//======================================================================
//
// sha256.v
// ------
// Top level wrapper for the SHA-256 hash function providing
// a simple memory like interface with 32 bit data access.
//
// Authors: Joachim Strömbergson, Paul Selkirk
// Copyright (c) 2014-2015, NORDUnet A/S All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
// - Redistributions of source code must retain the above copyright notice,
// this list of conditions and the following disclaimer.
//
// - Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
//
// - Neither the name of the NORDUnet nor the names of its contributors may
// be used to endorse or promote products derived from this software
// without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
//======================================================================
module sha256(
// Clock and reset.
input wire clk,
input wire reset_n,
// Control.
input wire cs,
input wire we,
// Data ports.
input wire [7 : 0] address,
input wire [31 : 0] write_data,
output wire [31 : 0] read_data
);
//----------------------------------------------------------------
// Internal constant and parameter definitions.
//----------------------------------------------------------------
parameter ADDR_NAME0 = 8'h00;
parameter ADDR_NAME1 = 8'h01;
parameter ADDR_VERSION = 8'h02;
parameter ADDR_CTRL = 8'h08;
parameter CTRL_INIT_BIT = 0;
parameter CTRL_NEXT_BIT = 1;
parameter ADDR_STATUS = 8'h09;
parameter STATUS_READY_BIT = 0;
parameter STATUS_VALID_BIT = 1;
parameter ADDR_BLOCK = 8'h10;
parameter ADDR_DIGEST = 8'h20;
parameter CORE_NAME0 = 32'h73686132; // "sha2"
parameter CORE_NAME1 = 32'h2d323536; // "-256"
parameter CORE_VERSION = 32'h302e3830; // "0.80"
parameter BLOCK_BITS = 512;
parameter DIGEST_BITS = 256;
parameter BLOCK_WORDS = BLOCK_BITS / 32;
parameter DIGEST_WORDS = DIGEST_BITS / 32;
//----------------------------------------------------------------
// Registers.
//----------------------------------------------------------------
reg [0 : BLOCK_BITS - 1] block_reg;
reg [0 : DIGEST_BITS - 1] digest_reg;
reg init_reg;
reg next_reg;
reg [31 : 0] tmp_read_data;
reg [31 : 0] tmp_read_data_reg;
//----------------------------------------------------------------
// Wires.
//----------------------------------------------------------------
wire core_init;
wire core_next;
wire core_ready;
wire [0 : BLOCK_BITS - 1] core_block;
wire [0 : DIGEST_BITS - 1] core_digest;
wire core_digest_valid;
wire [31 : 0] core_name0 = CORE_NAME0;
wire [31 : 0] core_name1 = CORE_NAME1;
wire [31 : 0] core_version = CORE_VERSION;
wire [31 : 0] core_ctrl;
wire [31 : 0] core_status;
//----------------------------------------------------------------
// Concurrent connectivity for ports etc.
//----------------------------------------------------------------
assign core_init = init_reg;
assign core_next = next_reg;
assign core_ctrl = { 30'b0, next_reg, init_reg };
assign core_status = { 30'b0, core_digest_valid, core_ready };
assign core_block = block_reg;
assign read_data = tmp_read_data_reg;
//----------------------------------------------------------------
// core instantiation.
//----------------------------------------------------------------
sha256_core core(
.clk(clk),
.reset_n(reset_n),
.init(core_init),
.next(core_next),
.block(core_block),
.ready(core_ready),
.digest(core_digest),
.digest_valid(core_digest_valid)
);
//----------------------------------------------------------------
// latch in digest when ready
//----------------------------------------------------------------
always @(posedge clk)
begin
if (core_digest_valid)
digest_reg <= core_digest;
end
//----------------------------------------------------------------
// storage registers for mapping memory to core interface
//----------------------------------------------------------------
always @(posedge clk)
begin
init_reg <= 0;
next_reg <= 0;
if (cs && we)
begin
// write operations
if ((address >= ADDR_BLOCK) &&
(address < ADDR_BLOCK + BLOCK_WORDS))
block_reg[((address - ADDR_BLOCK) * 32)+:32] <= write_data;
else if (address == ADDR_CTRL)
begin
init_reg <= write_data[CTRL_INIT_BIT];
next_reg <= write_data[CTRL_NEXT_BIT];
end
end
end
always @*
begin
tmp_read_data = 32'h00000000;
if (cs && !we)
begin
// read operations
if ((address >= ADDR_BLOCK) &&
(address < ADDR_BLOCK + BLOCK_WORDS))
tmp_read_data = block_reg[((address - ADDR_BLOCK) * 32)+:32];
else if ((address >= ADDR_DIGEST) &&
(address < ADDR_DIGEST + DIGEST_WORDS))
tmp_read_data = digest_reg[((address - ADDR_DIGEST) * 32)+:32];
else
case (address)
ADDR_NAME0:
tmp_read_data = core_name0;
ADDR_NAME1:
tmp_read_data = core_name1;
ADDR_VERSION:
tmp_read_data = core_version;
ADDR_CTRL:
tmp_read_data = core_ctrl;
ADDR_STATUS:
tmp_read_data = core_status;
endcase
end
end
always @(posedge clk)
begin
tmp_read_data_reg <= tmp_read_data;
end
endmodule // sha256
