Based on user/ft/stm32-dev-bridge, without the project-specific build

directories (and duplicated code).

1 files changed, 1676 insertions, 0 deletions

diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c
new file mode 100644
index 0000000..37df30e
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c
@@ -0,0 +1,1676 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_rcc_ex.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Extension RCC HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities RCC extension peripheral:
+  *           + Extended Peripheral Control functions
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup RCCEx RCCEx
+  * @brief RCCEx HAL module driver
+  * @{
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup RCCEx_Private_Constants
+  * @{
+  */
+/**
+  * @}
+  */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Functions RCCEx Exported Functions
+  *  @{
+  */
+
+/** @defgroup RCCEx_Exported_Functions_Group1 Extended Peripheral Control functions
+ *  @brief  Extended Peripheral Control functions
+ *
+@verbatim
+ ===============================================================================
+                ##### Extended Peripheral Control functions  #####
+ ===============================================================================
+    [..]
+    This subsection provides a set of functions allowing to control the RCC Clocks
+    frequencies.
+    [..]
+    (@) Important note: Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to
+        select the RTC clock source; in this case the Backup domain will be reset in
+        order to modify the RTC Clock source, as consequence RTC registers (including
+        the backup registers) and RCC_BDCR register are set to their reset values.
+
+@endverbatim
+  * @{
+  */
+#if defined(STM32F446xx)
+/**
+  * @brief  Initializes the RCC extended peripherals clocks according to the specified
+  *         parameters in the RCC_PeriphCLKInitTypeDef.
+  * @param  PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
+  *         contains the configuration information for the Extended Peripherals
+  *         clocks(I2S, SAI, LTDC RTC and TIM).
+  *
+  * @note   Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select
+  *         the RTC clock source; in this case the Backup domain will be reset in
+  *         order to modify the RTC Clock source, as consequence RTC registers (including
+  *         the backup registers) and RCC_BDCR register are set to their reset values.
+  *
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef  *PeriphClkInit)
+{
+  uint32_t tickstart = 0;
+  uint32_t tmpreg1 = 0;
+  uint32_t plli2sp = 0;
+  uint32_t plli2sq = 0;
+  uint32_t plli2sr = 0;
+  uint32_t pllsaip = 0;
+  uint32_t pllsaiq = 0;
+  uint32_t plli2sused = 0;
+  uint32_t pllsaiused = 0;
+
+  /* Check the peripheral clock selection parameters */
+  assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection));
+
+  /*----------------------------------- I2S APB1 configuration ----------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB1) == (RCC_PERIPHCLK_I2S_APB1))
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_I2SAPB1CLKSOURCE(PeriphClkInit->I2sApb1ClockSelection));
+
+    /* Configure I2S Clock source */
+    __HAL_RCC_I2S_APB1_CONFIG(PeriphClkInit->I2sApb1ClockSelection);
+    /* Enable the PLLI2S when it's used as clock source for I2S */
+    if(PeriphClkInit->I2sApb1ClockSelection == RCC_I2SAPB1CLKSOURCE_PLLI2S)
+    {
+      plli2sused = 1;
+    }
+  }
+
+  /*----------------------------------- I2S APB2 configuration -----------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB2) == (RCC_PERIPHCLK_I2S_APB2))
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_I2SAPB2CLKSOURCE(PeriphClkInit->I2sApb2ClockSelection));
+
+    /* Configure I2S Clock source */
+    __HAL_RCC_I2S_APB2_CONFIG(PeriphClkInit->I2sApb2ClockSelection);
+    /* Enable the PLLI2S when it's used as clock source for I2S */
+    if(PeriphClkInit->I2sApb2ClockSelection == RCC_I2SAPB2CLKSOURCE_PLLI2S)
+    {
+      plli2sused = 1;
+    }
+  }
+
+  /*------------------------------------ SAI1 configuration --------------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == (RCC_PERIPHCLK_SAI1))
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_SAI1CLKSOURCE(PeriphClkInit->Sai1ClockSelection));
+
+    /* Configure SAI1 Clock source */
+    __HAL_RCC_SAI1_CONFIG(PeriphClkInit->Sai1ClockSelection);
+    /* Enable the PLLI2S when it's used as clock source for SAI */
+    if(PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLI2S)
+    {
+      plli2sused = 1;
+    }
+    /* Enable the PLLSAI when it's used as clock source for SAI */
+    if(PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLSAI)
+    {
+      pllsaiused = 1;
+    }
+  }
+
+  /*------------------------------------ SAI2 configuration --------------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == (RCC_PERIPHCLK_SAI2))
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_SAI2CLKSOURCE(PeriphClkInit->Sai2ClockSelection));
+
+    /* Configure SAI2 Clock source */
+    __HAL_RCC_SAI2_CONFIG(PeriphClkInit->Sai2ClockSelection);
+
+    /* Enable the PLLI2S when it's used as clock source for SAI */
+    if(PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLI2S)
+    {
+      plli2sused = 1;
+    }
+    /* Enable the PLLSAI when it's used as clock source for SAI */
+    if(PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLSAI)
+    {
+      pllsaiused = 1;
+    }
+  }
+
+  /*------------------------------------ RTC configuration --------------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC))
+  {
+    /* Enable Power Clock*/
+    __HAL_RCC_PWR_CLK_ENABLE();
+
+    /* Enable write access to Backup domain */
+    PWR->CR |= PWR_CR_DBP;
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    while((PWR->CR & PWR_CR_DBP) == RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE)
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+    /* Reset the Backup domain only if the RTC Clock source selction is modified */
+    if((RCC->BDCR & RCC_BDCR_RTCSEL) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))
+    {
+      /* Store the content of BDCR register before the reset of Backup Domain */
+      tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL));
+      /* RTC Clock selection can be changed only if the Backup Domain is reset */
+      __HAL_RCC_BACKUPRESET_FORCE();
+      __HAL_RCC_BACKUPRESET_RELEASE();
+      /* Restore the Content of BDCR register */
+      RCC->BDCR = tmpreg1;
+
+      /* Wait for LSERDY if LSE was enabled */
+      if(HAL_IS_BIT_SET(tmpreg1, RCC_BDCR_LSERDY))
+      {
+        /* Get tick */
+        tickstart = HAL_GetTick();
+
+        /* Wait till LSE is ready */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+      __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection);
+    }
+  }
+
+  /*------------------------------------ TIM configuration --------------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM))
+  {
+    /* Configure Timer Prescaler */
+    __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection);
+  }
+
+  /*------------------------------------- FMPI2C1 Configuration ----------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_FMPI2C1) == RCC_PERIPHCLK_FMPI2C1)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_FMPI2C1CLKSOURCE(PeriphClkInit->Fmpi2c1ClockSelection));
+
+    /* Configure the FMPI2C1 clock source */
