Based on user/ft/stm32-dev-bridge, without the project-specific build

directories (and duplicated code).

1 files changed, 3813 insertions, 0 deletions

diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cryp.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cryp.c
new file mode 100644
index 0000000..7458dfd
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cryp.c
@@ -0,0 +1,3813 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_cryp.c
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   CRYP HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the Cryptography (CRYP) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + AES processing functions
+  *           + DES processing functions
+  *           + TDES processing functions
+  *           + DMA callback functions
+  *           + CRYP IRQ handler management
+  *           + Peripheral State functions
+  *
+  @verbatim
+  ==============================================================================
+                     ##### How to use this driver #####
+  ==============================================================================
+    [..]
+      The CRYP HAL driver can be used as follows:
+
+      (#)Initialize the CRYP low level resources by implementing the HAL_CRYP_MspInit():
+         (##) Enable the CRYP interface clock using __HAL_RCC_CRYP_CLK_ENABLE()
+         (##) In case of using interrupts (e.g. HAL_CRYP_AESECB_Encrypt_IT())
+             (+++) Configure the CRYP interrupt priority using HAL_NVIC_SetPriority()
+             (+++) Enable the CRYP IRQ handler using HAL_NVIC_EnableIRQ()
+             (+++) In CRYP IRQ handler, call HAL_CRYP_IRQHandler()
+         (##) In case of using DMA to control data transfer (e.g. HAL_CRYP_AESECB_Encrypt_DMA())
+             (+++) Enable the DMAx interface clock using __DMAx_CLK_ENABLE()
+             (+++) Configure and enable two DMA streams one for managing data transfer from
+                 memory to peripheral (input stream) and another stream for managing data
+                 transfer from peripheral to memory (output stream)
+             (+++) Associate the initialized DMA handle to the CRYP DMA handle
+                 using  __HAL_LINKDMA()
+             (+++) Configure the priority and enable the NVIC for the transfer complete
+                 interrupt on the two DMA Streams. The output stream should have higher
+                 priority than the input stream HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ()
+
+      (#)Initialize the CRYP HAL using HAL_CRYP_Init(). This function configures mainly:
+         (##) The data type: 1-bit, 8-bit, 16-bit and 32-bit
+         (##) The key size: 128, 192 and 256. This parameter is relevant only for AES
+         (##) The encryption/decryption key. It's size depends on the algorithm
+              used for encryption/decryption
+         (##) The initialization vector (counter). It is not used ECB mode.
+
+      (#)Three processing (encryption/decryption) functions are available:
+         (##) Polling mode: encryption and decryption APIs are blocking functions
+              i.e. they process the data and wait till the processing is finished,
+              e.g. HAL_CRYP_AESCBC_Encrypt()
+         (##) Interrupt mode: encryption and decryption APIs are not blocking functions
+              i.e. they process the data under interrupt,
+              e.g. HAL_CRYP_AESCBC_Encrypt_IT()
+         (##) DMA mode: encryption and decryption APIs are not blocking functions
+              i.e. the data transfer is ensured by DMA,
+              e.g. HAL_CRYP_AESCBC_Encrypt_DMA()
+
+      (#)When the processing function is called at first time after HAL_CRYP_Init()
+         the CRYP peripheral is initialized and processes the buffer in input.
+         At second call, the processing function performs an append of the already
+         processed buffer.
+         When a new data block is to be processed, call HAL_CRYP_Init() then the
+         processing function.
+
+       (#)Call HAL_CRYP_DeInit() to deinitialize the CRYP peripheral.
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup CRYP CRYP
+  * @brief CRYP HAL module driver.
+  * @{
+  */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+
+#if defined(STM32F415xx) || defined(STM32F417xx) || defined(STM32F437xx) || defined(STM32F439xx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup CRYP_Private_define
+  * @{
+  */
+#define CRYP_TIMEOUT_VALUE  1
+/**
+  * @}
+  */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup CRYP_Private_Functions_prototypes
+  * @{
+  */
+static void CRYP_SetInitVector(CRYP_HandleTypeDef *hcryp, uint8_t *InitVector, uint32_t IVSize);
+static void CRYP_SetKey(CRYP_HandleTypeDef *hcryp, uint8_t *Key, uint32_t KeySize);
+static HAL_StatusTypeDef CRYP_ProcessData(CRYP_HandleTypeDef *hcryp, uint8_t* Input, uint16_t Ilength, uint8_t* Output, uint32_t Timeout);
+static HAL_StatusTypeDef CRYP_ProcessData2Words(CRYP_HandleTypeDef *hcryp, uint8_t* Input, uint16_t Ilength, uint8_t* Output, uint32_t Timeout);
+static void CRYP_DMAInCplt(DMA_HandleTypeDef *hdma);
+static void CRYP_DMAOutCplt(DMA_HandleTypeDef *hdma);
+static void CRYP_DMAError(DMA_HandleTypeDef *hdma);
+static void CRYP_SetDMAConfig(CRYP_HandleTypeDef *hcryp, uint32_t inputaddr, uint16_t Size, uint32_t outputaddr);
+static void CRYP_SetTDESECBMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction);
+static void CRYP_SetTDESCBCMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction);
+static void CRYP_SetDESECBMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction);
+static void CRYP_SetDESCBCMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction);
+/**
+  * @}
+  */
+
+
+/* Private functions ---------------------------------------------------------*/
+
+/** @addtogroup CRYP_Private_Functions
+  * @{
+  */
+
+
+/**
+  * @brief  DMA CRYP Input Data process complete callback.
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void CRYP_DMAInCplt(DMA_HandleTypeDef *hdma)
+{
+  CRYP_HandleTypeDef* hcryp = (CRYP_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  /* Disable the DMA transfer for input FIFO request by resetting the DIEN bit
+     in the DMACR register */
+  hcryp->Instance->DMACR &= (uint32_t)(~CRYP_DMACR_DIEN);
+
+  /* Call input data transfer complete callback */
+  HAL_CRYP_InCpltCallback(hcryp);
+}
+
+/**
+  * @brief  DMA CRYP Output Data process complete callback.
