Based on user/ft/stm32-dev-bridge, without the project-specific build

directories (and duplicated code).

1 files changed, 1408 insertions, 0 deletions

diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2s.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2s.c
new file mode 100644
index 0000000..63e4288
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2s.c
@@ -0,0 +1,1408 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_i2s.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   I2S HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Integrated Interchip Sound (I2S) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral State and Errors functions
+  @verbatim
+ ===============================================================================
+                  ##### How to use this driver #####
+ ===============================================================================
+ [..]
+    The I2S HAL driver can be used as follow:
+
+    (#) Declare a I2S_HandleTypeDef handle structure.
+    (#) Initialize the I2S low level resources by implement the HAL_I2S_MspInit() API:
+        (##) Enable the SPIx interface clock.
+        (##) I2S pins configuration:
+            (+++) Enable the clock for the I2S GPIOs.
+            (+++) Configure these I2S pins as alternate function pull-up.
+        (##) NVIC configuration if you need to use interrupt process (HAL_I2S_Transmit_IT()
+             and HAL_I2S_Receive_IT() APIs).
+            (+++) Configure the I2Sx interrupt priority.
+            (+++) Enable the NVIC I2S IRQ handle.
+        (##) DMA Configuration if you need to use DMA process (HAL_I2S_Transmit_DMA()
+             and HAL_I2S_Receive_DMA() APIs:
+            (+++) Declare a DMA handle structure for the Tx/Rx stream.
+            (+++) Enable the DMAx interface clock.
+            (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.
+            (+++) Configure the DMA Tx/Rx Stream.
+            (+++) Associate the initialized DMA handle to the I2S DMA Tx/Rx handle.
+            (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the
+                DMA Tx/Rx Stream.
+
+   (#) Program the Mode, Standard, Data Format, MCLK Output, Audio frequency and Polarity
+       using HAL_I2S_Init() function.
+
+   -@- The specific I2S interrupts (Transmission complete interrupt,
+       RXNE interrupt and Error Interrupts) will be managed using the macros
+       __I2S_ENABLE_IT() and __I2S_DISABLE_IT() inside the transmit and receive process.
+   -@- Make sure that either:
+        (+@) I2S PLL is configured or
+        (+@) External clock source is configured after setting correctly
+             the define constant EXTERNAL_CLOCK_VALUE in the stm32f4xx_hal_conf.h file.
+
+   (#) Three operation modes are available within this driver :
+
+   *** Polling mode IO operation ***
+   =================================
+   [..]
+     (+) Send an amount of data in blocking mode using HAL_I2S_Transmit()
+     (+) Receive an amount of data in blocking mode using HAL_I2S_Receive()
+
+   *** Interrupt mode IO operation ***
+   ===================================
+   [..]
+     (+) Send an amount of data in non blocking mode using HAL_I2S_Transmit_IT()
+     (+) At transmission end of half transfer HAL_I2S_TxHalfCpltCallback is executed and user can
+         add his own code by customization of function pointer HAL_I2S_TxHalfCpltCallback
+     (+) At transmission end of transfer HAL_I2S_TxCpltCallback is executed and user can
+         add his own code by customization of function pointer HAL_I2S_TxCpltCallback
+     (+) Receive an amount of data in non blocking mode using HAL_I2S_Receive_IT()
+     (+) At reception end of half transfer HAL_I2S_RxHalfCpltCallback is executed and user can
+         add his own code by customization of function pointer HAL_I2S_RxHalfCpltCallback
+     (+) At reception end of transfer HAL_I2S_RxCpltCallback is executed and user can
+         add his own code by customization of function pointer HAL_I2S_RxCpltCallback
+     (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can
+         add his own code by customization of function pointer HAL_I2S_ErrorCallback
+
+   *** DMA mode IO operation ***
+   ==============================
+   [..]
+     (+) Send an amount of data in non blocking mode (DMA) using HAL_I2S_Transmit_DMA()
+     (+) At transmission end of half transfer HAL_I2S_TxHalfCpltCallback is executed and user can
+         add his own code by customization of function pointer HAL_I2S_TxHalfCpltCallback
+     (+) At transmission end of transfer HAL_I2S_TxCpltCallback is executed and user can
+         add his own code by customization of function pointer HAL_I2S_TxCpltCallback
+     (+) Receive an amount of data in non blocking mode (DMA) using HAL_I2S_Receive_DMA()
+     (+) At reception end of half transfer HAL_I2S_RxHalfCpltCallback is executed and user can
+         add his own code by customization of function pointer HAL_I2S_RxHalfCpltCallback
+     (+) At reception end of transfer HAL_I2S_RxCpltCallback is executed and user can
+         add his own code by customization of function pointer HAL_I2S_RxCpltCallback
+     (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can
+         add his own code by customization of function pointer HAL_I2S_ErrorCallback
+     (+) Pause the DMA Transfer using HAL_I2S_DMAPause()
+     (+) Resume the DMA Transfer using HAL_I2S_DMAResume()
+     (+) Stop the DMA Transfer using HAL_I2S_DMAStop()
+
+   *** I2S HAL driver macros list ***
+   =============================================
+   [..]
