Promote code common to both ECDSA* cores to separate repository in core/ tree.

Pavel's two ECDSA base point multiplier cores share a fair amount of
code.  Maintenance issues aside, the duplication confused the Xilinx
synthesis tools if one tried to build a single bitstream containing
both cores, so we've separated the common code out into this library.

The selection of files in this library was done by comparing the rtl
trees of the two original core repositories using "diff -rqws" and
selecting the files which diff reported as being identical.

Also dealt with some cosmetic issues (indentation, Windows-isms, etc).

47 files changed, 4514 insertions, 8085 deletions

diff --git a/rtl/curve/curve_dbl_add_256.v b/rtl/curve/curve_dbl_add_256.v
deleted file mode 100644
index 8ef505d..0000000
--- a/rtl/curve/curve_dbl_add_256.v
+++ /dev/null
@@ -1,874 +0,0 @@
-//------------------------------------------------------------------------------

-//

-// curve_dbl_add_256.v

-// -----------------------------------------------------------------------------

-// Elliptic curve point adder and doubler.

-//

-// Authors: Pavel Shatov

-//

-// Copyright (c) 2016, NORDUnet A/S

-//

-// Redistribution and use in source and binary forms, with or without

-// modification, are permitted provided that the following conditions are met:

-//

-// - Redistributions of source code must retain the above copyright notice,

-//   this list of conditions and the following disclaimer.

-//

-// - Redistributions in binary form must reproduce the above copyright notice,

-//   this list of conditions and the following disclaimer in the documentation

-//   and/or other materials provided with the distribution.

-//

-// - Neither the name of the NORDUnet nor the names of its contributors may be

-//   used to endorse or promote products derived from this software without

-//   specific prior written permission.

-//

-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"

-// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

-// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

-// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE

-// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

-// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

-// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

-// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN

-// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

-// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

-// POSSIBILITY OF SUCH DAMAGE.

-//

-//------------------------------------------------------------------------------

-

-module curve_dbl_add_256

-	(

-		clk, rst_n,

-		ena, rdy,

-		uop_addr, uop,

-		px_addr, py_addr, pz_addr, rx_addr, ry_addr, rz_addr, q_addr, v_addr,

-		rx_wren, ry_wren, rz_wren,

-		px_din, py_din, pz_din,

-		rx_din, ry_din, rz_din,

-		rx_dout, ry_dout, rz_dout, q_din, v_din

-	);

-

-

-		//

-		// Microcode

-		//

-`include "uop_ecdsa.v"

-

-

-		//

-		// Constants

-		//

-	localparam	WORD_COUNTER_WIDTH	= 3;	// 0 .. 7

-	localparam	OPERAND_NUM_WORDS		= 8;	// 8 * 32 = 256

-

-	

-		//

-		// Ports

-		//

-	input		wire	clk;		// system clock

-	input		wire	rst_n;	// active-low async reset

-	

-	input		wire	ena;		// enable input

-	output	wire	rdy;		// ready output

-		

-	output	reg	[ 6-1: 0]	uop_addr;

-	input		wire	[20-1: 0]	uop;

-		

-	output	reg	[WORD_COUNTER_WIDTH-1:0]	px_addr;

-	output	reg	[WORD_COUNTER_WIDTH-1:0]	py_addr;

-	output	reg	[WORD_COUNTER_WIDTH-1:0]	pz_addr;

-	output	reg	[WORD_COUNTER_WIDTH-1:0]	rx_addr;

-	output	reg	[WORD_COUNTER_WIDTH-1:0]	ry_addr;

-	output	reg	[WORD_COUNTER_WIDTH-1:0]	rz_addr;

-	output	reg	[WORD_COUNTER_WIDTH-1:0]	v_addr;

-	output	wire	[WORD_COUNTER_WIDTH-1:0]	q_addr;

-	

-	output	wire										rx_wren;

-	output	wire										ry_wren;

-	output	wire										rz_wren;

-

-	input		wire	[                32-1:0]	px_din;

-	input		wire	[                32-1:0]	py_din;

-	input		wire	[                32-1:0]	pz_din;

-	input		wire	[                32-1:0]	rx_din;

-	input		wire	[                32-1:0]	ry_din;

-	input		wire	[                32-1:0]	rz_din;

-	output	wire	[                32-1:0]	rx_dout;

-	output	wire	[                32-1:0]	ry_dout;

-	output	wire	[                32-1:0]	rz_dout;

-	input		wire	[                32-1:0]	q_din;

-	input		wire	[                32-1:0]	v_din;

-

-	

-		//

-		// Microcode

-		//   

-	wire	[ 4: 0]	uop_opcode	= uop[19:15];

-	wire	[ 4: 0]	uop_src_a	= uop[14:10];

-	wire	[ 4: 0]	uop_src_b	= uop[ 9: 5];

-	wire	[ 2: 0]	uop_dst		= uop[ 4: 2];

-	wire	[ 1: 0]	uop_exec		= uop[ 1: 0];

-	

-

-		//

-		// Multi-Word Comparator

-		//

-	wire	mw_cmp_ena;

-	wire	mw_cmp_rdy;

-		

-	wire	mw_cmp_out_l;

-	wire	mw_cmp_out_e;

-	wire	mw_cmp_out_g;

-	

-	wire	[WORD_COUNTER_WIDTH-1:0]	mw_cmp_addr_xy;

-	

-	wire	[                32-1:0]	mw_cmp_din_x;

-	wire	[                32-1:0]	mw_cmp_din_y;

-

-		// flags

-	reg	flag_pz_is_zero;

-	reg	flag_t1_is_zero;

-	reg	flag_t2_is_zero;

-	

-	mw_comparator #

-	(

-		.WORD_COUNTER_WIDTH	(WORD_COUNTER_WIDTH),

-		.OPERAND_NUM_WORDS	(OPERAND_NUM_WORDS)

-	)

-	mw_comparator_inst

-	(

-		.clk			(clk),

-		.rst_n		(rst_n),

-		

-		.ena			(mw_cmp_ena),

-		.rdy			(mw_cmp_rdy),

-		

-		.xy_addr		(mw_cmp_addr_xy),

-		.x_din		(mw_cmp_din_x),

-		.y_din		(mw_cmp_din_y),

-		

-		.cmp_l		(mw_cmp_out_l),

-		.cmp_e		(mw_cmp_out_e),

-		.cmp_g		(mw_cmp_out_g)

-	);

-	

-	

-		//

-		// Modular Adder

-		//

-	wire	mod_add_ena;

-	wire	mod_add_rdy;

-	

-	wire	[WORD_COUNTER_WIDTH-1:0]	mod_add_addr_ab;

-	wire	[WORD_COUNTER_WIDTH-1:0]	mod_add_addr_n;

-	wire	[WORD_COUNTER_WIDTH-1:0]	mod_add_addr_s;

-	wire										mod_add_wren_s;

-	

-	wire	[                32-1:0]	mod_add_din_a;

-	wire	[                32-1:0]	mod_add_din_b;

-	wire	[                32-1:0]	mod_add_din_n;

-	wire	[                32-1:0]	mod_add_dout_s;

-	

-	assign mod_add_din_n = q_din;

-	

-	modular_adder #

-	(

-		.WORD_COUNTER_WIDTH	(WORD_COUNTER_WIDTH),

-		.OPERAND_NUM_WORDS	(OPERAND_NUM_WORDS)

-	)

-	modular_adder_inst

-	(

-		.clk			(clk),

-		.rst_n		(rst_n),

-		

-		.ena			(mod_add_ena),

-		.rdy			(mod_add_rdy),

-		

-		.ab_addr		(mod_add_addr_ab),

-		.n_addr		(mod_add_addr_n),

-		.s_addr		(mod_add_addr_s),

-		.s_wren		(mod_add_wren_s),

-		

-		.a_din		(mod_add_din_a),

-		.b_din		(mod_add_din_b),

-		.n_din		(mod_add_din_n),

-		.s_dout		(mod_add_dout_s)

-	);

-	

-	

-		//

-		// Modular Subtractor

-		//

-	wire	mod_sub_ena;

-	wire	mod_sub_rdy;

-	

-	wire	[WORD_COUNTER_WIDTH-1:0]	mod_sub_addr_ab;

-	wire	[WORD_COUNTER_WIDTH-1:0]	mod_sub_addr_n;

-	wire	[WORD_COUNTER_WIDTH-1:0]	mod_sub_addr_d;

-	wire										mod_sub_wren_d;

-	

-	wire	[                32-1:0]	mod_sub_din_a;

-	wire	[                32-1:0]	mod_sub_din_b;

-	wire	[                32-1:0]	mod_sub_din_n;

-	wire	[                32-1:0]	mod_sub_dout_d;

-	

-	assign mod_sub_din_n = q_din;

-	

-	modular_subtractor #

-	(

-		.WORD_COUNTER_WIDTH	(WORD_COUNTER_WIDTH),

-		.OPERAND_NUM_WORDS	(OPERAND_NUM_WORDS)

-	)

-	modular_subtractor_inst

-	(

-		.clk			(clk),

-		.rst_n		(rst_n),

-		

-		.ena			(mod_sub_ena),

-		.rdy			(mod_sub_rdy),

-		

-		.ab_addr		(mod_sub_addr_ab),

-		.n_addr		(mod_sub_addr_n),

-		.d_addr		(mod_sub_addr_d),

-		.d_wren		(mod_sub_wren_d),

-		

-		.a_din		(mod_sub_din_a),

-		.b_din		(mod_sub_din_b),

-		.n_din		(mod_sub_din_n),

-		.d_dout		(mod_sub_dout_d)

-	);

-	

-	

-		//

-		// Modular Multiplier

-		//

-	wire	mod_mul_ena;

-	wire	mod_mul_rdy;

-	

-	wire	[WORD_COUNTER_WIDTH-1:0]	mod_mul_addr_a;

-	wire	[WORD_COUNTER_WIDTH-1:0]	mod_mul_addr_b;

-	wire	[WORD_COUNTER_WIDTH-1:0]	mod_mul_addr_n;

-	wire	[WORD_COUNTER_WIDTH-1:0]	mod_mul_addr_p;

-	wire										mod_mul_wren_p;

-	

-	wire	[                32-1:0]	mod_mul_din_a;

-	wire	[                32-1:0]	mod_mul_din_b;

-	wire	[                32-1:0]	mod_mul_din_n;

-	wire	[                32-1:0]	mod_mul_dout_p;

-	

-	assign mod_mul_din_n = q_din;

-	

-	modular_multiplier_256 modular_multiplier_inst

-	(

-		.clk		(clk),

-		.rst_n	(rst_n),

-		

-		.ena		(mod_mul_ena),

-		.rdy		(mod_mul_rdy),

-		

-		.a_addr	(mod_mul_addr_a),

-		.b_addr	(mod_mul_addr_b),

-		.n_addr	(mod_mul_addr_n),

-		.p_addr	(mod_mul_addr_p),

-		.p_wren	(mod_mul_wren_p),

-		

-		.a_din	(mod_mul_din_a),

-		.b_din	(mod_mul_din_b),

-		.n_din	(mod_mul_din_n),

-		.p_dout	(mod_mul_dout_p)

-	);

-	

-	

-		//

-		// Multi-Word Data Mover

-		//

-	wire	mw_mov_ena;

-	wire	mw_mov_rdy;

-	

-	wire	[WORD_COUNTER_WIDTH-1:0]	mw_mov_addr_x;

-	wire	[WORD_COUNTER_WIDTH-1:0]	mw_mov_addr_y;

-	wire										mw_mov_wren_y;

-	

-	wire	[                32-1:0]	mw_mov_din_x;

-	wire	[                32-1:0]	mw_mov_dout_y;

-	

-	mw_mover #

-	(

-		.WORD_COUNTER_WIDTH	(WORD_COUNTER_WIDTH),

-		.OPERAND_NUM_WORDS	(OPERAND_NUM_WORDS)

-

-	)

-	mw_mover_inst

-	(

-		.clk		(clk),

-		.rst_n	(rst_n),

-		

-		.ena		(mw_mov_ena),

-		.rdy		(mw_mov_rdy),

-		

-		.x_addr	(mw_mov_addr_x),

-		.y_addr	(mw_mov_addr_y),

-		.y_wren	(mw_mov_wren_y),

-		

-		.x_din	(mw_mov_din_x),

-		.y_dout	(mw_mov_dout_y)

-	);

-	

-	

-		//

-		// ROMs

-		//

-	reg	[WORD_COUNTER_WIDTH-1:0]	brom_one_addr;

-	//reg	[WORD_COUNTER_WIDTH-1:0]	brom_zero_addr;

-	reg	[WORD_COUNTER_WIDTH-1:0]	brom_delta_addr;

-	reg	[WORD_COUNTER_WIDTH-1:0]	brom_g_x_addr;

-	reg	[WORD_COUNTER_WIDTH-1:0]	brom_g_y_addr;

-	reg	[WORD_COUNTER_WIDTH-1:0]	brom_h_x_addr;

-	reg	[WORD_COUNTER_WIDTH-1:0]	brom_h_y_addr;

-

-	wire	[                32-1:0]	brom_one_dout;

-	wire	[                32-1:0]	brom_zero_dout;

-	wire	[                32-1:0]	brom_delta_dout;

-	wire	[                32-1:0]	brom_g_x_dout;

-	wire	[                32-1:0]	brom_g_y_dout;

-	wire	[                32-1:0]	brom_h_x_dout;

-	wire	[                32-1:0]	brom_h_y_dout;

-	

-	(* ROM_STYLE="BLOCK" *) brom_p256_one brom_one_inst

-		(.clk(clk), .b_addr(brom_one_addr), .b_out(brom_one_dout));

-		

-	brom_p256_zero brom_zero_inst

-		(.b_out(brom_zero_dout));

-		

-	(* ROM_STYLE="BLOCK" *) brom_p256_delta brom_delta_inst

-		(.clk(clk), .b_addr(brom_delta_addr), .b_out(brom_delta_dout));

-	

-	(* ROM_STYLE="BLOCK" *) brom_p256_g_x brom_g_x_inst

-		(.clk(clk), .b_addr(brom_g_x_addr), .b_out(brom_g_x_dout));

-

-	(* ROM_STYLE="BLOCK" *) brom_p256_g_y brom_g_y_inst

-		(.clk(clk), .b_addr(brom_g_y_addr), .b_out(brom_g_y_dout));

-		

-	(* ROM_STYLE="BLOCK" *) brom_p256_h_x brom_h_x_inst

-		(.clk(clk), .b_addr(brom_h_x_addr), .b_out(brom_h_x_dout));

-

-	(* ROM_STYLE="BLOCK" *) brom_p256_h_y brom_h_y_inst

-		(.clk(clk), .b_addr(brom_h_y_addr), .b_out(brom_h_y_dout));

-

-	

-		//

-		// Temporary Variables

-		//

-	reg	[WORD_COUNTER_WIDTH-1:0]	bram_t1_wr_addr;

-	reg	[WORD_COUNTER_WIDTH-1:0]	bram_t2_wr_addr;

-	reg	[WORD_COUNTER_WIDTH-1:0]	bram_t3_wr_addr;

-	reg	[WORD_COUNTER_WIDTH-1:0]	bram_t4_wr_addr;

-	

-	reg	[WORD_COUNTER_WIDTH-1:0]	bram_t1_rd_addr;

-	reg	[WORD_COUNTER_WIDTH-1:0]	bram_t2_rd_addr;

-	reg	[WORD_COUNTER_WIDTH-1:0]	bram_t3_rd_addr;

-	reg	[WORD_COUNTER_WIDTH-1:0]	bram_t4_rd_addr;

-	

-	wire										bram_t1_wr_en;

-	wire										bram_t2_wr_en;

-	wire										bram_t3_wr_en;

-	wire										bram_t4_wr_en;

-	

-	wire	[                32-1:0]	bram_t1_wr_data;

-	wire	[                32-1:0]	bram_t2_wr_data;

-	wire	[                32-1:0]	bram_t3_wr_data;

-	wire	[                32-1:0]	bram_t4_wr_data;

-	

-	wire	[                32-1:0]	bram_t1_rd_data;

-	wire	[                32-1:0]	bram_t2_rd_data;

-	wire	[                32-1:0]	bram_t3_rd_data;

-	wire	[                32-1:0]	bram_t4_rd_data;

-		

-	bram_1rw_1ro_readfirst #

-	(	.MEM_WIDTH(32), .MEM_ADDR_BITS(WORD_COUNTER_WIDTH)

-	)

-	bram_t1

-	(	.clk		(clk),

-		.a_addr(bram_t1_wr_addr), .a_wr(bram_t1_wr_en), .a_in(bram_t1_wr_data), .a_out(),

-		.b_addr(bram_t1_rd_addr),                                               .b_out(bram_t1_rd_data)

-	);

-	

-	bram_1rw_1ro_readfirst #

-	(	.MEM_WIDTH(32), .MEM_ADDR_BITS(WORD_COUNTER_WIDTH)

-	)

-	bram_t2

-	(	.clk		(clk),

-		.a_addr(bram_t2_wr_addr), .a_wr(bram_t2_wr_en), .a_in(bram_t2_wr_data), .a_out(),

-		.b_addr(bram_t2_rd_addr),                                               .b_out(bram_t2_rd_data)

-	);

-	

-	bram_1rw_1ro_readfirst #

-	(	.MEM_WIDTH(32), .MEM_ADDR_BITS(WORD_COUNTER_WIDTH)

-	)

-	bram_t3

-	(	.clk		(clk),

-		.a_addr(bram_t3_wr_addr), .a_wr(bram_t3_wr_en), .a_in(bram_t3_wr_data), .a_out(),

-		.b_addr(bram_t3_rd_addr),                                               .b_out(bram_t3_rd_data)

-	);

-	

-	bram_1rw_1ro_readfirst #

-	(	.MEM_WIDTH(32), .MEM_ADDR_BITS(WORD_COUNTER_WIDTH)

-	)

-	bram_t4

-	(	.clk		(clk),

-		.a_addr(bram_t4_wr_addr), .a_wr(bram_t4_wr_en), .a_in(bram_t4_wr_data), .a_out(),

-		.b_addr(bram_t4_rd_addr),                                               .b_out(bram_t4_rd_data)

-	);

-	

-

-		//

-		// uOP Trigger Logic

-		//

-	reg	uop_trig;

-	always @(posedge clk or negedge rst_n)

-		//

-		if (rst_n == 1'b0)	uop_trig <= 1'b0;

-		else						uop_trig <= (fsm_state == FSM_STATE_FETCH) ? 1'b1 : 1'b0;

-		

-

-		//

-		// FSM

-		//

-	localparam	[ 1: 0]	FSM_STATE_STALL	= 2'b00;

-	localparam	[ 1: 0]	FSM_STATE_FETCH	= 2'b01;

-	localparam	[ 1: 0]	FSM_STATE_EXECUTE	= 2'b10;

-	

-	reg	[ 1: 0]	fsm_state		= FSM_STATE_STALL;

-	wire	[ 1: 0]	fsm_state_next	= (uop_opcode == OPCODE_RDY) ? FSM_STATE_STALL : FSM_STATE_FETCH;

-	

-	

-		//

-		// FSM Transition Logic

-		//

-	reg	uop_done;

-	

-	always @(posedge clk or negedge rst_n)

-		//

-		if (rst_n == 1'b0)		fsm_state <= FSM_STATE_STALL;

-		else case (fsm_state)

-			FSM_STATE_STALL:		fsm_state <= ena ? FSM_STATE_FETCH : FSM_STATE_STALL;

-			FSM_STATE_FETCH:		fsm_state <= FSM_STATE_EXECUTE;

-			FSM_STATE_EXECUTE:	fsm_state <= (!uop_trig && uop_done) ? fsm_state_next : FSM_STATE_EXECUTE;

-			default:					fsm_state <= FSM_STATE_STALL;

-		endcase

-	

-	

-		//

-		// uOP Address Increment Logic

-		//

-	always @(posedge clk)

-		//

-		if (fsm_state == FSM_STATE_STALL)

-			uop_addr <= 5'd0;

-		else if (fsm_state == FSM_STATE_EXECUTE)

-			if (!uop_trig && uop_done)

-				uop_addr <= (uop_opcode == OPCODE_RDY) ? 5'd0 : uop_addr + 1'b1;

-		

-	

-		//

-		// uOP Completion Logic

-		//

-	always @(*)

-		//

-		case (uop_opcode)

-			OPCODE_CMP:	uop_done = mw_cmp_rdy;

-			OPCODE_MOV:	uop_done = mw_mov_rdy;

-			OPCODE_ADD:	uop_done = mod_add_rdy;

-			OPCODE_SUB:	uop_done = mod_sub_rdy;

-			OPCODE_MUL:	uop_done = mod_mul_rdy;

-			OPCODE_RDY:	uop_done = 1'b1;

-			default:		uop_done = 1'b0;

-		endcase

-	

-

-		//

-		// Helper Modules Enable Logic

-		//

-	assign mw_cmp_ena		= uop_opcode[0] & uop_trig;

-	assign mw_mov_ena		= uop_opcode[1] & uop_trig;

-	assign mod_add_ena	= uop_opcode[2] & uop_trig;

-	assign mod_sub_ena	= uop_opcode[3] & uop_trig;

-	assign mod_mul_ena	= uop_opcode[4] & uop_trig;

-	

-	

-		//

-		// uOP Source Value Decoding Logic

-		//

-	reg	[31: 0]	uop_src_a_value;

-	

-	always @(*)

-		//

-		case (uop_src_a)

-			UOP_SRC_PX:		uop_src_a_value = px_din;

-			UOP_SRC_PY:		uop_src_a_value = py_din;

-			UOP_SRC_PZ:		uop_src_a_value = pz_din;

-			

-			UOP_SRC_RX:		uop_src_a_value = rx_din;

-			UOP_SRC_RY:		uop_src_a_value = ry_din;

-			UOP_SRC_RZ:		uop_src_a_value = rz_din;

-			

-			UOP_SRC_T1:		uop_src_a_value = bram_t1_rd_data;

-			UOP_SRC_T2:		uop_src_a_value = bram_t2_rd_data;

-			UOP_SRC_T3:		uop_src_a_value = bram_t3_rd_data;

-			UOP_SRC_T4:		uop_src_a_value = bram_t4_rd_data;

-			

-			UOP_SRC_ONE:	uop_src_a_value = brom_one_dout;

-			UOP_SRC_ZERO:	uop_src_a_value = brom_zero_dout;

-			UOP_SRC_DELTA:	uop_src_a_value = brom_delta_dout;

-			

-			UOP_SRC_G_X:	uop_src_a_value = brom_g_x_dout;

-			UOP_SRC_G_Y:	uop_src_a_value = brom_g_y_dout;

