diff options
Diffstat (limited to 'Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c')
| -rw-r--r-- | Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c | 624 |
1 files changed, 624 insertions, 0 deletions
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c new file mode 100644 index 0000000..c3ae4ed --- /dev/null +++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c @@ -0,0 +1,624 @@ +/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pwr_ex.c
+ * @author MCD Application Team
+ * @version V1.3.2
+ * @date 26-June-2015
+ * @brief Extended PWR HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of PWR extension peripheral:
+ * + Peripheral Extended features functions
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup PWREx PWREx
+ * @brief PWR HAL module driver
+ * @{
+ */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup PWREx_Private_Constants
+ * @{
+ */
+#define PWR_OVERDRIVE_TIMEOUT_VALUE 1000
+#define PWR_UDERDRIVE_TIMEOUT_VALUE 1000
+#define PWR_BKPREG_TIMEOUT_VALUE 1000
+#define PWR_VOSRDY_TIMEOUT_VALUE 1000
+/**
+ * @}
+ */
+
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Functions PWREx Exported Functions
+ * @{
+ */
+
+/** @defgroup PWREx_Exported_Functions_Group1 Peripheral Extended features functions
+ * @brief Peripheral Extended features functions
+ *
+@verbatim
+
+ ===============================================================================
+ ##### Peripheral extended features functions #####
+ ===============================================================================
+
+ *** Main and Backup Regulators configuration ***
+ ================================================
+ [..]
+ (+) The backup domain includes 4 Kbytes of backup SRAM accessible only from
+ the CPU, and address in 32-bit, 16-bit or 8-bit mode. Its content is
+ retained even in Standby or VBAT mode when the low power backup regulator
+ is enabled. It can be considered as an internal EEPROM when VBAT is
+ always present. You can use the HAL_PWREx_EnableBkUpReg() function to
+ enable the low power backup regulator.
+
+ (+) When the backup domain is supplied by VDD (analog switch connected to VDD)
+ the backup SRAM is powered from VDD which replaces the VBAT power supply to
+ save battery life.
+
+ (+) The backup SRAM is not mass erased by a tamper event. It is read
+ protected to prevent confidential data, such as cryptographic private
+ key, from being accessed. The backup SRAM can be erased only through
+ the Flash interface when a protection level change from level 1 to
+ level 0 is requested.
+ -@- Refer to the description of Read protection (RDP) in the Flash
+ programming manual.
+
+ (+) The main internal regulator can be configured to have a tradeoff between
+ performance and power consumption when the device does not operate at
+ the maximum frequency. This is done through __HAL_PWR_MAINREGULATORMODE_CONFIG()
+ macro which configure VOS bit in PWR_CR register
+
+ Refer to the product datasheets for more details.
+
+ *** FLASH Power Down configuration ****
+ =======================================
+ [..]
+ (+) By setting the FPDS bit in the PWR_CR register by using the
+ HAL_PWREx_EnableFlashPowerDown() function, the Flash memory also enters power
+ down mode when the device enters Stop mode. When the Flash memory
+ is in power down mode, an additional startup delay is incurred when
+ waking up from Stop mode.
+
+ (+) For STM32F42xxx/43xxx Devices, the scale can be modified only when the PLL
+ is OFF and the HSI or HSE clock source is selected as system clock.
+ The new value programmed is active only when the PLL is ON.
+ When the PLL is OFF, the voltage scale 3 is automatically selected.
+ Refer to the datasheets for more details.
+
+ *** Over-Drive and Under-Drive configuration ****
+ =================================================
+ [..]
+ (+) For STM32F42xxx/43xxx Devices, in Run mode: the main regulator has
+ 2 operating modes available:
+ (++) Normal mode: The CPU and core logic operate at maximum frequency at a given
+ voltage scaling (scale 1, scale 2 or scale 3)
+ (++) Over-drive mode: This mode allows the CPU and the core logic to operate at a
+ higher frequency than the normal mode for a given voltage scaling (scale 1,
+ scale 2 or scale 3). This mode is enabled through HAL_PWREx_EnableOverDrive() function and
+ disabled by HAL_PWREx_DisableOverDrive() function, to enter or exit from Over-drive mode please follow
+ the sequence described in Reference manual.
+
+ (+) For STM32F42xxx/43xxx Devices, in Stop mode: the main regulator or low power regulator
+ supplies a low power voltage to the 1.2V domain, thus preserving the content of registers
+ and internal SRAM. 2 operating modes are available:
+ (++) Normal mode: the 1.2V domain is preserved in nominal leakage mode. This mode is only
+ available when the main regulator or the low power regulator is used in Scale 3 or
+ low voltage mode.
