Based on user/ft/stm32-dev-bridge, without the project-specific build

directories (and duplicated code).

1 files changed, 788 insertions, 0 deletions

diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_qspi.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_qspi.h
new file mode 100644
index 0000000..b444a46
--- /dev/null
+++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_qspi.h
@@ -0,0 +1,788 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_qspi.h
+  * @author  MCD Application Team
+  * @version V1.3.2
+  * @date    26-June-2015
+  * @brief   Header file of QSPI HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_QSPI_H
+#define __STM32F4xx_HAL_QSPI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F446xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup QSPI
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup QSPI_Exported_Types QSPI Exported Types
+  * @{
+  */
+
+/**
+  * @brief  QSPI Init structure definition
+  */
+
+typedef struct
+{
+  uint32_t ClockPrescaler;     /* Specifies the prescaler factor for generating clock based on the AHB clock.
+                                  This parameter can be a number between 0 and 255 */
+
+  uint32_t FifoThreshold;      /* Specifies the threshold number of bytes in the FIFO (used only in indirect mode)
+                                  This parameter can be a value between 1 and 32 */
+
+  uint32_t SampleShifting;     /* Specifies the Sample Shift. The data is sampled 1/2 clock cycle delay later to
+                                  take in account external signal delays. (It should be QSPI_SAMPLE_SHIFTING_NONE in DDR mode)
+                                  This parameter can be a value of @ref QSPI_SampleShifting */
+
+  uint32_t FlashSize;          /* Specifies the Flash Size. FlashSize+1 is effectively the number of address bits
+                                  required to address the flash memory. The flash capacity can be up to 4GB
+                                  (addressed using 32 bits) in indirect mode, but the addressable space in
+                                  memory-mapped mode is limited to 256MB
+                                  This parameter can be a number between 0 and 31 */
+
+  uint32_t ChipSelectHighTime; /* Specifies the Chip Select High Time. ChipSelectHighTime+1 defines the minimum number
+                                  of clock cycles which the chip select must remain high between commands.
+                                  This parameter can be a value of @ref QSPI_ChipSelectHighTime */
+
+  uint32_t ClockMode;          /* Specifies the Clock Mode. It indicates the level that clock takes between commands.
+                                  This parameter can be a value of @ref QSPI_ClockMode */
+
+  uint32_t FlashID;            /* Specifies the Flash which will be used,
+                                  This parameter can be a value of @ref QSPI_Flash_Select */
+
+  uint32_t DualFlash;          /* Specifies the Dual Flash Mode State
+                                  This parameter can be a value of @ref QSPI_DualFlash_Mode */
+}QSPI_InitTypeDef;
+
+/**
+  * @brief HAL QSPI State structures definition
+  */
+typedef enum
+{
+  HAL_QSPI_STATE_RESET             = 0x00,    /*!< Peripheral not initialized                            */
+  HAL_QSPI_STATE_READY             = 0x01,    /*!< Peripheral initialized and ready for use              */
+  HAL_QSPI_STATE_BUSY              = 0x02,    /*!< Peripheral in indirect mode and busy                  */
+  HAL_QSPI_STATE_BUSY_INDIRECT_TX  = 0x12,    /*!< Peripheral in indirect mode with transmission ongoing */
+  HAL_QSPI_STATE_BUSY_INDIRECT_RX  = 0x22,    /*!< Peripheral in indirect mode with reception ongoing    */
+  HAL_QSPI_STATE_BUSY_AUTO_POLLING = 0x42,    /*!< Peripheral in auto polling mode ongoing               */
+  HAL_QSPI_STATE_BUSY_MEM_MAPPED   = 0x82,    /*!< Peripheral in memory mapped mode ongoing              */
+  HAL_QSPI_STATE_ERROR             = 0x04     /*!< Peripheral in error                                   */
+}HAL_QSPI_StateTypeDef;
+
+/**
+  * @brief  QSPI Handle Structure definition
+  */
+typedef struct
+{
+  QUADSPI_TypeDef            *Instance;        /* QSPI registers base address        */
+  QSPI_InitTypeDef           Init;             /* QSPI communication parameters      */
+  uint8_t                    *pTxBuffPtr;      /* Pointer to QSPI Tx transfer Buffer */
+  __IO uint16_t              TxXferSize;       /* QSPI Tx Transfer size              */
+  __IO uint16_t              TxXferCount;      /* QSPI Tx Transfer Counter           */
+  uint8_t                    *pRxBuffPtr;      /* Pointer to QSPI Rx transfer Buffer */
+  __IO uint16_t              RxXferSize;       /* QSPI Rx Transfer size              */
+  __IO uint16_t              RxXferCount;      /* QSPI Rx Transfer Counter           */
+  DMA_HandleTypeDef          *hdma;            /* QSPI Rx/Tx DMA Handle parameters   */
+  __IO HAL_LockTypeDef       Lock;             /* Locking object                     */
+  __IO HAL_QSPI_StateTypeDef State;            /* QSPI communication state           */
+  __IO uint32_t              ErrorCode;        /* QSPI Error code                    */
+  uint32_t                   Timeout;          /* Timeout for the QSPI memory access */
+}QSPI_HandleTypeDef;
+
+/**
+  * @brief  QSPI Command structure definition
+  */
+typedef struct
+{
+  uint32_t Instruction;        /* Specifies the Instruction to be sent
+                                  This parameter can be a value (8-bit) between 0x00 and 0xFF */
+  uint32_t Address;            /* Specifies the Address to be sent (Size from 1 to 4 bytes according AddressSize)
+                                  This parameter can be a value (32-bits) between 0x0 and 0xFFFFFFFF */
+  uint32_t AlternateBytes;     /* Specifies the Alternate Bytes to be sent (Size from 1 to 4 bytes according AlternateBytesSize)
+                                  This parameter can be a value (32-bits) between 0x0 and 0xFFFFFFFF */
+  uint32_t AddressSize;        /* Specifies the Address Size
+                                  This parameter can be a value of @ref QSPI_AddressSize */
+  uint32_t AlternateBytesSize; /* Specifies the Alternate Bytes Size
+                                  This parameter can be a value of @ref QSPI_AlternateBytesSize */
+  uint32_t DummyCycles;        /* Specifies the Number of Dummy Cycles.