-

-			UOP_SRC_H_X:	uop_src_a_value = brom_h_x_dout;

-			UOP_SRC_H_Y:	uop_src_a_value = brom_h_y_dout;

-			

-			UOP_SRC_V:		uop_src_a_value = v_din;

-			

-			default:			uop_src_a_value = {32{1'bX}};

-		endcase

-

-		

-	assign mw_cmp_din_x  = uop_src_a_value;

-	assign mw_mov_din_x  = uop_src_a_value;

-	assign mod_add_din_a = uop_src_a_value;

-	assign mod_sub_din_a = uop_src_a_value;

-	assign mod_mul_din_a = uop_src_a_value;

-	

-	reg	[31: 0]	uop_src_b_value;

-		

-	always @(*)

-		//

-		case (uop_src_b)

-			UOP_SRC_PX:		uop_src_b_value = px_din;

-			UOP_SRC_PY:		uop_src_b_value = py_din;

-			UOP_SRC_PZ:		uop_src_b_value = pz_din;

-			

-			UOP_SRC_RX:		uop_src_b_value = rx_din;

-			UOP_SRC_RY:		uop_src_b_value = ry_din;

-			UOP_SRC_RZ:		uop_src_b_value = rz_din;

-			

-			UOP_SRC_T1:		uop_src_b_value = bram_t1_rd_data;

-			UOP_SRC_T2:		uop_src_b_value = bram_t2_rd_data;

-			UOP_SRC_T3:		uop_src_b_value = bram_t3_rd_data;

-			UOP_SRC_T4:		uop_src_b_value = bram_t4_rd_data;

-			

-			UOP_SRC_ONE:	uop_src_b_value = brom_one_dout;

-			UOP_SRC_ZERO:	uop_src_b_value = brom_zero_dout;

-			UOP_SRC_DELTA:	uop_src_b_value = brom_delta_dout;

-

-			UOP_SRC_G_X:	uop_src_b_value = brom_g_x_dout;

-			UOP_SRC_G_Y:	uop_src_b_value = brom_g_y_dout;

-

-			UOP_SRC_H_X:	uop_src_b_value = brom_h_x_dout;

-			UOP_SRC_H_Y:	uop_src_b_value = brom_h_y_dout;

-			

-			UOP_SRC_V:		uop_src_b_value = v_din;

-			

-			default:			uop_src_b_value = {32{1'bX}};

-		endcase

-	

-	assign mw_cmp_din_y  = uop_src_b_value;

-	assign mod_add_din_b = uop_src_b_value;

-	assign mod_sub_din_b = uop_src_b_value;

-	assign mod_mul_din_b = uop_src_b_value;

-	

-	

-		//

-		// uOP Source & Destination Address Decoding Logic

-		//

-	reg	[WORD_COUNTER_WIDTH-1:0]	uop_src_a_addr;

-	reg	[WORD_COUNTER_WIDTH-1:0]	uop_src_b_addr;

-	reg	[WORD_COUNTER_WIDTH-1:0]	uop_dst_addr;

-	reg	[WORD_COUNTER_WIDTH-1:0]	uop_q_addr;

-	

-	assign q_addr = uop_q_addr;

-	

-	always @(*)

-		//

-		case (uop_opcode)

-			//

-			OPCODE_CMP:	begin

-				uop_src_a_addr = mw_cmp_addr_xy;

-				uop_src_b_addr = mw_cmp_addr_xy;

-				uop_dst_addr	= {WORD_COUNTER_WIDTH{1'bX}};

-				uop_q_addr		= {WORD_COUNTER_WIDTH{1'bX}};

-			end

-			//

-			OPCODE_MOV:	begin

-				uop_src_a_addr = mw_mov_addr_x;

-				uop_src_b_addr = {WORD_COUNTER_WIDTH{1'bX}};

-				uop_dst_addr	= mw_mov_addr_y;

-				uop_q_addr		= {WORD_COUNTER_WIDTH{1'bX}};

-			end

-			//

-			OPCODE_ADD:	begin

-				uop_src_a_addr = mod_add_addr_ab;

-				uop_src_b_addr = mod_add_addr_ab;

-				uop_dst_addr	= mod_add_addr_s;

-				uop_q_addr		= mod_add_addr_n;

-			end

-			//

-			OPCODE_SUB:	begin

-				uop_src_a_addr = mod_sub_addr_ab;

-				uop_src_b_addr = mod_sub_addr_ab;

-				uop_dst_addr	= mod_sub_addr_d;

-				uop_q_addr		= mod_sub_addr_n;

-			end

-			//

-			OPCODE_MUL:	begin

-				uop_src_a_addr = mod_mul_addr_a;

-				uop_src_b_addr = mod_mul_addr_b;

-				uop_dst_addr	= mod_mul_addr_p;

-				uop_q_addr		= mod_mul_addr_n;

-			end

-			//

-			default: begin

-				uop_src_a_addr = {WORD_COUNTER_WIDTH{1'bX}};

-				uop_src_b_addr = {WORD_COUNTER_WIDTH{1'bX}};

-				uop_dst_addr	= {WORD_COUNTER_WIDTH{1'bX}};

-				uop_q_addr		= {WORD_COUNTER_WIDTH{1'bX}};

-			end

-			//

-		endcase

-	

-	

-		//

-		// uOP Conditional Execution Logic

-		//

-	reg	uop_exec_effective;

-

-	always @(*)

-		//

-		case (uop_exec)

-			UOP_EXEC_ALWAYS:		uop_exec_effective = 1'b1;

-			UOP_EXEC_PZT1T2_0XX:	uop_exec_effective =  flag_pz_is_zero;

-			UOP_EXEC_PZT1T2_100:	uop_exec_effective = !flag_pz_is_zero && flag_t1_is_zero &&  flag_t2_is_zero;

-			UOP_EXEC_PZT1T2_101:	uop_exec_effective = !flag_pz_is_zero && flag_t1_is_zero && !flag_t2_is_zero;

-		endcase

-

-

-		//

-		// uOP Destination Store Logic

-		//

-	reg	uop_dst_wren;

-	

-	always @(*)

-		//

-		case (uop_opcode)

-			//

-			OPCODE_MOV:	uop_dst_wren = mw_mov_wren_y & uop_exec_effective;

-			OPCODE_ADD:	uop_dst_wren = mod_add_wren_s;

-			OPCODE_SUB:	uop_dst_wren = mod_sub_wren_d;

-			OPCODE_MUL:	uop_dst_wren = mod_mul_wren_p;

-			default:		uop_dst_wren = 1'b0;

-			//

-		endcase

-		

-	

-	always @(*) begin

-		//

-		//

-		//

-		if      (uop_src_a == UOP_SRC_PX) px_addr = uop_src_a_addr;

-		else if (uop_src_b == UOP_SRC_PX) px_addr = uop_src_b_addr;

-		else                              px_addr = {WORD_COUNTER_WIDTH{1'bX}};

-		//

-		if      (uop_src_a == UOP_SRC_PY) py_addr = uop_src_a_addr;

-		else if (uop_src_b == UOP_SRC_PY) py_addr = uop_src_b_addr;

-		else                              py_addr = {WORD_COUNTER_WIDTH{1'bX}};

-		//

-		if      (uop_src_a == UOP_SRC_PZ) pz_addr = uop_src_a_addr;

-		else if (uop_src_b == UOP_SRC_PZ) pz_addr = uop_src_b_addr;

-		else                              pz_addr = {WORD_COUNTER_WIDTH{1'bX}};

-		//

-		//

-		//

-		if      (uop_src_a == UOP_SRC_ONE)   brom_one_addr = uop_src_a_addr;

-		else if (uop_src_b == UOP_SRC_ONE)   brom_one_addr = uop_src_b_addr;

-		else                                 brom_one_addr = {WORD_COUNTER_WIDTH{1'bX}};

-		//

-		//if      (uop_src_a == UOP_SRC_ZERO)  brom_zero_addr = uop_src_a_addr;

-		//else if (uop_src_b == UOP_SRC_ZERO)  brom_zero_addr = uop_src_b_addr;

-		//else                                 brom_zero_addr = {WORD_COUNTER_WIDTH{1'bX}};

-		//

-		if      (uop_src_a == UOP_SRC_DELTA) brom_delta_addr = uop_src_a_addr;

-		else if (uop_src_b == UOP_SRC_DELTA) brom_delta_addr = uop_src_b_addr;

-		else                                 brom_delta_addr = {WORD_COUNTER_WIDTH{1'bX}};

-		//

-		//

-		//

-		if      (uop_src_a == UOP_SRC_G_X) brom_g_x_addr = uop_src_a_addr;

-		else if (uop_src_b == UOP_SRC_G_X) brom_g_x_addr = uop_src_b_addr;

-		else                               brom_g_x_addr = {WORD_COUNTER_WIDTH{1'bX}};

-		//

-		if      (uop_src_a == UOP_SRC_G_Y) brom_g_y_addr = uop_src_a_addr;

-		else if (uop_src_b == UOP_SRC_G_Y) brom_g_y_addr = uop_src_b_addr;

-		else                               brom_g_y_addr = {WORD_COUNTER_WIDTH{1'bX}};

-		//

-		//

-		//

-		if      (uop_src_a == UOP_SRC_H_X) brom_h_x_addr = uop_src_a_addr;

-		else if (uop_src_b == UOP_SRC_H_X) brom_h_x_addr = uop_src_b_addr;

-		else                               brom_h_x_addr = {WORD_COUNTER_WIDTH{1'bX}};

-		//

-		if      (uop_src_a == UOP_SRC_H_Y) brom_h_y_addr = uop_src_a_addr;

-		else if (uop_src_b == UOP_SRC_H_Y) brom_h_y_addr = uop_src_b_addr;

-		else                               brom_h_y_addr = {WORD_COUNTER_WIDTH{1'bX}};

-		//

-		//

-		//

-		if      (uop_src_a == UOP_SRC_V) v_addr = uop_src_a_addr;

-		else if (uop_src_b == UOP_SRC_V) v_addr = uop_src_b_addr;

-		else                             v_addr = {WORD_COUNTER_WIDTH{1'bX}};

-		//

-		//

-		//

-		if      (uop_src_a == UOP_SRC_T1) bram_t1_rd_addr = uop_src_a_addr;

-		else if (uop_src_b == UOP_SRC_T1) bram_t1_rd_addr = uop_src_b_addr;

-		else                              bram_t1_rd_addr = {WORD_COUNTER_WIDTH{1'bX}};

-		//

-		if      (uop_src_a == UOP_SRC_T2) bram_t2_rd_addr = uop_src_a_addr;

-		else if (uop_src_b == UOP_SRC_T2) bram_t2_rd_addr = uop_src_b_addr;

-		else                              bram_t2_rd_addr = {WORD_COUNTER_WIDTH{1'bX}};

-		//

-		if      (uop_src_a == UOP_SRC_T3) bram_t3_rd_addr = uop_src_a_addr;

-		else if (uop_src_b == UOP_SRC_T3) bram_t3_rd_addr = uop_src_b_addr;

-		else                              bram_t3_rd_addr = {WORD_COUNTER_WIDTH{1'bX}};

-		//

-		if      (uop_src_a == UOP_SRC_T4) bram_t4_rd_addr = uop_src_a_addr;

-		else if (uop_src_b == UOP_SRC_T4) bram_t4_rd_addr = uop_src_b_addr;

-		else                              bram_t4_rd_addr = {WORD_COUNTER_WIDTH{1'bX}};

-		//

-		//

-		//

-		if (uop_dst == UOP_DST_T1) bram_t1_wr_addr = uop_dst_addr;

-		else                       bram_t1_wr_addr = {WORD_COUNTER_WIDTH{1'bX}};

-		//

-		if (uop_dst == UOP_DST_T2) bram_t2_wr_addr = uop_dst_addr;

-		else                       bram_t2_wr_addr = {WORD_COUNTER_WIDTH{1'bX}};

-		//

-		if (uop_dst == UOP_DST_T3) bram_t3_wr_addr = uop_dst_addr;

-		else                       bram_t3_wr_addr = {WORD_COUNTER_WIDTH{1'bX}};

-		//

-		if (uop_dst == UOP_DST_T4) bram_t4_wr_addr = uop_dst_addr;

-		else                       bram_t4_wr_addr = {WORD_COUNTER_WIDTH{1'bX}};

-		//

-		//

-		//

-		if ((uop_dst == UOP_DST_RX) && (uop_dst_wren))	rx_addr = uop_dst_addr;

-		else begin

-			if      (uop_src_a == UOP_SRC_RX) 				rx_addr = uop_src_a_addr;

-			else if (uop_src_b == UOP_SRC_RX) 				rx_addr = uop_src_b_addr;

-			else                              				rx_addr = {WORD_COUNTER_WIDTH{1'bX}};

-		end

-		//

-		if ((uop_dst == UOP_DST_RY) && (uop_dst_wren))	ry_addr = uop_dst_addr;

-		else begin

-			if      (uop_src_a == UOP_SRC_RY) 				ry_addr = uop_src_a_addr;

-			else if (uop_src_b == UOP_SRC_RY) 				ry_addr = uop_src_b_addr;

-			else                              				ry_addr = {WORD_COUNTER_WIDTH{1'bX}};

-		end

-		//

-		if ((uop_dst == UOP_DST_RZ) && (uop_dst_wren))	rz_addr = uop_dst_addr;

-		else begin

-			if      (uop_src_a == UOP_SRC_RZ) 				rz_addr = uop_src_a_addr;

-			else if (uop_src_b == UOP_SRC_RZ) 				rz_addr = uop_src_b_addr;

-			else                              				rz_addr = {WORD_COUNTER_WIDTH{1'bX}};

-		end

-		//

-	end

-	

-	

-	assign rx_wren = uop_dst_wren && (uop_dst == UOP_DST_RX);

-	assign ry_wren = uop_dst_wren && (uop_dst == UOP_DST_RY);

-	assign rz_wren = uop_dst_wren && (uop_dst == UOP_DST_RZ);

-	

-	assign bram_t1_wr_en = uop_dst_wren && (uop_dst == UOP_DST_T1);

-	assign bram_t2_wr_en = uop_dst_wren && (uop_dst == UOP_DST_T2);

-	assign bram_t3_wr_en = uop_dst_wren && (uop_dst == UOP_DST_T3);

-	assign bram_t4_wr_en = uop_dst_wren && (uop_dst == UOP_DST_T4);

-	

-	

-	

-		//

-		// Destination Value Selector

-		//

-	reg	[31: 0]	uop_dst_value;

-	

-	always @(*)

-		//

-		case (uop_opcode)

-		

-			OPCODE_MOV:	uop_dst_value = mw_mov_dout_y;

-			OPCODE_ADD:	uop_dst_value = mod_add_dout_s;

-			OPCODE_SUB:	uop_dst_value = mod_sub_dout_d;

-			OPCODE_MUL:	uop_dst_value = mod_mul_dout_p;

-			

-			default:		uop_dst_value = {32{1'bX}};

-			

-		endcase

-	

-	assign rx_dout = uop_dst_value;

-	assign ry_dout = uop_dst_value;

-	assign rz_dout = uop_dst_value;

-	

-	assign bram_t1_wr_data = uop_dst_value;

-	assign bram_t2_wr_data = uop_dst_value;

-	assign bram_t3_wr_data = uop_dst_value;

-	assign bram_t4_wr_data = uop_dst_value;

-

-

-		//

-		// Latch Comparison Flags

-		//

-	always @(posedge clk)

-		//

-		if (	(fsm_state  == FSM_STATE_EXECUTE) &&

-				(uop_opcode == OPCODE_CMP)        &&

-				(uop_done && !uop_trig) ) begin

-			

-			if ( (uop_src_a == UOP_SRC_PZ) && (uop_src_b == UOP_SRC_ZERO) )

-				flag_pz_is_zero <= !mw_cmp_out_l && mw_cmp_out_e && !mw_cmp_out_g;

-				

-			if ( (uop_src_a == UOP_SRC_T1) && (uop_src_b == UOP_SRC_ZERO) )

-				flag_t1_is_zero <= !mw_cmp_out_l && mw_cmp_out_e && !mw_cmp_out_g;

-				

-			if ( (uop_src_a == UOP_SRC_T2) && (uop_src_b == UOP_SRC_ZERO) )

-				flag_t2_is_zero <= !mw_cmp_out_l && mw_cmp_out_e && !mw_cmp_out_g;

-				

-		end

-

-	

-		//

-		// Ready Flag Logic

-		//

-	reg rdy_reg = 1'b1;

-	assign rdy = rdy_reg;

-		

-	always @(posedge clk or negedge rst_n)

-		//

-		if (rst_n == 1'b0) rdy_reg <= 1'b1;

-		else begin

-			

-				/* clear flag */

-			if (fsm_state == FSM_STATE_STALL)

-				if (ena) rdy_reg <= 1'b0;

-			

-				/* set flag */

-			if ((fsm_state == FSM_STATE_EXECUTE) && !uop_trig && uop_done)

-				if (uop_opcode == OPCODE_RDY) rdy_reg <= 1'b1;

-				

-		end

-			

-	

-endmodule

-

-

-//------------------------------------------------------------------------------

-// End-of-File

-//------------------------------------------------------------------------------

diff --git a/rtl/curve/curve_mul_256.v b/rtl/curve/curve_mul_256.v
deleted file mode 100644
index 0ac2be0..0000000
--- a/rtl/curve/curve_mul_256.v
+++ /dev/null
@@ -1,720 +0,0 @@
-//------------------------------------------------------------------------------

-//

-// curve_mul_256.v

-// -----------------------------------------------------------------------------

-// Elliptic curve point scalar multiplier.

-//

-// Authors: Pavel Shatov

-//

-// Copyright (c) 2016, NORDUnet A/S

-//

-// Redistribution and use in source and binary forms, with or without

-// modification, are permitted provided that the following conditions are met:

-//

-// - Redistributions of source code must retain the above copyright notice,

-//   this list of conditions and the following disclaimer.

-//

-// - Redistributions in binary form must reproduce the above copyright notice,

-//   this list of conditions and the following disclaimer in the documentation

-//   and/or other materials provided with the distribution.

-//

-// - Neither the name of the NORDUnet nor the names of its contributors may be

-//   used to endorse or promote products derived from this software without

-//   specific prior written permission.

-//

-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"

-// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

-// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

-// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE

-// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

-// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

-// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

-// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN

-// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

-// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

-// POSSIBILITY OF SUCH DAMAGE.

-//

-//------------------------------------------------------------------------------

-

-module curve_mul_256

-	(

-		clk, rst_n,

-		ena, rdy,

-		k_addr, rx_addr, ry_addr,

-		rx_wren, ry_wren,

-		k_din,

-		rx_dout, ry_dout

-	);

-	

-

-		//

-		// Constants

-		//

-	localparam	WORD_COUNTER_WIDTH	= 3;	// 0 .. 7

-	localparam	OPERAND_NUM_WORDS		= 8;	// 8 * 32 = 256

-

-	

-		//

-		// Ports

-		//

-	input		wire	clk;		// system clock

-	input		wire	rst_n;	// active-low async reset

-	

-	input		wire	ena;		// enable input

-	output	wire	rdy;		// ready output

-				

-	output	wire	[ 2: 0]	k_addr;

-	output	wire	[ 2: 0]	rx_addr;

-	output	wire	[ 2: 0]	ry_addr;

-		

-	output	wire				rx_wren;

-	output	wire				ry_wren;

-

-	input		wire	[31: 0]	k_din;

-

-	output	wire	[31: 0]	rx_dout;

-	output	wire	[31: 0]	ry_dout;

-	

-

-		//

-		// Temporary Variables

-		//

-	reg	[ 2: 0]	bram_tx_wr_addr;

-	reg	[ 2: 0]	bram_ty_wr_addr;

-	reg	[ 2: 0]	bram_tz_wr_addr;

-	

-	reg	[ 2: 0]	bram_rx_wr_addr;

-	reg	[ 2: 0]	bram_ry_wr_addr;

-	reg	[ 2: 0]	bram_rz_wr_addr;

-	wire	[ 2: 0]	bram_rz1_wr_addr;

-	

-	reg	[ 2: 0]	bram_tx_rd_addr;

-	reg	[ 2: 0]	bram_ty_rd_addr;

-	reg	[ 2: 0]	bram_tz_rd_addr;

-	

-	reg	[ 2: 0]	bram_rx_rd_addr;

-	reg	[ 2: 0]	bram_ry_rd_addr;

-	reg	[ 2: 0]	bram_rz_rd_addr;

-	wire	[ 2: 0]	bram_rz1_rd_addr;

-	

-	reg				bram_tx_wr_en;

-	reg				bram_ty_wr_en;

-	reg				bram_tz_wr_en;

-

-	reg				bram_rx_wr_en;

-	reg				bram_ry_wr_en;

-	reg				bram_rz_wr_en;

-	wire				bram_rz1_wr_en;

-	

-	wire	[31: 0]	bram_tx_rd_data;

-	wire	[31: 0]	bram_ty_rd_data;

-	wire	[31: 0]	bram_tz_rd_data;	

-

-	wire	[31: 0]	bram_rx_rd_data;

-	wire	[31: 0]	bram_ry_rd_data;

-	wire	[31: 0]	bram_rz_rd_data;

-	wire	[31: 0]	bram_rz1_rd_data;

-	

-	reg	[31: 0]	bram_tx_wr_data_in;

-	reg	[31: 0]	bram_ty_wr_data_in;

-	reg	[31: 0]	bram_tz_wr_data_in;

-

-	reg	[31: 0]	bram_rx_wr_data_in;

-	reg	[31: 0]	bram_ry_wr_data_in;

-	reg	[31: 0]	bram_rz_wr_data_in;

-	wire	[31: 0]	bram_rz1_wr_data_in;

-	

-	wire	[31: 0]	bram_tx_wr_data_out;

-	wire	[31: 0]	bram_ty_wr_data_out;

-	wire	[31: 0]	bram_tz_wr_data_out;

-	

-	wire	[31: 0]	bram_rx_wr_data_out;

-	wire	[31: 0]	bram_ry_wr_data_out;

-	wire	[31: 0]	bram_rz_wr_data_out;

-		

-	bram_1rw_1ro_readfirst # (.MEM_WIDTH(32), .MEM_ADDR_BITS(3))

-	bram_tx (.clk(clk),

-		.a_addr(bram_tx_wr_addr), .a_wr(bram_tx_wr_en), .a_in(bram_tx_wr_data_in), .a_out(bram_tx_wr_data_out),

-		.b_addr(bram_tx_rd_addr),                                                  .b_out(bram_tx_rd_data));

-	

-	bram_1rw_1ro_readfirst # (.MEM_WIDTH(32), .MEM_ADDR_BITS(3))