+ (++) Under-drive mode: the 1.2V domain is preserved in reduced leakage mode. This mode is only
+ available when the main regulator or the low power regulator is in low voltage mode.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enables the Backup Regulator.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void)
+{
+ uint32_t tickstart = 0;
+
+ *(__IO uint32_t *) CSR_BRE_BB = (uint32_t)ENABLE;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till Backup regulator ready flag is set */
+ while(__HAL_PWR_GET_FLAG(PWR_FLAG_BRR) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PWR_BKPREG_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables the Backup Regulator.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void)
+{
+ uint32_t tickstart = 0;
+
+ *(__IO uint32_t *) CSR_BRE_BB = (uint32_t)DISABLE;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait till Backup regulator ready flag is set */
+ while(__HAL_PWR_GET_FLAG(PWR_FLAG_BRR) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PWR_BKPREG_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Enables the Flash Power Down in Stop mode.
+ * @retval None
+ */
+void HAL_PWREx_EnableFlashPowerDown(void)
+{
+ *(__IO uint32_t *) CR_FPDS_BB = (uint32_t)ENABLE;
+}
+
+/**
+ * @brief Disables the Flash Power Down in Stop mode.
+ * @retval None
+ */
+void HAL_PWREx_DisableFlashPowerDown(void)
+{
+ *(__IO uint32_t *) CR_FPDS_BB = (uint32_t)DISABLE;
+}
+
+/**
+ * @brief Return Voltage Scaling Range.
+ * @retval The configured scale for the regulator voltage(VOS bit field).
+ * The returned value can be one of the following:
+ * - @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode
+ * - @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode
+ * - @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode
+ */
+uint32_t HAL_PWREx_GetVoltageRange(void)
+{
+ return (PWR->CR & PWR_CR_VOS);
+}
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+/**
+ * @brief Configures the main internal regulator output voltage.
+ * @param VoltageScaling: specifies the regulator output voltage to achieve
+ * a tradeoff between performance and power consumption.
+ * This parameter can be one of the following values:
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output range 1 mode,
+ * the maximum value of fHCLK = 168 MHz.
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output range 2 mode,
+ * the maximum value of fHCLK = 144 MHz.
+ * @note When moving from Range 1 to Range 2, the system frequency must be decreased to
+ * a value below 144 MHz before calling HAL_PWREx_ConfigVoltageScaling() API.
+ * When moving from Range 2 to Range 1, the system frequency can be increased to
+ * a value up to 168 MHz after calling HAL_PWREx_ConfigVoltageScaling() API.
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling)
+{
+ uint32_t tickstart = 0;
+
+ assert_param(IS_PWR_VOLTAGE_SCALING_RANGE(VoltageScaling));
+
+ /* Enable PWR RCC Clock Peripheral */
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* Set Range */
+ __HAL_PWR_VOLTAGESCALING_CONFIG(VoltageScaling);
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+ while((__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY) == RESET))
+ {
+ if((HAL_GetTick() - tickstart ) > PWR_VOSRDY_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ return HAL_OK;
+}
+
+#elif defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+/**
+ * @brief Configures the main internal regulator output voltage.
+ * @param VoltageScaling: specifies the regulator output voltage to achieve
+ * a tradeoff between performance and power consumption.
+ * This parameter can be one of the following values:
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output range 1 mode,
+ * the maximum value of fHCLK is 168 MHz. It can be extended to
+ * 180 MHz by activating the over-drive mode.
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output range 2 mode,
+ * the maximum value of fHCLK is 144 MHz. It can be extended to,
+ * 168 MHz by activating the over-drive mode.
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output range 3 mode,
+ * the maximum value of fHCLK is 120 MHz.
+ * @note To update the system clock frequency(SYSCLK):
+ * - Set the HSI or HSE as system clock frequency using the HAL_RCC_ClockConfig().
+ * - Call the HAL_RCC_OscConfig() to configure the PLL.
+ * - Call HAL_PWREx_ConfigVoltageScaling() API to adjust the voltage scale.
+ * - Set the new system clock frequency using the HAL_RCC_ClockConfig().
+ * @note The scale can be modified only when the HSI or HSE clock source is selected
+ * as system clock source, otherwise the API returns HAL_ERROR.
+ * @note When the PLL is OFF, the voltage scale 3 is automatically selected and the VOS bits
+ * value in the PWR_CR1 register are not taken in account.
+ * @note This API forces the PLL state ON to allow the possibility to configure the voltage scale 1 or 2.
