/**
******************************************************************************
* @file stm32f4xx_hal_dma2d.c
* @author MCD Application Team
* @version V1.3.2
* @date 26-June-2015
* @brief DMA2D HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the DMA2D peripheral:
* + Initialization and de-initialization functions
* + IO operation functions
* + Peripheral Control functions
* + Peripheral State and Errors functions
*
@verbatim
==============================================================================
##### How to use this driver #####
==============================================================================
[..]
(#) Program the required configuration through following parameters:
the Transfer Mode, the output color mode and the output offset using
HAL_DMA2D_Init() function.
(#) Program the required configuration through following parameters:
the input color mode, the input color, input alpha value, alpha mode
and the input offset using HAL_DMA2D_ConfigLayer() function for foreground
or/and background layer.
*** Polling mode IO operation ***
=================================
[..]
(+) Configure the pdata, Destination and data length and Enable
the transfer using HAL_DMA2D_Start()
(+) Wait for end of transfer using HAL_DMA2D_PollForTransfer(), at this stage
user can specify the value of timeout according to his end application.
*** Interrupt mode IO operation ***
===================================
[..]
(#) Configure the pdata, Destination and data length and Enable
the transfer using HAL_DMA2D_Start_IT()
(#) Use HAL_DMA2D_IRQHandler() called under DMA2D_IRQHandler() Interrupt subroutine
(#) At the end of data transfer HAL_DMA2D_IRQHandler() function is executed and user can
add his own function by customization of function pointer XferCpltCallback and
XferErrorCallback (i.e a member of DMA2D handle structure).
-@- In Register-to-Memory transfer mode, the pdata parameter is the register
color, in Memory-to-memory or memory-to-memory with pixel format
conversion the pdata is the source address.
-@- Configure the foreground source address, the background source address,
the Destination and data length and Enable the transfer using
HAL_DMA2D_BlendingStart() in polling mode and HAL_DMA2D_BlendingStart_IT()
in interrupt mode.
-@- HAL_DMA2D_BlendingStart() and HAL_DMA2D_BlendingStart_IT() functions
are used if the memory to memory with blending transfer mode is selected.
(#) Optionally, configure and enable the CLUT using HAL_DMA2D_ConfigCLUT()
HAL_DMA2D_EnableCLUT() functions.
(#) Optionally, configure and enable LineInterrupt using the following function:
HAL_DMA2D_ProgramLineEvent().
(#) The transfer can be suspended, continued and aborted using the following
functions: HAL_DMA2D_Suspend(), HAL_DMA2D_Resume(), HAL_DMA2D_Abort().
(#) To control DMA2D state you can use the following function: HAL_DMA2D_GetState()
*** DMA2D HAL driver macros list ***
=============================================
[..]
Below the list of most used macros in DMA2D HAL driver :
(+) __HAL_DMA2D_ENABLE: Enable the DMA2D peripheral.
(+) __HAL_DMA2D_DISABLE: Disable the DMA2D peripheral.
(+) __HAL_DMA2D_GET_FLAG: Get the DMA2D pending flags.
(+) __HAL_DMA2D_CLEAR_FLAG: Clear the DMA2D pending flags.
(+) __HAL_DMA2D_ENABLE_IT: Enable the specified DMA2D interrupts.
(+) __HAL_DMA2D_DISABLE_IT: Disable the specified DMA2D interrupts.
(+) __HAL_DMA2D_GET_IT_SOURCE: Check whether the specified DMA2D interrupt has occurred or not.
[..]
(@) You can refer to the DMA2D HAL driver header file for more useful macros
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @addtogroup DMA2D
* @brief DMA2D HAL module driver
* @{
*/
#ifdef HAL_DMA2D_MODULE_ENABLED
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
/* Private types -------------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/** @addtogroup DMA2D_Private_Defines
* @{
*/
#define HAL_TIMEOUT_DMA2D_ABORT ((uint32_t)1000) /* 1s */
#define HAL_TIMEOUT_DMA2D_SUSPEND ((uint32_t)1000) /* 1s */
/**
* @}
*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/** @addtogroup DMA2D_Private_Functions_Prototypes
* @{
*/
static void DMA2D_SetConfig(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Height);
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup DMA2D_Exported_Functions
* @{
*/
/** @defgroup DMA2D_Group1 Initialization and Configuration functions
* @brief Initialization and Configuration functions
*
@verbatim
===============================================================================
##### Initialization and Configuration functions #####
===============================================================================
[..] This section provides functions allowing to:
(+) Initialize and configure the DMA2D
(+) De-initialize the DMA2D
@endverbatim
* @{
*/
/**
* @brief Initializes the DMA2D according to the specified
* parameters in the DMA2D_InitTypeDef and create the associated handle.
