diff options
Diffstat (limited to 'Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sd.c')
| -rw-r--r-- | Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sd.c | 3488 |
1 files changed, 3488 insertions, 0 deletions
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sd.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sd.c new file mode 100644 index 0000000..5ad58de --- /dev/null +++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sd.c @@ -0,0 +1,3488 @@ +/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_sd.c
+ * @author MCD Application Team
+ * @version V1.3.2
+ * @date 26-June-2015
+ * @brief SD card HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Secure Digital (SD) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ This driver implements a high level communication layer for read and write from/to
+ this memory. The needed STM32 hardware resources (SDIO and GPIO) are performed by
+ the user in HAL_SD_MspInit() function (MSP layer).
+ Basically, the MSP layer configuration should be the same as we provide in the
+ examples.
+ You can easily tailor this configuration according to hardware resources.
+
+ [..]
+ This driver is a generic layered driver for SDIO memories which uses the HAL
+ SDIO driver functions to interface with SD and uSD cards devices.
+ It is used as follows:
+
+ (#)Initialize the SDIO low level resources by implement the HAL_SD_MspInit() API:
+ (##) Enable the SDIO interface clock using __HAL_RCC_SDIO_CLK_ENABLE();
+ (##) SDIO pins configuration for SD card
+ (+++) Enable the clock for the SDIO GPIOs using the functions __HAL_RCC_GPIOx_CLK_ENABLE();
+ (+++) Configure these SDIO pins as alternate function pull-up using HAL_GPIO_Init()
+ and according to your pin assignment;
+ (##) DMA Configuration if you need to use DMA process (HAL_SD_ReadBlocks_DMA()
+ and HAL_SD_WriteBlocks_DMA() APIs).
+ (+++) Enable the DMAx interface clock using __HAL_RCC_DMAx_CLK_ENABLE();
+ (+++) Configure the DMA using the function HAL_DMA_Init() with predeclared and filled.
+ (##) NVIC configuration if you need to use interrupt process when using DMA transfer.
+ (+++) Configure the SDIO and DMA interrupt priorities using functions
+ HAL_NVIC_SetPriority(); DMA priority is superior to SDIO's priority
+ (+++) Enable the NVIC DMA and SDIO IRQs using function HAL_NVIC_EnableIRQ()
+ (+++) SDIO interrupts are managed using the macros __HAL_SD_SDIO_ENABLE_IT()
+ and __HAL_SD_SDIO_DISABLE_IT() inside the communication process.
+ (+++) SDIO interrupts pending bits are managed using the macros __HAL_SD_SDIO_GET_IT()
+ and __HAL_SD_SDIO_CLEAR_IT()
+ (#) At this stage, you can perform SD read/write/erase operations after SD card initialization
+
+
+ *** SD Card Initialization and configuration ***
+ ================================================
+ [..]
+ To initialize the SD Card, use the HAL_SD_Init() function. It Initializes
+ the SD Card and put it into Standby State (Ready for data transfer).
+ This function provide the following operations:
+
+ (#) Apply the SD Card initialization process at 400KHz and check the SD Card
+ type (Standard Capacity or High Capacity). You can change or adapt this
+ frequency by adjusting the "ClockDiv" field.
+ The SD Card frequency (SDIO_CK) is computed as follows:
+
+ SDIO_CK = SDIOCLK / (ClockDiv + 2)
+
+ In initialization mode and according to the SD Card standard,
+ make sure that the SDIO_CK frequency doesn't exceed 400KHz.
+
+ (#) Get the SD CID and CSD data. All these information are managed by the SDCardInfo
+ structure. This structure provide also ready computed SD Card capacity
+ and Block size.
+
+ -@- These information are stored in SD handle structure in case of future use.
+
+ (#) Configure the SD Card Data transfer frequency. By Default, the card transfer
+ frequency is set to 24MHz. You can change or adapt this frequency by adjusting
+ the "ClockDiv" field.
+ In transfer mode and according to the SD Card standard, make sure that the
+ SDIO_CK frequency doesn't exceed 25MHz and 50MHz in High-speed mode switch.
+ To be able to use a frequency higher than 24MHz, you should use the SDIO
+ peripheral in bypass mode. Refer to the corresponding reference manual
+ for more details.
+
+ (#) Select the corresponding SD Card according to the address read with the step 2.
+
+ (#) Configure the SD Card in wide bus mode: 4-bits data.
+
+ *** SD Card Read operation ***
+ ==============================
+ [..]
+ (+) You can read from SD card in polling mode by using function HAL_SD_ReadBlocks().
+ This function support only 512-bytes block length (the block size should be
+ chosen as 512 bytes).
+ You can choose either one block read operation or multiple block read operation
+ by adjusting the "NumberOfBlocks" parameter.
+
+ (+) You can read from SD card in DMA mode by using function HAL_SD_ReadBlocks_DMA().
+ This function support only 512-bytes block length (the block size should be
+ chosen as 512 bytes).
+ You can choose either one block read operation or multiple block read operation
+ by adjusting the "NumberOfBlocks" parameter.
+ After this, you have to call the function HAL_SD_CheckReadOperation(), to insure
+ that the read transfer is done correctly in both DMA and SD sides.
+
+ *** SD Card Write operation ***
+ ===============================
+ [..]
+ (+) You can write to SD card in polling mode by using function HAL_SD_WriteBlocks().
+ This function support only 512-bytes block length (the block size should be
+ chosen as 512 bytes).
+ You can choose either one block read operation or multiple block read operation
+ by adjusting the "NumberOfBlocks" parameter.
+
+ (+) You can write to SD card in DMA mode by using function HAL_SD_WriteBlocks_DMA().
+ This function support only 512-bytes block length (the block size should be
+ chosen as 512 byte).
+ You can choose either one block read operation or multiple block read operation
+ by adjusting the "NumberOfBlocks" parameter.
+ After this, you have to call the function HAL_SD_CheckWriteOperation(), to insure
+ that the write transfer is done correctly in both DMA and SD sides.
+
+ *** SD card status ***
+ ======================
+ [..]
+ (+) At any time, you can check the SD Card status and get the SD card state
+ by using the HAL_SD_GetStatus() function. This function checks first if the
+ SD card is still connected and then get the internal SD Card transfer state.
+ (+) You can also get the SD card SD Status register by using the HAL_SD_SendSDStatus()
+ function.
+
+ *** SD HAL driver macros list ***
+ ==================================
+ [..]
+ Below the list of most used macros in SD HAL driver.
+
+ (+) __HAL_SD_SDIO_ENABLE : Enable the SD device
+ (+) __HAL_SD_SDIO_DISABLE : Disable the SD device
+ (+) __HAL_SD_SDIO_DMA_ENABLE: Enable the SDIO DMA transfer
+ (+) __HAL_SD_SDIO_DMA_DISABLE: Disable the SDIO DMA transfer
+ (+) __HAL_SD_SDIO_ENABLE_IT: Enable the SD device interrupt
+ (+) __HAL_SD_SDIO_DISABLE_IT: Disable the SD device interrupt
+ (+) __HAL_SD_SDIO_GET_FLAG:Check whether the specified SD flag is set or not
+ (+) __HAL_SD_SDIO_CLEAR_FLAG: Clear the SD's pending flags
+
+ (@) You can refer to the SD HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+#ifdef HAL_SD_MODULE_ENABLED
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SD
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup SD_Private_Defines
+ * @{
+ */
+/**
+ * @brief SDIO Data block size
+ */
+#define DATA_BLOCK_SIZE ((uint32_t)(9 << 4))
+/**
+ * @brief SDIO Static flags, Timeout, FIFO Address
+ */
+#define SDIO_STATIC_FLAGS ((uint32_t)(SDIO_FLAG_CCRCFAIL | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_CTIMEOUT |\
+ SDIO_FLAG_DTIMEOUT | SDIO_FLAG_TXUNDERR | SDIO_FLAG_RXOVERR |\
+ SDIO_FLAG_CMDREND | SDIO_FLAG_CMDSENT | SDIO_FLAG_DATAEND |\
+ SDIO_FLAG_DBCKEND))
+
+#define SDIO_CMD0TIMEOUT ((uint32_t)0x00010000)
+
+/**
+ * @brief Mask for errors Card Status R1 (OCR Register)
+ */
+#define SD_OCR_ADDR_OUT_OF_RANGE ((uint32_t)0x80000000)
+#define SD_OCR_ADDR_MISALIGNED ((uint32_t)0x40000000)
+#define SD_OCR_BLOCK_LEN_ERR ((uint32_t)0x20000000)
+#define SD_OCR_ERASE_SEQ_ERR ((uint32_t)0x10000000)
+#define SD_OCR_BAD_ERASE_PARAM ((uint32_t)0x08000000)
+#define SD_OCR_WRITE_PROT_VIOLATION ((uint32_t)0x04000000)
+#define SD_OCR_LOCK_UNLOCK_FAILED ((uint32_t)0x01000000)
+#define SD_OCR_COM_CRC_FAILED ((uint32_t)0x00800000)
+#define SD_OCR_ILLEGAL_CMD ((uint32_t)0x00400000)
+#define SD_OCR_CARD_ECC_FAILED ((uint32_t)0x00200000)
+#define SD_OCR_CC_ERROR ((uint32_t)0x00100000)
+#define SD_OCR_GENERAL_UNKNOWN_ERROR ((uint32_t)0x00080000)
+#define SD_OCR_STREAM_READ_UNDERRUN ((uint32_t)0x00040000)
+#define SD_OCR_STREAM_WRITE_OVERRUN ((uint32_t)0x00020000)
+#define SD_OCR_CID_CSD_OVERWRITE ((uint32_t)0x00010000)
+#define SD_OCR_WP_ERASE_SKIP ((uint32_t)0x00008000)
+#define SD_OCR_CARD_ECC_DISABLED ((uint32_t)0x00004000)
+#define SD_OCR_ERASE_RESET ((uint32_t)0x00002000)
+#define SD_OCR_AKE_SEQ_ERROR ((uint32_t)0x00000008)
+#define SD_OCR_ERRORBITS ((uint32_t)0xFDFFE008)
+
+/**
+ * @brief Masks for R6 Response
+ */
+#define SD_R6_GENERAL_UNKNOWN_ERROR ((uint32_t)0x00002000)
+#define SD_R6_ILLEGAL_CMD ((uint32_t)0x00004000)
+#define SD_R6_COM_CRC_FAILED ((uint32_t)0x00008000)
+
+#define SD_VOLTAGE_WINDOW_SD ((uint32_t)0x80100000)
+#define SD_HIGH_CAPACITY ((uint32_t)0x40000000)
+#define SD_STD_CAPACITY ((uint32_t)0x00000000)
+#define SD_CHECK_PATTERN ((uint32_t)0x000001AA)
+
+#define SD_MAX_VOLT_TRIAL ((uint32_t)0x0000FFFF)
+#define SD_ALLZERO ((uint32_t)0x00000000)
+
+#define SD_WIDE_BUS_SUPPORT ((uint32_t)0x00040000)
+#define SD_SINGLE_BUS_SUPPORT ((uint32_t)0x00010000)
+#define SD_CARD_LOCKED ((uint32_t)0x02000000)
+
+#define SD_DATATIMEOUT ((uint32_t)0xFFFFFFFF)
+#define SD_0TO7BITS ((uint32_t)0x000000FF)
+#define SD_8TO15BITS ((uint32_t)0x0000FF00)
+#define SD_16TO23BITS ((uint32_t)0x00FF0000)
+#define SD_24TO31BITS ((uint32_t)0xFF000000)
+#define SD_MAX_DATA_LENGTH ((uint32_t)0x01FFFFFF)
+
+#define SD_HALFFIFO ((uint32_t)0x00000008)
+#define SD_HALFFIFOBYTES ((uint32_t)0x00000020)
+
+/**
+ * @brief Command Class Supported
+ */
+#define SD_CCCC_LOCK_UNLOCK ((uint32_t)0x00000080)
+#define SD_CCCC_WRITE_PROT ((uint32_t)0x00000040)
+#define SD_CCCC_ERASE ((uint32_t)0x00000020)
+
+/**
+ * @brief Following commands are SD Card Specific commands.
+ * SDIO_APP_CMD should be sent before sending these commands.
