/*
* mgmt-cli.c
* ---------
* Management CLI code.
*
* Copyright (c) 2016-2017, NORDUnet A/S All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* - Neither the name of the NORDUnet nor the names of its contributors may
* be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
* IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
* PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
* TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <string.h>
/* Rename both CMSIS HAL_OK and libhal HAL_OK to disambiguate */
#define HAL_OK CMSIS_HAL_OK
#include "stm-init.h"
#include "stm-uart.h"
#include "stm-led.h"
#include "mgmt-cli.h"
#include "mgmt-fpga.h"
#include "mgmt-misc.h"
#include "mgmt-show.h"
#include "mgmt-test.h"
#include "mgmt-keystore.h"
#include "mgmt-masterkey.h"
#undef HAL_OK
#define HAL_OK LIBHAL_OK
#include "hal.h"
#undef HAL_OK
#ifndef CLI_UART_RECVBUF_SIZE
#define CLI_UART_RECVBUF_SIZE 256
#endif
typedef struct {
unsigned ridx;
unsigned widx;
mgmt_cli_dma_state_t rx_state;
uint8_t buf[CLI_UART_RECVBUF_SIZE];
} ringbuf_t;
inline void ringbuf_init(ringbuf_t *rb)
{
memset(rb, 0, sizeof(*rb));
}
/* return number of characters read */
inline int ringbuf_read_char(ringbuf_t *rb, uint8_t *c)
{
if (rb->ridx != rb->widx) {
*c = rb->buf[rb->ridx];
if (++rb->ridx >= sizeof(rb->buf))
rb->ridx = 0;
return 1;
}
return 0;
}
inline void ringbuf_write_char(ringbuf_t *rb, uint8_t c)
{
rb->buf[rb->widx] = c;
if (++rb->widx >= sizeof(rb->buf))
rb->widx = 0;
}
static ringbuf_t uart_ringbuf;
/* current character received from UART */
static uint8_t uart_rx;
/* Callback for HAL_UART_Receive_DMA().
*/
void HAL_UART1_RxCpltCallback(UART_HandleTypeDef *huart)
{
huart = huart;
ringbuf_write_char(&uart_ringbuf, uart_rx);
}
static void uart_cli_print(struct cli_def *cli __attribute__ ((unused)), const char *buf)
{
uart_send_string(buf);
uart_send_string("\r\n");
}
static ssize_t uart_cli_read(struct cli_def *cli __attribute__ ((unused)), void *buf, size_t count)
{
for (size_t i = 0; i < count; ++i) {
while (ringbuf_read_char(&uart_ringbuf, (uint8_t *)(buf + i)) == 0) {
}
}
return (ssize_t)count;
}
static ssize_t uart_cli_write(struct cli_def *cli __attribute__ ((unused)), const void *buf, size_t count)
{
uart_send_bytes((uint8_t *) buf, count);
return (ssize_t)count;
}
int control_mgmt_uart_dma_rx(mgmt_cli_dma_state_t state)
{
if (state == DMA_RX_START) {
if (uart_ringbuf.rx_state != DMA_RX_START) {
ringbuf_init(&uart_ringbuf);
HAL_UART_Receive_DMA(&huart_mgmt, &uart_rx, 1);
uart_ringbuf.rx_state = DMA_RX_START;
}
return 1;
} else if (state == DMA_RX_STOP) {
if (HAL_UART_DMAStop(&huart_mgmt) != CMSIS_HAL_OK) return 0;
uart_ringbuf.rx_state = DMA_RX_STOP;
return 1;
}
return 0;
}
static struct cli_def *mgmt_cli_init(void)
{
struct cli_def *cli;
cli = cli_init();
cli_read_callback(cli, uart_cli_read);
cli_write_callback(cli, uart_cli_write);
cli_print_callback(cli, uart_cli_print);
cli_set_banner(cli, "Cryptech Alpha test CLI");
cli_set_hostname(cli, "cryptech");
return cli;
}
hal_user_t user;
static int check_auth(const char *username, const char *password)
{
if (strcmp(username, "ct") != 0)
return CLI_ERROR;
if (strcmp(password, "ct") != 0)
return CLI_ERROR;
return CLI_OK;
}
int cli_main(void)
{
struct cli_def *cli;
cli = mgmt_cli_init();
cli_set_auth_callback(cli, check_auth);
configure_cli_show(cli);
configure_cli_fpga(cli);
configure_cli_misc(cli);
configure_cli_test(cli);
configure_cli_keystore(cli);
configure_cli_masterkey(cli);
configure_cli_keywrap(cli);
while (1) {
control_mgmt_uart_dma_rx(DMA_RX_START);
cli_loop(cli, 0);
/* cli_loop returns when the user enters 'quit' or 'exit' */
cli_print(cli, "\nLogging out...\n");
user = HAL_USER_NONE;
}
/*NOTREACHED*/
return -1;
}