+    __HAL_RCC_FMPI2C1_CONFIG(PeriphClkInit->Fmpi2c1ClockSelection);
+  }
+
+  /*--------------------------------------- CEC Configuration -----------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_CECCLKSOURCE(PeriphClkInit->CecClockSelection));
+
+    /* Configure the CEC clock source */
+    __HAL_RCC_CEC_CONFIG(PeriphClkInit->CecClockSelection);
+  }
+
+  /*-------------------------------------- CK48 Configuration -----------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CK48) == RCC_PERIPHCLK_CK48)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_CK48CLKSOURCE(PeriphClkInit->Clk48ClockSelection));
+
+    /* Configure the SDIO clock source */
+    __HAL_RCC_CLK48_CONFIG(PeriphClkInit->Clk48ClockSelection);
+
+    /* Enable the PLLSAI when it's used as clock source for CK48 */
+    if(PeriphClkInit->Clk48ClockSelection == RCC_CK48CLKSOURCE_PLLSAIP)
+    {
+      pllsaiused = 1;
+    }
+  }
+
+  /*------------------------------------- SDIO Configuration ------------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDIO) == RCC_PERIPHCLK_SDIO)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_SDIOCLKSOURCE(PeriphClkInit->SdioClockSelection));
+
+    /* Configure the SDIO clock source */
+    __HAL_RCC_SDIO_CONFIG(PeriphClkInit->SdioClockSelection);
+  }
+
+  /*------------------------------------- SPDIFRX Configuration --------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_SPDIFRXCLKSOURCE(PeriphClkInit->SpdifClockSelection));
+
+    /* Configure the SPDIFRX clock source */
+    __HAL_RCC_SPDIFRX_CONFIG(PeriphClkInit->SpdifClockSelection);
+    /* Enable the PLLI2S when it's used as clock source for SPDIFRX */
+    if(PeriphClkInit->SpdifClockSelection == RCC_SPDIFRXCLKSOURCE_PLLI2SP)
+    {
+      plli2sused = 1;
+    }
+  }
+
+  /*-------------------------------------- PLLI2S Configuration --------------*/
+  /* PLLI2S is configured when a peripheral will use it as source clock : SAI1, SAI2, I2S on APB1,
+     I2S on APB2 or SPDIFRX */
+  if((plli2sused == 1) || (PeriphClkInit->PeriphClockSelection == RCC_PERIPHCLK_PLLI2S))
+  {
+    /* Disable the PLLI2S */
+    __HAL_RCC_PLLI2S_DISABLE();
+    /* Get tick */
+    tickstart = HAL_GetTick();
+    /* Wait till PLLI2S is disabled */
+    while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY)  != RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
+      {
+        /* return in case of Timeout detected */
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* check for common PLLI2S Parameters */
+    assert_param(IS_RCC_PLLI2SM_VALUE(PeriphClkInit->PLLI2S.PLLI2SM));
+    assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN));
+
+    /*----------------- In Case of PLLI2S is selected as source clock for I2S -------------------*/
+    if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB1) == RCC_PERIPHCLK_I2S_APB1) && (PeriphClkInit->I2sApb1ClockSelection == RCC_I2SAPB1CLKSOURCE_PLLI2S)) ||
+       ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB2) == RCC_PERIPHCLK_I2S_APB2) && (PeriphClkInit->I2sApb2ClockSelection == RCC_I2SAPB2CLKSOURCE_PLLI2S)))
+    {
+      /* check for Parameters */
+      assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR));
+
+      /* Read PLLI2SP/PLLI2SQ value from PLLI2SCFGR register (this value is not needed for I2S configuration) */
+      plli2sp = ((((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SP)) + 1) << 1);
+      plli2sq = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SQ));
+      /* Configure the PLLI2S division factors */
+      /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) × (PLLI2SN/PLLI2SM) */
+      /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */
+      __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , plli2sp, plli2sq, PeriphClkInit->PLLI2S.PLLI2SR);
+    }
+
+    /*----------------- In Case of PLLI2S is selected as source clock for SAI -------------------*/
+    if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) && (PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLI2S)) ||
+       ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) && (PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLI2S)))
+    {
+      /* Check for PLLI2S Parameters */
+      assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ));
+      /* Check for PLLI2S/DIVQ parameters */
+      assert_param(IS_RCC_PLLI2S_DIVQ_VALUE(PeriphClkInit->PLLI2SDivQ));
+
+      /* Read PLLI2SP/PLLI2SR value from PLLI2SCFGR register (this value is not needed for SAI configuration) */
+      plli2sp = ((((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SP)) + 1) << 1);
+      plli2sr = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR));
+      /* Configure the PLLI2S division factors */
+      /* PLLI2S_VCO Input  = PLL_SOURCE/PLLI2SM */
+      /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
+      /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */
+      __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , plli2sp, PeriphClkInit->PLLI2S.PLLI2SQ, plli2sr);
+
+      /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */
+      __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLI2SDivQ);
+    }
+
+    /*----------------- In Case of PLLI2S is selected as source clock for SPDIFRX -------------------*/
+    if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX) && (PeriphClkInit->SpdifClockSelection == RCC_SPDIFRXCLKSOURCE_PLLI2SP))
+    {
+      /* check for Parameters */
+      assert_param(IS_RCC_PLLI2SP_VALUE(PeriphClkInit->PLLI2S.PLLI2SP));
+      /* Read PLLI2SR value from PLLI2SCFGR register (this value is not need for SAI configuration) */
+      plli2sq = ((((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SP)) + 1) << 1);
+      plli2sr = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR));
+      /* Configure the PLLI2S division factors */
+      /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) × (PLLI2SN/PLLI2SM) */
+      /* SPDIFRXCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SP */
+      __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SP, plli2sq, plli2sr);
+    }
+
+     /*----------------- In Case of PLLI2S is just selected  -----------------*/
+    if((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S)
+    {
+      /* Check for Parameters */
+      assert_param(IS_RCC_PLLI2SP_VALUE(PeriphClkInit->PLLI2S.PLLI2SP));
+      assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR));
+      assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ));
+
+      /* Configure the PLLI2S division factors */
+      /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) × (PLLI2SN/PLLI2SM) */
+      __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SP, PeriphClkInit->PLLI2S.PLLI2SQ, PeriphClkInit->PLLI2S.PLLI2SR);
+    }
+
+    /* Enable the PLLI2S */
+    __HAL_RCC_PLLI2S_ENABLE();
+    /* Get tick */
+    tickstart = HAL_GetTick();
+    /* Wait till PLLI2S is ready */
+    while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY)  == RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
+      {
+        /* return in case of Timeout detected */
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  /*-------------------------------------- PLLSAI Configuration ---------------------------------*/
+  /* PLLSAI is configured when a peripheral will use it as source clock : SAI1, SAI2, CK48 or SDIO */
+  if(pllsaiused == 1)
+  {
+    /* Disable PLLSAI Clock */
