aboutsummaryrefslogtreecommitdiff
path: root/stm-fpgacfg.c
diff options
context:
space:
mode:
Diffstat (limited to 'stm-fpgacfg.c')
-rw-r--r--stm-fpgacfg.c279
1 files changed, 279 insertions, 0 deletions
diff --git a/stm-fpgacfg.c b/stm-fpgacfg.c
new file mode 100644
index 0000000..0026b9e
--- /dev/null
+++ b/stm-fpgacfg.c
@@ -0,0 +1,279 @@
+/*
+ * stm-fpgacfg.c
+ * ----------
+ * Functions for accessing the FPGA config memory.
+ *
+ * Copyright (c) 2016, NORDUnet A/S All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * - Neither the name of the NORDUnet nor the names of its contributors may
+ * be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "stm32f4xx_hal.h"
+#include "stm-fpgacfg.h"
+
+SPI_HandleTypeDef hspi_fpgacfg;
+
+int _n25q128_get_wel_flag(void);
+
+
+int n25q128_check_id()
+{
+ // tx, rx buffers
+ uint8_t spi_tx[4];
+ uint8_t spi_rx[4];
+
+ // result
+ HAL_StatusTypeDef ok;
+
+ // send READ ID command
+ spi_tx[0] = N25Q128_COMMAND_READ_ID;
+
+ // select, send command & read response, deselect
+ _n25q128_select();
+ ok = HAL_SPI_TransmitReceive(N25Q128_SPI_HANDLE, spi_tx, spi_rx, 4, N25Q128_SPI_TIMEOUT);
+ HAL_Delay(1);
+ _n25q128_deselect();
+
+ // check
+ if (ok != HAL_OK) return 0;
+
+ // parse response (note, that the very first byte was received during the
+ // transfer of the command byte, so it contains garbage and should
+ // be ignored here)
+ if (spi_rx[1] != N25Q128_ID_MANUFACTURER) return 0;
+ if (spi_rx[2] != N25Q128_ID_DEVICE_TYPE) return 0;
+ if (spi_rx[3] != N25Q128_ID_DEVICE_CAPACITY) return 0;
+
+ // done
+ return 1;
+}
+
+
+int n25q128_read_page(uint32_t page_offset, uint8_t *page_buffer)
+{
+ // tx buffer
+ uint8_t spi_tx[4];
+
+ // result
+ HAL_StatusTypeDef ok;
+
+ // check offset
+ if (page_offset >= N25Q128_NUM_PAGES) return 0;
+
+ // calculate byte address
+ page_offset *= N25Q128_PAGE_SIZE;
+
+ // prepare READ command
+ spi_tx[0] = N25Q128_COMMAND_READ_PAGE;
+ spi_tx[1] = (uint8_t)(page_offset >> 16);
+ spi_tx[2] = (uint8_t)(page_offset >> 8);
+ spi_tx[3] = (uint8_t)(page_offset >> 0);
+
+ // activate, send command
+ _n25q128_select();
+ ok = HAL_SPI_Transmit(N25Q128_SPI_HANDLE, spi_tx, 4, N25Q128_SPI_TIMEOUT);
+ HAL_Delay(1);
+
+ // check
+ if (ok != HAL_OK) {
+ _n25q128_deselect();
+ return 0;
+ }
+
+ // read response, deselect
+ ok = HAL_SPI_Receive(N25Q128_SPI_HANDLE, page_buffer, N25Q128_PAGE_SIZE, N25Q128_SPI_TIMEOUT);
+ HAL_Delay(1);
+ _n25q128_deselect();
+
+ // check
+ if (ok != HAL_OK) return 0;
+
+ // done
+ return 1;
+}
+
+
+int n25q128_write_page(uint32_t page_offset, uint8_t *page_buffer)
+{
+ // tx buffer
+ uint8_t spi_tx[4];
+
+ // result
+ HAL_StatusTypeDef ok;
+
+ // check offset
+ if (page_offset >= N25Q128_NUM_PAGES) return 0;
+
+ // enable writing
+ spi_tx[0] = N25Q128_COMMAND_WRITE_ENABLE;
+
+ // activate, send command, deselect
+ _n25q128_select();
+ ok = HAL_SPI_Transmit(N25Q128_SPI_HANDLE, spi_tx, 1, N25Q128_SPI_TIMEOUT);
+ HAL_Delay(1);
+ _n25q128_deselect();
+
+ // check