-	bram_ty (.clk(clk),

-		.a_addr(bram_ty_wr_addr), .a_wr(bram_ty_wr_en), .a_in(bram_ty_wr_data_in), .a_out(bram_ty_wr_data_out),

-		.b_addr(bram_ty_rd_addr),                                                  .b_out(bram_ty_rd_data));

-

-	bram_1rw_1ro_readfirst # (.MEM_WIDTH(32), .MEM_ADDR_BITS(3))

-	bram_tz (.clk(clk),

-		.a_addr(bram_tz_wr_addr), .a_wr(bram_tz_wr_en), .a_in(bram_tz_wr_data_in), .a_out(bram_tz_wr_data_out),

-		.b_addr(bram_tz_rd_addr),                                                  .b_out(bram_tz_rd_data));

-	

-	bram_1rw_1ro_readfirst # (.MEM_WIDTH(32), .MEM_ADDR_BITS(3))

-	bram_rx (.clk(clk),

-		.a_addr(bram_rx_wr_addr), .a_wr(bram_rx_wr_en), .a_in(bram_rx_wr_data_in), .a_out(bram_rx_wr_data_out),

-		.b_addr(bram_rx_rd_addr),                                                  .b_out(bram_rx_rd_data));

-	

-	bram_1rw_1ro_readfirst # (.MEM_WIDTH(32), .MEM_ADDR_BITS(3))

-	bram_ry (.clk(clk),

-		.a_addr(bram_ry_wr_addr), .a_wr(bram_ry_wr_en), .a_in(bram_ry_wr_data_in), .a_out(bram_ry_wr_data_out),

-		.b_addr(bram_ry_rd_addr),                                                  .b_out(bram_ry_rd_data));

-

-	bram_1rw_1ro_readfirst # (.MEM_WIDTH(32), .MEM_ADDR_BITS(3))

-	bram_rz (.clk(clk),

-		.a_addr(bram_rz_wr_addr), .a_wr(bram_rz_wr_en), .a_in(bram_rz_wr_data_in), .a_out(bram_rz_wr_data_out),

-		.b_addr(bram_rz_rd_addr),                                                  .b_out(bram_rz_rd_data));

-		

-	bram_1rw_1ro_readfirst # (.MEM_WIDTH(32), .MEM_ADDR_BITS(3))

-	bram_rz1 (.clk(clk),

-		.a_addr(bram_rz1_wr_addr), .a_wr(bram_rz1_wr_en), .a_in(bram_rz1_wr_data_in), .a_out(),

-		.b_addr(bram_rz1_rd_addr),                                                    .b_out(bram_rz1_rd_data));

-

-

-		//

-		// FSM

-		//

-	localparam	[ 3: 0]	FSM_STATE_IDLE				= 4'd00;

-	localparam	[ 3: 0]	FSM_STATE_PREPARE_TRIG	= 4'd01;

-	localparam	[ 3: 0]	FSM_STATE_PREPARE_WAIT	= 4'd02;

-	localparam	[ 3: 0]	FSM_STATE_DOUBLE_TRIG	= 4'd03;

-	localparam	[ 3: 0]	FSM_STATE_DOUBLE_WAIT	= 4'd04;

-	localparam	[ 3: 0]	FSM_STATE_ADD_TRIG		= 4'd05;

-	localparam	[ 3: 0]	FSM_STATE_ADD_WAIT		= 4'd06;

-	localparam	[ 3: 0]	FSM_STATE_COPY_TRIG		= 4'd07;

-	localparam	[ 3: 0]	FSM_STATE_COPY_WAIT		= 4'd08;

-	localparam	[ 3: 0]	FSM_STATE_INVERT_TRIG	= 4'd09;

-	localparam	[ 3: 0]	FSM_STATE_INVERT_WAIT	= 4'd10;

-	localparam	[ 3: 0]	FSM_STATE_CONVERT_TRIG	= 4'd11;

-	localparam	[ 3: 0]	FSM_STATE_CONVERT_WAIT	= 4'd12;

-	localparam	[ 3: 0]	FSM_STATE_DONE				= 4'd13;

-	

-	reg [3:0] fsm_state = FSM_STATE_IDLE;

-	
-

-		//
-		// Round Counter
-		//
-	reg	[ 7: 0]	bit_counter;
-	wire	[ 7: 0]	bit_counter_max = 8'd255;
-	wire	[ 7: 0]	bit_counter_zero = 8'd0;
-	wire	[ 7: 0]	bit_counter_next =
-		(bit_counter < bit_counter_max) ? bit_counter + 1'b1 : bit_counter_zero;

-		

-		

-		//

-		// Round Completion

-		//

-	wire [ 3: 0]	fsm_state_round_next = (bit_counter < bit_counter_max) ?
-		FSM_STATE_DOUBLE_TRIG : FSM_STATE_INVERT_TRIG;

-		
-

-		//

-		// OP Trigger Logic

-		//

-	reg	op_trig;

-	wire	op_done;

-	

-	always @(posedge clk or negedge rst_n)

-		//

-		if (rst_n == 1'b0)	op_trig <= 1'b0;

-		else						op_trig <=	(fsm_state == FSM_STATE_PREPARE_TRIG) ||

-													(fsm_state == FSM_STATE_DOUBLE_TRIG) ||

-													(fsm_state == FSM_STATE_ADD_TRIG) ||

-													(fsm_state == FSM_STATE_CONVERT_TRIG);

-		

-		//

-		// Microprograms

-		//

-	wire	[ 5: 0]	op_rom_addr;

-	wire	[19: 0]	op_rom_init_data;

-	wire	[19: 0]	op_rom_dbl_data;

-	wire	[19: 0]	op_rom_add_data;

-	wire	[19: 0]	op_rom_conv_data;

-	reg	[19: 0]	op_rom_mux_data;

-

-	(* RAM_STYLE="BLOCK" *)

-	uop_init_rom op_rom_init
-	(
-		.clk	(clk),
-		.addr	(op_rom_addr),
-		.data	(op_rom_init_data)

-	);

-	

-	(* RAM_STYLE="BLOCK" *)

-	uop_dbl_rom op_rom_dbl
-	(
-		.clk	(clk),
-		.addr	(op_rom_addr),
-		.data	(op_rom_dbl_data)

-	);

-

-	(* RAM_STYLE="BLOCK" *)

-	uop_add_rom op_rom_add
-	(
-		.clk	(clk),
-		.addr	(op_rom_addr),
-		.data	(op_rom_add_data)

-	);

-	

-	(* RAM_STYLE="BLOCK" *)

-	uop_conv_rom op_rom_conv
-	(
-		.clk	(clk),
-		.addr	(op_rom_addr),
-		.data	(op_rom_conv_data)

-	);

-	

-	always @(*)

-		//

-		case (fsm_state)

-			FSM_STATE_PREPARE_WAIT:	op_rom_mux_data = op_rom_init_data;

-			FSM_STATE_DOUBLE_WAIT:	op_rom_mux_data = op_rom_dbl_data;

-			FSM_STATE_ADD_WAIT:		op_rom_mux_data = op_rom_add_data;

-			FSM_STATE_CONVERT_WAIT:	op_rom_mux_data = op_rom_conv_data;

-			default:						op_rom_mux_data = {20{1'bX}};

-		endcase

-

-

-	

-		//

-		// Modulus

-		//

-	reg	[ 2: 0]	rom_q_addr;

-	wire	[31: 0]	rom_q_data;

-	

-	brom_p256_q rom_q
-   (
-		.clk		(clk),
-		.b_addr	(rom_q_addr),
-		.b_out	(rom_q_data)
-    );

-

-

-		//

-		// Worker

-		//

-	wire	[ 2: 0]	worker_addr_px;

-	wire	[ 2: 0]	worker_addr_py;

-	wire	[ 2: 0]	worker_addr_pz;

-	

-	wire	[ 2: 0]	worker_addr_rx;

-	wire	[ 2: 0]	worker_addr_ry;

-	wire	[ 2: 0]	worker_addr_rz;

-

-	wire	[ 2: 0]	worker_addr_q;

-	

-	wire				worker_wren_rx;

-	wire				worker_wren_ry;

-	wire				worker_wren_rz;

-	

-	reg	[31: 0]	worker_din_px;

-	reg	[31: 0]	worker_din_py;

-	reg	[31: 0]	worker_din_pz;

-	

-	reg	[31: 0]	worker_din_rx;

-	reg	[31: 0]	worker_din_ry;

-	reg	[31: 0]	worker_din_rz;

-	

-	wire	[31: 0]	worker_dout_rx;

-	wire	[31: 0]	worker_dout_ry;

-	wire	[31: 0]	worker_dout_rz;

-	

-	curve_dbl_add_256 worker
-	(
-		.clk			(clk),

-		.rst_n		(rst_n),

-		
-		.ena			(op_trig),

-		.rdy			(op_done),

-		
-		.uop_addr	(op_rom_addr),

-		.uop			(op_rom_mux_data),

-		
-		.px_addr		(worker_addr_px),

-		.py_addr		(worker_addr_py),

-		.pz_addr		(worker_addr_pz),

-		

-		.rx_addr		(worker_addr_rx),

-		.ry_addr		(worker_addr_ry),

-		.rz_addr		(worker_addr_rz),

-		

-		.q_addr		(worker_addr_q),

-		

-		.v_addr		(bram_rz1_rd_addr),

-		
-		.rx_wren		(worker_wren_rx),

-		.ry_wren		(worker_wren_ry),

-		.rz_wren		(worker_wren_rz),

-		
-		.px_din		(worker_din_px),

-		.py_din		(worker_din_py),

-		.pz_din		(worker_din_pz),

-		
-		.rx_din		(worker_din_rx),

-		.ry_din		(worker_din_ry),

-		.rz_din		(worker_din_rz),

-		
-		.rx_dout		(worker_dout_rx),

-		.ry_dout		(worker_dout_ry),

-		.rz_dout		(worker_dout_rz),

-		

-		.q_din		(rom_q_data),

-		

-		.v_din		(bram_rz1_rd_data)
-	);

-

-	

-		//

-		// Mover

-		//

-	reg	move_trig;

-	wire	move_done;

-	

-	wire	[ 2: 0]	mover_addr_x;

-	wire	[ 2: 0]	mover_addr_y;

-	

-	wire				mover_wren_y;

-	

-	always @(posedge clk or negedge rst_n)

-		//

-		if (rst_n == 1'b0)	move_trig <= 1'b0;

-		else						move_trig <= (fsm_state == FSM_STATE_COPY_TRIG);

-

-	mw_mover #

-	(

-		.WORD_COUNTER_WIDTH	(3),

-		.OPERAND_NUM_WORDS	(8)

-	)

-	mover

-	(

-		.clk		(clk),

-		.rst_n	(rst_n),

-		

-		.ena		(move_trig),

-		.rdy		(move_done),

-		

-		.x_addr	(mover_addr_x),

-		.y_addr	(mover_addr_y),

-		.y_wren	(mover_wren_y),

-		

-		.x_din	({32{1'bX}}),

-		.y_dout	()

-	);

-

-

-		//

-		// Invertor

-		//

-	reg	invert_trig;

-	wire	invert_done;

-

-	wire	[ 2: 0]	invertor_addr_a;

-	wire	[ 2: 0]	invertor_addr_q;

-

-	always @(posedge clk or negedge rst_n)

-		//

-		if (rst_n == 1'b0)	invert_trig <= 1'b0;

-		else						invert_trig <= (fsm_state == FSM_STATE_INVERT_TRIG);

-	

-	modular_invertor #

-	(

-		.MAX_OPERAND_WIDTH(256)

-	)

-	invertor

-	(

-		.clk			(clk),

-		.rst_n		(rst_n),

-		

-		.ena			(invert_trig),

-		.rdy			(invert_done),

-		

-		.a_addr		(invertor_addr_a),

-		.q_addr		(invertor_addr_q),

-		.a1_addr		(bram_rz1_wr_addr),

-		.a1_wren		(bram_rz1_wr_en),

-		
-		.a_din		(bram_rz_rd_data),

-		.q_din		(rom_q_data),

-		.a1_dout		(bram_rz1_wr_data_in)

-	);

-	

-	

-		//

-		// FSM Transition Logic

-		//

-	always @(posedge clk or negedge rst_n)

-		//

-		if (rst_n == 1'b0)			fsm_state <= FSM_STATE_IDLE;

-		else case (fsm_state)

-		

-			FSM_STATE_IDLE:			fsm_state <= ena ? FSM_STATE_PREPARE_TRIG : FSM_STATE_IDLE;

-			

-			FSM_STATE_PREPARE_TRIG:	fsm_state <= FSM_STATE_PREPARE_WAIT;

-			FSM_STATE_PREPARE_WAIT:	fsm_state <= (!op_trig && op_done) ? FSM_STATE_DOUBLE_TRIG : FSM_STATE_PREPARE_WAIT;

-			

-			FSM_STATE_DOUBLE_TRIG:	fsm_state <= FSM_STATE_DOUBLE_WAIT;

-			FSM_STATE_DOUBLE_WAIT:	fsm_state <= (!op_trig && op_done) ? FSM_STATE_ADD_TRIG : FSM_STATE_DOUBLE_WAIT;

-			

-			FSM_STATE_ADD_TRIG:		fsm_state <= FSM_STATE_ADD_WAIT;

-			FSM_STATE_ADD_WAIT:		fsm_state <= (!op_trig && op_done) ? FSM_STATE_COPY_TRIG : FSM_STATE_ADD_WAIT;

-			

-			FSM_STATE_COPY_TRIG:		fsm_state <= FSM_STATE_COPY_WAIT;

-			FSM_STATE_COPY_WAIT:		fsm_state <= (!move_trig && move_done) ? fsm_state_round_next : FSM_STATE_COPY_WAIT;

-			

-			FSM_STATE_INVERT_TRIG:	fsm_state <= FSM_STATE_INVERT_WAIT;

-			FSM_STATE_INVERT_WAIT:	fsm_state <= (!invert_trig && invert_done) ? FSM_STATE_CONVERT_TRIG : FSM_STATE_INVERT_WAIT;

-			

-			FSM_STATE_CONVERT_TRIG:	fsm_state <= FSM_STATE_CONVERT_WAIT;

-			FSM_STATE_CONVERT_WAIT:	fsm_state <= (!op_trig && op_done) ? FSM_STATE_DONE : FSM_STATE_CONVERT_WAIT;

-			

-			FSM_STATE_DONE:			fsm_state <= FSM_STATE_IDLE;

-			

-			default:						fsm_state <= FSM_STATE_IDLE;

-					

-		endcase

-	

-	

-		//
-		// Bit Counter Increment
-		//
-	always @(posedge clk) begin
-		//
-		if ((fsm_state == FSM_STATE_PREPARE_WAIT) && !op_trig && op_done)
-			bit_counter <= bit_counter_zero;
-		//	
-		if ((fsm_state == FSM_STATE_COPY_WAIT) && !move_trig && move_done)
-			bit_counter <= bit_counter_next;
-		//
-	end

-

-

-		//

-		// K Latch Logic

-		//

-	reg	[ 2: 0]	k_addr_reg;

-	reg	[31: 0]	k_din_reg;

-	

-	assign k_addr = k_addr_reg;

-	

-	always @(posedge clk) begin

-		//

-		if (fsm_state == FSM_STATE_DOUBLE_TRIG)

-			k_addr_reg <= 3'd7 - bit_counter[7:5];

-		//

-		if (fsm_state == FSM_STATE_ADD_TRIG)

-			k_din_reg <= (bit_counter[4:0] == 5'd0) ? k_din : {k_din_reg[30:0], 1'bX};

-		//

-	end

-			

-		

-		

-		//

-		// Copy Inhibit Logic

-		//

-	wire	move_inhibit = k_din_reg[31];

-	

-	wire	copy_t2r_int = mover_wren_y & ~move_inhibit;

-		

-	

-	always @(*) begin

-		//

-		// Q

-		//

-		case (fsm_state)

-			FSM_STATE_DOUBLE_WAIT:	rom_q_addr = worker_addr_q;

-			FSM_STATE_ADD_WAIT:		rom_q_addr = worker_addr_q;

-			FSM_STATE_INVERT_WAIT:	rom_q_addr = invertor_addr_q;

-			FSM_STATE_CONVERT_WAIT:	rom_q_addr = worker_addr_q;

-			default:						rom_q_addr = worker_addr_q;

-		endcase

-			

-		//

-		// R(X,Y,Z)

-		//

-		case (fsm_state)

-			//

-			FSM_STATE_PREPARE_WAIT: begin

-				//

-				bram_rx_rd_addr    <= {3{1'bX}};      bram_ry_rd_addr    <= {3{1'bX}};      bram_rz_rd_addr    <= {3{1'bX}};

-				bram_rx_wr_addr    <= worker_addr_rx; bram_ry_wr_addr    <= worker_addr_ry; bram_rz_wr_addr    <= worker_addr_rz;

-				bram_rx_wr_en      <= worker_wren_rx; bram_ry_wr_en      <= worker_wren_ry; bram_rz_wr_en      <= worker_wren_rz;

-				bram_rx_wr_data_in <= worker_dout_rx; bram_ry_wr_data_in <= worker_dout_ry; bram_rz_wr_data_in <= worker_dout_rz;

-				//

-			end

-			//

-			FSM_STATE_DOUBLE_WAIT: begin

-				//

-				bram_rx_rd_addr    <= worker_addr_px; bram_ry_rd_addr    <= worker_addr_py; bram_rz_rd_addr    <= worker_addr_pz;

-				bram_rx_wr_addr    <= {3{1'bX}};      bram_ry_wr_addr    <= {3{1'bX}};      bram_rz_wr_addr    <= {3{1'bX}};

-				bram_rx_wr_en      <= 1'b0;           bram_ry_wr_en      <= 1'b0;           bram_rz_wr_en      <= 1'b0;

-				bram_rx_wr_data_in <= {32{1'bX}};     bram_ry_wr_data_in <= {32{1'bX}};     bram_rz_wr_data_in <= {32{1'bX}};

-				//

-			end

-			//

-			FSM_STATE_ADD_WAIT: begin

-				//

-				bram_rx_rd_addr    <= {3{1'bX}};      bram_ry_rd_addr    <= {3{1'bX}};      bram_rz_rd_addr    <= {3{1'bX}};

-				bram_rx_wr_addr    <= worker_addr_rx; bram_ry_wr_addr    <= worker_addr_ry; bram_rz_wr_addr    <= worker_addr_rz;

-				bram_rx_wr_en      <= worker_wren_rx; bram_ry_wr_en      <= worker_wren_ry; bram_rz_wr_en      <= worker_wren_rz;

-				bram_rx_wr_data_in <= worker_dout_rx; bram_ry_wr_data_in <= worker_dout_ry; bram_rz_wr_data_in <= worker_dout_rz;

-				//

-			end

-			//

-			FSM_STATE_COPY_WAIT: begin

-				//

-				bram_rx_rd_addr    <= {3{1'bX}};       bram_ry_rd_addr    <= {3{1'bX}};       bram_rz_rd_addr    <= {3{1'bX}};

-				bram_rx_wr_addr    <= mover_addr_y;    bram_ry_wr_addr    <= mover_addr_y;    bram_rz_wr_addr    <= mover_addr_y;

-				bram_rx_wr_en      <= copy_t2r_int;    bram_ry_wr_en      <= copy_t2r_int;    bram_rz_wr_en      <= copy_t2r_int;

-				bram_rx_wr_data_in <= bram_tx_rd_data; bram_ry_wr_data_in <= bram_ty_rd_data; bram_rz_wr_data_in <= bram_tz_rd_data;

-				//

-			end

-			//

-			FSM_STATE_INVERT_WAIT: begin

-				//

-				bram_rx_rd_addr    <= {3{1'bX}};  bram_ry_rd_addr    <= {3{1'bX}};  bram_rz_rd_addr    <= invertor_addr_a;

-				bram_rx_wr_addr    <= {3{1'bX}};  bram_ry_wr_addr    <= {3{1'bX}};  bram_rz_wr_addr    <= {3{1'bX}};

-				bram_rx_wr_en      <= 1'b0;       bram_ry_wr_en      <= 1'b0;       bram_rz_wr_en      <= 1'b0;

-				bram_rx_wr_data_in <= {32{1'bX}}; bram_ry_wr_data_in <= {32{1'bX}}; bram_rz_wr_data_in <= {32{1'bX}};

-				//

-			end

-			//

-			FSM_STATE_CONVERT_WAIT: begin

-				//

-				bram_rx_rd_addr    <= worker_addr_px; bram_ry_rd_addr    <= worker_addr_py; bram_rz_rd_addr    <= worker_addr_pz;

-				bram_rx_wr_addr    <= {3{1'bX}};      bram_ry_wr_addr    <= {3{1'bX}};      bram_rz_wr_addr    <= {3{1'bX}};

-				bram_rx_wr_en      <= 1'b0;           bram_ry_wr_en      <= 1'b0;           bram_rz_wr_en      <= 1'b0;

-				bram_rx_wr_data_in <= {32{1'bX}};     bram_ry_wr_data_in <= {32{1'bX}};     bram_rz_wr_data_in <= {32{1'bX}};

-				//

-			end

-

-			//

-			default: begin

-				//

-				bram_rx_rd_addr    <= {3{1'bX}};  bram_ry_rd_addr    <= {3{1'bX}};  bram_rz_rd_addr    <= {3{1'bX}};

-				bram_rx_wr_addr    <= {3{1'bX}};  bram_ry_wr_addr    <= {3{1'bX}};  bram_rz_wr_addr    <= {3{1'bX}};

-				bram_rx_wr_en      <= 1'b0;       bram_ry_wr_en      <= 1'b0;       bram_rz_wr_en      <= 1'b0;

-				bram_rx_wr_data_in <= {32{1'bX}}; bram_ry_wr_data_in <= {32{1'bX}}; bram_rz_wr_data_in <= {32{1'bX}};

-				//

-			end

-			//

-		endcase

-		//

-		// T(X,Y,Z)

-		//

-		case (fsm_state)

-			//

-			FSM_STATE_DOUBLE_WAIT: begin

-				//

-				bram_tx_rd_addr    <= {3{1'bX}};      bram_ty_rd_addr    <= {3{1'bX}};      bram_tz_rd_addr    <= {3{1'bX}};

-				bram_tx_wr_addr    <= worker_addr_rx; bram_ty_wr_addr    <= worker_addr_ry; bram_tz_wr_addr    <= worker_addr_rz;

-				bram_tx_wr_en      <= worker_wren_rx; bram_ty_wr_en      <= worker_wren_ry; bram_tz_wr_en      <= worker_wren_rz;

-				bram_tx_wr_data_in <= worker_dout_rx; bram_ty_wr_data_in <= worker_dout_ry; bram_tz_wr_data_in <= worker_dout_rz;

