//======================================================================
//
// tb_keywrap.v
// ------------
// Testbench for the keywrap top level wrapper (and core).
//
//
// Author: Joachim Strombergson
// Copyright (c) 2018, NORDUnet A/S
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
// - Redistributions of source code must retain the above copyright notice,
// this list of conditions and the following disclaimer.
//
// - Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
//
// - Neither the name of the NORDUnet nor the names of its contributors may
// be used to endorse or promote products derived from this software
// without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
//======================================================================
module tb_keywrap();
parameter DEBUG = 0;
parameter CLK_HALF_PERIOD = 1;
parameter CLK_PERIOD = 2 * CLK_HALF_PERIOD;
// API for the core.
localparam ADDR_NAME0 = 8'h00;
localparam ADDR_NAME1 = 8'h01;
localparam ADDR_VERSION = 8'h02;
localparam ADDR_CTRL = 8'h08;
localparam CTRL_INIT_BIT = 0;
localparam CTRL_NEXT_BIT = 1;
localparam ADDR_STATUS = 8'h09;
localparam STATUS_READY_BIT = 0;
localparam STATUS_VALID_BIT = 1;
localparam ADDR_CONFIG = 8'h0a;
localparam CTRL_ENCDEC_BIT = 0;
localparam CTRL_KEYLEN_BIT = 1;
localparam ADDR_RLEN = 8'h0c;
localparam ADDR_A_LSB = 8'h0e;
localparam ADDR_A_MSB = 8'h0f;
localparam ADDR_KEY0 = 8'h10;
localparam ADDR_KEY7 = 8'h17;
localparam ADDR_WRITE_DATA = 8'h20;
localparam ADDR_READ_DATA = 8'h30;
//----------------------------------------------------------------
// Register and Wire declarations.
//----------------------------------------------------------------
reg [31 : 0] cycle_ctr;
reg [31 : 0] error_ctr;
reg [31 : 0] tc_ctr;
reg [31 : 0] read_data;
reg [127 : 0] result_data;
reg tb_clk;
reg tb_reset_n;
reg tb_cs;
reg tb_we;
reg [7 : 0] tb_address;
reg [31 : 0] tb_write_data;
wire [31 : 0] tb_read_data;
wire tb_error;
//----------------------------------------------------------------
// Device Under Test.
//----------------------------------------------------------------
keywrap dut(
.clk(tb_clk),
.reset_n(tb_reset_n),
.cs(tb_cs),
.we(tb_we),
.address(tb_address),
.write_data(tb_write_data),
.read_data(tb_read_data),
.error(tb_error)
);
//----------------------------------------------------------------
// clk_gen
//
// Always running clock generator process.
//----------------------------------------------------------------
always
begin : clk_gen
#CLK_HALF_PERIOD;
tb_clk = !tb_clk;
end // clk_gen
//----------------------------------------------------------------
// sys_monitor()
//
// An always running process that creates a cycle counter and
// conditionally displays information about the DUT.
//----------------------------------------------------------------
always
begin : sys_monitor
cycle_ctr = cycle_ctr + 1;
#(CLK_PERIOD);
end
//----------------------------------------------------------------
// read_word()
//
// Read a data word from the given address in the DUT.
// the word read will be available in the global variable
// read_data.
//----------------------------------------------------------------
task read_word(input [11 : 0] address);
begin
tb_address = address;
tb_cs = 1;
tb_we = 0;
#(CLK_PERIOD);
read_data = tb_read_data;
tb_cs = 0;
if (DEBUG)
begin
$display("*** Reading 0x%08x from 0x%02x.", read_data, address);
$display("");
end
end
endtask // read_word
//----------------------------------------------------------------
// write_word()
//
// Write the given word to the DUT using the DUT interface.
//----------------------------------------------------------------
task write_word(input [11 : 0] address,
input [31 : 0] word);
begin
if (DEBUG)
begin
$display("*** Writing 0x%08x to 0x%02x.", word, address);
$display("");
end
tb_address = address;
tb_write_data = word;
tb_cs = 1;
tb_we = 1;
#(2 * CLK_PERIOD);
tb_cs = 0;
tb_we = 0;
end
endtask // write_word
//----------------------------------------------------------------
// wait_ready
//
// Wait for the DUT to signal that the result is ready
//----------------------------------------------------------------
task wait_ready;
begin : wait_ready
reg rdy;
rdy = 1'b0;
while (rdy != 1'b1)
begin
read_word(ADDR_STATUS);
rdy = tb_read_data[STATUS_READY_BIT];
end
end
endtask // wait_ready
//----------------------------------------------------------------
// init_sim()
//
// Initialize all counters and testbed functionality as well
// as setting the DUT inputs to defined values.
//----------------------------------------------------------------
initial
begin
cycle_ctr = 0;
tb_clk = 0;
tb_reset_n = 0;
#(CLK_PERIOD * 10);
tb_reset_n = 1;
#(CLK_PERIOD * 10);
$finish;
end
endmodule // tb_keywrap
//======================================================================
// EOF tb_keywrap.v
//======================================================================
