index 0000000..481a52f
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spi.c
@@ -0,0 +1,2298 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_spi.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   SPI HAL module driver.
+  *
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Serial Peripheral Interface (SPI) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral Control functions
+  *           + Peripheral State functions
+  @verbatim
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+    [..]
+      The SPI HAL driver can be used as follows:
+
+      (#) Declare a SPI_HandleTypeDef handle structure, for example:
+          SPI_HandleTypeDef  hspi;
+
+      (#)Initialize the SPI low level resources by implementing the HAL_SPI_MspInit ()API:
+          (##) Enable the SPIx interface clock
+          (##) SPI pins configuration
+              (+++) Enable the clock for the SPI GPIOs
+              (+++) Configure these SPI pins as alternate function push-pull
+          (##) NVIC configuration if you need to use interrupt process
+              (+++) Configure the SPIx interrupt priority
+              (+++) Enable the NVIC SPI IRQ handle
+          (##) DMA Configuration if you need to use DMA process
+              (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive stream
+              (+++) Enable the DMAx interface clock using
+              (+++) Configure the DMA handle parameters
+              (+++) Configure the DMA Tx or Rx Stream
+              (+++) Associate the initialized hdma_tx handle to the hspi DMA Tx or Rx handle
+              (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx or Rx Stream
+
+      (#) Program the Mode, Direction , Data size, Baudrate Prescaler, NSS
+          management, Clock polarity and phase, FirstBit and CRC configuration in the hspi Init structure.
+
+      (#) Initialize the SPI registers by calling the HAL_SPI_Init() API:
+          (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc)
+              by calling the customized HAL_SPI_MspInit() API.
+     [..]
+       Circular mode restriction:
+      (#) The DMA circular mode cannot be used when the SPI is configured in these modes:
+          (##) Master 2Lines RxOnly
+          (##) Master 1Line Rx
+      (#) The CRC feature is not managed when the DMA circular mode is enabled
+      (#) When the SPI DMA Pause/Stop features are used, we must use the following APIs
+          the HAL_SPI_DMAPause()/ HAL_SPI_DMAStop() only under the SPI callbacks
+
+
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup SPI SPI
+  * @brief SPI HAL module driver
+  * @{
+  */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+#define SPI_TIMEOUT_VALUE  10
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup SPI_Private_Functions
+  * @{
+  */
+static void SPI_TxCloseIRQHandler(SPI_HandleTypeDef *hspi);
+static void SPI_TxISR(SPI_HandleTypeDef *hspi);
+static void SPI_RxCloseIRQHandler(SPI_HandleTypeDef *hspi);
+static void SPI_2LinesRxISR(SPI_HandleTypeDef *hspi);
+static void SPI_RxISR(SPI_HandleTypeDef *hspi);
+static void SPI_DMAEndTransmitReceive(SPI_HandleTypeDef *hspi);
+static void SPI_DMATransmitCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAHalfTransmitCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAHalfReceiveCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAHalfTransmitReceiveCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAError(DMA_HandleTypeDef *hdma);
+static HAL_StatusTypeDef SPI_WaitOnFlagUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup SPI_Exported_Functions SPI Exported Functions
+  * @{
+  */
+
+/** @defgroup SPI_Exported_Functions_Group1 Initialization and de-initialization functions
+ *  @brief    Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+              ##### Initialization and de-initialization functions #####
+ ===============================================================================
+    [..]  This subsection provides a set of functions allowing to initialize and
+          de-initialize the SPIx peripheral:
+
+      (+) User must implement HAL_SPI_MspInit() function in which he configures
+          all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
+
+      (+) Call the function HAL_SPI_Init() to configure the selected device with
+          the selected configuration:
+        (++) Mode
+        (++) Direction
+        (++) Data Size
+        (++) Clock Polarity and Phase
+        (++) NSS Management
+        (++) BaudRate Prescaler
+        (++) FirstBit
+        (++) TIMode
+        (++) CRC Calculation
+        (++) CRC Polynomial if CRC enabled
+
+      (+) Call the function HAL_SPI_DeInit() to restore the default configuration
+          of the selected SPIx peripheral.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the SPI according to the specified parameters
+  *         in the SPI_InitTypeDef and create the associated handle.
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi)
+{
+  /* Check the SPI handle allocation */
+  if(hspi == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_SPI_MODE(hspi->Init.Mode));
+  assert_param(IS_SPI_DIRECTION_MODE(hspi->Init.Direction));
+  assert_param(IS_SPI_DATASIZE(hspi->Init.DataSize));
+  assert_param(IS_SPI_CPOL(hspi->Init.CLKPolarity));
+  assert_param(IS_SPI_CPHA(hspi->Init.CLKPhase));
+  assert_param(IS_SPI_NSS(hspi->Init.NSS));
+  assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler));
+  assert_param(IS_SPI_FIRST_BIT(hspi->Init.FirstBit));
+  assert_param(IS_SPI_TIMODE(hspi->Init.TIMode));
+  assert_param(IS_SPI_CRC_CALCULATION(hspi->Init.CRCCalculation));
+  assert_param(IS_SPI_CRC_POLYNOMIAL(hspi->Init.CRCPolynomial));
+
+  if(hspi->State == HAL_SPI_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hspi->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware : GPIO, CLOCK, NVIC... */
+    HAL_SPI_MspInit(hspi);
+  }
+
+  hspi->State = HAL_SPI_STATE_BUSY;
+
+  /* Disable the selected SPI peripheral */
+  __HAL_SPI_DISABLE(hspi);
+
+  /*----------------------- SPIx CR1 & CR2 Configuration ---------------------*/
+  /* Configure : SPI Mode, Communication Mode, Data size, Clock polarity and phase, NSS management,
+  Communication speed, First bit and CRC calculation state */
+  hspi->Instance->CR1 = (hspi->Init.Mode | hspi->Init.Direction | hspi->Init.DataSize |
+                         hspi->Init.CLKPolarity | hspi->Init.CLKPhase | (hspi->Init.NSS & SPI_CR1_SSM) |
+                         hspi->Init.BaudRatePrescaler | hspi->Init.FirstBit  | hspi->Init.CRCCalculation);
+
+  /* Configure : NSS management */
+  hspi->Instance->CR2 = (((hspi->Init.NSS >> 16) & SPI_CR2_SSOE) | hspi->Init.TIMode);
+
+  /*---------------------------- SPIx CRCPOLY Configuration ------------------*/
+  /* Configure : CRC Polynomial */
+  hspi->Instance->CRCPR = hspi->Init.CRCPolynomial;
+
+  /* Activate the SPI mode (Make sure that I2SMOD bit in I2SCFGR register is reset) */
+  hspi->Instance->I2SCFGR &= (uint32_t)(~SPI_I2SCFGR_I2SMOD);
+
+  hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+  hspi->State = HAL_SPI_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the SPI peripheral
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_DeInit(SPI_HandleTypeDef *hspi)
+{
+  /* Check the SPI handle allocation */
+  if(hspi == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Disable the SPI Peripheral Clock */
+  __HAL_SPI_DISABLE(hspi);
+
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */
+  HAL_SPI_MspDeInit(hspi);
+
+  hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+  hspi->State = HAL_SPI_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hspi);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief SPI MSP Init
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @retval None
+  */
+ __weak void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi)
+ {
+   /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SPI_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief SPI MSP DeInit
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @retval None
+  */
+ __weak void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SPI_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup SPI_Exported_Functions_Group2 IO operation functions
+ *  @brief   Data transfers functions
+ *
+@verbatim
+  ==============================================================================
+                      ##### IO operation functions #####
+ ===============================================================================
+    This subsection provides a set of functions allowing to manage the SPI
+    data transfers.
