/**
******************************************************************************
* @file stm32f4xx_hal_sram.c
* @author MCD Application Team
* @version V1.3.2
* @date 26-June-2015
* @brief SRAM HAL module driver.
* This file provides a generic firmware to drive SRAM memories
* mounted as external device.
*
@verbatim
==============================================================================
##### How to use this driver #####
==============================================================================
[..]
This driver is a generic layered driver which contains a set of APIs used to
control SRAM memories. It uses the FMC layer functions to interface
with SRAM devices.
The following sequence should be followed to configure the FMC/FSMC to interface
with SRAM/PSRAM memories:
(#) Declare a SRAM_HandleTypeDef handle structure, for example:
SRAM_HandleTypeDef hsram; and:
(++) Fill the SRAM_HandleTypeDef handle "Init" field with the allowed
values of the structure member.
(++) Fill the SRAM_HandleTypeDef handle "Instance" field with a predefined
base register instance for NOR or SRAM device
(++) Fill the SRAM_HandleTypeDef handle "Extended" field with a predefined
base register instance for NOR or SRAM extended mode
(#) Declare two FMC_NORSRAM_TimingTypeDef structures, for both normal and extended
mode timings; for example:
FMC_NORSRAM_TimingTypeDef Timing and FMC_NORSRAM_TimingTypeDef ExTiming;
and fill its fields with the allowed values of the structure member.
(#) Initialize the SRAM Controller by calling the function HAL_SRAM_Init(). This function
performs the following sequence:
(##) MSP hardware layer configuration using the function HAL_SRAM_MspInit()
(##) Control register configuration using the FMC NORSRAM interface function
FMC_NORSRAM_Init()
(##) Timing register configuration using the FMC NORSRAM interface function
FMC_NORSRAM_Timing_Init()
(##) Extended mode Timing register configuration using the FMC NORSRAM interface function
FMC_NORSRAM_Extended_Timing_Init()
(##) Enable the SRAM device using the macro __FMC_NORSRAM_ENABLE()
(#) At this stage you can perform read/write accesses from/to the memory connected
to the NOR/SRAM Bank. You can perform either polling or DMA transfer using the
following APIs:
(++) HAL_SRAM_Read()/HAL_SRAM_Write() for polling read/write access
(++) HAL_SRAM_Read_DMA()/HAL_SRAM_Write_DMA() for DMA read/write transfer
(#) You can also control the SRAM device by calling the control APIs HAL_SRAM_WriteOperation_Enable()/
HAL_SRAM_WriteOperation_Disable() to respectively enable/disable the SRAM write operation
(#) You can continuously monitor the SRAM device HAL state by calling the function
HAL_SRAM_GetState()
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @defgroup SRAM SRAM
* @brief SRAM driver modules
* @{
*/
#ifdef HAL_SRAM_MODULE_ENABLED
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
defined(STM32F446xx)
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup SRAM_Exported_Functions SRAM Exported Functions
* @{
*/
/** @defgroup SRAM_Exported_Functions_Group1 Initialization and de-initialization functions
* @brief Initialization and Configuration functions
*
@verbatim
==============================================================================
##### SRAM Initialization and de_initialization functions #####
==============================================================================
[..] This section provides functions allowing to initialize/de-initialize
the SRAM memory
@endverbatim
* @{
*/
/**
* @brief Performs the SRAM device initialization sequence
* @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
* the configuration information for SRAM module.
* @param Timing: Pointer to SRAM control timing structure
* @param ExtTiming: Pointer to SRAM extended mode timing structure
* @retval HAL status
*/
HAL_StatusTypeDef HAL_SRAM_Init(SRAM_HandleTypeDef *hsram, FMC_NORSRAM_TimingTypeDef *Timing, FMC_NORSRAM_TimingTypeDef *ExtTiming)
{
/* Check the SRAM handle parameter */
if(hsram == NULL)
{
return HAL_ERROR;
}
if(hsram->State == HAL_SRAM_STATE_RESET)
{
/* Allocate lock resource and initialize it */
hsram->Lock = HAL_UNLOCKED;
/* Initialize the low level hardware (MSP) */
HAL_SRAM_MspInit(hsram);
}
/* Initialize SRAM control Interface */
FMC_NORSRAM_Init(hsram->Instance, &(hsram->Init));
/* Initialize SRAM timing Interface */
FMC_NORSRAM_Timing_Init(hsram->Instance, Timing, hsram->Init.NSBank);
/* Initialize SRAM extended mode timing Interface */
FMC_NORSRAM_Extended_Timing_Init(hsram->Extended, ExtTiming, hsram->Init.NSBank, hsram->Init.ExtendedMode);
/* Enable the NORSRAM device */
__FMC_NORSRAM_ENABLE(hsram->Instance, hsram->Init.NSBank);
return HAL_OK;
}
/**
* @brief Performs the SRAM device De-initialization sequence.
