/**
******************************************************************************
* @file stm32f4xx_hal_fmpi2c.h
* @author MCD Application Team
* @version V1.3.2
* @date 26-June-2015
* @brief Header file of FMPI2C HAL module.
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_HAL_FMPI2C_H
#define __STM32F4xx_HAL_FMPI2C_H
#ifdef __cplusplus
extern "C" {
#endif
#if defined(STM32F446xx)
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal_def.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @addtogroup FMPI2C
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup FMPI2C_Exported_Types FMPI2C Exported Types
* @{
*/
/**
* @brief FMPI2C Configuration Structure definition
*/
typedef struct
{
uint32_t Timing; /*!< Specifies the FMPI2C_TIMINGR_register value.
This parameter calculated by referring to FMPI2C initialization
section in Reference manual */
uint32_t OwnAddress1; /*!< Specifies the first device own address.
This parameter can be a 7-bit or 10-bit address. */
uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected.
This parameter can be a value of @ref FMPI2C_addressing_mode */
uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected.
This parameter can be a value of @ref FMPI2C_dual_addressing_mode */
uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected
This parameter can be a 7-bit address. */
uint32_t OwnAddress2Masks; /*!< Specifies the acknoledge mask address second device own address if dual addressing mode is selected
This parameter can be a value of @ref FMPI2C_own_address2_masks */
uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected.
This parameter can be a value of @ref FMPI2C_general_call_addressing_mode */
uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected.
This parameter can be a value of @ref FMPI2C_nostretch_mode */
}FMPI2C_InitTypeDef;
/**
* @brief HAL State structures definition
*/
typedef enum
{
HAL_FMPI2C_STATE_RESET = 0x00, /*!< FMPI2C not yet initialized or disabled */
HAL_FMPI2C_STATE_READY = 0x01, /*!< FMPI2C initialized and ready for use */
HAL_FMPI2C_STATE_BUSY = 0x02, /*!< FMPI2C internal process is ongoing */
HAL_FMPI2C_STATE_MASTER_BUSY_TX = 0x12, /*!< Master Data Transmission process is ongoing */
HAL_FMPI2C_STATE_MASTER_BUSY_RX = 0x22, /*!< Master Data Reception process is ongoing */
HAL_FMPI2C_STATE_SLAVE_BUSY_TX = 0x32, /*!< Slave Data Transmission process is ongoing */
HAL_FMPI2C_STATE_SLAVE_BUSY_RX = 0x42, /*!< Slave Data Reception process is ongoing */
HAL_FMPI2C_STATE_MEM_BUSY_TX = 0x52, /*!< Memory Data Transmission process is ongoing */
HAL_FMPI2C_STATE_MEM_BUSY_RX = 0x62, /*!< Memory Data Reception process is ongoing */