+     Below the list of most used macros in USART HAL driver.
+
+      (+) __HAL_I2S_ENABLE: Enable the specified SPI peripheral (in I2S mode)
+      (+) __HAL_I2S_DISABLE: Disable the specified SPI peripheral (in I2S mode)
+      (+) __HAL_I2S_ENABLE_IT : Enable the specified I2S interrupts
+      (+) __HAL_I2S_DISABLE_IT : Disable the specified I2S interrupts
+      (+) __HAL_I2S_GET_FLAG: Check whether the specified I2S flag is set or not
+
+    [..]
+      (@) You can refer to the I2S HAL driver header file for more useful macros
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup I2S I2S
+  * @brief I2S HAL module driver
+  * @{
+  */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup I2S_Private_Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup I2S_Exported_Functions I2S Exported Functions
+  * @{
+  */
+
+/** @defgroup I2S_Exported_Functions_Group1 Initialization and de-initialization functions
+ *  @brief    Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+              ##### Initialization and de-initialization functions #####
+ ===============================================================================
+    [..]  This subsection provides a set of functions allowing to initialize and
+          de-initialize the I2Sx peripheral in simplex mode:
+
+      (+) User must Implement HAL_I2S_MspInit() function in which he configures
+          all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
+
+      (+) Call the function HAL_I2S_Init() to configure the selected device with
+          the selected configuration:
+        (++) Mode
+        (++) Standard
+        (++) Data Format
+        (++) MCLK Output
+        (++) Audio frequency
+        (++) Polarity
+
+      (+) Call the function HAL_I2S_DeInit() to restore the default configuration
+          of the selected I2Sx peripheral.
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief Initializes the I2S according to the specified parameters
+  *         in the I2S_InitTypeDef and create the associated handle.
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval HAL status
+  */
+__weak HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s)
+{
+  uint32_t tmpreg = 0, i2sdiv = 2, i2sodd = 0, packetlength = 1;
+  uint32_t tmp = 0, i2sclk = 0;
+
+  /* Check the I2S handle allocation */
+  if(hi2s == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the I2S parameters */
+  assert_param(IS_I2S_ALL_INSTANCE(hi2s->Instance));
+  assert_param(IS_I2S_MODE(hi2s->Init.Mode));
+  assert_param(IS_I2S_STANDARD(hi2s->Init.Standard));
+  assert_param(IS_I2S_DATA_FORMAT(hi2s->Init.DataFormat));
+  assert_param(IS_I2S_MCLK_OUTPUT(hi2s->Init.MCLKOutput));
+  assert_param(IS_I2S_AUDIO_FREQ(hi2s->Init.AudioFreq));
+  assert_param(IS_I2S_CPOL(hi2s->Init.CPOL));
+  assert_param(IS_I2S_CLOCKSOURCE(hi2s->Init.ClockSource));
+
+  if(hi2s->State == HAL_I2S_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hi2s->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */
+    HAL_I2S_MspInit(hi2s);
+  }
+
+  hi2s->State = HAL_I2S_STATE_BUSY;
+
+  /*----------------------- SPIx I2SCFGR & I2SPR Configuration ---------------*/
+  /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */
+  hi2s->Instance->I2SCFGR &= ~(SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CKPOL | \
+                               SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC | SPI_I2SCFGR_I2SCFG | \
+                               SPI_I2SCFGR_I2SE | SPI_I2SCFGR_I2SMOD);
+  hi2s->Instance->I2SPR = 0x0002;
+
+  /* Get the I2SCFGR register value */
+  tmpreg = hi2s->Instance->I2SCFGR;
+
+  /* If the default frequency value has to be written, reinitialize i2sdiv and i2sodd */
+  /* If the requested audio frequency is not the default, compute the prescaler */
+  if(hi2s->Init.AudioFreq != I2S_AUDIOFREQ_DEFAULT)
+  {
+    /* Check the frame length (For the Prescaler computing) *******************/
+    if(hi2s->Init.DataFormat != I2S_DATAFORMAT_16B)
+    {
+      /* Packet length is 32 bits */
+      packetlength = 2;
+    }
+
+    /* Get I2S source Clock frequency  ****************************************/
+    /* If an external I2S clock has to be used, the specific define should be set
+    in the project configuration or in the stm32f4xx_conf.h file */
+    i2sclk = I2S_GetInputClock(hi2s);
+
+    /* Compute the Real divider depending on the MCLK output state, with a floating point */
+    if(hi2s->Init.MCLKOutput == I2S_MCLKOUTPUT_ENABLE)