+                                  This parameter can be a number between 0 and 31 */
+  uint32_t InstructionMode;    /* Specifies the Instruction Mode
+                                  This parameter can be a value of @ref QSPI_InstructionMode */
+  uint32_t AddressMode;        /* Specifies the Address Mode
+                                  This parameter can be a value of @ref QSPI_AddressMode */
+  uint32_t AlternateByteMode;  /* Specifies the Alternate Bytes Mode
+                                  This parameter can be a value of @ref QSPI_AlternateBytesMode */
+  uint32_t DataMode;           /* Specifies the Data Mode (used for dummy cycles and data phases)
+                                  This parameter can be a value of @ref QSPI_DataMode */
+  uint32_t NbData;             /* Specifies the number of data to transfer.
+                                  This parameter can be any value between 0 and 0xFFFFFFFF (0 means undefined length
+                                  until end of memory)*/
+  uint32_t DdrMode;            /* Specifies the double data rate mode for address, alternate byte and data phase
+                                  This parameter can be a value of @ref QSPI_DdrMode */
+  uint32_t DdrHoldHalfCycle;   /* Specifies the DDR hold half cycle. It delays the data output by one half of
+                                  system clock in DDR mode.
+                                  This parameter can be a value of @ref QSPI_DdrHoldHalfCycle */
+  uint32_t SIOOMode;          /* Specifies the send instruction only once mode
+                                  This parameter can be a value of @ref QSPI_SIOOMode */
+}QSPI_CommandTypeDef;
+
+/**
+  * @brief  QSPI Auto Polling mode configuration structure definition
+  */
+typedef struct
+{
+  uint32_t Match;              /* Specifies the value to be compared with the masked status register to get a match.
+                                  This parameter can be any value between 0 and 0xFFFFFFFF */
+  uint32_t Mask;               /* Specifies the mask to be applied to the status bytes received.
+                                  This parameter can be any value between 0 and 0xFFFFFFFF */
+  uint32_t Interval;           /* Specifies the number of clock cycles between two read during automatic polling phases.
+                                  This parameter can be any value between 0 and 0xFFFF */
+  uint32_t StatusBytesSize;    /* Specifies the size of the status bytes received.
+                                  This parameter can be any value between 1 and 4 */
+  uint32_t MatchMode;          /* Specifies the method used for determining a match.
+                                  This parameter can be a value of @ref QSPI_MatchMode */
+  uint32_t AutomaticStop;      /* Specifies if automatic polling is stopped after a match.
+                                  This parameter can be a value of @ref QSPI_AutomaticStop */
+}QSPI_AutoPollingTypeDef;
+
+/**
+  * @brief  QSPI Memory Mapped mode configuration structure definition
+  */
+typedef struct
+{
+  uint32_t TimeOutPeriod;      /* Specifies the number of clock to wait when the FIFO is full before to release the chip select.
+                                  This parameter can be any value between 0 and 0xFFFF */
+  uint32_t TimeOutActivation;  /* Specifies if the time out counter is enabled to release the chip select.