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void CRYP_DMAOutCplt(DMA_HandleTypeDef *hdma)
+{
+  CRYP_HandleTypeDef* hcryp = (CRYP_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  /* Disable the DMA transfer for output FIFO request by resetting the DOEN bit
+     in the DMACR register */
+  hcryp->Instance->DMACR &= (uint32_t)(~CRYP_DMACR_DOEN);
+
+  /* Disable CRYP */
+  __HAL_CRYP_DISABLE(hcryp);
+
+  /* Change the CRYP state to ready */
+  hcryp->State = HAL_CRYP_STATE_READY;
+
+  /* Call output data transfer complete callback */
+  HAL_CRYP_OutCpltCallback(hcryp);
+}
+
+/**
+  * @brief  DMA CRYP communication error callback.
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void CRYP_DMAError(DMA_HandleTypeDef *hdma)
+{
+  CRYP_HandleTypeDef* hcryp = (CRYP_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+  hcryp->State= HAL_CRYP_STATE_READY;
+  HAL_CRYP_ErrorCallback(hcryp);
+}
+
+/**
+  * @brief  Writes the Key in Key registers.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  Key: Pointer to Key buffer
+  * @param  KeySize: Size of Key
+  * @retval None
+  */
+static void CRYP_SetKey(CRYP_HandleTypeDef *hcryp, uint8_t *Key, uint32_t KeySize)
+{
+  uint32_t keyaddr = (uint32_t)Key;
+
+  switch(KeySize)
+  {
+  case CRYP_KEYSIZE_256B:
+    /* Key Initialisation */
+    hcryp->Instance->K0LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K0RR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K1LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K1RR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K2LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K2RR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K3LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K3RR = __REV(*(uint32_t*)(keyaddr));
+    break;
+  case CRYP_KEYSIZE_192B:
+    hcryp->Instance->K1LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K1RR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K2LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K2RR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K3LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K3RR = __REV(*(uint32_t*)(keyaddr));
+    break;
+  case CRYP_KEYSIZE_128B:
+    hcryp->Instance->K2LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K2RR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K3LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K3RR = __REV(*(uint32_t*)(keyaddr));
+    break;
+  default:
+    break;
+  }
+}
+
+/**
+  * @brief  Writes the InitVector/InitCounter in IV registers.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  InitVector: Pointer to InitVector/InitCounter buffer
+  * @param  IVSize: Size of the InitVector/InitCounter
+  * @retval None
+  */
+static void CRYP_SetInitVector(CRYP_HandleTypeDef *hcryp, uint8_t *InitVector, uint32_t IVSize)
+{
+  uint32_t ivaddr = (uint32_t)InitVector;
+
+  switch(IVSize)
+  {
+  case CRYP_KEYSIZE_128B:
+    hcryp->Instance->IV0LR = __REV(*(uint32_t*)(ivaddr));
+    ivaddr+=4;
+    hcryp->Instance->IV0RR = __REV(*(uint32_t*)(ivaddr));
+    ivaddr+=4;
+    hcryp->Instance->IV1LR = __REV(*(uint32_t*)(ivaddr));
+    ivaddr+=4;
+    hcryp->Instance->IV1RR = __REV(*(uint32_t*)(ivaddr));
+    break;
+    /* Whatever key size 192 or 256, Init vector is written in IV0LR and IV0RR */
+  case CRYP_KEYSIZE_192B:
+    hcryp->Instance->IV0LR = __REV(*(uint32_t*)(ivaddr));
+    ivaddr+=4;
+    hcryp->Instance->IV0RR = __REV(*(uint32_t*)(ivaddr));
+    break;
+  case CRYP_KEYSIZE_256B:
+    hcryp->Instance->IV0LR = __REV(*(uint32_t*)(ivaddr));
+    ivaddr+=4;
+    hcryp->Instance->IV0RR = __REV(*(uint32_t*)(ivaddr));
+    break;
+  default:
+    break;
+  }
+}
+
+/**
+  * @brief  Process Data: Writes Input data in polling mode and read the output data
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  Input: Pointer to the Input buffer
+  * @param  Ilength: Length of the Input buffer, must be a multiple of 16.
+  * @param  Output: Pointer to the returned buffer
+  * @param  Timeout: Timeout value
+  *     * @retval None
+  */
+static HAL_StatusTypeDef CRYP_ProcessData(CRYP_HandleTypeDef *hcryp, uint8_t* Input, uint16_t Ilength, uint8_t* Output, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  uint32_t i = 0;
+  uint32_t inputaddr  = (uint32_t)Input;
+  uint32_t outputaddr = (uint32_t)Output;
+
+  for(i=0; (i < Ilength); i+=16)
+  {
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR  = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_OFNE))
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+  }
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Process Data: Write Input data in polling mode.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  Input: Pointer to the Input buffer
+  * @param  Ilength: Length of the Input buffer, must be a multiple of 8
+  * @param  Output: Pointer to the returned buffer
+  * @param  Timeout: Specify Timeout value
+  * @retval None
+  */
+static HAL_StatusTypeDef CRYP_ProcessData2Words(CRYP_HandleTypeDef *hcryp, uint8_t* Input, uint16_t Ilength, uint8_t* Output, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  uint32_t i = 0;
+  uint32_t inputaddr  = (uint32_t)Input;
+  uint32_t outputaddr = (uint32_t)Output;
+
+  for(i=0; (i < Ilength); i+=8)
+  {
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR  = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_OFNE))
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+  }
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Set the DMA configuration and start the DMA transfer
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  inputaddr: address of the Input buffer
+  * @param  Size: Size of the Input buffer, must be a multiple of 16.