+    {
+      /* MCLK output is enabled */
+      tmp = (uint32_t)(((((i2sclk / 256) * 10) / hi2s->Init.AudioFreq)) + 5);
+    }
+    else
+    {
+      /* MCLK output is disabled */
+      tmp = (uint32_t)(((((i2sclk / (32 * packetlength)) *10 ) / hi2s->Init.AudioFreq)) + 5);
+    }
+
+    /* Remove the flatting point */
+    tmp = tmp / 10;
+
+    /* Check the parity of the divider */
+    i2sodd = (uint32_t)(tmp & (uint32_t)1);
+
+    /* Compute the i2sdiv prescaler */
+    i2sdiv = (uint32_t)((tmp - i2sodd) / 2);
+
+    /* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */
+    i2sodd = (uint32_t) (i2sodd << 8);
+  }
+
+  /* Test if the divider is 1 or 0 or greater than 0xFF */
+  if((i2sdiv < 2) || (i2sdiv > 0xFF))
+  {
+    /* Set the default values */
+    i2sdiv = 2;
+    i2sodd = 0;
+  }
+
+  /* Write to SPIx I2SPR register the computed value */
+  hi2s->Instance->I2SPR = (uint32_t)((uint32_t)i2sdiv | (uint32_t)(i2sodd | (uint32_t)hi2s->Init.MCLKOutput));
+
+  /* Configure the I2S with the I2S_InitStruct values */
+  tmpreg |= (uint32_t)(SPI_I2SCFGR_I2SMOD | hi2s->Init.Mode | hi2s->Init.Standard | hi2s->Init.DataFormat | hi2s->Init.CPOL);
+
+#if defined(SPI_I2SCFGR_ASTRTEN)
+  if (hi2s->Init.Standard == I2S_STANDARD_PCM_SHORT)
+  {
+  /* Write to SPIx I2SCFGR */
+  hi2s->Instance->I2SCFGR = tmpreg | SPI_I2SCFGR_ASTRTEN;
+  }
+  else
+  {
+  /* Write to SPIx I2SCFGR */
+  hi2s->Instance->I2SCFGR = tmpreg;
+  }
+#else
+  /* Write to SPIx I2SCFGR */
+  hi2s->Instance->I2SCFGR = tmpreg;
+#endif
+
+  hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+  hi2s->State= HAL_I2S_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief DeInitializes the I2S peripheral
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2S_DeInit(I2S_HandleTypeDef *hi2s)
+{
+  /* Check the I2S handle allocation */
+  if(hi2s == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  hi2s->State = HAL_I2S_STATE_BUSY;
+
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */
+  HAL_I2S_MspDeInit(hi2s);
+
+  hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+  hi2s->State = HAL_I2S_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hi2s);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief I2S MSP Init
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval None
+  */
+ __weak void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_I2S_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief I2S MSP DeInit
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval None
+  */
+ __weak void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_I2S_MspDeInit could be implemented in the user file
+   */
+}
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Exported_Functions_Group2 IO operation functions
+ *  @brief    Data transfers functions
+ *
+@verbatim
+ ===============================================================================
+                      ##### IO operation functions #####
+ ===============================================================================
+    [..]
+    This subsection provides a set of functions allowing to manage the I2S data
+    transfers.
+
+    (#) There are two modes of transfer:
+       (++) Blocking mode : The communication is performed in the polling mode.
+            The status of all data processing is returned by the same function
+            after finishing transfer.
+       (++) No-Blocking mode : The communication is performed using Interrupts
+            or DMA. These functions return the status of the transfer startup.
+            The end of the data processing will be indicated through the
+            dedicated I2S IRQ when using Interrupt mode or the DMA IRQ when
+            using DMA mode.
+
+    (#) Blocking mode functions are :
+        (++) HAL_I2S_Transmit()
+        (++) HAL_I2S_Receive()
+
+    (#) No-Blocking mode functions with Interrupt are :
+        (++) HAL_I2S_Transmit_IT()
+        (++) HAL_I2S_Receive_IT()
+
+    (#) No-Blocking mode functions with DMA are :
+        (++) HAL_I2S_Transmit_DMA()
+        (++) HAL_I2S_Receive_DMA()
+
+    (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
+        (++) HAL_I2S_TxCpltCallback()
+        (++) HAL_I2S_RxCpltCallback()
+        (++) HAL_I2S_ErrorCallback()
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief Transmit an amount of data in blocking mode
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @param pData: a 16-bit pointer to data buffer.