HAL_FMPI2C_STATE_TIMEOUT = 0x03, /*!< Timeout state */
HAL_FMPI2C_STATE_ERROR = 0x04 /*!< Reception process is ongoing */
}HAL_FMPI2C_StateTypeDef;
/**
* @brief HAL FMPI2C Error Code structure definition
*/
typedef enum
{
HAL_FMPI2C_ERROR_NONE = 0x00, /*!< No error */
HAL_FMPI2C_ERROR_BERR = 0x01, /*!< BERR error */
HAL_FMPI2C_ERROR_ARLO = 0x02, /*!< ARLO error */
HAL_FMPI2C_ERROR_AF = 0x04, /*!< ACKF error */
HAL_FMPI2C_ERROR_OVR = 0x08, /*!< OVR error */
HAL_FMPI2C_ERROR_DMA = 0x10, /*!< DMA transfer error */
HAL_FMPI2C_ERROR_TIMEOUT = 0x20, /*!< Timeout error */
HAL_FMPI2C_ERROR_SIZE = 0x40 /*!< Size Management error */
}HAL_FMPI2C_ErrorTypeDef;
/**
* @brief FMPI2C handle Structure definition
*/
typedef struct
{
FMPI2C_TypeDef *Instance; /*!< FMPI2C registers base address */
FMPI2C_InitTypeDef Init; /*!< FMPI2C communication parameters */
uint8_t *pBuffPtr; /*!< Pointer to FMPI2C transfer buffer */
uint16_t XferSize; /*!< FMPI2C transfer size */
__IO uint16_t XferCount; /*!< FMPI2C transfer counter */
DMA_HandleTypeDef *hdmatx; /*!< FMPI2C Tx DMA handle parameters */
DMA_HandleTypeDef *hdmarx; /*!< FMPI2C Rx DMA handle parameters */
HAL_LockTypeDef Lock; /*!< FMPI2C locking object */
__IO HAL_FMPI2C_StateTypeDef State; /*!< FMPI2C communication state */
__IO HAL_FMPI2C_ErrorTypeDef ErrorCode; /* FMPI2C Error code */
}FMPI2C_HandleTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup FMPI2C_Exported_Constants FMPI2C Exported Constants
* @{
*/
/** @defgroup FMPI2C_addressing_mode FMPI2C addressing mode
* @{
*/
#define FMPI2C_ADDRESSINGMODE_7BIT ((uint32_t)0x00000001)
#define FMPI2C_ADDRESSINGMODE_10BIT ((uint32_t)0x00000002)
/**
* @}
*/
/** @defgroup FMPI2C_dual_addressing_mode FMPI2C dual addressing mode
* @{
*/
#define FMPI2C_DUALADDRESS_DISABLE ((uint32_t)0x00000000)
#define FMPI2C_DUALADDRESS_ENABLE FMPI2C_OAR2_OA2EN
/**
* @}
*/
/** @defgroup FMPI2C_own_address2_masks FMPI2C own address2 masks
* @{
*/
#define FMPI2C_OA2_NOMASK ((uint8_t)0x00)
#define FMPI2C_OA2_MASK01 ((uint8_t)0x01)
#define FMPI2C_OA2_MASK02 ((uint8_t)0x02)
#define FMPI2C_OA2_MASK03 ((uint8_t)0x03)
#define FMPI2C_OA2_MASK04 ((uint8_t)0x04)
#define FMPI2C_OA2_MASK05 ((uint8_t)0x05)
#define FMPI2C_OA2_MASK06 ((uint8_t)0x06)
#define FMPI2C_OA2_MASK07 ((uint8_t)0x07)
/**
* @}
*/
/** @defgroup FMPI2C_general_call_addressing_mode FMPI2C general call addressing mode
* @{
*/
#define FMPI2C_GENERALCALL_DISABLE ((uint32_t)0x00000000)
#define FMPI2C_GENERALCALL_ENABLE FMPI2C_CR1_GCEN
/**
* @}
*/
/** @defgroup FMPI2C_nostretch_mode FMPI2C nostretch mode
* @{
*/
#define FMPI2C_NOSTRETCH_DISABLE ((uint32_t)0x00000000)
#define FMPI2C_NOSTRETCH_ENABLE FMPI2C_CR1_NOSTRETCH
/**
* @}
*/