+                                  This parameter can be a value of @ref QSPI_TimeOutActivation */
+}QSPI_MemoryMappedTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup QSPI_Exported_Constants QSPI Exported Constants
+  * @{
+  */
+/** @defgroup QSPI_ErrorCode QSPI Error Code
+  * @{
+  */
+#define HAL_QSPI_ERROR_NONE            ((uint32_t)0x00000000) /*!< No error           */
+#define HAL_QSPI_ERROR_TIMEOUT         ((uint32_t)0x00000001) /*!< Timeout error      */
+#define HAL_QSPI_ERROR_TRANSFER        ((uint32_t)0x00000002) /*!< Transfer error     */
+#define HAL_QSPI_ERROR_DMA             ((uint32_t)0x00000004) /*!< DMA transfer error */
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_SampleShifting QSPI Sample Shifting
+  * @{
+  */
+#define QSPI_SAMPLE_SHIFTING_NONE           ((uint32_t)0x00000000)        /*!<No clock cycle shift to sample data*/
+#define QSPI_SAMPLE_SHIFTING_HALFCYCLE      ((uint32_t)QUADSPI_CR_SSHIFT) /*!<1/2 clock cycle shift to sample data*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_ChipSelectHighTime QSPI Chip Select High Time
+  * @{
+  */
+#define QSPI_CS_HIGH_TIME_1_CYCLE           ((uint32_t)0x00000000)                              /*!<nCS stay high for at least 1 clock cycle between commands*/
+#define QSPI_CS_HIGH_TIME_2_CYCLE           ((uint32_t)QUADSPI_DCR_CSHT_0)                      /*!<nCS stay high for at least 2 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_3_CYCLE           ((uint32_t)QUADSPI_DCR_CSHT_1)                      /*!<nCS stay high for at least 3 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_4_CYCLE           ((uint32_t)QUADSPI_DCR_CSHT_0 | QUADSPI_DCR_CSHT_1) /*!<nCS stay high for at least 4 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_5_CYCLE           ((uint32_t)QUADSPI_DCR_CSHT_2)                      /*!<nCS stay high for at least 5 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_6_CYCLE           ((uint32_t)QUADSPI_DCR_CSHT_2 | QUADSPI_DCR_CSHT_0) /*!<nCS stay high for at least 6 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_7_CYCLE           ((uint32_t)QUADSPI_DCR_CSHT_2 | QUADSPI_DCR_CSHT_1) /*!<nCS stay high for at least 7 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_8_CYCLE           ((uint32_t)QUADSPI_DCR_CSHT)                        /*!<nCS stay high for at least 8 clock cycles between commands*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_ClockMode QSPI Clock Mode
+  * @{
+  */
+#define QSPI_CLOCK_MODE_0                   ((uint32_t)0x00000000)         /*!<Clk stays low while nCS is released*/
+#define QSPI_CLOCK_MODE_3                   ((uint32_t)QUADSPI_DCR_CKMODE) /*!<Clk goes high while nCS is released*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_Flash_Select QSPI Flash Select
+  * @{
+  */
+#define QSPI_FLASH_ID_1           ((uint32_t)0x00000000)
+#define QSPI_FLASH_ID_2           ((uint32_t)QUADSPI_CR_FSEL)
+/**
+  * @}
+  */
+
+  /** @defgroup QSPI_DualFlash_Mode  QSPI Dual Flash Mode
+  * @{
+  */
+#define QSPI_DUALFLASH_ENABLE            ((uint32_t)QUADSPI_CR_DFM)
+#define QSPI_DUALFLASH_DISABLE           ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_AddressSize QSPI Address Size
+  * @{
+  */
+#define QSPI_ADDRESS_8_BITS            ((uint32_t)0x00000000)           /*!<8-bit address*/
+#define QSPI_ADDRESS_16_BITS           ((uint32_t)QUADSPI_CCR_ADSIZE_0) /*!<16-bit address*/
+#define QSPI_ADDRESS_24_BITS           ((uint32_t)QUADSPI_CCR_ADSIZE_1) /*!<24-bit address*/
+#define QSPI_ADDRESS_32_BITS           ((uint32_t)QUADSPI_CCR_ADSIZE)   /*!<32-bit address*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_AlternateBytesSize QSPI Alternate Bytes Size
+  * @{
+  */
+#define QSPI_ALTERNATE_BYTES_8_BITS    ((uint32_t)0x00000000)           /*!<8-bit alternate bytes*/
+#define QSPI_ALTERNATE_BYTES_16_BITS   ((uint32_t)QUADSPI_CCR_ABSIZE_0) /*!<16-bit alternate bytes*/
+#define QSPI_ALTERNATE_BYTES_24_BITS   ((uint32_t)QUADSPI_CCR_ABSIZE_1) /*!<24-bit alternate bytes*/
+#define QSPI_ALTERNATE_BYTES_32_BITS   ((uint32_t)QUADSPI_CCR_ABSIZE)   /*!<32-bit alternate bytes*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_InstructionMode QSPI Instruction Mode
+* @{
+*/
+#define QSPI_INSTRUCTION_NONE          ((uint32_t)0x00000000)          /*!<No instruction*/