+  * @param Size: number of data sample to be sent:
+  * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+  *       configuration phase, the Size parameter means the number of 16-bit data length
+  *       in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
+  *       the Size parameter means the number of 16-bit data length.
+  * @param  Timeout: Timeout duration
+  * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
+  *       between Master and Slave(example: audio streaming).
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  uint32_t tmp1 = 0, tmp2 = 0;
+  if((pData == NULL ) || (Size == 0))
+  {
+    return  HAL_ERROR;
+  }
+
+  if(hi2s->State == HAL_I2S_STATE_READY)
+  {
+    tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+    tmp2 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+    if((tmp1 == I2S_DATAFORMAT_24B)|| \
+       (tmp2 == I2S_DATAFORMAT_32B))
+    {
+      hi2s->TxXferSize = Size*2;
+      hi2s->TxXferCount = Size*2;
+    }
+    else
+    {
+      hi2s->TxXferSize = Size;
+      hi2s->TxXferCount = Size;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hi2s);
+
+    hi2s->State = HAL_I2S_STATE_BUSY_TX;
+
+    /* Check if the I2S is already enabled */
+    if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+    {
+      /* Enable I2S peripheral */
+      __HAL_I2S_ENABLE(hi2s);
+    }
+
+    while(hi2s->TxXferCount > 0)
+    {
+      hi2s->Instance->DR = (*pData++);
+      hi2s->TxXferCount--;
+      /* Wait until TXE flag is set */
+      if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_TXE, RESET, Timeout) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+    /* Check if Slave mode is selected */
+    if(((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_SLAVE_TX) || ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_SLAVE_RX))
+    {
+      /* Wait until Busy flag is reset */
+      if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_BSY, SET, Timeout) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+    hi2s->State = HAL_I2S_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2s);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Receive an amount of data in blocking mode
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @param pData: a 16-bit pointer to data buffer.
+  * @param Size: number of data sample to be sent:
+  * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+  *       configuration phase, the Size parameter means the number of 16-bit data length
+  *       in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
+  *       the Size parameter means the number of 16-bit data length.
+  * @param Timeout: Timeout duration
+  * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
+  *       between Master and Slave(example: audio streaming).
+  * @note In I2S Master Receiver mode, just after enabling the peripheral the clock will be generate
+  *       in continuous way and as the I2S is not disabled at the end of the I2S transaction.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  uint32_t tmp1 = 0, tmp2 = 0;
+  if((pData == NULL ) || (Size == 0))
+  {
+    return  HAL_ERROR;
+  }
+
+  if(hi2s->State == HAL_I2S_STATE_READY)
+  {
+    tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+    tmp2 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+    if((tmp1 == I2S_DATAFORMAT_24B)|| \
+       (tmp2 == I2S_DATAFORMAT_32B))
+    {
+      hi2s->RxXferSize = Size*2;
+      hi2s->RxXferCount = Size*2;
+    }
+    else
+    {
+      hi2s->RxXferSize = Size;
+      hi2s->RxXferCount = Size;
+    }
+    /* Process Locked */
+    __HAL_LOCK(hi2s);
+
+    hi2s->State = HAL_I2S_STATE_BUSY_RX;
+
+    /* Check if the I2S is already enabled */
+    if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+    {
+      /* Enable I2S peripheral */
+      __HAL_I2S_ENABLE(hi2s);
+    }
+
+    /* Check if Master Receiver mode is selected */
+    if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX)
+    {
+      /* Clear the Overrun Flag by a read operation on the SPI_DR register followed by a read
+      access to the SPI_SR register. */
+      __HAL_I2S_CLEAR_OVRFLAG(hi2s);
+    }
+
+    /* Receive data */
+    while(hi2s->RxXferCount > 0)
+    {
+      /* Wait until RXNE flag is set */
+      if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+
+      (*pData++) = hi2s->Instance->DR;
+      hi2s->RxXferCount--;
+    }
+
+    hi2s->State = HAL_I2S_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2s);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Transmit an amount of data in non-blocking mode with Interrupt
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @param pData: a 16-bit pointer to data buffer.
+  * @param Size: number of data sample to be sent:
+  * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+  *       configuration phase, the Size parameter means the number of 16-bit data length
+  *       in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
+  *       the Size parameter means the number of 16-bit data length.