+ */
+#define SD_SDIO_SEND_IF_COND ((uint32_t)SD_CMD_HS_SEND_EXT_CSD)
+
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup SD_Private_Functions_Prototypes
+ * @{
+ */
+static HAL_SD_ErrorTypedef SD_Initialize_Cards(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_Select_Deselect(SD_HandleTypeDef *hsd, uint64_t addr);
+static HAL_SD_ErrorTypedef SD_PowerON(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_PowerOFF(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_SendStatus(SD_HandleTypeDef *hsd, uint32_t *pCardStatus);
+static HAL_SD_CardStateTypedef SD_GetState(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_IsCardProgramming(SD_HandleTypeDef *hsd, uint8_t *pStatus);
+static HAL_SD_ErrorTypedef SD_CmdError(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_CmdResp1Error(SD_HandleTypeDef *hsd, uint8_t SD_CMD);
+static HAL_SD_ErrorTypedef SD_CmdResp7Error(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_CmdResp3Error(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_CmdResp2Error(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_CmdResp6Error(SD_HandleTypeDef *hsd, uint8_t SD_CMD, uint16_t *pRCA);
+static HAL_SD_ErrorTypedef SD_WideBus_Enable(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_WideBus_Disable(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_FindSCR(SD_HandleTypeDef *hsd, uint32_t *pSCR);
+static void SD_DMA_RxCplt(DMA_HandleTypeDef *hdma);
+static void SD_DMA_RxError(DMA_HandleTypeDef *hdma);
+static void SD_DMA_TxCplt(DMA_HandleTypeDef *hdma);
+static void SD_DMA_TxError(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SD_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup SD_Exported_Functions_Group1
+ * @brief Initialization and de-initialization functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and de-initialization functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to initialize/de-initialize the SD
+ card device to be ready for use.
+
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the SD card according to the specified parameters in the
+ SD_HandleTypeDef and create the associated handle.
+ * @param hsd: SD handle
+ * @param SDCardInfo: HAL_SD_CardInfoTypedef structure for SD card information
+ * @retval HAL SD error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_Init(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *SDCardInfo)
+{
+ __IO HAL_SD_ErrorTypedef errorstate = SD_OK;
+ SD_InitTypeDef tmpinit;
+
+ /* Allocate lock resource and initialize it */
+ hsd->Lock = HAL_UNLOCKED;
+ /* Initialize the low level hardware (MSP) */
+ HAL_SD_MspInit(hsd);
+
+ /* Default SDIO peripheral configuration for SD card initialization */
+ tmpinit.ClockEdge = SDIO_CLOCK_EDGE_RISING;
+ tmpinit.ClockBypass = SDIO_CLOCK_BYPASS_DISABLE;
+ tmpinit.ClockPowerSave = SDIO_CLOCK_POWER_SAVE_DISABLE;
+ tmpinit.BusWide = SDIO_BUS_WIDE_1B;
+ tmpinit.HardwareFlowControl = SDIO_HARDWARE_FLOW_CONTROL_DISABLE;
+ tmpinit.ClockDiv = SDIO_INIT_CLK_DIV;
+
+ /* Initialize SDIO peripheral interface with default configuration */
+ SDIO_Init(hsd->Instance, tmpinit);
+
+ /* Identify card operating voltage */
+ errorstate = SD_PowerON(hsd);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Initialize the present SDIO card(s) and put them in idle state */
+ errorstate = SD_Initialize_Cards(hsd);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Read CSD/CID MSD registers */
+ errorstate = HAL_SD_Get_CardInfo(hsd, SDCardInfo);
+
+ if (errorstate == SD_OK)
+ {
+ /* Select the Card */
+ errorstate = SD_Select_Deselect(hsd, (uint32_t)(((uint32_t)SDCardInfo->RCA) << 16));
+ }
+
+ /* Configure SDIO peripheral interface */
+ SDIO_Init(hsd->Instance, hsd->Init);
+
+ return errorstate;
+}
+
+/**
+ * @brief De-Initializes the SD card.
+ * @param hsd: SD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SD_DeInit(SD_HandleTypeDef *hsd)
+{
+
+ /* Set SD power state to off */
+ SD_PowerOFF(hsd);
+
+ /* De-Initialize the MSP layer */
+ HAL_SD_MspDeInit(hsd);
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Initializes the SD MSP.
+ * @param hsd: SD handle
+ * @retval None
+ */
+__weak void HAL_SD_MspInit(SD_HandleTypeDef *hsd)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SD_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief De-Initialize SD MSP.
+ * @param hsd: SD handle
+ * @retval None
+ */
+__weak void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SD_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @addtogroup SD_Exported_Functions_Group2
+ * @brief Data transfer functions
+ *
+@verbatim
+ ==============================================================================
+ ##### IO operation functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the data
+ transfer from/to SD card.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Reads block(s) from a specified address in a card. The Data transfer
+ * is managed by polling mode.
+ * @param hsd: SD handle
+ * @param pReadBuffer: pointer to the buffer that will contain the received data
+ * @param ReadAddr: Address from where data is to be read
+ * @param BlockSize: SD card Data block size
+ * @note BlockSize must be 512 bytes.
+ * @param NumberOfBlocks: Number of SD blocks to read
+ * @retval SD Card error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_ReadBlocks(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ SDIO_DataInitTypeDef sdio_datainitstructure;
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ uint32_t count = 0, *tempbuff = (uint32_t *)pReadBuffer;
+
+ /* Initialize data control register */
+ hsd->Instance->DCTRL = 0;
+
+ if (hsd->CardType == HIGH_CAPACITY_SD_CARD)
+ {
+ BlockSize = 512;
+ ReadAddr /= 512;
+ }
+
+ /* Set Block Size for Card */
+ sdio_cmdinitstructure.Argument = (uint32_t) BlockSize;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Configure the SD DPSM (Data Path State Machine) */
+ sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT;
+ sdio_datainitstructure.DataLength = NumberOfBlocks * BlockSize;
+ sdio_datainitstructure.DataBlockSize = DATA_BLOCK_SIZE;
+ sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO;
+ sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
+ sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE;
+ SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure);
+
+ if(NumberOfBlocks > 1)
+ {
+ /* Send CMD18 READ_MULT_BLOCK with argument data address */
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_READ_MULT_BLOCK;
+ }
+ else
+ {
+ /* Send CMD17 READ_SINGLE_BLOCK */
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_READ_SINGLE_BLOCK;
+ }
+
+ sdio_cmdinitstructure.Argument = (uint32_t)ReadAddr;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Read block(s) in polling mode */
+ if(NumberOfBlocks > 1)
+ {
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_READ_MULT_BLOCK);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Poll on SDIO flags */
+#ifdef SDIO_STA_STBITERR
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND | SDIO_FLAG_STBITERR))
+#else /* SDIO_STA_STBITERR not defined */
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND))
+#endif /* SDIO_STA_STBITERR */
+ {
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXFIFOHF))
+ {
+ /* Read data from SDIO Rx FIFO */
+ for (count = 0; count < 8; count++)
+ {
+ *(tempbuff + count) = SDIO_ReadFIFO(hsd->Instance);
+ }
+
+ tempbuff += 8;
+ }
+ }
+ }
+ else
+ {
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_READ_SINGLE_BLOCK);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* In case of single block transfer, no need of stop transfer at all */
+#ifdef SDIO_STA_STBITERR
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR))
+#else /* SDIO_STA_STBITERR not defined */
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND))
+#endif /* SDIO_STA_STBITERR */
+ {
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXFIFOHF))
+ {
+ /* Read data from SDIO Rx FIFO */
+ for (count = 0; count < 8; count++)
+ {
+ *(tempbuff + count) = SDIO_ReadFIFO(hsd->Instance);
+ }
+
+ tempbuff += 8;
+ }
+ }
+ }
+
+ /* Send stop transmission command in case of multiblock read */
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DATAEND) && (NumberOfBlocks > 1))
+ {
+ if ((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) ||\
+ (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0) ||\
+ (hsd->CardType == HIGH_CAPACITY_SD_CARD))
+ {
+ /* Send stop transmission command */
+ errorstate = HAL_SD_StopTransfer(hsd);
+ }
+ }
+
+ /* Get error state */
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT);
+
+ errorstate = SD_DATA_TIMEOUT;
+
+ return errorstate;
+ }
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL);
+
+ errorstate = SD_DATA_CRC_FAIL;
+
+ return errorstate;
+ }
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_RXOVERR);
+
+ errorstate = SD_RX_OVERRUN;
+
+ return errorstate;
+ }
+#ifdef SDIO_STA_STBITERR
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_STBITERR))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR);
+
+ errorstate = SD_START_BIT_ERR;
+
+ return errorstate;
+ }
+#endif /* SDIO_STA_STBITERR */
+ else
+ {
+ /* No error flag set */
+ }
+
+ count = SD_DATATIMEOUT;
+
+ /* Empty FIFO if there is still any data */
+ while ((__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXDAVL)) && (count > 0))
+ {
+ *tempbuff = SDIO_ReadFIFO(hsd->Instance);
+ tempbuff++;
+ count--;
+ }
+
+ /* Clear all the static flags */
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+ return errorstate;
+}
+
+/**
+ * @brief Allows to write block(s) to a specified address in a card. The Data
+ * transfer is managed by polling mode.
+ * @param hsd: SD handle
+ * @param pWriteBuffer: pointer to the buffer that will contain the data to transmit
+ * @param WriteAddr: Address from where data is to be written
+ * @param BlockSize: SD card Data block size
+ * @note BlockSize must be 512 bytes.
+ * @param NumberOfBlocks: Number of SD blocks to write
+ * @retval SD Card error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_WriteBlocks(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ SDIO_DataInitTypeDef sdio_datainitstructure;
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ uint32_t totalnumberofbytes = 0, bytestransferred = 0, count = 0, restwords = 0;
+ uint32_t *tempbuff = (uint32_t *)pWriteBuffer;
+ uint8_t cardstate = 0;
+
+ /* Initialize data control register */
+ hsd->Instance->DCTRL = 0;
+
+ if (hsd->CardType == HIGH_CAPACITY_SD_CARD)
+ {
+ BlockSize = 512;
+ WriteAddr /= 512;
+ }
+
+ /* Set Block Size for Card */
+ sdio_cmdinitstructure.Argument = (uint32_t)BlockSize;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ if(NumberOfBlocks > 1)
+ {
+ /* Send CMD25 WRITE_MULT_BLOCK with argument data address */
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_WRITE_MULT_BLOCK;
+ }
+ else
+ {
+ /* Send CMD24 WRITE_SINGLE_BLOCK */
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_WRITE_SINGLE_BLOCK;
+ }
+
+ sdio_cmdinitstructure.Argument = (uint32_t)WriteAddr;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ if(NumberOfBlocks > 1)
+ {
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_WRITE_MULT_BLOCK);
+ }
+ else
+ {
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_WRITE_SINGLE_BLOCK);
+ }
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Set total number of bytes to write */
+ totalnumberofbytes = NumberOfBlocks * BlockSize;
+
+ /* Configure the SD DPSM (Data Path State Machine) */
+ sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT;
+ sdio_datainitstructure.DataLength = NumberOfBlocks * BlockSize;
+ sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_512B;
+ sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_CARD;
+ sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
+ sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE;
+ SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure);
+
+ /* Write block(s) in polling mode */
+ if(NumberOfBlocks > 1)
+ {
+#ifdef SDIO_STA_STBITERR
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND | SDIO_FLAG_STBITERR))
+#else /* SDIO_STA_STBITERR not defined */
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND))
+#endif /* SDIO_STA_STBITERR */
+ {
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXFIFOHE))
+ {
+ if ((totalnumberofbytes - bytestransferred) < 32)
+ {
+ restwords = ((totalnumberofbytes - bytestransferred) % 4 == 0) ? ((totalnumberofbytes - bytestransferred) / 4) : (( totalnumberofbytes - bytestransferred) / 4 + 1);
+
+ /* Write data to SDIO Tx FIFO */
+ for (count = 0; count < restwords; count++)
+ {
+ SDIO_WriteFIFO(hsd->Instance, tempbuff);
+ tempbuff++;
+ bytestransferred += 4;
+ }
+ }
+ else
+ {
+ /* Write data to SDIO Tx FIFO */
+ for (count = 0; count < 8; count++)
+ {
+ SDIO_WriteFIFO(hsd->Instance, (tempbuff + count));
+ }
+
+ tempbuff += 8;
+ bytestransferred += 32;
+ }
+ }
+ }
+ }
+ else
+ {
+ /* In case of single data block transfer no need of stop command at all */
+#ifdef SDIO_STA_STBITERR
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR))
+#else /* SDIO_STA_STBITERR not defined */
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND))
+#endif /* SDIO_STA_STBITERR */
+ {
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXFIFOHE))
+ {
+ if ((totalnumberofbytes - bytestransferred) < 32)
+ {
+ restwords = ((totalnumberofbytes - bytestransferred) % 4 == 0) ? ((totalnumberofbytes - bytestransferred) / 4) : (( totalnumberofbytes - bytestransferred) / 4 + 1);
+
+ /* Write data to SDIO Tx FIFO */
+ for (count = 0; count < restwords; count++)
+ {
+ SDIO_WriteFIFO(hsd->Instance, tempbuff);
+ tempbuff++;
+ bytestransferred += 4;
+ }
+ }
+ else
+ {
+ /* Write data to SDIO Tx FIFO */
+ for (count = 0; count < 8; count++)
+ {
+ SDIO_WriteFIFO(hsd->Instance, (tempbuff + count));
+ }
+
+ tempbuff += 8;
+ bytestransferred += 32;
+ }
+ }
+ }
+ }
+
+ /* Send stop transmission command in case of multiblock write */
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DATAEND) && (NumberOfBlocks > 1))
+ {
+ if ((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) || (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0) ||\
+ (hsd->CardType == HIGH_CAPACITY_SD_CARD))
+ {
+ /* Send stop transmission command */
+ errorstate = HAL_SD_StopTransfer(hsd);
+ }
+ }
+
+ /* Get error state */
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT);
+
+ errorstate = SD_DATA_TIMEOUT;
+
+ return errorstate;
+ }
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL);
+
+ errorstate = SD_DATA_CRC_FAIL;
+
+ return errorstate;
+ }
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_TXUNDERR);
+
+ errorstate = SD_TX_UNDERRUN;
+
+ return errorstate;
+ }
+#ifdef SDIO_STA_STBITERR
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_STBITERR))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR);
+
+ errorstate = SD_START_BIT_ERR;
+
+ return errorstate;
+ }
+#endif /* SDIO_STA_STBITERR */
+ else
+ {
+ /* No error flag set */
+ }
+
+ /* Clear all the static flags */
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+ /* Wait till the card is in programming state */
+ errorstate = SD_IsCardProgramming(hsd, &cardstate);
+
+ while ((errorstate == SD_OK) && ((cardstate == SD_CARD_PROGRAMMING) || (cardstate == SD_CARD_RECEIVING)))
+ {
+ errorstate = SD_IsCardProgramming(hsd, &cardstate);
+ }
+
+ return errorstate;
+}
+
+/**
+ * @brief Reads block(s) from a specified address in a card. The Data transfer
+ * is managed by DMA mode.