/** @defgroup FMPI2C_Memory_Address_Size FMPI2C Memory Address Size
* @{
*/
#define FMPI2C_MEMADD_SIZE_8BIT ((uint32_t)0x00000001)
#define FMPI2C_MEMADD_SIZE_16BIT ((uint32_t)0x00000002)
/**
* @}
*/
/** @defgroup FMPI2C_ReloadEndMode_definition FMPI2C ReloadEndMode definition
* @{
*/
#define FMPI2C_RELOAD_MODE FMPI2C_CR2_RELOAD
#define FMPI2C_AUTOEND_MODE FMPI2C_CR2_AUTOEND
#define FMPI2C_SOFTEND_MODE ((uint32_t)0x00000000)
/**
* @}
*/
/** @defgroup FMPI2C_StartStopMode_definition FMPI2C StartStopMode definition
* @{
*/
#define FMPI2C_NO_STARTSTOP ((uint32_t)0x00000000)
#define FMPI2C_GENERATE_STOP FMPI2C_CR2_STOP
#define FMPI2C_GENERATE_START_READ (uint32_t)(FMPI2C_CR2_START | FMPI2C_CR2_RD_WRN)
#define FMPI2C_GENERATE_START_WRITE FMPI2C_CR2_START
/**
* @}
*/
/** @defgroup FMPI2C_Interrupt_configuration_definition FMPI2C Interrupt configuration definition
* @brief FMPI2C Interrupt definition
* Elements values convention: 0xXXXXXXXX
* - XXXXXXXX : Interrupt control mask
* @{
*/
#define FMPI2C_IT_ERRI FMPI2C_CR1_ERRIE
#define FMPI2C_IT_TCI FMPI2C_CR1_TCIE
#define FMPI2C_IT_STOPI FMPI2C_CR1_STOPIE
#define FMPI2C_IT_NACKI FMPI2C_CR1_NACKIE
#define FMPI2C_IT_ADDRI FMPI2C_CR1_ADDRIE
#define FMPI2C_IT_RXI FMPI2C_CR1_RXIE
#define FMPI2C_IT_TXI FMPI2C_CR1_TXIE
/**
* @}
*/
/** @defgroup FMPI2C_Flag_definition FMPI2C Flag definition
* @{
*/
#define FMPI2C_FLAG_TXE FMPI2C_ISR_TXE
#define FMPI2C_FLAG_TXIS FMPI2C_ISR_TXIS
#define FMPI2C_FLAG_RXNE FMPI2C_ISR_RXNE
#define FMPI2C_FLAG_ADDR FMPI2C_ISR_ADDR
#define FMPI2C_FLAG_AF FMPI2C_ISR_NACKF
#define FMPI2C_FLAG_STOPF FMPI2C_ISR_STOPF
#define FMPI2C_FLAG_TC FMPI2C_ISR_TC
#define FMPI2C_FLAG_TCR FMPI2C_ISR_TCR
#define FMPI2C_FLAG_BERR FMPI2C_ISR_BERR
#define FMPI2C_FLAG_ARLO FMPI2C_ISR_ARLO
#define FMPI2C_FLAG_OVR FMPI2C_ISR_OVR
#define FMPI2C_FLAG_PECERR FMPI2C_ISR_PECERR
#define FMPI2C_FLAG_TIMEOUT FMPI2C_ISR_TIMEOUT
#define FMPI2C_FLAG_ALERT FMPI2C_ISR_ALERT
#define FMPI2C_FLAG_BUSY FMPI2C_ISR_BUSY
#define FMPI2C_FLAG_DIR FMPI2C_ISR_DIR
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup FMPI2C_Exported_Macros FMPI2C Exported Macros
* @{
*/
/** @brief Reset FMPI2C handle state
* @param __HANDLE__: specifies the FMPI2C Handle.
* This parameter can be FMPI2C where x: 1 or 2 to select the FMPI2C peripheral.
* @retval None
*/
#define __HAL_FMPI2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_FMPI2C_STATE_RESET)
/** @brief Enables or disables the specified FMPI2C interrupts.
* @param __HANDLE__: specifies the FMPI2C Handle.
* This parameter can be FMPI2C where x: 1 or 2 to select the FMPI2C peripheral.
* @param __INTERRUPT__: specifies the interrupt source to enable or disable.