* @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
* the configuration information for the DMA2D.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMA2D_Init(DMA2D_HandleTypeDef *hdma2d)
{
uint32_t tmp = 0;
/* Check the DMA2D peripheral state */
if(hdma2d == NULL)
{
return HAL_ERROR;
}
/* Check the parameters */
assert_param(IS_DMA2D_ALL_INSTANCE(hdma2d->Instance));
assert_param(IS_DMA2D_MODE(hdma2d->Init.Mode));
assert_param(IS_DMA2D_CMODE(hdma2d->Init.ColorMode));
assert_param(IS_DMA2D_OFFSET(hdma2d->Init.OutputOffset));
if(hdma2d->State == HAL_DMA2D_STATE_RESET)
{
/* Allocate lock resource and initialize it */
hdma2d->Lock = HAL_UNLOCKED;
/* Init the low level hardware */
HAL_DMA2D_MspInit(hdma2d);
}
/* Change DMA2D peripheral state */
hdma2d->State = HAL_DMA2D_STATE_BUSY;
/* DMA2D CR register configuration -------------------------------------------*/
/* Get the CR register value */
tmp = hdma2d->Instance->CR;
/* Clear Mode bits */
tmp &= (uint32_t)~DMA2D_CR_MODE;
/* Prepare the value to be wrote to the CR register */
tmp |= hdma2d->Init.Mode;
/* Write to DMA2D CR register */
hdma2d->Instance->CR = tmp;
/* DMA2D OPFCCR register configuration ---------------------------------------*/
/* Get the OPFCCR register value */
tmp = hdma2d->Instance->OPFCCR;
/* Clear Color Mode bits */
tmp &= (uint32_t)~DMA2D_OPFCCR_CM;
/* Prepare the value to be wrote to the OPFCCR register */
tmp |= hdma2d->Init.ColorMode;
/* Write to DMA2D OPFCCR register */
hdma2d->Instance->OPFCCR = tmp;
/* DMA2D OOR register configuration ------------------------------------------*/
/* Get the OOR register value */
tmp = hdma2d->Instance->OOR;
/* Clear Offset bits */
tmp &= (uint32_t)~DMA2D_OOR_LO;
/* Prepare the value to be wrote to the OOR register */
tmp |= hdma2d->Init.OutputOffset;
/* Write to DMA2D OOR register */
hdma2d->Instance->OOR = tmp;
/* Update error code */
hdma2d->ErrorCode = HAL_DMA2D_ERROR_NONE;
/* Initialize the DMA2D state*/
hdma2d->State = HAL_DMA2D_STATE_READY;
return HAL_OK;
}
/**
* @brief Deinitializes the DMA2D peripheral registers to their default reset
* values.
* @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
* the configuration information for the DMA2D.
* @retval None
*/
HAL_StatusTypeDef HAL_DMA2D_DeInit(DMA2D_HandleTypeDef *hdma2d)
{
/* Check the DMA2D peripheral state */
if(hdma2d == NULL)
{
return HAL_ERROR;
}
/* DeInit the low level hardware */
HAL_DMA2D_MspDeInit(hdma2d);
/* Update error code */
hdma2d->ErrorCode = HAL_DMA2D_ERROR_NONE;
/* Initialize the DMA2D state*/
hdma2d->State = HAL_DMA2D_STATE_RESET;
/* Release Lock */
__HAL_UNLOCK(hdma2d);
return HAL_OK;
}
/**
* @brief Initializes the DMA2D MSP.
* @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
* the configuration information for the DMA2D.
* @retval None
*/
__weak void HAL_DMA2D_MspInit(DMA2D_HandleTypeDef* hdma2d)
{
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_DMA2D_MspInit could be implemented in the user file
*/
}
/**
* @brief DeInitializes the DMA2D MSP.
* @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
* the configuration information for the DMA2D.
* @retval None
*/
__weak void HAL_DMA2D_MspDeInit(DMA2D_HandleTypeDef* hdma2d)
{
/* NOTE : This function Should not be modified, when the callback is needed,
the HAL_DMA2D_MspDeInit could be implemented in the user file
*/
}
/**
* @}
*/
/** @defgroup DMA2D_Group2 IO operation functions
* @brief IO operation functions
*
@verbatim
===============================================================================
##### IO operation functions #####
===============================================================================
[..] This section provides functions allowing to:
(+) Configure the pdata, destination address and data size and
Start DMA2D transfer.
(+) Configure the source for foreground and background, destination address
and data size and Start MultiBuffer DMA2D transfer.
(+) Configure the pdata, destination address and data size and
Start DMA2D transfer with interrupt.
(+) Configure the source for foreground and background, destination address
and data size and Start MultiBuffer DMA2D transfer with interrupt.
(+) Abort DMA2D transfer.