+
+    [..] The SPI supports master and slave mode :
+
+    (#) There are two modes of transfer:
+       (++) Blocking mode: The communication is performed in polling mode.
+            The HAL status of all data processing is returned by the same function
+            after finishing transfer.
+       (++) No-Blocking mode: The communication is performed using Interrupts
+           or DMA, These APIs return the HAL status.
+           The end of the data processing will be indicated through the
+           dedicated SPI IRQ when using Interrupt mode or the DMA IRQ when
+           using DMA mode.
+           The HAL_SPI_TxCpltCallback(), HAL_SPI_RxCpltCallback() and HAL_SPI_TxRxCpltCallback() user callbacks
+           will be executed respectively at the end of the transmit or Receive process
+           The HAL_SPI_ErrorCallback()user callback will be executed when a communication error is detected
+
+    (#) APIs provided for these 2 transfer modes (Blocking mode or Non blocking mode using either Interrupt or DMA)
+        exist for 1Line (simplex) and 2Lines (full duplex) modes.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Transmit an amount of data in blocking mode
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @param  pData: pointer to data buffer
+  * @param  Size: amount of data to be sent
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+
+  if(hspi->State == HAL_SPI_STATE_READY)
+  {
+    if((pData == NULL ) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Check the parameters */
+    assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction));
+
+    /* Process Locked */
+    __HAL_LOCK(hspi);
+
+    /* Configure communication */
+    hspi->State = HAL_SPI_STATE_BUSY_TX;
+    hspi->ErrorCode   = HAL_SPI_ERROR_NONE;
+
+    hspi->pTxBuffPtr = pData;
+    hspi->TxXferSize = Size;
+    hspi->TxXferCount = Size;
+
+    /*Init field not used in handle to zero */
+    hspi->TxISR = 0;
+    hspi->RxISR = 0;
+    hspi->RxXferSize   = 0;
+    hspi->RxXferCount  = 0;
+
+    /* Reset CRC Calculation */
+    if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      SPI_RESET_CRC(hspi);
+    }
+
+    if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
+    {
+      /* Configure communication direction : 1Line */
+      SPI_1LINE_TX(hspi);
+    }
+
+    /* Check if the SPI is already enabled */
+    if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
+    {
+      /* Enable SPI peripheral */
+      __HAL_SPI_ENABLE(hspi);
+    }
+
+    /* Transmit data in 8 Bit mode */
+    if(hspi->Init.DataSize == SPI_DATASIZE_8BIT)
+    {
+      if((hspi->Init.Mode == SPI_MODE_SLAVE)|| (hspi->TxXferCount == 0x01))
+      {
+        hspi->Instance->DR = (*hspi->pTxBuffPtr++);
+        hspi->TxXferCount--;
+      }
+      while(hspi->TxXferCount > 0)
+      {
+        /* Wait until TXE flag is set to send data */
+        if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+        hspi->Instance->DR = (*hspi->pTxBuffPtr++);
+        hspi->TxXferCount--;
+      }
+      /* Enable CRC Transmission */
+      if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+      {
+        hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
+      }
+    }
+    /* Transmit data in 16 Bit mode */
+    else
+    {
+      if((hspi->Init.Mode == SPI_MODE_SLAVE) || (hspi->TxXferCount == 0x01))
+      {
+        hspi->Instance->DR = *((uint16_t*)hspi->pTxBuffPtr);
+        hspi->pTxBuffPtr+=2;
+        hspi->TxXferCount--;
+      }
+      while(hspi->TxXferCount > 0)
+      {
+        /* Wait until TXE flag is set to send data */
+        if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+        hspi->Instance->DR = *((uint16_t*)hspi->pTxBuffPtr);
+        hspi->pTxBuffPtr+=2;
+        hspi->TxXferCount--;
+      }
+      /* Enable CRC Transmission */
+      if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+      {
+        hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
+      }
+    }
+
+    /* Wait until TXE flag is set to send data */
+    if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, Timeout) != HAL_OK)
+    {
+      hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
+      return HAL_TIMEOUT;
+    }
+
+    /* Wait until Busy flag is reset before disabling SPI */
+    if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_BSY, SET, Timeout) != HAL_OK)
+    {
+      hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
+      return HAL_TIMEOUT;
+    }
+
+    /* Clear OVERRUN flag in 2 Lines communication mode because received is not read */
+    if(hspi->Init.Direction == SPI_DIRECTION_2LINES)
+    {
+      __HAL_SPI_CLEAR_OVRFLAG(hspi);
+    }
+
+    hspi->State = HAL_SPI_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hspi);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receive an amount of data in blocking mode
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @param  pData: pointer to data buffer
+  * @param  Size: amount of data to be sent
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  __IO uint16_t tmpreg;
+  uint32_t tmp = 0;
+
+  if(hspi->State == HAL_SPI_STATE_READY)
+  {
+    if((pData == NULL ) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hspi);
+
+    /* Configure communication */
+    hspi->State       = HAL_SPI_STATE_BUSY_RX;
+    hspi->ErrorCode   = HAL_SPI_ERROR_NONE;
+
+    hspi->pRxBuffPtr  = pData;
+    hspi->RxXferSize  = Size;
+    hspi->RxXferCount = Size;
+
+    /*Init field not used in handle to zero */
+    hspi->RxISR = 0;
+    hspi->TxISR = 0;
+    hspi->TxXferSize   = 0;
+    hspi->TxXferCount  = 0;
+
+    /* Configure communication direction : 1Line */
+    if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
+    {
+      SPI_1LINE_RX(hspi);
+    }
+
+    /* Reset CRC Calculation */
+    if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      SPI_RESET_CRC(hspi);
+    }
+
+    if((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES))
+    {
+      /* Process Unlocked */
+      __HAL_UNLOCK(hspi);
+
+      /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */
+      return HAL_SPI_TransmitReceive(hspi, pData, pData, Size, Timeout);
+    }
+
+    /* Check if the SPI is already enabled */
+    if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
+    {
+      /* Enable SPI peripheral */
+      __HAL_SPI_ENABLE(hspi);
+    }
+
+    /* Receive data in 8 Bit mode */
+    if(hspi->Init.DataSize == SPI_DATASIZE_8BIT)
+    {
+      while(hspi->RxXferCount > 1)
+      {
+        /* Wait until RXNE flag is set */
+        if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+
+        (*hspi->pRxBuffPtr++) = hspi->Instance->DR;
+        hspi->RxXferCount--;
+      }
+      /* Enable CRC Transmission */
+      if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+      {
+        hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
+      }
+    }
+    /* Receive data in 16 Bit mode */
+    else
+    {
+      while(hspi->RxXferCount > 1)
+      {
+        /* Wait until RXNE flag is set to read data */
+        if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+
+        *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR;
+        hspi->pRxBuffPtr+=2;
+        hspi->RxXferCount--;
+      }
+      /* Enable CRC Transmission */
+      if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+      {
+        hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
+      }
+    }
+
+    /* Wait until RXNE flag is set */
+    if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+
+    /* Receive last data in 8 Bit mode */
+    if(hspi->Init.DataSize == SPI_DATASIZE_8BIT)
+    {
+      (*hspi->pRxBuffPtr++) = hspi->Instance->DR;
+    }
+    /* Receive last data in 16 Bit mode */
+    else
+    {
+      *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR;
+      hspi->pRxBuffPtr+=2;
+    }
+    hspi->RxXferCount--;
+