+ if (ok != HAL_OK) return 0;
+
+ // make sure, that write enable did the job
+ int wel = _n25q128_get_wel_flag();
+ if (wel != 1) return 0;
+
+ // calculate byte address
+ page_offset *= N25Q128_PAGE_SIZE;
+
+ // prepare PROGRAM PAGE command
+ spi_tx[0] = N25Q128_COMMAND_PAGE_PROGRAM;
+ spi_tx[1] = (uint8_t)(page_offset >> 16);
+ spi_tx[2] = (uint8_t)(page_offset >> 8);
+ spi_tx[3] = (uint8_t)(page_offset >> 0);
+
+ // activate, send command
+ _n25q128_select();
+ ok = HAL_SPI_Transmit(N25Q128_SPI_HANDLE, spi_tx, 4, N25Q128_SPI_TIMEOUT);
+ HAL_Delay(1);
+
+ // check
+ if (ok != HAL_OK) {
+ _n25q128_deselect();
+ return 0;
+ }
+
+ // send data, deselect
+ ok = HAL_SPI_Transmit(N25Q128_SPI_HANDLE, page_buffer, N25Q128_PAGE_SIZE, N25Q128_SPI_TIMEOUT);
+ HAL_Delay(1);
+ _n25q128_deselect();
+
+ // check
+ if (ok != HAL_OK) return 0;
+
+ // done
+ return 1;
+}
+
+
+int n25q128_get_wip_flag(void)
+{
+ // tx, rx buffers
+ uint8_t spi_tx[2];
+ uint8_t spi_rx[2];
+
+ // result
+ HAL_StatusTypeDef ok;
+
+ // send READ STATUS command
+ spi_tx[0] = N25Q128_COMMAND_READ_STATUS;
+
+ // send command, read response, deselect
+ _n25q128_select();
+ ok = HAL_SPI_TransmitReceive(N25Q128_SPI_HANDLE, spi_tx, spi_rx, 2, N25Q128_SPI_TIMEOUT);
+ HAL_Delay(1);
+ _n25q128_deselect();
+
+ // check
+ if (ok != HAL_OK) return -1;
+
+ // done
+ return (spi_rx[1] & 1);
+}
+
+
+int n25q128_erase_sector(uint32_t sector_offset)
+{
+ // tx buffer
+ uint8_t spi_tx[4];
+
+ // result
+ HAL_StatusTypeDef ok;
+
+ // check offset
+ if (sector_offset >= N25Q128_NUM_SECTORS) return 0;
+
+ // enable writing
+ spi_tx[0] = N25Q128_COMMAND_WRITE_ENABLE;
+
+ // select, send command, deselect
+ _n25q128_select();
+ ok = HAL_SPI_Transmit(N25Q128_SPI_HANDLE, spi_tx, 1, N25Q128_SPI_TIMEOUT);
+ HAL_Delay(1);
+ _n25q128_deselect();
+
+ // check
+ if (ok != HAL_OK) return 0;
+
+ // make sure, that write enable did the job
+ int wel = _n25q128_get_wel_flag();
+ if (wel != 1) return 0;
+
+ // calculate byte address
+ sector_offset *= N25Q128_SECTOR_SIZE;
+
+ // send ERASE SUBSECTOR command
+ spi_tx[0] = N25Q128_COMMAND_ERASE_SECTOR;
+ spi_tx[1] = (uint8_t)(sector_offset >> 16);
+ spi_tx[2] = (uint8_t)(sector_offset >> 8);
+ spi_tx[3] = (uint8_t)(sector_offset >> 0);
+
+ // activate, send command, deselect
+ _n25q128_select();
+ ok = HAL_SPI_Transmit(N25Q128_SPI_HANDLE, spi_tx, 4, N25Q128_SPI_TIMEOUT);
+ HAL_Delay(1);
+ _n25q128_deselect();
+
+ // check
+ if (ok != HAL_OK) return 0;
+
+ // done
+ return 1;
+}
+
+
+int _n25q128_get_wel_flag(void)
+{
+ // tx, rx buffers
+ uint8_t spi_tx[2];
+ uint8_t spi_rx[2];
+
+ // result
+ HAL_StatusTypeDef ok;
+
+ // send READ STATUS command
+ spi_tx[0] = N25Q128_COMMAND_READ_STATUS;
+
+ // send command, read response, deselect
+ _n25q128_select();
+ ok = HAL_SPI_TransmitReceive(N25Q128_SPI_HANDLE, spi_tx, spi_rx, 2, N25Q128_SPI_TIMEOUT);
+ HAL_Delay(1);
+ _n25q128_deselect();
+
+ // check
+ if (ok != HAL_OK) return -1;
+
+ // done
+ return ((spi_rx[1] >> 1) & 1);
+}