//======================================================================
//
// tb_systolic_multiplier.v
// -----------------------------------------------------------------------------
// Testbench for systolic Montgomery multiplier.
//
// Authors: Pavel Shatov
//
// Copyright (c) 2017, NORDUnet A/S All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
// - Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// - Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
//
// - Neither the name of the NORDUnet nor the names of its contributors may
// be used to endorse or promote products derived from this software
// without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
//======================================================================
`timescale 1ns / 1ps
module tb_systolic_multiplier;
//
// Test Vectors
//
`include "modexp_fpga_model_vectors.v";
//
// Parameters
//
localparam NUM_WORDS_384 = 384 / 32;
localparam NUM_WORDS_512 = 512 / 32;
//
// Model Settings
//
localparam NUM_ROUNDS = 1000;
//
// Clock (100 MHz)
//
reg clk = 1'b0;
always #5 clk = ~clk;
//
// Inputs
//
reg rst_n;
reg ena;
reg [ 3: 0] n_num_words;
//
// Outputs
//
wire rdy;
//
// Integers
//
integer w;
//
// BRAM Interfaces
//
wire [ 3: 0] core_a_addr;
wire [ 3: 0] core_b_addr;
wire [ 3: 0] core_n_addr;
wire [ 3: 0] core_n_coeff_addr;
wire [ 3: 0] core_r_addr;
wire [31: 0] core_a_data;
wire [31: 0] core_b_data;
wire [31: 0] core_n_data;
wire [31: 0] core_n_coeff_data;
wire [31: 0] core_r_data;
wire core_r_wren;
reg [ 3: 0] tb_abn_addr;
reg [ 3: 0] tb_r_addr;
reg [31:0] tb_a_data;
reg [31:0] tb_b_data;
reg [31:0] tb_n_data;
reg [31:0] tb_n_coeff_data;
wire [31:0] tb_r_data;
reg tb_abn_wren;
//
// BRAMs
//
bram_1rw_1ro_readfirst #(.MEM_WIDTH(32), .MEM_ADDR_BITS(4))
bram_a (.clk(clk),
.a_addr(tb_abn_addr), .a_wr(tb_abn_wren), .a_in(tb_a_data), .a_out(),
.b_addr(core_a_addr), .b_out(core_a_data));
bram_1rw_1ro_readfirst #(.MEM_WIDTH(32), .MEM_ADDR_BITS(4))
bram_b (.clk(clk),
.a_addr(tb_abn_addr), .a_wr(tb_abn_wren), .a_in(tb_b_data), .a_out(),
.b_addr(core_b_addr), .b_out(core_b_data));
bram_1rw_1ro_readfirst #(.MEM_WIDTH(32), .MEM_ADDR_BITS(4))
bram_n (.clk(clk),
.a_addr(tb_abn_addr), .a_wr(tb_abn_wren), .a_in(tb_n_data), .a_out(),
.b_addr(core_n_addr), .b_out(core_n_data));
bram_1rw_1ro_readfirst #(.MEM_WIDTH(32), .MEM_ADDR_BITS(4))
bram_n_coeff (.clk(clk),
.a_addr(tb_abn_addr), .a_wr(tb_abn_wren), .a_in(tb_n_coeff_data), .a_out(),
.b_addr(core_n_coeff_addr), .b_out(core_n_coeff_data));
bram_1rw_1ro_readfirst #(.MEM_WIDTH(32), .MEM_ADDR_BITS(4))
bram_r (.clk(clk),
.a_addr(core_r_addr), .a_wr(core_r_wren), .a_in(core_r_data), .a_out(),
.b_addr(tb_r_addr), .b_out(tb_r_data));
//
// UUT
//
modexpa7_systolic_multiplier #
(
.OPERAND_ADDR_WIDTH (4), // 32 * (2**4) = 512-bit operands
.SYSTOLIC_ARRAY_POWER (2) // 2 ** 2 = 4-tap array
)
uut
(
.clk (clk),
.rst_n (rst_n),
.ena (ena),
.rdy (rdy),
.a_bram_addr (core_a_addr),
.b_bram_addr (core_b_addr),
.n_bram_addr (core_n_addr),
.n_coeff_bram_addr (core_n_coeff_addr),
.r_bram_addr (core_r_addr),
.a_bram_out (core_a_data),
.b_bram_out (core_b_data),
.n_bram_out (core_n_data),
.n_coeff_bram_out (core_n_coeff_data),
.r_bram_in (core_r_data),
.r_bram_wr (core_r_wren),
.n_num_words (n_num_words)
);
//
// Script
//
initial begin
rst_n = 1'b0;
ena = 1'b0;
#200;
rst_n = 1'b1;
#100;
test_systolic_multiplier_384(M_384, N_384, N_COEFF_384, FACTOR_384, COEFF_384);
test_systolic_multiplier_512(M_512, N_512, N_COEFF_512, FACTOR_512, COEFF_512);
end
//
// Test Tasks
//
task test_systolic_multiplier_384;
input [383:0] m;
input [383:0] n;
input [383:0] n_coeff;
input [383:0] factor;
input [383:0] coeff;
reg [767:0] m_factor_full;
reg [383:0] m_factor_modulo;
reg [383:0] a;
reg [383:0] b;
reg [383:0] r;
reg [767:0] ab_full;
reg [383:0] ab_modulo;
integer round;
integer num_passed;
integer num_failed;
begin
m_factor_full = m * factor; // m * factor
m_factor_modulo = m_factor_full % n; // m * factor % n
m_factor_full = m_factor_modulo * coeff; // m * factor * coeff
m_factor_modulo = m_factor_full % n; // m * factor * coeff % n
a = m_factor_modulo; // start with a = m_factor...