(+) Suspend DMA2D transfer.
(+) Continue DMA2D transfer.
(+) Poll for transfer complete.
(+) handle DMA2D interrupt request.
@endverbatim
* @{
*/
/**
* @brief Start the DMA2D Transfer.
* @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
* the configuration information for the DMA2D.
* @param pdata: Configure the source memory Buffer address if
* the memory to memory or memory to memory with pixel format
* conversion DMA2D mode is selected, and configure
* the color value if register to memory DMA2D mode is selected.
* @param DstAddress: The destination memory Buffer address.
* @param Width: The width of data to be transferred from source to destination.
* @param Height: The height of data to be transferred from source to destination.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMA2D_Start(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Height)
{
/* Process locked */
__HAL_LOCK(hdma2d);
/* Change DMA2D peripheral state */
hdma2d->State = HAL_DMA2D_STATE_BUSY;
/* Check the parameters */
assert_param(IS_DMA2D_LINE(Height));
assert_param(IS_DMA2D_PIXEL(Width));
/* Disable the Peripheral */
__HAL_DMA2D_DISABLE(hdma2d);
/* Configure the source, destination address and the data size */
DMA2D_SetConfig(hdma2d, pdata, DstAddress, Width, Height);
/* Enable the Peripheral */
__HAL_DMA2D_ENABLE(hdma2d);
return HAL_OK;
}
/**
* @brief Start the DMA2D Transfer with interrupt enabled.
* @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
* the configuration information for the DMA2D.
* @param pdata: Configure the source memory Buffer address if
* the memory to memory or memory to memory with pixel format
* conversion DMA2D mode is selected, and configure
* the color value if register to memory DMA2D mode is selected.
* @param DstAddress: The destination memory Buffer address.
* @param Width: The width of data to be transferred from source to destination.
* @param Height: The height of data to be transferred from source to destination.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMA2D_Start_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Height)
{
/* Process locked */
__HAL_LOCK(hdma2d);
/* Change DMA2D peripheral state */
hdma2d->State = HAL_DMA2D_STATE_BUSY;
/* Check the parameters */
assert_param(IS_DMA2D_LINE(Height));
assert_param(IS_DMA2D_PIXEL(Width));
/* Disable the Peripheral */
__HAL_DMA2D_DISABLE(hdma2d);
/* Configure the source, destination address and the data size */
DMA2D_SetConfig(hdma2d, pdata, DstAddress, Width, Height);
/* Enable the transfer complete interrupt */
__HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_TC);
/* Enable the transfer Error interrupt */
__HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_TE);
/* Enable the Peripheral */
__HAL_DMA2D_ENABLE(hdma2d);
/* Enable the configuration error interrupt */
__HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_CE);
return HAL_OK;
}
/**
* @brief Start the multi-source DMA2D Transfer.
* @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
* the configuration information for the DMA2D.
* @param SrcAddress1: The source memory Buffer address of the foreground layer.
* @param SrcAddress2: The source memory Buffer address of the background layer.
* @param DstAddress: The destination memory Buffer address
* @param Width: The width of data to be transferred from source to destination.
* @param Height: The height of data to be transferred from source to destination.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMA2D_BlendingStart(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, uint32_t DstAddress, uint32_t Width, uint32_t Height)
{
/* Process locked */
__HAL_LOCK(hdma2d);
/* Change DMA2D peripheral state */
hdma2d->State = HAL_DMA2D_STATE_BUSY;
/* Check the parameters */
assert_param(IS_DMA2D_LINE(Height));
assert_param(IS_DMA2D_PIXEL(Width));
/* Disable the Peripheral */
__HAL_DMA2D_DISABLE(hdma2d);
/* Configure DMA2D Stream source2 address */
hdma2d->Instance->BGMAR = SrcAddress2;
/* Configure the source, destination address and the data size */
DMA2D_SetConfig(hdma2d, SrcAddress1, DstAddress, Width, Height);
/* Enable the Peripheral */
__HAL_DMA2D_ENABLE(hdma2d);
return HAL_OK;
}
/**
* @brief Start the multi-source DMA2D Transfer with interrupt enabled.
* @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
* the configuration information for the DMA2D.
* @param SrcAddress1: The source memory Buffer address of the foreground layer.
* @param SrcAddress2: The source memory Buffer address of the background layer.
* @param DstAddress: The destination memory Buffer address.
* @param Width: The width of data to be transferred from source to destination.