+  * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
+  *       between Master and Slave(example: audio streaming).
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size)
+{
+  uint32_t tmp1 = 0, tmp2 = 0;
+  if(hi2s->State == HAL_I2S_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    hi2s->pTxBuffPtr = pData;
+    tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+    tmp2 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+    if((tmp1 == I2S_DATAFORMAT_24B)|| \
+      (tmp2 == I2S_DATAFORMAT_32B))
+    {
+      hi2s->TxXferSize = Size*2;
+      hi2s->TxXferCount = Size*2;
+    }
+    else
+    {
+      hi2s->TxXferSize = Size;
+      hi2s->TxXferCount = Size;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hi2s);
+
+    hi2s->State = HAL_I2S_STATE_BUSY_TX;
+    hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+
+    /* Enable TXE and ERR interrupt */
+    __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR));
+
+    /* Check if the I2S is already enabled */
+    if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+    {
+      /* Enable I2S peripheral */
+      __HAL_I2S_ENABLE(hi2s);
+    }
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2s);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Receive an amount of data in non-blocking mode with Interrupt
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @param pData: a 16-bit pointer to the Receive data buffer.
+  * @param Size: number of data sample to be sent:
+  * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+  *       configuration phase, the Size parameter means the number of 16-bit data length
+  *       in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
+  *       the Size parameter means the number of 16-bit data length.
+  * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
+  *       between Master and Slave(example: audio streaming).
+  * @note It is recommended to use DMA for the I2S receiver to avoid de-synchronisation
+  * between Master and Slave otherwise the I2S interrupt should be optimized.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size)
+{
+  uint32_t tmp1 = 0, tmp2 = 0;
+  if(hi2s->State == HAL_I2S_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    hi2s->pRxBuffPtr = pData;
+    tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+    tmp2 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+    if((tmp1 == I2S_DATAFORMAT_24B)||\
+      (tmp2 == I2S_DATAFORMAT_32B))
+    {
+      hi2s->RxXferSize = Size*2;
+      hi2s->RxXferCount = Size*2;
+    }
+    else
+    {
+      hi2s->RxXferSize = Size;
+      hi2s->RxXferCount = Size;
+    }
+    /* Process Locked */
+    __HAL_LOCK(hi2s);
+
+    hi2s->State = HAL_I2S_STATE_BUSY_RX;
+    hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+
+    /* Enable TXE and ERR interrupt */
+    __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR));
+
+    /* Check if the I2S is already enabled */
+    if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+    {
+      /* Enable I2S peripheral */
+      __HAL_I2S_ENABLE(hi2s);
+    }
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2s);
+
+    return HAL_OK;
+  }
+
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Transmit an amount of data in non-blocking mode with DMA
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @param pData: a 16-bit pointer to the Transmit data buffer.
+  * @param Size: number of data sample to be sent:
+  * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+  *       configuration phase, the Size parameter means the number of 16-bit data length
+  *       in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
+  *       the Size parameter means the number of 16-bit data length.
+  * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
+  *       between Master and Slave(example: audio streaming).
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size)
+{
+  uint32_t *tmp;
+  uint32_t tmp1 = 0, tmp2 = 0;
+
+  if((pData == NULL) || (Size == 0))
+  {
+    return  HAL_ERROR;
+  }
+
+  if(hi2s->State == HAL_I2S_STATE_READY)
+  {
+    hi2s->pTxBuffPtr = pData;
+    tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+    tmp2 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+    if((tmp1 == I2S_DATAFORMAT_24B)|| \
+      (tmp2 == I2S_DATAFORMAT_32B))
+    {
+      hi2s->TxXferSize = Size*2;
+      hi2s->TxXferCount = Size*2;
+    }
+    else
+    {
+      hi2s->TxXferSize = Size;
+      hi2s->TxXferCount = Size;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hi2s);
+
+    hi2s->State = HAL_I2S_STATE_BUSY_TX;
+    hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+
+    /* Set the I2S Tx DMA Half transfer complete callback */
+    hi2s->hdmatx->XferHalfCpltCallback = I2S_DMATxHalfCplt;
+
+    /* Set the I2S Tx DMA transfer complete callback */
+    hi2s->hdmatx->XferCpltCallback = I2S_DMATxCplt;
+
+    /* Set the DMA error callback */
+    hi2s->hdmatx->XferErrorCallback = I2S_DMAError;
+
+    /* Enable the Tx DMA Stream */
+    tmp = (uint32_t*)&pData;
+    HAL_DMA_Start_IT(hi2s->hdmatx, *(uint32_t*)tmp, (uint32_t)&hi2s->Instance->DR, hi2s->TxXferSize);
+
+    /* Check if the I2S is already enabled */
+    if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+    {
+      /* Enable I2S peripheral */
+      __HAL_I2S_ENABLE(hi2s);
+    }
+
+     /* Check if the I2S Tx request is already enabled */
+    if((hi2s->Instance->CR2 & SPI_CR2_TXDMAEN) != SPI_CR2_TXDMAEN)
+    {
+      /* Enable Tx DMA Request */
+      hi2s->Instance->CR2 |= SPI_CR2_TXDMAEN;
+    }
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2s);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Receive an amount of data in non-blocking mode with DMA
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @param pData: a 16-bit pointer to the Receive data buffer.