+  * @param  outputaddr: address of the Output buffer
+  * @retval None
+  */
+static void CRYP_SetDMAConfig(CRYP_HandleTypeDef *hcryp, uint32_t inputaddr, uint16_t Size, uint32_t outputaddr)
+{
+  /* Set the CRYP DMA transfer complete callback */
+  hcryp->hdmain->XferCpltCallback = CRYP_DMAInCplt;
+  /* Set the DMA error callback */
+  hcryp->hdmain->XferErrorCallback = CRYP_DMAError;
+
+  /* Set the CRYP DMA transfer complete callback */
+  hcryp->hdmaout->XferCpltCallback = CRYP_DMAOutCplt;
+  /* Set the DMA error callback */
+  hcryp->hdmaout->XferErrorCallback = CRYP_DMAError;
+
+  /* Enable CRYP */
+  __HAL_CRYP_ENABLE(hcryp);
+
+  /* Enable the DMA In DMA Stream */
+  HAL_DMA_Start_IT(hcryp->hdmain, inputaddr, (uint32_t)&hcryp->Instance->DR, Size/4);
+
+  /* Enable In DMA request */
+  hcryp->Instance->DMACR = (CRYP_DMACR_DIEN);
+
+  /* Enable the DMA Out DMA Stream */
+  HAL_DMA_Start_IT(hcryp->hdmaout, (uint32_t)&hcryp->Instance->DOUT, outputaddr, Size/4);
+
+  /* Enable Out DMA request */
+  hcryp->Instance->DMACR |= CRYP_DMACR_DOEN;
+
+}
+
+/**
+  * @brief  Sets the CRYP peripheral in DES ECB mode.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  Direction: Encryption or decryption
+  * @retval None
+  */
+static void CRYP_SetDESECBMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction)
+{
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /* Set the CRYP peripheral in AES ECB mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_DES_ECB | Direction);
+
+    /* Set the key */
+    hcryp->Instance->K1LR = __REV(*(uint32_t*)(hcryp->Init.pKey));
+    hcryp->Instance->K1RR = __REV(*(uint32_t*)(hcryp->Init.pKey+4));
+
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+    /* Set the phase */
+    hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+}
+
+/**
+  * @brief  Sets the CRYP peripheral in DES CBC mode.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  Direction: Encryption or decryption
+  * @retval None
+  */
+static void CRYP_SetDESCBCMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction)
+{
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /* Set the CRYP peripheral in AES ECB mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_DES_CBC | Direction);
+
+    /* Set the key */
+    hcryp->Instance->K1LR = __REV(*(uint32_t*)(hcryp->Init.pKey));
+    hcryp->Instance->K1RR = __REV(*(uint32_t*)(hcryp->Init.pKey+4));
+
+    /* Set the Initialization Vector */
+    CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_256B);
+
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+    /* Set the phase */
+    hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+}
+
+/**
+  * @brief  Sets the CRYP peripheral in TDES ECB mode.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  Direction: Encryption or decryption
+  * @retval None
+  */
+static void CRYP_SetTDESECBMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction)
+{
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /* Set the CRYP peripheral in AES ECB mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_TDES_ECB | Direction);
+
+    /* Set the key */
+    CRYP_SetKey(hcryp, hcryp->Init.pKey, CRYP_KEYSIZE_192B);
+
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+    /* Set the phase */
+    hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+}
+
+/**
+  * @brief  Sets the CRYP peripheral in TDES CBC mode
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  Direction: Encryption or decryption
+  * @retval None
+  */
+static void CRYP_SetTDESCBCMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction)
+{
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /* Set the CRYP peripheral in AES CBC mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_TDES_CBC | Direction);
+
+    /* Set the key */
+    CRYP_SetKey(hcryp, hcryp->Init.pKey, CRYP_KEYSIZE_192B);
+
+    /* Set the Initialization Vector */
+    CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_256B);
+
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+    /* Set the phase */
+    hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+}
+
+/**
+  * @}
+  */
+
+ /* Exported functions --------------------------------------------------------*/
+/** @addtogroup CRYP_Exported_Functions
+  * @{
+  */
+
+/** @defgroup CRYP_Exported_Functions_Group1 Initialization and de-initialization functions
+ *  @brief    Initialization and Configuration functions.
+ *
+@verbatim
+  ==============================================================================
+              ##### Initialization and de-initialization functions #####
+  ==============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Initialize the CRYP according to the specified parameters
+          in the CRYP_InitTypeDef and creates the associated handle
+      (+) DeInitialize the CRYP peripheral
+      (+) Initialize the CRYP MSP
+      (+) DeInitialize CRYP MSP
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the CRYP according to the specified
+  *         parameters in the CRYP_InitTypeDef and creates the associated handle.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_Init(CRYP_HandleTypeDef *hcryp)
+{
+  /* Check the CRYP handle allocation */
+  if(hcryp == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_CRYP_KEYSIZE(hcryp->Init.KeySize));
+  assert_param(IS_CRYP_DATATYPE(hcryp->Init.DataType));
+
+  if(hcryp->State == HAL_CRYP_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hcryp->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware */
+    HAL_CRYP_MspInit(hcryp);
+  }
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+
+  /* Set the key size and data type*/
+  CRYP->CR = (uint32_t) (hcryp->Init.KeySize | hcryp->Init.DataType);
+
+  /* Reset CrypInCount and CrypOutCount */
+  hcryp->CrypInCount = 0;
+  hcryp->CrypOutCount = 0;
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+
+  /* Set the default CRYP phase */
+  hcryp->Phase = HAL_CRYP_PHASE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the CRYP peripheral.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_DeInit(CRYP_HandleTypeDef *hcryp)
+{
+  /* Check the CRYP handle allocation */
+  if(hcryp == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+
+  /* Set the default CRYP phase */
+  hcryp->Phase = HAL_CRYP_PHASE_READY;
+
+  /* Reset CrypInCount and CrypOutCount */
+  hcryp->CrypInCount = 0;
+  hcryp->CrypOutCount = 0;
+
+  /* Disable the CRYP Peripheral Clock */
+  __HAL_CRYP_DISABLE(hcryp);
+
+  /* DeInit the low level hardware: CLOCK, NVIC.*/
+  HAL_CRYP_MspDeInit(hcryp);
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hcryp);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP MSP.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @retval None
+  */
+__weak void HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_CRYP_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes CRYP MSP.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @retval None
+  */
+__weak void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_CRYP_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup CRYP_Exported_Functions_Group2 AES processing functions
+ *  @brief   processing functions.