* @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
* the configuration information for SRAM module.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_SRAM_DeInit(SRAM_HandleTypeDef *hsram)
{
/* De-Initialize the low level hardware (MSP) */
HAL_SRAM_MspDeInit(hsram);
/* Configure the SRAM registers with their reset values */
FMC_NORSRAM_DeInit(hsram->Instance, hsram->Extended, hsram->Init.NSBank);
hsram->State = HAL_SRAM_STATE_RESET;
/* Release Lock */
__HAL_UNLOCK(hsram);
return HAL_OK;
}
/**
* @brief SRAM MSP Init.
* @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
* the configuration information for SRAM module.
* @retval None
*/
__weak void HAL_SRAM_MspInit(SRAM_HandleTypeDef *hsram)
{
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_SRAM_MspInit could be implemented in the user file
*/
}
/**
* @brief SRAM MSP DeInit.
* @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
* the configuration information for SRAM module.
* @retval None
*/
__weak void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef *hsram)
{
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_SRAM_MspDeInit could be implemented in the user file
*/
}
/**
* @brief DMA transfer complete callback.
* @param hdma: pointer to a SRAM_HandleTypeDef structure that contains
* the configuration information for SRAM module.
* @retval None
*/
__weak void HAL_SRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma)
{
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_SRAM_DMA_XferCpltCallback could be implemented in the user file
*/
}
/**
* @brief DMA transfer complete error callback.
* @param hdma: pointer to a SRAM_HandleTypeDef structure that contains
* the configuration information for SRAM module.
* @retval None
*/
__weak void HAL_SRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma)
{
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_SRAM_DMA_XferErrorCallback could be implemented in the user file
*/
}
/**
* @}
*/
/** @defgroup SRAM_Exported_Functions_Group2 Input and Output functions
* @brief Input Output and memory control functions
*
@verbatim
==============================================================================
##### SRAM Input and Output functions #####
==============================================================================
[..]
This section provides functions allowing to use and control the SRAM memory
@endverbatim
* @{
*/
/**
* @brief Reads 8-bit buffer from SRAM memory.
* @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
* the configuration information for SRAM module.
* @param pAddress: Pointer to read start address
* @param pDstBuffer: Pointer to destination buffer
* @param BufferSize: Size of the buffer to read from memory
* @retval HAL status
*/
HAL_StatusTypeDef HAL_SRAM_Read_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pDstBuffer, uint32_t BufferSize)
{
__IO uint8_t * pSramAddress = (uint8_t *)pAddress;
/* Process Locked */
__HAL_LOCK(hsram);
/* Update the SRAM controller state */
hsram->State = HAL_SRAM_STATE_BUSY;
/* Read data from memory */
for(; BufferSize != 0; BufferSize--)
{
*pDstBuffer = *(__IO uint8_t *)pSramAddress;
pDstBuffer++;
pSramAddress++;
}
/* Update the SRAM controller state */
hsram->State = HAL_SRAM_STATE_READY;
/* Process unlocked */
__HAL_UNLOCK(hsram);
return HAL_OK;
}
/**
* @brief Writes 8-bit buffer to SRAM memory.
* @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
* the configuration information for SRAM module.
* @param pAddress: Pointer to write start address
* @param pSrcBuffer: Pointer to source buffer to write
* @param BufferSize: Size of the buffer to write to memory
* @retval HAL status
*/
HAL_StatusTypeDef HAL_SRAM_Write_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pSrcBuffer, uint32_t BufferSize)
{
__IO uint8_t * pSramAddress = (uint8_t *)pAddress;
/* Check the SRAM controller state */
if(hsram->State == HAL_SRAM_STATE_PROTECTED)
{
return HAL_ERROR;
}
/* Process Locked */
__HAL_LOCK(hsram);
/* Update the SRAM controller state */
hsram->State = HAL_SRAM_STATE_BUSY;
/* Write data to memory */
for(; BufferSize != 0; BufferSize--)
{
*(__IO uint8_t *)pSramAddress = *pSrcBuffer;
pSrcBuffer++;
pSramAddress++;
}
/* Update the SRAM controller state */
hsram->State = HAL_SRAM_STATE_READY;
/* Process unlocked */
__HAL_UNLOCK(hsram);
return HAL_OK;
}
/**
* @brief Reads 16-bit buffer from SRAM memory.