+    __HAL_RCC_PLLSAI_DISABLE();
+    /* Get tick */
+    tickstart = HAL_GetTick();
+    /* Wait till PLLSAI is disabled */
+    while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE)
+      {
+        /* return in case of Timeout detected */
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Check the PLLSAI division factors */
+    assert_param(IS_RCC_PLLSAIM_VALUE(PeriphClkInit->PLLSAI.PLLSAIM));
+    assert_param(IS_RCC_PLLSAIN_VALUE(PeriphClkInit->PLLSAI.PLLSAIN));
+
+    /*----------------- In Case of PLLSAI is selected as source clock for SAI -------------------*/
+    if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) && (PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLSAI)) ||
+       ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) && (PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLSAI)))
+    {
+      /* check for PLLSAIQ Parameter */
+      assert_param(IS_RCC_PLLSAIQ_VALUE(PeriphClkInit->PLLSAI.PLLSAIQ));
+      /* check for PLLSAI/DIVQ Parameter */
+      assert_param(IS_RCC_PLLSAI_DIVQ_VALUE(PeriphClkInit->PLLSAIDivQ));
+
+      /* Read PLLSAIP value from PLLSAICFGR register (this value is not needed for SAI configuration) */
+      pllsaip = ((((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIP)) + 1) << 1);
+      /* PLLSAI_VCO Input  = PLL_SOURCE/PLLM */
+      /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
+      /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */
+      __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIM, PeriphClkInit->PLLSAI.PLLSAIN , pllsaip, PeriphClkInit->PLLSAI.PLLSAIQ, 0);
+
+      /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */
+      __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLSAIDivQ);
+    }
+
+    /*----------------- In Case of PLLSAI is selected as source clock for CK48 -------------------*/
+    /* In Case of PLLI2S is selected as source clock for CK48 */
+    if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CK48) == RCC_PERIPHCLK_CK48) && (PeriphClkInit->Clk48ClockSelection == RCC_CK48CLKSOURCE_PLLSAIP))
+    {
+      /* check for Parameters */
+      assert_param(IS_RCC_PLLSAIP_VALUE(PeriphClkInit->PLLSAI.PLLSAIP));
+      /* Read PLLSAIQ value from PLLI2SCFGR register (this value is not need for SAI configuration) */
+      pllsaiq = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ));
+      /* Configure the PLLSAI division factors */
+      /* PLLSAI_VCO = f(VCO clock) = f(PLLSAI clock input) × (PLLI2SN/PLLSAIM) */
+      /* 48CLK = f(PLLSAI clock output) = f(VCO clock) / PLLSAIP */
+      __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIM, PeriphClkInit->PLLSAI.PLLSAIN , PeriphClkInit->PLLSAI.PLLSAIP, pllsaiq, 0);
+    }
+
+    /* Enable PLLSAI Clock */
+    __HAL_RCC_PLLSAI_ENABLE();
+    /* Get tick */
+    tickstart = HAL_GetTick();
+    /* Wait till PLLSAI is ready */
+    while(__HAL_RCC_PLLSAI_GET_FLAG() == RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE)
+      {
+        /* return in case of Timeout detected */
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  Get the RCC_PeriphCLKInitTypeDef according to the internal
+  *         RCC configuration registers.
+  * @param  PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
+  *         will be configured.
+  * @retval None
+  */
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef  *PeriphClkInit)
+{
+  uint32_t tempreg;
+
+  /* Set all possible values for the extended clock type parameter------------*/
+  PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S_APB1 | RCC_PERIPHCLK_I2S_APB2 |\
+                                        RCC_PERIPHCLK_SAI1     | RCC_PERIPHCLK_SAI2     |\
+                                        RCC_PERIPHCLK_TIM      | RCC_PERIPHCLK_RTC      |\
+                                        RCC_PERIPHCLK_CEC      | RCC_PERIPHCLK_FMPI2C1  |\
+                                        RCC_PERIPHCLK_CK48     | RCC_PERIPHCLK_SDIO     |\
+                                        RCC_PERIPHCLK_SPDIFRX;
+
+  /* Get the PLLI2S Clock configuration -----------------------------------------------*/
+  PeriphClkInit->PLLI2S.PLLI2SM = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SM));
+  PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN));
+  PeriphClkInit->PLLI2S.PLLI2SP = (uint32_t)((((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SP)) + 1) << 1);
+  PeriphClkInit->PLLI2S.PLLI2SQ = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SQ));
+  PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR));
+  /* Get the PLLSAI Clock configuration -----------------------------------------------*/
+  PeriphClkInit->PLLSAI.PLLSAIM = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIM) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIM));
+  PeriphClkInit->PLLSAI.PLLSAIN = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIN));
+  PeriphClkInit->PLLSAI.PLLSAIP = (uint32_t)((((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIP)) + 1) << 1);
+  PeriphClkInit->PLLSAI.PLLSAIQ = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ));
+  /* Get the PLLSAI/PLLI2S division factors -------------------------------------------*/
+  PeriphClkInit->PLLI2SDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVQ) >> POSITION_VAL(RCC_DCKCFGR_PLLI2SDIVQ));
+  PeriphClkInit->PLLSAIDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVQ) >> POSITION_VAL(RCC_DCKCFGR_PLLSAIDIVQ));
+
+  /* Get the SAI1 clock configuration ----------------------------------------------*/
+  PeriphClkInit->Sai1ClockSelection = __HAL_RCC_GET_SAI1_SOURCE();
+
+  /* Get the SAI2 clock configuration ----------------------------------------------*/
+  PeriphClkInit->Sai2ClockSelection = __HAL_RCC_GET_SAI2_SOURCE();
+
+  /* Get the I2S APB1 clock configuration ------------------------------------------*/
+  PeriphClkInit->I2sApb1ClockSelection = __HAL_RCC_GET_I2S_APB1_SOURCE();
+
+  /* Get the I2S APB2 clock configuration ------------------------------------------*/
+  PeriphClkInit->I2sApb2ClockSelection = __HAL_RCC_GET_I2S_APB2_SOURCE();
+
+  /* Get the RTC Clock configuration -----------------------------------------------*/
+  tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE);
+  PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL));
+
+  /* Get the CEC clock configuration -----------------------------------------------*/
+  PeriphClkInit->CecClockSelection = __HAL_RCC_GET_CEC_SOURCE();
+
+  /* Get the FMPI2C1 clock configuration -----------------------------------------------*/
+  PeriphClkInit->Fmpi2c1ClockSelection = __HAL_RCC_GET_FMPI2C1_SOURCE();
+
+  /* Get the CK48 clock configuration -----------------------------------------------*/
+  PeriphClkInit->Clk48ClockSelection = __HAL_RCC_GET_CLK48_SOURCE();
+
+  /* Get the SDIO clock configuration -----------------------------------------------*/
+  PeriphClkInit->SdioClockSelection = __HAL_RCC_GET_SDIO_SOURCE();
+
+  /* Get the SPDIFRX clock configuration ----------------------------------------------*/
+  PeriphClkInit->SpdifClockSelection = __HAL_RCC_GET_SPDIFRX_SOURCE();
+
+  /* Get the TIM Prescaler configuration --------------------------------------------*/
+  if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET)
+  {
+    PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED;
+  }
+  else
+  {
+    PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED;
+  }
+}
+
+/**
+  * @brief  Return the peripheral clock frequency for a given peripheral(SAI..)
