1 files changed, 118 insertions, 0 deletions
diff --git a/rtl/src/ipcore/clkmgr_dcm/simulation/functional/wave.sv b/rtl/src/ipcore/clkmgr_dcm/simulation/functional/wave.sv
new file mode 100644
index 0000000..c3c3eef
--- /dev/null
+++ b/rtl/src/ipcore/clkmgr_dcm/simulation/functional/wave.sv
@@ -0,0 +1,118 @@
+# file: wave.sv
+# 
+# (c) Copyright 2008 - 2010 Xilinx, Inc. All rights reserved.
+# 
+# This file contains confidential and proprietary information
+# of Xilinx, Inc. and is protected under U.S. and
+# international copyright and other intellectual property
+# laws.
+# 
+# DISCLAIMER
+# This disclaimer is not a license and does not grant any
+# rights to the materials distributed herewith. Except as
+# otherwise provided in a valid license issued to you by
+# Xilinx, and to the maximum extent permitted by applicable
+# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+# (2) Xilinx shall not be liable (whether in contract or tort,
+# including negligence, or under any other theory of
+# liability) for any loss or damage of any kind or nature
+# related to, arising under or in connection with these
+# materials, including for any direct, or any indirect,
+# special, incidental, or consequential loss or damage
+# (including loss of data, profits, goodwill, or any type of
+# loss or damage suffered as a result of any action brought
+# by a third party) even if such damage or loss was
+# reasonably foreseeable or Xilinx had been advised of the
+# possibility of the same.
+# 
+# CRITICAL APPLICATIONS
+# Xilinx products are not designed or intended to be fail-
+# safe, or for use in any application requiring fail-safe
+# performance, such as life-support or safety devices or
+# systems, Class III medical devices, nuclear facilities,
+# applications related to the deployment of airbags, or any
+# other applications that could lead to death, personal
+# injury, or severe property or environmental damage
+# (individually and collectively, "Critical
+# Applications"). Customer assumes the sole risk and
+# liability of any use of Xilinx products in Critical
+# Applications, subject only to applicable laws and
+# regulations governing limitations on product liability.
+# 
+# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+# PART OF THIS FILE AT ALL TIMES.
+#
+# Get the windows set up
+#
+if {[catch {window new WatchList -name "Design Browser 1" -geometry 1054x819+536+322}] != ""} {
+    window geometry "Design Browser 1" 1054x819+536+322
+}
+window target "Design Browser 1" on
+browser using {Design Browser 1}
+browser set \
+    -scope nc::clkmgr_dcm_tb
+browser yview see nc::clkmgr_dcm_tb
+browser timecontrol set -lock 0
+
+if {[catch {window new WaveWindow -name "Waveform 1" -geometry 1010x600+0+541}] != ""} {
+    window geometry "Waveform 1" 1010x600+0+541
+}
+window target "Waveform 1" on
+waveform using {Waveform 1}
+waveform sidebar visibility partial
+waveform set \
+    -primarycursor TimeA \
+    -signalnames name \
+    -signalwidth 175 \
+    -units ns \
+    -valuewidth 75
+cursor set -using TimeA -time 0
+waveform baseline set -time 0
+waveform xview limits 0 20000n
+
+#
+# Define signal groups
+#
+catch {group new -name {Output clocks} -overlay 0}
+catch {group new -name {Status/control} -overlay 0}
+catch {group new -name {Counters} -overlay 0}
+
+set id [waveform add -signals [list {nc::clkmgr_dcm_tb.CLK_IN1}]]
+
+group using {Output clocks}
+group set -overlay 0
+group set -comment {}
+group clear 0 end
+
+group insert \
+    {clkmgr_dcm_tb.dut.clk} \
+
+group using {Counters}
+group set -overlay 0
+group set -comment {}
+group clear 0 end
+
+group insert \
+    {clkmgr_dcm_tb.dut.counter} \
+
+group using {Status/control}
+group set -overlay 0
+group set -comment {}
+group clear 0 end
+
+group insert \
+   {nc::clkmgr_dcm_tb.RESET}    {nc::clkmgr_dcm_tb.INPUT_CLK_STOPPED} 
+
+set id [waveform add -signals [list {nc::clkmgr_dcm_tb.COUNT} ]]
+
+set id [waveform add -signals [list {nc::clkmgr_dcm_tb.test_phase} ]]
+waveform format $id -radix %a
+
+set groupId [waveform add -groups {{Input clocks}}]
+set groupId [waveform add -groups {{Output clocks}}]
+set groupId [waveform add -groups {{Status/control}}]
+set groupId [waveform add -groups {{Counters}}]