-				//

-			end

-			//

-			FSM_STATE_ADD_WAIT: begin

-				//

-				bram_tx_rd_addr    <= worker_addr_px; bram_ty_rd_addr    <= worker_addr_py; bram_tz_rd_addr    <= worker_addr_pz;

-				bram_tx_wr_addr    <= {3{1'bX}};      bram_ty_wr_addr    <= {3{1'bX}};      bram_tz_wr_addr    <= {3{1'bX}};

-				bram_tx_wr_en      <= 1'b0;           bram_ty_wr_en      <= 1'b0;           bram_tz_wr_en      <= 1'b0;

-				bram_tx_wr_data_in <= {32{1'bX}};     bram_ty_wr_data_in <= {32{1'bX}};     bram_tz_wr_data_in <= {32{1'bX}};

-				//

-			end

-			//

-			FSM_STATE_COPY_WAIT: begin

-				//

-				bram_tx_rd_addr    <= mover_addr_x; bram_ty_rd_addr    <= mover_addr_x; bram_tz_rd_addr    <= mover_addr_x;

-				bram_tx_wr_addr    <= {3{1'bX}};    bram_ty_wr_addr    <= {3{1'bX}};    bram_tz_wr_addr    <= {3{1'bX}};

-				bram_tx_wr_en      <= 1'b0;         bram_ty_wr_en      <= 1'b0;         bram_tz_wr_en      <= 1'b0;

-				bram_tx_wr_data_in <= {32{1'bX}};   bram_ty_wr_data_in <= {32{1'bX}};   bram_tz_wr_data_in <= {32{1'bX}};

-				//

-			end

-			

-			//

-			default: begin

-				//

-				bram_tx_rd_addr    <= {3{1'bX}};  bram_ty_rd_addr    <= {3{1'bX}};  bram_tz_rd_addr    <= {3{1'bX}};

-				bram_tx_wr_addr    <= {3{1'bX}};  bram_ty_wr_addr    <= {3{1'bX}};  bram_tz_wr_addr    <= {3{1'bX}};

-				bram_tx_wr_en      <= 1'b0;       bram_ty_wr_en      <= 1'b0;       bram_tz_wr_en      <= 1'b0;

-				bram_tx_wr_data_in <= {32{1'bX}}; bram_ty_wr_data_in <= {32{1'bX}}; bram_tz_wr_data_in <= {32{1'bX}};

-				//

-			end

-			//

-		endcase

-		//

-		// Worker

-		//

-		case (fsm_state)

-			//

-			FSM_STATE_DOUBLE_WAIT: begin

-				//

-				worker_din_px <= bram_rx_rd_data;     worker_din_py <= bram_ry_rd_data;     worker_din_pz <= bram_rz_rd_data;

-				worker_din_rx <= bram_tx_wr_data_out; worker_din_ry <= bram_ty_wr_data_out; worker_din_rz <= bram_tz_wr_data_out;

-				//

-			end

-			//

-			FSM_STATE_ADD_WAIT: begin

-				//

-				worker_din_px <= bram_tx_rd_data;     worker_din_py <= bram_ty_rd_data;     worker_din_pz <= bram_tz_rd_data;

-				worker_din_rx <= bram_rx_wr_data_out; worker_din_ry <= bram_ry_wr_data_out; worker_din_rz <= bram_rz_wr_data_out;

-				//

-			end

-			//

-			FSM_STATE_CONVERT_WAIT: begin

-				//

-				worker_din_px <= bram_rx_rd_data; worker_din_py <= bram_ry_rd_data; worker_din_pz <= bram_rz_rd_data;

-				worker_din_rx <= {32{1'bX}};      worker_din_ry <= {32{1'bX}};      worker_din_rz <= {32{1'bX}};

-				//

-			end

-			//

-			default: begin

-				//

-				worker_din_px <= {32{1'bX}}; worker_din_py <= {32{1'bX}}; worker_din_pz <= {32{1'bX}};

-				worker_din_rx <= {32{1'bX}}; worker_din_ry <= {32{1'bX}}; worker_din_rz <= {32{1'bX}};

-				//

-			end

-			//

-		endcase

-		//

-	end

-

-

-		//

-		// Output Mapping

-		//

-	assign	rx_wren = worker_wren_rx && (fsm_state == FSM_STATE_CONVERT_WAIT);

-	assign	ry_wren = worker_wren_ry && (fsm_state == FSM_STATE_CONVERT_WAIT);

-

-	assign	rx_dout = worker_dout_rx;

-	assign	ry_dout = worker_dout_ry;

-	

-	assign	rx_addr = worker_addr_rx;

-	assign	ry_addr = worker_addr_ry;

-

-	

-		//

-		// Ready Flag Logic

-		//

-	reg rdy_reg = 1'b1;

-	assign rdy = rdy_reg;

-		

-	always @(posedge clk or negedge rst_n)

-		

-		if (rst_n == 1'b0) rdy_reg <= 1'b1;

-		else begin

-			

-				/* clear flag */

-			if ((fsm_state == FSM_STATE_IDLE) && ena)

-				rdy_reg <= 1'b0;

-			

-				/* set flag */

-			if (fsm_state == FSM_STATE_DONE)

-				rdy_reg <= 1'b1;

-				

-		end

-			

-	

-endmodule

-

-

-//------------------------------------------------------------------------------

-// End-of-File

-//------------------------------------------------------------------------------

diff --git a/rtl/curve/rom/brom_p256_delta.v b/rtl/curve/rom/brom_p256_delta.v
deleted file mode 100644
index b9a345a..0000000
--- a/rtl/curve/rom/brom_p256_delta.v
+++ /dev/null
@@ -1,68 +0,0 @@
-//======================================================================
-//
-// Copyright (c) 2016, NORDUnet A/S All rights reserved.
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions
-// are met:
-// - Redistributions of source code must retain the above copyright
-//   notice, this list of conditions and the following disclaimer.
-//
-// - Redistributions in binary form must reproduce the above copyright
-//   notice, this list of conditions and the following disclaimer in the
-//   documentation and/or other materials provided with the distribution.
-//
-// - Neither the name of the NORDUnet nor the names of its contributors may
-//   be used to endorse or promote products derived from this software
-//   without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
-// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
-// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
-// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
-// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-//
-//======================================================================
-
-`timescale 1ns / 1ps
-
-module brom_p256_delta
-   (
-		input		wire				clk,
-		input		wire	[ 3-1:0]	b_addr,
-		output	wire	[32-1:0]	b_out
-    );
-
-
-   //
-   // Output Registers
-   //
-   reg [31:0] bram_reg_b;
-
-   assign b_out = bram_reg_b;
-
-
-   //
-   // Read-Only Port B
-	//
-	always @(posedge clk)
-		//

-		case (b_addr)

-			3'b000:	bram_reg_b <= 32'h00000000;

-			3'b001:	bram_reg_b <= 32'h00000000;

-			3'b010:	bram_reg_b <= 32'h80000000;

-			3'b011:	bram_reg_b <= 32'h00000000;

-			3'b100:	bram_reg_b <= 32'h00000000;

-			3'b101:	bram_reg_b <= 32'h80000000;

-			3'b110:	bram_reg_b <= 32'h80000000;

-			3'b111:	bram_reg_b <= 32'h7fffffff;

-		endcase
-
-
-endmodule
diff --git a/rtl/curve/rom/brom_p256_g_x.v b/rtl/curve/rom/brom_p256_g_x.v
deleted file mode 100644
index 0816ef6..0000000
--- a/rtl/curve/rom/brom_p256_g_x.v
+++ /dev/null
@@ -1,68 +0,0 @@
-//======================================================================
-//
-// Copyright (c) 2016, NORDUnet A/S All rights reserved.
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions
-// are met:
-// - Redistributions of source code must retain the above copyright
-//   notice, this list of conditions and the following disclaimer.
-//
-// - Redistributions in binary form must reproduce the above copyright
-//   notice, this list of conditions and the following disclaimer in the
-//   documentation and/or other materials provided with the distribution.
-//
-// - Neither the name of the NORDUnet nor the names of its contributors may
-//   be used to endorse or promote products derived from this software
-//   without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
-// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
-// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
-// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
-// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-//
-//======================================================================
-
-`timescale 1ns / 1ps
-
-module brom_p256_g_x
-   (
-		input		wire				clk,
-		input		wire	[ 3-1:0]	b_addr,
-		output	wire	[32-1:0]	b_out
-    );
-
-
-   //
-   // Output Registers
-   //
-   reg [31:0] bram_reg_b;
-
-   assign b_out = bram_reg_b;
-
-
-   //
-   // Read-Only Port B
-	//
-	always @(posedge clk)
-		//

-		case (b_addr)

-			3'b000:	bram_reg_b <= 32'hd898c296;

-			3'b001:	bram_reg_b <= 32'hf4a13945;

-			3'b010:	bram_reg_b <= 32'h2deb33a0;

-			3'b011:	bram_reg_b <= 32'h77037d81;

-			3'b100:	bram_reg_b <= 32'h63a440f2;

-			3'b101:	bram_reg_b <= 32'hf8bce6e5;

-			3'b110:	bram_reg_b <= 32'he12c4247;

-			3'b111:	bram_reg_b <= 32'h6b17d1f2;

-		endcase
-
-
-endmodule
diff --git a/rtl/curve/rom/brom_p256_g_y.v b/rtl/curve/rom/brom_p256_g_y.v
deleted file mode 100644
index 4d9c61e..0000000
--- a/rtl/curve/rom/brom_p256_g_y.v
+++ /dev/null
@@ -1,68 +0,0 @@
-//======================================================================
-//
-// Copyright (c) 2016, NORDUnet A/S All rights reserved.
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions
-// are met:
-// - Redistributions of source code must retain the above copyright
-//   notice, this list of conditions and the following disclaimer.
-//
-// - Redistributions in binary form must reproduce the above copyright
-//   notice, this list of conditions and the following disclaimer in the
-//   documentation and/or other materials provided with the distribution.
-//
-// - Neither the name of the NORDUnet nor the names of its contributors may
-//   be used to endorse or promote products derived from this software
-//   without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
-// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
-// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
-// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
-// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-//
-//======================================================================
-
-`timescale 1ns / 1ps
-
-module brom_p256_g_y
-   (
-		input		wire				clk,
-		input		wire	[ 3-1:0]	b_addr,
-		output	wire	[32-1:0]	b_out
-    );
-
-
-   //
-   // Output Registers
-   //
-   reg [31:0] bram_reg_b;
-
-   assign b_out = bram_reg_b;
-

-
-   //
-   // Read-Only Port B
-	//
-	always @(posedge clk)
-		//

-		case (b_addr)

-			3'b000:	bram_reg_b <= 32'h37bf51f5;

-			3'b001:	bram_reg_b <= 32'hcbb64068;

-			3'b010:	bram_reg_b <= 32'h6b315ece;

-			3'b011:	bram_reg_b <= 32'h2bce3357;

-			3'b100:	bram_reg_b <= 32'h7c0f9e16;

-			3'b101:	bram_reg_b <= 32'h8ee7eb4a;

-			3'b110:	bram_reg_b <= 32'hfe1a7f9b;

-			3'b111:	bram_reg_b <= 32'h4fe342e2;

-		endcase
-
-
-endmodule
diff --git a/rtl/curve/rom/brom_p256_h_x.v b/rtl/curve/rom/brom_p256_h_x.v
deleted file mode 100644
index 0b69f77..0000000
--- a/rtl/curve/rom/brom_p256_h_x.v
+++ /dev/null
@@ -1,68 +0,0 @@
-//======================================================================
-//
-// Copyright (c) 2016, NORDUnet A/S All rights reserved.
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions
-// are met:
-// - Redistributions of source code must retain the above copyright
-//   notice, this list of conditions and the following disclaimer.
-//
-// - Redistributions in binary form must reproduce the above copyright
-//   notice, this list of conditions and the following disclaimer in the
-//   documentation and/or other materials provided with the distribution.
-//
-// - Neither the name of the NORDUnet nor the names of its contributors may
-//   be used to endorse or promote products derived from this software
-//   without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
-// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
-// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
-// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
-// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-//
-//======================================================================
-
-`timescale 1ns / 1ps
-
-module brom_p256_h_x
-   (
-		input		wire				clk,
-		input		wire	[ 3-1:0]	b_addr,
-		output	wire	[32-1:0]	b_out
-    );
-
-
-   //
-   // Output Registers
-   //
-   reg [31:0] bram_reg_b;
-
-   assign b_out = bram_reg_b;
-
-
-   //
-   // Read-Only Port B
-	//
-	always @(posedge clk)
-		//

-		case (b_addr)

-			3'b000:	bram_reg_b <= 32'h4ece7ad0;

-			3'b001:	bram_reg_b <= 32'h16bd8d74;

-			3'b010:	bram_reg_b <= 32'ha42998be;

-			3'b011:	bram_reg_b <= 32'h11f904fe;

-			3'b100:	bram_reg_b <= 32'h38b77e1b;

-			3'b101:	bram_reg_b <= 32'h0e863235;

-			3'b110:	bram_reg_b <= 32'h3da77b71;

-			3'b111:	bram_reg_b <= 32'h29d05c19;

-		endcase
-
-
-endmodule
diff --git a/rtl/curve/rom/brom_p256_h_y.v b/rtl/curve/rom/brom_p256_h_y.v
deleted file mode 100644
index 362fce6..0000000
--- a/rtl/curve/rom/brom_p256_h_y.v
+++ /dev/null
@@ -1,68 +0,0 @@
-//======================================================================
-//
-// Copyright (c) 2016, NORDUnet A/S All rights reserved.
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions
-// are met:
-// - Redistributions of source code must retain the above copyright
-//   notice, this list of conditions and the following disclaimer.
-//
-// - Redistributions in binary form must reproduce the above copyright
-//   notice, this list of conditions and the following disclaimer in the
-//   documentation and/or other materials provided with the distribution.
-//
-// - Neither the name of the NORDUnet nor the names of its contributors may
-//   be used to endorse or promote products derived from this software
-//   without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
-// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
-// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
-// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
-// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-//
-//======================================================================
-
-`timescale 1ns / 1ps
-
-module brom_p256_h_y
-   (
-		input		wire				clk,
-		input		wire	[ 3-1:0]	b_addr,
-		output	wire	[32-1:0]	b_out
-    );
-
-
-   //
-   // Output Registers
-   //
-   reg [31:0] bram_reg_b;
-
-   assign b_out = bram_reg_b;
-

-
-   //
-   // Read-Only Port B
-	//
-	always @(posedge clk)
-		//

-		case (b_addr)

-			3'b000:	bram_reg_b <= 32'hc840ae07;

-			3'b001:	bram_reg_b <= 32'h3449bf97;

-			3'b010:	bram_reg_b <= 32'h94cea131;

-			3'b011:	bram_reg_b <= 32'hd431cca9;

-			3'b100:	bram_reg_b <= 32'h83f061e9;

-			3'b101:	bram_reg_b <= 32'h711814b5;

-			3'b110:	bram_reg_b <= 32'h01e58065;

-			3'b111:	bram_reg_b <= 32'hb01cbd1c;

-		endcase
-
-
-endmodule
diff --git a/rtl/curve/rom/brom_p256_one.v b/rtl/curve/rom/brom_p256_one.v
deleted file mode 100644
index 4097874..0000000
--- a/rtl/curve/rom/brom_p256_one.v
+++ /dev/null
@@ -1,68 +0,0 @@
-//======================================================================
-//
-// Copyright (c) 2016, NORDUnet A/S All rights reserved.
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions
-// are met:
-// - Redistributions of source code must retain the above copyright
-//   notice, this list of conditions and the following disclaimer.
-//
-// - Redistributions in binary form must reproduce the above copyright
-//   notice, this list of conditions and the following disclaimer in the
-//   documentation and/or other materials provided with the distribution.
-//
-// - Neither the name of the NORDUnet nor the names of its contributors may
-//   be used to endorse or promote products derived from this software
-//   without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
-// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
-// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
-// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
-// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-//
-//======================================================================
-
-`timescale 1ns / 1ps
-
-module brom_p256_one
-   (
-		input		wire				clk,
-		input		wire	[ 3-1:0]	b_addr,
-		output	wire	[32-1:0]	b_out
-    );
-
-
-   //
-   // Output Registers
-   //
-   reg [31:0] bram_reg_b;
-
-   assign b_out = bram_reg_b;
-
-
-   //
-   // Read-Only Port B
-	//
-	always @(posedge clk)
-		//

-		case (b_addr)

-			3'b000:	bram_reg_b <= 32'h00000001;

-			3'b001:	bram_reg_b <= 32'h00000000;

-			3'b010:	bram_reg_b <= 32'h00000000;

-			3'b011:	bram_reg_b <= 32'h00000000;

-			3'b100:	bram_reg_b <= 32'h00000000;

-			3'b101:	bram_reg_b <= 32'h00000000;

-			3'b110:	bram_reg_b <= 32'h00000000;

-			3'b111:	bram_reg_b <= 32'h00000000;

-		endcase
-
-
-endmodule
diff --git a/rtl/curve/rom/brom_p256_q.v b/rtl/curve/rom/brom_p256_q.v
deleted file mode 100644
index fe94593..0000000
--- a/rtl/curve/rom/brom_p256_q.v
+++ /dev/null
@@ -1,68 +0,0 @@
-//======================================================================
-//
-// Copyright (c) 2016, NORDUnet A/S All rights reserved.
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions
-// are met:
-// - Redistributions of source code must retain the above copyright
-//   notice, this list of conditions and the following disclaimer.
-//
-// - Redistributions in binary form must reproduce the above copyright
-//   notice, this list of conditions and the following disclaimer in the
-//   documentation and/or other materials provided with the distribution.
-//
-// - Neither the name of the NORDUnet nor the names of its contributors may
-//   be used to endorse or promote products derived from this software
-//   without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
-// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
-// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
-// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
-// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-//
-//======================================================================
-
-`timescale 1ns / 1ps
-
-module brom_p256_q
-   (
-		input		wire				clk,
-		input		wire	[ 3-1:0]	b_addr,
-		output	wire	[32-1:0]	b_out
-    );
-
-
-   //
-   // Output Registers
-   //
-   reg [31:0] bram_reg_b;
-
-   assign b_out = bram_reg_b;
-

-
-   //
-   // Read-Only Port B
-	//
-	always @(posedge clk)
-		//

-		case (b_addr)

-			3'b000:	bram_reg_b <= 32'hffffffff;

-			3'b001:	bram_reg_b <= 32'hffffffff;

-			3'b010:	bram_reg_b <= 32'hffffffff;

-			3'b011:	bram_reg_b <= 32'h00000000;

-			3'b100:	bram_reg_b <= 32'h00000000;

-			3'b101:	bram_reg_b <= 32'h00000000;

-			3'b110:	bram_reg_b <= 32'h00000001;

-			3'b111:	bram_reg_b <= 32'hffffffff;

-		endcase
-
-
-endmodule
diff --git a/rtl/curve/rom/brom_p256_zero.v b/rtl/curve/rom/brom_p256_zero.v
deleted file mode 100644
index f6d19a1..0000000
--- a/rtl/curve/rom/brom_p256_zero.v
+++ /dev/null
@@ -1,70 +0,0 @@
-//======================================================================
-//
-// Copyright (c) 2016, NORDUnet A/S All rights reserved.
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions
-// are met:
-// - Redistributions of source code must retain the above copyright
-//   notice, this list of conditions and the following disclaimer.
-//
-// - Redistributions in binary form must reproduce the above copyright
-//   notice, this list of conditions and the following disclaimer in the
-//   documentation and/or other materials provided with the distribution.
-//
-// - Neither the name of the NORDUnet nor the names of its contributors may
-//   be used to endorse or promote products derived from this software
-//   without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
-// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
-// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
-// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
-// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-//
-//======================================================================
-
-`timescale 1ns / 1ps
-
-module brom_p256_zero
-   (
-		//input		wire				clk,
-		//input		wire	[ 3-1:0]	b_addr,
-		output	wire	[32-1:0]	b_out
-    );
-
-

-	assign b_out = {32{1'b0}};

-
-   //
-   // Output Registers
-   //
-   //reg [31:0] bram_reg_b;
-
-   //assign b_out = bram_reg_b;
-
-
-   //
-   // Read-Only Port B
-	//
-	//always @(posedge clk)
-		//

-		//case (b_addr)

-			//3'b000:	bram_reg_b <= 32'h00000000;

-			//3'b001:	bram_reg_b <= 32'h00000000;

-			//3'b010:	bram_reg_b <= 32'h00000000;

-			//3'b011:	bram_reg_b <= 32'h00000000;

-			//3'b100:	bram_reg_b <= 32'h00000000;

-			//3'b101:	bram_reg_b <= 32'h00000000;

-			//3'b110:	bram_reg_b <= 32'h00000000;

-			//3'b111:	bram_reg_b <= 32'h00000000;

-		//endcase
-
-
-endmodule
diff --git a/rtl/curve/uop/uop_add_rom.v b/rtl/curve/uop/uop_add_rom.v
index c807736..c94aaf8 100644
--- a/rtl/curve/uop/uop_add_rom.v
+++ b/rtl/curve/uop/uop_add_rom.v
@@ -1,44 +1,44 @@
-`timescale 1ns / 1ps

-

-module uop_add_rom

-	(

-		input		wire				clk,

-		input		wire	[ 5: 0]	addr,

-		output	reg	[19: 0]	data
-    );
-

+`timescale 1ns / 1ps
 
-		//
-		// Microcode
-		//
-`include "..\uop_ecdsa.v"
-

+module uop_add_rom
+  (
+   input wire 	      clk,
+   input wire [ 5: 0] addr,
+   output reg [19: 0] data
+   );
 
-   	//
-		// Addition Microprogram
-		//
+
+   //
+   // Microcode
+   //
+`include "../uop_ecdsa.v"
+
+
+   //
+   // Addition Microprogram
+   //
    always @(posedge clk)
 
-		case (addr)