+#define QSPI_INSTRUCTION_1_LINE        ((uint32_t)QUADSPI_CCR_IMODE_0) /*!<Instruction on a single line*/
+#define QSPI_INSTRUCTION_2_LINES       ((uint32_t)QUADSPI_CCR_IMODE_1) /*!<Instruction on two lines*/
+#define QSPI_INSTRUCTION_4_LINES       ((uint32_t)QUADSPI_CCR_IMODE)   /*!<Instruction on four lines*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_AddressMode QSPI Address Mode
+* @{
+*/
+#define QSPI_ADDRESS_NONE              ((uint32_t)0x00000000)           /*!<No address*/
+#define QSPI_ADDRESS_1_LINE            ((uint32_t)QUADSPI_CCR_ADMODE_0) /*!<Address on a single line*/
+#define QSPI_ADDRESS_2_LINES           ((uint32_t)QUADSPI_CCR_ADMODE_1) /*!<Address on two lines*/
+#define QSPI_ADDRESS_4_LINES           ((uint32_t)QUADSPI_CCR_ADMODE)   /*!<Address on four lines*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_AlternateBytesMode  QSPI Alternate Bytes Mode
+* @{
+*/
+#define QSPI_ALTERNATE_BYTES_NONE      ((uint32_t)0x00000000)           /*!<No alternate bytes*/
+#define QSPI_ALTERNATE_BYTES_1_LINE    ((uint32_t)QUADSPI_CCR_ABMODE_0) /*!<Alternate bytes on a single line*/
+#define QSPI_ALTERNATE_BYTES_2_LINES   ((uint32_t)QUADSPI_CCR_ABMODE_1) /*!<Alternate bytes on two lines*/
+#define QSPI_ALTERNATE_BYTES_4_LINES   ((uint32_t)QUADSPI_CCR_ABMODE)   /*!<Alternate bytes on four lines*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_DataMode QSPI Data Mode
+  * @{
+  */
+#define QSPI_DATA_NONE                 ((uint32_t)0X00000000)           /*!<No data*/
+#define QSPI_DATA_1_LINE               ((uint32_t)QUADSPI_CCR_DMODE_0) /*!<Data on a single line*/
+#define QSPI_DATA_2_LINES              ((uint32_t)QUADSPI_CCR_DMODE_1) /*!<Data on two lines*/
+#define QSPI_DATA_4_LINES              ((uint32_t)QUADSPI_CCR_DMODE)   /*!<Data on four lines*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_DdrMode QSPI Ddr Mode
+  * @{
+  */
+#define QSPI_DDR_MODE_DISABLE              ((uint32_t)0x00000000)       /*!<Double data rate mode disabled*/
+#define QSPI_DDR_MODE_ENABLE               ((uint32_t)QUADSPI_CCR_DDRM) /*!<Double data rate mode enabled*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_DdrHoldHalfCycle QSPI Ddr HoldHalfCycle
+  * @{
+  */
+#define QSPI_DDR_HHC_ANALOG_DELAY           ((uint32_t)0x00000000)       /*!<Delay the data output using analog delay in DDR mode*/
+#define QSPI_DDR_HHC_HALF_CLK_DELAY         ((uint32_t)QUADSPI_CCR_DHHC) /*!<Delay the data output by 1/2 clock cycle in DDR mode*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_SIOOMode QSPI SIOO Mode
+  * @{
+  */
+#define QSPI_SIOO_INST_EVERY_CMD       ((uint32_t)0x00000000)       /*!<Send instruction on every transaction*/
+#define QSPI_SIOO_INST_ONLY_FIRST_CMD  ((uint32_t)QUADSPI_CCR_SIOO) /*!<Send instruction only for the first command*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_MatchMode QSPI Match Mode
+  * @{
+  */
+#define QSPI_MATCH_MODE_AND                 ((uint32_t)0x00000000)     /*!<AND match mode between unmasked bits*/
+#define QSPI_MATCH_MODE_OR                  ((uint32_t)QUADSPI_CR_PMM) /*!<OR match mode between unmasked bits*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_AutomaticStop QSPI Automatic Stop
+  * @{
+  */
+#define QSPI_AUTOMATIC_STOP_DISABLE        ((uint32_t)0x00000000)      /*!<AutoPolling stops only with abort or QSPI disabling*/
+#define QSPI_AUTOMATIC_STOP_ENABLE         ((uint32_t)QUADSPI_CR_APMS) /*!<AutoPolling stops as soon as there is a match*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_TimeOutActivation QSPI TimeOut Activation
+  * @{
+  */
+#define QSPI_TIMEOUT_COUNTER_DISABLE       ((uint32_t)0x00000000)      /*!<Timeout counter disabled, nCS remains active*/
+#define QSPI_TIMEOUT_COUNTER_ENABLE        ((uint32_t)QUADSPI_CR_TCEN) /*!<Timeout counter enabled, nCS released when timeout expires*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_Flags  QSPI Flags
+  * @{
+  */
+#define QSPI_FLAG_BUSY                      QUADSPI_SR_BUSY /*!<Busy flag: operation is ongoing*/
+#define QSPI_FLAG_TO                        QUADSPI_SR_TOF  /*!<Timeout flag: timeout occurs in memory-mapped mode*/
+#define QSPI_FLAG_SM                        QUADSPI_SR_SMF  /*!<Status match flag: received data matches in autopolling mode*/