+  * @note   Return 0 if peripheral clock identifier not managed by this API
+  * @param  PeriphClk: Peripheral clock identifier
+  *         This parameter can be one of the following values:
+  *            @arg RCC_PERIPHCLK_SAI1: SAI1 peripheral clock
+  *            @arg RCC_PERIPHCLK_SAI2: SAI2 peripheral clock
+  * @retval Frequency in KHz
+  */
+uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk)
+{
+  uint32_t tmpreg1 = 0;
+  /* This variable used to store the SAI clock frequency (value in Hz) */
+  uint32_t frequency = 0;
+  /* This variable used to store the VCO Input (value in Hz) */
+  uint32_t vcoinput = 0;
+  /* This variable used to store the SAI clock source */
+  uint32_t saiclocksource = 0;
+  if ((PeriphClk == RCC_PERIPHCLK_SAI1) || (PeriphClk == RCC_PERIPHCLK_SAI2))
+  {
+    saiclocksource = RCC->DCKCFGR;
+    saiclocksource &= (RCC_DCKCFGR_SAI1SRC | RCC_DCKCFGR_SAI2SRC);
+    switch (saiclocksource)
+    {
+    case 0: /* PLLSAI is the clock source for SAI*/
+      {
+        /* Configure the PLLSAI division factor */
+        /* PLLSAI_VCO Input  = PLL_SOURCE/PLLSAIM */
+        if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
+        {
+          /* In Case the PLL Source is HSI (Internal Clock) */
+          vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIM));
+        }
+        else
+        {
+          /* In Case the PLL Source is HSE (External Clock) */
+          vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIM)));
+        }
+        /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
+        /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */
+        tmpreg1 = (RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> 24;
+        frequency = (vcoinput * ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> 6))/(tmpreg1);
+
+        /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */
+        tmpreg1 = (((RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVQ) >> 8) + 1);
+        frequency = frequency/(tmpreg1);
+        break;
+      }
+    case RCC_DCKCFGR_SAI1SRC_0: /* PLLI2S is the clock source for SAI*/
+    case RCC_DCKCFGR_SAI2SRC_0: /* PLLI2S is the clock source for SAI*/
+      {
+        /* Configure the PLLI2S division factor */
+        /* PLLI2S_VCO Input  = PLL_SOURCE/PLLI2SM */
+        if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
+        {
+          /* In Case the PLL Source is HSI (Internal Clock) */
+          vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM));
+        }
+        else
+        {
+          /* In Case the PLL Source is HSE (External Clock) */
+          vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)));
+        }
+
+        /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
+        /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */
+        tmpreg1 = (RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> 24;
+        frequency = (vcoinput * ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6))/(tmpreg1);
+
+        /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */
+        tmpreg1 = ((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVQ) + 1);
+        frequency = frequency/(tmpreg1);
+        break;
+      }
+    case RCC_DCKCFGR_SAI1SRC_1: /* PLLR is the clock source for SAI*/
+    case RCC_DCKCFGR_SAI2SRC_1: /* PLLR is the clock source for SAI*/
+      {
+        /* Configure the PLLI2S division factor */
+        /* PLL_VCO Input  = PLL_SOURCE/PLLM */
+        if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
+        {
+          /* In Case the PLL Source is HSI (Internal Clock) */
+          vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM));
+        }
+        else
+        {
+          /* In Case the PLL Source is HSE (External Clock) */
+          vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)));
+        }
+
+        /* PLL_VCO Output = PLL_VCO Input * PLLN */
+        /* SAI_CLK_x = PLL_VCO Output/PLLR */
+        tmpreg1 = (RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 28;
+        frequency = (vcoinput * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6))/(tmpreg1);
+        break;
+      }
+    case RCC_DCKCFGR_SAI1SRC: /* External clock is the clock source for SAI*/
+      {
+        frequency = EXTERNAL_CLOCK_VALUE;
+        break;
+      }
+    case RCC_DCKCFGR_SAI2SRC: /* PLLSRC(HSE or HSI) is the clock source for SAI*/
+      {
+        if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
+        {
+          /* In Case the PLL Source is HSI (Internal Clock) */
+          frequency = (uint32_t)(HSI_VALUE);
+        }
+        else
+        {
+          /* In Case the PLL Source is HSE (External Clock) */
+          frequency = (uint32_t)(HSE_VALUE);
+        }
+        break;
+      }
+    default :
+      {
+        break;
+      }
+    }
+  }
+  return frequency;
+}
+
+#endif /* STM32F446xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/**
+  * @brief  Initializes the RCC extended peripherals clocks according to the specified
+  *         parameters in the RCC_PeriphCLKInitTypeDef.
+  * @param  PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
+  *         contains the configuration information for the Extended Peripherals
+  *         clocks(I2S, SAI, LTDC RTC and TIM).
+  *
+  * @note   Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select
+  *         the RTC clock source; in this case the Backup domain will be reset in
+  *         order to modify the RTC Clock source, as consequence RTC registers (including
+  *         the backup registers) and RCC_BDCR register are set to their reset values.