+ * @note This API should be followed by the function HAL_SD_CheckReadOperation()
+ * to check the completion of the read process
+ * @param hsd: SD handle
+ * @param pReadBuffer: Pointer to the buffer that will contain the received data
+ * @param ReadAddr: Address from where data is to be read
+ * @param BlockSize: SD card Data block size
+ * @note BlockSize must be 512 bytes.
+ * @param NumberOfBlocks: Number of blocks to read.
+ * @retval SD Card error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ SDIO_DataInitTypeDef sdio_datainitstructure;
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+
+ /* Initialize data control register */
+ hsd->Instance->DCTRL = 0;
+
+ /* Initialize handle flags */
+ hsd->SdTransferCplt = 0;
+ hsd->DmaTransferCplt = 0;
+ hsd->SdTransferErr = SD_OK;
+
+ /* Initialize SD Read operation */
+ if(NumberOfBlocks > 1)
+ {
+ hsd->SdOperation = SD_READ_MULTIPLE_BLOCK;
+ }
+ else
+ {
+ hsd->SdOperation = SD_READ_SINGLE_BLOCK;
+ }
+
+ /* Enable transfer interrupts */
+#ifdef SDIO_STA_STBITERR
+ __HAL_SD_SDIO_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL |\
+ SDIO_IT_DTIMEOUT |\
+ SDIO_IT_DATAEND |\
+ SDIO_IT_RXOVERR |\
+ SDIO_IT_STBITERR));
+#else /* SDIO_STA_STBITERR not defined */
+ __HAL_SD_SDIO_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL |\
+ SDIO_IT_DTIMEOUT |\
+ SDIO_IT_DATAEND |\
+ SDIO_IT_RXOVERR));
+#endif /* SDIO_STA_STBITERR */
+
+ /* Enable SDIO DMA transfer */
+ __HAL_SD_SDIO_DMA_ENABLE();
+
+ /* Configure DMA user callbacks */
+ hsd->hdmarx->XferCpltCallback = SD_DMA_RxCplt;
+ hsd->hdmarx->XferErrorCallback = SD_DMA_RxError;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(hsd->hdmarx, (uint32_t)&hsd->Instance->FIFO, (uint32_t)pReadBuffer, (uint32_t)(BlockSize * NumberOfBlocks)/4);
+
+ if (hsd->CardType == HIGH_CAPACITY_SD_CARD)
+ {
+ BlockSize = 512;
+ ReadAddr /= 512;
+ }
+
+ /* Set Block Size for Card */
+ sdio_cmdinitstructure.Argument = (uint32_t)BlockSize;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Configure the SD DPSM (Data Path State Machine) */
+ sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT;
+ sdio_datainitstructure.DataLength = BlockSize * NumberOfBlocks;
+ sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_512B;
+ sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO;
+ sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
+ sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE;
+ SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure);
+
+ /* Check number of blocks command */
+ if(NumberOfBlocks > 1)
+ {
+ /* Send CMD18 READ_MULT_BLOCK with argument data address */
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_READ_MULT_BLOCK;
+ }
+ else
+ {
+ /* Send CMD17 READ_SINGLE_BLOCK */
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_READ_SINGLE_BLOCK;
+ }
+
+ sdio_cmdinitstructure.Argument = (uint32_t)ReadAddr;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ if(NumberOfBlocks > 1)
+ {
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_READ_MULT_BLOCK);
+ }
+ else
+ {
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_READ_SINGLE_BLOCK);
+ }
+
+ /* Update the SD transfer error in SD handle */
+ hsd->SdTransferErr = errorstate;
+
+ return errorstate;
+}
+
+
+/**
+ * @brief Writes block(s) to a specified address in a card. The Data transfer
+ * is managed by DMA mode.
+ * @note This API should be followed by the function HAL_SD_CheckWriteOperation()
+ * to check the completion of the write process (by SD current status polling).
+ * @param hsd: SD handle
+ * @param pWriteBuffer: pointer to the buffer that will contain the data to transmit
+ * @param WriteAddr: Address from where data is to be read
+ * @param BlockSize: the SD card Data block size
+ * @note BlockSize must be 512 bytes.
+ * @param NumberOfBlocks: Number of blocks to write
+ * @retval SD Card error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ SDIO_DataInitTypeDef sdio_datainitstructure;
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+
+ /* Initialize data control register */
+ hsd->Instance->DCTRL = 0;
+
+ /* Initialize handle flags */
+ hsd->SdTransferCplt = 0;
+ hsd->DmaTransferCplt = 0;
+ hsd->SdTransferErr = SD_OK;
+
+ /* Initialize SD Write operation */
+ if(NumberOfBlocks > 1)
+ {
+ hsd->SdOperation = SD_WRITE_MULTIPLE_BLOCK;
+ }
+ else
+ {
+ hsd->SdOperation = SD_WRITE_SINGLE_BLOCK;
+ }
+
+ /* Enable transfer interrupts */
+#ifdef SDIO_STA_STBITERR
+ __HAL_SD_SDIO_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL |\
+ SDIO_IT_DTIMEOUT |\
+ SDIO_IT_DATAEND |\
+ SDIO_IT_TXUNDERR |\
+ SDIO_IT_STBITERR));
+#else /* SDIO_STA_STBITERR not defined */
+ __HAL_SD_SDIO_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL |\
+ SDIO_IT_DTIMEOUT |\
+ SDIO_IT_DATAEND |\
+ SDIO_IT_TXUNDERR));
+#endif /* SDIO_STA_STBITERR */
+
+ /* Configure DMA user callbacks */
+ hsd->hdmatx->XferCpltCallback = SD_DMA_TxCplt;
+ hsd->hdmatx->XferErrorCallback = SD_DMA_TxError;
+
+ /* Enable the DMA Stream */
+ HAL_DMA_Start_IT(hsd->hdmatx, (uint32_t)pWriteBuffer, (uint32_t)&hsd->Instance->FIFO, (uint32_t)(BlockSize * NumberOfBlocks)/4);
+
+ /* Enable SDIO DMA transfer */
+ __HAL_SD_SDIO_DMA_ENABLE();
+
+ if (hsd->CardType == HIGH_CAPACITY_SD_CARD)
+ {
+ BlockSize = 512;
+ WriteAddr /= 512;
+ }
+
+ /* Set Block Size for Card */
+ sdio_cmdinitstructure.Argument = (uint32_t)BlockSize;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Check number of blocks command */
+ if(NumberOfBlocks <= 1)
+ {
+ /* Send CMD24 WRITE_SINGLE_BLOCK */
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_WRITE_SINGLE_BLOCK;
+ }
+ else
+ {
+ /* Send CMD25 WRITE_MULT_BLOCK with argument data address */
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_WRITE_MULT_BLOCK;
+ }
+
+ sdio_cmdinitstructure.Argument = (uint32_t)WriteAddr;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ if(NumberOfBlocks > 1)
+ {
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_WRITE_MULT_BLOCK);
+ }
+ else
+ {
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_WRITE_SINGLE_BLOCK);
+ }
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Configure the SD DPSM (Data Path State Machine) */
+ sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT;
+ sdio_datainitstructure.DataLength = BlockSize * NumberOfBlocks;
+ sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_512B;
+ sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_CARD;
+ sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
+ sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE;
+ SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure);
+
+ hsd->SdTransferErr = errorstate;
+
+ return errorstate;
+}
+
+/**
+ * @brief This function waits until the SD DMA data read transfer is finished.
+ * This API should be called after HAL_SD_ReadBlocks_DMA() function
+ * to insure that all data sent by the card is already transferred by the
+ * DMA controller.
+ * @param hsd: SD handle
+ * @param Timeout: Timeout duration
+ * @retval SD Card error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_CheckReadOperation(SD_HandleTypeDef *hsd, uint32_t Timeout)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ uint32_t timeout = Timeout;
+ uint32_t tmp1, tmp2;
+ HAL_SD_ErrorTypedef tmp3;
+
+ /* Wait for DMA/SD transfer end or SD error variables to be in SD handle */
+ tmp1 = hsd->DmaTransferCplt;
+ tmp2 = hsd->SdTransferCplt;
+ tmp3 = (HAL_SD_ErrorTypedef)hsd->SdTransferErr;
+
+ while ((tmp1 == 0) && (tmp2 == 0) && (tmp3 == SD_OK) && (timeout > 0))
+ {
+ tmp1 = hsd->DmaTransferCplt;
+ tmp2 = hsd->SdTransferCplt;
+ tmp3 = (HAL_SD_ErrorTypedef)hsd->SdTransferErr;
+ timeout--;
+ }
+
+ timeout = Timeout;
+
+ /* Wait until the Rx transfer is no longer active */
+ while((__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXACT)) && (timeout > 0))
+ {
+ timeout--;
+ }
+
+ /* Send stop command in multiblock read */
+ if (hsd->SdOperation == SD_READ_MULTIPLE_BLOCK)
+ {
+ errorstate = HAL_SD_StopTransfer(hsd);
+ }
+
+ if ((timeout == 0) && (errorstate == SD_OK))
+ {
+ errorstate = SD_DATA_TIMEOUT;
+ }
+
+ /* Clear all the static flags */
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+ /* Return error state */
+ if (hsd->SdTransferErr != SD_OK)
+ {
+ return (HAL_SD_ErrorTypedef)(hsd->SdTransferErr);
+ }
+
+ return errorstate;
+}
+
+/**
+ * @brief This function waits until the SD DMA data write transfer is finished.
+ * This API should be called after HAL_SD_WriteBlocks_DMA() function
+ * to insure that all data sent by the card is already transferred by the
+ * DMA controller.
+ * @param hsd: SD handle
+ * @param Timeout: Timeout duration
+ * @retval SD Card error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_CheckWriteOperation(SD_HandleTypeDef *hsd, uint32_t Timeout)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ uint32_t timeout = Timeout;
+ uint32_t tmp1, tmp2;
+ HAL_SD_ErrorTypedef tmp3;
+
+ /* Wait for DMA/SD transfer end or SD error variables to be in SD handle */
+ tmp1 = hsd->DmaTransferCplt;
+ tmp2 = hsd->SdTransferCplt;
+ tmp3 = (HAL_SD_ErrorTypedef)hsd->SdTransferErr;
+
+ while ((tmp1 == 0) && (tmp2 == 0) && (tmp3 == SD_OK) && (timeout > 0))
+ {
+ tmp1 = hsd->DmaTransferCplt;
+ tmp2 = hsd->SdTransferCplt;
+ tmp3 = (HAL_SD_ErrorTypedef)hsd->SdTransferErr;
+ timeout--;
+ }
+
+ timeout = Timeout;
+
+ /* Wait until the Tx transfer is no longer active */
+ while((__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXACT)) && (timeout > 0))
+ {
+ timeout--;
+ }
+
+ /* Send stop command in multiblock write */
+ if (hsd->SdOperation == SD_WRITE_MULTIPLE_BLOCK)
+ {
+ errorstate = HAL_SD_StopTransfer(hsd);
+ }
+
+ if ((timeout == 0) && (errorstate == SD_OK))
+ {
+ errorstate = SD_DATA_TIMEOUT;
+ }
+
+ /* Clear all the static flags */
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+ /* Return error state */
+ if (hsd->SdTransferErr != SD_OK)
+ {
+ return (HAL_SD_ErrorTypedef)(hsd->SdTransferErr);
+ }
+
+ /* Wait until write is complete */
+ while(HAL_SD_GetStatus(hsd) != SD_TRANSFER_OK)
+ {
+ }
+
+ return errorstate;
+}
+
+/**
+ * @brief Erases the specified memory area of the given SD card.
