Removed FSM and cleaned up code in W mem. Cleaned up testbenches to silence warnings.

3 files changed, 86 insertions, 109 deletions

diff --git a/src/tb/tb_sha256.v b/src/tb/tb_sha256.v
index 6377688..01aa66e 100644
--- a/src/tb/tb_sha256.v
+++ b/src/tb/tb_sha256.v
@@ -38,12 +38,6 @@
 //======================================================================
 
 //------------------------------------------------------------------
-// Simulator directives.
-//------------------------------------------------------------------
-`timescale 1ns/10ps
-
-
-//------------------------------------------------------------------
 // Test module.
 //------------------------------------------------------------------
 module tb_sha256();
@@ -167,7 +161,7 @@ module tb_sha256();
   //
   // Dump the state of the dump when needed.
   //----------------------------------------------------------------
-  task dump_dut_state();
+  task dump_dut_state;
     begin
       $display("State of DUT");
       $display("------------");
@@ -211,7 +205,7 @@ module tb_sha256();
   //
   // Dump the state of the H registers when needed.
   //----------------------------------------------------------------
-  task dump_H_state();
+  task dump_H_state;
     begin
       $display("H0_reg = 0x%08x, H1_reg = 0x%08x, H2_reg = 0x%08x, H3_reg = 0x%08x",
                dut.core.H0_reg, dut.core.H1_reg, dut.core.H2_reg, dut.core.H3_reg);
@@ -227,7 +221,7 @@ module tb_sha256();
   //
   // Toggles reset to force the DUT into a well defined state.
   //----------------------------------------------------------------
-  task reset_dut();
+  task reset_dut;
     begin
       $display("*** Toggle reset.");
       tb_reset_n = 0;
@@ -243,7 +237,7 @@ module tb_sha256();
   // Initialize all counters and testbed functionality as well
   // as setting the DUT inputs to defined values.
   //----------------------------------------------------------------
-  task init_sim();
+  task init_sim;
     begin
       cycle_ctr = 32'h00000000;
       error_ctr = 32'h00000000;
@@ -264,7 +258,7 @@ module tb_sha256();
   //
   // Display the accumulated test results.
   //----------------------------------------------------------------
-  task display_test_result();
+  task display_test_result;
     begin
       if (error_ctr == 0)
         begin
@@ -289,7 +283,7 @@ module tb_sha256();
   // when the dut is actively processing and will in fact at some
   // point set the flag.
   //----------------------------------------------------------------
-  task wait_ready();
+  task wait_ready;
     begin
       read_data = 0;
 
@@ -383,7 +377,7 @@ module tb_sha256();
   //
   // Read the name and version from the DUT.
   //----------------------------------------------------------------
-  task check_name_version();
+  task check_name_version;
     reg [31 : 0] name0;
     reg [31 : 0] name1;
     reg [31 : 0] version;
@@ -411,7 +405,7 @@ module tb_sha256();
   // Read the digest in the dut. The resulting digest will be
   // available in the global variable digest_data.
   //----------------------------------------------------------------
-  task read_digest();
+  task read_digest;
     begin
       read_word(ADDR_DIGEST0);
       digest_data[255 : 224] = read_data;
@@ -453,8 +447,8 @@ module tb_sha256();
         write_word(ADDR_CTRL, CTRL_INIT_VALUE);
 
       #(CLK_PERIOD);
-      wait_ready();
-      read_digest();
+      wait_ready;
+      read_digest;
 
       // We need to ignore the LSW in SHA224 mode.
       if (mode == SHA224_MODE)
@@ -502,8 +496,8 @@ module tb_sha256();
         write_word(ADDR_CTRL, CTRL_INIT_VALUE);
 
       #(CLK_PERIOD);
-      wait_ready();
-      read_digest();
+      wait_ready;
+      read_digest;
 
       // We need to ignore the LSW in SHA224 mode.
       if (mode == SHA224_MODE)
@@ -530,8 +524,8 @@ module tb_sha256();
         write_word(ADDR_CTRL, CTRL_NEXT_VALUE);
 
       #(CLK_PERIOD);
-      wait_ready();
-      read_digest();
+      wait_ready;
+      read_digest;
 
