path: root/core_selector/src/rtl/global_selector.v

//======================================================================
//
// global_selector.v
// -----------------
// Top level wrapper that creates the Cryptech coretest system.
// The wrapper contains instances of external interface, coretest
// and the core to be tested. And if more than one core is
// present the wrapper also includes address and data muxes.
//
//
// Authors: Joachim Strombergson, Paul Selkirk, Pavel Shatov
// Copyright (c) 2014-2015, NORDUnet A/S All rights reserved.
// 
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
// - Redistributions of source code must retain the above copyright notice,
//   this list of conditions and the following disclaimer.
//
// - Redistributions in binary form must reproduce the above copyright
//   notice, this list of conditions and the following disclaimer in the
//   documentation and/or other materials provided with the distribution.
//
// - Neither the name of the NORDUnet nor the names of its contributors may
//   be used to endorse or promote products derived from this software
//   without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
//======================================================================

module global_selector
  (
   input wire           sys_clk,
   input wire           sys_rst,
   input wire           sys_ena,

   input wire [13: 0]   sys_eim_addr,
   input wire           sys_eim_wr,
   input wire           sys_eim_rd,
   output wire [31 : 0] sys_read_data,
   input wire [31 : 0]  sys_write_data,
   output wire          sys_error
   );

   
   //----------------------------------------------------------------
   // Address Decoder
   //----------------------------------------------------------------
   // upper 6 bits specify core being addressed
   wire [ 5: 0]         addr_core_num   = sys_eim_addr[13: 8];
   // lower 8 bits specify register offset in core
   wire [ 7: 0]         addr_core_reg   = sys_eim_addr[ 7: 0];


   //----------------------------------------------------------------
   // Core Address Table
   //----------------------------------------------------------------
   localparam   CORE_ADDR_BOARD_REGS    = 6'd0;
   localparam   CORE_ADDR_COMM_REGS     = 6'd1;
   
   
   //----------------------------------------------------------------
   // Board-Level Registers
   //----------------------------------------------------------------
   wire [31: 0]         read_data_board;
   wire                 enable_board = sys_ena && (addr_core_num == CORE_ADDR_BOARD_REGS);
   wire                 error_board;

   board_regs board_regs
     (
      .clk(sys_clk),
      .rst(sys_rst),

      .cs(enable_board & (sys_eim_rd | sys_eim_wr)),
      .we(sys_eim_wr),

      .address(addr_core_reg),
      .write_data(sys_write_data),
      .read_data(read_data_board),
      .error(error_board)
      );
   
   
   //----------------------------------------------------------------
   // Communication-Channel Registers
   //----------------------------------------------------------------
   wire [31: 0]         read_data_comm;
   wire                 enable_comm = sys_ena && (addr_core_num == CORE_ADDR_COMM_REGS);
   wire                 error_comm;

   comm_regs comm_regs
     (
      .clk(sys_clk),
      .rst(sys_rst),

      .cs(enable_comm & (sys_eim_rd | sys_eim_wr)),
      .we(sys_eim_wr),

      .address(addr_core_reg),
      .write_data(sys_write_data),
      .read_data(read_data_comm),
      .error(error_comm)
      );
   
   
   //----------------------------------------------------------------
   // Output (Read Data) Multiplexor
   //----------------------------------------------------------------
   reg [31: 0]          sys_read_data_mux;
   assign               sys_read_data = sys_read_data_mux;
   reg                  sys_error_mux;
   assign               sys_error = sys_error_mux;
   
   always @*
     //
     case (addr_core_num)
       //
       CORE_ADDR_BOARD_REGS:
         begin
            sys_read_data_mux = read_data_board;
            sys_error_mux = error_board;
         end
       CORE_ADDR_COMM_REGS:
         begin
            sys_read_data_mux = read_data_comm;
            sys_error_mux = error_comm;
         end
       //
       default:
         begin
            sys_read_data_mux = {32{1'b0}};
            sys_error_mux = 1;
         end
       //
     endcase


endmodule

//======================================================================
// EOF global_selector.v
//======================================================================