+ *
+@verbatim
+  ==============================================================================
+                      ##### AES processing functions #####
+  ==============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Encrypt plaintext using AES-128/192/256 using chaining modes
+      (+) Decrypt cyphertext using AES-128/192/256 using chaining modes
+    [..]  Three processing functions are available:
+      (+) Polling mode
+      (+) Interrupt mode
+      (+) DMA mode
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES ECB encryption mode
+  *         then encrypt pPlainData. The cypher data are available in pCypherData
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16.
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Timeout: Specify Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /* Set the key */
+    CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+    /* Set the CRYP peripheral in AES ECB mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB);
+
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Set the phase */
+    hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+
+    /* Write Plain Data and Get Cypher Data */
+    if(CRYP_ProcessData(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CBC encryption mode
+  *         then encrypt pPlainData. The cypher data are available in pCypherData
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16.
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Timeout: Specify Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /* Set the key */
+    CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+    /* Set the CRYP peripheral in AES ECB mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC);
+
+    /* Set the Initialization Vector */
+    CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Set the phase */
+    hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+
+    /* Write Plain Data and Get Cypher Data */
+    if(CRYP_ProcessData(hcryp,pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CTR encryption mode
+  *         then encrypt pPlainData. The cypher data are available in pCypherData
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16.
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Timeout: Specify Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /* Set the key */
+    CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+    /* Set the CRYP peripheral in AES ECB mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR);
+
+    /* Set the Initialization Vector */
+    CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Set the phase */
+    hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+
+    /* Write Plain Data and Get Cypher Data */
+    if(CRYP_ProcessData(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES ECB decryption mode
+  *         then decrypted pCypherData. The cypher data are available in pPlainData
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16.
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Timeout: Specify Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
+{
+   uint32_t tickstart = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /* Set the key */
+    CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+    /* Set the CRYP peripheral in AES Key mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_KEY | CRYP_CR_ALGODIR);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    while(HAL_IS_BIT_SET(hcryp->Instance->SR, CRYP_FLAG_BUSY))
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+
+    /* Disable CRYP */
+    __HAL_CRYP_DISABLE(hcryp);
+
+    /* Reset the ALGOMODE bits*/
+    CRYP->CR &= (uint32_t)(~CRYP_CR_ALGOMODE);
+
+    /* Set the CRYP peripheral in AES ECB decryption mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB | CRYP_CR_ALGODIR);
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Set the phase */
+    hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+
+    /* Write Plain Data and Get Cypher Data */
+    if(CRYP_ProcessData(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES ECB decryption mode
+  *         then decrypted pCypherData. The cypher data are available in pPlainData
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16.
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Timeout: Specify Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /* Set the key */
+    CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+    /* Set the CRYP peripheral in AES Key mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_KEY | CRYP_CR_ALGODIR);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    while(HAL_IS_BIT_SET(hcryp->Instance->SR, CRYP_FLAG_BUSY))
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+
+    /* Reset the ALGOMODE bits*/
+    CRYP->CR &= (uint32_t)(~CRYP_CR_ALGOMODE);
+
+    /* Set the CRYP peripheral in AES CBC decryption mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC | CRYP_CR_ALGODIR);
+
+    /* Set the Initialization Vector */
+    CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Set the phase */
+    hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+
+    /* Write Plain Data and Get Cypher Data */
+    if(CRYP_ProcessData(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CTR decryption mode
+  *         then decrypted pCypherData. The cypher data are available in pPlainData
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16.
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Timeout: Specify Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
+{
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Set the key */
+    CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+    /* Set the CRYP peripheral in AES CTR mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR | CRYP_CR_ALGODIR);
+
+    /* Set the Initialization Vector */
+    CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Set the phase */
+    hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+
+    /* Write Plain Data and Get Cypher Data */
+    if(CRYP_ProcessData(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES ECB encryption mode using Interrupt.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16 bytes
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pPlainData;
+    hcryp->pCrypOutBuffPtr = pCypherData;
+    hcryp->CrypOutCount = Size;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /* Set the key */
+      CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+      /* Set the CRYP peripheral in AES ECB mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB);
+
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+     /* Set the phase */
+     hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR  = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    hcryp->pCrypInBuffPtr += 16;
+    hcryp->CrypInCount -= 16;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    hcryp->pCrypOutBuffPtr += 16;
+    hcryp->CrypOutCount -= 16;
+    if(hcryp->CrypOutCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Process Locked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CBC encryption mode using Interrupt.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16 bytes
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pPlainData;
+    hcryp->pCrypOutBuffPtr = pCypherData;
+    hcryp->CrypOutCount = Size;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /* Set the key */
+      CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+      /* Set the CRYP peripheral in AES CBC mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC);
+
+      /* Set the Initialization Vector */
+      CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+     /* Set the phase */
+     hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR  = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    hcryp->pCrypInBuffPtr += 16;
+    hcryp->CrypInCount -= 16;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    hcryp->pCrypOutBuffPtr += 16;
+    hcryp->CrypOutCount -= 16;
+    if(hcryp->CrypOutCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Process Locked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CTR encryption mode using Interrupt.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16 bytes
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pPlainData;
+    hcryp->pCrypOutBuffPtr = pCypherData;
+    hcryp->CrypOutCount = Size;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /* Set the key */
+      CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+      /* Set the CRYP peripheral in AES CTR mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR);
+
+      /* Set the Initialization Vector */
+      CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+     /* Set the phase */
+     hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR  = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    hcryp->pCrypInBuffPtr += 16;
+    hcryp->CrypInCount -= 16;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    hcryp->pCrypOutBuffPtr += 16;
+    hcryp->CrypOutCount -= 16;
+    if(hcryp->CrypOutCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES ECB decryption mode using Interrupt.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16.