+    /* Wait until RXNE flag is set: CRC Received */
+    if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+      {
+        hspi->ErrorCode |= HAL_SPI_ERROR_CRC;
+        return HAL_TIMEOUT;
+      }
+
+      /* Read CRC to Flush RXNE flag */
+      tmpreg = hspi->Instance->DR;
+      UNUSED(tmpreg);
+    }
+
+    if((hspi->Init.Mode == SPI_MODE_MASTER)&&((hspi->Init.Direction == SPI_DIRECTION_1LINE)||(hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY)))
+    {
+      /* Disable SPI peripheral */
+      __HAL_SPI_DISABLE(hspi);
+    }
+
+    hspi->State = HAL_SPI_STATE_READY;
+
+    tmp = __HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR);
+    /* Check if CRC error occurred */
+    if((hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) && (tmp != RESET))
+    {
+      hspi->ErrorCode |= HAL_SPI_ERROR_CRC;
+
+      /* Reset CRC Calculation */
+      SPI_RESET_CRC(hspi);
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hspi);
+
+      return HAL_ERROR;
+    }
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hspi);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Transmit and Receive an amount of data in blocking mode
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @param  pTxData: pointer to transmission data buffer
+  * @param  pRxData: pointer to reception data buffer to be
+  * @param  Size: amount of data to be sent
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout)
+{
+  __IO uint16_t tmpreg;
+  uint32_t tmpstate = 0, tmp = 0;
+
+  tmpstate = hspi->State;
+  if((tmpstate == HAL_SPI_STATE_READY) || (tmpstate == HAL_SPI_STATE_BUSY_RX))
+  {
+    if((pTxData == NULL ) || (pRxData == NULL ) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Check the parameters */
+    assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction));
+
+    /* Process Locked */
+    __HAL_LOCK(hspi);
+
+    /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */
+    if(hspi->State == HAL_SPI_STATE_READY)
+    {
+      hspi->State = HAL_SPI_STATE_BUSY_TX_RX;
+    }
+
+     /* Configure communication */
+    hspi->ErrorCode   = HAL_SPI_ERROR_NONE;
+
+    hspi->pRxBuffPtr  = pRxData;
+    hspi->RxXferSize  = Size;
+    hspi->RxXferCount = Size;
+
+    hspi->pTxBuffPtr  = pTxData;
+    hspi->TxXferSize  = Size;
+    hspi->TxXferCount = Size;
+
+    /*Init field not used in handle to zero */
+    hspi->RxISR = 0;
+    hspi->TxISR = 0;
+
+    /* Reset CRC Calculation */
+    if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      SPI_RESET_CRC(hspi);
+    }
+
+    /* Check if the SPI is already enabled */
+    if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
+    {
+      /* Enable SPI peripheral */
+      __HAL_SPI_ENABLE(hspi);
+    }
+
+    /* Transmit and Receive data in 16 Bit mode */
+    if(hspi->Init.DataSize == SPI_DATASIZE_16BIT)
+    {
+      if((hspi->Init.Mode == SPI_MODE_SLAVE) || ((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->TxXferCount == 0x01)))
+      {
+        hspi->Instance->DR = *((uint16_t*)hspi->pTxBuffPtr);
+        hspi->pTxBuffPtr+=2;
+        hspi->TxXferCount--;
+      }
+      if(hspi->TxXferCount == 0)
+      {
+        /* Enable CRC Transmission */
+        if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+        {
+          hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
+        }
+
+        /* Wait until RXNE flag is set */
+        if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+
+        *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR;
+        hspi->pRxBuffPtr+=2;
+        hspi->RxXferCount--;
+      }
+      else
+      {
+        while(hspi->TxXferCount > 0)
+        {
+          /* Wait until TXE flag is set to send data */
+          if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, Timeout) != HAL_OK)
+          {
+            return HAL_TIMEOUT;
+          }
+
+          hspi->Instance->DR = *((uint16_t*)hspi->pTxBuffPtr);
+          hspi->pTxBuffPtr+=2;
+          hspi->TxXferCount--;
+
+          /* Enable CRC Transmission */
+          if((hspi->TxXferCount == 0) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE))
+          {
+            hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
+          }
+
+          /* Wait until RXNE flag is set */
+          if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+          {
+            return HAL_TIMEOUT;
+          }
+
+          *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR;
+          hspi->pRxBuffPtr+=2;
+          hspi->RxXferCount--;
+        }
+        /* Receive the last byte */
+        if(hspi->Init.Mode == SPI_MODE_SLAVE)
+        {
+          /* Wait until RXNE flag is set */
+          if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+          {
+            return HAL_TIMEOUT;
+          }
+
+          *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR;
+          hspi->pRxBuffPtr+=2;
+          hspi->RxXferCount--;
+        }
+      }
+    }
+    /* Transmit and Receive data in 8 Bit mode */
+    else
+    {
+      if((hspi->Init.Mode == SPI_MODE_SLAVE) || ((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->TxXferCount == 0x01)))
+      {
+        hspi->Instance->DR = (*hspi->pTxBuffPtr++);
+        hspi->TxXferCount--;
+      }
+      if(hspi->TxXferCount == 0)
+      {
+        /* Enable CRC Transmission */
+        if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+        {
+          hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
+        }
+
+        /* Wait until RXNE flag is set */
+        if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+
+        (*hspi->pRxBuffPtr) = hspi->Instance->DR;
+        hspi->RxXferCount--;
+      }
+      else
+      {
+        while(hspi->TxXferCount > 0)
+        {
+          /* Wait until TXE flag is set to send data */
+          if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, Timeout) != HAL_OK)
+          {
+            return HAL_TIMEOUT;
+          }
+
+          hspi->Instance->DR = (*hspi->pTxBuffPtr++);
+          hspi->TxXferCount--;
+
+          /* Enable CRC Transmission */
+          if((hspi->TxXferCount == 0) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE))
+          {
+            hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
+          }
+
+            /* Wait until RXNE flag is set */
+            if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+            {
+              return HAL_TIMEOUT;
+            }
+
+            (*hspi->pRxBuffPtr++) = hspi->Instance->DR;
+            hspi->RxXferCount--;
+        }
+        if(hspi->Init.Mode == SPI_MODE_SLAVE)
+        {
+          /* Wait until RXNE flag is set */
+          if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+          {
+            return HAL_TIMEOUT;
+          }
+
+          (*hspi->pRxBuffPtr++) = hspi->Instance->DR;
+          hspi->RxXferCount--;
+        }
+      }
+    }
+
+    /* Read CRC from DR to close CRC calculation process */
+    if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      /* Wait until RXNE flag is set */
+      if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+      {
+        hspi->ErrorCode |= HAL_SPI_ERROR_CRC;
+        return HAL_TIMEOUT;
+      }
+      /* Read CRC */
+      tmpreg = hspi->Instance->DR;
+      UNUSED(tmpreg);
+    }
+
+    /* Wait until Busy flag is reset before disabling SPI */
+    if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_BSY, SET, Timeout) != HAL_OK)
+    {
+      hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
+      return HAL_TIMEOUT;
+    }
+
+    hspi->State = HAL_SPI_STATE_READY;
+
+    tmp = __HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR);
+    /* Check if CRC error occurred */
+    if((hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) && (tmp != RESET))
+    {
+      hspi->ErrorCode |= HAL_SPI_ERROR_CRC;
+
+      /* Reset CRC Calculation */