* This parameter can be one of the following values:
* @arg FMPI2C_IT_ERRI: Errors interrupt enable
* @arg FMPI2C_IT_TCI: Transfer complete interrupt enable
* @arg FMPI2C_IT_STOPI: STOP detection interrupt enable
* @arg FMPI2C_IT_NACKI: NACK received interrupt enable
* @arg FMPI2C_IT_ADDRI: Address match interrupt enable
* @arg FMPI2C_IT_RXI: RX interrupt enable
* @arg FMPI2C_IT_TXI: TX interrupt enable
*
* @retval None
*/
#define __HAL_FMPI2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__))
#define __HAL_FMPI2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__)))
/** @brief Checks if the specified FMPI2C interrupt source is enabled or disabled.
* @param __HANDLE__: specifies the FMPI2C Handle.
* This parameter can be FMPI2C where x: 1 or 2 to select the FMPI2C peripheral.
* @param __INTERRUPT__: specifies the FMPI2C interrupt source to check.
* This parameter can be one of the following values:
* @arg FMPI2C_IT_ERRI: Errors interrupt enable
* @arg FMPI2C_IT_TCI: Transfer complete interrupt enable
* @arg FMPI2C_IT_STOPI: STOP detection interrupt enable
* @arg FMPI2C_IT_NACKI: NACK received interrupt enable
* @arg FMPI2C_IT_ADDRI: Address match interrupt enable
* @arg FMPI2C_IT_RXI: RX interrupt enable
* @arg FMPI2C_IT_TXI: TX interrupt enable
*
* @retval The new state of __IT__ (TRUE or FALSE).
*/
#define __HAL_FMPI2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
/** @brief Checks whether the specified FMPI2C flag is set or not.
* @param __HANDLE__: specifies the FMPI2C Handle.
* This parameter can be FMPI2C where x: 1 or 2 to select the FMPI2C peripheral.
* @param __FLAG__: specifies the flag to check.
* This parameter can be one of the following values:
* @arg FMPI2C_FLAG_TXE: Transmit data register empty
* @arg FMPI2C_FLAG_TXIS: Transmit interrupt status
* @arg FMPI2C_FLAG_RXNE: Receive data register not empty
* @arg FMPI2C_FLAG_ADDR: Address matched (slave mode)
* @arg FMPI2C_FLAG_AF: Acknowledge failure received flag
* @arg FMPI2C_FLAG_STOPF: STOP detection flag
* @arg FMPI2C_FLAG_TC: Transfer complete (master mode)
* @arg FMPI2C_FLAG_TCR: Transfer complete reload
* @arg FMPI2C_FLAG_BERR: Bus error
* @arg FMPI2C_FLAG_ARLO: Arbitration lost
* @arg FMPI2C_FLAG_OVR: Overrun/Underrun
* @arg FMPI2C_FLAG_PECERR: PEC error in reception
* @arg FMPI2C_FLAG_TIMEOUT: Timeout or Tlow detection flag
* @arg FMPI2C_FLAG_ALERT: SMBus alert
* @arg FMPI2C_FLAG_BUSY: Bus busy
* @arg FMPI2C_FLAG_DIR: Transfer direction (slave mode)
*
* @retval The new state of __FLAG__ (TRUE or FALSE).
*/
#define __HAL_FMPI2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__) & FMPI2C_FLAG_MASK)) == ((__FLAG__) & FMPI2C_FLAG_MASK)))
/** @brief Clears the FMPI2C pending flags which are cleared by writing 1 in a specific bit.
* @param __HANDLE__: specifies the FMPI2C Handle.
* This parameter can be FMPI2C where x: 1 or 2 to select the FMPI2C peripheral.
* @param __FLAG__: specifies the flag to clear.