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t tickstart = 0;
+
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pCypherData;
+    hcryp->pCrypOutBuffPtr = pPlainData;
+    hcryp->CrypOutCount = Size;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /* Set the key */
+    CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+    /* Set the CRYP peripheral in AES Key mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_KEY | CRYP_CR_ALGODIR);
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    while(HAL_IS_BIT_SET(hcryp->Instance->SR, CRYP_FLAG_BUSY))
+    {
+      /* Check for the Timeout */
+      if((HAL_GetTick() - tickstart ) > CRYP_TIMEOUT_VALUE)
+      {
+        /* Change state */
+        hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hcryp);
+
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Reset the ALGOMODE bits*/
+    CRYP->CR &= (uint32_t)(~CRYP_CR_ALGOMODE);
+
+    /* Set the CRYP peripheral in AES ECB decryption mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB | CRYP_CR_ALGODIR);
+
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+     /* Set the phase */
+     hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR  = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    hcryp->pCrypInBuffPtr += 16;
+    hcryp->CrypInCount -= 16;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    hcryp->pCrypOutBuffPtr += 16;
+    hcryp->CrypOutCount -= 16;
+    if(hcryp->CrypOutCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CBC decryption mode using IT.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+
+  uint32_t tickstart = 0;
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    /* Get the buffer addresses and sizes */
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pCypherData;
+    hcryp->pCrypOutBuffPtr = pPlainData;
+    hcryp->CrypOutCount = Size;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /* Set the key */
+      CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+      /* Set the CRYP peripheral in AES Key mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_KEY | CRYP_CR_ALGODIR);
+
+      /* Enable CRYP */
+      __HAL_CRYP_ENABLE(hcryp);
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    while(HAL_IS_BIT_SET(hcryp->Instance->SR, CRYP_FLAG_BUSY))
+    {
+      /* Check for the Timeout */
+      if((HAL_GetTick() - tickstart ) > CRYP_TIMEOUT_VALUE)
+      {
+        /* Change state */
+        hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hcryp);
+
+        return HAL_TIMEOUT;
+      }
+    }
+
+      /* Reset the ALGOMODE bits*/
+      CRYP->CR &= (uint32_t)(~CRYP_CR_ALGOMODE);
+
+      /* Set the CRYP peripheral in AES CBC decryption mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC | CRYP_CR_ALGODIR);
+
+      /* Set the Initialization Vector */
+      CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+      /* Enable CRYP */
+      __HAL_CRYP_ENABLE(hcryp);
+
+      /* Set the phase */
+      hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR  = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    hcryp->pCrypInBuffPtr += 16;
+    hcryp->CrypInCount -= 16;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    hcryp->pCrypOutBuffPtr += 16;
+    hcryp->CrypOutCount -= 16;
+    if(hcryp->CrypOutCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CTR decryption mode using Interrupt.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    /* Get the buffer addresses and sizes */
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pCypherData;
+    hcryp->pCrypOutBuffPtr = pPlainData;
+    hcryp->CrypOutCount = Size;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /* Set the key */
+      CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+      /* Set the CRYP peripheral in AES CTR mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR | CRYP_CR_ALGODIR);
+
+      /* Set the Initialization Vector */
+      CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+      /* Set the phase */
+      hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR  = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    hcryp->pCrypInBuffPtr += 16;
+    hcryp->CrypInCount -= 16;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    hcryp->pCrypOutBuffPtr += 16;
+    hcryp->CrypOutCount -= 16;
+    if(hcryp->CrypOutCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES ECB encryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16 bytes
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    inputaddr  = (uint32_t)pPlainData;
+    outputaddr = (uint32_t)pCypherData;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /* Set the key */
+      CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+      /* Set the CRYP peripheral in AES ECB mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB);
+
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+     /* Set the phase */
+     hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+    /* Set the input and output addresses and start DMA transfer */
+    CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CBC encryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16.
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    inputaddr  = (uint32_t)pPlainData;
+    outputaddr = (uint32_t)pCypherData;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /* Set the key */
+      CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+      /* Set the CRYP peripheral in AES ECB mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC);
+
+      /* Set the Initialization Vector */
+      CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+       /* Set the phase */
+       hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+     }
+     /* Set the input and output addresses and start DMA transfer */
+     CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+     /* Process Unlocked */
+     __HAL_UNLOCK(hcryp);
+
+     /* Return function status */
+     return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CTR encryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16.
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    inputaddr  = (uint32_t)pPlainData;
+    outputaddr = (uint32_t)pCypherData;
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /* Set the key */
+      CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+      /* Set the CRYP peripheral in AES ECB mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR);
+
+      /* Set the Initialization Vector */
+      CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+       /* Set the phase */
+       hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+
+    /* Set the input and output addresses and start DMA transfer */
+    CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES ECB decryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16 bytes
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t tickstart = 0;
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    inputaddr  = (uint32_t)pCypherData;
+    outputaddr = (uint32_t)pPlainData;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+    /* Set the key */
+    CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+    /* Set the CRYP peripheral in AES Key mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_KEY | CRYP_CR_ALGODIR);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    while(HAL_IS_BIT_SET(hcryp->Instance->SR, CRYP_FLAG_BUSY))
+    {
+      /* Check for the Timeout */
+      if((HAL_GetTick() - tickstart ) > CRYP_TIMEOUT_VALUE)
+      {
+        /* Change state */
+        hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hcryp);
+
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Reset the ALGOMODE bits*/
+    CRYP->CR &= (uint32_t)(~CRYP_CR_ALGOMODE);
+
+    /* Set the CRYP peripheral in AES ECB decryption mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB | CRYP_CR_ALGODIR);
+
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+     /* Set the phase */
+     hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+
+    /* Set the input and output addresses and start DMA transfer */
+    CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+     /* Process Unlocked */
+     __HAL_UNLOCK(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CBC encryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16 bytes
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t tickstart = 0;
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    inputaddr  = (uint32_t)pCypherData;
+    outputaddr = (uint32_t)pPlainData;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /* Set the key */
+      CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+      /* Set the CRYP peripheral in AES Key mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_KEY | CRYP_CR_ALGODIR);
+
+      /* Enable CRYP */
+      __HAL_CRYP_ENABLE(hcryp);
+
+      /* Get tick */
+      tickstart = HAL_GetTick();
+
+      while(HAL_IS_BIT_SET(hcryp->Instance->SR, CRYP_FLAG_BUSY))
+      {
+        /* Check for the Timeout */
+        if((HAL_GetTick() - tickstart ) > CRYP_TIMEOUT_VALUE)
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+
+          return HAL_TIMEOUT;
+        }
+      }
+
+      /* Reset the ALGOMODE bits*/
+      CRYP->CR &= (uint32_t)(~CRYP_CR_ALGOMODE);
+
+      /* Set the CRYP peripheral in AES CBC decryption mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC | CRYP_CR_ALGODIR);
+
+      /* Set the Initialization Vector */
+      CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+      /* Set the phase */
+      hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+
+    /* Set the input and output addresses and start DMA transfer */
+    CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CTR decryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    inputaddr  = (uint32_t)pCypherData;
+    outputaddr = (uint32_t)pPlainData;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /* Set the key */
+      CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+
+      /* Set the CRYP peripheral in AES CTR mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR | CRYP_CR_ALGODIR);
+
+      /* Set the Initialization Vector */
+      CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+
+      /* Set the phase */
+      hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+
+    /* Set the input and output addresses and start DMA transfer */
+    CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+
+/**
+  * @}
+  */
+
+/** @defgroup CRYP_Exported_Functions_Group3 DES processing functions
+ *  @brief   processing functions.