* @param Height: The height of data to be transferred from source to destination.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMA2D_BlendingStart_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, uint32_t DstAddress, uint32_t Width, uint32_t Height)
{
/* Process locked */
__HAL_LOCK(hdma2d);
/* Change DMA2D peripheral state */
hdma2d->State = HAL_DMA2D_STATE_BUSY;
/* Check the parameters */
assert_param(IS_DMA2D_LINE(Height));
assert_param(IS_DMA2D_PIXEL(Width));
/* Disable the Peripheral */
__HAL_DMA2D_DISABLE(hdma2d);
/* Configure DMA2D Stream source2 address */
hdma2d->Instance->BGMAR = SrcAddress2;
/* Configure the source, destination address and the data size */
DMA2D_SetConfig(hdma2d, SrcAddress1, DstAddress, Width, Height);
/* Enable the configuration error interrupt */
__HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_CE);
/* Enable the transfer complete interrupt */
__HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_TC);
/* Enable the transfer Error interrupt */
__HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_TE);
/* Enable the Peripheral */
__HAL_DMA2D_ENABLE(hdma2d);
return HAL_OK;
}
/**
* @brief Abort the DMA2D Transfer.
* @param hdma2d : pointer to a DMA2D_HandleTypeDef structure that contains
* the configuration information for the DMA2D.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMA2D_Abort(DMA2D_HandleTypeDef *hdma2d)
{
uint32_t tickstart = 0;
/* Disable the DMA2D */
__HAL_DMA2D_DISABLE(hdma2d);
/* Get tick */
tickstart = HAL_GetTick();
/* Check if the DMA2D is effectively disabled */
while((hdma2d->Instance->CR & DMA2D_CR_START) != 0)
{
if((HAL_GetTick() - tickstart ) > HAL_TIMEOUT_DMA2D_ABORT)
{
/* Update error code */
hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TIMEOUT;
/* Change the DMA2D state */
hdma2d->State= HAL_DMA2D_STATE_TIMEOUT;
/* Process Unlocked */
__HAL_UNLOCK(hdma2d);
return HAL_TIMEOUT;
}
}
/* Process Unlocked */
__HAL_UNLOCK(hdma2d);
/* Change the DMA2D state*/
hdma2d->State = HAL_DMA2D_STATE_READY;
return HAL_OK;
}
/**
* @brief Suspend the DMA2D Transfer.
* @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
* the configuration information for the DMA2D.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMA2D_Suspend(DMA2D_HandleTypeDef *hdma2d)
{
uint32_t tickstart = 0;
/* Suspend the DMA2D transfer */
hdma2d->Instance->CR |= DMA2D_CR_SUSP;
/* Get tick */
tickstart = HAL_GetTick();
/* Check if the DMA2D is effectively suspended */
while((hdma2d->Instance->CR & DMA2D_CR_SUSP) != DMA2D_CR_SUSP)
{
if((HAL_GetTick() - tickstart ) > HAL_TIMEOUT_DMA2D_SUSPEND)
{
/* Update error code */
hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TIMEOUT;
/* Change the DMA2D state */
hdma2d->State= HAL_DMA2D_STATE_TIMEOUT;
return HAL_TIMEOUT;
}
}
/* Change the DMA2D state*/
hdma2d->State = HAL_DMA2D_STATE_SUSPEND;
return HAL_OK;
}
/**
* @brief Resume the DMA2D Transfer.
* @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
* the configuration information for the DMA2D.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMA2D_Resume(DMA2D_HandleTypeDef *hdma2d)
{
/* Resume the DMA2D transfer */
hdma2d->Instance->CR &= ~DMA2D_CR_SUSP;
/* Change the DMA2D state*/
hdma2d->State = HAL_DMA2D_STATE_BUSY;
return HAL_OK;
}
/**
* @brief Polling for transfer complete or CLUT loading.
* @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
* the configuration information for the DMA2D.
* @param Timeout: Timeout duration
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMA2D_PollForTransfer(DMA2D_HandleTypeDef *hdma2d, uint32_t Timeout)
{
uint32_t tmp, tmp1;
uint32_t tickstart = 0;
/* Polling for DMA2D transfer */
if((hdma2d->Instance->CR & DMA2D_CR_START) != 0)
{
/* Get tick */
tickstart = HAL_GetTick();
while(__HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_TC) == RESET)
{
tmp = __HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_CE);
tmp1 = __HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_TE);
if((tmp != RESET) || (tmp1 != RESET))
{
/* Clear the transfer and configuration error flags */
__HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_CE);
__HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_TE);
/* Change DMA2D state */
hdma2d->State= HAL_DMA2D_STATE_ERROR;
/* Process unlocked */
__HAL_UNLOCK(hdma2d);
return HAL_ERROR;
}
/* Check for the Timeout */
if(Timeout != HAL_MAX_DELAY)
{
if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
{
/* Process unlocked */
__HAL_UNLOCK(hdma2d);
/* Update error code */
hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TIMEOUT;
/* Change the DMA2D state */
hdma2d->State= HAL_DMA2D_STATE_TIMEOUT;
return HAL_TIMEOUT;
}
}
}
}
/* Polling for CLUT loading */
if((hdma2d->Instance->FGPFCCR & DMA2D_FGPFCCR_START) != 0)
{
/* Get tick */
tickstart = HAL_GetTick();
while(__HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_CTC) == RESET)
{
if((__HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_CAE) != RESET))
{
/* Clear the transfer and configuration error flags */
__HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_CAE);
/* Change DMA2D state */
hdma2d->State= HAL_DMA2D_STATE_ERROR;
return HAL_ERROR;
}
/* Check for the Timeout */
if(Timeout != HAL_MAX_DELAY)
{
if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
{
/* Update error code */
hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TIMEOUT;
/* Change the DMA2D state */
hdma2d->State= HAL_DMA2D_STATE_TIMEOUT;
return HAL_TIMEOUT;
}
}
}
}
/* Clear the transfer complete flag */
__HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_TC);
/* Clear the CLUT loading flag */
__HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_CTC);
/* Change DMA2D state */
hdma2d->State = HAL_DMA2D_STATE_READY;
/* Process unlocked */
__HAL_UNLOCK(hdma2d);
return HAL_OK;
}
/**
* @brief Handles DMA2D interrupt request.