+ * @param hsd: SD handle
+ * @param startaddr: Start byte address
+ * @param endaddr: End byte address
+ * @retval SD Card error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_Erase(SD_HandleTypeDef *hsd, uint64_t startaddr, uint64_t endaddr)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+
+ uint32_t delay = 0;
+ __IO uint32_t maxdelay = 0;
+ uint8_t cardstate = 0;
+
+ /* Check if the card command class supports erase command */
+ if (((hsd->CSD[1] >> 20) & SD_CCCC_ERASE) == 0)
+ {
+ errorstate = SD_REQUEST_NOT_APPLICABLE;
+
+ return errorstate;
+ }
+
+ /* Get max delay value */
+ maxdelay = 120000 / (((hsd->Instance->CLKCR) & 0xFF) + 2);
+
+ if((SDIO_GetResponse(SDIO_RESP1) & SD_CARD_LOCKED) == SD_CARD_LOCKED)
+ {
+ errorstate = SD_LOCK_UNLOCK_FAILED;
+
+ return errorstate;
+ }
+
+ /* Get start and end block for high capacity cards */
+ if (hsd->CardType == HIGH_CAPACITY_SD_CARD)
+ {
+ startaddr /= 512;
+ endaddr /= 512;
+ }
+
+ /* According to sd-card spec 1.0 ERASE_GROUP_START (CMD32) and erase_group_end(CMD33) */
+ if ((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) || (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0) ||\
+ (hsd->CardType == HIGH_CAPACITY_SD_CARD))
+ {
+ /* Send CMD32 SD_ERASE_GRP_START with argument as addr */
+ sdio_cmdinitstructure.Argument =(uint32_t)startaddr;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SD_ERASE_GRP_START;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_SD_ERASE_GRP_START);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Send CMD33 SD_ERASE_GRP_END with argument as addr */
+ sdio_cmdinitstructure.Argument = (uint32_t)endaddr;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SD_ERASE_GRP_END;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_SD_ERASE_GRP_END);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+ }
+
+ /* Send CMD38 ERASE */
+ sdio_cmdinitstructure.Argument = 0;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_ERASE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_ERASE);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ for (; delay < maxdelay; delay++)
+ {
+ }
+
+ /* Wait until the card is in programming state */
+ errorstate = SD_IsCardProgramming(hsd, &cardstate);
+
+ delay = SD_DATATIMEOUT;
+
+ while ((delay > 0) && (errorstate == SD_OK) && ((cardstate == SD_CARD_PROGRAMMING) || (cardstate == SD_CARD_RECEIVING)))
+ {
+ errorstate = SD_IsCardProgramming(hsd, &cardstate);
+ delay--;
+ }
+
+ return errorstate;
+}
+
+/**
+ * @brief This function handles SD card interrupt request.
+ * @param hsd: SD handle
+ * @retval None
+ */
+void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd)
+{
+ /* Check for SDIO interrupt flags */
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_DATAEND))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_IT_DATAEND);
+
+ /* SD transfer is complete */
+ hsd->SdTransferCplt = 1;
+
+ /* No transfer error */
+ hsd->SdTransferErr = SD_OK;
+
+ HAL_SD_XferCpltCallback(hsd);
+ }
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_DCRCFAIL))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL);
+
+ hsd->SdTransferErr = SD_DATA_CRC_FAIL;
+
+ HAL_SD_XferErrorCallback(hsd);
+
+ }
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_DTIMEOUT))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT);
+
+ hsd->SdTransferErr = SD_DATA_TIMEOUT;
+
+ HAL_SD_XferErrorCallback(hsd);
+ }
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_RXOVERR))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_RXOVERR);
+
+ hsd->SdTransferErr = SD_RX_OVERRUN;
+
+ HAL_SD_XferErrorCallback(hsd);
+ }
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_TXUNDERR))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_TXUNDERR);
+
+ hsd->SdTransferErr = SD_TX_UNDERRUN;
+
+ HAL_SD_XferErrorCallback(hsd);
+ }
+#ifdef SDIO_STA_STBITERR
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_STBITERR))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR);
+
+ hsd->SdTransferErr = SD_START_BIT_ERR;
+
+ HAL_SD_XferErrorCallback(hsd);
+ }
+#endif /* SDIO_STA_STBITERR */
+ else
+ {
+ /* No error flag set */
+ }
+
+ /* Disable all SDIO peripheral interrupt sources */
+#ifdef SDIO_STA_STBITERR
+ __HAL_SD_SDIO_DISABLE_IT(hsd, SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_DATAEND |\
+ SDIO_IT_TXFIFOHE | SDIO_IT_RXFIFOHF | SDIO_IT_TXUNDERR |\
+ SDIO_IT_RXOVERR | SDIO_IT_STBITERR);
+#else /* SDIO_STA_STBITERR not defined */
+ __HAL_SD_SDIO_DISABLE_IT(hsd, SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_DATAEND |\
+ SDIO_IT_TXFIFOHE | SDIO_IT_RXFIFOHF | SDIO_IT_TXUNDERR |\
+ SDIO_IT_RXOVERR);
+#endif /* SDIO_STA_STBITERR */
+}
+
+
+/**
+ * @brief SD end of transfer callback.
+ * @param hsd: SD handle
+ * @retval None
+ */
+__weak void HAL_SD_XferCpltCallback(SD_HandleTypeDef *hsd)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SD_XferCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief SD Transfer Error callback.
+ * @param hsd: SD handle
+ * @retval None
+ */
+__weak void HAL_SD_XferErrorCallback(SD_HandleTypeDef *hsd)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SD_XferErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief SD Transfer complete Rx callback in non blocking mode.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+__weak void HAL_SD_DMA_RxCpltCallback(DMA_HandleTypeDef *hdma)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SD_DMA_RxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief SD DMA transfer complete Rx error callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+__weak void HAL_SD_DMA_RxErrorCallback(DMA_HandleTypeDef *hdma)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SD_DMA_RxErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief SD Transfer complete Tx callback in non blocking mode.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+__weak void HAL_SD_DMA_TxCpltCallback(DMA_HandleTypeDef *hdma)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SD_DMA_TxCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief SD DMA transfer complete error Tx callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+__weak void HAL_SD_DMA_TxErrorCallback(DMA_HandleTypeDef *hdma)
+{
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_SD_DMA_TxErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @addtogroup SD_Exported_Functions_Group3
+ * @brief management functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral Control functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the SD card
+ operations.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns information about specific card.
+ * @param hsd: SD handle
+ * @param pCardInfo: Pointer to a HAL_SD_CardInfoTypedef structure that
+ * contains all SD cardinformation
+ * @retval SD Card error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_Get_CardInfo(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *pCardInfo)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ uint32_t tmp = 0;
+
+ pCardInfo->CardType = (uint8_t)(hsd->CardType);
+ pCardInfo->RCA = (uint16_t)(hsd->RCA);
+
+ /* Byte 0 */
+ tmp = (hsd->CSD[0] & 0xFF000000) >> 24;
+ pCardInfo->SD_csd.CSDStruct = (uint8_t)((tmp & 0xC0) >> 6);
+ pCardInfo->SD_csd.SysSpecVersion = (uint8_t)((tmp & 0x3C) >> 2);
+ pCardInfo->SD_csd.Reserved1 = tmp & 0x03;
+
+ /* Byte 1 */
+ tmp = (hsd->CSD[0] & 0x00FF0000) >> 16;
+ pCardInfo->SD_csd.TAAC = (uint8_t)tmp;
+
+ /* Byte 2 */
+ tmp = (hsd->CSD[0] & 0x0000FF00) >> 8;
+ pCardInfo->SD_csd.NSAC = (uint8_t)tmp;
+
+ /* Byte 3 */
+ tmp = hsd->CSD[0] & 0x000000FF;
+ pCardInfo->SD_csd.MaxBusClkFrec = (uint8_t)tmp;
+
+ /* Byte 4 */
+ tmp = (hsd->CSD[1] & 0xFF000000) >> 24;
+ pCardInfo->SD_csd.CardComdClasses = (uint16_t)(tmp << 4);
+
+ /* Byte 5 */
+ tmp = (hsd->CSD[1] & 0x00FF0000) >> 16;
+ pCardInfo->SD_csd.CardComdClasses |= (uint16_t)((tmp & 0xF0) >> 4);
+ pCardInfo->SD_csd.RdBlockLen = (uint8_t)(tmp & 0x0F);
+
+ /* Byte 6 */
+ tmp = (hsd->CSD[1] & 0x0000FF00) >> 8;
+ pCardInfo->SD_csd.PartBlockRead = (uint8_t)((tmp & 0x80) >> 7);
+ pCardInfo->SD_csd.WrBlockMisalign = (uint8_t)((tmp & 0x40) >> 6);
+ pCardInfo->SD_csd.RdBlockMisalign = (uint8_t)((tmp & 0x20) >> 5);
+ pCardInfo->SD_csd.DSRImpl = (uint8_t)((tmp & 0x10) >> 4);
+ pCardInfo->SD_csd.Reserved2 = 0; /*!< Reserved */
+
+ if ((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) || (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0))
+ {
+ pCardInfo->SD_csd.DeviceSize = (tmp & 0x03) << 10;
+
+ /* Byte 7 */
+ tmp = (uint8_t)(hsd->CSD[1] & 0x000000FF);
+ pCardInfo->SD_csd.DeviceSize |= (tmp) << 2;
+
+ /* Byte 8 */
+ tmp = (uint8_t)((hsd->CSD[2] & 0xFF000000) >> 24);
+ pCardInfo->SD_csd.DeviceSize |= (tmp & 0xC0) >> 6;
+
+ pCardInfo->SD_csd.MaxRdCurrentVDDMin = (tmp & 0x38) >> 3;
+ pCardInfo->SD_csd.MaxRdCurrentVDDMax = (tmp & 0x07);
+
+ /* Byte 9 */
+ tmp = (uint8_t)((hsd->CSD[2] & 0x00FF0000) >> 16);
+ pCardInfo->SD_csd.MaxWrCurrentVDDMin = (tmp & 0xE0) >> 5;
+ pCardInfo->SD_csd.MaxWrCurrentVDDMax = (tmp & 0x1C) >> 2;
+ pCardInfo->SD_csd.DeviceSizeMul = (tmp & 0x03) << 1;
+ /* Byte 10 */
+ tmp = (uint8_t)((hsd->CSD[2] & 0x0000FF00) >> 8);
+ pCardInfo->SD_csd.DeviceSizeMul |= (tmp & 0x80) >> 7;
+
+ pCardInfo->CardCapacity = (pCardInfo->SD_csd.DeviceSize + 1) ;
+ pCardInfo->CardCapacity *= (1 << (pCardInfo->SD_csd.DeviceSizeMul + 2));
+ pCardInfo->CardBlockSize = 1 << (pCardInfo->SD_csd.RdBlockLen);
+ pCardInfo->CardCapacity *= pCardInfo->CardBlockSize;
+ }
+ else if (hsd->CardType == HIGH_CAPACITY_SD_CARD)
+ {
+ /* Byte 7 */
+ tmp = (uint8_t)(hsd->CSD[1] & 0x000000FF);
+ pCardInfo->SD_csd.DeviceSize = (tmp & 0x3F) << 16;