+ *
+@verbatim
+  ==============================================================================
+                      ##### DES processing functions #####
+  ==============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Encrypt plaintext using DES using ECB or CBC chaining modes
+      (+) Decrypt cyphertext using ECB or CBC chaining modes
+    [..]  Three processing functions are available:
+      (+) Polling mode
+      (+) Interrupt mode
+      (+) DMA mode
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the CRYP peripheral in DES ECB encryption mode.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Timeout: Specify Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+
+  /* Set CRYP peripheral in DES ECB encryption mode */
+  CRYP_SetDESECBMode(hcryp, 0);
+
+  /* Enable CRYP */
+  __HAL_CRYP_ENABLE(hcryp);
+
+  /* Write Plain Data and Get Cypher Data */
+  if(CRYP_ProcessData2Words(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in DES ECB decryption mode.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Timeout: Specify Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+
+  /* Set CRYP peripheral in DES ECB decryption mode */
+  CRYP_SetDESECBMode(hcryp, CRYP_CR_ALGODIR);
+
+  /* Enable CRYP */
+  __HAL_CRYP_ENABLE(hcryp);
+
+  /* Write Plain Data and Get Cypher Data */
+  if(CRYP_ProcessData2Words(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in DES CBC encryption mode.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Timeout: Specify Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+
+  /* Set CRYP peripheral in DES CBC encryption mode */
+  CRYP_SetDESCBCMode(hcryp, 0);
+
+  /* Enable CRYP */
+  __HAL_CRYP_ENABLE(hcryp);
+
+  /* Write Plain Data and Get Cypher Data */
+  if(CRYP_ProcessData2Words(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in DES ECB decryption mode.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Timeout: Specify Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+
+  /* Set CRYP peripheral in DES CBC decryption mode */
+  CRYP_SetDESCBCMode(hcryp, CRYP_CR_ALGODIR);
+
+  /* Enable CRYP */
+  __HAL_CRYP_ENABLE(hcryp);
+
+  /* Write Plain Data and Get Cypher Data */
+  if(CRYP_ProcessData2Words(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in DES ECB encryption mode using IT.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pPlainData;
+    hcryp->pCrypOutBuffPtr = pCypherData;
+    hcryp->CrypOutCount = Size;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Set CRYP peripheral in DES ECB encryption mode */
+    CRYP_SetDESECBMode(hcryp, 0);
+
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+
+    hcryp->pCrypInBuffPtr += 8;
+    hcryp->CrypInCount -= 8;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+
+    hcryp->pCrypOutBuffPtr += 8;
+    hcryp->CrypOutCount -= 8;
+    if(hcryp->CrypOutCount == 0)
+    {
+      /* Disable IT */
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Disable CRYP */
+      __HAL_CRYP_DISABLE(hcryp);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in DES CBC encryption mode using interrupt.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pPlainData;
+    hcryp->pCrypOutBuffPtr = pCypherData;
+    hcryp->CrypOutCount = Size;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Set CRYP peripheral in DES CBC encryption mode */
+    CRYP_SetDESCBCMode(hcryp, 0);
+
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+
+    hcryp->pCrypInBuffPtr += 8;
+    hcryp->CrypInCount -= 8;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+
+    hcryp->pCrypOutBuffPtr += 8;
+    hcryp->CrypOutCount -= 8;
+    if(hcryp->CrypOutCount == 0)
+    {
+      /* Disable IT */
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Disable CRYP */
+      __HAL_CRYP_DISABLE(hcryp);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in DES ECB decryption mode using IT.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pCypherData;
+    hcryp->pCrypOutBuffPtr = pPlainData;
+    hcryp->CrypOutCount = Size;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Set CRYP peripheral in DES ECB decryption mode */
+    CRYP_SetDESECBMode(hcryp, CRYP_CR_ALGODIR);
+
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+
+    hcryp->pCrypInBuffPtr += 8;
+    hcryp->CrypInCount -= 8;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+
+    hcryp->pCrypOutBuffPtr += 8;
+    hcryp->CrypOutCount -= 8;
+    if(hcryp->CrypOutCount == 0)
+    {
+      /* Disable IT */
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Disable CRYP */
+      __HAL_CRYP_DISABLE(hcryp);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in DES ECB decryption mode using interrupt.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pCypherData;
+    hcryp->pCrypOutBuffPtr = pPlainData;
+    hcryp->CrypOutCount = Size;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Set CRYP peripheral in DES CBC decryption mode */
+    CRYP_SetDESCBCMode(hcryp, CRYP_CR_ALGODIR);
+
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+
+    hcryp->pCrypInBuffPtr += 8;
+    hcryp->CrypInCount -= 8;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+
+    hcryp->pCrypOutBuffPtr += 8;
+    hcryp->CrypOutCount -= 8;
+    if(hcryp->CrypOutCount == 0)
+    {
+      /* Disable IT */
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Disable CRYP */
+      __HAL_CRYP_DISABLE(hcryp);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in DES ECB encryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    inputaddr  = (uint32_t)pPlainData;
+    outputaddr = (uint32_t)pCypherData;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Set CRYP peripheral in DES ECB encryption mode */
+    CRYP_SetDESECBMode(hcryp, 0);
+
+    /* Set the input and output addresses and start DMA transfer */
+    CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in DES CBC encryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    inputaddr  = (uint32_t)pPlainData;
+    outputaddr = (uint32_t)pCypherData;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Set CRYP peripheral in DES CBC encryption mode */
+    CRYP_SetDESCBCMode(hcryp, 0);
+
+    /* Set the input and output addresses and start DMA transfer */
+    CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in DES ECB decryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    inputaddr  = (uint32_t)pCypherData;
+    outputaddr = (uint32_t)pPlainData;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Set CRYP peripheral in DES ECB decryption mode */
+    CRYP_SetDESECBMode(hcryp, CRYP_CR_ALGODIR);
+
+    /* Set the input and output addresses and start DMA transfer */
+    CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in DES ECB decryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    inputaddr  = (uint32_t)pCypherData;
+    outputaddr = (uint32_t)pPlainData;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Set CRYP peripheral in DES CBC decryption mode */
+    CRYP_SetDESCBCMode(hcryp, CRYP_CR_ALGODIR);
+
+    /* Set the input and output addresses and start DMA transfer */
+    CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup CRYP_Exported_Functions_Group4 TDES processing functions
+ *  @brief   processing functions.
