aboutsummaryrefslogtreecommitdiff
path: root/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr_ex.h
diff options
context:
space:
mode:
Diffstat (limited to 'Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr_ex.h')
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr_ex.h291
1 files changed, 291 insertions, 0 deletions
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr_ex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr_ex.h
new file mode 100644
index 0000000..ffc7c79
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr_ex.h
@@ -0,0 +1,291 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pwr_ex.h
+ * @author MCD Application Team
+ * @version V1.3.2
+ * @date 26-June-2015
+ * @brief Header file of PWR HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_PWR_EX_H
+#define __STM32F4xx_HAL_PWR_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PWREx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Constants PWREx Exported Constants
+ * @{
+ */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+
+/** @defgroup PWREx_Regulator_state_in_UnderDrive_mode PWREx Regulator state in UnderDrive mode
+ * @{
+ */
+#define PWR_MAINREGULATOR_UNDERDRIVE_ON PWR_CR_MRUDS
+#define PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON ((uint32_t)(PWR_CR_LPDS | PWR_CR_LPUDS))
+/**
+ * @}
+ */
+
+/** @defgroup PWREx_Over_Under_Drive_Flag PWREx Over Under Drive Flag
+ * @{
+ */
+#define PWR_FLAG_ODRDY PWR_CSR_ODRDY
+#define PWR_FLAG_ODSWRDY PWR_CSR_ODSWRDY
+#define PWR_FLAG_UDRDY PWR_CSR_UDSWRDY
+/**
+ * @}
+ */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+
+/** @defgroup PWR_Regulator_Voltage_Scale PWR Regulator Voltage Scale
+ * @{
+ */
+#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx)
+#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR_VOS /* Scale 1 mode(default value at reset): the maximum value of fHCLK = 168 MHz. */
+#define PWR_REGULATOR_VOLTAGE_SCALE2 ((uint32_t)0x00000000) /* Scale 2 mode: the maximum value of fHCLK = 144 MHz. */
+#else
+#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR_VOS /* Scale 1 mode(default value at reset): the maximum value of fHCLK is 168 MHz. It can be extended to
+ 180 MHz by activating the over-drive mode. */
+#define PWR_REGULATOR_VOLTAGE_SCALE2 PWR_CR_VOS_1 /* Scale 2 mode: the maximum value of fHCLK is 144 MHz. It can be extended to
+ 168 MHz by activating the over-drive mode. */
+#define PWR_REGULATOR_VOLTAGE_SCALE3 PWR_CR_VOS_0 /* Scale 3 mode: the maximum value of fHCLK is 120 MHz. */
+#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Constants PWREx Exported Constants
+ * @{
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+/** @brief Macros to enable or disable the Over drive mode.
+ * @note These macros can be used only for STM32F42xx/STM3243xx devices.
+ */
+#define __HAL_PWR_OVERDRIVE_ENABLE() (*(__IO uint32_t *) CR_ODEN_BB = ENABLE)
+#define __HAL_PWR_OVERDRIVE_DISABLE() (*(__IO uint32_t *) CR_ODEN_BB = DISABLE)
+
+/** @brief Macros to enable or disable the Over drive switching.
+ * @note These macros can be used only for STM32F42xx/STM3243xx devices.
+ */
+#define __HAL_PWR_OVERDRIVESWITCHING_ENABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = ENABLE)
+#define __HAL_PWR_OVERDRIVESWITCHING_DISABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = DISABLE)
+
+/** @brief Macros to enable or disable the Under drive mode.
+ * @note This mode is enabled only with STOP low power mode.
+ * In this mode, the 1.2V domain is preserved in reduced leakage mode. This
+ * mode is only available when the main regulator or the low power regulator
+ * is in low voltage mode.
+ * @note If the Under-drive mode was enabled, it is automatically disabled after
+ * exiting Stop mode.
+ * When the voltage regulator operates in Under-drive mode, an additional
+ * startup delay is induced when waking up from Stop mode.
+ */
+#define __HAL_PWR_UNDERDRIVE_ENABLE() (PWR->CR |= (uint32_t)PWR_CR_UDEN)
+#define __HAL_PWR_UNDERDRIVE_DISABLE() (PWR->CR &= (uint32_t)(~PWR_CR_UDEN))
+
+/** @brief Check PWR flag is set or not.