+
+ /* Byte 8 */
+ tmp = (uint8_t)((hsd->CSD[2] & 0xFF000000) >> 24);
+
+ pCardInfo->SD_csd.DeviceSize |= (tmp << 8);
+
+ /* Byte 9 */
+ tmp = (uint8_t)((hsd->CSD[2] & 0x00FF0000) >> 16);
+
+ pCardInfo->SD_csd.DeviceSize |= (tmp);
+
+ /* Byte 10 */
+ tmp = (uint8_t)((hsd->CSD[2] & 0x0000FF00) >> 8);
+
+ pCardInfo->CardCapacity = (uint64_t)((((uint64_t)pCardInfo->SD_csd.DeviceSize + 1)) * 512 * 1024);
+ pCardInfo->CardBlockSize = 512;
+ }
+ else
+ {
+ /* Not supported card type */
+ errorstate = SD_ERROR;
+ }
+
+ pCardInfo->SD_csd.EraseGrSize = (tmp & 0x40) >> 6;
+ pCardInfo->SD_csd.EraseGrMul = (tmp & 0x3F) << 1;
+
+ /* Byte 11 */
+ tmp = (uint8_t)(hsd->CSD[2] & 0x000000FF);
+ pCardInfo->SD_csd.EraseGrMul |= (tmp & 0x80) >> 7;
+ pCardInfo->SD_csd.WrProtectGrSize = (tmp & 0x7F);
+
+ /* Byte 12 */
+ tmp = (uint8_t)((hsd->CSD[3] & 0xFF000000) >> 24);
+ pCardInfo->SD_csd.WrProtectGrEnable = (tmp & 0x80) >> 7;
+ pCardInfo->SD_csd.ManDeflECC = (tmp & 0x60) >> 5;
+ pCardInfo->SD_csd.WrSpeedFact = (tmp & 0x1C) >> 2;
+ pCardInfo->SD_csd.MaxWrBlockLen = (tmp & 0x03) << 2;
+
+ /* Byte 13 */
+ tmp = (uint8_t)((hsd->CSD[3] & 0x00FF0000) >> 16);
+ pCardInfo->SD_csd.MaxWrBlockLen |= (tmp & 0xC0) >> 6;
+ pCardInfo->SD_csd.WriteBlockPaPartial = (tmp & 0x20) >> 5;
+ pCardInfo->SD_csd.Reserved3 = 0;
+ pCardInfo->SD_csd.ContentProtectAppli = (tmp & 0x01);
+
+ /* Byte 14 */
+ tmp = (uint8_t)((hsd->CSD[3] & 0x0000FF00) >> 8);
+ pCardInfo->SD_csd.FileFormatGrouop = (tmp & 0x80) >> 7;
+ pCardInfo->SD_csd.CopyFlag = (tmp & 0x40) >> 6;
+ pCardInfo->SD_csd.PermWrProtect = (tmp & 0x20) >> 5;
+ pCardInfo->SD_csd.TempWrProtect = (tmp & 0x10) >> 4;
+ pCardInfo->SD_csd.FileFormat = (tmp & 0x0C) >> 2;
+ pCardInfo->SD_csd.ECC = (tmp & 0x03);
+
+ /* Byte 15 */
+ tmp = (uint8_t)(hsd->CSD[3] & 0x000000FF);
+ pCardInfo->SD_csd.CSD_CRC = (tmp & 0xFE) >> 1;
+ pCardInfo->SD_csd.Reserved4 = 1;
+
+ /* Byte 0 */
+ tmp = (uint8_t)((hsd->CID[0] & 0xFF000000) >> 24);
+ pCardInfo->SD_cid.ManufacturerID = tmp;
+
+ /* Byte 1 */
+ tmp = (uint8_t)((hsd->CID[0] & 0x00FF0000) >> 16);
+ pCardInfo->SD_cid.OEM_AppliID = tmp << 8;
+
+ /* Byte 2 */
+ tmp = (uint8_t)((hsd->CID[0] & 0x000000FF00) >> 8);
+ pCardInfo->SD_cid.OEM_AppliID |= tmp;
+
+ /* Byte 3 */
+ tmp = (uint8_t)(hsd->CID[0] & 0x000000FF);
+ pCardInfo->SD_cid.ProdName1 = tmp << 24;
+
+ /* Byte 4 */
+ tmp = (uint8_t)((hsd->CID[1] & 0xFF000000) >> 24);
+ pCardInfo->SD_cid.ProdName1 |= tmp << 16;
+
+ /* Byte 5 */
+ tmp = (uint8_t)((hsd->CID[1] & 0x00FF0000) >> 16);
+ pCardInfo->SD_cid.ProdName1 |= tmp << 8;
+
+ /* Byte 6 */
+ tmp = (uint8_t)((hsd->CID[1] & 0x0000FF00) >> 8);
+ pCardInfo->SD_cid.ProdName1 |= tmp;
+
+ /* Byte 7 */
+ tmp = (uint8_t)(hsd->CID[1] & 0x000000FF);
+ pCardInfo->SD_cid.ProdName2 = tmp;
+
+ /* Byte 8 */
+ tmp = (uint8_t)((hsd->CID[2] & 0xFF000000) >> 24);
+ pCardInfo->SD_cid.ProdRev = tmp;
+
+ /* Byte 9 */
+ tmp = (uint8_t)((hsd->CID[2] & 0x00FF0000) >> 16);
+ pCardInfo->SD_cid.ProdSN = tmp << 24;
+
+ /* Byte 10 */
+ tmp = (uint8_t)((hsd->CID[2] & 0x0000FF00) >> 8);
+ pCardInfo->SD_cid.ProdSN |= tmp << 16;
+
+ /* Byte 11 */
+ tmp = (uint8_t)(hsd->CID[2] & 0x000000FF);
+ pCardInfo->SD_cid.ProdSN |= tmp << 8;
+
+ /* Byte 12 */
+ tmp = (uint8_t)((hsd->CID[3] & 0xFF000000) >> 24);
+ pCardInfo->SD_cid.ProdSN |= tmp;
+
+ /* Byte 13 */
+ tmp = (uint8_t)((hsd->CID[3] & 0x00FF0000) >> 16);
+ pCardInfo->SD_cid.Reserved1 |= (tmp & 0xF0) >> 4;
+ pCardInfo->SD_cid.ManufactDate = (tmp & 0x0F) << 8;
+
+ /* Byte 14 */
+ tmp = (uint8_t)((hsd->CID[3] & 0x0000FF00) >> 8);
+ pCardInfo->SD_cid.ManufactDate |= tmp;
+
+ /* Byte 15 */
+ tmp = (uint8_t)(hsd->CID[3] & 0x000000FF);
+ pCardInfo->SD_cid.CID_CRC = (tmp & 0xFE) >> 1;
+ pCardInfo->SD_cid.Reserved2 = 1;
+
+ return errorstate;
+}
+
+/**
+ * @brief Enables wide bus operation for the requested card if supported by
+ * card.
+ * @param hsd: SD handle
+ * @param WideMode: Specifies the SD card wide bus mode
+ * This parameter can be one of the following values:
+ * @arg SDIO_BUS_WIDE_8B: 8-bit data transfer (Only for MMC)
+ * @arg SDIO_BUS_WIDE_4B: 4-bit data transfer
+ * @arg SDIO_BUS_WIDE_1B: 1-bit data transfer
+ * @retval SD Card error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_WideBusOperation_Config(SD_HandleTypeDef *hsd, uint32_t WideMode)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ SDIO_InitTypeDef tmpinit;
+
+ /* MMC Card does not support this feature */
+ if (hsd->CardType == MULTIMEDIA_CARD)
+ {
+ errorstate = SD_UNSUPPORTED_FEATURE;
+
+ return errorstate;
+ }
+ else if ((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) || (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0) ||\
+ (hsd->CardType == HIGH_CAPACITY_SD_CARD))
+ {
+ if (WideMode == SDIO_BUS_WIDE_8B)
+ {
+ errorstate = SD_UNSUPPORTED_FEATURE;
+ }
+ else if (WideMode == SDIO_BUS_WIDE_4B)
+ {
+ errorstate = SD_WideBus_Enable(hsd);
+ }
+ else if (WideMode == SDIO_BUS_WIDE_1B)
+ {
+ errorstate = SD_WideBus_Disable(hsd);
+ }
+ else
+ {
+ /* WideMode is not a valid argument*/
+ errorstate = SD_INVALID_PARAMETER;
+ }
+
+ if (errorstate == SD_OK)
+ {
+ /* Configure the SDIO peripheral */
+ tmpinit.ClockEdge = hsd->Init.ClockEdge;
+ tmpinit.ClockBypass = hsd->Init.ClockBypass;
+ tmpinit.ClockPowerSave = hsd->Init.ClockPowerSave;
+ tmpinit.BusWide = WideMode;
+ tmpinit.HardwareFlowControl = hsd->Init.HardwareFlowControl;
+ tmpinit.ClockDiv = hsd->Init.ClockDiv;
+ SDIO_Init(hsd->Instance, tmpinit);
+ }
+ }
+
+ return errorstate;
+}
+
+/**
+ * @brief Aborts an ongoing data transfer.
+ * @param hsd: SD handle
+ * @retval SD Card error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_StopTransfer(SD_HandleTypeDef *hsd)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+
+ /* Send CMD12 STOP_TRANSMISSION */
+ sdio_cmdinitstructure.Argument = 0;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_STOP_TRANSMISSION;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_STOP_TRANSMISSION);
+
+ return errorstate;
+}
+
+/**
+ * @brief Switches the SD card to High Speed mode.
+ * This API must be used after "Transfer State"
+ * @note This operation should be followed by the configuration
+ * of PLL to have SDIOCK clock between 67 and 75 MHz
+ * @param hsd: SD handle
+ * @retval SD Card error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_HighSpeed (SD_HandleTypeDef *hsd)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ SDIO_DataInitTypeDef sdio_datainitstructure;
+
+ uint8_t SD_hs[64] = {0};
+ uint32_t SD_scr[2] = {0, 0};
+ uint32_t SD_SPEC = 0 ;
+ uint32_t count = 0, *tempbuff = (uint32_t *)SD_hs;
+
+ /* Initialize the Data control register */
+ hsd->Instance->DCTRL = 0;
+
+ /* Get SCR Register */
+ errorstate = SD_FindSCR(hsd, SD_scr);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Test the Version supported by the card*/
+ SD_SPEC = (SD_scr[1] & 0x01000000) | (SD_scr[1] & 0x02000000);
+
+ if (SD_SPEC != SD_ALLZERO)
+ {
+ /* Set Block Size for Card */
+ sdio_cmdinitstructure.Argument = (uint32_t)64;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Configure the SD DPSM (Data Path State Machine) */
+ sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT;
+ sdio_datainitstructure.DataLength = 64;
+ sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_64B ;
+ sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO;
+ sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
+ sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE;
+ SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure);
+
+ /* Send CMD6 switch mode */
+ sdio_cmdinitstructure.Argument = 0x80FFFF01;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_HS_SWITCH;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_HS_SWITCH);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+#ifdef SDIO_STA_STBITERR
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR))
+#else /* SDIO_STA_STBITERR */
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND))
+#endif /* SDIO_STA_STBITERR */
+ {
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXFIFOHF))
+ {
+ for (count = 0; count < 8; count++)
+ {
+ *(tempbuff + count) = SDIO_ReadFIFO(hsd->Instance);
+ }
+
+ tempbuff += 8;
+ }
+ }
+
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT);
+
+ errorstate = SD_DATA_TIMEOUT;
+
+ return errorstate;
+ }
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL);
+
+ errorstate = SD_DATA_CRC_FAIL;
+
+ return errorstate;
+ }
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_RXOVERR);
+
+ errorstate = SD_RX_OVERRUN;
+
+ return errorstate;
+ }
+#ifdef SDIO_STA_STBITERR
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_STBITERR))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR);
+
+ errorstate = SD_START_BIT_ERR;
+
+ return errorstate;
+ }
+#endif /* SDIO_STA_STBITERR */
+ else
+ {
+ /* No error flag set */
+ }
+
+ count = SD_DATATIMEOUT;
+
+ while ((__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXDAVL)) && (count > 0))
+ {
+ *tempbuff = SDIO_ReadFIFO(hsd->Instance);
+ tempbuff++;
+ count--;
+ }
+
+ /* Clear all the static flags */
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+ /* Test if the switch mode HS is ok */
+ if ((SD_hs[13]& 2) != 2)
+ {
+ errorstate = SD_UNSUPPORTED_FEATURE;
+ }
+ }
+
+ return errorstate;
+}
+
+/**
+ * @}
+ */
+
+/** @addtogroup SD_Exported_Functions_Group4
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral State functions #####
+ ==============================================================================
+ [..]
+ This subsection permits to get in runtime the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns the current SD card's status.