+ * @note The new voltage scale is active only when the PLL is ON.
+ * @retval HAL Status
+ */
+HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling)
+{
+ uint32_t tickstart = 0;
+
+ assert_param(IS_PWR_VOLTAGE_SCALING_RANGE(VoltageScaling));
+
+ /* Enable PWR RCC Clock Peripheral */
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* Check if the PLL is used as system clock or not */
+ if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_CFGR_SWS_PLL)
+ {
+ /* Disable the main PLL */
+ __HAL_RCC_PLL_DISABLE();
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLL is disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set Range */
+ __HAL_PWR_VOLTAGESCALING_CONFIG(VoltageScaling);
+
+ /* Enable the main PLL */
+ __HAL_RCC_PLL_ENABLE();
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+ /* Wait till PLL is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Get Start Tick */
+ tickstart = HAL_GetTick();
+ while((__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY) == RESET))
+ {
+ if((HAL_GetTick() - tickstart ) > PWR_VOSRDY_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+
+ return HAL_OK;
+}
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+/**
+ * @brief Enables Main Regulator low voltage mode.
+ * @note This mode is only available for STM32F401xx/STM32F411xx devices.
+ * @retval None
+ */
+void HAL_PWREx_EnableMainRegulatorLowVoltage(void)
+{
+ *(__IO uint32_t *) CR_MRLVDS_BB = (uint32_t)ENABLE;
+}
+
+/**
+ * @brief Disables Main Regulator low voltage mode.
+ * @note This mode is only available for STM32F401xx/STM32F411xx devices.
+ * @retval None
+ */
+void HAL_PWREx_DisableMainRegulatorLowVoltage(void)
+{
+ *(__IO uint32_t *) CR_MRLVDS_BB = (uint32_t)DISABLE;
+}
+
+/**
+ * @brief Enables Low Power Regulator low voltage mode.
+ * @note This mode is only available for STM32F401xx/STM32F411xx devices.
+ * @retval None
+ */
+void HAL_PWREx_EnableLowRegulatorLowVoltage(void)
+{
+ *(__IO uint32_t *) CR_LPLVDS_BB = (uint32_t)ENABLE;
+}
+
+/**
+ * @brief Disables Low Power Regulator low voltage mode.
+ * @note This mode is only available for STM32F401xx/STM32F411xx devices.
+ * @retval None
+ */
+void HAL_PWREx_DisableLowRegulatorLowVoltage(void)
+{
+ *(__IO uint32_t *) CR_LPLVDS_BB = (uint32_t)DISABLE;
+}
+
+#endif /* STM32F401xC || STM32F401xE || STM32F411xE */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+/**
+ * @brief Activates the Over-Drive mode.
+ * @note This function can be used only for STM32F42xx/STM32F43xx devices.
+ * This mode allows the CPU and the core logic to operate at a higher frequency
+ * than the normal mode for a given voltage scaling (scale 1, scale 2 or scale 3).
+ * @note It is recommended to enter or exit Over-drive mode when the application is not running
+ * critical tasks and when the system clock source is either HSI or HSE.
+ * During the Over-drive switch activation, no peripheral clocks should be enabled.
+ * The peripheral clocks must be enabled once the Over-drive mode is activated.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void)
+{
+ uint32_t tickstart = 0;
+
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* Enable the Over-drive to extend the clock frequency to 180 Mhz */
+ __HAL_PWR_OVERDRIVE_ENABLE();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(!__HAL_PWR_GET_FLAG(PWR_FLAG_ODRDY))
+ {
+ if((HAL_GetTick() - tickstart ) > PWR_OVERDRIVE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Enable the Over-drive switch */
+ __HAL_PWR_OVERDRIVESWITCHING_ENABLE();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(!__HAL_PWR_GET_FLAG(PWR_FLAG_ODSWRDY))
+ {
+ if((HAL_GetTick() - tickstart ) > PWR_OVERDRIVE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Deactivates the Over-Drive mode.
+ * @note This function can be used only for STM32F42xx/STM32F43xx devices.
+ * This mode allows the CPU and the core logic to operate at a higher frequency
+ * than the normal mode for a given voltage scaling (scale 1, scale 2 or scale 3).
+ * @note It is recommended to enter or exit Over-drive mode when the application is not running
+ * critical tasks and when the system clock source is either HSI or HSE.
+ * During the Over-drive switch activation, no peripheral clocks should be enabled.