+#define QSPI_FLAG_FT                        QUADSPI_SR_FTF  /*!<Fifo threshold flag: Fifo threshold reached or data left after read from memory is complete*/
+#define QSPI_FLAG_TC                        QUADSPI_SR_TCF  /*!<Transfer complete flag: programmed number of data have been transferred or the transfer has been aborted*/
+#define QSPI_FLAG_TE                        QUADSPI_SR_TEF  /*!<Transfer error flag: invalid address is being accessed*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_Interrupts  QSPI Interrupts
+  * @{
+  */
+#define QSPI_IT_TO                          QUADSPI_CR_TOIE /*!<Interrupt on the timeout flag*/
+#define QSPI_IT_SM                          QUADSPI_CR_SMIE /*!<Interrupt on the status match flag*/
+#define QSPI_IT_FT                          QUADSPI_CR_FTIE /*!<Interrupt on the fifo threshold flag*/
+#define QSPI_IT_TC                          QUADSPI_CR_TCIE /*!<Interrupt on the transfer complete flag*/
+#define QSPI_IT_TE                          QUADSPI_CR_TEIE /*!<Interrupt on the transfer error flag*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_Timeout_definition QSPI Timeout definition
+  * @{
+  */
+#define HAL_QPSI_TIMEOUT_DEFAULT_VALUE ((uint32_t)5000)/* 5 s */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup QSPI_Exported_Macros QSPI Exported Macros
+  * @{
+  */
+
+/** @brief Reset QSPI handle state
+  * @param  __HANDLE__: QSPI handle.
+  * @retval None
+  */
+#define __HAL_QSPI_RESET_HANDLE_STATE(__HANDLE__)           ((__HANDLE__)->State = HAL_QSPI_STATE_RESET)
+
+/** @brief  Enable QSPI
+  * @param  __HANDLE__: specifies the QSPI Handle.
+  * @retval None
+  */
+#define __HAL_QSPI_ENABLE(__HANDLE__)                       SET_BIT((__HANDLE__)->Instance->CR, QUADSPI_CR_EN)
+
+/** @brief  Disable QSPI
+  * @param  __HANDLE__: specifies the QSPI Handle.
+  * @retval None
+  */
+#define __HAL_QSPI_DISABLE(__HANDLE__)                      CLEAR_BIT((__HANDLE__)->Instance->CR, QUADSPI_CR_EN)
+
+/** @brief  Enables the specified QSPI interrupt.
+  * @param  __HANDLE__: specifies the QSPI Handle.
+  * @param  __INTERRUPT__: specifies the QSPI interrupt source to enable.
+  *          This parameter can be one of the following values:
+  *            @arg QSPI_IT_TO: QSPI Time out interrupt
+  *            @arg QSPI_IT_SM: QSPI Status match interrupt
+  *            @arg QSPI_IT_FT: QSPI FIFO threshold interrupt
+  *            @arg QSPI_IT_TC: QSPI Transfer complete interrupt
+  *            @arg QSPI_IT_TE: QSPI Transfer error interrupt
+  * @retval None
+  */
+#define __HAL_QSPI_ENABLE_IT(__HANDLE__, __INTERRUPT__)     SET_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__))
+
+
+/** @brief  Disables the specified QSPI interrupt.
+  * @param  __HANDLE__: specifies the QSPI Handle.
+  * @param  __INTERRUPT__: specifies the QSPI interrupt source to disable.
+  *          This parameter can be one of the following values:
+  *            @arg QSPI_IT_TO: QSPI Timeout interrupt
+  *            @arg QSPI_IT_SM: QSPI Status match interrupt
+  *            @arg QSPI_IT_FT: QSPI FIFO threshold interrupt
+  *            @arg QSPI_IT_TC: QSPI Transfer complete interrupt
+  *            @arg QSPI_IT_TE: QSPI Transfer error interrupt
+  * @retval None
+  */
+#define __HAL_QSPI_DISABLE_IT(__HANDLE__, __INTERRUPT__)    CLEAR_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__))
+
+/** @brief  Checks whether the specified QSPI interrupt source is enabled.
+  * @param  __HANDLE__: specifies the QSPI Handle.
+  * @param  __INTERRUPT__: specifies the QSPI interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg QSPI_IT_TO: QSPI Time out interrupt
+  *            @arg QSPI_IT_SM: QSPI Status match interrupt
+  *            @arg QSPI_IT_FT: QSPI FIFO threshold interrupt
+  *            @arg QSPI_IT_TC: QSPI Transfer complete interrupt
+  *            @arg QSPI_IT_TE: QSPI Transfer error interrupt
+  * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+  */
+#define __HAL_QSPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (READ_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__)) == (__INTERRUPT__))
+
+/**
+  * @brief  Get the selected QSPI's flag status.
+  * @param  __HANDLE__: specifies the QSPI Handle.