+ *
+@verbatim
+  ==============================================================================
+                      ##### TDES processing functions #####
+  ==============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Encrypt plaintext using TDES based on ECB or CBC chaining modes
+      (+) Decrypt cyphertext using TDES based on ECB or CBC chaining modes
+    [..]  Three processing functions are available:
+      (+) Polling mode
+      (+) Interrupt mode
+      (+) DMA mode
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the CRYP peripheral in TDES ECB encryption mode
+  *         then encrypt pPlainData. The cypher data are available in pCypherData
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Timeout: Specify Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+
+  /* Set CRYP peripheral in TDES ECB encryption mode */
+  CRYP_SetTDESECBMode(hcryp, 0);
+
+  /* Enable CRYP */
+  __HAL_CRYP_ENABLE(hcryp);
+
+  /* Write Plain Data and Get Cypher Data */
+  if(CRYP_ProcessData2Words(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in TDES ECB decryption mode
+  *         then decrypted pCypherData. The cypher data are available in pPlainData
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Timeout: Specify Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
+{
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+
+  /* Set CRYP peripheral in TDES ECB decryption mode */
+  CRYP_SetTDESECBMode(hcryp, CRYP_CR_ALGODIR);
+
+  /* Enable CRYP */
+  __HAL_CRYP_ENABLE(hcryp);
+
+  /* Write Cypher Data and Get Plain Data */
+  if(CRYP_ProcessData2Words(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in TDES CBC encryption mode
+  *         then encrypt pPlainData. The cypher data are available in pCypherData
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Timeout: Specify Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+
+  /* Set CRYP peripheral in TDES CBC encryption mode */
+  CRYP_SetTDESCBCMode(hcryp, 0);
+
+  /* Enable CRYP */
+  __HAL_CRYP_ENABLE(hcryp);
+
+  /* Write Plain Data and Get Cypher Data */
+  if(CRYP_ProcessData2Words(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in TDES CBC decryption mode
+  *         then decrypted pCypherData. The cypher data are available in pPlainData
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Timeout: Specify Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
+{
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+
+  /* Set CRYP peripheral in TDES CBC decryption mode */
+  CRYP_SetTDESCBCMode(hcryp, CRYP_CR_ALGODIR);
+
+  /* Enable CRYP */
+  __HAL_CRYP_ENABLE(hcryp);
+
+  /* Write Cypher Data and Get Plain Data */
+  if(CRYP_ProcessData2Words(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in TDES ECB encryption mode using interrupt.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pPlainData;
+    hcryp->pCrypOutBuffPtr = pCypherData;
+    hcryp->CrypOutCount = Size;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Set CRYP peripheral in TDES ECB encryption mode */
+    CRYP_SetTDESECBMode(hcryp, 0);
+
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+
+    hcryp->pCrypInBuffPtr += 8;
+    hcryp->CrypInCount -= 8;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+
+    hcryp->pCrypOutBuffPtr += 8;
+    hcryp->CrypOutCount -= 8;
+    if(hcryp->CrypOutCount == 0)
+    {
+      /* Disable IT */
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Disable CRYP */
+      __HAL_CRYP_DISABLE(hcryp);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call the Output data transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in TDES CBC encryption mode.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pPlainData;
+    hcryp->pCrypOutBuffPtr = pCypherData;
+    hcryp->CrypOutCount = Size;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Set CRYP peripheral in TDES CBC encryption mode */
+    CRYP_SetTDESCBCMode(hcryp, 0);
+
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+
+    hcryp->pCrypInBuffPtr += 8;
+    hcryp->CrypInCount -= 8;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+
+    hcryp->pCrypOutBuffPtr += 8;
+    hcryp->CrypOutCount -= 8;
+    if(hcryp->CrypOutCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Disable CRYP */
+      __HAL_CRYP_DISABLE(hcryp);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in TDES ECB decryption mode.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pCypherData;
+    hcryp->pCrypOutBuffPtr = pPlainData;
+    hcryp->CrypOutCount = Size;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Set CRYP peripheral in TDES ECB decryption mode */
+    CRYP_SetTDESECBMode(hcryp, CRYP_CR_ALGODIR);
+
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+
+    hcryp->pCrypInBuffPtr += 8;
+    hcryp->CrypInCount -= 8;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+
+    hcryp->pCrypOutBuffPtr += 8;
+    hcryp->CrypOutCount -= 8;
+    if(hcryp->CrypOutCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Disable CRYP */
+      __HAL_CRYP_DISABLE(hcryp);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in TDES CBC decryption mode.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pCypherData;
+    hcryp->pCrypOutBuffPtr = pPlainData;
+    hcryp->CrypOutCount = Size;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Set CRYP peripheral in TDES CBC decryption mode */
+    CRYP_SetTDESCBCMode(hcryp, CRYP_CR_ALGODIR);
+
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+
+    hcryp->pCrypInBuffPtr += 8;
+    hcryp->CrypInCount -= 8;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+
+    hcryp->pCrypOutBuffPtr += 8;
+    hcryp->CrypOutCount -= 8;
+    if(hcryp->CrypOutCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Disable CRYP */
+      __HAL_CRYP_DISABLE(hcryp);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in TDES ECB encryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    inputaddr  = (uint32_t)pPlainData;
+    outputaddr = (uint32_t)pCypherData;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Set CRYP peripheral in TDES ECB encryption mode */
+    CRYP_SetTDESECBMode(hcryp, 0);
+