* @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
* the configuration information for the DMA2D.
* @retval HAL status
*/
void HAL_DMA2D_IRQHandler(DMA2D_HandleTypeDef *hdma2d)
{
/* Transfer Error Interrupt management ***************************************/
if(__HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_TE) != RESET)
{
if(__HAL_DMA2D_GET_IT_SOURCE(hdma2d, DMA2D_IT_TE) != RESET)
{
/* Disable the transfer Error interrupt */
__HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_TE);
/* Update error code */
hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TE;
/* Clear the transfer error flag */
__HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_TE);
/* Change DMA2D state */
hdma2d->State = HAL_DMA2D_STATE_ERROR;
/* Process Unlocked */
__HAL_UNLOCK(hdma2d);
if(hdma2d->XferErrorCallback != NULL)
{
/* Transfer error Callback */
hdma2d->XferErrorCallback(hdma2d);
}
}
}
/* Configuration Error Interrupt management **********************************/
if(__HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_CE) != RESET)
{
if(__HAL_DMA2D_GET_IT_SOURCE(hdma2d, DMA2D_IT_CE) != RESET)
{
/* Disable the Configuration Error interrupt */
__HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_CE);
/* Clear the Configuration error flag */
__HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_CE);
/* Update error code */
hdma2d->ErrorCode |= HAL_DMA2D_ERROR_CE;
/* Change DMA2D state */
hdma2d->State = HAL_DMA2D_STATE_ERROR;
/* Process Unlocked */
__HAL_UNLOCK(hdma2d);
if(hdma2d->XferErrorCallback != NULL)
{
/* Transfer error Callback */
hdma2d->XferErrorCallback(hdma2d);
}
}
}
/* Transfer Complete Interrupt management ************************************/
if(__HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_TC) != RESET)
{
if(__HAL_DMA2D_GET_IT_SOURCE(hdma2d, DMA2D_IT_TC) != RESET)
{
/* Disable the transfer complete interrupt */
__HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_TC);
/* Clear the transfer complete flag */
__HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_TC);
/* Update error code */
hdma2d->ErrorCode |= HAL_DMA2D_ERROR_NONE;
/* Change DMA2D state */
hdma2d->State = HAL_DMA2D_STATE_READY;
/* Process Unlocked */
__HAL_UNLOCK(hdma2d);
if(hdma2d->XferCpltCallback != NULL)
{
/* Transfer complete Callback */
hdma2d->XferCpltCallback(hdma2d);
}
}
}
}
/**
* @}
*/
/** @defgroup DMA2D_Group3 Peripheral Control functions
* @brief Peripheral Control functions
*
@verbatim
===============================================================================
##### Peripheral Control functions #####
===============================================================================
[..] This section provides functions allowing to:
(+) Configure the DMA2D foreground or/and background parameters.
(+) Configure the DMA2D CLUT transfer.
(+) Enable DMA2D CLUT.
(+) Disable DMA2D CLUT.
(+) Configure the line watermark
@endverbatim
* @{
*/
/**
* @brief Configure the DMA2D Layer according to the specified
* parameters in the DMA2D_InitTypeDef and create the associated handle.
* @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
* the configuration information for the DMA2D.
* @param LayerIdx: DMA2D Layer index.
