core/util/keywrap - AES KEY WRAP as defined in RFC 3394

Age	Commit message (Collapse)	Author
2018-12-07	Solved event loop.	Joachim Strömbergson

2018-11-27	Adding test that tries to write a key into the serial memory.	Joachim Strömbergson

2018-11-27	Adding check that correct status word was written into the serial memory.	Joachim Strömbergson

2018-11-23	Added ability observe mkmif state. Realized that the write operation handler ↵	Joachim Strömbergson
	was under read operation handling. Fixed this and now status write works. We can observe 0xdeadbeef in the memory after status write operation.
2018-11-23	Updated display of states. We can now observe correct init of the memory.	Joachim Strömbergson

2018-11-23	Adding task to dump parts of the contents of the serial memory.	Joachim Strömbergson

2018-11-23	Added observation of mem internal control states.	Joachim Strömbergson

2018-11-23	Enabled spi observation and can see that SPI interface is alive when pulling ↵	Joachim Strömbergson
	init.
2018-11-23	Adding test case for mem init. Removing auto-load test case since the dut ↵	Joachim Strömbergson
	does not support auto load. Updating the write status test case to use wait_ready() for dut status.
2018-11-22	Adding outputs to observe dut API. Adding support in Makefile for using the ↵	Joachim Strömbergson
	vendor supplied memory model.
2018-11-13	Adding README that describes the purpose of the dir and how to get the ↵	Joachim Strömbergson
	vendor specific memory model we need here.
2018-11-06	Fixed incorrect address used for the key. Added testcase to verify reading ↵	Joachim Strömbergson
	of status word.
2018-11-06	Trigger read operation when we should read.	Joachim Strömbergson

2018-11-06	Adding test case to observe auto-load of key and status after reset.	Joachim Strömbergson

2018-10-30	Integrated the DUT into the testbench and update Makefile to build the sim ↵	Joachim Strömbergson
	target-
2018-10-23	Hardened the keywrap API to not allow reads or writes when the core is busy.	Joachim Strömbergson

2018-09-28	Adding initial version of testbench for the mkmif wrapper.	Joachim Strömbergson

2018-09-28	Completed syntax debug after integration of new mkmif_core wrapper.	Joachim Strömbergson

2018-09-28	Integrated new mkmif_core wrapper.	Joachim Strömbergson

2018-09-28	Some whitespace cleanup.	Joachim Strömbergson

2018-09-28	Completed the functionality that should be in the wrapper. Now its just ↵	Joachim Strömbergson
	debugging...
2018-09-28	Got all states needed. Added hold registers for address and data to be written.	Joachim Strömbergson

2018-09-28	Adding initial version of mkmif wrapper used by keywrap_core to hide ↵	Joachim Strömbergson
	protocol complexity.
2018-09-25	Added logic to perform status word read operation from the mkm. Adding ↵	Joachim Strömbergson
	interfaces and registers to be able to pass mkm status to host. Updated dut instantiation in core testbench to.
2018-09-25	Updated the keywrap API to support access to MKM status. Updated ↵	Joachim Strömbergson
	keywrap_core to support control of MKM access operations.
2018-09-25	Increased control state space to make room for read and write operations.	Joachim Strömbergson

2018-09-25	Integrate the mkmif_core instead of the mkmif wrapper.	Joachim Strömbergson

2018-09-21	Adding more infrastructure needed for the integrated mkm.	Joachim Strömbergson

2018-09-18	Adding more functionality needed for the mkm integration.	Joachim Strömbergson

2018-09-18	Increasing control state reg to support more states. Adding first states for ↵	Joachim Strömbergson
	read and write key handling.
2018-09-18	Adding API control bits to read and write key.	Joachim Strömbergson

2018-09-18	Moved compile time debug access control of key to the API. Added correct ↵	Joachim Strömbergson
	code to mux key.
2018-09-18	Moved the mkmif instance into the core itself. Added API to read the key if ↵	Joachim Strömbergson
	DEBUG is set.
2018-09-14	Adding instatiation of the mkmif in the keywrap top level wrapper. Updated ↵	Joachim Strömbergson
	testbench anf Makefile to build with instantiated mkmif. The mkmif is not yet used by the keywrap.
2018-09-11	Adding a huge, self testing test case.	Joachim Strömbergson

2018-09-07	Updated testbench to use the new API. Verified that the new API works. No ↵	Joachim Strömbergson
	more banks.
2018-09-07	Removed r_bank from dump since it no longer exists.	Joachim Strömbergson

2018-09-07	Test write to all positions in the mem.	Joachim Strömbergson

2018-09-04	Updated rtl and tb to support parameterized memory size.	Joachim Strömbergson

2018-09-04	Updated testbench to handle parameterized core.	Joachim Strömbergson

2018-09-04	Updated testbench to work with the parameterized memory.	Joachim Strömbergson

2018-08-24	We probably want to be able to read data too.	Joachim Strömbergson

2018-08-24	Killed the bank switching.	Joachim Strömbergson

2018-08-24	Performed Verilog parameter magic to make the design scaleable in terms of ↵	Joachim Strömbergson
	capacity. Does not yet work, but at least the linter is fairly happy.
2018-08-23	Adding top level defines for setting size and address bits.	Joachim Strömbergson

2018-08-16	Adding delay cycle to API regs to match the latency for accessing the ↵	Joachim Strömbergson
	blockRAM. Added test case that checks access to the API regs.
2018-08-15	Fix some misleading messages, and enable all tests.	Paul Selkirk

2018-07-24	Added explicit width specification for constant to silence truncation warning.	Joachim Strömbergson

2018-07-06	(1) Updated version to reflect status. (2) Minor fix after running sim in ↵	Joachim Strömbergson
	ModelSim.
2018-07-06	Adding test case for 4096 bit unwrap. Testcase passed! We have unwrap.	Joachim Strömbergson