+  *
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef  *PeriphClkInit)
+{
+  uint32_t tickstart = 0;
+  uint32_t tmpreg1 = 0;
+
+  /* Check the parameters */
+  assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection));
+
+  /*----------------------- SAI/I2S Configuration (PLLI2S) -------------------------*/
+
+  /*----------------------- Common configuration SAI/I2S ---------------------------*/
+  /* In Case of SAI or I2S Clock Configuration through PLLI2S, PLLI2SN division
+     factor is common parameters for both peripherals */
+  if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) ||
+     (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLI2S) == RCC_PERIPHCLK_SAI_PLLI2S))
+  {
+    /* check for Parameters */
+    assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN));
+
+    /* Disable the PLLI2S */
+    __HAL_RCC_PLLI2S_DISABLE();
+    /* Get tick */
+    tickstart = HAL_GetTick();
+    /* Wait till PLLI2S is disabled */
+    while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY)  != RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
+      {
+        /* return in case of Timeout detected */
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /*---------------------------- I2S configuration -------------------------------*/
+    /* In Case of I2S Clock Configuration through PLLI2S, PLLI2SR must be added
+      only for I2S configuration */
+    if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == (RCC_PERIPHCLK_I2S))
+    {
+      /* check for Parameters */
+      assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR));
+      /* Configure the PLLI2S division factors */
+      /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) × (PLLI2SN/PLLM) */
+      /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */
+      __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SR);
+    }
+
+    /*---------------------------- SAI configuration -------------------------------*/
+    /* In Case of SAI Clock Configuration through PLLI2S, PLLI2SQ and PLLI2S_DIVQ must
+       be added only for SAI configuration */
+    if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLI2S) == (RCC_PERIPHCLK_SAI_PLLI2S))
+    {
+      /* Check the PLLI2S division factors */
+      assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ));
+      assert_param(IS_RCC_PLLI2S_DIVQ_VALUE(PeriphClkInit->PLLI2SDivQ));
+
+      /* Read PLLI2SR value from PLLI2SCFGR register (this value is not need for SAI configuration) */
+      tmpreg1 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR));
+      /* Configure the PLLI2S division factors */
+      /* PLLI2S_VCO Input  = PLL_SOURCE/PLLM */
+      /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
+      /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */
+      __HAL_RCC_PLLI2S_SAICLK_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SQ , tmpreg1);
+      /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */
+      __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLI2SDivQ);
+    }
+
+    /* Enable the PLLI2S */
+    __HAL_RCC_PLLI2S_ENABLE();
+    /* Get tick */
+    tickstart = HAL_GetTick();
+    /* Wait till PLLI2S is ready */
+    while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY)  == RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
+      {
+        /* return in case of Timeout detected */
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  /*----------------------- SAI/LTDC Configuration (PLLSAI) ------------------*/
+
+  /*----------------------- Common configuration SAI/LTDC --------------------*/
+  /* In Case of SAI or LTDC Clock Configuration through PLLSAI, PLLSAIN division
+     factor is common parameters for both peripherals */
+  if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLSAI) == RCC_PERIPHCLK_SAI_PLLSAI) ||
+     (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == RCC_PERIPHCLK_LTDC))
+  {
+    /* Check the PLLSAI division factors */
+    assert_param(IS_RCC_PLLSAIN_VALUE(PeriphClkInit->PLLSAI.PLLSAIN));
+
+    /* Disable PLLSAI Clock */
+    __HAL_RCC_PLLSAI_DISABLE();
+    /* Get tick */
+    tickstart = HAL_GetTick();
+    /* Wait till PLLSAI is disabled */
+    while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE)
+      {
+        /* return in case of Timeout detected */
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /*---------------------------- SAI configuration -------------------------*/
+    /* In Case of SAI Clock Configuration through PLLSAI, PLLSAIQ and PLLSAI_DIVQ must
+       be added only for SAI configuration */
+    if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLSAI) == (RCC_PERIPHCLK_SAI_PLLSAI))
+    {
+      assert_param(IS_RCC_PLLSAIQ_VALUE(PeriphClkInit->PLLSAI.PLLSAIQ));
+      assert_param(IS_RCC_PLLSAI_DIVQ_VALUE(PeriphClkInit->PLLSAIDivQ));
+
+      /* Read PLLSAIR value from PLLSAICFGR register (this value is not need for SAI configuration) */
+      tmpreg1 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIR));
+      /* PLLSAI_VCO Input  = PLL_SOURCE/PLLM */
+      /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
+      /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */
+      __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN , PeriphClkInit->PLLSAI.PLLSAIQ, tmpreg1);
+      /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */
+      __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLSAIDivQ);
+    }
+
+    /*---------------------------- LTDC configuration ------------------------*/
+    if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == (RCC_PERIPHCLK_LTDC))
+    {
+      assert_param(IS_RCC_PLLSAIR_VALUE(PeriphClkInit->PLLSAI.PLLSAIR));
+      assert_param(IS_RCC_PLLSAI_DIVR_VALUE(PeriphClkInit->PLLSAIDivR));
+
+      /* Read PLLSAIR value from PLLSAICFGR register (this value is not need for SAI configuration) */
+      tmpreg1 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ));
+      /* PLLSAI_VCO Input  = PLL_SOURCE/PLLM */
+      /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
+      /* LTDC_CLK(first level) = PLLSAI_VCO Output/PLLSAIR */
+      __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN , tmpreg1, PeriphClkInit->PLLSAI.PLLSAIR);
+      /* LTDC_CLK = LTDC_CLK(first level)/PLLSAIDIVR */
+      __HAL_RCC_PLLSAI_PLLSAICLKDIVR_CONFIG(PeriphClkInit->PLLSAIDivR);
+    }
+    /* Enable PLLSAI Clock */
+    __HAL_RCC_PLLSAI_ENABLE();
+    /* Get tick */
+    tickstart = HAL_GetTick();
+    /* Wait till PLLSAI is ready */
+    while(__HAL_RCC_PLLSAI_GET_FLAG() == RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE)
+      {
+        /* return in case of Timeout detected */
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+
+  /*---------------------------- RTC configuration ---------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC))
+  {
+    /* Enable Power Clock*/
+    __HAL_RCC_PWR_CLK_ENABLE();
+
+    /* Enable write access to Backup domain */
+    PWR->CR |= PWR_CR_DBP;
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    while((PWR->CR & PWR_CR_DBP) == RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE)
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+    /* Reset the Backup domain only if the RTC Clock source selection is modified */
+    if((RCC->BDCR & RCC_BDCR_RTCSEL) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))
+    {
+      /* Store the content of BDCR register before the reset of Backup Domain */
+      tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL));
+      /* RTC Clock selection can be changed only if the Backup Domain is reset */
+      __HAL_RCC_BACKUPRESET_FORCE();
+      __HAL_RCC_BACKUPRESET_RELEASE();
+      /* Restore the Content of BDCR register */
+      RCC->BDCR = tmpreg1;
+      /* Wait for LSERDY if LSE was enabled */
+      if(HAL_IS_BIT_SET(tmpreg1, RCC_BDCR_LSERDY))
+      {
+        /* Get tick */
+        tickstart = HAL_GetTick();
+
+        /* Wait till LSE is ready */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+      __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection);
+    }
+  }
+
+  /*---------------------------- TIM configuration ---------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM))
+  {
+    __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection);
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configures the RCC_OscInitStruct according to the internal
+  * RCC configuration registers.
+  * @param  PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
+  *         will be configured.
+  * @retval None
+  */
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef  *PeriphClkInit)
+{
+  uint32_t tempreg;
+
+  /* Set all possible values for the extended clock type parameter------------*/
+  PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_SAI_PLLSAI | RCC_PERIPHCLK_SAI_PLLI2S | RCC_PERIPHCLK_LTDC | RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC;
+
+  /* Get the PLLI2S Clock configuration -----------------------------------------------*/
+  PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN));
+  PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR));
+  PeriphClkInit->PLLI2S.PLLI2SQ = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SQ));
+  /* Get the PLLSAI Clock configuration -----------------------------------------------*/
+  PeriphClkInit->PLLSAI.PLLSAIN = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIN));
+  PeriphClkInit->PLLSAI.PLLSAIR = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIR));
+  PeriphClkInit->PLLSAI.PLLSAIQ = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ));
+  /* Get the PLLSAI/PLLI2S division factors -----------------------------------------------*/
+  PeriphClkInit->PLLI2SDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVQ) >> POSITION_VAL(RCC_DCKCFGR_PLLI2SDIVQ));
+  PeriphClkInit->PLLSAIDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVQ) >> POSITION_VAL(RCC_DCKCFGR_PLLSAIDIVQ));
+  PeriphClkInit->PLLSAIDivR = (uint32_t)(RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVR);
+  /* Get the RTC Clock configuration -----------------------------------------------*/
+  tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE);
+  PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL));
+
+  if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET)
+  {
+    PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED;
+  }
+  else
+  {
+    PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED;
+  }
+}
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) ||\
+    defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+/**
+  * @brief  Initializes the RCC extended peripherals clocks according to the specified parameters in the
+  *         RCC_PeriphCLKInitTypeDef.