+      if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+      {
+        SPI_RESET_CRC(hspi);
+      }
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hspi);
+
+      return HAL_ERROR;
+    }
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hspi);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Transmit an amount of data in no-blocking mode with Interrupt
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @param  pData: pointer to data buffer
+  * @param  Size: amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size)
+{
+  if(hspi->State == HAL_SPI_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Check the parameters */
+    assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction));
+
+    /* Process Locked */
+    __HAL_LOCK(hspi);
+
+    /* Configure communication */
+    hspi->State        = HAL_SPI_STATE_BUSY_TX;
+    hspi->ErrorCode    = HAL_SPI_ERROR_NONE;
+
+    hspi->TxISR = &SPI_TxISR;
+    hspi->pTxBuffPtr   = pData;
+    hspi->TxXferSize   = Size;
+    hspi->TxXferCount  = Size;
+
+    /*Init field not used in handle to zero */
+    hspi->RxISR = 0;
+    hspi->RxXferSize   = 0;
+    hspi->RxXferCount  = 0;
+
+    /* Configure communication direction : 1Line */
+    if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
+    {
+      SPI_1LINE_TX(hspi);
+    }
+
+    /* Reset CRC Calculation */
+    if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      SPI_RESET_CRC(hspi);
+    }
+
+    if (hspi->Init.Direction == SPI_DIRECTION_2LINES)
+    {
+      __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE));
+    }else
+    {
+      /* Enable TXE and ERR interrupt */
+      __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_ERR));
+    }
+    /* Process Unlocked */
+    __HAL_UNLOCK(hspi);
+
+    /* Check if the SPI is already enabled */
+    if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
+    {
+      /* Enable SPI peripheral */
+      __HAL_SPI_ENABLE(hspi);
+    }
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receive an amount of data in no-blocking mode with Interrupt
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @param  pData: pointer to data buffer
+  * @param  Size: amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size)
+{
+  if(hspi->State == HAL_SPI_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hspi);
+
+    /* Configure communication */
+    hspi->State        = HAL_SPI_STATE_BUSY_RX;
+    hspi->ErrorCode    = HAL_SPI_ERROR_NONE;
+
+    hspi->RxISR = &SPI_RxISR;
+    hspi->pRxBuffPtr   = pData;
+    hspi->RxXferSize   = Size;
+    hspi->RxXferCount  = Size ;
+
+   /*Init field not used in handle to zero */
+    hspi->TxISR = 0;
+    hspi->TxXferSize   = 0;
+    hspi->TxXferCount  = 0;
+
+    /* Configure communication direction : 1Line */
+    if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
+    {
+       SPI_1LINE_RX(hspi);
+    }
+    else if((hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->Init.Mode == SPI_MODE_MASTER))
+    {
+       /* Process Unlocked */
+       __HAL_UNLOCK(hspi);
+
+       /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */
+       return HAL_SPI_TransmitReceive_IT(hspi, pData, pData, Size);
+    }
+
+    /* Reset CRC Calculation */
+    if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      SPI_RESET_CRC(hspi);
+    }
+
+    /* Enable TXE and ERR interrupt */
+    __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR));
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hspi);
+
+    /* Note : The SPI must be enabled after unlocking current process
+              to avoid the risk of SPI interrupt handle execution before current
+              process unlock */
+
+        /* Check if the SPI is already enabled */
+    if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
+    {
+      /* Enable SPI peripheral */
+      __HAL_SPI_ENABLE(hspi);
+    }
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Transmit and Receive an amount of data in no-blocking mode with Interrupt
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @param  pTxData: pointer to transmission data buffer
+  * @param  pRxData: pointer to reception data buffer to be
+  * @param  Size: amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size)
+{
+ uint32_t tmpstate = 0;
+
+ tmpstate = hspi->State;
+  if((tmpstate == HAL_SPI_STATE_READY) || \
+     ((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmpstate == HAL_SPI_STATE_BUSY_RX)))
+  {
+    if((pTxData == NULL ) || (pRxData == NULL ) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Check the parameters */
+    assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction));
+
+    /* Process locked */
+    __HAL_LOCK(hspi);
+
+    /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */
+    if(hspi->State != HAL_SPI_STATE_BUSY_RX)
+    {
+      hspi->State = HAL_SPI_STATE_BUSY_TX_RX;
+    }
+
+    /* Configure communication */
+    hspi->ErrorCode    = HAL_SPI_ERROR_NONE;
+
+    hspi->TxISR = &SPI_TxISR;
+    hspi->pTxBuffPtr   = pTxData;
+    hspi->TxXferSize   = Size;
+    hspi->TxXferCount  = Size;
+
+    hspi->RxISR = &SPI_2LinesRxISR;
+    hspi->pRxBuffPtr   = pRxData;
+    hspi->RxXferSize   = Size;
+    hspi->RxXferCount  = Size;
+
+    /* Reset CRC Calculation */
+    if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      SPI_RESET_CRC(hspi);
+    }
+
+    /* Enable TXE, RXNE and ERR interrupt */
+    __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR));
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hspi);
+
+    /* Check if the SPI is already enabled */
+    if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
+    {
+      /* Enable SPI peripheral */
+      __HAL_SPI_ENABLE(hspi);
+    }
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Transmit an amount of data in no-blocking mode with DMA
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @param  pData: pointer to data buffer
+  * @param  Size: amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size)
+{
+  if(hspi->State == HAL_SPI_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Check the parameters */
+    assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction));
+
+    /* Process Locked */
+    __HAL_LOCK(hspi);
+
+    /* Configure communication */
+    hspi->State       = HAL_SPI_STATE_BUSY_TX;
+    hspi->ErrorCode   = HAL_SPI_ERROR_NONE;
+
+    hspi->pTxBuffPtr  = pData;
+    hspi->TxXferSize  = Size;
+    hspi->TxXferCount = Size;
+
+    /*Init field not used in handle to zero */
+    hspi->TxISR = 0;
+    hspi->RxISR = 0;
+    hspi->RxXferSize   = 0;
+    hspi->RxXferCount  = 0;
+
+    /* Configure communication direction : 1Line */
+    if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
+    {
+      SPI_1LINE_TX(hspi);
+    }
+
+    /* Reset CRC Calculation */
+    if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      SPI_RESET_CRC(hspi);
+    }
+
+    /* Set the SPI TxDMA Half transfer complete callback */
+    hspi->hdmatx->XferHalfCpltCallback = SPI_DMAHalfTransmitCplt;
+
+    /* Set the SPI TxDMA transfer complete callback */
+    hspi->hdmatx->XferCpltCallback = SPI_DMATransmitCplt;
+
+    /* Set the DMA error callback */
+    hspi->hdmatx->XferErrorCallback = SPI_DMAError;
+
+    /* Enable the Tx DMA Stream */
+    HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR, hspi->TxXferCount);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hspi);
+
+    /* Check if the SPI is already enabled */
+    if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
+    {
+      /* Enable SPI peripheral */
+      __HAL_SPI_ENABLE(hspi);
+    }
+
+    /* Enable Tx DMA Request */
+    hspi->Instance->CR2 |= SPI_CR2_TXDMAEN;
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receive an amount of data in no-blocking mode with DMA
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *         the configuration information for SPI module.