       // We need to ignore the LSW in SHA224 mode.
       if (mode == SHA224_MODE)
@@ -587,8 +581,8 @@ module tb_sha256();
       write_block(block);
       write_word(ADDR_CTRL, (CTRL_MODE_VALUE + CTRL_NEXT_VALUE));
       #(CLK_PERIOD);
-      wait_ready();
-      read_digest();
+      wait_ready;
+      read_digest;
 
       if (digest_data == expected)
         begin
@@ -685,15 +679,15 @@ module tb_sha256();
     begin : sha256_top_test
       $display("   -- Testbench for sha256 started --");
 
-      init_sim();
-      reset_dut();
+      init_sim;
+      reset_dut;
 
-      check_name_version();
-      sha224_tests();
-      sha256_tests();
-      restore_state_test();
+      check_name_version;
+      sha224_tests;
+      sha256_tests;
+      restore_state_test;
 
-      display_test_result();
+      display_test_result;
 
       $display("   -- Testbench for sha256 done. --");
       $finish;
diff --git a/src/tb/tb_sha256_core.v b/src/tb/tb_sha256_core.v
index 981351c..3b76aca 100644
--- a/src/tb/tb_sha256_core.v
+++ b/src/tb/tb_sha256_core.v
@@ -38,12 +38,6 @@
 //======================================================================
 
 //------------------------------------------------------------------
-// Simulator directives.
-//------------------------------------------------------------------
-`timescale 1ns/10ps
-
-
-//------------------------------------------------------------------
 // Test module.
 //------------------------------------------------------------------
 module tb_sha256_core();
@@ -138,7 +132,7 @@ module tb_sha256_core();
       #(2 * CLK_HALF_PERIOD);
       if (DEBUG)
         begin
-          dump_dut_state();
+          dump_dut_state;
         end
     end
 
@@ -148,7 +142,7 @@ module tb_sha256_core();
   //
   // Dump the state of the dump when needed.
   //----------------------------------------------------------------
-  task dump_dut_state();
+  task dump_dut_state;
     begin
       $display("State of DUT");
       $display("------------");
@@ -203,7 +197,7 @@ module tb_sha256_core();
   //
   // Dump the state of the H registers when needed.
   //----------------------------------------------------------------
-  task dump_H_state();
+  task dump_H_state;
     begin
       $display("H0_reg = 0x%08x, H1_reg = 0x%08x, H2_reg = 0x%08x, H3_reg = 0x%08x",
                dut.H0_reg, dut.H1_reg, dut.H2_reg, dut.H3_reg);
@@ -219,7 +213,7 @@ module tb_sha256_core();
   //
   // Toggle reset to put the DUT into a well known state.
   //----------------------------------------------------------------
-  task reset_dut();
+  task reset_dut;
     begin
       $display("*** Toggle reset.");
       tb_reset_n = 0;
@@ -235,7 +229,7 @@ module tb_sha256_core();
   // Initialize all counters and testbed functionality as well
   // as setting the DUT inputs to defined values.
   //----------------------------------------------------------------
-  task init_sim();
+  task init_sim;
     begin
       cycle_ctr        = 0;
       error_ctr        = 0;
@@ -266,7 +260,7 @@ module tb_sha256_core();
   //
   // Display the accumulated test results.
   //----------------------------------------------------------------
-  task display_test_result();
+  task display_test_result;
     begin
       if (error_ctr == 0)
         begin
@@ -289,7 +283,7 @@ module tb_sha256_core();
   // when the dut is actively processing and will in fact at some
   // point set the flag.
   //----------------------------------------------------------------
-  task wait_ready();
+  task wait_ready;
     begin
       while (!tb_ready)
         begin
@@ -308,7 +302,7 @@ module tb_sha256_core();
   // when the dut is actively processing and will in fact at some
   // point set the flag.
   //----------------------------------------------------------------
-  task wait_data_valid();
+  task wait_data_valid;
     begin
       while (!tb_digest_valid)
         begin
@@ -334,7 +328,7 @@ module tb_sha256_core();
      tb_init = 1;
      #(CLK_PERIOD);
      tb_init = 0;
-     wait_ready();
+     wait_ready;
 
      if (tb_digest == expected)
        begin
@@ -378,18 +372,18 @@ module tb_sha256_core();
      tb_init = 1;
      #(CLK_PERIOD);
      tb_init = 0;
-     wait_ready();
+     wait_ready;
 
      db_digest1 = tb_digest;
      $display("*** TC %0d first block done.", tc_number);
 