b = m_factor_modulo; // ... and b = m_factor
n_num_words = 4'd11; // set number of words
num_passed = 0; // nothing tested so far
num_failed = 0; //
for (round=0; round<NUM_ROUNDS; round=round+1) begin
// obtain reference value of product
ab_full = a * b; // calculate product
ab_modulo = ab_full % n; // reduce
ab_full = ab_modulo * coeff; // take extra coefficient into account
ab_modulo = ab_full % n; // reduce again
write_memories_384(a, b, n, n_coeff); // fill memories
ena = 1; // start operation
#10; //
ena = 0; // clear flag
while (!rdy) #10; // wait for operation to complete
read_memory_384(r); // get result from memory
$display("test_systolic_multiplier_384(): round #%0d of %0d", round+1, NUM_ROUNDS);
$display(" calculated: %x", r);
$display(" expected: %x", ab_modulo);
// check calculated value
if (r === ab_modulo) begin
$display(" OK");
num_passed = num_passed + 1;
end else begin
$display(" ERROR");
num_failed = num_failed + 1;
end
b = ab_modulo; // prepare for next round
end
// final step, display results
if (num_passed == NUM_ROUNDS)
$display("SUCCESS: All tests passed.");
else
$display("FAILURE: %0d test(s) not passed.", num_failed);
end
endtask
//
// Test Tasks
//
task test_systolic_multiplier_512;
input [ 511:0] m;
input [ 511:0] n;
input [ 511:0] n_coeff;
input [ 511:0] factor;
input [ 511:0] coeff;
reg [1023:0] m_factor_full;
reg [ 511:0] m_factor_modulo;
reg [ 511:0] a;
reg [ 511:0] b;
reg [ 511:0] r;
reg [1023:0] ab_full;
reg [ 511:0] ab_modulo;
integer round;
integer num_passed;
integer num_failed;
begin
m_factor_full = m * factor; // m * factor
m_factor_modulo = m_factor_full % n; // m * factor % n
m_factor_full = m_factor_modulo * coeff; // m * factor * coeff
m_factor_modulo = m_factor_full % n; // m * factor * coeff % n
a = m_factor_modulo; // start with a = m_factor...