+  * @param Size: number of data sample to be sent:
+  * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+  *       configuration phase, the Size parameter means the number of 16-bit data length
+  *       in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
+  *       the Size parameter means the number of 16-bit data length.
+  * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
+  *       between Master and Slave(example: audio streaming).
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size)
+{
+  uint32_t *tmp;
+  uint32_t tmp1 = 0, tmp2 = 0;
+
+  if((pData == NULL) || (Size == 0))
+  {
+    return  HAL_ERROR;
+  }
+
+  if(hi2s->State == HAL_I2S_STATE_READY)
+  {
+    hi2s->pRxBuffPtr = pData;
+    tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+    tmp2 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
+    if((tmp1 == I2S_DATAFORMAT_24B)|| \
+      (tmp2 == I2S_DATAFORMAT_32B))
+    {
+      hi2s->RxXferSize = Size*2;
+      hi2s->RxXferCount = Size*2;
+    }
+    else
+    {
+      hi2s->RxXferSize = Size;
+      hi2s->RxXferCount = Size;
+    }
+    /* Process Locked */
+    __HAL_LOCK(hi2s);
+
+    hi2s->State = HAL_I2S_STATE_BUSY_RX;
+    hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+
+    /* Set the I2S Rx DMA Half transfer complete callback */
+    hi2s->hdmarx->XferHalfCpltCallback = I2S_DMARxHalfCplt;
+
+    /* Set the I2S Rx DMA transfer complete callback */
+    hi2s->hdmarx->XferCpltCallback = I2S_DMARxCplt;
+
+    /* Set the DMA error callback */
+    hi2s->hdmarx->XferErrorCallback = I2S_DMAError;
+
+    /* Check if Master Receiver mode is selected */
+    if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX)
+    {
+      /* Clear the Overrun Flag by a read operation to the SPI_DR register followed by a read
+      access to the SPI_SR register. */
+      __HAL_I2S_CLEAR_OVRFLAG(hi2s);
+    }
+
+    /* Enable the Rx DMA Stream */
+    tmp = (uint32_t*)&pData;
+    HAL_DMA_Start_IT(hi2s->hdmarx, (uint32_t)&hi2s->Instance->DR, *(uint32_t*)tmp, hi2s->RxXferSize);
+
+    /* Check if the I2S is already enabled */
+    if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+    {
+      /* Enable I2S peripheral */
+      __HAL_I2S_ENABLE(hi2s);
+    }
+
+     /* Check if the I2S Rx request is already enabled */
+    if((hi2s->Instance->CR2 &SPI_CR2_RXDMAEN) != SPI_CR2_RXDMAEN)
+    {
+      /* Enable Rx DMA Request */
+      hi2s->Instance->CR2 |= SPI_CR2_RXDMAEN;
+    }
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2s);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Pauses the audio stream playing from the Media.
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval HAL status
+  */
+__weak HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s)
+{
+  /* Process Locked */
+  __HAL_LOCK(hi2s);
+
+  if(hi2s->State == HAL_I2S_STATE_BUSY_TX)
+  {
+    /* Disable the I2S DMA Tx request */
+    hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
+  }
+  else if(hi2s->State == HAL_I2S_STATE_BUSY_RX)
+  {
+    /* Disable the I2S DMA Rx request */
+    hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
+  }
+  else if(hi2s->State == HAL_I2S_STATE_BUSY_TX_RX)
+  {
+    if((hi2s->Init.Mode == I2S_MODE_SLAVE_TX)||(hi2s->Init.Mode == I2S_MODE_MASTER_TX))
+    {
+      /* Disable the I2S DMA Tx request */
+      hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
+    }
+    else
+    {
+      /* Disable the I2S DMA Rx request */
+      hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
+    }
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hi2s);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief Resumes the audio stream playing from the Media.