+ * The peripheral clocks must be enabled once the Over-drive mode is activated.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void)
+{
+ uint32_t tickstart = 0;
+
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* Disable the Over-drive switch */
+ __HAL_PWR_OVERDRIVESWITCHING_DISABLE();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(__HAL_PWR_GET_FLAG(PWR_FLAG_ODSWRDY))
+ {
+ if((HAL_GetTick() - tickstart ) > PWR_OVERDRIVE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Disable the Over-drive */
+ __HAL_PWR_OVERDRIVE_DISABLE();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ while(__HAL_PWR_GET_FLAG(PWR_FLAG_ODRDY))
+ {
+ if((HAL_GetTick() - tickstart ) > PWR_OVERDRIVE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enters in Under-Drive STOP mode.
+ *
+ * @note This mode is only available for STM32F42xxx/STM324F3xxx devices.
+ *
+ * @note This mode can be selected only when the Under-Drive is already active
+ *
+ * @note This mode is enabled only with STOP low power mode.
+ * In this mode, the 1.2V domain is preserved in reduced leakage mode. This
+ * mode is only available when the main regulator or the low power regulator
+ * is in low voltage mode
+ *
+ * @note If the Under-drive mode was enabled, it is automatically disabled after
+ * exiting Stop mode.
+ * When the voltage regulator operates in Under-drive mode, an additional
+ * startup delay is induced when waking up from Stop mode.
+ *
+ * @note In Stop mode, all I/O pins keep the same state as in Run mode.
+ *
+ * @note When exiting Stop mode by issuing an interrupt or a wake-up event,
+ * the HSI RC oscillator is selected as system clock.
+ *
+ * @note When the voltage regulator operates in low power mode, an additional
+ * startup delay is incurred when waking up from Stop mode.
+ * By keeping the internal regulator ON during Stop mode, the consumption
+ * is higher although the startup time is reduced.
+ *
+ * @param Regulator: specifies the regulator state in STOP mode.
+ * This parameter can be one of the following values:
+ * @arg PWR_MAINREGULATOR_UNDERDRIVE_ON: Main Regulator in under-drive mode
+ * and Flash memory in power-down when the device is in Stop under-drive mode
+ * @arg PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON: Low Power Regulator in under-drive mode
+ * and Flash memory in power-down when the device is in Stop under-drive mode
+ * @param STOPEntry: specifies if STOP mode in entered with WFI or WFE instruction.
+ * This parameter can be one of the following values:
+ * @arg PWR_SLEEPENTRY_WFI: enter STOP mode with WFI instruction
+ * @arg PWR_SLEEPENTRY_WFE: enter STOP mode with WFE instruction
+ * @retval None
+ */
+HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry)
+{
+ uint32_t tmpreg1 = 0;
+ uint32_t tickstart = 0;
+
+ /* Check the parameters */
+ assert_param(IS_PWR_REGULATOR_UNDERDRIVE(Regulator));
+ assert_param(IS_PWR_STOP_ENTRY(STOPEntry));
+
+ /* Enable Power ctrl clock */
+ __HAL_RCC_PWR_CLK_ENABLE();
+ /* Enable the Under-drive Mode ---------------------------------------------*/
+ /* Clear Under-drive flag */
+ __HAL_PWR_CLEAR_ODRUDR_FLAG();
+
+ /* Enable the Under-drive */
+ __HAL_PWR_UNDERDRIVE_ENABLE();
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait for UnderDrive mode is ready */
+ while(__HAL_PWR_GET_FLAG(PWR_FLAG_UDRDY))
+ {
+ if((HAL_GetTick() - tickstart ) > PWR_UDERDRIVE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Select the regulator state in STOP mode ---------------------------------*/
+ tmpreg1 = PWR->CR;
+ /* Clear PDDS, LPDS, MRLUDS and LPLUDS bits */
+ tmpreg1 &= (uint32_t)~(PWR_CR_PDDS | PWR_CR_LPDS | PWR_CR_LPUDS | PWR_CR_MRUDS);
+
+ /* Set LPDS, MRLUDS and LPLUDS bits according to PWR_Regulator value */
+ tmpreg1 |= Regulator;
+
+ /* Store the new value */
+ PWR->CR = tmpreg1;
+
+ /* Set SLEEPDEEP bit of Cortex System Control Register */
+ SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
+
+ /* Select STOP mode entry --------------------------------------------------*/
+ if(STOPEntry == PWR_SLEEPENTRY_WFI)
+ {
+ /* Request Wait For Interrupt */
+ __WFI();
+ }
+ else
+ {
+ /* Request Wait For Event */
+ __WFE();
+ }
+ /* Reset SLEEPDEEP bit of Cortex System Control Register */
+ SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk);
+
+ return HAL_OK;
+}
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_PWR_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|