* @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
* the configuration information for SRAM module.
* @param pAddress: Pointer to read start address
* @param pDstBuffer: Pointer to destination buffer
* @param BufferSize: Size of the buffer to read from memory
* @retval HAL status
*/
HAL_StatusTypeDef HAL_SRAM_Read_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pDstBuffer, uint32_t BufferSize)
{
__IO uint16_t * pSramAddress = (uint16_t *)pAddress;
/* Process Locked */
__HAL_LOCK(hsram);
/* Update the SRAM controller state */
hsram->State = HAL_SRAM_STATE_BUSY;
/* Read data from memory */
for(; BufferSize != 0; BufferSize--)
{
*pDstBuffer = *(__IO uint16_t *)pSramAddress;
pDstBuffer++;
pSramAddress++;
}
/* Update the SRAM controller state */
hsram->State = HAL_SRAM_STATE_READY;
/* Process unlocked */
__HAL_UNLOCK(hsram);
return HAL_OK;
}
/**
* @brief Writes 16-bit buffer to SRAM memory.
* @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
* the configuration information for SRAM module.
* @param pAddress: Pointer to write start address
* @param pSrcBuffer: Pointer to source buffer to write
* @param BufferSize: Size of the buffer to write to memory
* @retval HAL status
*/
HAL_StatusTypeDef HAL_SRAM_Write_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pSrcBuffer, uint32_t BufferSize)
{
__IO uint16_t * pSramAddress = (uint16_t *)pAddress;
/* Check the SRAM controller state */
if(hsram->State == HAL_SRAM_STATE_PROTECTED)
{
return HAL_ERROR;
}
/* Process Locked */
__HAL_LOCK(hsram);
/* Update the SRAM controller state */
hsram->State = HAL_SRAM_STATE_BUSY;
/* Write data to memory */
for(; BufferSize != 0; BufferSize--)
{
*(__IO uint16_t *)pSramAddress = *pSrcBuffer;
pSrcBuffer++;
pSramAddress++;
}
/* Update the SRAM controller state */
hsram->State = HAL_SRAM_STATE_READY;
/* Process unlocked */
__HAL_UNLOCK(hsram);
return HAL_OK;
}
/**
* @brief Reads 32-bit buffer from SRAM memory.
* @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
* the configuration information for SRAM module.
* @param pAddress: Pointer to read start address
* @param pDstBuffer: Pointer to destination buffer
* @param BufferSize: Size of the buffer to read from memory
* @retval HAL status
*/
HAL_StatusTypeDef HAL_SRAM_Read_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize)
{
/* Process Locked */
__HAL_LOCK(hsram);
/* Update the SRAM controller state */
hsram->State = HAL_SRAM_STATE_BUSY;
/* Read data from memory */
for(; BufferSize != 0; BufferSize--)
{
*pDstBuffer = *(__IO uint32_t *)pAddress;
pDstBuffer++;
pAddress++;
}
/* Update the SRAM controller state */
hsram->State = HAL_SRAM_STATE_READY;
/* Process unlocked */
__HAL_UNLOCK(hsram);
return HAL_OK;
}
/**
* @brief Writes 32-bit buffer to SRAM memory.
* @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
* the configuration information for SRAM module.
* @param pAddress: Pointer to write start address
* @param pSrcBuffer: Pointer to source buffer to write
* @param BufferSize: Size of the buffer to write to memory
* @retval HAL status
*/
HAL_StatusTypeDef HAL_SRAM_Write_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize)
{
/* Check the SRAM controller state */
if(hsram->State == HAL_SRAM_STATE_PROTECTED)
{
return HAL_ERROR;
}
/* Process Locked */
__HAL_LOCK(hsram);
/* Update the SRAM controller state */
hsram->State = HAL_SRAM_STATE_BUSY;
/* Write data to memory */
for(; BufferSize != 0; BufferSize--)
{
*(__IO uint32_t *)pAddress = *pSrcBuffer;
pSrcBuffer++;
pAddress++;
}
/* Update the SRAM controller state */
hsram->State = HAL_SRAM_STATE_READY;
/* Process unlocked */
__HAL_UNLOCK(hsram);
return HAL_OK;
}
/**
* @brief Reads a Words data from the SRAM memory using DMA transfer.
* @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
* the configuration information for SRAM module.
