diff options
Diffstat (limited to 'Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_fmpi2c_ex.c')
| -rw-r--r-- | Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_fmpi2c_ex.c | 326 |
1 files changed, 326 insertions, 0 deletions
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_fmpi2c_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_fmpi2c_ex.c new file mode 100644 index 0000000..cf304b7 --- /dev/null +++ b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_fmpi2c_ex.c @@ -0,0 +1,326 @@ +/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_fmpi2c_ex.c
+ * @author MCD Application Team
+ * @version V1.3.2
+ * @date 26-June-2015
+ * @brief Extended FMPI2C HAL module driver.
+ *
+ * This file provides firmware functions to manage the following
+ * functionalities of the Inter Integrated Circuit (FMPI2C) peripheral:
+ * + Extended Control methods
+ *
+ @verbatim
+ ==============================================================================
+ ##### FMPI2C peripheral extended features #####
+ ==============================================================================
+
+ [..] Comparing to other previous devices, the FMPI2C interface for STM32L4XX
+ devices contains the following additional features
+
+ (+) Possibility to disable or enable Analog Noise Filter
+ (+) Use of a configured Digital Noise Filter
+ (+) Disable or enable wakeup from Stop mode
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..] This driver provides functions to configure Noise Filter
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup FMPI2CEx FMPI2CEx
+ * @brief FMPI2C HAL module driver
+ * @{
+ */
+
+#ifdef HAL_FMPI2C_MODULE_ENABLED
+
+#if defined(STM32F446xx)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup FMPI2CEx_Exported_Functions FMPI2C Extended Exported Functions
+ * @{
+ */
+
+
+/** @defgroup FMPI2CEx_Exported_Functions_Group1 Peripheral Control methods
+ * @brief management functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extension features functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Configure Noise Filters
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configures FMPI2C Analog noise filter.
+ * @param hfmpi2c : pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2Cx peripheral.
+ * @param AnalogFilter : new state of the Analog filter.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2CEx_AnalogFilter_Config(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t AnalogFilter)
+{
+ /* Check the parameters */
+ assert_param(IS_FMPI2C_ALL_INSTANCE(hfmpi2c->Instance));
+ assert_param(IS_FMPI2C_ANALOG_FILTER(AnalogFilter));
+
+ if((hfmpi2c->State == HAL_FMPI2C_STATE_BUSY) || (hfmpi2c->State == HAL_FMPI2C_STATE_MASTER_BUSY_TX) || (hfmpi2c->State == HAL_FMPI2C_STATE_MASTER_BUSY_RX)
+ || (hfmpi2c->State == HAL_FMPI2C_STATE_SLAVE_BUSY_TX) || (hfmpi2c->State == HAL_FMPI2C_STATE_SLAVE_BUSY_RX))
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY;
+
+ /* Disable the selected FMPI2C peripheral */
+ __HAL_FMPI2C_DISABLE(hfmpi2c);
+
+ /* Reset FMPI2Cx ANOFF bit */
+ hfmpi2c->Instance->CR1 &= ~(FMPI2C_CR1_ANFOFF);
+
+ /* Set analog filter bit*/
+ hfmpi2c->Instance->CR1 |= AnalogFilter;
+
+ __HAL_FMPI2C_ENABLE(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures FMPI2C Digital noise filter.
+ * @param hfmpi2c : pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2Cx peripheral.
+ * @param DigitalFilter : Coefficient of digital noise filter between 0x00 and 0x0F.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2CEx_DigitalFilter_Config(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t DigitalFilter)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_FMPI2C_ALL_INSTANCE(hfmpi2c->Instance));
+ assert_param(IS_FMPI2C_DIGITAL_FILTER(DigitalFilter));
+
+ if((hfmpi2c->State == HAL_FMPI2C_STATE_BUSY) || (hfmpi2c->State == HAL_FMPI2C_STATE_MASTER_BUSY_TX) || (hfmpi2c->State == HAL_FMPI2C_STATE_MASTER_BUSY_RX)
+ || (hfmpi2c->State == HAL_FMPI2C_STATE_SLAVE_BUSY_TX) || (hfmpi2c->State == HAL_FMPI2C_STATE_SLAVE_BUSY_RX))
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY;
+
+ /* Disable the selected FMPI2C peripheral */
+ __HAL_FMPI2C_DISABLE(hfmpi2c);
+
+ /* Get the old register value */
+ tmpreg = hfmpi2c->Instance->CR1;
+
+ /* Reset FMPI2Cx DNF bits [11:8] */
+ tmpreg &= ~(FMPI2C_CR1_DFN);
+
+ /* Set FMPI2Cx DNF coefficient */
+ tmpreg |= DigitalFilter << 8;
+
+ /* Store the new register value */
+ hfmpi2c->Instance->CR1 = tmpreg;
+
+ __HAL_FMPI2C_ENABLE(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enables FMPI2C wakeup from stop mode.