* This parameter can be one of the following values:
* 0(background) / 1(foreground)
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMA2D_ConfigLayer(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx)
{
DMA2D_LayerCfgTypeDef *pLayerCfg = &hdma2d->LayerCfg[LayerIdx];
uint32_t tmp = 0;
/* Process locked */
__HAL_LOCK(hdma2d);
/* Change DMA2D peripheral state */
hdma2d->State = HAL_DMA2D_STATE_BUSY;
/* Check the parameters */
assert_param(IS_DMA2D_LAYER(LayerIdx));
assert_param(IS_DMA2D_OFFSET(pLayerCfg->InputOffset));
if(hdma2d->Init.Mode != DMA2D_R2M)
{
assert_param(IS_DMA2D_INPUT_COLOR_MODE(pLayerCfg->InputColorMode));
if(hdma2d->Init.Mode != DMA2D_M2M)
{
assert_param(IS_DMA2D_ALPHA_MODE(pLayerCfg->AlphaMode));
}
}
/* Configure the background DMA2D layer */
if(LayerIdx == 0)
{
/* DMA2D BGPFCR register configuration -----------------------------------*/
/* Get the BGPFCCR register value */
tmp = hdma2d->Instance->BGPFCCR;
/* Clear Input color mode, alpha value and alpha mode bits */
tmp &= (uint32_t)~(DMA2D_BGPFCCR_CM | DMA2D_BGPFCCR_AM | DMA2D_BGPFCCR_ALPHA);
if ((pLayerCfg->InputColorMode == CM_A4) || (pLayerCfg->InputColorMode == CM_A8))
{
/* Prepare the value to be wrote to the BGPFCCR register */
tmp |= (pLayerCfg->InputColorMode | (pLayerCfg->AlphaMode << 16) | ((pLayerCfg->InputAlpha) & 0xFF000000));
}
else
{
/* Prepare the value to be wrote to the BGPFCCR register */
tmp |= (pLayerCfg->InputColorMode | (pLayerCfg->AlphaMode << 16) | (pLayerCfg->InputAlpha << 24));
}
/* Write to DMA2D BGPFCCR register */
hdma2d->Instance->BGPFCCR = tmp;
/* DMA2D BGOR register configuration -------------------------------------*/
/* Get the BGOR register value */
tmp = hdma2d->Instance->BGOR;
/* Clear colors bits */
tmp &= (uint32_t)~DMA2D_BGOR_LO;
/* Prepare the value to be wrote to the BGOR register */
tmp |= pLayerCfg->InputOffset;
/* Write to DMA2D BGOR register */
hdma2d->Instance->BGOR = tmp;
if ((pLayerCfg->InputColorMode == CM_A4) || (pLayerCfg->InputColorMode == CM_A8))
{
/* Prepare the value to be wrote to the BGCOLR register */
tmp = ((pLayerCfg->InputAlpha) & 0x00FFFFFF);
/* Write to DMA2D BGCOLR register */
hdma2d->Instance->BGCOLR = tmp;
}
}
/* Configure the foreground DMA2D layer */
else
{
/* DMA2D FGPFCR register configuration -----------------------------------*/
/* Get the FGPFCCR register value */
tmp = hdma2d->Instance->FGPFCCR;
/* Clear Input color mode, alpha value and alpha mode bits */
tmp &= (uint32_t)~(DMA2D_FGPFCCR_CM | DMA2D_FGPFCCR_AM | DMA2D_FGPFCCR_ALPHA);
if ((pLayerCfg->InputColorMode == CM_A4) || (pLayerCfg->InputColorMode == CM_A8))
{
/* Prepare the value to be wrote to the FGPFCCR register */
tmp |= (pLayerCfg->InputColorMode | (pLayerCfg->AlphaMode << 16) | ((pLayerCfg->InputAlpha) & 0xFF000000));
}
else
{
/* Prepare the value to be wrote to the FGPFCCR register */
tmp |= (pLayerCfg->InputColorMode | (pLayerCfg->AlphaMode << 16) | (pLayerCfg->InputAlpha << 24));
}
/* Write to DMA2D FGPFCCR register */
hdma2d->Instance->FGPFCCR = tmp;
/* DMA2D FGOR register configuration -------------------------------------*/
/* Get the FGOR register value */
tmp = hdma2d->Instance->FGOR;
/* Clear colors bits */
tmp &= (uint32_t)~DMA2D_FGOR_LO;
/* Prepare the value to be wrote to the FGOR register */
tmp |= pLayerCfg->InputOffset;
/* Write to DMA2D FGOR register */
hdma2d->Instance->FGOR = tmp;
if ((pLayerCfg->InputColorMode == CM_A4) || (pLayerCfg->InputColorMode == CM_A8))
{
/* Prepare the value to be wrote to the FGCOLR register */
tmp = ((pLayerCfg->InputAlpha) & 0x00FFFFFF);
/* Write to DMA2D FGCOLR register */
hdma2d->Instance->FGCOLR = tmp;
}
}
/* Initialize the DMA2D state*/
hdma2d->State = HAL_DMA2D_STATE_READY;
/* Process unlocked */
__HAL_UNLOCK(hdma2d);
return HAL_OK;
}
/**
* @brief Configure the DMA2D CLUT Transfer.
