1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
|
/*
* Test code for the RTC.
*
* Dumps the SRAM and EEPROM on startup, then enables the oscillator.
* After that, the clock registers are read once a second - the first byte
* is seconds (and some control bits, so dont expect 0..59).
*
*/
#include <string.h>
#include "stm-init.h"
#include "stm-led.h"
#include "stm-uart.h"
#include "stm-rtc.h"
#define DELAY() HAL_Delay(1000)
uint8_t buf[1024];
uint32_t i;
uint32_t device_ready(uint16_t i2c_addr)
{
uart_send_string("Checking readiness of 0x");
uart_send_hex(i2c_addr, 4);
uart_send_string("...");
if (rtc_device_ready(i2c_addr) == HAL_OK) {
uart_send_string("OK\r\n");
return 1;
}
uart_send_string("Not ready (0x");
uart_send_hex(i, 4);
uart_send_string(")\r\n");
return 0;
}
void send_byte(const uint16_t i2c_addr, const uint8_t value)
{
uint8_t ch = value;
uart_send_string("Sending ");
uart_send_hex(ch, 2);
uart_send_string(" to 0x");
uart_send_hex(i2c_addr, 4);
uart_send_string("...");
if (rtc_send_byte(i2c_addr, ch, 1000) != HAL_OK) {
uart_send_string("Timeout\r\n");
Error_Handler();
}
uart_send_string("OK\r\n");
}
void read_bytes (uint8_t *buf, const uint16_t i2c_addr, const uint8_t len)
{
uart_send_string("Reading ");
uart_send_integer(len, 1);
uart_send_string(" bytes from 0x");
uart_send_hex(i2c_addr, 4);
uart_send_string("...");
if (rtc_read_bytes(i2c_addr, buf, len, 1000) != HAL_OK) {
uart_send_string("Timeout\r\n");
Error_Handler();
}
uart_send_string("OK\r\n");
}
void request_data(uint8_t *buf, const uint16_t i2c_addr, const uint8_t offset, const uint8_t bytes)
{
send_byte(i2c_addr, offset);
read_bytes(buf, i2c_addr, bytes);
}
void print_time()
{
request_data(buf, RTC_RTC_ADDR, RTC_TIME_OFFSET, RTC_TIME_BYTES);
for (i = 0; i < RTC_TIME_BYTES; i++) {
uart_send_hex(buf[i], 2);
uart_send_string(" ");
}
}
void dump_sram()
{
request_data(buf, RTC_RTC_ADDR, 0x0, RTC_SRAM_TOTAL_BYTES);
uart_send_string("SRAM contents:\r\n");
uart_send_hexdump(buf, 0, RTC_SRAM_TOTAL_BYTES);
uart_send_string("\r\n");
}
void dump_eeprom()
{
request_data(buf, RTC_EEPROM_ADDR, 0x0, RTC_EEPROM_TOTAL_BYTES);
uart_send_string("EEPROM contents:\r\n");
uart_send_hexdump(buf, 0, RTC_EEPROM_TOTAL_BYTES);
uart_send_string("\r\n");
request_data(buf, RTC_EEPROM_ADDR, RTC_EEPROM_EUI48_OFFSET, RTC_EEPROM_EUI48_BYTES);
uart_send_string("EEPROM EUI-48:\r\n");
uart_send_hexdump(buf, RTC_EEPROM_EUI48_OFFSET, RTC_EEPROM_EUI48_BYTES);
uart_send_string("\r\n");
}
void enable_oscillator()
{
uart_send_string("Enabling oscillator...\r\n");
if (rtc_enable_oscillator() != HAL_OK) {
uart_send_string("Timeout\r\n");
Error_Handler();
}
uart_send_string("OK\r\n");
}
int
main()
{
stm_init();
uart_send_string("\r\n\r\n*** Init done\r\n");
dump_sram();
dump_eeprom();
enable_oscillator();
while (1) {
memset(buf, 0, sizeof(buf));
if (! device_ready(RTC_RTC_ADDR)) {
goto fail;
}
print_time(buf);
uart_send_string("\r\n\r\n");
HAL_GPIO_TogglePin(LED_PORT, LED_GREEN);
DELAY();
continue;
fail:
HAL_GPIO_TogglePin(LED_PORT, LED_RED);
DELAY();
}
}
|