-		
+     case (addr)
+
 /*  2. */6'd00:	data <= {OPCODE_CMP, UOP_SRC_PZ,    UOP_SRC_ZERO,  UOP_DST_DUMMY, UOP_EXEC_ALWAYS};
 /*  3. */6'd01:	data <= {OPCODE_MOV, UOP_SRC_PZ,    UOP_SRC_DUMMY, UOP_DST_T1,    UOP_EXEC_ALWAYS};
-			6'd02:	data <= {OPCODE_MUL, UOP_SRC_PZ,    UOP_SRC_T1,    UOP_DST_T1,    UOP_EXEC_ALWAYS};
+         6'd02:	data <= {OPCODE_MUL, UOP_SRC_PZ,    UOP_SRC_T1,    UOP_DST_T1,    UOP_EXEC_ALWAYS};
 /*  4. */6'd03:	data <= {OPCODE_MUL, UOP_SRC_PZ,    UOP_SRC_T1,    UOP_DST_T2,    UOP_EXEC_ALWAYS};
 /*  5. */6'd04:	data <= {OPCODE_MUL, UOP_SRC_T1,    UOP_SRC_G_X,   UOP_DST_T1,    UOP_EXEC_ALWAYS};
 /*  6. */6'd05:	data <= {OPCODE_MUL, UOP_SRC_T2,    UOP_SRC_G_Y,   UOP_DST_T2,    UOP_EXEC_ALWAYS};
 /*  7. */6'd06:	data <= {OPCODE_SUB, UOP_SRC_T1,    UOP_SRC_PX,    UOP_DST_T1,    UOP_EXEC_ALWAYS};
 /*  8. */6'd07:	data <= {OPCODE_SUB, UOP_SRC_T2,    UOP_SRC_PY,    UOP_DST_T2,    UOP_EXEC_ALWAYS};
 /*  9. */6'd08:	data <= {OPCODE_CMP, UOP_SRC_T1,    UOP_SRC_ZERO,  UOP_DST_DUMMY, UOP_EXEC_ALWAYS};
-			6'd09:	data <= {OPCODE_CMP, UOP_SRC_T2,    UOP_SRC_ZERO,  UOP_DST_DUMMY, UOP_EXEC_ALWAYS};
+         6'd09:	data <= {OPCODE_CMP, UOP_SRC_T2,    UOP_SRC_ZERO,  UOP_DST_DUMMY, UOP_EXEC_ALWAYS};
 /* 10. */6'd10:	data <= {OPCODE_MUL, UOP_SRC_PZ,    UOP_SRC_T1,    UOP_DST_RZ,    UOP_EXEC_ALWAYS};
 /* 11. */6'd11:	data <= {OPCODE_MOV, UOP_SRC_T1,    UOP_SRC_DUMMY, UOP_DST_T3,    UOP_EXEC_ALWAYS};
-			6'd12:	data <= {OPCODE_MUL, UOP_SRC_T1,    UOP_SRC_T3,    UOP_DST_T3,    UOP_EXEC_ALWAYS};
+         6'd12:	data <= {OPCODE_MUL, UOP_SRC_T1,    UOP_SRC_T3,    UOP_DST_T3,    UOP_EXEC_ALWAYS};
 /* 12. */6'd13:	data <= {OPCODE_MUL, UOP_SRC_T1,    UOP_SRC_T3,    UOP_DST_T4,    UOP_EXEC_ALWAYS};
 /* 13. */6'd14:	data <= {OPCODE_MUL, UOP_SRC_PX,    UOP_SRC_T3,    UOP_DST_T3,    UOP_EXEC_ALWAYS};
 /* 14. */6'd15:	data <= {OPCODE_ADD, UOP_SRC_T3,    UOP_SRC_T3,    UOP_DST_T1,    UOP_EXEC_ALWAYS};
 /* 15. */6'd16:	data <= {OPCODE_MOV, UOP_SRC_T2,    UOP_SRC_DUMMY, UOP_DST_RX,    UOP_EXEC_ALWAYS};
-			6'd17:	data <= {OPCODE_MUL, UOP_SRC_RX,    UOP_SRC_T2,    UOP_DST_RX,    UOP_EXEC_ALWAYS};
+         6'd17:	data <= {OPCODE_MUL, UOP_SRC_RX,    UOP_SRC_T2,    UOP_DST_RX,    UOP_EXEC_ALWAYS};
 /* 16. */6'd18:	data <= {OPCODE_SUB, UOP_SRC_RX,    UOP_SRC_T1,    UOP_DST_RX,    UOP_EXEC_ALWAYS};
 /* 17. */6'd19:	data <= {OPCODE_SUB, UOP_SRC_RX,    UOP_SRC_T4,    UOP_DST_RX,    UOP_EXEC_ALWAYS};
 /* 18. */6'd20:	data <= {OPCODE_SUB, UOP_SRC_T3,    UOP_SRC_RX,    UOP_DST_T3,    UOP_EXEC_ALWAYS};
@@ -46,21 +46,21 @@ module uop_add_rom
 /* 20. */6'd22:	data <= {OPCODE_MUL, UOP_SRC_PY,    UOP_SRC_T4,    UOP_DST_T4,    UOP_EXEC_ALWAYS};
 /* 21. */6'd23:	data <= {OPCODE_SUB, UOP_SRC_T3,    UOP_SRC_T4,    UOP_DST_RY,    UOP_EXEC_ALWAYS};
 
-			6'd24:	data <= {OPCODE_MOV, UOP_SRC_G_X,   UOP_SRC_DUMMY, UOP_DST_RX,    UOP_EXEC_PZT1T2_0XX};
-			6'd25:	data <= {OPCODE_MOV, UOP_SRC_G_Y,   UOP_SRC_DUMMY, UOP_DST_RY,    UOP_EXEC_PZT1T2_0XX};
-			6'd26:	data <= {OPCODE_MOV, UOP_SRC_ONE,   UOP_SRC_DUMMY, UOP_DST_RZ,    UOP_EXEC_PZT1T2_0XX};
-			
-			6'd27:	data <= {OPCODE_MOV, UOP_SRC_H_X,   UOP_SRC_DUMMY, UOP_DST_RX,    UOP_EXEC_PZT1T2_100};
-			6'd28:	data <= {OPCODE_MOV, UOP_SRC_H_Y,   UOP_SRC_DUMMY, UOP_DST_RY,    UOP_EXEC_PZT1T2_100};
-			6'd29:	data <= {OPCODE_MOV, UOP_SRC_ONE,   UOP_SRC_DUMMY, UOP_DST_RZ,    UOP_EXEC_PZT1T2_100};
-			
-			6'd30:	data <= {OPCODE_MOV, UOP_SRC_ONE,   UOP_SRC_DUMMY, UOP_DST_RX,    UOP_EXEC_PZT1T2_101};
-			6'd31:	data <= {OPCODE_MOV, UOP_SRC_ONE,   UOP_SRC_DUMMY, UOP_DST_RY,    UOP_EXEC_PZT1T2_101};
-			6'd32:	data <= {OPCODE_MOV, UOP_SRC_ZERO,  UOP_SRC_DUMMY, UOP_DST_RZ,    UOP_EXEC_PZT1T2_101};
-			
-			default:	data <= {OPCODE_RDY, UOP_SRC_DUMMY, UOP_SRC_DUMMY, UOP_DST_DUMMY};

-			
-		endcase

-		

-

-endmodule

+         6'd24:	data <= {OPCODE_MOV, UOP_SRC_G_X,   UOP_SRC_DUMMY, UOP_DST_RX,    UOP_EXEC_PZT1T2_0XX};
+         6'd25:	data <= {OPCODE_MOV, UOP_SRC_G_Y,   UOP_SRC_DUMMY, UOP_DST_RY,    UOP_EXEC_PZT1T2_0XX};
+         6'd26:	data <= {OPCODE_MOV, UOP_SRC_ONE,   UOP_SRC_DUMMY, UOP_DST_RZ,    UOP_EXEC_PZT1T2_0XX};
+
+         6'd27:	data <= {OPCODE_MOV, UOP_SRC_H_X,   UOP_SRC_DUMMY, UOP_DST_RX,    UOP_EXEC_PZT1T2_100};
+         6'd28:	data <= {OPCODE_MOV, UOP_SRC_H_Y,   UOP_SRC_DUMMY, UOP_DST_RY,    UOP_EXEC_PZT1T2_100};
+         6'd29:	data <= {OPCODE_MOV, UOP_SRC_ONE,   UOP_SRC_DUMMY, UOP_DST_RZ,    UOP_EXEC_PZT1T2_100};
+
+         6'd30:	data <= {OPCODE_MOV, UOP_SRC_ONE,   UOP_SRC_DUMMY, UOP_DST_RX,    UOP_EXEC_PZT1T2_101};
+         6'd31:	data <= {OPCODE_MOV, UOP_SRC_ONE,   UOP_SRC_DUMMY, UOP_DST_RY,    UOP_EXEC_PZT1T2_101};
+         6'd32:	data <= {OPCODE_MOV, UOP_SRC_ZERO,  UOP_SRC_DUMMY, UOP_DST_RZ,    UOP_EXEC_PZT1T2_101};
+
+         default:	data <= {OPCODE_RDY, UOP_SRC_DUMMY, UOP_SRC_DUMMY, UOP_DST_DUMMY};
+
+     endcase
+
+
+endmodule
diff --git a/rtl/curve/uop/uop_conv_rom.v b/rtl/curve/uop/uop_conv_rom.v
index 3097736..dd6a7cb 100644
--- a/rtl/curve/uop/uop_conv_rom.v
+++ b/rtl/curve/uop/uop_conv_rom.v
@@ -1,38 +1,38 @@
-`timescale 1ns / 1ps

-

-module uop_conv_rom

-	(

-		input		wire				clk,

-		input		wire	[ 5: 0]	addr,

-		output	reg	[19: 0]	data
-    );
-

-
-		//

-		// Microcode

-		//

-`include "..\uop_ecdsa.v"

-

-
-   	//
-		// Doubling Microprogram
-		//
+`timescale 1ns / 1ps
+
+module uop_conv_rom
+  (
+   input wire 	      clk,
+   input wire [ 5: 0] addr,
+   output reg [19: 0] data
+   );
+
+
+   //
+   // Microcode
+   //
+`include "../uop_ecdsa.v"
+
+
+   //
+   // Doubling Microprogram
+   //
    always @(posedge clk)
 
-		case (addr)

-		

-			6'd00:	data <= {OPCODE_CMP, UOP_SRC_PZ,   UOP_SRC_ZERO,  UOP_DST_DUMMY, UOP_EXEC_ALWAYS};
-			6'd01:	data <= {OPCODE_MOV, UOP_SRC_V,    UOP_SRC_DUMMY, UOP_DST_T1,    UOP_EXEC_ALWAYS};

-			6'd02:	data <= {OPCODE_MUL, UOP_SRC_V,    UOP_SRC_T1,    UOP_DST_T2,    UOP_EXEC_ALWAYS};

-			6'd03:	data <= {OPCODE_MUL, UOP_SRC_V,    UOP_SRC_T2,    UOP_DST_T3,    UOP_EXEC_ALWAYS};

-			6'd04:	data <= {OPCODE_MUL, UOP_SRC_PX,   UOP_SRC_T2,    UOP_DST_RX,    UOP_EXEC_ALWAYS};

-			6'd05:	data <= {OPCODE_MUL, UOP_SRC_PY,   UOP_SRC_T3,    UOP_DST_RY,    UOP_EXEC_ALWAYS};

-			6'd06:	data <= {OPCODE_MOV, UOP_SRC_ZERO, UOP_SRC_DUMMY, UOP_DST_RX,    UOP_EXEC_PZT1T2_0XX};

-			6'd07:	data <= {OPCODE_MOV, UOP_SRC_ZERO, UOP_SRC_DUMMY, UOP_DST_RY,    UOP_EXEC_PZT1T2_0XX};

-			
-			default:	data <= {OPCODE_RDY, UOP_SRC_DUMMY, UOP_SRC_DUMMY, UOP_DST_DUMMY};

-			
-		endcase

-		

-

-endmodule

+     case (addr)
+
+       6'd00:	data <= {OPCODE_CMP, UOP_SRC_PZ,   UOP_SRC_ZERO,  UOP_DST_DUMMY, UOP_EXEC_ALWAYS};
+       6'd01:	data <= {OPCODE_MOV, UOP_SRC_V,    UOP_SRC_DUMMY, UOP_DST_T1,    UOP_EXEC_ALWAYS};
+       6'd02:	data <= {OPCODE_MUL, UOP_SRC_V,    UOP_SRC_T1,    UOP_DST_T2,    UOP_EXEC_ALWAYS};
+       6'd03:	data <= {OPCODE_MUL, UOP_SRC_V,    UOP_SRC_T2,    UOP_DST_T3,    UOP_EXEC_ALWAYS};
+       6'd04:	data <= {OPCODE_MUL, UOP_SRC_PX,   UOP_SRC_T2,    UOP_DST_RX,    UOP_EXEC_ALWAYS};
+       6'd05:	data <= {OPCODE_MUL, UOP_SRC_PY,   UOP_SRC_T3,    UOP_DST_RY,    UOP_EXEC_ALWAYS};
+       6'd06:	data <= {OPCODE_MOV, UOP_SRC_ZERO, UOP_SRC_DUMMY, UOP_DST_RX,    UOP_EXEC_PZT1T2_0XX};
+       6'd07:	data <= {OPCODE_MOV, UOP_SRC_ZERO, UOP_SRC_DUMMY, UOP_DST_RY,    UOP_EXEC_PZT1T2_0XX};
+
+       default:	data <= {OPCODE_RDY, UOP_SRC_DUMMY, UOP_SRC_DUMMY, UOP_DST_DUMMY};
+
+     endcase
+
+
+endmodule
diff --git a/rtl/curve/uop/uop_dbl_rom.v b/rtl/curve/uop/uop_dbl_rom.v
index 1939ca9..9ded543 100644
--- a/rtl/curve/uop/uop_dbl_rom.v
+++ b/rtl/curve/uop/uop_dbl_rom.v
@@ -1,26 +1,26 @@
-`timescale 1ns / 1ps

-

-module uop_dbl_rom

-	(

-		input		wire				clk,

-		input		wire	[ 5: 0]	addr,

-		output	reg	[19: 0]	data
-    );
-

-
-		//

-		// Microcode

-		//

-`include "..\uop_ecdsa.v"

-

-
-   	//
-		// Doubling Microprogram
-		//
+`timescale 1ns / 1ps
+
+module uop_dbl_rom
+  (
+   input wire 	      clk,
+   input wire [ 5: 0] addr,
+   output reg [19: 0] data
+   );
+
+
+   //
+   // Microcode
+   //
+`include "../uop_ecdsa.v"
+
+
+   //
+   // Doubling Microprogram
+   //
    always @(posedge clk)
 
-		case (addr)

-		
+     case (addr)
+
 /*  1. */6'd00:	data <= {OPCODE_CMP, UOP_SRC_PZ,    UOP_SRC_ZERO,  UOP_DST_DUMMY, UOP_EXEC_ALWAYS};
 /*  2. */6'd01:	data <= {OPCODE_MOV, UOP_SRC_PZ,    UOP_SRC_DUMMY, UOP_DST_T1,    UOP_EXEC_ALWAYS};
 			5'd02:	data <= {OPCODE_MUL, UOP_SRC_PZ,    UOP_SRC_T1,    UOP_DST_T1,    UOP_EXEC_ALWAYS};
@@ -42,17 +42,17 @@ module uop_dbl_rom
          6'd18:	data <= {OPCODE_MUL, UOP_SRC_T1,    UOP_SRC_T2,    UOP_DST_RX,    UOP_EXEC_ALWAYS};
 /* 14. */6'd19:	data <= {OPCODE_ADD, UOP_SRC_T3,    UOP_SRC_T3,    UOP_DST_T1,    UOP_EXEC_ALWAYS};
 /* 15. */6'd20:	data <= {OPCODE_SUB, UOP_SRC_RX,    UOP_SRC_T1,    UOP_DST_RX,    UOP_EXEC_ALWAYS};
-/* 16. */6'd21:	data <= {OPCODE_SUB, UOP_SRC_T3,    UOP_SRC_RX,    UOP_DST_T1,    UOP_EXEC_ALWAYS};	
+/* 16. */6'd21:	data <= {OPCODE_SUB, UOP_SRC_T3,    UOP_SRC_RX,    UOP_DST_T1,    UOP_EXEC_ALWAYS};
 /* 17. */6'd22:	data <= {OPCODE_MUL, UOP_SRC_T1,    UOP_SRC_T2,    UOP_DST_T1,    UOP_EXEC_ALWAYS};
-/* 18. */6'd23:	data <= {OPCODE_SUB, UOP_SRC_T1,    UOP_SRC_RY,    UOP_DST_RY,    UOP_EXEC_ALWAYS};

-
-			6'd24:	data <= {OPCODE_MOV, UOP_SRC_ONE,   UOP_SRC_DUMMY, UOP_DST_RX,    UOP_EXEC_PZT1T2_0XX};
-			6'd25:	data <= {OPCODE_MOV, UOP_SRC_ONE,   UOP_SRC_DUMMY, UOP_DST_RY,    UOP_EXEC_PZT1T2_0XX};
-			6'd26:	data <= {OPCODE_MOV, UOP_SRC_ZERO,  UOP_SRC_DUMMY, UOP_DST_RZ,    UOP_EXEC_PZT1T2_0XX};

-			
-			default:	data <= {OPCODE_RDY, UOP_SRC_DUMMY, UOP_SRC_DUMMY, UOP_DST_DUMMY};

-			
-		endcase

-		

-

-endmodule

+/* 18. */6'd23:	data <= {OPCODE_SUB, UOP_SRC_T1,    UOP_SRC_RY,    UOP_DST_RY,    UOP_EXEC_ALWAYS};
+
+         6'd24:	data <= {OPCODE_MOV, UOP_SRC_ONE,   UOP_SRC_DUMMY, UOP_DST_RX,    UOP_EXEC_PZT1T2_0XX};
+         6'd25:	data <= {OPCODE_MOV, UOP_SRC_ONE,   UOP_SRC_DUMMY, UOP_DST_RY,    UOP_EXEC_PZT1T2_0XX};
+         6'd26:	data <= {OPCODE_MOV, UOP_SRC_ZERO,  UOP_SRC_DUMMY, UOP_DST_RZ,    UOP_EXEC_PZT1T2_0XX};
+
+       default:	data <= {OPCODE_RDY, UOP_SRC_DUMMY, UOP_SRC_DUMMY, UOP_DST_DUMMY};
+
+     endcase
+
+
+endmodule
diff --git a/rtl/curve/uop/uop_init_rom.v b/rtl/curve/uop/uop_init_rom.v
index ac44b55..3863dbf 100644
--- a/rtl/curve/uop/uop_init_rom.v
+++ b/rtl/curve/uop/uop_init_rom.v
@@ -1,33 +1,33 @@
-`timescale 1ns / 1ps

-

-module uop_init_rom

-	(

-		input		wire				clk,

-		input		wire	[ 5: 0]	addr,

-		output	reg	[19: 0]	data
-    );
-

-
-		//

-		// Microcode

-		//

-`include "..\uop_ecdsa.v"

-

-
-   	//
-		// Doubling Microprogram
-		//
+`timescale 1ns / 1ps
+
+module uop_init_rom
+  (
+   input wire 	      clk,
+   input wire [ 5: 0] addr,
+   output reg [19: 0] data
+   );
+
+
+   //
+   // Microcode
+   //
+`include "../uop_ecdsa.v"
+
+
+   //
+   // Doubling Microprogram
+   //
    always @(posedge clk)
 
-		case (addr)

-		
-			6'd00:	data <= {OPCODE_MOV, UOP_SRC_ONE,  UOP_SRC_DUMMY, UOP_DST_RX, UOP_EXEC_ALWAYS};

-			6'd01:	data <= {OPCODE_MOV, UOP_SRC_ONE,  UOP_SRC_DUMMY, UOP_DST_RY, UOP_EXEC_ALWAYS};

-			6'd02:	data <= {OPCODE_MOV, UOP_SRC_ZERO, UOP_SRC_DUMMY, UOP_DST_RZ, UOP_EXEC_ALWAYS};

-			
-			default:	data <= {OPCODE_RDY, UOP_SRC_DUMMY, UOP_SRC_DUMMY, UOP_DST_DUMMY};

-			
-		endcase

-		

-

-endmodule

+     case (addr)
+
+       6'd00:	data <= {OPCODE_MOV, UOP_SRC_ONE,  UOP_SRC_DUMMY, UOP_DST_RX, UOP_EXEC_ALWAYS};
+       6'd01:	data <= {OPCODE_MOV, UOP_SRC_ONE,  UOP_SRC_DUMMY, UOP_DST_RY, UOP_EXEC_ALWAYS};
+       6'd02:	data <= {OPCODE_MOV, UOP_SRC_ZERO, UOP_SRC_DUMMY, UOP_DST_RZ, UOP_EXEC_ALWAYS};
+
+       default:	data <= {OPCODE_RDY, UOP_SRC_DUMMY, UOP_SRC_DUMMY, UOP_DST_DUMMY};
+
+     endcase
+
+
+endmodule
diff --git a/rtl/curve/uop_ecdsa.v b/rtl/curve/uop_ecdsa.v
index e64119d..ce757be 100644
--- a/rtl/curve/uop_ecdsa.v
+++ b/rtl/curve/uop_ecdsa.v
@@ -20,8 +20,8 @@ localparam	[ 4: 0]	UOP_SRC_T4			= 5'h0_9;
 
 localparam	[ 4: 0]	UOP_SRC_ONE			= 5'h0_A;
 localparam	[ 4: 0]	UOP_SRC_ZERO		= 5'h0_B;
-localparam	[ 4: 0]	UOP_SRC_DELTA		= 5'h0_C;

-

+localparam	[ 4: 0]	UOP_SRC_DELTA		= 5'h0_C;
+
 localparam	[ 4: 0]	UOP_SRC_V			= 5'h0_F;
 
 localparam	[ 4: 0]	UOP_SRC_G_X			= 5'h1_0;
diff --git a/rtl/ecdsa256.v b/rtl/ecdsa256.v
deleted file mode 100644
index 1e712bf..0000000
--- a/rtl/ecdsa256.v
+++ /dev/null
@@ -1,160 +0,0 @@
-//======================================================================
-//
-// Copyright (c) 2016, NORDUnet A/S All rights reserved.
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions
-// are met:
-// - Redistributions of source code must retain the above copyright
-//   notice, this list of conditions and the following disclaimer.
-//
-// - Redistributions in binary form must reproduce the above copyright
-//   notice, this list of conditions and the following disclaimer in the
-//   documentation and/or other materials provided with the distribution.
-//
-// - Neither the name of the NORDUnet nor the names of its contributors may
-//   be used to endorse or promote products derived from this software
-//   without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
-// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
-// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
-// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
-// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-//
-//======================================================================
-
-`timescale 1ns / 1ps
-
-module ecdsa256
-  (
-   input  wire        clk,

-	input  wire        rst_n,
-
-   input  wire        next,
-   output wire        valid,
-
-   input  wire        bus_cs,
-   input  wire        bus_we,
-   input  wire [ 4:0] bus_addr,
-   input  wire [31:0] bus_data_wr,
-   output wire [31:0] bus_data_rd
-   );
-
-

-	//

-	// Memory Banks

-	//

-	localparam [1:0] BUS_ADDR_BANK_K = 2'b00;