+  * @param  pData: pointer to data buffer
+  * @note  When the CRC feature is enabled the pData Length must be Size + 1.
+  * @param  Size: amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size)
+{
+  if(hspi->State == HAL_SPI_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hspi);
+
+    /* Configure communication */
+    hspi->State       = HAL_SPI_STATE_BUSY_RX;
+    hspi->ErrorCode   = HAL_SPI_ERROR_NONE;
+
+    hspi->pRxBuffPtr  = pData;
+    hspi->RxXferSize  = Size;
+    hspi->RxXferCount = Size;
+
+    /*Init field not used in handle to zero */
+    hspi->RxISR = 0;
+    hspi->TxISR = 0;
+    hspi->TxXferSize   = 0;
+    hspi->TxXferCount  = 0;
+
+    /* Configure communication direction : 1Line */
+    if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
+    {
+       SPI_1LINE_RX(hspi);
+    }
+    else if((hspi->Init.Direction == SPI_DIRECTION_2LINES)&&(hspi->Init.Mode == SPI_MODE_MASTER))
+    {
+       /* Process Unlocked */
+       __HAL_UNLOCK(hspi);
+
+       /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */
+       return HAL_SPI_TransmitReceive_DMA(hspi, pData, pData, Size);
+    }
+
+    /* Reset CRC Calculation */
+    if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      SPI_RESET_CRC(hspi);
+    }
+
+    /* Set the SPI RxDMA Half transfer complete callback */
+    hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfReceiveCplt;
+
+    /* Set the SPI Rx DMA transfer complete callback */
+    hspi->hdmarx->XferCpltCallback = SPI_DMAReceiveCplt;
+
+    /* Set the DMA error callback */
+    hspi->hdmarx->XferErrorCallback = SPI_DMAError;
+
+    /* Enable the Rx DMA Stream */
+    HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr, hspi->RxXferCount);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hspi);
+
+    /* Check if the SPI is already enabled */
+    if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
+    {
+      /* Enable SPI peripheral */
+      __HAL_SPI_ENABLE(hspi);
+    }
+
+    /* Enable Rx DMA Request */
+    hspi->Instance->CR2 |= SPI_CR2_RXDMAEN;
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Transmit and Receive an amount of data in no-blocking mode with DMA
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @param  pTxData: pointer to transmission data buffer
+  * @param  pRxData: pointer to reception data buffer
+  * @note  When the CRC feature is enabled the pRxData Length must be Size + 1
+  * @param  Size: amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size)
+{
+  uint32_t tmpstate = 0;
+  tmpstate = hspi->State;
+  if((tmpstate == HAL_SPI_STATE_READY) || ((hspi->Init.Mode == SPI_MODE_MASTER) && \
+     (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmpstate == HAL_SPI_STATE_BUSY_RX)))
+  {
+    if((pTxData == NULL ) || (pRxData == NULL ) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Check the parameters */
+    assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction));
+
+    /* Process locked */
+    __HAL_LOCK(hspi);
+
+    /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */
+    if(hspi->State != HAL_SPI_STATE_BUSY_RX)
+    {
+      hspi->State = HAL_SPI_STATE_BUSY_TX_RX;
+    }
+
+    /* Configure communication */
+    hspi->ErrorCode   = HAL_SPI_ERROR_NONE;
+
+    hspi->pTxBuffPtr  = (uint8_t*)pTxData;
+    hspi->TxXferSize  = Size;
+    hspi->TxXferCount = Size;
+
+    hspi->pRxBuffPtr  = (uint8_t*)pRxData;
+    hspi->RxXferSize  = Size;
+    hspi->RxXferCount = Size;
+
+    /*Init field not used in handle to zero */
+    hspi->RxISR = 0;
+    hspi->TxISR = 0;
+
+    /* Reset CRC Calculation */
+    if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      SPI_RESET_CRC(hspi);
+    }
+
+    /* Check if we are in Rx only or in Rx/Tx Mode and configure the DMA transfer complete callback */
+    if(hspi->State == HAL_SPI_STATE_BUSY_RX)
+    {
+      /* Set the SPI Rx DMA Half transfer complete callback */
+      hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfReceiveCplt;
+
+      hspi->hdmarx->XferCpltCallback = SPI_DMAReceiveCplt;
+    }
+    else
+    {
+      /* Set the SPI Tx/Rx DMA Half transfer complete callback */
+      hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfTransmitReceiveCplt;
+
+      hspi->hdmarx->XferCpltCallback = SPI_DMATransmitReceiveCplt;
+    }
+
+    /* Set the DMA error callback */
+    hspi->hdmarx->XferErrorCallback = SPI_DMAError;
+
+    /* Enable the Rx DMA Stream */
+    HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr, hspi->RxXferCount);
+
+    /* Enable Rx DMA Request */
+    hspi->Instance->CR2 |= SPI_CR2_RXDMAEN;
+
+    /* Set the SPI Tx DMA transfer complete callback as NULL because the communication closing
+    is performed in DMA reception complete callback  */
+    hspi->hdmatx->XferCpltCallback = NULL;
+
+    if(hspi->State == HAL_SPI_STATE_BUSY_TX_RX)
+    {
+      /* Set the DMA error callback */
+      hspi->hdmatx->XferErrorCallback = SPI_DMAError;
+    }
+    else
+    {
+      hspi->hdmatx->XferErrorCallback = NULL;
+    }
+
+    /* Enable the Tx DMA Stream */
+    HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR, hspi->TxXferCount);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hspi);
+
+    /* Check if the SPI is already enabled */
+    if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
+    {
+      /* Enable SPI peripheral */
+      __HAL_SPI_ENABLE(hspi);
+    }
+
+    /* Enable Tx DMA Request */
+    hspi->Instance->CR2 |= SPI_CR2_TXDMAEN;
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Pauses the DMA Transfer.
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for the specified SPI module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi)
+{
+  /* Process Locked */
+  __HAL_LOCK(hspi);
+
+  /* Disable the SPI DMA Tx & Rx requests */
+  hspi->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
+  hspi->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hspi);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief Resumes the DMA Transfer.
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for the specified SPI module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi)
+{
+  /* Process Locked */
+  __HAL_LOCK(hspi);
+
+  /* Enable the SPI DMA Tx & Rx requests */
+  hspi->Instance->CR2 |= SPI_CR2_TXDMAEN;
+  hspi->Instance->CR2 |= SPI_CR2_RXDMAEN;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hspi);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief Stops the DMA Transfer.