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval HAL status
+  */
+__weak HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s)
+{
+  /* Process Locked */
+  __HAL_LOCK(hi2s);
+
+  if(hi2s->State == HAL_I2S_STATE_BUSY_TX)
+  {
+    /* Enable the I2S DMA Tx request */
+    hi2s->Instance->CR2 |= SPI_CR2_TXDMAEN;
+  }
+  else if(hi2s->State == HAL_I2S_STATE_BUSY_RX)
+  {
+    /* Enable the I2S DMA Rx request */
+    hi2s->Instance->CR2 |= SPI_CR2_RXDMAEN;
+  }
+  else if(hi2s->State == HAL_I2S_STATE_BUSY_TX_RX)
+  {
+    if((hi2s->Init.Mode == I2S_MODE_SLAVE_TX)||(hi2s->Init.Mode == I2S_MODE_MASTER_TX))
+    {
+      /* Enable the I2S DMA Tx request */
+      hi2s->Instance->CR2 |= SPI_CR2_TXDMAEN;
+    }
+    else
+    {
+      /* Enable the I2S DMA Rx request */
+      hi2s->Instance->CR2 |= SPI_CR2_RXDMAEN;
+    }
+  }
+
+  /* If the I2S peripheral is still not enabled, enable it */
+  if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) == 0)
+  {
+    /* Enable I2S peripheral */
+    __HAL_I2S_ENABLE(hi2s);
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hi2s);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief Resumes the audio stream playing from the Media.
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval HAL status
+  */
+__weak HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s)
+{
+  /* Process Locked */
+  __HAL_LOCK(hi2s);
+
+  /* Disable the I2S Tx/Rx DMA requests */
+  hi2s->Instance->CR2 &= ~SPI_CR2_TXDMAEN;
+  hi2s->Instance->CR2 &= ~SPI_CR2_RXDMAEN;
+
+  /* Abort the I2S DMA Stream tx */
+  if(hi2s->hdmatx != NULL)
+  {
+    HAL_DMA_Abort(hi2s->hdmatx);
+  }
+  /* Abort the I2S DMA Stream rx */
+  if(hi2s->hdmarx != NULL)
+  {
+    HAL_DMA_Abort(hi2s->hdmarx);
+  }
+
+  /* Disable I2S peripheral */
+  __HAL_I2S_DISABLE(hi2s);
+
+  hi2s->State = HAL_I2S_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hi2s);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  This function handles I2S interrupt request.
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval None
+  */
+__weak void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s)
+{
+  uint32_t tmp1 = 0, tmp2 = 0;
+
+    if(hi2s->State == HAL_I2S_STATE_BUSY_RX)
+    {
+      tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_RXNE);
+      tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_RXNE);
+      /* I2S in mode Receiver ------------------------------------------------*/
+      if((tmp1 != RESET) && (tmp2 != RESET))
+      {
+        I2S_Receive_IT(hi2s);
+      }
+
+      tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_OVR);
+      tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_ERR);
+      /* I2S Overrun error interrupt occurred ---------------------------------*/
+      if((tmp1 != RESET) && (tmp2 != RESET))
+      {
+        __HAL_I2S_CLEAR_OVRFLAG(hi2s);
+        hi2s->ErrorCode |= HAL_I2S_ERROR_OVR;
+      }
+    }
+
+    if(hi2s->State == HAL_I2S_STATE_BUSY_TX)
+    {
+      tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_TXE);
+      tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_TXE);
+      /* I2S in mode Transmitter -----------------------------------------------*/
+      if((tmp1 != RESET) && (tmp2 != RESET))
+      {
+        I2S_Transmit_IT(hi2s);
+      }
+
+      tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_UDR);
+      tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_ERR);
+      /* I2S Underrun error interrupt occurred --------------------------------*/
+      if((tmp1 != RESET) && (tmp2 != RESET))
+      {
+        __HAL_I2S_CLEAR_UDRFLAG(hi2s);
+        hi2s->ErrorCode |= HAL_I2S_ERROR_UDR;
+    }
+  }
+
+  /* Call the Error call Back in case of Errors */
+  if(hi2s->ErrorCode != HAL_I2S_ERROR_NONE)
+  {
+    /* Set the I2S state ready to be able to start again the process */
+    hi2s->State= HAL_I2S_STATE_READY;
+    HAL_I2S_ErrorCallback(hi2s);
+  }
+}
+
+/**
+  * @brief Tx Transfer Half completed callbacks
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval None
+  */
+ __weak void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_I2S_TxHalfCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief Tx Transfer completed callbacks
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval None
+  */
+ __weak void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_I2S_TxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief Rx Transfer half completed callbacks
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval None
+  */
+__weak void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_I2S_RxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief Rx Transfer completed callbacks
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval None
+  */
+__weak void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_I2S_RxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief I2S error callbacks
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval None
+  */
+ __weak void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_I2S_ErrorCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Exported_Functions_Group3 Peripheral State and Errors functions
+  *  @brief   Peripheral State functions
+@verbatim
+ ===============================================================================
+                      ##### Peripheral State and Errors functions #####
+ ===============================================================================
+    [..]