-	localparam [1:0] BUS_ADDR_BANK_X = 2'b01;

-	localparam [1:0] BUS_ADDR_BANK_Y = 2'b10;

-

-	wire [1:0] bus_addr_upper = bus_addr[4:3];

-	wire [2:0] bus_addr_lower = bus_addr[2:0];

-	

-	
-   //
-   // Memories
-   //

-	
-   wire [31:0] user_rw_k_bram_out;

-   wire [31:0] user_ro_x_bram_out;
-   wire [31:0] user_ro_y_bram_out;

-	

-	wire [ 2:0] core_ro_k_bram_addr;

-	wire [ 2:0] core_rw_x_bram_addr;

-	wire [ 2:0] core_rw_y_bram_addr;

-	

-	wire        core_rw_x_bram_wren;

-	wire        core_rw_y_bram_wren;

-	

-	wire [31:0] core_ro_k_bram_dout;

-	wire [31:0] core_rw_x_bram_din;

-	wire [31:0] core_rw_y_bram_din;

-

-	

-	bram_1rw_1ro_readfirst #
-	(	.MEM_WIDTH(32), .MEM_ADDR_BITS(3)
-	)
-	bram_k
-	(	.clk(clk),
-		.a_addr(bus_addr_lower), .a_out(user_rw_k_bram_out), .a_wr(bus_cs && bus_we && (bus_addr_upper == BUS_ADDR_BANK_K)), .a_in(bus_data_wr), 
-		.b_addr(core_ro_k_bram_addr), .b_out(core_ro_k_bram_dout)
-	);

-	

-	bram_1rw_1ro_readfirst #
-	(	.MEM_WIDTH(32), .MEM_ADDR_BITS(3)
-	)
-	bram_x
-	(	.clk(clk),
-		.a_addr(core_rw_x_bram_addr), .a_out(), .a_wr(core_rw_x_bram_wren), .a_in(core_rw_x_bram_din), 
-		.b_addr(bus_addr_lower),      .b_out(user_ro_x_bram_out)
-	);

-	

-	bram_1rw_1ro_readfirst #
-	(	.MEM_WIDTH(32), .MEM_ADDR_BITS(3)
-	)
-	bram_y
-	(	.clk(clk),
-		.a_addr(core_rw_y_bram_addr), .a_out(), .a_wr(core_rw_y_bram_wren), .a_in(core_rw_y_bram_din), 
-		.b_addr(bus_addr_lower),      .b_out(user_ro_y_bram_out)
-	);

-
-
-   //
-   // Curve Base Point Multiplier
-   //

-	reg  next_dly;

-	

-	always @(posedge clk) next_dly <= next;

-	

-	wire next_trig = next && !next_dly;

-	
-   curve_mul_256 base_point_multiplier_p256

-	(

-		.clk		(clk),

-		.rst_n	(rst_n),

-		

-		.ena		(next_trig),

-		.rdy		(valid),

-		

-		.k_addr	(core_ro_k_bram_addr),

-		.rx_addr	(core_rw_x_bram_addr),

-		.ry_addr	(core_rw_y_bram_addr),

-		

-		.rx_wren	(core_rw_x_bram_wren),

-		.ry_wren	(core_rw_y_bram_wren),

-		

-		.k_din	(core_ro_k_bram_dout),

-		.rx_dout	(core_rw_x_bram_din),

-		.ry_dout	(core_rw_y_bram_din)

-	);
-
-	//
-   // Output Selector
-   //
-   reg [1:0] bus_addr_upper_prev;
-   always @(posedge clk) bus_addr_upper_prev = bus_addr_upper;
-
-   reg [31: 0] bus_data_rd_mux;
-   assign bus_data_rd = bus_data_rd_mux;
-
-   always @(*)
-     //
-     case (bus_addr_upper_prev)
-       //
-       BUS_ADDR_BANK_K: bus_data_rd_mux = user_rw_k_bram_out;
-       BUS_ADDR_BANK_X: bus_data_rd_mux = user_ro_x_bram_out;
-       BUS_ADDR_BANK_Y: bus_data_rd_mux = user_ro_y_bram_out;
-       //
-       default:         bus_data_rd_mux = {32{1'b0}};
-       //
-     endcase
-
-endmodule
diff --git a/rtl/ecdsa256_wrapper.v b/rtl/ecdsa256_wrapper.v
deleted file mode 100644
index c6e93ea..0000000
--- a/rtl/ecdsa256_wrapper.v
+++ /dev/null
@@ -1,177 +0,0 @@
-//======================================================================
-//
-// Copyright (c) 2016, NORDUnet A/S All rights reserved.
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions
-// are met:
-// - Redistributions of source code must retain the above copyright
-//   notice, this list of conditions and the following disclaimer.
-//
-// - Redistributions in binary form must reproduce the above copyright
-//   notice, this list of conditions and the following disclaimer in the
-//   documentation and/or other materials provided with the distribution.
-//
-// - Neither the name of the NORDUnet nor the names of its contributors may
-//   be used to endorse or promote products derived from this software
-//   without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
-// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
-// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
-// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
-// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-//
-//======================================================================
-
-module ecdsa256_wrapper
-  (
-   input wire          clk,
-   input wire          rst_n,
-
-   input wire          cs,
-   input wire          we,
-
-   input wire [5: 0]   address,
-   input wire [31: 0]  write_data,
-   output wire [31: 0] read_data
-   );
-
-
-   //
-   // Address Decoder
-   //
-   localparam ADDR_MSB_REGS = 1'b0;

-	localparam ADDR_MSB_CORE = 1'b1;

-	
-   wire [0:0] addr_msb = address[5];
-   wire [4:0] addr_lsb = address[4:0];
-
-
-   //
-   // Output Mux
-   //
-   wire [31: 0] read_data_regs;
-   wire [31: 0] read_data_core;
-
-
-   //
-   // Registers
-   //
-   localparam ADDR_NAME0        = 5'h00;
-   localparam ADDR_NAME1        = 5'h01;
-   localparam ADDR_VERSION      = 5'h02;
-
-   localparam ADDR_CONTROL      = 5'h08;               // {next, init}
-   localparam ADDR_STATUS       = 5'h09;               // {valid, ready}

-	localparam ADDR_DUMMY        = 5'h0F;               // don't care
-
-// localparam CONTROL_INIT_BIT  = 0; -- not used
-   localparam CONTROL_NEXT_BIT  = 1;
-
-// localparam STATUS_READY_BIT  = 0; -- hardcoded to always read 1
-   localparam STATUS_VALID_BIT  = 1;
-
-   localparam CORE_NAME0        = 32'h65636473; // "ecds"
-   localparam CORE_NAME1        = 32'h61323536; // "a256"
-   localparam CORE_VERSION      = 32'h302E3131; // "0.11"
-
-
-   //
-   // Registers
-   //
-   reg        reg_control;

-	reg [31:0] reg_dummy;
-
-
-   //
-   // Wires
-   //
-   wire reg_status;
-
-
-   //
-   // ECDSA256
-   //
-   ecdsa256 ecdsa256_inst
-	(
-      .clk                      (clk),

-		.rst_n                    (rst_n),
-
-      .next                     (reg_control),
-      .valid                    (reg_status),
-
-      .bus_cs                   (cs && (addr_msb == ADDR_MSB_CORE)),
-      .bus_we                   (we),
-      .bus_addr                 (addr_lsb),
-      .bus_data_wr              (write_data),
-      .bus_data_rd              (read_data_core)
-	);
-
-
-   //
-   // Read Latch
-   //
-   reg [31: 0]         tmp_read_data;
-
-
-   //
-   // Read/Write Interface
-   //
-   always @(posedge clk)
-     //
-     if (!rst_n) begin
-        //
-        reg_control <= 1'b0;
-        //
-     end else if (cs && (addr_msb == ADDR_MSB_REGS)) begin
-        //
-        if (we) begin
-           //
-           // Write Handler
-           //
-           case (addr_lsb)
-             //
-             ADDR_CONTROL: reg_control <= write_data[1];

-				 ADDR_DUMMY:   reg_dummy   <= write_data[31:0];
-             //
-           endcase
-           //
-        end else begin
-           //
-           // Read Handler
-           //
-           case (address)
-             //
-             ADDR_NAME0:        tmp_read_data <= CORE_NAME0;
-             ADDR_NAME1:        tmp_read_data <= CORE_NAME1;
-             ADDR_VERSION:      tmp_read_data <= CORE_VERSION;
-             ADDR_CONTROL:      tmp_read_data <= {{30{1'b0}}, reg_control, 1'b0};
-             ADDR_STATUS:       tmp_read_data <= {{30{1'b0}}, reg_status,  1'b1};

-				 ADDR_DUMMY:        tmp_read_data <= reg_dummy;

-             //
-             default:           tmp_read_data <= 32'h00000000;
-             //
-           endcase
-           //
-        end
-        //
-     end
-
-
-   //
-   // Register / Core Memory Selector
-   //
-   reg addr_msb_last;
-   always @(posedge clk) addr_msb_last = addr_msb;
-
-   assign read_data = (addr_msb_last == ADDR_MSB_REGS) ? tmp_read_data : read_data_core;
-
-
-endmodule
diff --git a/rtl/lowlevel/adder32_wrapper.v b/rtl/lowlevel/adder32_wrapper.v
index ebfd8ce..57778df 100644
--- a/rtl/lowlevel/adder32_wrapper.v
+++ b/rtl/lowlevel/adder32_wrapper.v
@@ -2,7 +2,7 @@
 //
 // adder32_wrapper.v
 // -----------------------------------------------------------------------------
-// Wrapper for 32-bit adder.

+// Wrapper for 32-bit adder.
 //
 // Authors: Pavel Shatov
 //
@@ -34,40 +34,40 @@
 // ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 // POSSIBILITY OF SUCH DAMAGE.
 //
-//------------------------------------------------------------------------------

-

-module adder32_wrapper

-	(

-		input					clk,		// clock

-		input		[31: 0]	a,			// operand input

-		input		[31: 0]	b,			// operand input

-		output	[31: 0]	s,			// sum output

-		input					c_in,		// carry input

-		output				c_out		// carry output

-	);

-	

-		//

-		// Include Primitive Selector

-		//

-`include "ecdsa_lowlevel_settings.v"

-

-

-		//

-		// Instantiate Vendor/Generic Primitive

-		//

-	`ADDER32_PRIMITIVE adder32_inst

-	(

-		.clk(clk),

-		.a(a),

-		.b(b),

-		.s(s),

-		.c_in(c_in),

-		.c_out(c_out)

-	);

-	

-

-endmodule

-

+//------------------------------------------------------------------------------
+
+module adder32_wrapper
+  (
+   input 	  clk, // clock
+   input [31: 0]  a, // operand input
+   input [31: 0]  b, // operand input
+   output [31: 0] s, // sum output
+   input 	  c_in, // carry input
+   output 	  c_out		// carry output
+   );
+
+   //
+   // Include Primitive Selector
+   //
+`include "ecdsa_lowlevel_settings.v"
+
+
+   //
+   // Instantiate Vendor/Generic Primitive
+   //
+   `ADDER32_PRIMITIVE adder32_inst
+     (
+      .clk(clk),
+      .a(a),
+      .b(b),
+      .s(s),
+      .c_in(c_in),
+      .c_out(c_out)
+      );
+
+
+endmodule
+
 //------------------------------------------------------------------------------
 // End-of-File
-//------------------------------------------------------------------------------

+//------------------------------------------------------------------------------
diff --git a/rtl/lowlevel/adder47_wrapper.v b/rtl/lowlevel/adder47_wrapper.v
index 1a0a18e..be5b1ee 100644
--- a/rtl/lowlevel/adder47_wrapper.v
+++ b/rtl/lowlevel/adder47_wrapper.v
@@ -2,7 +2,7 @@
 //
 // adder47_wrapper.v
 // -----------------------------------------------------------------------------
-// Wrapper for 47-bit adder.

+// Wrapper for 47-bit adder.
 //
 // Authors: Pavel Shatov
 //
@@ -34,36 +34,36 @@
 // ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 // POSSIBILITY OF SUCH DAMAGE.
 //
-//------------------------------------------------------------------------------

-

-module adder47_wrapper

-	(

-		input					clk,		// clock

-		input		[46: 0]	a,			// operand input

-		input		[46: 0]	b,			// operand input

-		output	[46: 0]	s			// sum output

-	);

-	

-		//

-		// Include Primitive Selector

-		//

-`include "ecdsa_lowlevel_settings.v"

-

-

-		//

-		// Instantiate Vendor/Generic Primitive

-		//

-	`ADDER47_PRIMITIVE adder47_inst

-	(

-		.clk(clk),

-		.a(a),

-		.b(b),

-		.s(s)

-	);

-	

-	

-endmodule

-

+//------------------------------------------------------------------------------
+
+module adder47_wrapper
+  (
+   input 	  clk, // clock
+   input [46: 0]  a, // operand input
+   input [46: 0]  b, // operand input
+   output [46: 0] s			// sum output
+   );
+
+   //
+   // Include Primitive Selector
+   //
+`include "ecdsa_lowlevel_settings.v"
+
+
+   //
+   // Instantiate Vendor/Generic Primitive
+   //
+   `ADDER47_PRIMITIVE adder47_inst
+     (
+      .clk(clk),
+      .a(a),
+      .b(b),
+      .s(s)
+      );
+
+
+endmodule
+
 //------------------------------------------------------------------------------
 // End-of-File
-//------------------------------------------------------------------------------

+//------------------------------------------------------------------------------
diff --git a/rtl/lowlevel/artix7/adder32_artix7.v b/rtl/lowlevel/artix7/adder32_artix7.v
index 5f9ba79..dad2340 100644
--- a/rtl/lowlevel/artix7/adder32_artix7.v
+++ b/rtl/lowlevel/artix7/adder32_artix7.v
@@ -2,7 +2,7 @@
 //
 // adder32_artix7.v
 // -----------------------------------------------------------------------------
-// Hardware (Artix-7 DSP48E1) 32-bit adder.

+// Hardware (Artix-7 DSP48E1) 32-bit adder.
 //
 // Authors: Pavel Shatov
 //
@@ -34,63 +34,63 @@
 // ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 // POSSIBILITY OF SUCH DAMAGE.
 //
-//------------------------------------------------------------------------------

-

-module adder32_artix7

-	(

-		input					clk,		// clock

-		input		[31: 0]	a,			// operand input

-		input		[31: 0]	b,			// operand input

-		output	[31: 0]	s,			// sum output

-		input					c_in,		// carry input

-		output				c_out		// carry output

-	);

-	

-		//

-		// Lower and higher parts of operand

-		//

-	wire	[17: 0]	bl = b[17: 0];

-	wire	[13: 0]	bh = b[31:18];

-

-		

-		//

-		// DSP48E1 Slice

-		//

-		

-		/* Operation Mode */

-	wire	[ 3: 0]	dsp48e1_alumode	= 4'b0000;

-	wire	[ 6: 0]	dsp48e1_opmode		= 7'b0110011;

-		

-		/* Internal Product */

-	wire	[47: 0]	p_int;

-

-	dsp48e1_wrapper dsp_adder

-	(

-		.clk			(clk),

-		

-		.ce			(1'b1),

-		

-		.carry		(c_in),

-		

-		.alumode		(dsp48e1_alumode),

-		.opmode		(dsp48e1_opmode),

-		

-		.a				({{16{1'b0}}, bh}),

-		.b				(bl),

-		.c				({{16{1'b0}}, a}),

-		

-		.p				(p_int)

-	);

-

-		//

-		// Output Mapping

-		//

-	assign s 		= p_int[31: 0];

-	assign c_out	= p_int[32];

-

-

-endmodule

-

+//------------------------------------------------------------------------------
+
+module adder32_artix7
+  (
+   input 	  clk, // clock
+   input [31: 0]  a, // operand input
+   input [31: 0]  b, // operand input
+   output [31: 0] s, // sum output
+   input 	  c_in, // carry input
+   output 	  c_out		// carry output
+   );
+
+   //
+   // Lower and higher parts of operand
+   //
+   wire [17: 0]   bl = b[17: 0];
+   wire [13: 0]   bh = b[31:18];
+
+
+   //
+   // DSP48E1 Slice
+   //
+
+   /* Operation Mode */
+   wire [ 3: 0]   dsp48e1_alumode	= 4'b0000;
+   wire [ 6: 0]   dsp48e1_opmode		= 7'b0110011;
+
+   /* Internal Product */
+   wire [47: 0]   p_int;
+
+   dsp48e1_wrapper dsp_adder
+     (
+      .clk			(clk),
+
+      .ce			(1'b1),
+
+      .carry		(c_in),
+
+      .alumode		(dsp48e1_alumode),
+      .opmode		(dsp48e1_opmode),
+
+      .a				({{16{1'b0}}, bh}),
+      .b				(bl),
+      .c				({{16{1'b0}}, a}),
+
+      .p				(p_int)
+      );
+
+   //
+   // Output Mapping
+   //
+   assign s 		= p_int[31: 0];
+   assign c_out	= p_int[32];
+
+
+endmodule
+
 //------------------------------------------------------------------------------
 // End-of-File
-//------------------------------------------------------------------------------

+//------------------------------------------------------------------------------
diff --git a/rtl/lowlevel/artix7/adder47_artix7.v b/rtl/lowlevel/artix7/adder47_artix7.v
index 00566e4..caafc85 100644
--- a/rtl/lowlevel/artix7/adder47_artix7.v
+++ b/rtl/lowlevel/artix7/adder47_artix7.v
@@ -2,7 +2,7 @@
 //
 // adder47_artix7.v
 // -----------------------------------------------------------------------------
-// Hardware (Artix-7 DSP48E1) 47-bit adder.

+// Hardware (Artix-7 DSP48E1) 47-bit adder.
 //
 // Authors: Pavel Shatov
 //
@@ -34,58 +34,58 @@
 // ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 // POSSIBILITY OF SUCH DAMAGE.
 //
-//------------------------------------------------------------------------------

-

-module adder47_artix7

-	(

-		input					clk,		// clock

-		input		[46: 0]	a,			// operand input

-		input		[46: 0]	b,			// operand input

-		output	[46: 0]	s			// sum output

-	);

-	

-		//

-		// Lower and higher parts of operand

-		//

-	wire	[17: 0]	bl = b[17: 0];

-	wire	[28: 0]	bh = b[46:18];

-

-		//

-		// DSP48E1 Slice

-		//

-		

-		/* Operation Mode */

-	wire	[ 3: 0]	dsp48e1_alumode	= 4'b0000;

-	wire	[ 6: 0]	dsp48e1_opmode		= 7'b0110011;

-		

-		/* Internal Product */

-	wire	[47: 0]	p_int;

-

-	dsp48e1_wrapper dsp_adder

-	(

-		.clk			(clk),

-		

-		.ce			(1'b1),

-		

-		.carry		(1'b0),

-		

-		.alumode		(dsp48e1_alumode),

-		.opmode		(dsp48e1_opmode),

-		

-		.a				({1'b0, bh}),

-		.b				(bl),

-		.c				({1'b0, a}),

-		

-		.p				(p_int)

-	);

-

-		//

-		// Output Mapping

-		//

-	assign s 		= p_int[46: 0];

-

-endmodule

-

+//------------------------------------------------------------------------------
+
+module adder47_artix7
+  (
+   input 	  clk,	// clock
+   input [46: 0]  a,	// operand input
+   input [46: 0]  b,	// operand input
+   output [46: 0] s	// sum output
+   );
+
+   //
+   // Lower and higher parts of operand
+   //
+   wire [17: 0]   bl = b[17: 0];
+   wire [28: 0]   bh = b[46:18];
+
+   //
+   // DSP48E1 Slice
+   //
+
+   /* Operation Mode */
+   wire [ 3: 0]   dsp48e1_alumode	= 4'b0000;
+   wire [ 6: 0]   dsp48e1_opmode	= 7'b0110011;
+
+   /* Internal Product */
+   wire [47: 0]   p_int;
+
+   dsp48e1_wrapper dsp_adder
+     (
+      .clk			(clk),
+
+      .ce			(1'b1),
+
+      .carry		(1'b0),
+
+      .alumode		(dsp48e1_alumode),
+      .opmode		(dsp48e1_opmode),
+
+      .a				({1'b0, bh}),
+      .b				(bl),
+      .c				({1'b0, a}),
+
+      .p				(p_int)
+      );
+
+   //
+   // Output Mapping
+   //
+   assign s 		= p_int[46: 0];
+
+endmodule
+
 //------------------------------------------------------------------------------
 // End-of-File
-//------------------------------------------------------------------------------

+//------------------------------------------------------------------------------
diff --git a/rtl/lowlevel/artix7/dsp48e1_wrapper.v b/rtl/lowlevel/artix7/dsp48e1_wrapper.v
index 11a21bc..4c272f0 100644
--- a/rtl/lowlevel/artix7/dsp48e1_wrapper.v
+++ b/rtl/lowlevel/artix7/dsp48e1_wrapper.v
@@ -2,7 +2,7 @@
 //
 // dsp48e1_wrapper.v
 // -----------------------------------------------------------------------------
-// Hardware (Artix-7 DSP48E1) tile wrapper.