+ * @note These macros can be used only for STM32F42xx/STM3243xx devices.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_ODRDY: This flag indicates that the Over-drive mode
+ * is ready
+ * @arg PWR_FLAG_ODSWRDY: This flag indicates that the Over-drive mode
+ * switching is ready
+ * @arg PWR_FLAG_UDRDY: This flag indicates that the Under-drive mode
+ * is enabled in Stop mode
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_PWR_GET_ODRUDR_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the Under-Drive Ready flag.
+ * @note These macros can be used only for STM32F42xx/STM3243xx devices.
+ */
+#define __HAL_PWR_CLEAR_ODRUDR_FLAG() (PWR->CSR |= PWR_FLAG_UDRDY)
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PWREx_Exported_Functions PWREx Exported Functions
+ * @{
+ */
+
+/** @addtogroup PWREx_Exported_Functions_Group1
+ * @{
+ */
+void HAL_PWREx_EnableFlashPowerDown(void);
+void HAL_PWREx_DisableFlashPowerDown(void);
+HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void);
+HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void);
+uint32_t HAL_PWREx_GetVoltageRange(void);
+HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling);
+
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+void HAL_PWREx_EnableMainRegulatorLowVoltage(void);
+void HAL_PWREx_DisableMainRegulatorLowVoltage(void);
+void HAL_PWREx_EnableLowRegulatorLowVoltage(void);
+void HAL_PWREx_DisableLowRegulatorLowVoltage(void);
+#endif /* STM32F401xC || STM32F401xE || STM32F411xE */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void);
+HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void);
+HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup PWREx_Private_Constants PWREx Private Constants
+ * @{
+ */
+
+/** @defgroup PWREx_register_alias_address PWREx Register alias address
+ * @{
+ */
+/* ------------- PWR registers bit address in the alias region ---------------*/
+/* --- CR Register ---*/
+/* Alias word address of FPDS bit */
+#define FPDS_BIT_NUMBER POSITION_VAL(PWR_CR_FPDS)
+#define CR_FPDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (FPDS_BIT_NUMBER * 4))
+
+/* Alias word address of ODEN bit */
+#define ODEN_BIT_NUMBER POSITION_VAL(PWR_CR_ODEN)
+#define CR_ODEN_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (ODEN_BIT_NUMBER * 4))
+
+/* Alias word address of ODSWEN bit */
+#define ODSWEN_BIT_NUMBER POSITION_VAL(PWR_CR_ODSWEN)
+#define CR_ODSWEN_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (ODSWEN_BIT_NUMBER * 4))
+
+/* Alias word address of MRLVDS bit */
+#define MRLVDS_BIT_NUMBER POSITION_VAL(PWR_CR_MRLVDS)
+#define CR_MRLVDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (MRLVDS_BIT_NUMBER * 4))
+
+/* Alias word address of LPLVDS bit */
+#define LPLVDS_BIT_NUMBER POSITION_VAL(PWR_CR_LPLVDS)
+#define CR_LPLVDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (LPLVDS_BIT_NUMBER * 4))
+
+ /**
+ * @}
+ */
+
+/** @defgroup PWREx_CSR_register_alias PWRx CSR Register alias address
+ * @{
+ */
+/* --- CSR Register ---*/
+/* Alias word address of BRE bit */
+#define BRE_BIT_NUMBER POSITION_VAL(PWR_CSR_BRE)
+#define CSR_BRE_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32) + (BRE_BIT_NUMBER * 4))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup PWREx_Private_Macros PWREx Private Macros
+ * @{
+ */
+
+/** @defgroup PWREx_IS_PWR_Definitions PWREx Private macros to check input parameters
+ * @{
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+#define IS_PWR_REGULATOR_UNDERDRIVE(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_UNDERDRIVE_ON) || \
+ ((REGULATOR) == PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+
+#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx)
+#define IS_PWR_VOLTAGE_SCALING_RANGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \
+ ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2))
+#else
+#define IS_PWR_VOLTAGE_SCALING_RANGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \
+ ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2) || \
+ ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE3))
+#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_PWR_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/