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for the specified SPI module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi)
+{
+  /* The Lock is not implemented on this API to allow the user application
+     to call the HAL SPI API under callbacks HAL_SPI_TxCpltCallback() or HAL_SPI_RxCpltCallback() or HAL_SPI_TxRxCpltCallback():
+     when calling HAL_DMA_Abort() API the DMA TX/RX Transfer complete interrupt is generated
+     and the correspond call back is executed HAL_SPI_TxCpltCallback() or HAL_SPI_RxCpltCallback() or HAL_SPI_TxRxCpltCallback()
+     */
+
+  /* Abort the SPI DMA tx Stream */
+  if(hspi->hdmatx != NULL)
+  {
+    HAL_DMA_Abort(hspi->hdmatx);
+  }
+  /* Abort the SPI DMA rx Stream */
+  if(hspi->hdmarx != NULL)
+  {
+    HAL_DMA_Abort(hspi->hdmarx);
+  }
+
+  /* Disable the SPI DMA Tx & Rx requests */
+  hspi->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
+  hspi->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
+
+  hspi->State = HAL_SPI_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  This function handles SPI interrupt request.
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @retval HAL status
+  */
+void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi)
+{
+  uint32_t tmp1 = 0, tmp2 = 0, tmp3 = 0;
+
+  tmp1 = __HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE);
+  tmp2 = __HAL_SPI_GET_IT_SOURCE(hspi, SPI_IT_RXNE);
+  tmp3 = __HAL_SPI_GET_FLAG(hspi, SPI_FLAG_OVR);
+  /* SPI in mode Receiver and Overrun not occurred ---------------------------*/
+  if((tmp1 != RESET) && (tmp2 != RESET) && (tmp3 == RESET))
+  {
+    hspi->RxISR(hspi);
+    return;
+  }
+
+  tmp1 = __HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE);
+  tmp2 = __HAL_SPI_GET_IT_SOURCE(hspi, SPI_IT_TXE);
+  /* SPI in mode Transmitter ---------------------------------------------------*/
+  if((tmp1 != RESET) && (tmp2 != RESET))
+  {
+    hspi->TxISR(hspi);
+    return;
+  }
+
+  if(__HAL_SPI_GET_IT_SOURCE(hspi, SPI_IT_ERR) != RESET)
+  {
+    /* SPI CRC error interrupt occurred ---------------------------------------*/
+    if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET)
+    {
+      hspi->ErrorCode |= HAL_SPI_ERROR_CRC;
+      __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+    }
+    /* SPI Mode Fault error interrupt occurred --------------------------------*/
+    if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_MODF) != RESET)
+    {
+      hspi->ErrorCode |= HAL_SPI_ERROR_MODF;
+      __HAL_SPI_CLEAR_MODFFLAG(hspi);
+    }
+
+    /* SPI Overrun error interrupt occurred -----------------------------------*/
+    if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_OVR) != RESET)
+    {
+      if(hspi->State != HAL_SPI_STATE_BUSY_TX)
+      {
+        hspi->ErrorCode |= HAL_SPI_ERROR_OVR;
+        __HAL_SPI_CLEAR_OVRFLAG(hspi);
+      }
+    }
+
+    /* SPI Frame error interrupt occurred -------------------------------------*/
+    if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_FRE) != RESET)
+    {
+      hspi->ErrorCode |= HAL_SPI_ERROR_FRE;
+      __HAL_SPI_CLEAR_FREFLAG(hspi);
+    }
+
+    /* Call the Error call Back in case of Errors */
+    if(hspi->ErrorCode!=HAL_SPI_ERROR_NONE)
+    {
+      hspi->State = HAL_SPI_STATE_READY;
+      HAL_SPI_ErrorCallback(hspi);
+    }
+  }
+}
+
+/**
+  * @brief Tx Transfer completed callbacks
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @retval None
+  */
+__weak void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SPI_TxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief Rx Transfer completed callbacks
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @retval None
+  */
+__weak void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SPI_RxCpltCallback() could be implemented in the user file
+   */
+}
+
+/**
+  * @brief Tx and Rx Transfer completed callbacks
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @retval None
+  */
+__weak void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SPI_TxRxCpltCallback() could be implemented in the user file
+   */
+}
+
+/**
+  * @brief Tx Half Transfer completed callbacks
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @retval None
+  */
+__weak void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SPI_TxHalfCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief Rx Half Transfer completed callbacks
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @retval None
+  */
+__weak void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SPI_RxHalfCpltCallback() could be implemented in the user file
+   */
+}
+
+/**
+  * @brief Tx and Rx Transfer completed callbacks
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @retval None
+  */
+__weak void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SPI_TxRxHalfCpltCallback() could be implemented in the user file
+   */
+}
+
+/**
+  * @brief SPI error callbacks
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @retval None
+  */
+ __weak void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi)
+{
+  /* NOTE : - This function Should not be modified, when the callback is needed,
+            the HAL_SPI_ErrorCallback() could be implemented in the user file.
+            - The ErrorCode parameter in the hspi handle is updated by the SPI processes
+            and user can use HAL_SPI_GetError() API to check the latest error occurred.
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup SPI_Exported_Functions_Group3 Peripheral State and Errors functions
+  *  @brief   SPI control functions
+  *
+@verbatim
+ ===============================================================================
+                      ##### Peripheral State and Errors functions #####
+ ===============================================================================
+    [..]
+    This subsection provides a set of functions allowing to control the SPI.