+// Hardware (Artix-7 DSP48E1) tile wrapper.
 //
 // Authors: Pavel Shatov
 //
@@ -34,126 +34,126 @@
 // ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 // POSSIBILITY OF SUCH DAMAGE.
 //
-//------------------------------------------------------------------------------

-

-module dsp48e1_wrapper

-	(

-		input					clk,

-		

-		input					ce,

-		

-		input		[ 6: 0]	opmode,

-		input		[ 3: 0]	alumode,

-		

-		input					carry,

-		

-		input		[29: 0]	a,

-		input		[17: 0]	b,

-		input		[47: 0]	c,

-		

-		output	[47: 0]	p

-	);

-	

-	

-		//

-		// Tile instantiation

-		//

-	DSP48E1 #
-	(
-		.AREG						(0),
-		.BREG						(0),
-		.CREG						(0),
-		.DREG						(0),
-		.MREG						(0),
-		.PREG						(1),
-		.ADREG					(0),

-		
-		.ACASCREG				(0),
-		.BCASCREG				(0),
-		.ALUMODEREG				(0),
-		.INMODEREG				(0),
-		.OPMODEREG				(0),
-		.CARRYINREG				(0),
-		.CARRYINSELREG			(0),
-
-		.A_INPUT					("DIRECT"),
-		.B_INPUT					("DIRECT"),

-		
-		.USE_DPORT				("FALSE"),
-		.USE_MULT				("DYNAMIC"),
-		.USE_SIMD				("ONE48"),
-
-		.USE_PATTERN_DETECT	("NO_PATDET"),
-		.SEL_PATTERN			("PATTERN"),
-		.SEL_MASK				("MASK"),
-		.PATTERN					(48'h000000000000),
-		.MASK						(48'h3fffffffffff),
-		.AUTORESET_PATDET		("NO_RESET")
-	)
-	DSP48E1_inst
-	(
-		.CLK					(clk),
-
-		.RSTA					(1'b0),
-		.RSTB					(1'b0),
-		.RSTC					(1'b0),
-		.RSTD					(1'b0),
-		.RSTM					(1'b0),
-		.RSTP					(1'b0),
-
-		.RSTCTRL				(1'b0),
-		.RSTINMODE			(1'b0),
-		.RSTALUMODE			(1'b0),
-		.RSTALLCARRYIN		(1'b0),
-
-		.CEA1					(1'b0),
-		.CEA2					(1'b0),
-		.CEB1					(1'b0),
-		.CEB2					(1'b0),
-		.CEC					(1'b0),
-		.CED					(1'b0),
-		.CEM					(1'b0),
-		.CEP					(ce),
-		.CEAD					(1'b0),
-		.CEALUMODE			(1'b0),
-		.CEINMODE			(1'b0),
-
-		.CECTRL				(1'b0),
-		.CECARRYIN			(1'b0),
-
-		.A						(a),
-		.B						(b),
-		.C						(c),
-		.D						({25{1'b1}}),
-		.P						(p),
-
-		.CARRYIN				(carry),
-		.CARRYOUT			(),
-		.CARRYINSEL			(3'b000),
-
-		.CARRYCASCIN		(1'b0),
-		.CARRYCASCOUT		(),
-
-		.PATTERNDETECT		(),
-		.PATTERNBDETECT	(),
-
-		.OPMODE				(opmode),
-		.ALUMODE				(alumode),
-		.INMODE				(5'b00000),
-
-		.MULTSIGNIN			(1'b0),
-		.MULTSIGNOUT		(),
-
-		.UNDERFLOW			(),
-		.OVERFLOW			(),
-
-		.ACIN					(30'd0),
-		.BCIN					(18'd0),
-		.PCIN					(48'd0),
-
-		.ACOUT				(),
-		.BCOUT				(),
-		.PCOUT				()
-  );
-

-endmodule

+//------------------------------------------------------------------------------
+
+module dsp48e1_wrapper
+  (
+   input 	  clk,
+
+   input 	  ce,
+
+   input [ 6: 0]  opmode,
+   input [ 3: 0]  alumode,
+
+   input 	  carry,
+
+   input [29: 0]  a,
+   input [17: 0]  b,
+   input [47: 0]  c,
+
+   output [47: 0] p
+   );
+
+
+   //
+   // Tile instantiation
+   //
+   DSP48E1 #
+     (
+      .AREG						(0),
+      .BREG						(0),
+      .CREG						(0),
+      .DREG						(0),
+      .MREG						(0),
+      .PREG						(1),
+      .ADREG					(0),
+
+      .ACASCREG				(0),
+      .BCASCREG				(0),
+      .ALUMODEREG				(0),
+      .INMODEREG				(0),
+      .OPMODEREG				(0),
+      .CARRYINREG				(0),
+      .CARRYINSELREG			(0),
+
+      .A_INPUT					("DIRECT"),
+      .B_INPUT					("DIRECT"),
+
+      .USE_DPORT				("FALSE"),
+      .USE_MULT				("DYNAMIC"),
+      .USE_SIMD				("ONE48"),
+
+      .USE_PATTERN_DETECT	("NO_PATDET"),
+      .SEL_PATTERN			("PATTERN"),
+      .SEL_MASK				("MASK"),
+      .PATTERN					(48'h000000000000),
+      .MASK						(48'h3fffffffffff),
+      .AUTORESET_PATDET		("NO_RESET")
+      )
+   DSP48E1_inst
+     (
+      .CLK					(clk),
+
+      .RSTA					(1'b0),
+      .RSTB					(1'b0),
+      .RSTC					(1'b0),
+      .RSTD					(1'b0),
+      .RSTM					(1'b0),
+      .RSTP					(1'b0),
+
+      .RSTCTRL				(1'b0),
+      .RSTINMODE			(1'b0),
+      .RSTALUMODE			(1'b0),
+      .RSTALLCARRYIN		(1'b0),
+
+      .CEA1					(1'b0),
+      .CEA2					(1'b0),
+      .CEB1					(1'b0),
+      .CEB2					(1'b0),
+      .CEC					(1'b0),
+      .CED					(1'b0),
+      .CEM					(1'b0),
+      .CEP					(ce),
+      .CEAD					(1'b0),
+      .CEALUMODE			(1'b0),
+      .CEINMODE			(1'b0),
+
+      .CECTRL				(1'b0),
+      .CECARRYIN			(1'b0),
+
+      .A						(a),
+      .B						(b),
+      .C						(c),
+      .D						({25{1'b1}}),
+      .P						(p),
+
+      .CARRYIN				(carry),
+      .CARRYOUT			(),
+      .CARRYINSEL			(3'b000),
+
+      .CARRYCASCIN		(1'b0),
+      .CARRYCASCOUT		(),
+
+      .PATTERNDETECT		(),
+      .PATTERNBDETECT	(),
+
+      .OPMODE				(opmode),
+      .ALUMODE				(alumode),
+      .INMODE				(5'b00000),
+
+      .MULTSIGNIN			(1'b0),
+      .MULTSIGNOUT		(),
+
+      .UNDERFLOW			(),
+      .OVERFLOW			(),
+
+      .ACIN					(30'd0),
+      .BCIN					(18'd0),
+      .PCIN					(48'd0),
+
+      .ACOUT				(),
+      .BCOUT				(),
+      .PCOUT				()
+      );
+
+endmodule
diff --git a/rtl/lowlevel/artix7/mac16_artix7.v b/rtl/lowlevel/artix7/mac16_artix7.v
index 63b74ab..421e7ba 100644
--- a/rtl/lowlevel/artix7/mac16_artix7.v
+++ b/rtl/lowlevel/artix7/mac16_artix7.v
@@ -2,7 +2,7 @@
 //
 // mac16_artix7.v
 // -----------------------------------------------------------------------------
-// Hardware (Artix-7 DSP48E1) 16-bit multiplier and 47-bit accumulator.

+// Hardware (Artix-7 DSP48E1) 16-bit multiplier and 47-bit accumulator.
 //
 // Authors: Pavel Shatov
 //
@@ -34,57 +34,57 @@
 // ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 // POSSIBILITY OF SUCH DAMAGE.
 //
-//------------------------------------------------------------------------------

-

-module mac16_artix7

-	(

-		input					clk,		// clock

-		input					clr,		// clear accumulator (active-high)

-		input					ce,		// enable clock (active-high)

-		input		[15: 0]	a,			// operand input

-		input		[15: 0]	b,			// operand input

-		output	[46: 0]	s			// sum output

-	);

-	

-			

-		//

-		// DSP48E1 Slice

-		//

-		

-		/* Operation Mode */

-	wire	[ 3: 0]	dsp48e1_alumode	= 4'b0000;

-	wire	[ 6: 0]	dsp48e1_opmode		= {2'b01, clr, 4'b0101};

-		

-		/* Internal Product */

-	wire	[47: 0]	p_int;

-

-	dsp48e1_wrapper dsp_adder

-	(

-		.clk			(clk),

-		

-		.ce			(ce),

-		

-		.carry		(1'b0),

-		

-		.alumode		(dsp48e1_alumode),

-		.opmode		(dsp48e1_opmode),

-		

-		.a				({{14{1'b0}}, a}),

-		.b				({{ 2{1'b0}}, b}),

-		.c				({48{1'b0}}),

-		

-		.p				(p_int)

-	);

-

-		//

-		// Output Mapping

-		//

-	assign s = p_int[46:0];

-	

-

-endmodule

-

-

+//------------------------------------------------------------------------------
+
+module mac16_artix7
+  (
+   input 	  clk, // clock
+   input 	  clr, // clear accumulator (active-high)
+   input 	  ce, // enable clock (active-high)
+   input [15: 0]  a, // operand input
+   input [15: 0]  b, // operand input
+   output [46: 0] s			// sum output
+   );
+
+
+   //
+   // DSP48E1 Slice
+   //
+
+   /* Operation Mode */
+   wire [ 3: 0]   dsp48e1_alumode	= 4'b0000;
+   wire [ 6: 0]   dsp48e1_opmode		= {2'b01, clr, 4'b0101};
+
+   /* Internal Product */
+   wire [47: 0]   p_int;
+
+   dsp48e1_wrapper dsp_adder
+     (
+      .clk			(clk),
+
+      .ce			(ce),
+
+      .carry		(1'b0),
+
+      .alumode		(dsp48e1_alumode),
+      .opmode		(dsp48e1_opmode),
+
+      .a				({{14{1'b0}}, a}),
+      .b				({{ 2{1'b0}}, b}),
+      .c				({48{1'b0}}),
+
+      .p				(p_int)
+      );
+
+   //
+   // Output Mapping
+   //
+   assign s = p_int[46:0];
+
+
+endmodule
+
+
 //------------------------------------------------------------------------------
 // End-of-File
-//------------------------------------------------------------------------------

+//------------------------------------------------------------------------------
diff --git a/rtl/lowlevel/artix7/subtractor32_artix7.v b/rtl/lowlevel/artix7/subtractor32_artix7.v
index b46ac5c..7377781 100644
--- a/rtl/lowlevel/artix7/subtractor32_artix7.v
+++ b/rtl/lowlevel/artix7/subtractor32_artix7.v
@@ -1,94 +1,94 @@
-//------------------------------------------------------------------------------

-//

-// subtractor32_artix7.v

-// -----------------------------------------------------------------------------

-// Hardware (Artix-7 DSP48E1) 32-bit subtractor.

-//

-// Authors: Pavel Shatov

-//

-// Copyright (c) 2016, NORDUnet A/S

-//

-// Redistribution and use in source and binary forms, with or without

-// modification, are permitted provided that the following conditions are met:

-//

-// - Redistributions of source code must retain the above copyright notice,

-//   this list of conditions and the following disclaimer.

-//

-// - Redistributions in binary form must reproduce the above copyright notice,

-//   this list of conditions and the following disclaimer in the documentation

-//   and/or other materials provided with the distribution.

-//

-// - Neither the name of the NORDUnet nor the names of its contributors may be

-//   used to endorse or promote products derived from this software without

-//   specific prior written permission.

-//

-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"

-// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

-// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

-// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE

-// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

-// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

-// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

-// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN

-// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

-// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

-// POSSIBILITY OF SUCH DAMAGE.

-//

-//------------------------------------------------------------------------------

-

-module subtractor32_artix7

-	(

-		input					clk,

-		input		[31: 0]	a,

-		input		[31: 0]	b,

-		output	[31: 0]	d,

-		input					b_in,

-		output				b_out	

-	);

-

-		//

-		// Lower and higher parts of operand

-		//

-	wire	[17: 0]	bl = b[17: 0];

-	wire	[13: 0]	bh = b[31:18];

-	

-		//

-		// DSP48E1 Slice

-		//

-		

-		/* Operation Mode */

-	wire	[ 3: 0]	dsp48e1_alumode	= 4'b0011;

-	wire	[ 6: 0]	dsp48e1_opmode		= 7'b0110011;

-

-		/* Internal Product */	

-	wire	[47: 0]	p_int;

-	

-	dsp48e1_wrapper dsp_subtractor

-	(

-		.clk			(clk),

-	

-		.ce			(1'b1),

-		

-		.carry		(b_in),

-		

-		.alumode		(dsp48e1_alumode),

-		.opmode		(dsp48e1_opmode),

-		

-		.a				({{16{1'b0}}, bh}),

-		.b				(bl),

-		.c				({{16{1'b0}}, a}),

-		

-		.p				(p_int)

-	);

-

-		//

-		// Output Mapping

-		//

-	assign d 		= p_int[31: 0];

-	assign b_out	= p_int[32];

-

-endmodule

-

-//------------------------------------------------------------------------------

-// End-of-File

-//------------------------------------------------------------------------------

+//------------------------------------------------------------------------------
+//
+// subtractor32_artix7.v
+// -----------------------------------------------------------------------------
+// Hardware (Artix-7 DSP48E1) 32-bit subtractor.
+//
+// Authors: Pavel Shatov
+//
+// Copyright (c) 2016, NORDUnet A/S
+//
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are met:
+//
+// - Redistributions of source code must retain the above copyright notice,
+//   this list of conditions and the following disclaimer.
+//
+// - Redistributions in binary form must reproduce the above copyright notice,
+//   this list of conditions and the following disclaimer in the documentation
+//   and/or other materials provided with the distribution.
+//
+// - Neither the name of the NORDUnet nor the names of its contributors may be
+//   used to endorse or promote products derived from this software without
+//   specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+// POSSIBILITY OF SUCH DAMAGE.
+//
+//------------------------------------------------------------------------------
+
+module subtractor32_artix7
+  (
+   input 	  clk,
+   input [31: 0]  a,
+   input [31: 0]  b,
+   output [31: 0] d,
+   input 	  b_in,
+   output 	  b_out
+   );
+
+   //
+   // Lower and higher parts of operand
+   //
+   wire [17: 0]   bl = b[17: 0];
+   wire [13: 0]   bh = b[31:18];
+
+   //
+   // DSP48E1 Slice
+   //
+
+   /* Operation Mode */
+   wire [ 3: 0]   dsp48e1_alumode	= 4'b0011;
+   wire [ 6: 0]   dsp48e1_opmode		= 7'b0110011;
+
+   /* Internal Product */
+   wire [47: 0]   p_int;
+
+   dsp48e1_wrapper dsp_subtractor
+     (
+      .clk			(clk),
+
+      .ce			(1'b1),
+
+      .carry		(b_in),
+
+      .alumode		(dsp48e1_alumode),
+      .opmode		(dsp48e1_opmode),
+
+      .a				({{16{1'b0}}, bh}),
+      .b				(bl),
+      .c				({{16{1'b0}}, a}),
+
+      .p				(p_int)
+      );
+
+   //
+   // Output Mapping
+   //
+   assign d 		= p_int[31: 0];
+   assign b_out	= p_int[32];
+
+endmodule
+
+//------------------------------------------------------------------------------
+// End-of-File
+//------------------------------------------------------------------------------
diff --git a/rtl/lowlevel/ecdsa_lowlevel_settings.v b/rtl/lowlevel/ecdsa_lowlevel_settings.v
index 8f95e2f..c04a14f 100644
--- a/rtl/lowlevel/ecdsa_lowlevel_settings.v
+++ b/rtl/lowlevel/ecdsa_lowlevel_settings.v
@@ -1,17 +1,17 @@
-`define USE_VENDOR_PRIMITIVES

-

-`ifdef USE_VENDOR_PRIMITIVES

-

-`define MAC16_PRIMITIVE				mac16_artix7

-`define ADDER32_PRIMITIVE			adder32_artix7

-`define ADDER47_PRIMITIVE			adder47_artix7

-`define SUBTRACTOR32_PRIMITIVE	subtractor32_artix7

-

-`else

-

-`define MAC16_PRIMITIVE				mac16_generic

-`define ADDER32_PRIMITIVE			adder32_generic

-`define ADDER47_PRIMITIVE			adder47_generic

-`define SUBTRACTOR32_PRIMITIVE	subtractor32_generic

-

-`endif

+`define USE_VENDOR_PRIMITIVES
+
+`ifdef USE_VENDOR_PRIMITIVES
+
+`define MAC16_PRIMITIVE				mac16_artix7
+`define ADDER32_PRIMITIVE			adder32_artix7
+`define ADDER47_PRIMITIVE			adder47_artix7
+`define SUBTRACTOR32_PRIMITIVE	subtractor32_artix7
+
+`else
+
+`define MAC16_PRIMITIVE				mac16_generic
+`define ADDER32_PRIMITIVE			adder32_generic
+`define ADDER47_PRIMITIVE			adder47_generic
+`define SUBTRACTOR32_PRIMITIVE	subtractor32_generic
+
+`endif
diff --git a/rtl/lowlevel/generic/adder32_generic.v b/rtl/lowlevel/generic/adder32_generic.v
index b9c94aa..eadfb6f 100644
--- a/rtl/lowlevel/generic/adder32_generic.v
+++ b/rtl/lowlevel/generic/adder32_generic.v
@@ -2,7 +2,7 @@
 //
 // adder32_generic.v
 // -----------------------------------------------------------------------------
-// Generic 32-bit adder.

+// Generic 32-bit adder.
 //
 // Authors: Pavel Shatov
 //
@@ -34,34 +34,34 @@
 // ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 // POSSIBILITY OF SUCH DAMAGE.
 //
-//------------------------------------------------------------------------------

-

-module adder32_generic

-	(

-		input					clk,		// clock

-		input		[31: 0]	a,			// operand input

-		input		[31: 0]	b,			// operand input

-		output	[31: 0]	s,			// sum output

-		input					c_in,		// carry input

-		output				c_out		// carry output

-	);

-	
-		//
-		// Sum
-		//
-	reg	[32: 0]	s_int;

-	

-	always @(posedge clk)

-		s_int <= {1'b0, a} + {1'b0, b} + {{32{1'b0}}, c_in};

-		

-		//

-		// Output

-		//

-	assign s = s_int[31:0];

-	assign c_out = s_int[32];

-		

-endmodule

-

+//------------------------------------------------------------------------------
+
+module adder32_generic
+  (
+   input 	  clk, // clock
+   input [31: 0]  a, // operand input
+   input [31: 0]  b, // operand input
+   output [31: 0] s, // sum output
+   input 	  c_in, // carry input
+   output 	  c_out		// carry output
+   );
+
+   //
+   // Sum
+   //
+   reg [32: 0] 	  s_int;
+
+   always @(posedge clk)
+     s_int <= {1'b0, a} + {1'b0, b} + {{32{1'b0}}, c_in};
+
+   //
+   // Output
+   //
+   assign s = s_int[31:0];
+   assign c_out = s_int[32];
+
+endmodule
+
 //------------------------------------------------------------------------------
 // End-of-File
-//------------------------------------------------------------------------------

+//------------------------------------------------------------------------------
diff --git a/rtl/lowlevel/generic/adder47_generic.v b/rtl/lowlevel/generic/adder47_generic.v
index f472061..406c175 100644
--- a/rtl/lowlevel/generic/adder47_generic.v
+++ b/rtl/lowlevel/generic/adder47_generic.v
@@ -2,7 +2,7 @@
 //
 // adder47_generic.v
 // -----------------------------------------------------------------------------
-// Generic 47-bit adder.

+// Generic 47-bit adder.
 //
 // Authors: Pavel Shatov
 //
@@ -34,31 +34,31 @@
 // ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 // POSSIBILITY OF SUCH DAMAGE.
 //
-//------------------------------------------------------------------------------

-

-module adder47_generic

-	(

-		input					clk,		// clock

-		input		[46: 0]	a,			// operand input

-		input		[46: 0]	b,			// operand input

-		output	[46: 0]	s			// sum output

-	);

-	

-		//
-		// Sum
-		//
-	reg	[46: 0]	s_int;

-	

-	always @(posedge clk)

-		s_int <= a + b;

-		

-		//

-		// Output

-		//

-	assign s = s_int;

-

-endmodule

-

+//------------------------------------------------------------------------------
+
+module adder47_generic
+  (
+   input 	  clk, // clock
+   input [46: 0]  a, // operand input
+   input [46: 0]  b, // operand input
+   output [46: 0] s			// sum output
+   );
+
+   //
+   // Sum
+   //
+   reg [46: 0] 	  s_int;
+
+   always @(posedge clk)
+     s_int <= a + b;
+
+   //
+   // Output
+   //
+   assign s = s_int;
+
+endmodule
+
 //------------------------------------------------------------------------------
 // End-of-File
-//------------------------------------------------------------------------------

+//------------------------------------------------------------------------------
diff --git a/rtl/lowlevel/generic/mac16_generic.v b/rtl/lowlevel/generic/mac16_generic.v
index dc95645..6d120a3 100644
--- a/rtl/lowlevel/generic/mac16_generic.v
+++ b/rtl/lowlevel/generic/mac16_generic.v
@@ -2,7 +2,7 @@
 //
 // mac16_generic.v
 // -----------------------------------------------------------------------------
-// Generic 16-bit multiplier and 47-bit accumulator.

+// Generic 16-bit multiplier and 47-bit accumulator.
 //
 // Authors: Pavel Shatov
 //
@@ -34,41 +34,41 @@
 // ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 // POSSIBILITY OF SUCH DAMAGE.
 //
-//------------------------------------------------------------------------------

-

-module mac16_generic

-	(

-		input					clk,		// clock

-		input					clr,		// clear accumulator (active-high)

-		input					ce,		// enable clock (active-high)

-		input		[15: 0]	a,			// operand input

-		input		[15: 0]	b,			// operand input

-		output	[46: 0]	s			// sum output

-	);

-	

-		//

-		// Multiplier

-		//

-	wire	[31: 0]	p = {{16{1'b0}}, a} * {{16{1'b0}}, b};

-	wire	[46: 0]	p_ext = {{15{1'b0}}, p};

-		

-		//

-		// Accumulator

-		//

-	reg	[46: 0]	s_int;

-	

-	always @(posedge clk)

-		//

-		if (ce) s_int <= clr ? p_ext : p_ext + s_int;

-		

-		//

-		// Output

-		//

-	assign s = s_int;

-

-endmodule

-

-

+//------------------------------------------------------------------------------
+
+module mac16_generic
+  (
+   input 	  clk, // clock
+   input 	  clr, // clear accumulator (active-high)
+   input 	  ce, // enable clock (active-high)
+   input [15: 0]  a, // operand input
+   input [15: 0]  b, // operand input
+   output [46: 0] s			// sum output
+   );
+
+   //
+   // Multiplier
+   //
+   wire [31: 0]   p = {{16{1'b0}}, a} * {{16{1'b0}}, b};
+   wire [46: 0]   p_ext = {{15{1'b0}}, p};
+
+   //
+   // Accumulator
+   //
+   reg [46: 0] 	  s_int;
+
+   always @(posedge clk)
+     //
+     if (ce) s_int <= clr ? p_ext : p_ext + s_int;
+
+   //
+   // Output
+   //
+   assign s = s_int;
+
+endmodule
+
+
 //------------------------------------------------------------------------------
 // End-of-File
-//------------------------------------------------------------------------------

+//------------------------------------------------------------------------------
diff --git a/rtl/lowlevel/generic/subtractor32_generic.v b/rtl/lowlevel/generic/subtractor32_generic.v
index 46aefe8..5137ace 100644
--- a/rtl/lowlevel/generic/subtractor32_generic.v
+++ b/rtl/lowlevel/generic/subtractor32_generic.v
@@ -1,67 +1,67 @@
-//------------------------------------------------------------------------------

-//

-// subtractor32_generic.v

-// -----------------------------------------------------------------------------

-// Generic 32-bit subtractor.