+  * @param  __FLAG__: specifies the QSPI flag to check.
+  *          This parameter can be one of the following values:
+  *            @arg QSPI_FLAG_BUSY: QSPI Busy flag
+  *            @arg QSPI_FLAG_TO:   QSPI Time out flag
+  *            @arg QSPI_FLAG_SM:   QSPI Status match flag
+  *            @arg QSPI_FLAG_FT:   QSPI FIFO threshold flag
+  *            @arg QSPI_FLAG_TC:   QSPI Transfer complete flag
+  *            @arg QSPI_FLAG_TE:   QSPI Transfer error flag
+  * @retval None
+  */
+#define __HAL_QSPI_GET_FLAG(__HANDLE__, __FLAG__)           (READ_BIT((__HANDLE__)->Instance->SR, (__FLAG__)) != 0)
+
+/** @brief  Clears the specified QSPI's flag status.
+  * @param  __HANDLE__: specifies the QSPI Handle.
+  * @param  __FLAG__: specifies the QSPI clear register flag that needs to be set
+  *          This parameter can be one of the following values:
+  *            @arg QSPI_FLAG_TO: QSPI Time out flag
+  *            @arg QSPI_FLAG_SM: QSPI Status match flag
+  *            @arg QSPI_FLAG_TC: QSPI Transfer complete flag
+  *            @arg QSPI_FLAG_TE: QSPI Transfer error flag
+  * @retval None
+  */
+#define __HAL_QSPI_CLEAR_FLAG(__HANDLE__, __FLAG__)         WRITE_REG((__HANDLE__)->Instance->FCR, (__FLAG__))
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup QSPI_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup QSPI_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization/de-initialization functions  ********************************/
+HAL_StatusTypeDef     HAL_QSPI_Init     (QSPI_HandleTypeDef *hqspi);
+HAL_StatusTypeDef     HAL_QSPI_DeInit   (QSPI_HandleTypeDef *hqspi);
+void                  HAL_QSPI_MspInit  (QSPI_HandleTypeDef *hqspi);
+void                  HAL_QSPI_MspDeInit(QSPI_HandleTypeDef *hqspi);
+/**
+  * @}
+  */
+
+/** @addtogroup QSPI_Exported_Functions_Group2
+  * @{
+  */
+/* IO operation functions *****************************************************/
+/* QSPI IRQ handler method */
+void                  HAL_QSPI_IRQHandler(QSPI_HandleTypeDef *hqspi);
+
+/* QSPI indirect mode */
+HAL_StatusTypeDef     HAL_QSPI_Command      (QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, uint32_t Timeout);
+HAL_StatusTypeDef     HAL_QSPI_Transmit     (QSPI_HandleTypeDef *hqspi, uint8_t *pData, uint32_t Timeout);
+HAL_StatusTypeDef     HAL_QSPI_Receive      (QSPI_HandleTypeDef *hqspi, uint8_t *pData, uint32_t Timeout);
+HAL_StatusTypeDef     HAL_QSPI_Command_IT   (QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd);
+HAL_StatusTypeDef     HAL_QSPI_Transmit_IT  (QSPI_HandleTypeDef *hqspi, uint8_t *pData);
+HAL_StatusTypeDef     HAL_QSPI_Receive_IT   (QSPI_HandleTypeDef *hqspi, uint8_t *pData);
+HAL_StatusTypeDef     HAL_QSPI_Transmit_DMA (QSPI_HandleTypeDef *hqspi, uint8_t *pData);
+HAL_StatusTypeDef     HAL_QSPI_Receive_DMA  (QSPI_HandleTypeDef *hqspi, uint8_t *pData);
+
+/* QSPI status flag polling mode */
+HAL_StatusTypeDef     HAL_QSPI_AutoPolling   (QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_AutoPollingTypeDef *cfg, uint32_t Timeout);
+HAL_StatusTypeDef     HAL_QSPI_AutoPolling_IT(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_AutoPollingTypeDef *cfg);
+
+/* QSPI memory-mapped mode */
+HAL_StatusTypeDef     HAL_QSPI_MemoryMapped(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_MemoryMappedTypeDef *cfg);
+/**
+  * @}
+  */
+
+/** @addtogroup QSPI_Exported_Functions_Group3
+  * @{
+  */
+/* Callback functions in non-blocking modes ***********************************/
+void                  HAL_QSPI_ErrorCallback        (QSPI_HandleTypeDef *hqspi);
+void                  HAL_QSPI_FifoThresholdCallback(QSPI_HandleTypeDef *hqspi);
+
+/* QSPI indirect mode */
+void                  HAL_QSPI_CmdCpltCallback      (QSPI_HandleTypeDef *hqspi);
+void                  HAL_QSPI_RxCpltCallback       (QSPI_HandleTypeDef *hqspi);