+  * @param  PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
+  *         contains the configuration information for the Extended Peripherals clocks(I2S and RTC clocks).
+  *
+  * @note   A caution to be taken when HAL_RCCEx_PeriphCLKConfig() is used to select RTC clock selection, in this case
+  *         the Reset of Backup domain will be applied in order to modify the RTC Clock source as consequence all backup
+  *        domain (RTC and RCC_BDCR register expect BKPSRAM) will be reset
+  *
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef  *PeriphClkInit)
+{
+  uint32_t tickstart = 0;
+  uint32_t tmpreg1 = 0;
+
+  /* Check the parameters */
+  assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection));
+
+  /*---------------------------- I2S configuration ---------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == (RCC_PERIPHCLK_I2S))
+  {
+    /* check for Parameters */
+    assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR));
+    assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN));
+#if defined(STM32F411xE)
+    assert_param(IS_RCC_PLLI2SM_VALUE(PeriphClkInit->PLLI2S.PLLI2SM));
+#endif /* STM32F411xE */
+    /* Disable the PLLI2S */
+    __HAL_RCC_PLLI2S_DISABLE();
+    /* Get tick */
+    tickstart = HAL_GetTick();
+    /* Wait till PLLI2S is disabled */
+    while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY)  != RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
+      {
+        /* return in case of Timeout detected */
+        return HAL_TIMEOUT;
+      }
+    }
+
+#if defined(STM32F411xE)
+    /* Configure the PLLI2S division factors */
+    /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) × (PLLI2SN/PLLI2SM) */
+    /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */
+    __HAL_RCC_PLLI2S_I2SCLK_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN, PeriphClkInit->PLLI2S.PLLI2SR);
+#else
+    /* Configure the PLLI2S division factors */
+    /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) × (PLLI2SN/PLLM) */
+    /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */
+    __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SR);
+#endif /* STM32F411xE */
+
+    /* Enable the PLLI2S */
+    __HAL_RCC_PLLI2S_ENABLE();
+    /* Get tick */
+    tickstart = HAL_GetTick();
+    /* Wait till PLLI2S is ready */
+    while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY)  == RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
+      {
+        /* return in case of Timeout detected */
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  /*---------------------------- RTC configuration ---------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC))
+  {
+    /* Enable Power Clock*/
+    __HAL_RCC_PWR_CLK_ENABLE();
+
+    /* Enable write access to Backup domain */
+    PWR->CR |= PWR_CR_DBP;
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    while((PWR->CR & PWR_CR_DBP) == RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE)
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+    /* Reset the Backup domain only if the RTC Clock source selection is modified */
+    if((RCC->BDCR & RCC_BDCR_RTCSEL) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))
+    {
+      /* Store the content of BDCR register before the reset of Backup Domain */
+      tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL));
+      /* RTC Clock selection can be changed only if the Backup Domain is reset */
+      __HAL_RCC_BACKUPRESET_FORCE();
+      __HAL_RCC_BACKUPRESET_RELEASE();
+      /* Restore the Content of BDCR register */
+      RCC->BDCR = tmpreg1;
+      /* Wait for LSERDY if LSE was enabled */
+      if(HAL_IS_BIT_SET(tmpreg1, RCC_BDCR_LSERDY))
+      {
+        /* Get tick */
+        tickstart = HAL_GetTick();
+
+        /* Wait till LSE is ready */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+      __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection);
+    }
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configures the RCC_OscInitStruct according to the internal
+  * RCC configuration registers.
+  * @param  PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
+  * will be configured.
+  * @retval None
+  */
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef  *PeriphClkInit)
+{
+  uint32_t tempreg;
+
+  /* Set all possible values for the extended clock type parameter------------*/
+  PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_RTC;
+
+  /* Get the PLLI2S Clock configuration -----------------------------------------------*/
+  PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN));
+  PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR));
+#if defined(STM32F411xE)
+  PeriphClkInit->PLLI2S.PLLI2SM = (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM);
+#endif /* STM32F411xE */
+  /* Get the RTC Clock configuration -----------------------------------------------*/
+  tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE);
+  PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL));
+
+}
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */
+
+#if defined(STM32F411xE) || defined(STM32F446xx)
+/**
+  * @brief  Select LSE mode
+  *
+  * @note   This mode is only available for STM32F411xx devices.
+  *
+  * @param  Mode: specifies the LSE mode.
+  *          This parameter can be one of the following values:
+  *            @arg RCC_LSE_LOWPOWER_MODE:  LSE oscillator in low power mode selection
+  *            @arg RCC_LSE_HIGHDRIVE_MODE: LSE oscillator in High Drive mode selection
+  * @retval None
+  */
+void HAL_RCCEx_SelectLSEMode(uint8_t Mode)
+{
+  /* Check the parameters */
+  assert_param(IS_RCC_LSE_MODE(Mode));
+  if(Mode == RCC_LSE_HIGHDRIVE_MODE)
+  {
+    SET_BIT(RCC->BDCR, RCC_BDCR_LSEMOD);
+  }
+  else
+  {
+    CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEMOD);
+  }
+}
+
+#endif /* STM32F411xE || STM32F446xx */
+
+#if defined(STM32F446xx)
+/**
+  * @brief  Initializes the RCC Oscillators according to the specified parameters in the
+  *         RCC_OscInitTypeDef.
+  * @param  RCC_OscInitStruct: pointer to an RCC_OscInitTypeDef structure that
+  *         contains the configuration information for the RCC Oscillators.
+  * @note   The PLL is not disabled when used as system clock.