b = m_factor_modulo; // ... and b = m_factor
n_num_words = 4'd15; // set number of words
num_passed = 0; // nothing tested so far
num_failed = 0; //
for (round=0; round<NUM_ROUNDS; round=round+1) begin
// obtain reference value of product
ab_full = a * b; // calculate product
ab_modulo = ab_full % n; // reduce
ab_full = ab_modulo * coeff; // take extra coefficient into account
ab_modulo = ab_full % n; // reduce again
write_memories_512(a, b, n, n_coeff); // fill memories
ena = 1; // start operation
#10; //
ena = 0; // clear flag
while (!rdy) #10; // wait for operation to complete
read_memory_512(r); // get result from memory
$display("test_systolic_multiplier_512(): round #%0d of %0d", round+1, NUM_ROUNDS);
$display(" calculated: %x", r);
$display(" expected: %x", ab_modulo);
// check calculated value
if (r === ab_modulo) begin
$display(" OK");
num_passed = num_passed + 1;
end else begin
$display(" ERROR");
num_failed = num_failed + 1;
end
b = ab_modulo; // prepare for next round
end
// final step, display results
if (num_passed == NUM_ROUNDS)
$display("SUCCESS: All tests passed.");
else
$display("FAILURE: %0d test(s) not passed.", num_failed);
end
endtask
//
// BRAM Writer
//
task write_memories_384;
input [383:0] a;
input [383:0] b;
input [383:0] n;
input [383:0] n_coeff;
reg [383:0] a_shreg;
reg [383:0] b_shreg;
reg [383:0] n_shreg;
reg [383:0] n_coeff_shreg;
begin
tb_abn_wren = 1; // start filling memories
a_shreg = a; // initialize shift registers
b_shreg = b; //
n_shreg = n; //
n_coeff_shreg = n_coeff; //
for (w=0; w<NUM_WORDS_384; w=w+1) begin // write all words
tb_abn_addr = w[3:0]; // set addresses
tb_a_data = a_shreg[31:0]; // set data words
tb_b_data = b_shreg[31:0]; //
tb_n_data = n_shreg[31:0]; //
tb_n_coeff_data = n_coeff_shreg[31:0]; //
a_shreg = {{32{1'bX}}, a_shreg[383:32]}; // shift inputs
b_shreg = {{32{1'bX}}, b_shreg[383:32]}; //
n_shreg = {{32{1'bX}}, n_shreg[383:32]}; //
n_coeff_shreg = {{32{1'bX}}, n_coeff_shreg[383:32]}; //
#10; // wait for 1 clock tick
end
tb_abn_addr = {4{1'bX}}; // wipe addresses
tb_a_data = {32{1'bX}}; // wipe data words
tb_b_data = {32{1'bX}}; //
tb_n_data = {32{1'bX}}; //
tb_n_coeff_data = {32{1'bX}}; //
tb_abn_wren = 0; // stop filling memories
end
endtask
//
// BRAM Writer
//
task write_memories_512;
input [511:0] a;
input [511:0] b;
input [511:0] n;
input [511:0] n_coeff;
reg [511:0] a_shreg;
reg [511:0] b_shreg;
reg [511:0] n_shreg;
reg [511:0] n_coeff_shreg;
begin
tb_abn_wren = 1; // start filling memories
a_shreg = a; // initialize shift registers
b_shreg = b; //
n_shreg = n; //
n_coeff_shreg = n_coeff; //
for (w=0; w<NUM_WORDS_512; w=w+1) begin // write all words
tb_abn_addr = w[3:0]; // set addresses
tb_a_data = a_shreg[31:0]; // set data words
tb_b_data = b_shreg[31:0]; //
tb_n_data = n_shreg[31:0]; //
tb_n_coeff_data = n_coeff_shreg[31:0]; //
a_shreg = {{32{1'bX}}, a_shreg[511:32]}; // shift inputs
b_shreg = {{32{1'bX}}, b_shreg[511:32]}; //
n_shreg = {{32{1'bX}}, n_shreg[511:32]}; //
n_coeff_shreg = {{32{1'bX}}, n_coeff_shreg[511:32]}; //
#10; // wait for 1 clock tick
end
tb_abn_addr = {4{1'bX}}; // wipe addresses
tb_a_data = {32{1'bX}}; // wipe data words
tb_b_data = {32{1'bX}}; //
tb_n_data = {32{1'bX}}; //
tb_n_coeff_data = {32{1'bX}}; //
tb_abn_wren = 0; // stop filling memories
end
endtask
//
// BRAM Reader
//
task read_memory_384;
output [383:0] r;
reg [383:0] r_shreg;
begin
for (w=0; w<NUM_WORDS_384; w=w+1) begin // read result
tb_r_addr = w[3:0]; // set address
#10; // wait for 1 clock tick
r_shreg = {tb_r_data, r_shreg[383:32]}; // store data word
end
tb_r_addr = {4{1'bX}}; // wipe address
r = r_shreg; // return
end
endtask
//
// BRAM Reader
//
task read_memory_512;
output [511:0] r;
reg [511:0] r_shreg;
begin
for (w=0; w<NUM_WORDS_512; w=w+1) begin // read result
tb_r_addr = w[3:0]; // set address
#10; // wait for 1 clock tick
r_shreg = {tb_r_data, r_shreg[511:32]}; // store data word
end
tb_r_addr = {4{1'bX}}; // wipe address
r = r_shreg; // return
end
endtask
endmodule
//======================================================================
// End of file
//======================================================================