+void                  HAL_QSPI_TxCpltCallback       (QSPI_HandleTypeDef *hqspi);
+void                  HAL_QSPI_RxHalfCpltCallback   (QSPI_HandleTypeDef *hqspi);
+void                  HAL_QSPI_TxHalfCpltCallback   (QSPI_HandleTypeDef *hqspi);
+
+/* QSPI status flag polling mode */
+void                  HAL_QSPI_StatusMatchCallback  (QSPI_HandleTypeDef *hqspi);
+
+/* QSPI memory-mapped mode */
+void                  HAL_QSPI_TimeOutCallback      (QSPI_HandleTypeDef *hqspi);
+/**
+  * @}
+  */
+
+/** @addtogroup QSPI_Exported_Functions_Group4
+  * @{
+  */
+/* Peripheral Control and State functions  ************************************/
+HAL_QSPI_StateTypeDef HAL_QSPI_GetState(QSPI_HandleTypeDef *hqspi);
+uint32_t              HAL_QSPI_GetError(QSPI_HandleTypeDef *hqspi);
+HAL_StatusTypeDef     HAL_QSPI_Abort   (QSPI_HandleTypeDef *hqspi);
+void                  HAL_QSPI_SetTimeout(QSPI_HandleTypeDef *hqspi, uint32_t Timeout);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup QSPI_Private_Constants QSPI Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup QSPI_Private_Macros QSPI Private Macros
+  * @{
+  */
+/** @defgroup QSPI_ClockPrescaler QSPI Clock Prescaler
+  * @{
+  */
+#define IS_QSPI_CLOCK_PRESCALER(PRESCALER)  ((PRESCALER) <= 0xFF)
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_FifoThreshold  QSPI Fifo Threshold
+  * @{
+  */
+#define IS_QSPI_FIFO_THRESHOLD(THR)         (((THR) > 0) && ((THR) <= 32))
+/**
+  * @}
+  */
+
+#define IS_QSPI_SSHIFT(SSHIFT)              (((SSHIFT) == QSPI_SAMPLE_SHIFTING_NONE) || \
+                                             ((SSHIFT) == QSPI_SAMPLE_SHIFTING_HALFCYCLE))
+
+/** @defgroup QSPI_FlashSize QSPI Flash Size
+  * @{
+  */
+#define IS_QSPI_FLASH_SIZE(FSIZE)           (((FSIZE) <= 31))
+/**
+  * @}
+  */
+
+#define IS_QSPI_CS_HIGH_TIME(CSHTIME)       (((CSHTIME) == QSPI_CS_HIGH_TIME_1_CYCLE) || \
+                                             ((CSHTIME) == QSPI_CS_HIGH_TIME_2_CYCLE) || \
+                                             ((CSHTIME) == QSPI_CS_HIGH_TIME_3_CYCLE) || \
+                                             ((CSHTIME) == QSPI_CS_HIGH_TIME_4_CYCLE) || \
+                                             ((CSHTIME) == QSPI_CS_HIGH_TIME_5_CYCLE) || \
+                                             ((CSHTIME) == QSPI_CS_HIGH_TIME_6_CYCLE) || \
+                                             ((CSHTIME) == QSPI_CS_HIGH_TIME_7_CYCLE) || \
+                                             ((CSHTIME) == QSPI_CS_HIGH_TIME_8_CYCLE))
+
+#define IS_QSPI_CLOCK_MODE(CLKMODE)         (((CLKMODE) == QSPI_CLOCK_MODE_0) || \
+                                             ((CLKMODE) == QSPI_CLOCK_MODE_3))
+
+#define IS_QSPI_FLASH_ID(FLA)    (((FLA) == QSPI_FLASH_ID_1) || \
+                                  ((FLA) == QSPI_FLASH_ID_2))
+
+#define IS_QSPI_DUAL_FLASH_MODE(MODE)    (((MODE) == QSPI_DUALFLASH_ENABLE) || \
+                                          ((MODE) == QSPI_DUALFLASH_DISABLE))
+
+
+/** @defgroup QSPI_Instruction QSPI Instruction
+  * @{
+  */
+#define IS_QSPI_INSTRUCTION(INSTRUCTION)    ((INSTRUCTION) <= 0xFF)
+/**
+  * @}
+  */
+
+#define IS_QSPI_ADDRESS_SIZE(ADDR_SIZE)     (((ADDR_SIZE) == QSPI_ADDRESS_8_BITS)  || \
+                                             ((ADDR_SIZE) == QSPI_ADDRESS_16_BITS) || \
+                                             ((ADDR_SIZE) == QSPI_ADDRESS_24_BITS) || \
+                                             ((ADDR_SIZE) == QSPI_ADDRESS_32_BITS))
+
+#define IS_QSPI_ALTERNATE_BYTES_SIZE(SIZE)  (((SIZE) == QSPI_ALTERNATE_BYTES_8_BITS)  || \
+                                             ((SIZE) == QSPI_ALTERNATE_BYTES_16_BITS) || \
+                                             ((SIZE) == QSPI_ALTERNATE_BYTES_24_BITS) || \
+                                             ((SIZE) == QSPI_ALTERNATE_BYTES_32_BITS))
+
+
+/** @defgroup QSPI_DummyCycles QSPI Dummy Cycles