+ * @param hsd: SD handle
+ * @param pSDstatus: Pointer to the buffer that will contain the SD card status
+ * SD Status register)
+ * @retval SD Card error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_SendSDStatus(SD_HandleTypeDef *hsd, uint32_t *pSDstatus)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ SDIO_DataInitTypeDef sdio_datainitstructure;
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ uint32_t count = 0;
+
+ /* Check SD response */
+ if ((SDIO_GetResponse(SDIO_RESP1) & SD_CARD_LOCKED) == SD_CARD_LOCKED)
+ {
+ errorstate = SD_LOCK_UNLOCK_FAILED;
+
+ return errorstate;
+ }
+
+ /* Set block size for card if it is not equal to current block size for card */
+ sdio_cmdinitstructure.Argument = 64;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Send CMD55 */
+ sdio_cmdinitstructure.Argument = (uint32_t)(hsd->RCA << 16);
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_CMD;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Configure the SD DPSM (Data Path State Machine) */
+ sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT;
+ sdio_datainitstructure.DataLength = 64;
+ sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_64B;
+ sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO;
+ sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
+ sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE;
+ SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure);
+
+ /* Send ACMD13 (SD_APP_STATUS) with argument as card's RCA */
+ sdio_cmdinitstructure.Argument = 0;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SD_APP_STATUS;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_SD_APP_STATUS);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Get status data */
+#ifdef SDIO_STA_STBITERR
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR))
+#else /* SDIO_STA_STBITERR not defined */
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND))
+#endif /* SDIO_STA_STBITERR */
+ {
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXFIFOHF))
+ {
+ for (count = 0; count < 8; count++)
+ {
+ *(pSDstatus + count) = SDIO_ReadFIFO(hsd->Instance);
+ }
+
+ pSDstatus += 8;
+ }
+ }
+
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT);
+
+ errorstate = SD_DATA_TIMEOUT;
+
+ return errorstate;
+ }
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL);
+
+ errorstate = SD_DATA_CRC_FAIL;
+
+ return errorstate;
+ }
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_RXOVERR);
+
+ errorstate = SD_RX_OVERRUN;
+
+ return errorstate;
+ }
+#ifdef SDIO_STA_STBITERR
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_STBITERR))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR);
+
+ errorstate = SD_START_BIT_ERR;
+
+ return errorstate;
+ }
+#endif /* SDIO_STA_STBITERR */
+ else
+ {
+ /* No error flag set */
+ }
+
+ count = SD_DATATIMEOUT;
+ while ((__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXDAVL)) && (count > 0))
+ {
+ *pSDstatus = SDIO_ReadFIFO(hsd->Instance);
+ pSDstatus++;
+ count--;
+ }
+
+ /* Clear all the static status flags*/
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+ return errorstate;
+}
+
+/**
+ * @brief Gets the current sd card data status.
+ * @param hsd: SD handle
+ * @retval Data Transfer state
+ */
+HAL_SD_TransferStateTypedef HAL_SD_GetStatus(SD_HandleTypeDef *hsd)
+{
+ HAL_SD_CardStateTypedef cardstate = SD_CARD_TRANSFER;
+
+ /* Get SD card state */
+ cardstate = SD_GetState(hsd);
+
+ /* Find SD status according to card state*/
+ if (cardstate == SD_CARD_TRANSFER)
+ {
+ return SD_TRANSFER_OK;
+ }
+ else if(cardstate == SD_CARD_ERROR)
+ {
+ return SD_TRANSFER_ERROR;
+ }
+ else
+ {
+ return SD_TRANSFER_BUSY;
+ }
+}
+
+/**
+ * @brief Gets the SD card status.
+ * @param hsd: SD handle
+ * @param pCardStatus: Pointer to the HAL_SD_CardStatusTypedef structure that
+ * will contain the SD card status information
+ * @retval SD Card error state
+ */
+HAL_SD_ErrorTypedef HAL_SD_GetCardStatus(SD_HandleTypeDef *hsd, HAL_SD_CardStatusTypedef *pCardStatus)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ uint32_t tmp = 0;
+ uint32_t sd_status[16];
+
+ errorstate = HAL_SD_SendSDStatus(hsd, sd_status);
+
+ if (errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Byte 0 */
+ tmp = (sd_status[0] & 0xC0) >> 6;
+ pCardStatus->DAT_BUS_WIDTH = (uint8_t)tmp;
+
+ /* Byte 0 */
+ tmp = (sd_status[0] & 0x20) >> 5;
+ pCardStatus->SECURED_MODE = (uint8_t)tmp;
+
+ /* Byte 2 */
+ tmp = (sd_status[2] & 0xFF);
+ pCardStatus->SD_CARD_TYPE = (uint8_t)(tmp << 8);
+
+ /* Byte 3 */
+ tmp = (sd_status[3] & 0xFF);
+ pCardStatus->SD_CARD_TYPE |= (uint8_t)tmp;
+
+ /* Byte 4 */
+ tmp = (sd_status[4] & 0xFF);
+ pCardStatus->SIZE_OF_PROTECTED_AREA = (uint8_t)(tmp << 24);
+
+ /* Byte 5 */
+ tmp = (sd_status[5] & 0xFF);
+ pCardStatus->SIZE_OF_PROTECTED_AREA |= (uint8_t)(tmp << 16);
+
+ /* Byte 6 */
+ tmp = (sd_status[6] & 0xFF);
+ pCardStatus->SIZE_OF_PROTECTED_AREA |= (uint8_t)(tmp << 8);
+
+ /* Byte 7 */
+ tmp = (sd_status[7] & 0xFF);
+ pCardStatus->SIZE_OF_PROTECTED_AREA |= (uint8_t)tmp;
+
+ /* Byte 8 */
+ tmp = (sd_status[8] & 0xFF);
+ pCardStatus->SPEED_CLASS = (uint8_t)tmp;
+
+ /* Byte 9 */
+ tmp = (sd_status[9] & 0xFF);
+ pCardStatus->PERFORMANCE_MOVE = (uint8_t)tmp;
+
+ /* Byte 10 */
+ tmp = (sd_status[10] & 0xF0) >> 4;
+ pCardStatus->AU_SIZE = (uint8_t)tmp;
+
+ /* Byte 11 */
+ tmp = (sd_status[11] & 0xFF);
+ pCardStatus->ERASE_SIZE = (uint8_t)(tmp << 8);
+
+ /* Byte 12 */
+ tmp = (sd_status[12] & 0xFF);
+ pCardStatus->ERASE_SIZE |= (uint8_t)tmp;
+
+ /* Byte 13 */
+ tmp = (sd_status[13] & 0xFC) >> 2;
+ pCardStatus->ERASE_TIMEOUT = (uint8_t)tmp;
+
+ /* Byte 13 */
+ tmp = (sd_status[13] & 0x3);
+ pCardStatus->ERASE_OFFSET = (uint8_t)tmp;
+
+ return errorstate;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private function ----------------------------------------------------------*/
+/** @addtogroup SD_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief SD DMA transfer complete Rx callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SD_DMA_RxCplt(DMA_HandleTypeDef *hdma)
+{
+ SD_HandleTypeDef *hsd = (SD_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ /* DMA transfer is complete */
+ hsd->DmaTransferCplt = 1;
+
+ /* Wait until SD transfer is complete */
+ while(hsd->SdTransferCplt == 0)
+ {
+ }
+
+ /* Disable the DMA channel */
+ HAL_DMA_Abort(hdma);
+
+ /* Transfer complete user callback */
+ HAL_SD_DMA_RxCpltCallback(hsd->hdmarx);
+}
+
+/**
+ * @brief SD DMA transfer Error Rx callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SD_DMA_RxError(DMA_HandleTypeDef *hdma)
+{
+ SD_HandleTypeDef *hsd = (SD_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ /* Transfer complete user callback */
+ HAL_SD_DMA_RxErrorCallback(hsd->hdmarx);
+}
+
+/**
+ * @brief SD DMA transfer complete Tx callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SD_DMA_TxCplt(DMA_HandleTypeDef *hdma)
+{
+ SD_HandleTypeDef *hsd = (SD_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+ /* DMA transfer is complete */
+ hsd->DmaTransferCplt = 1;
+
+ /* Wait until SD transfer is complete */
+ while(hsd->SdTransferCplt == 0)
+ {
+ }
+
+ /* Disable the DMA channel */
+ HAL_DMA_Abort(hdma);
+
+ /* Transfer complete user callback */
+ HAL_SD_DMA_TxCpltCallback(hsd->hdmatx);
+}
+
+/**
+ * @brief SD DMA transfer Error Tx callback.
+ * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SD_DMA_TxError(DMA_HandleTypeDef *hdma)
+{
+ SD_HandleTypeDef *hsd = ( SD_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+ /* Transfer complete user callback */
+ HAL_SD_DMA_TxErrorCallback(hsd->hdmatx);
+}
+
+/**
+ * @brief Returns the SD current state.
+ * @param hsd: SD handle
+ * @retval SD card current state
+ */
+static HAL_SD_CardStateTypedef SD_GetState(SD_HandleTypeDef *hsd)
+{
+ uint32_t resp1 = 0;
+
+ if (SD_SendStatus(hsd, &resp1) != SD_OK)
+ {
+ return SD_CARD_ERROR;
+ }
+ else
+ {
+ return (HAL_SD_CardStateTypedef)((resp1 >> 9) & 0x0F);
+ }
+}
+
+/**
+ * @brief Initializes all cards or single card as the case may be Card(s) come
+ * into standby state.
+ * @param hsd: SD handle
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_Initialize_Cards(SD_HandleTypeDef *hsd)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ uint16_t sd_rca = 1;
+
+ if(SDIO_GetPowerState(hsd->Instance) == 0) /* Power off */
+ {
+ errorstate = SD_REQUEST_NOT_APPLICABLE;
+
+ return errorstate;
+ }
+
+ if(hsd->CardType != SECURE_DIGITAL_IO_CARD)
+ {
+ /* Send CMD2 ALL_SEND_CID */
+ sdio_cmdinitstructure.Argument = 0;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_ALL_SEND_CID;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_LONG;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp2Error(hsd);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Get Card identification number data */
+ hsd->CID[0] = SDIO_GetResponse(SDIO_RESP1);
+ hsd->CID[1] = SDIO_GetResponse(SDIO_RESP2);
+ hsd->CID[2] = SDIO_GetResponse(SDIO_RESP3);
+ hsd->CID[3] = SDIO_GetResponse(SDIO_RESP4);
+ }
+
+ if((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) || (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0) ||\
+ (hsd->CardType == SECURE_DIGITAL_IO_COMBO_CARD) || (hsd->CardType == HIGH_CAPACITY_SD_CARD))
+ {
+ /* Send CMD3 SET_REL_ADDR with argument 0 */
+ /* SD Card publishes its RCA. */
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_REL_ADDR;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp6Error(hsd, SD_CMD_SET_REL_ADDR, &sd_rca);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+ }
+
+ if (hsd->CardType != SECURE_DIGITAL_IO_CARD)
+ {
+ /* Get the SD card RCA */
+ hsd->RCA = sd_rca;
+
+ /* Send CMD9 SEND_CSD with argument as card's RCA */
+ sdio_cmdinitstructure.Argument = (uint32_t)(hsd->RCA << 16);
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SEND_CSD;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_LONG;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp2Error(hsd);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Get Card Specific Data */
+ hsd->CSD[0] = SDIO_GetResponse(SDIO_RESP1);
+ hsd->CSD[1] = SDIO_GetResponse(SDIO_RESP2);
+ hsd->CSD[2] = SDIO_GetResponse(SDIO_RESP3);
+ hsd->CSD[3] = SDIO_GetResponse(SDIO_RESP4);
+ }
+
+ /* All cards are initialized */
+ return errorstate;
+}
+
+/**
+ * @brief Selects of Deselects the corresponding card.
+ * @param hsd: SD handle
+ * @param addr: Address of the card to be selected
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_Select_Deselect(SD_HandleTypeDef *hsd, uint64_t addr)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+
+ /* Send CMD7 SDIO_SEL_DESEL_CARD */
+ sdio_cmdinitstructure.Argument = (uint32_t)addr;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SEL_DESEL_CARD;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_SEL_DESEL_CARD);
+
+ return errorstate;
+}
+
+/**
+ * @brief Enquires cards about their operating voltage and configures clock
+ * controls and stores SD information that will be needed in future
+ * in the SD handle.