* This parameter can be any combination of the following values:
* @arg FMPI2C_FLAG_ADDR: Address matched (slave mode)
* @arg FMPI2C_FLAG_AF: Acknowledge failure received flag
* @arg FMPI2C_FLAG_STOPF: STOP detection flag
* @arg FMPI2C_FLAG_BERR: Bus error
* @arg FMPI2C_FLAG_ARLO: Arbitration lost
* @arg FMPI2C_FLAG_OVR: Overrun/Underrun
* @arg FMPI2C_FLAG_PECERR: PEC error in reception
* @arg FMPI2C_FLAG_TIMEOUT: Timeout or Tlow detection flag
* @arg FMPI2C_FLAG_ALERT: SMBus alert
*
* @retval None
*/
#define __HAL_FMPI2C_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = ((__FLAG__) & FMPI2C_FLAG_MASK))
#define __HAL_FMPI2C_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= FMPI2C_CR1_PE)
#define __HAL_FMPI2C_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~FMPI2C_CR1_PE)
#define __HAL_FMPI2C_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= (uint32_t)~((uint32_t)(FMPI2C_CR2_SADD | FMPI2C_CR2_HEAD10R | FMPI2C_CR2_NBYTES | FMPI2C_CR2_RELOAD | FMPI2C_CR2_RD_WRN)))
#define __HAL_FMPI2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0xFF00))) >> 8)))
#define __HAL_FMPI2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FF))))
#define __HAL_FMPI2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == FMPI2C_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (FMPI2C_CR2_SADD)) | (FMPI2C_CR2_START) | (FMPI2C_CR2_AUTOEND)) & (~FMPI2C_CR2_RD_WRN)) : \
(uint32_t)((((uint32_t)(__ADDRESS__) & (FMPI2C_CR2_SADD)) | (FMPI2C_CR2_ADD10) | (FMPI2C_CR2_START)) & (~FMPI2C_CR2_RD_WRN)))
#define IS_FMPI2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= (uint32_t)0x000003FF)
#define IS_FMPI2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FF)
/**
* @}
*/
/* Include FMPI2C HAL Extension module */
#include "stm32f4xx_hal_fmpi2c_ex.h"
/* Exported functions --------------------------------------------------------*/
/** @addtogroup FMPI2C_Exported_Functions
* @{
*/
/** @addtogroup FMPI2C_Exported_Functions_Group1
* @{
*/
/* Initialization/de-initialization functions**********************************/
HAL_StatusTypeDef HAL_FMPI2C_Init(FMPI2C_HandleTypeDef *hFMPI2C);
HAL_StatusTypeDef HAL_FMPI2C_DeInit (FMPI2C_HandleTypeDef *hFMPI2C);
void HAL_FMPI2C_MspInit(FMPI2C_HandleTypeDef *hFMPI2C);
void HAL_FMPI2C_MspDeInit(FMPI2C_HandleTypeDef *hFMPI2C);
/**
* @}
*/
/** @addtogroup FMPI2C_Exported_Functions_Group2
* @{
*/
/* I/O operation functions ***************************************************/
/******* Blocking mode: Polling */
HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_FMPI2C_Master_Receive(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit(FMPI2C_HandleTypeDef *hFMPI2C, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive(FMPI2C_HandleTypeDef *hFMPI2C, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_FMPI2C_Mem_Write(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_FMPI2C_Mem_Read(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_FMPI2C_IsDeviceReady(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
/******* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit_IT(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_FMPI2C_Master_Receive_IT(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit_IT(FMPI2C_HandleTypeDef *hFMPI2C, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive_IT(FMPI2C_HandleTypeDef *hFMPI2C, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_FMPI2C_Mem_Write_IT(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_FMPI2C_Mem_Read_IT(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