+  * @{
+  */
+#define IS_QSPI_DUMMY_CYCLES(DCY)           ((DCY) <= 31)
+/**
+  * @}
+  */
+
+#define IS_QSPI_INSTRUCTION_MODE(MODE)      (((MODE) == QSPI_INSTRUCTION_NONE)    || \
+                                             ((MODE) == QSPI_INSTRUCTION_1_LINE)  || \
+                                             ((MODE) == QSPI_INSTRUCTION_2_LINES) || \
+                                             ((MODE) == QSPI_INSTRUCTION_4_LINES))
+
+#define IS_QSPI_ADDRESS_MODE(MODE)          (((MODE) == QSPI_ADDRESS_NONE)    || \
+                                             ((MODE) == QSPI_ADDRESS_1_LINE)  || \
+                                             ((MODE) == QSPI_ADDRESS_2_LINES) || \
+                                             ((MODE) == QSPI_ADDRESS_4_LINES))
+
+#define IS_QSPI_ALTERNATE_BYTES_MODE(MODE)  (((MODE) == QSPI_ALTERNATE_BYTES_NONE)    || \
+                                             ((MODE) == QSPI_ALTERNATE_BYTES_1_LINE)  || \
+                                             ((MODE) == QSPI_ALTERNATE_BYTES_2_LINES) || \
+                                             ((MODE) == QSPI_ALTERNATE_BYTES_4_LINES))
+
+#define IS_QSPI_DATA_MODE(MODE)             (((MODE) == QSPI_DATA_NONE)    || \
+                                             ((MODE) == QSPI_DATA_1_LINE)  || \
+                                             ((MODE) == QSPI_DATA_2_LINES) || \
+                                             ((MODE) == QSPI_DATA_4_LINES))
+
+#define IS_QSPI_DDR_MODE(DDR_MODE)          (((DDR_MODE) == QSPI_DDR_MODE_DISABLE) || \
+                                             ((DDR_MODE) == QSPI_DDR_MODE_ENABLE))
+
+#define IS_QSPI_DDR_HHC(DDR_HHC)            (((DDR_HHC) == QSPI_DDR_HHC_ANALOG_DELAY) || \
+                                             ((DDR_HHC) == QSPI_DDR_HHC_HALF_CLK_DELAY))
+
+#define IS_QSPI_SIOO_MODE(SIOO_MODE)      (((SIOO_MODE) == QSPI_SIOO_INST_EVERY_CMD) || \
+                                             ((SIOO_MODE) == QSPI_SIOO_INST_ONLY_FIRST_CMD))
+
+/** @defgroup QSPI_Interval QSPI Interval
+  * @{
+  */
+#define IS_QSPI_INTERVAL(INTERVAL)        ((INTERVAL) <= QUADSPI_PIR_INTERVAL)
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_StatusBytesSize QSPI Status Bytes Size
+  * @{
+  */
+#define IS_QSPI_STATUS_BYTES_SIZE(SIZE)   (((SIZE) >= 1) && ((SIZE) <= 4))
+/**
+  * @}
+  */
+#define IS_QSPI_MATCH_MODE(MODE)            (((MODE) == QSPI_MATCH_MODE_AND) || \
+                                             ((MODE) == QSPI_MATCH_MODE_OR))
+
+#define IS_QSPI_AUTOMATIC_STOP(APMS)        (((APMS) == QSPI_AUTOMATIC_STOP_DISABLE) || \
+                                             ((APMS) == QSPI_AUTOMATIC_STOP_ENABLE))
+
+#define IS_QSPI_TIMEOUT_ACTIVATION(TCEN)    (((TCEN) == QSPI_TIMEOUT_COUNTER_DISABLE) || \
+                                             ((TCEN) == QSPI_TIMEOUT_COUNTER_ENABLE))
+
+/** @defgroup QSPI_TimeOutPeriod  QSPI TimeOut Period
+  * @{
+  */
+#define IS_QSPI_TIMEOUT_PERIOD(PERIOD)      ((PERIOD) <= 0xFFFF)
+/**
+  * @}
+  */
+
+#define IS_QSPI_GET_FLAG(FLAG)              (((FLAG) == QSPI_FLAG_BUSY) || \
+                                             ((FLAG) == QSPI_FLAG_TO)   || \
+                                             ((FLAG) == QSPI_FLAG_SM)   || \
+                                             ((FLAG) == QSPI_FLAG_FT)   || \
+                                             ((FLAG) == QSPI_FLAG_TC)   || \
+                                             ((FLAG) == QSPI_FLAG_TE))
+
+#define IS_QSPI_IT(IT)                      ((((IT) & (uint32_t)0xFFE0FFFF) == 0x00000000) && ((IT) != 0x00000000))
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup QSPI_Private_Functions QSPI Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* STM32F446xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_QSPI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/