+ * @param hsd: SD handle
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_PowerON(SD_HandleTypeDef *hsd)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ __IO HAL_SD_ErrorTypedef errorstate = SD_OK;
+ uint32_t response = 0, count = 0, validvoltage = 0;
+ uint32_t sdtype = SD_STD_CAPACITY;
+
+ /* Power ON Sequence -------------------------------------------------------*/
+ /* Disable SDIO Clock */
+ __HAL_SD_SDIO_DISABLE();
+
+ /* Set Power State to ON */
+ SDIO_PowerState_ON(hsd->Instance);
+
+ /* 1ms: required power up waiting time before starting the SD initialization
+ sequence */
+ HAL_Delay(1);
+
+ /* Enable SDIO Clock */
+ __HAL_SD_SDIO_ENABLE();
+
+ /* CMD0: GO_IDLE_STATE -----------------------------------------------------*/
+ /* No CMD response required */
+ sdio_cmdinitstructure.Argument = 0;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_GO_IDLE_STATE;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_NO;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdError(hsd);
+
+ if(errorstate != SD_OK)
+ {
+ /* CMD Response Timeout (wait for CMDSENT flag) */
+ return errorstate;
+ }
+
+ /* CMD8: SEND_IF_COND ------------------------------------------------------*/
+ /* Send CMD8 to verify SD card interface operating condition */
+ /* Argument: - [31:12]: Reserved (shall be set to '0')
+ - [11:8]: Supply Voltage (VHS) 0x1 (Range: 2.7-3.6 V)
+ - [7:0]: Check Pattern (recommended 0xAA) */
+ /* CMD Response: R7 */
+ sdio_cmdinitstructure.Argument = SD_CHECK_PATTERN;
+ sdio_cmdinitstructure.CmdIndex = SD_SDIO_SEND_IF_COND;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp7Error(hsd);
+
+ if (errorstate == SD_OK)
+ {
+ /* SD Card 2.0 */
+ hsd->CardType = STD_CAPACITY_SD_CARD_V2_0;
+ sdtype = SD_HIGH_CAPACITY;
+ }
+
+ /* Send CMD55 */
+ sdio_cmdinitstructure.Argument = 0;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_CMD;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD);
+
+ /* If errorstate is Command Timeout, it is a MMC card */
+ /* If errorstate is SD_OK it is a SD card: SD card 2.0 (voltage range mismatch)
+ or SD card 1.x */
+ if(errorstate == SD_OK)
+ {
+ /* SD CARD */
+ /* Send ACMD41 SD_APP_OP_COND with Argument 0x80100000 */
+ while((!validvoltage) && (count < SD_MAX_VOLT_TRIAL))
+ {
+
+ /* SEND CMD55 APP_CMD with RCA as 0 */
+ sdio_cmdinitstructure.Argument = 0;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_CMD;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Send CMD41 */
+ sdio_cmdinitstructure.Argument = SD_VOLTAGE_WINDOW_SD | sdtype;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SD_APP_OP_COND;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp3Error(hsd);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Get command response */
+ response = SDIO_GetResponse(SDIO_RESP1);
+
+ /* Get operating voltage*/
+ validvoltage = (((response >> 31) == 1) ? 1 : 0);
+
+ count++;
+ }
+
+ if(count >= SD_MAX_VOLT_TRIAL)
+ {
+ errorstate = SD_INVALID_VOLTRANGE;
+
+ return errorstate;
+ }
+
+ if((response & SD_HIGH_CAPACITY) == SD_HIGH_CAPACITY) /* (response &= SD_HIGH_CAPACITY) */
+ {
+ hsd->CardType = HIGH_CAPACITY_SD_CARD;
+ }
+
+ } /* else MMC Card */
+
+ return errorstate;
+}
+
+/**
+ * @brief Turns the SDIO output signals off.
+ * @param hsd: SD handle
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_PowerOFF(SD_HandleTypeDef *hsd)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+
+ /* Set Power State to OFF */
+ SDIO_PowerState_OFF(hsd->Instance);
+
+ return errorstate;
+}
+
+/**
+ * @brief Returns the current card's status.
+ * @param hsd: SD handle
+ * @param pCardStatus: pointer to the buffer that will contain the SD card
+ * status (Card Status register)
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_SendStatus(SD_HandleTypeDef *hsd, uint32_t *pCardStatus)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+
+ if(pCardStatus == NULL)
+ {
+ errorstate = SD_INVALID_PARAMETER;
+
+ return errorstate;
+ }
+
+ /* Send Status command */
+ sdio_cmdinitstructure.Argument = (uint32_t)(hsd->RCA << 16);
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SEND_STATUS;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_SEND_STATUS);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Get SD card status */
+ *pCardStatus = SDIO_GetResponse(SDIO_RESP1);
+
+ return errorstate;
+}
+
+/**
+ * @brief Checks for error conditions for CMD0.
+ * @param hsd: SD handle
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_CmdError(SD_HandleTypeDef *hsd)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ uint32_t timeout, tmp;
+
+ timeout = SDIO_CMD0TIMEOUT;
+
+ tmp = __HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CMDSENT);
+
+ while((timeout > 0) && (!tmp))
+ {
+ tmp = __HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CMDSENT);
+ timeout--;
+ }
+
+ if(timeout == 0)
+ {
+ errorstate = SD_CMD_RSP_TIMEOUT;
+ return errorstate;
+ }
+
+ /* Clear all the static flags */
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+ return errorstate;
+}
+
+/**
+ * @brief Checks for error conditions for R7 response.
+ * @param hsd: SD handle
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_CmdResp7Error(SD_HandleTypeDef *hsd)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_ERROR;
+ uint32_t timeout = SDIO_CMD0TIMEOUT, tmp;
+
+ tmp = __HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT);
+
+ while((!tmp) && (timeout > 0))
+ {
+ tmp = __HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT);
+ timeout--;
+ }
+
+ tmp = __HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT);
+
+ if((timeout == 0) || tmp)
+ {
+ /* Card is not V2.0 compliant or card does not support the set voltage range */
+ errorstate = SD_CMD_RSP_TIMEOUT;
+
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT);
+
+ return errorstate;
+ }
+
+ if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CMDREND))
+ {
+ /* Card is SD V2.0 compliant */
+ errorstate = SD_OK;
+
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CMDREND);
+
+ return errorstate;
+ }
+
+ return errorstate;
+}
+
+/**
+ * @brief Checks for error conditions for R1 response.
+ * @param hsd: SD handle
+ * @param SD_CMD: The sent command index
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_CmdResp1Error(SD_HandleTypeDef *hsd, uint8_t SD_CMD)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ uint32_t response_r1;
+
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT))
+ {
+ }
+
+ if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT))
+ {
+ errorstate = SD_CMD_RSP_TIMEOUT;
+
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT);
+
+ return errorstate;
+ }
+ else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL))
+ {
+ errorstate = SD_CMD_CRC_FAIL;
+
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CCRCFAIL);
+
+ return errorstate;
+ }
+
+ /* Check response received is of desired command */
+ if(SDIO_GetCommandResponse(hsd->Instance) != SD_CMD)
+ {
+ errorstate = SD_ILLEGAL_CMD;
+
+ return errorstate;
+ }
+
+ /* Clear all the static flags */
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+ /* We have received response, retrieve it for analysis */
+ response_r1 = SDIO_GetResponse(SDIO_RESP1);
+
+ if((response_r1 & SD_OCR_ERRORBITS) == SD_ALLZERO)
+ {
+ return errorstate;
+ }
+
+ if((response_r1 & SD_OCR_ADDR_OUT_OF_RANGE) == SD_OCR_ADDR_OUT_OF_RANGE)
+ {
+ return(SD_ADDR_OUT_OF_RANGE);
+ }
+
+ if((response_r1 & SD_OCR_ADDR_MISALIGNED) == SD_OCR_ADDR_MISALIGNED)
+ {
+ return(SD_ADDR_MISALIGNED);
+ }
+
+ if((response_r1 & SD_OCR_BLOCK_LEN_ERR) == SD_OCR_BLOCK_LEN_ERR)
+ {
+ return(SD_BLOCK_LEN_ERR);
+ }
+
+ if((response_r1 & SD_OCR_ERASE_SEQ_ERR) == SD_OCR_ERASE_SEQ_ERR)
+ {
+ return(SD_ERASE_SEQ_ERR);
+ }
+
+ if((response_r1 & SD_OCR_BAD_ERASE_PARAM) == SD_OCR_BAD_ERASE_PARAM)
+ {
+ return(SD_BAD_ERASE_PARAM);
+ }
+
+ if((response_r1 & SD_OCR_WRITE_PROT_VIOLATION) == SD_OCR_WRITE_PROT_VIOLATION)
+ {
+ return(SD_WRITE_PROT_VIOLATION);
+ }
+
+ if((response_r1 & SD_OCR_LOCK_UNLOCK_FAILED) == SD_OCR_LOCK_UNLOCK_FAILED)
+ {
+ return(SD_LOCK_UNLOCK_FAILED);
+ }
+
+ if((response_r1 & SD_OCR_COM_CRC_FAILED) == SD_OCR_COM_CRC_FAILED)
+ {
+ return(SD_COM_CRC_FAILED);
+ }
+
+ if((response_r1 & SD_OCR_ILLEGAL_CMD) == SD_OCR_ILLEGAL_CMD)
+ {
+ return(SD_ILLEGAL_CMD);
+ }
+
+ if((response_r1 & SD_OCR_CARD_ECC_FAILED) == SD_OCR_CARD_ECC_FAILED)
+ {
+ return(SD_CARD_ECC_FAILED);
+ }
+
+ if((response_r1 & SD_OCR_CC_ERROR) == SD_OCR_CC_ERROR)
+ {
+ return(SD_CC_ERROR);
+ }
+
+ if((response_r1 & SD_OCR_GENERAL_UNKNOWN_ERROR) == SD_OCR_GENERAL_UNKNOWN_ERROR)
+ {
+ return(SD_GENERAL_UNKNOWN_ERROR);
+ }
+
+ if((response_r1 & SD_OCR_STREAM_READ_UNDERRUN) == SD_OCR_STREAM_READ_UNDERRUN)
+ {
+ return(SD_STREAM_READ_UNDERRUN);
+ }
+
+ if((response_r1 & SD_OCR_STREAM_WRITE_OVERRUN) == SD_OCR_STREAM_WRITE_OVERRUN)
+ {
+ return(SD_STREAM_WRITE_OVERRUN);
+ }
+
+ if((response_r1 & SD_OCR_CID_CSD_OVERWRITE) == SD_OCR_CID_CSD_OVERWRITE)
+ {
+ return(SD_CID_CSD_OVERWRITE);
+ }
+
+ if((response_r1 & SD_OCR_WP_ERASE_SKIP) == SD_OCR_WP_ERASE_SKIP)
+ {
+ return(SD_WP_ERASE_SKIP);
+ }
+
+ if((response_r1 & SD_OCR_CARD_ECC_DISABLED) == SD_OCR_CARD_ECC_DISABLED)
+ {
+ return(SD_CARD_ECC_DISABLED);
+ }
+
+ if((response_r1 & SD_OCR_ERASE_RESET) == SD_OCR_ERASE_RESET)
+ {
+ return(SD_ERASE_RESET);
+ }
+
+ if((response_r1 & SD_OCR_AKE_SEQ_ERROR) == SD_OCR_AKE_SEQ_ERROR)
+ {
+ return(SD_AKE_SEQ_ERROR);
+ }
+
+ return errorstate;
+}
+
+/**
+ * @brief Checks for error conditions for R3 (OCR) response.
+ * @param hsd: SD handle
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_CmdResp3Error(SD_HandleTypeDef *hsd)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+
+ while (!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT))
+ {
+ }
+
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT))
+ {
+ errorstate = SD_CMD_RSP_TIMEOUT;
+
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT);
+
+ return errorstate;
+ }
+
+ /* Clear all the static flags */
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+ return errorstate;
+}
+
+/**
+ * @brief Checks for error conditions for R2 (CID or CSD) response.
+ * @param hsd: SD handle
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_CmdResp2Error(SD_HandleTypeDef *hsd)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+
+ while (!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT))
+ {
+ }
+
+ if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT))
+ {
+ errorstate = SD_CMD_RSP_TIMEOUT;
+
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT);
+
+ return errorstate;
+ }
+ else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL))
+ {
+ errorstate = SD_CMD_CRC_FAIL;
+
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CCRCFAIL);
+
+ return errorstate;
+ }
+ else
+ {
+ /* No error flag set */
+ }
+
+ /* Clear all the static flags */
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+ return errorstate;
+}
+
+/**
+ * @brief Checks for error conditions for R6 (RCA) response.