+    /* Set the input and output addresses and start DMA transfer */
+    CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in TDES CBC encryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    inputaddr  = (uint32_t)pPlainData;
+    outputaddr = (uint32_t)pCypherData;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Set CRYP peripheral in TDES CBC encryption mode */
+    CRYP_SetTDESCBCMode(hcryp, 0);
+
+    /* Set the input and output addresses and start DMA transfer */
+    CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in TDES ECB decryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    inputaddr  = (uint32_t)pCypherData;
+    outputaddr = (uint32_t)pPlainData;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Set CRYP peripheral in TDES ECB decryption mode */
+    CRYP_SetTDESECBMode(hcryp, CRYP_CR_ALGODIR);
+
+    /* Set the input and output addresses and start DMA transfer */
+    CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in TDES CBC decryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+
+    inputaddr  = (uint32_t)pCypherData;
+    outputaddr = (uint32_t)pPlainData;
+
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+
+    /* Set CRYP peripheral in TDES CBC decryption mode */
+    CRYP_SetTDESCBCMode(hcryp, CRYP_CR_ALGODIR);
+
+    /* Set the input and output addresses and start DMA transfer */
+    CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hcryp);
+
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup CRYP_Exported_Functions_Group5 DMA callback functions
+ *  @brief   DMA callback functions.
+ *
+@verbatim
+  ==============================================================================
+                      ##### DMA callback functions  #####
+  ==============================================================================
+    [..]  This section provides DMA callback functions:
+      (+) DMA Input data transfer complete
+      (+) DMA Output data transfer complete
+      (+) DMA error
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Input FIFO transfer completed callbacks.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @retval None
+  */
+__weak void HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_CRYP_InCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Output FIFO transfer completed callbacks.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @retval None
+  */
+__weak void HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_CRYP_OutCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  CRYP error callbacks.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @retval None
+  */
+ __weak void HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_CRYP_ErrorCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup CRYP_Exported_Functions_Group6 CRYP IRQ handler management
+ *  @brief   CRYP IRQ handler.
+ *
+@verbatim
+  ==============================================================================
+                ##### CRYP IRQ handler management #####
+  ==============================================================================
+[..]  This section provides CRYP IRQ handler function.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  This function handles CRYP interrupt request.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @retval None
+  */
+void HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp)
+{
+  switch(CRYP->CR & CRYP_CR_ALGOMODE_DIRECTION)
+  {
+  case CRYP_CR_ALGOMODE_TDES_ECB_ENCRYPT:
+    HAL_CRYP_TDESECB_Encrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+
+  case CRYP_CR_ALGOMODE_TDES_ECB_DECRYPT:
+    HAL_CRYP_TDESECB_Decrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+
+  case CRYP_CR_ALGOMODE_TDES_CBC_ENCRYPT:
+    HAL_CRYP_TDESCBC_Encrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+
+  case CRYP_CR_ALGOMODE_TDES_CBC_DECRYPT:
+    HAL_CRYP_TDESCBC_Decrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+
+  case CRYP_CR_ALGOMODE_DES_ECB_ENCRYPT:
+    HAL_CRYP_DESECB_Encrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+
+  case CRYP_CR_ALGOMODE_DES_ECB_DECRYPT:
+    HAL_CRYP_DESECB_Decrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+
+  case CRYP_CR_ALGOMODE_DES_CBC_ENCRYPT:
+    HAL_CRYP_DESCBC_Encrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+
+  case CRYP_CR_ALGOMODE_DES_CBC_DECRYPT:
+    HAL_CRYP_DESCBC_Decrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+
+  case CRYP_CR_ALGOMODE_AES_ECB_ENCRYPT:
+    HAL_CRYP_AESECB_Encrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+
+  case CRYP_CR_ALGOMODE_AES_ECB_DECRYPT:
+    HAL_CRYP_AESECB_Decrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+
+  case CRYP_CR_ALGOMODE_AES_CBC_ENCRYPT:
+    HAL_CRYP_AESCBC_Encrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+
+  case CRYP_CR_ALGOMODE_AES_CBC_DECRYPT:
+    HAL_CRYP_AESCBC_Decrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+
+  case CRYP_CR_ALGOMODE_AES_CTR_ENCRYPT:
+    HAL_CRYP_AESCTR_Encrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+
+  case CRYP_CR_ALGOMODE_AES_CTR_DECRYPT:
+    HAL_CRYP_AESCTR_Decrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+
+  default:
+    break;
+  }
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup CRYP_Exported_Functions_Group7 Peripheral State functions
+ *  @brief   Peripheral State functions.
+ *
+@verbatim
+  ==============================================================================
+                      ##### Peripheral State functions #####
+  ==============================================================================
+    [..]
+    This subsection permits to get in run-time the status of the peripheral.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Returns the CRYP state.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @retval HAL state
+  */
+HAL_CRYP_STATETypeDef HAL_CRYP_GetState(CRYP_HandleTypeDef *hcryp)
+{
+  return hcryp->State;
+}
+
+/**
+  * @}
+  */
+
+
+/**
+  * @}
+  */
+
+#endif /* STM32F415xx || STM32F417xx || STM32F437xx || STM32F439xx */
+
+#endif /* HAL_CRYP_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/