+ * @param hfmpi2c : pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2Cx peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2CEx_EnableWakeUp (FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ /* Check the parameters */
+ assert_param(IS_FMPI2C_ALL_INSTANCE(hfmpi2c->Instance));
+
+ if((hfmpi2c->State == HAL_FMPI2C_STATE_BUSY) || (hfmpi2c->State == HAL_FMPI2C_STATE_MASTER_BUSY_TX) || (hfmpi2c->State == HAL_FMPI2C_STATE_MASTER_BUSY_RX)
+ || (hfmpi2c->State == HAL_FMPI2C_STATE_SLAVE_BUSY_TX) || (hfmpi2c->State == HAL_FMPI2C_STATE_SLAVE_BUSY_RX))
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY;
+
+ /* Disable the selected FMPI2C peripheral */
+ __HAL_FMPI2C_DISABLE(hfmpi2c);
+
+ /* Enable wakeup from stop mode */
+ hfmpi2c->Instance->CR1 |= FMPI2C_CR1_WUPEN;
+
+ __HAL_FMPI2C_ENABLE(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Disables FMPI2C wakeup from stop mode.
+ * @param hfmpi2c : pointer to a FMPI2C_HandleTypeDef structure that contains
+ * the configuration information for the specified FMPI2Cx peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_FMPI2CEx_DisableWakeUp (FMPI2C_HandleTypeDef *hfmpi2c)
+{
+ /* Check the parameters */
+ assert_param(IS_FMPI2C_ALL_INSTANCE(hfmpi2c->Instance));
+
+ if((hfmpi2c->State == HAL_FMPI2C_STATE_BUSY) || (hfmpi2c->State == HAL_FMPI2C_STATE_MASTER_BUSY_TX) || (hfmpi2c->State == HAL_FMPI2C_STATE_MASTER_BUSY_RX)
+ || (hfmpi2c->State == HAL_FMPI2C_STATE_SLAVE_BUSY_TX) || (hfmpi2c->State == HAL_FMPI2C_STATE_SLAVE_BUSY_RX))
+ {
+ return HAL_BUSY;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_BUSY;
+
+ /* Disable the selected FMPI2C peripheral */
+ __HAL_FMPI2C_DISABLE(hfmpi2c);
+
+ /* Enable wakeup from stop mode */
+ hfmpi2c->Instance->CR1 &= ~(FMPI2C_CR1_WUPEN);
+
+ __HAL_FMPI2C_ENABLE(hfmpi2c);
+
+ hfmpi2c->State = HAL_FMPI2C_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hfmpi2c);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enable the FMPI2C1 fast mode plus driving capability.
+ * @param ConfigFastModePlus: selects the pin.
+ * This parameter can be one of the @ref FMPI2CEx_FastModePlus values
+ * @retval None
+ */
+void HAL_FMPI2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus)
+{
+ /* Check the parameter */
+ assert_param(IS_FMPI2C_FASTMODEPLUS(ConfigFastModePlus));
+
+ /* Enable SYSCFG clock */
+ __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+ /* Enable fast mode plus driving capability for selected pin */
+ SET_BIT(SYSCFG->CFGR, (uint32_t)ConfigFastModePlus);
+}
+
+/**
+ * @brief Disable the FMPI2C1 fast mode plus driving capability.
+ * @param ConfigFastModePlus: selects the pin.
+ * This parameter can be one of the @ref FMPI2CEx_FastModePlus values
+ * @retval None
+ */
+void HAL_FMPI2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus)
+{
+ /* Check the parameter */
+ assert_param(IS_FMPI2C_FASTMODEPLUS(ConfigFastModePlus));
+
+ /* Enable SYSCFG clock */
+ __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+ /* Disable fast mode plus driving capability for selected pin */
+ CLEAR_BIT(SYSCFG->CFGR, (uint32_t)ConfigFastModePlus);
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F446xx */
+#endif /* HAL_FMPI2C_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|