* @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
* the configuration information for the DMA2D.
* @param CLUTCfg: pointer to a DMA2D_CLUTCfgTypeDef structure that contains
* the configuration information for the color look up table.
* @param LayerIdx: DMA2D Layer index.
* This parameter can be one of the following values:
* 0(background) / 1(foreground)
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMA2D_ConfigCLUT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx)
{
uint32_t tmp = 0, tmp1 = 0;
/* Check the parameters */
assert_param(IS_DMA2D_LAYER(LayerIdx));
assert_param(IS_DMA2D_CLUT_CM(CLUTCfg.CLUTColorMode));
assert_param(IS_DMA2D_CLUT_SIZE(CLUTCfg.Size));
/* Configure the CLUT of the background DMA2D layer */
if(LayerIdx == 0)
{
/* Get the BGCMAR register value */
tmp = hdma2d->Instance->BGCMAR;
/* Clear CLUT address bits */
tmp &= (uint32_t)~DMA2D_BGCMAR_MA;
/* Prepare the value to be wrote to the BGCMAR register */
tmp |= (uint32_t)CLUTCfg.pCLUT;
/* Write to DMA2D BGCMAR register */
hdma2d->Instance->BGCMAR = tmp;
/* Get the BGPFCCR register value */
tmp = hdma2d->Instance->BGPFCCR;
/* Clear CLUT size and CLUT address bits */
tmp &= (uint32_t)~(DMA2D_BGPFCCR_CS | DMA2D_BGPFCCR_CCM);
/* Get the CLUT size */
tmp1 = CLUTCfg.Size << 16;
/* Prepare the value to be wrote to the BGPFCCR register */
tmp |= (CLUTCfg.CLUTColorMode | tmp1);
/* Write to DMA2D BGPFCCR register */
hdma2d->Instance->BGPFCCR = tmp;
}
/* Configure the CLUT of the foreground DMA2D layer */
else
{
/* Get the FGCMAR register value */
tmp = hdma2d->Instance->FGCMAR;
/* Clear CLUT address bits */
tmp &= (uint32_t)~DMA2D_FGCMAR_MA;
/* Prepare the value to be wrote to the FGCMAR register */
tmp |= (uint32_t)CLUTCfg.pCLUT;
/* Write to DMA2D FGCMAR register */
hdma2d->Instance->FGCMAR = tmp;
/* Get the FGPFCCR register value */
tmp = hdma2d->Instance->FGPFCCR;
/* Clear CLUT size and CLUT address bits */
tmp &= (uint32_t)~(DMA2D_FGPFCCR_CS | DMA2D_FGPFCCR_CCM);
/* Get the CLUT size */
tmp1 = CLUTCfg.Size << 8;
/* Prepare the value to be wrote to the FGPFCCR register */
tmp |= (CLUTCfg.CLUTColorMode | tmp1);
/* Write to DMA2D FGPFCCR register */
hdma2d->Instance->FGPFCCR = tmp;
}
return HAL_OK;
}
/**
* @brief Enable the DMA2D CLUT Transfer.
* @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
* the configuration information for the DMA2D.
* @param LayerIdx: DMA2D Layer index.
* This parameter can be one of the following values:
* 0(background) / 1(foreground)
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMA2D_EnableCLUT(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx)
{
/* Check the parameters */
assert_param(IS_DMA2D_LAYER(LayerIdx));
if(LayerIdx == 0)
{
/* Enable the CLUT loading for the background */
hdma2d->Instance->BGPFCCR |= DMA2D_BGPFCCR_START;
}
else
{
/* Enable the CLUT loading for the foreground */
hdma2d->Instance->FGPFCCR |= DMA2D_FGPFCCR_START;
}
return HAL_OK;
}
/**
* @brief Disable the DMA2D CLUT Transfer.
* @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
* the configuration information for the DMA2D.
* @param LayerIdx: DMA2D Layer index.
* This parameter can be one of the following values:
* 0(background) / 1(foreground)
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMA2D_DisableCLUT(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx)
{
/* Check the parameters */
assert_param(IS_DMA2D_LAYER(LayerIdx));
if(LayerIdx == 0)
{
/* Disable the CLUT loading for the background */
hdma2d->Instance->BGPFCCR &= ~DMA2D_BGPFCCR_START;
}
else
{
/* Disable the CLUT loading for the foreground */
hdma2d->Instance->FGPFCCR &= ~DMA2D_FGPFCCR_START;
}
return HAL_OK;
}
/**
* @brief Define the configuration of the line watermark .
* @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
* the configuration information for the DMA2D.