+  * @note   This function add the PLL/PLLR factor management during PLL configuration this feature is only available in STM32F446xx devices
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef  *RCC_OscInitStruct)
+{
+  uint32_t tickstart = 0;
+
+  /* Check the parameters */
+  assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType));
+  /*------------------------------- HSE Configuration ------------------------*/
+  if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState));
+    /* When the HSE is used as system clock or clock source for PLL in these cases HSE will not disabled */
+    if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSE)                                                                     ||\
+      ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSE)) ||\
+      ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLLR) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSE)))
+    {
+      if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF))
+      {
+        return HAL_ERROR;
+      }
+    }
+    else
+    {
+      /* Reset HSEON and HSEBYP bits before configuring the HSE --------------*/
+      __HAL_RCC_HSE_CONFIG(RCC_HSE_OFF);
+
+      /* Get Start Tick*/
+      tickstart = HAL_GetTick();
+
+      /* Wait till HSE is disabled */
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET)
+      {
+        if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
+        {
+          return HAL_TIMEOUT;
+        }
+      }
+
+      /* Set the new HSE configuration ---------------------------------------*/
+      __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState);
+
+      /* Check the HSE State */
+      if((RCC_OscInitStruct->HSEState) != RCC_HSE_OFF)
+      {
+        /* Get Start Tick*/
+        tickstart = HAL_GetTick();
+
+        /* Wait till HSE is ready */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+      else
+      {
+        /* Get Start Tick*/
+        tickstart = HAL_GetTick();
+
+        /* Wait till HSE is bypassed or disabled */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+    }
+  }
+  /*----------------------------- HSI Configuration --------------------------*/
+  if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState));
+    assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue));
+
+    /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */
+    if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSI)                                                                     ||\
+      ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSI)) ||\
+      ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLLR) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSI)))
+    {
+      /* When HSI is used as system clock it will not disabled */
+      if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON))
+      {
+        return HAL_ERROR;
+      }
+      /* Otherwise, just the calibration is allowed */
+      else
+      {
+        /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/
+        __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
+      }
+    }
+    else
+    {
+      /* Check the HSI State */
+      if((RCC_OscInitStruct->HSIState)!= RCC_HSI_OFF)
+      {
+        /* Enable the Internal High Speed oscillator (HSI). */
+        __HAL_RCC_HSI_ENABLE();
+
+        /* Get Start Tick*/
+        tickstart = HAL_GetTick();
+
+        /* Wait till HSI is ready */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+
+        /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/
+        __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
+      }
+      else
+      {
+        /* Disable the Internal High Speed oscillator (HSI). */
+        __HAL_RCC_HSI_DISABLE();
+
+        /* Get Start Tick*/
+        tickstart = HAL_GetTick();
+
+        /* Wait till HSI is ready */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+    }
+  }
+  /*------------------------------ LSI Configuration -------------------------*/
+  if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState));
+
+    /* Check the LSI State */
+    if((RCC_OscInitStruct->LSIState)!= RCC_LSI_OFF)
+    {
+      /* Enable the Internal Low Speed oscillator (LSI). */
+      __HAL_RCC_LSI_ENABLE();
+
+      /* Get Start Tick*/
+      tickstart = HAL_GetTick();
+
+      /* Wait till LSI is ready */
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET)
+      {
+        if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
+        {
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+    else
+    {
+      /* Disable the Internal Low Speed oscillator (LSI). */
+      __HAL_RCC_LSI_DISABLE();
+
+      /* Get Start Tick*/
+      tickstart = HAL_GetTick();
+
+      /* Wait till LSI is ready */
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET)
+      {
+        if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
+        {
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  /*------------------------------ LSE Configuration -------------------------*/
+  if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState));
+
+    /* Enable Power Clock*/
+    __HAL_RCC_PWR_CLK_ENABLE();
+
+    /* Enable write access to Backup domain */
+    PWR->CR |= PWR_CR_DBP;
+
+    /* Wait for Backup domain Write protection disable */
+    tickstart = HAL_GetTick();
+
+    while((PWR->CR & PWR_CR_DBP) == RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE)
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Reset LSEON and LSEBYP bits before configuring the LSE ----------------*/
+    __HAL_RCC_LSE_CONFIG(RCC_LSE_OFF);
+
+    /* Get Start Tick*/
+    tickstart = HAL_GetTick();
+
+    /* Wait till LSE is ready */
+    while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Set the new LSE configuration -----------------------------------------*/
+    __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState);
+    /* Check the LSE State */
+    if((RCC_OscInitStruct->LSEState) != RCC_LSE_OFF)
+    {
+      /* Get Start Tick*/
+      tickstart = HAL_GetTick();
+
+      /* Wait till LSE is ready */
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+      {
+        if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+        {
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+    else
+    {
+      /* Get Start Tick*/
+      tickstart = HAL_GetTick();
+
+      /* Wait till LSE is ready */
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET)
+      {
+        if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+        {
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  /*-------------------------------- PLL Configuration -----------------------*/
+  /* Check the parameters */
+  assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState));
+  if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE)
+  {
+    /* Check if the PLL is used as system clock or not */
+    if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_CFGR_SWS_PLL)
+    {
+      if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON)
+      {
+        /* Check the parameters */
+        assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource));
+        assert_param(IS_RCC_PLLM_VALUE(RCC_OscInitStruct->PLL.PLLM));
+        assert_param(IS_RCC_PLLN_VALUE(RCC_OscInitStruct->PLL.PLLN));
+        assert_param(IS_RCC_PLLP_VALUE(RCC_OscInitStruct->PLL.PLLP));
+        assert_param(IS_RCC_PLLQ_VALUE(RCC_OscInitStruct->PLL.PLLQ));
+        assert_param(IS_RCC_PLLR_VALUE(RCC_OscInitStruct->PLL.PLLR));
+
+        /* Disable the main PLL. */
+        __HAL_RCC_PLL_DISABLE();
+
+        /* Get Start Tick*/
+        tickstart = HAL_GetTick();
+
+        /* Wait till PLL is ready */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+
+        /* Configure the main PLL clock source, multiplication and division factors. */
+        __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource,
+                             RCC_OscInitStruct->PLL.PLLM,
+                             RCC_OscInitStruct->PLL.PLLN,
+                             RCC_OscInitStruct->PLL.PLLP,
+                             RCC_OscInitStruct->PLL.PLLQ,
+                             RCC_OscInitStruct->PLL.PLLR);
+
+        /* Enable the main PLL. */
+        __HAL_RCC_PLL_ENABLE();
+
+        /* Get Start Tick*/
+        tickstart = HAL_GetTick();
+
+        /* Wait till PLL is ready */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+      else
+      {
+        /* Disable the main PLL. */
+        __HAL_RCC_PLL_DISABLE();
+
+        /* Get Start Tick*/
+        tickstart = HAL_GetTick();
+
+        /* Wait till PLL is ready */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+    }
+    else
+    {
+      return HAL_ERROR;
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configures the RCC_OscInitStruct according to the internal
+  * RCC configuration registers.
+  * @param  RCC_OscInitStruct: pointer to an RCC_OscInitTypeDef structure that will be configured.
+  *
+  * @note   This function is only available in case of STM32F446xx devices.