* @param pAddress: Pointer to read start address
* @param pDstBuffer: Pointer to destination buffer
* @param BufferSize: Size of the buffer to read from memory
* @retval HAL status
*/
HAL_StatusTypeDef HAL_SRAM_Read_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize)
{
/* Process Locked */
__HAL_LOCK(hsram);
/* Update the SRAM controller state */
hsram->State = HAL_SRAM_STATE_BUSY;
/* Configure DMA user callbacks */
hsram->hdma->XferCpltCallback = HAL_SRAM_DMA_XferCpltCallback;
hsram->hdma->XferErrorCallback = HAL_SRAM_DMA_XferErrorCallback;
/* Enable the DMA Stream */
HAL_DMA_Start_IT(hsram->hdma, (uint32_t)pAddress, (uint32_t)pDstBuffer, (uint32_t)BufferSize);
/* Update the SRAM controller state */
hsram->State = HAL_SRAM_STATE_READY;
/* Process unlocked */
__HAL_UNLOCK(hsram);
return HAL_OK;
}
/**
* @brief Writes a Words data buffer to SRAM memory using DMA transfer.
* @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
* the configuration information for SRAM module.
* @param pAddress: Pointer to write start address
* @param pSrcBuffer: Pointer to source buffer to write
* @param BufferSize: Size of the buffer to write to memory
* @retval HAL status
*/
HAL_StatusTypeDef HAL_SRAM_Write_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize)
{
/* Check the SRAM controller state */
if(hsram->State == HAL_SRAM_STATE_PROTECTED)
{
return HAL_ERROR;
}
/* Process Locked */
__HAL_LOCK(hsram);
/* Update the SRAM controller state */
hsram->State = HAL_SRAM_STATE_BUSY;
/* Configure DMA user callbacks */
hsram->hdma->XferCpltCallback = HAL_SRAM_DMA_XferCpltCallback;
hsram->hdma->XferErrorCallback = HAL_SRAM_DMA_XferErrorCallback;
/* Enable the DMA Stream */
HAL_DMA_Start_IT(hsram->hdma, (uint32_t)pSrcBuffer, (uint32_t)pAddress, (uint32_t)BufferSize);
/* Update the SRAM controller state */
hsram->State = HAL_SRAM_STATE_READY;
/* Process unlocked */
__HAL_UNLOCK(hsram);
return HAL_OK;
}
/**
* @}
*/
/** @defgroup SRAM_Exported_Functions_Group3 Control functions
* @brief management functions
*
@verbatim
==============================================================================
##### SRAM Control functions #####
==============================================================================
[..]
This subsection provides a set of functions allowing to control dynamically
the SRAM interface.
@endverbatim
* @{
*/
/**
* @brief Enables dynamically SRAM write operation.
* @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
* the configuration information for SRAM module.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_SRAM_WriteOperation_Enable(SRAM_HandleTypeDef *hsram)
{
/* Process Locked */
__HAL_LOCK(hsram);
/* Enable write operation */
FMC_NORSRAM_WriteOperation_Enable(hsram->Instance, hsram->Init.NSBank);
/* Update the SRAM controller state */
hsram->State = HAL_SRAM_STATE_READY;
/* Process unlocked */
__HAL_UNLOCK(hsram);
return HAL_OK;
}
/**
* @brief Disables dynamically SRAM write operation.
* @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
* the configuration information for SRAM module.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_SRAM_WriteOperation_Disable(SRAM_HandleTypeDef *hsram)
{
/* Process Locked */
__HAL_LOCK(hsram);
/* Update the SRAM controller state */
hsram->State = HAL_SRAM_STATE_BUSY;
/* Disable write operation */
FMC_NORSRAM_WriteOperation_Disable(hsram->Instance, hsram->Init.NSBank);
/* Update the SRAM controller state */
hsram->State = HAL_SRAM_STATE_PROTECTED;
/* Process unlocked */
__HAL_UNLOCK(hsram);
return HAL_OK;
}
/**
* @}
*/
/** @defgroup SRAM_Exported_Functions_Group4 State functions
* @brief Peripheral State functions
*
@verbatim
==============================================================================
##### SRAM State functions #####
==============================================================================
[..]
This subsection permits to get in run-time the status of the SRAM controller
and the data flow.
@endverbatim
* @{
*/
/**
* @brief Returns the SRAM controller state
* @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
* the configuration information for SRAM module.
* @retval HAL state
*/
HAL_SRAM_StateTypeDef HAL_SRAM_GetState(SRAM_HandleTypeDef *hsram)
{
return hsram->State;
}
/**
* @}
*/
/**
* @}
*/
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
#endif /* HAL_SRAM_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