/******* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit_DMA(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_FMPI2C_Master_Receive_DMA(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit_DMA(FMPI2C_HandleTypeDef *hFMPI2C, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive_DMA(FMPI2C_HandleTypeDef *hFMPI2C, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_FMPI2C_Mem_Write_DMA(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_FMPI2C_Mem_Read_DMA(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
/******* FMPI2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
void HAL_FMPI2C_EV_IRQHandler(FMPI2C_HandleTypeDef *hFMPI2C);
void HAL_FMPI2C_ER_IRQHandler(FMPI2C_HandleTypeDef *hFMPI2C);
void HAL_FMPI2C_MasterTxCpltCallback(FMPI2C_HandleTypeDef *hFMPI2C);
void HAL_FMPI2C_MasterRxCpltCallback(FMPI2C_HandleTypeDef *hFMPI2C);
void HAL_FMPI2C_SlaveTxCpltCallback(FMPI2C_HandleTypeDef *hFMPI2C);
void HAL_FMPI2C_SlaveRxCpltCallback(FMPI2C_HandleTypeDef *hFMPI2C);
void HAL_FMPI2C_MemTxCpltCallback(FMPI2C_HandleTypeDef *hFMPI2C);
void HAL_FMPI2C_MemRxCpltCallback(FMPI2C_HandleTypeDef *hFMPI2C);
void HAL_FMPI2C_ErrorCallback(FMPI2C_HandleTypeDef *hFMPI2C);
/**
* @}
*/
/** @addtogroup FMPI2C_Exported_Functions_Group3
* @{
*/
/* Peripheral State functions ************************************************/
HAL_FMPI2C_StateTypeDef HAL_FMPI2C_GetState(FMPI2C_HandleTypeDef *hFMPI2C);
uint32_t HAL_FMPI2C_GetError(FMPI2C_HandleTypeDef *hFMPI2C);
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup FMPI2C_Private_Constants FMPI2C Private Constants
* @{
*/
#define FMPI2C_FLAG_MASK ((uint32_t)0x0001FFFF)
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup FMPI2C_Private_Macros FMPI2C Private Macros
* @{
*/
#define IS_FMPI2C_ADDRESSING_MODE(MODE) (((MODE) == FMPI2C_ADDRESSINGMODE_7BIT) || \
((MODE) == FMPI2C_ADDRESSINGMODE_10BIT))
#define IS_FMPI2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == FMPI2C_DUALADDRESS_DISABLE) || \
((ADDRESS) == FMPI2C_DUALADDRESS_ENABLE))
#define IS_FMPI2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == FMPI2C_OA2_NOMASK) || \
((MASK) == FMPI2C_OA2_MASK01) || \
((MASK) == FMPI2C_OA2_MASK02) || \
((MASK) == FMPI2C_OA2_MASK03) || \
((MASK) == FMPI2C_OA2_MASK04) || \
((MASK) == FMPI2C_OA2_MASK05) || \
((MASK) == FMPI2C_OA2_MASK06) || \
((MASK) == FMPI2C_OA2_MASK07))
#define IS_FMPI2C_GENERAL_CALL(CALL) (((CALL) == FMPI2C_GENERALCALL_DISABLE) || \
((CALL) == FMPI2C_GENERALCALL_ENABLE))
#define IS_FMPI2C_NO_STRETCH(STRETCH) (((STRETCH) == FMPI2C_NOSTRETCH_DISABLE) || \
((STRETCH) == FMPI2C_NOSTRETCH_ENABLE))
#define IS_FMPI2C_MEMADD_SIZE(SIZE) (((SIZE) == FMPI2C_MEMADD_SIZE_8BIT) || \
((SIZE) == FMPI2C_MEMADD_SIZE_16BIT))
#define IS_TRANSFER_MODE(MODE) (((MODE) == FMPI2C_RELOAD_MODE) || \
((MODE) == FMPI2C_AUTOEND_MODE) || \
((MODE) == FMPI2C_SOFTEND_MODE))
#define IS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == FMPI2C_GENERATE_STOP) || \
((REQUEST) == FMPI2C_GENERATE_START_READ) || \
((REQUEST) == FMPI2C_GENERATE_START_WRITE) || \
((REQUEST) == FMPI2C_NO_STARTSTOP))
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup FMPI2C_Private_Functions FMPI2C Private Functions
* @brief FMPI2C private functions
* @{
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif /* STM32F446xx */
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_HAL_FMPI2C_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