+     (+) HAL_SPI_GetState() API can be helpful to check in run-time the state of the SPI peripheral
+     (+) HAL_SPI_GetError() check in run-time Errors occurring during communication
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Return the SPI state
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @retval HAL state
+  */
+HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi)
+{
+  return hspi->State;
+}
+
+/**
+  * @brief  Return the SPI error code
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @retval SPI Error Code
+  */
+uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi)
+{
+  return hspi->ErrorCode;
+}
+
+/**
+  * @}
+  */
+
+  /**
+  * @brief  Interrupt Handler to close Tx transfer
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @retval void
+  */
+static void SPI_TxCloseIRQHandler(SPI_HandleTypeDef *hspi)
+{
+  /* Wait until TXE flag is set to send data */
+  if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, SPI_TIMEOUT_VALUE) != HAL_OK)
+  {
+    hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
+  }
+
+  /* Disable TXE interrupt */
+  __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE ));
+
+  /* Disable ERR interrupt if Receive process is finished */
+  if(__HAL_SPI_GET_IT_SOURCE(hspi, SPI_IT_RXNE) == RESET)
+  {
+    __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_ERR));
+
+    /* Wait until Busy flag is reset before disabling SPI */
+    if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_BSY, SET, SPI_TIMEOUT_VALUE) != HAL_OK)
+    {
+      hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
+    }
+
+    /* Clear OVERRUN flag in 2 Lines communication mode because received is not read */
+    if(hspi->Init.Direction == SPI_DIRECTION_2LINES)
+    {
+      __HAL_SPI_CLEAR_OVRFLAG(hspi);
+    }
+
+    /* Check if Errors has been detected during transfer */
+    if(hspi->ErrorCode ==  HAL_SPI_ERROR_NONE)
+    {
+      /* Check if we are in Tx or in Rx/Tx Mode */
+      if(hspi->State == HAL_SPI_STATE_BUSY_TX_RX)
+      {
+        /* Set state to READY before run the Callback Complete */
+        hspi->State = HAL_SPI_STATE_READY;
+        HAL_SPI_TxRxCpltCallback(hspi);
+      }
+      else
+      {
+        /* Set state to READY before run the Callback Complete */
+        hspi->State = HAL_SPI_STATE_READY;
+        HAL_SPI_TxCpltCallback(hspi);
+      }
+    }
+    else
+    {
+      /* Set state to READY before run the Callback Complete */
+      hspi->State = HAL_SPI_STATE_READY;
+      /* Call Error call back in case of Error */
+      HAL_SPI_ErrorCallback(hspi);
+    }
+  }
+}
+
+/**
+  * @brief  Interrupt Handler to transmit amount of data in no-blocking mode
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @retval void
+  */
+static void SPI_TxISR(SPI_HandleTypeDef *hspi)
+{
+  /* Transmit data in 8 Bit mode */
+  if(hspi->Init.DataSize == SPI_DATASIZE_8BIT)
+  {
+    hspi->Instance->DR = (*hspi->pTxBuffPtr++);
+  }
+  /* Transmit data in 16 Bit mode */
+  else
+  {
+    hspi->Instance->DR = *((uint16_t*)hspi->pTxBuffPtr);
+    hspi->pTxBuffPtr+=2;
+  }
+  hspi->TxXferCount--;
+
+  if(hspi->TxXferCount == 0)
+  {
+    if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      /* calculate and transfer CRC on Tx line */
+      hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
+    }
+    SPI_TxCloseIRQHandler(hspi);
+  }
+}
+
+/**
+  * @brief  Interrupt Handler to close Rx transfer
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @retval void
+  */
+static void SPI_RxCloseIRQHandler(SPI_HandleTypeDef *hspi)
+{
+  __IO uint16_t tmpreg;
+
+  if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+  {
+    /* Wait until RXNE flag is set to send data */
+    if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, SPI_TIMEOUT_VALUE) != HAL_OK)
+    {
+      hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
+    }
+
+    /* Read CRC to reset RXNE flag */
+    tmpreg = hspi->Instance->DR;
+    UNUSED(tmpreg);
+
+    /* Wait until RXNE flag is set to send data */
+    if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, SET, SPI_TIMEOUT_VALUE) != HAL_OK)
+    {
+      hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
+    }
+
+    /* Check if CRC error occurred */
+    if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET)
+    {
+      hspi->ErrorCode |= HAL_SPI_ERROR_CRC;
+
+      /* Reset CRC Calculation */
+      SPI_RESET_CRC(hspi);
+    }
+  }
+
+  /* Disable RXNE and ERR interrupt */
+  __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE));
+
+  /* if Transmit process is finished */
+  if(__HAL_SPI_GET_IT_SOURCE(hspi, SPI_IT_TXE) == RESET)
+  {
+    /* Disable ERR interrupt */
+    __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_ERR));
+
+    if((hspi->Init.Mode == SPI_MODE_MASTER)&&((hspi->Init.Direction == SPI_DIRECTION_1LINE)||(hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY)))
+    {
+      /* Disable SPI peripheral */
+      __HAL_SPI_DISABLE(hspi);
+    }
+
+    /* Check if Errors has been detected during transfer */
+    if(hspi->ErrorCode ==  HAL_SPI_ERROR_NONE)
+    {
+      /* Check if we are in Rx or in Rx/Tx Mode */
+      if(hspi->State == HAL_SPI_STATE_BUSY_TX_RX)
+      {
+        /* Set state to READY before run the Callback Complete */
+        hspi->State = HAL_SPI_STATE_READY;
+        HAL_SPI_TxRxCpltCallback(hspi);
+      }
+      else
+      {
+        /* Set state to READY before run the Callback Complete */
+        hspi->State = HAL_SPI_STATE_READY;
+        HAL_SPI_RxCpltCallback(hspi);
+      }
+    }
+    else
+    {
+      /* Set state to READY before run the Callback Complete */
+      hspi->State = HAL_SPI_STATE_READY;
+      /* Call Error call back in case of Error */
+      HAL_SPI_ErrorCallback(hspi);
+    }
+  }
+}
+
+/**
+  * @brief  Interrupt Handler to receive amount of data in 2Lines mode
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @retval void
+  */
+static void SPI_2LinesRxISR(SPI_HandleTypeDef *hspi)
+{
+  /* Receive data in 8 Bit mode */
+  if(hspi->Init.DataSize == SPI_DATASIZE_8BIT)
+  {
+    (*hspi->pRxBuffPtr++) = hspi->Instance->DR;
+  }
+  /* Receive data in 16 Bit mode */
+  else
+  {
+    *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR;
+    hspi->pRxBuffPtr+=2;
+  }
+  hspi->RxXferCount--;
+
+  if(hspi->RxXferCount==0)
+  {
+    SPI_RxCloseIRQHandler(hspi);
+  }
+}
+
+/**
+  * @brief  Interrupt Handler to receive amount of data in no-blocking mode
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @retval void
+  */
+static void SPI_RxISR(SPI_HandleTypeDef *hspi)
+{
+  /* Receive data in 8 Bit mode */
+  if(hspi->Init.DataSize == SPI_DATASIZE_8BIT)
+  {
+    (*hspi->pRxBuffPtr++) = hspi->Instance->DR;
+  }
+  /* Receive data in 16 Bit mode */
+  else
+  {
+    *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR;
+    hspi->pRxBuffPtr+=2;
+  }
+    hspi->RxXferCount--;
+
+  /* Enable CRC Transmission */
+  if((hspi->RxXferCount == 1) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE))
+  {
+    /* Set CRC Next to calculate CRC on Rx side */
+    hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
+  }
+
+  if(hspi->RxXferCount == 0)
+  {
+    SPI_RxCloseIRQHandler(hspi);
+  }
+}
+
+/**
+  * @brief DMA SPI transmit process complete callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SPI_DMATransmitCplt(DMA_HandleTypeDef *hdma)
+{
+  SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  /* DMA Normal Mode */
+  if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
+  {
+    /* Wait until TXE flag is set to send data */
+    if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, SPI_TIMEOUT_VALUE) != HAL_OK)
+    {
+      hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
+    }
+    /* Disable Tx DMA Request */
+    hspi->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
+
+    /* Wait until Busy flag is reset before disabling SPI */
+    if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_BSY, SET, SPI_TIMEOUT_VALUE) != HAL_OK)
+    {
+      hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
+    }
+
+    hspi->TxXferCount = 0;
+
+    hspi->State = HAL_SPI_STATE_READY;
+  }
+
+  /* Clear OVERRUN flag in 2 Lines communication mode because received is not read */
+  if(hspi->Init.Direction == SPI_DIRECTION_2LINES)
+  {
+   __HAL_SPI_CLEAR_OVRFLAG(hspi);
+  }
+
+  /* Check if Errors has been detected during transfer */