      $display("*** TC %0d second block started.", tc_number);
      tb_block = block2;
-     dump_dut_state();
+     dump_dut_state;
      tb_next = 1;
      #(CLK_PERIOD);
      tb_next = 0;
-     wait_ready();
+     wait_ready;
 
      $display("*** TC %0d second block done.", tc_number);
 
@@ -496,7 +490,7 @@ module tb_sha256_core();
      tb_next = 1;
      #(CLK_PERIOD);
      tb_next = 0;
-     wait_ready();
+     wait_ready;
      $display("*** TC %0d block done.", tc_number);
 
      if (tb_digest == expected)
@@ -544,10 +538,10 @@ module tb_sha256_core();
 
       $display("   -- Testbench for sha256 core started --");
 
-      init_sim();
-      dump_dut_state();
-      reset_dut();
-      dump_dut_state();
+      init_sim;
+      dump_dut_state;
+      reset_dut;
+      dump_dut_state;
 
       // TC1: Single block message: "abc".
       tc1 = 512'h61626380000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000018;
@@ -568,7 +562,7 @@ module tb_sha256_core();
       tc3_res = 256'h248D6A61D20638B8E5C026930C3E6039A33CE45964FF2167F6ECEDD419DB06C1;
       state_restore_test(3, tc3_state, tc3_block, tc3_res);
 
-      display_test_result();
+      display_test_result;
       $display("*** Simulation done.");
       $finish;
     end // sha256_core_test
diff --git a/src/tb/tb_sha256_w_mem.v b/src/tb/tb_sha256_w_mem.v
index 9fdf063..c318a4d 100644
--- a/src/tb/tb_sha256_w_mem.v
+++ b/src/tb/tb_sha256_w_mem.v
@@ -8,7 +8,7 @@
 // Author: Joachim Strombergson
 // Copyright (c) 2014 NORDUnet A/S
 // All rights reserved.
-// 
+//
 // Redistribution and use in source and binary forms, with or without
 // modification, are permitted provided that the following conditions are
 // met:
@@ -37,11 +37,6 @@
 //
 //======================================================================
 
-//------------------------------------------------------------------
-// Simulator directives.
-//------------------------------------------------------------------
-`timescale 1ns/10ps
-
 module tb_sha256_w_mem();
 
   //----------------------------------------------------------------
@@ -52,55 +47,50 @@ module tb_sha256_w_mem();
 
   parameter CLK_HALF_PERIOD = 2;
 
-  
-  //----------------------------------------------------------------
-  // Registers including update variables and write enable.
-  //----------------------------------------------------------------
 
-  
   //----------------------------------------------------------------
   // Wires.
   //----------------------------------------------------------------
-  reg            tb_clk;
-  reg            tb_reset_n;
+  reg           tb_clk;
+  reg           tb_reset_n;
 
   reg           tb_init;
   reg           tb_next;
   reg [511 : 0] tb_block;
   wire [31 : 0] tb_w;
 
-  reg [63 : 0] cycle_ctr;
-  reg [31 : 0] error_ctr;
-  reg [31 : 0] tc_ctr;
-  
-  
+  reg [63 : 0]  cycle_ctr;
+  reg [31 : 0]  error_ctr;
+  reg [31 : 0]  tc_ctr;
+
+
   //----------------------------------------------------------------
   // Device Under Test.
   //----------------------------------------------------------------
   sha256_w_mem dut(
                    .clk(tb_clk),
                    .reset_n(tb_reset_n),
-                   
+
                    .block(tb_block),
-                   
+
                    .init(tb_init),
                    .next(tb_next),
 
                    .w(tb_w)
                   );
-  
+
 
   //----------------------------------------------------------------
   // clk_gen
   //
-  // Clock generator process. 
+  // Clock generator process.
   //----------------------------------------------------------------
-  always 
+  always
     begin : clk_gen
       #CLK_HALF_PERIOD tb_clk = !tb_clk;
     end // clk_gen
 