+  * @note   This function add the PLL/PLLR factor management
+  * @retval None
+  */
+void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef  *RCC_OscInitStruct)
+{
+  /* Set all possible values for the Oscillator type parameter ---------------*/
+  RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI;
+
+  /* Get the HSE configuration -----------------------------------------------*/
+  if((RCC->CR &RCC_CR_HSEBYP) == RCC_CR_HSEBYP)
+  {
+    RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS;
+  }
+  else if((RCC->CR &RCC_CR_HSEON) == RCC_CR_HSEON)
+  {
+    RCC_OscInitStruct->HSEState = RCC_HSE_ON;
+  }
+  else
+  {
+    RCC_OscInitStruct->HSEState = RCC_HSE_OFF;
+  }
+
+  /* Get the HSI configuration -----------------------------------------------*/
+  if((RCC->CR &RCC_CR_HSION) == RCC_CR_HSION)
+  {
+    RCC_OscInitStruct->HSIState = RCC_HSI_ON;
+  }
+  else
+  {
+    RCC_OscInitStruct->HSIState = RCC_HSI_OFF;
+  }
+
+  RCC_OscInitStruct->HSICalibrationValue = (uint32_t)((RCC->CR &RCC_CR_HSITRIM) >> POSITION_VAL(RCC_CR_HSITRIM));
+
+  /* Get the LSE configuration -----------------------------------------------*/
+  if((RCC->BDCR &RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP)
+  {
+    RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS;
+  }
+  else if((RCC->BDCR &RCC_BDCR_LSEON) == RCC_BDCR_LSEON)
+  {
+    RCC_OscInitStruct->LSEState = RCC_LSE_ON;
+  }
+  else
+  {
+    RCC_OscInitStruct->LSEState = RCC_LSE_OFF;
+  }
+
+  /* Get the LSI configuration -----------------------------------------------*/
+  if((RCC->CSR &RCC_CSR_LSION) == RCC_CSR_LSION)
+  {
+    RCC_OscInitStruct->LSIState = RCC_LSI_ON;
+  }
+  else
+  {
+    RCC_OscInitStruct->LSIState = RCC_LSI_OFF;
+  }
+
+  /* Get the PLL configuration -----------------------------------------------*/
+  if((RCC->CR &RCC_CR_PLLON) == RCC_CR_PLLON)
+  {
+    RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON;
+  }
+  else
+  {
+    RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF;
+  }
+  RCC_OscInitStruct->PLL.PLLSource = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC);
+  RCC_OscInitStruct->PLL.PLLM = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM);
+  RCC_OscInitStruct->PLL.PLLN = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> POSITION_VAL(RCC_PLLCFGR_PLLN));
+  RCC_OscInitStruct->PLL.PLLP = (uint32_t)((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) + RCC_PLLCFGR_PLLP_0) << 1) >> POSITION_VAL(RCC_PLLCFGR_PLLP));
+  RCC_OscInitStruct->PLL.PLLQ = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLQ) >> POSITION_VAL(RCC_PLLCFGR_PLLQ));
+  RCC_OscInitStruct->PLL.PLLR = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> POSITION_VAL(RCC_PLLCFGR_PLLR));
+}
+
+/**
+  * @brief  Returns the SYSCLK frequency
+  *
+  * @note   This function is only available in case of STM32F446xx devices.
+  * @note   This function add the PLL/PLLR System clock source
+  *
+  * @note   The system frequency computed by this function is not the real
+  *         frequency in the chip. It is calculated based on the predefined
+  *         constant and the selected clock source:
+  * @note     If SYSCLK source is HSI, function returns values based on HSI_VALUE(*)
+  * @note     If SYSCLK source is HSE, function returns values based on HSE_VALUE(**)
+  * @note     If SYSCLK source is PLL, function returns values based on HSE_VALUE(**)
+  *           or HSI_VALUE(*) multiplied/divided by the PLL factors.
+  * @note     (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
+  *               16 MHz) but the real value may vary depending on the variations
+  *               in voltage and temperature.
+  * @note     (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
+  *                25 MHz), user has to ensure that HSE_VALUE is same as the real
+  *                frequency of the crystal used. Otherwise, this function may
+  *                have wrong result.
+  *
+  * @note   The result of this function could be not correct when using fractional
+  *         value for HSE crystal.
+  *
+  * @note   This function can be used by the user application to compute the
+  *         baudrate for the communication peripherals or configure other parameters.
+  *
+  * @note   Each time SYSCLK changes, this function must be called to update the
+  *         right SYSCLK value. Otherwise, any configuration based on this function will be incorrect.
+  *
+  *
+  * @retval SYSCLK frequency
+  */
+uint32_t HAL_RCC_GetSysClockFreq(void)
+{
+  uint32_t pllm = 0;
+  uint32_t pllvco = 0;
+  uint32_t pllp = 0;
+  uint32_t pllr = 0;
+  uint32_t sysclockfreq = 0;
+
+  /* Get SYSCLK source -------------------------------------------------------*/
+  switch (RCC->CFGR & RCC_CFGR_SWS)
+  {
+    case RCC_CFGR_SWS_HSI:  /* HSI used as system clock source */
+    {
+      sysclockfreq = HSI_VALUE;
+       break;
+    }
+    case RCC_CFGR_SWS_HSE:  /* HSE used as system clock  source */
+    {
+      sysclockfreq = HSE_VALUE;
+      break;
+    }
+    case RCC_CFGR_SWS_PLL:  /* PLL/PLLP used as system clock  source */
+    {
+      /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN
+      SYSCLK = PLL_VCO / PLLP */
+      pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
+      if(__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLSOURCE_HSI)
+      {
+        /* HSE used as PLL clock source */
+        pllvco = ((HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> POSITION_VAL(RCC_PLLCFGR_PLLN)));
+      }
+      else
+      {
+        /* HSI used as PLL clock source */
+        pllvco = ((HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> POSITION_VAL(RCC_PLLCFGR_PLLN)));
+      }
+      pllp = ((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >> POSITION_VAL(RCC_PLLCFGR_PLLP)) + 1 ) *2);
+
+      sysclockfreq = pllvco/pllp;
+      break;
+    }
+    case RCC_CFGR_SWS_PLLR:  /* PLL/PLLR used as system clock  source */
+    {
+      /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN
+      SYSCLK = PLL_VCO / PLLR */
+      pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
+      if(__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLSOURCE_HSI)
+      {
+        /* HSE used as PLL clock source */
+        pllvco = ((HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> POSITION_VAL(RCC_PLLCFGR_PLLN)));
+      }
+      else
+      {
+        /* HSI used as PLL clock source */
+        pllvco = ((HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> POSITION_VAL(RCC_PLLCFGR_PLLN)));
+      }
+      pllr = ((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> POSITION_VAL(RCC_PLLCFGR_PLLR));
+
+      sysclockfreq = pllvco/pllr;
+      break;
+    }
+    default:
+    {
+      sysclockfreq = HSI_VALUE;
+      break;
+    }
+  }
+  return sysclockfreq;
+}
+#endif /* STM32F446xx */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_RCC_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/