+  if(hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+  {
+    HAL_SPI_ErrorCallback(hspi);
+  }
+  else
+  {
+    HAL_SPI_TxCpltCallback(hspi);
+  }
+}
+
+/**
+  * @brief DMA SPI receive process complete callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SPI_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+  __IO uint16_t tmpreg;
+
+  SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  /* DMA Normal mode */
+  if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
+  {
+    if((hspi->Init.Direction == SPI_DIRECTION_2LINES)&&(hspi->Init.Mode == SPI_MODE_MASTER))
+    {
+       SPI_DMAEndTransmitReceive(hspi);
+    }
+    /* SPI_DIRECTION_1LINE or SPI_DIRECTION_2LINES_RXONLY */
+    else
+    {
+      if((hspi->Init.Mode == SPI_MODE_MASTER)&&((hspi->Init.Direction == SPI_DIRECTION_1LINE)||(hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY)))
+      {
+        /* Disable SPI peripheral */
+        __HAL_SPI_DISABLE(hspi);
+      }
+
+      /* Disable Rx DMA Request */
+      hspi->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
+
+      hspi->RxXferCount = 0;
+
+      /* Reset CRC Calculation */
+      if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+      {
+        /* Wait until RXNE flag is set to send data */
+        if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, SPI_TIMEOUT_VALUE) != HAL_OK)
+        {
+          hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
+        }
+
+        /* Read CRC */
+        tmpreg = hspi->Instance->DR;
+        UNUSED(tmpreg);
+
+        /* Wait until RXNE flag is set */
+        if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, SET, SPI_TIMEOUT_VALUE) != HAL_OK)
+        {
+          hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
+        }
+
+        /* Check if CRC error occurred */
+        if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET)
+        {
+          hspi->ErrorCode |= HAL_SPI_ERROR_CRC;
+          __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+        }
+      }
+    }
+
+    hspi->State = HAL_SPI_STATE_READY;
+
+    /* Check if Errors has been detected during transfer */
+    if(hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+    {
+      HAL_SPI_ErrorCallback(hspi);
+    }
+    else
+    {
+      HAL_SPI_RxCpltCallback(hspi);
+    }
+  }
+  else
+  {
+    HAL_SPI_RxCpltCallback(hspi);
+  }
+}
+
+/**
+  * @brief End DMA SPI transmit receive process
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @retval None
+  */
+static void SPI_DMAEndTransmitReceive(SPI_HandleTypeDef *hspi)
+{
+  __IO uint16_t tmpreg;
+
+  /* Reset CRC Calculation */
+  if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+  {
+    /* Check if CRC is done on going (RXNE flag set) */
+    if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, SET, SPI_TIMEOUT_VALUE) == HAL_OK)
+    {
+      /* Wait until RXNE flag is set to send data */
+      if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, SPI_TIMEOUT_VALUE) != HAL_OK)
+      {
+        hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
+      }
+    }
+    /* Read CRC */
+    tmpreg = hspi->Instance->DR;
+    UNUSED(tmpreg);
+
+    /* Check if CRC error occurred */
+    if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET)
+    {
+      hspi->ErrorCode |= HAL_SPI_ERROR_CRC;
+      __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+    }
+  }
+
+  /* Wait until TXE flag is set to send data */
+  if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, SPI_TIMEOUT_VALUE) != HAL_OK)
+  {
+    hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
+  }
+  /* Disable Tx DMA Request */
+  hspi->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
+
+  /* Wait until Busy flag is reset before disabling SPI */
+  if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_BSY, SET, SPI_TIMEOUT_VALUE) != HAL_OK)
+  {
+    hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
+  }
+
+  /* Disable Rx DMA Request */
+  hspi->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
+
+  hspi->TxXferCount = 0;
+  hspi->RxXferCount = 0;
+}
+
+/**
+  * @brief DMA SPI transmit receive process complete callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *               the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+  SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
+  { /**/
+    SPI_DMAEndTransmitReceive(hspi);
+
+    hspi->State = HAL_SPI_STATE_READY;
+
+    /* Check if Errors has been detected during transfer */
+    if(hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+    {
+      HAL_SPI_ErrorCallback(hspi);
+    }
+    else
+    {
+      HAL_SPI_TxRxCpltCallback(hspi);
+    }
+  }
+  else
+  {
+    HAL_SPI_TxRxCpltCallback(hspi);
+  }
+}
+
+/**
+  * @brief DMA SPI half transmit process complete callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SPI_DMAHalfTransmitCplt(DMA_HandleTypeDef *hdma)
+{
+  SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  HAL_SPI_TxHalfCpltCallback(hspi);
+}
+
+/**
+  * @brief DMA SPI half receive process complete callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SPI_DMAHalfReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+  SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  HAL_SPI_RxHalfCpltCallback(hspi);
+}
+
+/**
+  * @brief DMA SPI Half transmit receive process complete callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SPI_DMAHalfTransmitReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+  SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  HAL_SPI_TxRxHalfCpltCallback(hspi);
+}
+
+/**
+  * @brief DMA SPI communication error callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SPI_DMAError(DMA_HandleTypeDef *hdma)
+{
+  SPI_HandleTypeDef* hspi = (SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  hspi->TxXferCount = 0;
+  hspi->RxXferCount = 0;
+  hspi->State= HAL_SPI_STATE_READY;
+  hspi->ErrorCode |= HAL_SPI_ERROR_DMA;
+  HAL_SPI_ErrorCallback(hspi);
+}
+
+/**
+  * @brief This function handles SPI Communication Timeout.
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *                the configuration information for SPI module.
+  * @param  Flag: SPI flag to check
+  * @param  Status: Flag status to check: RESET or set
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef SPI_WaitOnFlagUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Flag, FlagStatus Status, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait until flag is set */
+  if(Status == RESET)
+  {
+    while(__HAL_SPI_GET_FLAG(hspi, Flag) == RESET)
+    {
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Disable the SPI and reset the CRC: the CRC value should be cleared
+             on both master and slave sides in order to resynchronize the master
+             and slave for their respective CRC calculation */
+
+          /* Disable TXE, RXNE and ERR interrupts for the interrupt process */
+          __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR));
+
+          /* Disable SPI peripheral */
+          __HAL_SPI_DISABLE(hspi);
+
+          /* Reset CRC Calculation */
+          if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+          {
+            SPI_RESET_CRC(hspi);
+          }
+
+          hspi->State= HAL_SPI_STATE_READY;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hspi);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  else
+  {
+    while(__HAL_SPI_GET_FLAG(hspi, Flag) != RESET)
+    {
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Disable the SPI and reset the CRC: the CRC value should be cleared
+             on both master and slave sides in order to resynchronize the master
+             and slave for their respective CRC calculation */
+
+          /* Disable TXE, RXNE and ERR interrupts for the interrupt process */
+          __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR));
+
+          /* Disable SPI peripheral */
+          __HAL_SPI_DISABLE(hspi);
+
+          /* Reset CRC Calculation */
+          if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+          {
+            SPI_RESET_CRC(hspi);
+          }
+
+          hspi->State= HAL_SPI_STATE_READY;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hspi);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  return HAL_OK;
+}
+
+
+/**
+  * @}
+  */
+
+#endif /* HAL_SPI_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/