+ * @param hsd: SD handle
+ * @param SD_CMD: The sent command index
+ * @param pRCA: Pointer to the variable that will contain the SD card relative
+ * address RCA
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_CmdResp6Error(SD_HandleTypeDef *hsd, uint8_t SD_CMD, uint16_t *pRCA)
+{
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ uint32_t response_r1;
+
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT))
+ {
+ }
+
+ if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT))
+ {
+ errorstate = SD_CMD_RSP_TIMEOUT;
+
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT);
+
+ return errorstate;
+ }
+ else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL))
+ {
+ errorstate = SD_CMD_CRC_FAIL;
+
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CCRCFAIL);
+
+ return errorstate;
+ }
+ else
+ {
+ /* No error flag set */
+ }
+
+ /* Check response received is of desired command */
+ if(SDIO_GetCommandResponse(hsd->Instance) != SD_CMD)
+ {
+ errorstate = SD_ILLEGAL_CMD;
+
+ return errorstate;
+ }
+
+ /* Clear all the static flags */
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+ /* We have received response, retrieve it. */
+ response_r1 = SDIO_GetResponse(SDIO_RESP1);
+
+ if((response_r1 & (SD_R6_GENERAL_UNKNOWN_ERROR | SD_R6_ILLEGAL_CMD | SD_R6_COM_CRC_FAILED)) == SD_ALLZERO)
+ {
+ *pRCA = (uint16_t) (response_r1 >> 16);
+
+ return errorstate;
+ }
+
+ if((response_r1 & SD_R6_GENERAL_UNKNOWN_ERROR) == SD_R6_GENERAL_UNKNOWN_ERROR)
+ {
+ return(SD_GENERAL_UNKNOWN_ERROR);
+ }
+
+ if((response_r1 & SD_R6_ILLEGAL_CMD) == SD_R6_ILLEGAL_CMD)
+ {
+ return(SD_ILLEGAL_CMD);
+ }
+
+ if((response_r1 & SD_R6_COM_CRC_FAILED) == SD_R6_COM_CRC_FAILED)
+ {
+ return(SD_COM_CRC_FAILED);
+ }
+
+ return errorstate;
+}
+
+/**
+ * @brief Enables the SDIO wide bus mode.
+ * @param hsd: SD handle
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_WideBus_Enable(SD_HandleTypeDef *hsd)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+
+ uint32_t scr[2] = {0, 0};
+
+ if((SDIO_GetResponse(SDIO_RESP1) & SD_CARD_LOCKED) == SD_CARD_LOCKED)
+ {
+ errorstate = SD_LOCK_UNLOCK_FAILED;
+
+ return errorstate;
+ }
+
+ /* Get SCR Register */
+ errorstate = SD_FindSCR(hsd, scr);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* If requested card supports wide bus operation */
+ if((scr[1] & SD_WIDE_BUS_SUPPORT) != SD_ALLZERO)
+ {
+ /* Send CMD55 APP_CMD with argument as card's RCA.*/
+ sdio_cmdinitstructure.Argument = (uint32_t)(hsd->RCA << 16);
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_CMD;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Send ACMD6 APP_CMD with argument as 2 for wide bus mode */
+ sdio_cmdinitstructure.Argument = 2;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_SD_SET_BUSWIDTH;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_SD_SET_BUSWIDTH);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ return errorstate;
+ }
+ else
+ {
+ errorstate = SD_REQUEST_NOT_APPLICABLE;
+
+ return errorstate;
+ }
+}
+
+/**
+ * @brief Disables the SDIO wide bus mode.
+ * @param hsd: SD handle
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_WideBus_Disable(SD_HandleTypeDef *hsd)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+
+ uint32_t scr[2] = {0, 0};
+
+ if((SDIO_GetResponse(SDIO_RESP1) & SD_CARD_LOCKED) == SD_CARD_LOCKED)
+ {
+ errorstate = SD_LOCK_UNLOCK_FAILED;
+
+ return errorstate;
+ }
+
+ /* Get SCR Register */
+ errorstate = SD_FindSCR(hsd, scr);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* If requested card supports 1 bit mode operation */
+ if((scr[1] & SD_SINGLE_BUS_SUPPORT) != SD_ALLZERO)
+ {
+ /* Send CMD55 APP_CMD with argument as card's RCA */
+ sdio_cmdinitstructure.Argument = (uint32_t)(hsd->RCA << 16);
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_CMD;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Send ACMD6 APP_CMD with argument as 0 for single bus mode */
+ sdio_cmdinitstructure.Argument = 0;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_SD_SET_BUSWIDTH;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_SD_SET_BUSWIDTH);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ return errorstate;
+ }
+ else
+ {
+ errorstate = SD_REQUEST_NOT_APPLICABLE;
+
+ return errorstate;
+ }
+}
+
+
+/**
+ * @brief Finds the SD card SCR register value.
+ * @param hsd: SD handle
+ * @param pSCR: pointer to the buffer that will contain the SCR value
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_FindSCR(SD_HandleTypeDef *hsd, uint32_t *pSCR)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ SDIO_DataInitTypeDef sdio_datainitstructure;
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ uint32_t index = 0;
+ uint32_t tempscr[2] = {0, 0};
+
+ /* Set Block Size To 8 Bytes */
+ /* Send CMD55 APP_CMD with argument as card's RCA */
+ sdio_cmdinitstructure.Argument = (uint32_t)8;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+
+ /* Send CMD55 APP_CMD with argument as card's RCA */
+ sdio_cmdinitstructure.Argument = (uint32_t)((hsd->RCA) << 16);
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_CMD;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+ sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT;
+ sdio_datainitstructure.DataLength = 8;
+ sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_8B;
+ sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO;
+ sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
+ sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE;
+ SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure);
+
+ /* Send ACMD51 SD_APP_SEND_SCR with argument as 0 */
+ sdio_cmdinitstructure.Argument = 0;
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SD_APP_SEND_SCR;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ /* Check for error conditions */
+ errorstate = SD_CmdResp1Error(hsd, SD_CMD_SD_APP_SEND_SCR);
+
+ if(errorstate != SD_OK)
+ {
+ return errorstate;
+ }
+#ifdef SDIO_STA_STBITERR
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR))
+#else /* SDIO_STA_STBITERR not defined */
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND))
+#endif /* SDIO_STA_STBITERR */
+ {
+ if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXDAVL))
+ {
+ *(tempscr + index) = SDIO_ReadFIFO(hsd->Instance);
+ index++;
+ }
+ }
+
+ if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT);
+
+ errorstate = SD_DATA_TIMEOUT;
+
+ return errorstate;
+ }
+ else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL);
+
+ errorstate = SD_DATA_CRC_FAIL;
+
+ return errorstate;
+ }
+ else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_RXOVERR);
+
+ errorstate = SD_RX_OVERRUN;
+
+ return errorstate;
+ }
+#ifdef SDIO_STA_STBITERR
+ else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_STBITERR))
+ {
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR);
+
+ errorstate = SD_START_BIT_ERR;
+
+ return errorstate;
+ }
+#endif /* SDIO_STA_STBITERR */
+ else
+ {
+ /* No error flag set */
+ }
+
+ /* Clear all the static flags */
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+ *(pSCR + 1) = ((tempscr[0] & SD_0TO7BITS) << 24) | ((tempscr[0] & SD_8TO15BITS) << 8) |\
+ ((tempscr[0] & SD_16TO23BITS) >> 8) | ((tempscr[0] & SD_24TO31BITS) >> 24);
+
+ *(pSCR) = ((tempscr[1] & SD_0TO7BITS) << 24) | ((tempscr[1] & SD_8TO15BITS) << 8) |\
+ ((tempscr[1] & SD_16TO23BITS) >> 8) | ((tempscr[1] & SD_24TO31BITS) >> 24);
+
+ return errorstate;
+}
+
+/**
+ * @brief Checks if the SD card is in programming state.
+ * @param hsd: SD handle
+ * @param pStatus: pointer to the variable that will contain the SD card state
+ * @retval SD Card error state
+ */
+static HAL_SD_ErrorTypedef SD_IsCardProgramming(SD_HandleTypeDef *hsd, uint8_t *pStatus)
+{
+ SDIO_CmdInitTypeDef sdio_cmdinitstructure;
+ HAL_SD_ErrorTypedef errorstate = SD_OK;
+ __IO uint32_t responseR1 = 0;
+
+ sdio_cmdinitstructure.Argument = (uint32_t)(hsd->RCA << 16);
+ sdio_cmdinitstructure.CmdIndex = SD_CMD_SEND_STATUS;
+ sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
+ sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
+ sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
+ SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
+
+ while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT))
+ {
+ }
+
+ if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT))
+ {
+ errorstate = SD_CMD_RSP_TIMEOUT;
+
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT);
+
+ return errorstate;
+ }
+ else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL))
+ {
+ errorstate = SD_CMD_CRC_FAIL;
+
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CCRCFAIL);
+
+ return errorstate;
+ }
+ else
+ {
+ /* No error flag set */
+ }
+
+ /* Check response received is of desired command */
+ if((uint32_t)SDIO_GetCommandResponse(hsd->Instance) != SD_CMD_SEND_STATUS)
+ {
+ errorstate = SD_ILLEGAL_CMD;
+
+ return errorstate;
+ }
+
+ /* Clear all the static flags */
+ __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+
+ /* We have received response, retrieve it for analysis */
+ responseR1 = SDIO_GetResponse(SDIO_RESP1);
+
+ /* Find out card status */
+ *pStatus = (uint8_t)((responseR1 >> 9) & 0x0000000F);
+
+ if((responseR1 & SD_OCR_ERRORBITS) == SD_ALLZERO)
+ {
+ return errorstate;
+ }
+
+ if((responseR1 & SD_OCR_ADDR_OUT_OF_RANGE) == SD_OCR_ADDR_OUT_OF_RANGE)
+ {
+ return(SD_ADDR_OUT_OF_RANGE);
+ }
+
+ if((responseR1 & SD_OCR_ADDR_MISALIGNED) == SD_OCR_ADDR_MISALIGNED)
+ {
+ return(SD_ADDR_MISALIGNED);
+ }
+
+ if((responseR1 & SD_OCR_BLOCK_LEN_ERR) == SD_OCR_BLOCK_LEN_ERR)
+ {
+ return(SD_BLOCK_LEN_ERR);
+ }
+
+ if((responseR1 & SD_OCR_ERASE_SEQ_ERR) == SD_OCR_ERASE_SEQ_ERR)
+ {
+ return(SD_ERASE_SEQ_ERR);
+ }
+
+ if((responseR1 & SD_OCR_BAD_ERASE_PARAM) == SD_OCR_BAD_ERASE_PARAM)
+ {
+ return(SD_BAD_ERASE_PARAM);
+ }
+
+ if((responseR1 & SD_OCR_WRITE_PROT_VIOLATION) == SD_OCR_WRITE_PROT_VIOLATION)
+ {
+ return(SD_WRITE_PROT_VIOLATION);
+ }
+
+ if((responseR1 & SD_OCR_LOCK_UNLOCK_FAILED) == SD_OCR_LOCK_UNLOCK_FAILED)
+ {
+ return(SD_LOCK_UNLOCK_FAILED);
+ }
+
+ if((responseR1 & SD_OCR_COM_CRC_FAILED) == SD_OCR_COM_CRC_FAILED)
+ {
+ return(SD_COM_CRC_FAILED);
+ }
+
+ if((responseR1 & SD_OCR_ILLEGAL_CMD) == SD_OCR_ILLEGAL_CMD)
+ {
+ return(SD_ILLEGAL_CMD);
+ }
+
+ if((responseR1 & SD_OCR_CARD_ECC_FAILED) == SD_OCR_CARD_ECC_FAILED)
+ {
+ return(SD_CARD_ECC_FAILED);
+ }
+
+ if((responseR1 & SD_OCR_CC_ERROR) == SD_OCR_CC_ERROR)
+ {
+ return(SD_CC_ERROR);
+ }
+
+ if((responseR1 & SD_OCR_GENERAL_UNKNOWN_ERROR) == SD_OCR_GENERAL_UNKNOWN_ERROR)
+ {
+ return(SD_GENERAL_UNKNOWN_ERROR);
+ }
+
+ if((responseR1 & SD_OCR_STREAM_READ_UNDERRUN) == SD_OCR_STREAM_READ_UNDERRUN)
+ {
+ return(SD_STREAM_READ_UNDERRUN);
+ }
+
+ if((responseR1 & SD_OCR_STREAM_WRITE_OVERRUN) == SD_OCR_STREAM_WRITE_OVERRUN)
+ {
+ return(SD_STREAM_WRITE_OVERRUN);
+ }
+
+ if((responseR1 & SD_OCR_CID_CSD_OVERWRITE) == SD_OCR_CID_CSD_OVERWRITE)
+ {
+ return(SD_CID_CSD_OVERWRITE);
+ }
+
+ if((responseR1 & SD_OCR_WP_ERASE_SKIP) == SD_OCR_WP_ERASE_SKIP)
+ {
+ return(SD_WP_ERASE_SKIP);
+ }
+
+ if((responseR1 & SD_OCR_CARD_ECC_DISABLED) == SD_OCR_CARD_ECC_DISABLED)
+ {
+ return(SD_CARD_ECC_DISABLED);
+ }
+
+ if((responseR1 & SD_OCR_ERASE_RESET) == SD_OCR_ERASE_RESET)
+ {
+ return(SD_ERASE_RESET);
+ }
+
+ if((responseR1 & SD_OCR_AKE_SEQ_ERROR) == SD_OCR_AKE_SEQ_ERROR)
+ {
+ return(SD_AKE_SEQ_ERROR);
+ }
+
+ return errorstate;
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_SD_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|