* @param Line: Line Watermark configuration.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMA2D_ProgramLineEvent(DMA2D_HandleTypeDef *hdma2d, uint32_t Line)
{
/* Process locked */
__HAL_LOCK(hdma2d);
/* Change DMA2D peripheral state */
hdma2d->State = HAL_DMA2D_STATE_BUSY;
/* Check the parameters */
assert_param(IS_DMA2D_LineWatermark(Line));
/* Sets the Line watermark configuration */
DMA2D->LWR = (uint32_t)Line;
/* Initialize the DMA2D state*/
hdma2d->State = HAL_DMA2D_STATE_READY;
/* Process unlocked */
__HAL_UNLOCK(hdma2d);
return HAL_OK;
}
/**
* @}
*/
/** @defgroup DMA2D_Group4 Peripheral State functions
* @brief Peripheral State functions
*
@verbatim
===============================================================================
##### Peripheral State and Errors functions #####
===============================================================================
[..]
This subsection provides functions allowing to :
(+) Check the DMA2D state
(+) Get error code
@endverbatim
* @{
*/
/**
* @brief Return the DMA2D state
* @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
* the configuration information for the DMA2D.
* @retval HAL state
*/
HAL_DMA2D_StateTypeDef HAL_DMA2D_GetState(DMA2D_HandleTypeDef *hdma2d)
{
return hdma2d->State;
}
/**
* @brief Return the DMA2D error code
* @param hdma2d : pointer to a DMA2D_HandleTypeDef structure that contains
* the configuration information for DMA2D.
* @retval DMA2D Error Code
*/
uint32_t HAL_DMA2D_GetError(DMA2D_HandleTypeDef *hdma2d)
{
return hdma2d->ErrorCode;
}
/**
* @}
*/
/**
* @brief Set the DMA2D Transfer parameter.
* @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
* the configuration information for the specified DMA2D.
* @param pdata: The source memory Buffer address
* @param DstAddress: The destination memory Buffer address
* @param Width: The width of data to be transferred from source to destination.
* @param Height: The height of data to be transferred from source to destination.
* @retval HAL status
*/
static void DMA2D_SetConfig(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Height)
{
uint32_t tmp = 0;
uint32_t tmp1 = 0;
uint32_t tmp2 = 0;
uint32_t tmp3 = 0;
uint32_t tmp4 = 0;
tmp = Width << 16;
/* Configure DMA2D data size */
hdma2d->Instance->NLR = (Height | tmp);
/* Configure DMA2D destination address */
hdma2d->Instance->OMAR = DstAddress;
/* Register to memory DMA2D mode selected */
if (hdma2d->Init.Mode == DMA2D_R2M)
{
tmp1 = pdata & DMA2D_OCOLR_ALPHA_1;
tmp2 = pdata & DMA2D_OCOLR_RED_1;
tmp3 = pdata & DMA2D_OCOLR_GREEN_1;
tmp4 = pdata & DMA2D_OCOLR_BLUE_1;
/* Prepare the value to be wrote to the OCOLR register according to the color mode */
if (hdma2d->Init.ColorMode == DMA2D_ARGB8888)
{
tmp = (tmp3 | tmp2 | tmp1| tmp4);
}
else if (hdma2d->Init.ColorMode == DMA2D_RGB888)
{
tmp = (tmp3 | tmp2 | tmp4);
}
else if (hdma2d->Init.ColorMode == DMA2D_RGB565)
{
tmp2 = (tmp2 >> 19);
tmp3 = (tmp3 >> 10);
tmp4 = (tmp4 >> 3 );
tmp = ((tmp3 << 5) | (tmp2 << 11) | tmp4);
}
else if (hdma2d->Init.ColorMode == DMA2D_ARGB1555)
{
tmp1 = (tmp1 >> 31);
tmp2 = (tmp2 >> 19);
tmp3 = (tmp3 >> 11);
tmp4 = (tmp4 >> 3 );
tmp = ((tmp3 << 5) | (tmp2 << 10) | (tmp1 << 15) | tmp4);
}
else /* DMA2D_CMode = DMA2D_ARGB4444 */
{
tmp1 = (tmp1 >> 28);
tmp2 = (tmp2 >> 20);
tmp3 = (tmp3 >> 12);
tmp4 = (tmp4 >> 4 );
tmp = ((tmp3 << 4) | (tmp2 << 8) | (tmp1 << 12) | tmp4);
}
/* Write to DMA2D OCOLR register */
hdma2d->Instance->OCOLR = tmp;
}
else /* M2M, M2M_PFC or M2M_Blending DMA2D Mode */
{
/* Configure DMA2D source address */
hdma2d->Instance->FGMAR = pdata;
}
}
/**
* @}
*/
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
#endif /* HAL_DMA2D_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