-  
+
   //--------------------------------------------------------------------
   // dut_monitor
   //
@@ -115,48 +105,47 @@ module tb_sha256_w_mem();
         begin
           $display("cycle = %016x:", cycle_ctr);
         end
-      
+
       if (DEBUG)
         begin
-          $display("dut ctrl_state = %02x:", dut.sha256_w_mem_ctrl_reg);
-          $display("dut w_ctr      = %02x:", dut.w_ctr_reg);
-          $display("dut w_tmp      = %02x:", dut.w_tmp);
-          dump_w_state();
+          $display("dut w_ctr = %02x:", dut.w_ctr_reg);
+          $display("dut w_tmp = %02x:", dut.w_tmp);
+          dump_w_state;
         end
     end // dut_monitor
-      
-  
+
+
   //----------------------------------------------------------------
   // dump_w_state()
   //
   // Dump the current state of all W registers.
   //----------------------------------------------------------------
-  task dump_w_state();
+  task dump_w_state;
     begin
       $display("W state:");
-      
-      $display("w0_reg  = %08x, w1_reg  = %08x, w2_reg  = %08x, w3_reg  = %08x", 
+
+      $display("w0_reg  = %08x, w1_reg  = %08x, w2_reg  = %08x, w3_reg  = %08x",
                dut.w_mem[00], dut.w_mem[01], dut.w_mem[02], dut.w_mem[03]);
 
-      $display("w4_reg  = %08x, w5_reg  = %08x, w6_reg  = %08x, w7_reg  = %08x", 
+      $display("w4_reg  = %08x, w5_reg  = %08x, w6_reg  = %08x, w7_reg  = %08x",
                dut.w_mem[04], dut.w_mem[05], dut.w_mem[06], dut.w_mem[07]);
 
-      $display("w8_reg  = %08x, w9_reg  = %08x, w10_reg = %08x, w11_reg = %08x", 
+      $display("w8_reg  = %08x, w9_reg  = %08x, w10_reg = %08x, w11_reg = %08x",
                dut.w_mem[08], dut.w_mem[09], dut.w_mem[10], dut.w_mem[11]);
 
-      $display("w12_reg = %08x, w13_reg = %08x, w14_reg = %08x, w15_reg = %08x", 
+      $display("w12_reg = %08x, w13_reg = %08x, w14_reg = %08x, w15_reg = %08x",
                dut.w_mem[12], dut.w_mem[13], dut.w_mem[14], dut.w_mem[15]);
 
       $display("w_new = %08x", dut.w_new);
       $display("");
     end
   endtask // dump_state
-  
-  
+
+
   //----------------------------------------------------------------
   // reset_dut
   //----------------------------------------------------------------
-  task reset_dut();
+  task reset_dut;
     begin
       $display("*** Toggle reset.");
       tb_reset_n = 0;
@@ -164,61 +153,61 @@ module tb_sha256_w_mem();
       tb_reset_n = 1;
     end
   endtask // reset_dut
-  
-  
+
+
   //----------------------------------------------------------------
   // init_sim
   //----------------------------------------------------------------
-  task init_sim();
+  task init_sim;
     begin
       $display("*** Simulation init.");
       tb_clk = 0;
       tb_reset_n = 1;
       cycle_ctr = 0;
-      
+
       tb_init = 0;
       tb_block = 512'h00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000;
     end
   endtask // reset_dut
-  
-  
+
+
   //----------------------------------------------------------------
   // test_w_schedule()
   //
   // Test that W scheduling happens and work correctly.
   // Note: Currently not a self checking test case.
   //----------------------------------------------------------------
-  task test_w_schedule();
+  task test_w_schedule;
     begin
       $display("*** Test of W schedule processing. --");
       tb_block = 512'h61626380000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000018;
       tb_init = 1;
       #(4 * CLK_HALF_PERIOD);
       tb_init = 0;
-      dump_w_state();
+      dump_w_state;
 
       tb_next = 1;
       #(150 * CLK_HALF_PERIOD);
     end
   endtask // test_w_schedule
-  
-    
+
+
   //----------------------------------------------------------------
-  // The main test functionality. 
+  // The main test functionality.
   //----------------------------------------------------------------
   initial
     begin : w_mem_test
       $display("   -- Testbench for sha256 w memory started --");
-      init_sim();
-      reset_dut();
-      test_w_schedule();
+      init_sim;
+      reset_dut;
+      test_w_schedule;
 
       $display("*** Simulation done.");
       $finish;
     end
-  
+
 endmodule // w_mem_test
-  
+
 //======================================================================
 // EOF tb_sha256_w_mem.v
 //======================================================================