+    This subsection permits to get in run-time the status of the peripheral
+    and the data flow.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Return the I2S state
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval HAL state
+  */
+HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s)
+{
+  return hi2s->State;
+}
+
+/**
+  * @brief  Return the I2S error code
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval I2S Error Code
+  */
+uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s)
+{
+  return hi2s->ErrorCode;
+}
+/**
+  * @}
+  */
+
+/**
+  * @brief DMA I2S transmit process half complete callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+ void I2S_DMATxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+  I2S_HandleTypeDef* hi2s = (I2S_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  HAL_I2S_TxHalfCpltCallback(hi2s);
+}
+
+/**
+  * @brief DMA I2S receive process half complete callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+void I2S_DMARxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+  I2S_HandleTypeDef* hi2s = (I2S_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  HAL_I2S_RxHalfCpltCallback(hi2s);
+}
+
+/**
+  * @brief DMA I2S communication error callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+void I2S_DMAError(DMA_HandleTypeDef *hdma)
+{
+  I2S_HandleTypeDef* hi2s = (I2S_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  hi2s->TxXferCount = 0;
+  hi2s->RxXferCount = 0;
+
+  hi2s->State= HAL_I2S_STATE_READY;
+
+  hi2s->ErrorCode |= HAL_I2S_ERROR_DMA;
+  HAL_I2S_ErrorCallback(hi2s);
+}
+
+/**
+  * @brief Transmit an amount of data in non-blocking mode with Interrupt
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef I2S_Transmit_IT(I2S_HandleTypeDef *hi2s)
+{
+ if(hi2s->State == HAL_I2S_STATE_BUSY_TX)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hi2s);
+
+    /* Transmit data */
+    hi2s->Instance->DR = (*hi2s->pTxBuffPtr++);
+
+    hi2s->TxXferCount--;
+
+    if(hi2s->TxXferCount == 0)
+    {
+      /* Disable TXE and ERR interrupt */
+      __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR));
+
+      hi2s->State = HAL_I2S_STATE_READY;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2s);
+      HAL_I2S_TxCpltCallback(hi2s);
+    }
+    else
+    {
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2s);
+    }
+
+    return HAL_OK;
+  }
+
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Receive an amount of data in non-blocking mode with Interrupt
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef I2S_Receive_IT(I2S_HandleTypeDef *hi2s)
+{
+  if(hi2s->State == HAL_I2S_STATE_BUSY_RX)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hi2s);
+
+    /* Receive data */
+    (*hi2s->pRxBuffPtr++) = hi2s->Instance->DR;
+
+    hi2s->RxXferCount--;
+
+    /* Check if Master Receiver mode is selected */
+    if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX)
+    {
+      /* Clear the Overrun Flag by a read operation on the SPI_DR register followed by a read
+      access to the SPI_SR register. */
+      __HAL_I2S_CLEAR_OVRFLAG(hi2s);
+    }
+
+    if(hi2s->RxXferCount == 0)
+    {
+      /* Disable RXNE and ERR interrupt */
+      __HAL_I2S_DISABLE_IT(hi2s, I2S_IT_RXNE | I2S_IT_ERR);
+
+      hi2s->State = HAL_I2S_STATE_READY;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2s);
+
+      HAL_I2S_RxCpltCallback(hi2s);
+    }
+    else
+    {
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2s);
+    }
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief This function handles I2S Communication Timeout.
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @param Flag: Flag checked
+  * @param Status: Value of the flag expected
+  * @param Timeout: Duration of the timeout
+  * @retval HAL status
+  */
+HAL_StatusTypeDef I2S_WaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s, uint32_t Flag, uint32_t Status, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait until flag is set */
+  if(Status == RESET)
+  {
+    while(__HAL_I2S_GET_FLAG(hi2s, Flag) == RESET)
+    {
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Set the I2S State ready */
+          hi2s->State= HAL_I2S_STATE_READY;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hi2s);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  else
+  {
+    while(__HAL_I2S_GET_FLAG(hi2s, Flag) != RESET)
+    {
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Set the I2S State ready */
+          hi2s->State= HAL_I2S_STATE_READY;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hi2s);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+#endif /* HAL_I2S_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/