-//

-// Authors: Pavel Shatov

-//

-// Copyright (c) 2016, NORDUnet A/S

-//

-// Redistribution and use in source and binary forms, with or without

-// modification, are permitted provided that the following conditions are met:

-//

-// - Redistributions of source code must retain the above copyright notice,

-//   this list of conditions and the following disclaimer.

-//

-// - Redistributions in binary form must reproduce the above copyright notice,

-//   this list of conditions and the following disclaimer in the documentation

-//   and/or other materials provided with the distribution.

-//

-// - Neither the name of the NORDUnet nor the names of its contributors may be

-//   used to endorse or promote products derived from this software without

-//   specific prior written permission.

-//

-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"

-// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

-// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

-// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE

-// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

-// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

-// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

-// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN

-// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

-// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

-// POSSIBILITY OF SUCH DAMAGE.

-//

-//------------------------------------------------------------------------------

-

-module subtractor32_generic

-	(

-		input					clk,

-		input		[31: 0]	a,

-		input		[31: 0]	b,

-		output	[31: 0]	d,

-		input					b_in,

-		output				b_out	

-	);

-

-		//
-		// Difference
-		//
-	reg	[32: 0]	d_int;

-	

-	always @(posedge clk)

-		d_int <= {1'b0, a} - {1'b0, b} - {{32{1'b0}}, b_in};

-		

-		//

-		// Output

-		//

-	assign d = d_int[31:0];

-	assign b_out = d_int[32];

-

-endmodule

-

-//------------------------------------------------------------------------------

-// End-of-File

-//------------------------------------------------------------------------------

+//------------------------------------------------------------------------------
+//
+// subtractor32_generic.v
+// -----------------------------------------------------------------------------
+// Generic 32-bit subtractor.
+//
+// Authors: Pavel Shatov
+//
+// Copyright (c) 2016, NORDUnet A/S
+//
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are met:
+//
+// - Redistributions of source code must retain the above copyright notice,
+//   this list of conditions and the following disclaimer.
+//
+// - Redistributions in binary form must reproduce the above copyright notice,
+//   this list of conditions and the following disclaimer in the documentation
+//   and/or other materials provided with the distribution.
+//
+// - Neither the name of the NORDUnet nor the names of its contributors may be
+//   used to endorse or promote products derived from this software without
+//   specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+// POSSIBILITY OF SUCH DAMAGE.
+//
+//------------------------------------------------------------------------------
+
+module subtractor32_generic
+  (
+   input 	  clk,
+   input [31: 0]  a,
+   input [31: 0]  b,
+   output [31: 0] d,
+   input 	  b_in,
+   output 	  b_out
+   );
+
+   //
+   // Difference
+   //
+   reg [32: 0] 	  d_int;
+
+   always @(posedge clk)
+     d_int <= {1'b0, a} - {1'b0, b} - {{32{1'b0}}, b_in};
+
+   //
+   // Output
+   //
+   assign d = d_int[31:0];
+   assign b_out = d_int[32];
+
+endmodule
+
+//------------------------------------------------------------------------------
+// End-of-File
+//------------------------------------------------------------------------------
diff --git a/rtl/lowlevel/mac16_wrapper.v b/rtl/lowlevel/mac16_wrapper.v
index b91e518..89dbba1 100644
--- a/rtl/lowlevel/mac16_wrapper.v
+++ b/rtl/lowlevel/mac16_wrapper.v
@@ -2,7 +2,7 @@
 //
 // mac16_wrapper.v
 // -----------------------------------------------------------------------------
-// Wrapper for 16-bit multiplier and 48-bit accumulator.

+// Wrapper for 16-bit multiplier and 48-bit accumulator.
 //
 // Authors: Pavel Shatov
 //
@@ -34,42 +34,42 @@
 // ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 // POSSIBILITY OF SUCH DAMAGE.
 //
-//------------------------------------------------------------------------------

-

-module mac16_wrapper

-	(

-		input					clk,		// clock

-		input					clr,		// clear accumulator (active-high)

-		input					ce,		// enable clock (active-high)

-		input		[15: 0]	a,			// operand input

-		input		[15: 0]	b,			// operand input

-		output	[46: 0]	s			// sum output

-	);

-	

-			

-		//
-		// Include Primitive Selector
-		//
+//------------------------------------------------------------------------------
+
+module mac16_wrapper
+  (
+   input 	  clk, // clock
+   input 	  clr, // clear accumulator (active-high)
+   input 	  ce, // enable clock (active-high)
+   input [15: 0]  a, // operand input
+   input [15: 0]  b, // operand input
+   output [46: 0] s			// sum output
+   );
+
+
+   //
+   // Include Primitive Selector
+   //
 `include "ecdsa_lowlevel_settings.v"
 
 
-		//
-		// Instantiate Vendor/Generic Primitive
-		//
-	`MAC16_PRIMITIVE mac16_inst
-	(
-		.clk(clk),
-		.clr(clr),
-		.ce(ce),
-		.a(a),
-		.b(b),
-		.s(s)
-	);

-	

-

-endmodule

-

-

+   //
+   // Instantiate Vendor/Generic Primitive
+   //
+   `MAC16_PRIMITIVE mac16_inst
+     (
+      .clk(clk),
+      .clr(clr),
+      .ce(ce),
+      .a(a),
+      .b(b),
+      .s(s)
+      );
+
+
+endmodule
+
+
 //------------------------------------------------------------------------------
 // End-of-File
-//------------------------------------------------------------------------------

+//------------------------------------------------------------------------------
diff --git a/rtl/lowlevel/subtractor32_wrapper.v b/rtl/lowlevel/subtractor32_wrapper.v
index 3c7e5e9..063e753 100644
--- a/rtl/lowlevel/subtractor32_wrapper.v
+++ b/rtl/lowlevel/subtractor32_wrapper.v
@@ -1,72 +1,72 @@
-//------------------------------------------------------------------------------

-//

-// subtractor32_wrapper.v

-// -----------------------------------------------------------------------------

-// Wrapper for 32-bit subtractor.

-//

-// Authors: Pavel Shatov

-//

-// Copyright (c) 2016, NORDUnet A/S

-//

-// Redistribution and use in source and binary forms, with or without

-// modification, are permitted provided that the following conditions are met:

-//

-// - Redistributions of source code must retain the above copyright notice,

-//   this list of conditions and the following disclaimer.

-//

-// - Redistributions in binary form must reproduce the above copyright notice,

-//   this list of conditions and the following disclaimer in the documentation

-//   and/or other materials provided with the distribution.

-//

-// - Neither the name of the NORDUnet nor the names of its contributors may be

-//   used to endorse or promote products derived from this software without

-//   specific prior written permission.

-//

-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"

-// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

-// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

-// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE

-// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

-// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

-// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

-// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN

-// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

-// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

-// POSSIBILITY OF SUCH DAMAGE.

-//

-//------------------------------------------------------------------------------

-

-module subtractor32_wrapper

-	(

-		input					clk,

-		input		[31: 0]	a,

-		input		[31: 0]	b,

-		output	[31: 0]	d,

-		input					b_in,

-		output				b_out	

-	);

-

-			//
-		// Include Primitive Selector
-		//
+//------------------------------------------------------------------------------
+//
+// subtractor32_wrapper.v
+// -----------------------------------------------------------------------------
+// Wrapper for 32-bit subtractor.
+//
+// Authors: Pavel Shatov
+//
+// Copyright (c) 2016, NORDUnet A/S
+//
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are met:
+//
+// - Redistributions of source code must retain the above copyright notice,
+//   this list of conditions and the following disclaimer.
+//
+// - Redistributions in binary form must reproduce the above copyright notice,
+//   this list of conditions and the following disclaimer in the documentation
+//   and/or other materials provided with the distribution.
+//
+// - Neither the name of the NORDUnet nor the names of its contributors may be
+//   used to endorse or promote products derived from this software without
+//   specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+// POSSIBILITY OF SUCH DAMAGE.
+//
+//------------------------------------------------------------------------------
+
+module subtractor32_wrapper
+  (
+   input 	  clk,
+   input [31: 0]  a,
+   input [31: 0]  b,
+   output [31: 0] d,
+   input 	  b_in,
+   output 	  b_out
+   );
+
+   //
+   // Include Primitive Selector
+   //
 `include "ecdsa_lowlevel_settings.v"
 
 
-		//
-		// Instantiate Vendor/Generic Primitive
-		//
-	`SUBTRACTOR32_PRIMITIVE subtractor32_inst
-	(
-		.clk(clk),
-		.a(a),
-		.b(b),
-		.d(d),
-		.b_in(b_in),
-		.b_out(b_out)
-	);

-

-endmodule

-

-//------------------------------------------------------------------------------

-// End-of-File

-//------------------------------------------------------------------------------

+   //
+   // Instantiate Vendor/Generic Primitive
+   //
+   `SUBTRACTOR32_PRIMITIVE subtractor32_inst
+     (
+      .clk(clk),
+      .a(a),
+      .b(b),
+      .d(d),
+      .b_in(b_in),
+      .b_out(b_out)
+      );
+
+endmodule
+
+//------------------------------------------------------------------------------
+// End-of-File
+//------------------------------------------------------------------------------
diff --git a/rtl/modular/modular_adder.v b/rtl/modular/modular_adder.v
index 5641feb..189059d 100644
--- a/rtl/modular/modular_adder.v
+++ b/rtl/modular/modular_adder.v
@@ -2,7 +2,7 @@
 //
 // modular_adder.v
 // -----------------------------------------------------------------------------
-// Modular adder.

+// Modular adder.
 //
 // Authors: Pavel Shatov
 //
@@ -34,265 +34,265 @@
 // ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 // POSSIBILITY OF SUCH DAMAGE.
 //
-//------------------------------------------------------------------------------

-

-module modular_adder

-	(

-		clk, rst_n,

-		ena, rdy,

-		ab_addr, n_addr, s_addr, s_wren,
-		a_din, b_din, n_din, s_dout

-	);

-

-

-		//

-		// Parameters

-		//

-	parameter	OPERAND_NUM_WORDS		= 8;

-	parameter	WORD_COUNTER_WIDTH	= 3;

-	

-	

-		//
-		// Handy Numbers
-		//
-	localparam	[WORD_COUNTER_WIDTH-1:0]	WORD_INDEX_ZERO	= 0;
-	localparam	[WORD_COUNTER_WIDTH-1:0]	WORD_INDEX_LAST	= OPERAND_NUM_WORDS - 1;

-	

-	

-		//
-		// Handy Functions
-		//
-	function	[WORD_COUNTER_WIDTH-1:0]	WORD_INDEX_NEXT_OR_ZERO;
-		input	[WORD_COUNTER_WIDTH-1:0]	WORD_INDEX_CURRENT;
-		begin
-			WORD_INDEX_NEXT_OR_ZERO = (WORD_INDEX_CURRENT < WORD_INDEX_LAST) ?
-				WORD_INDEX_CURRENT + 1'b1 : WORD_INDEX_ZERO;
-		end
-	endfunction

-	

-	

-		//
-		// Ports
-		//
-	input		wire										clk;			// system clock
-	input		wire										rst_n;		// active-low async reset
-	
-	input		wire										ena;			// enable input
-	output	wire										rdy;			// ready output
-	

-	output	wire	[WORD_COUNTER_WIDTH-1:0]	ab_addr;		// index of current A and B words

-	output	wire	[WORD_COUNTER_WIDTH-1:0]	n_addr;		// index of current N word

-	output	wire	[WORD_COUNTER_WIDTH-1:0]	s_addr;		// index of current S word

-	output	wire										s_wren;		// store current S word now

-	
-	input		wire	[                  31:0]	a_din;		// A
-	input		wire	[                  31:0]	b_din;		// B
-	input		wire	[                  31:0]	n_din;		// N
-	output	wire	[                  31:0]	s_dout;		// S = (A + B) mod N

-	

-	

-		//

-		// Word Indices

-		//

-	reg	[WORD_COUNTER_WIDTH-1:0]	index_ab;

-	reg	[WORD_COUNTER_WIDTH-1:0]	index_n;

-	reg	[WORD_COUNTER_WIDTH-1:0]	index_s;

-

-		/* map registers to output ports */

-	assign ab_addr	= index_ab;

-	assign n_addr	= index_n;

-	assign s_addr	= index_s;

-

-

-		//

-		// Adder

-		//

-	wire	[31: 0]	add32_s;

-	wire				add32_c_in;

-	wire				add32_c_out;

-	

-	adder32_wrapper adder32

-	(
-		.clk		(clk),
-		.a			(a_din),
-		.b			(b_din),
-		.s			(add32_s),
-		.c_in		(add32_c_in),
-		.c_out	(add32_c_out)
-	);

-	

-	

-		//

-		// Subtractor

-		//

-	wire	[31: 0]	sub32_d;

-	wire				sub32_b_in;

-	wire				sub32_b_out;

-	

-	subtractor32_wrapper subtractor32

-	(
-		.clk		(clk),
-		.a			(add32_s),
-		.b			(n_din),
-		.d			(sub32_d),
-		.b_in		(sub32_b_in),
-		.b_out	(sub32_b_out)
-	);

-	

-	

-		//

-		// FSM

-		//

-		

-	localparam FSM_SHREG_WIDTH = 2*OPERAND_NUM_WORDS + 5;

-	

-	reg	[FSM_SHREG_WIDTH-1:0]	fsm_shreg;

-	

-	assign rdy = fsm_shreg[0];

-	

-	wire [OPERAND_NUM_WORDS-1:0] fsm_shreg_inc_index_ab	= fsm_shreg[FSM_SHREG_WIDTH - (0 * OPERAND_NUM_WORDS + 1) : FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 0)];

-	wire [OPERAND_NUM_WORDS-1:0] fsm_shreg_inc_index_n		= fsm_shreg[FSM_SHREG_WIDTH - (0 * OPERAND_NUM_WORDS + 2) : FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 1)];

-	wire [OPERAND_NUM_WORDS-1:0] fsm_shreg_store_sum_ab	= fsm_shreg[FSM_SHREG_WIDTH - (0 * OPERAND_NUM_WORDS + 3) : FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 2)];

-	wire [OPERAND_NUM_WORDS-1:0] fsm_shreg_store_sum_ab_n	= fsm_shreg[FSM_SHREG_WIDTH - (0 * OPERAND_NUM_WORDS + 4) : FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 3)];

-	wire [OPERAND_NUM_WORDS-1:0] fsm_shreg_store_data_s	= fsm_shreg[FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 4) : FSM_SHREG_WIDTH - (2 * OPERAND_NUM_WORDS + 3)];

-	wire [OPERAND_NUM_WORDS-1:0] fsm_shreg_inc_index_s		= fsm_shreg[FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 5) : FSM_SHREG_WIDTH - (2 * OPERAND_NUM_WORDS + 4)];

-	

-	wire fsm_latch_msb_carry	= fsm_shreg[FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 2)];

-	wire fsm_latch_msb_borrow	= fsm_shreg[FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 3)];

-	

-	wire inc_index_ab		= |fsm_shreg_inc_index_ab;

-	wire inc_index_n		= |fsm_shreg_inc_index_n;

-	wire store_sum_ab		= |fsm_shreg_store_sum_ab;

-	wire store_sum_ab_n	= |fsm_shreg_store_sum_ab_n;

-	wire store_data_s		= |fsm_shreg_store_data_s;

-	wire inc_index_s		= |fsm_shreg_inc_index_s;

-	

-	always @(posedge clk or negedge rst_n)
-		//
-		if (rst_n == 1'b0)

-			//

-			fsm_shreg <= {{FSM_SHREG_WIDTH-1{1'b0}}, 1'b1};

-			//

-		else begin

-			//

-			if (rdy)	fsm_shreg <= {ena, {FSM_SHREG_WIDTH-2{1'b0}}, ~ena};

-			//

-			else		fsm_shreg <= {1'b0, fsm_shreg[FSM_SHREG_WIDTH-1:1]};

-			//

-		end

-		

-		

-		

-		

-	

-	

-	

-		//

-		// Carry & Borrow Masking Logic

-		//

-	reg	add32_c_mask;

-	reg	sub32_b_mask;

-	

-	always @(posedge clk) begin

-		//

-		add32_c_mask <= (index_ab == WORD_INDEX_ZERO) ? 1'b1 : 1'b0;

-		sub32_b_mask <= (index_n  == WORD_INDEX_ZERO) ? 1'b1 : 1'b0;

-		//

-	end

-		

-	assign add32_c_in = add32_c_out & ~add32_c_mask;

-	assign sub32_b_in = sub32_b_out & ~sub32_b_mask;

-	

-	

-		//

-		// Carry & Borrow Latch Logic

-		//

-	reg add32_carry_latch;

-	reg sub32_borrow_latch;

-	

-	always @(posedge clk) begin

-		//

-		if (fsm_latch_msb_carry) add32_carry_latch <= add32_c_out;

-		if (fsm_latch_msb_borrow) sub32_borrow_latch <= sub32_b_out;

-		//

-	end

-

-		

-		//

-		// Intermediate Results

-		//

-	reg	[32*OPERAND_NUM_WORDS-1:0]		s_ab;

-	reg	[32*OPERAND_NUM_WORDS-1:0]		s_ab_n;

-	

-	always @(posedge clk)

-		//

-		if (store_data_s) begin

-			//

-			s_ab		<= {{32{1'bX}}, s_ab[32*OPERAND_NUM_WORDS-1:32]};

-			s_ab_n	<= {{32{1'bX}}, s_ab_n[32*OPERAND_NUM_WORDS-1:32]};		

-			//

-		end else begin

-			//

-			if (store_sum_ab) s_ab <= {add32_s, s_ab[32*OPERAND_NUM_WORDS-1:32]};

-			if (store_sum_ab_n) s_ab_n <= {sub32_d, s_ab_n[32*OPERAND_NUM_WORDS-1:32]};

-			//

-		end

-	

-	

-		//
-		// Word Index Increment Logic
-		//

-	always @(posedge clk)
-		//

-		if (rdy) begin

-			//

-			index_ab		<= WORD_INDEX_ZERO;

-			index_n		<= WORD_INDEX_ZERO;

-			index_s		<= WORD_INDEX_ZERO;

-			//

-		end else begin

-			//

-			if (inc_index_ab) index_ab <= WORD_INDEX_NEXT_OR_ZERO(index_ab);

-			if (inc_index_n)	index_n	<= WORD_INDEX_NEXT_OR_ZERO(index_n);

-			if (inc_index_s)	index_s	<= WORD_INDEX_NEXT_OR_ZERO(index_s);

-			//

-		end

-	

-	

-			//

-			// Output Sum Selector

-			//

-	wire	mux_select_ab = sub32_borrow_latch && !add32_carry_latch;

-			

-	

-			//

-			// Output Data and Write Enable Logic

-			//

-	reg				s_wren_reg;

-	reg	[31: 0]	s_dout_reg;

-	wire	[31: 0]	s_dout_mux = mux_select_ab ? s_ab[31:0] : s_ab_n[31:0];

-	

-	assign s_wren = s_wren_reg;

-	assign s_dout = s_dout_reg;

-	

-	always @(posedge clk)
-		//

-		if (rdy) begin

-			//

-			s_wren_reg	<= 1'b0;

-			s_dout_reg	<= {32{1'bX}};

-			//

-		end else begin

-			//

-			s_wren_reg <= store_data_s;

-			s_dout_reg <= store_data_s ? s_dout_mux : {32{1'bX}};

-			//

-		end			

-

-	

-endmodule

-

-

+//------------------------------------------------------------------------------
+
+module modular_adder
+  (
+   clk, rst_n,
+   ena, rdy,
+   ab_addr, n_addr, s_addr, s_wren,
+   a_din, b_din, n_din, s_dout
+   );
+
+
+   //
+   // Parameters
+   //
+   parameter	OPERAND_NUM_WORDS	= 8;
+   parameter	WORD_COUNTER_WIDTH	= 3;
+
+
+   //
+   // Handy Numbers
+   //
+   localparam	[WORD_COUNTER_WIDTH-1:0]	WORD_INDEX_ZERO	= 0;
+   localparam	[WORD_COUNTER_WIDTH-1:0]	WORD_INDEX_LAST	= OPERAND_NUM_WORDS - 1;
+
+
+   //
+   // Handy Functions
+   //
+   function	[WORD_COUNTER_WIDTH-1:0]	WORD_INDEX_NEXT_OR_ZERO;
+      input	[WORD_COUNTER_WIDTH-1:0]	WORD_INDEX_CURRENT;
+      begin
+	 WORD_INDEX_NEXT_OR_ZERO = (WORD_INDEX_CURRENT < WORD_INDEX_LAST) ?
+				   WORD_INDEX_CURRENT + 1'b1 : WORD_INDEX_ZERO;
+      end
+   endfunction
+
+
+   //
+   // Ports
+   //
+   input		wire										clk;			// system clock
+   input		wire										rst_n;		// active-low async reset
+
+   input		wire										ena;			// enable input
+   output	wire 											rdy;			// ready output
+
+   output	wire [WORD_COUNTER_WIDTH-1:0] 								ab_addr;		// index of current A and B words
+   output	wire [WORD_COUNTER_WIDTH-1:0] 								n_addr;		// index of current N word
+   output	wire [WORD_COUNTER_WIDTH-1:0] 								s_addr;		// index of current S word
+   output	wire 											s_wren;		// store current S word now
+
+   input		wire [                  31:0] 							a_din;		// A
+   input		wire [                  31:0] 							b_din;		// B
+   input		wire [                  31:0] 							n_din;		// N
+   output	wire [                  31:0] 								s_dout;		// S = (A + B) mod N
+
+
+   //
+   // Word Indices
+   //
+   reg [WORD_COUNTER_WIDTH-1:0] 									index_ab;
+   reg [WORD_COUNTER_WIDTH-1:0] 									index_n;
+   reg [WORD_COUNTER_WIDTH-1:0] 									index_s;
+
+   /* map registers to output ports */
+   assign ab_addr	= index_ab;
+   assign n_addr	= index_n;
+   assign s_addr	= index_s;
+
+
+   //
+   // Adder
+   //
+   wire [31: 0] 											add32_s;
+   wire 												add32_c_in;
+   wire 												add32_c_out;
+
+   adder32_wrapper adder32
+     (
+      .clk		(clk),
+      .a			(a_din),
+      .b			(b_din),
+      .s			(add32_s),
+      .c_in		(add32_c_in),
+      .c_out	(add32_c_out)
+      );
+
+
+   //
+   // Subtractor
+   //
+   wire [31: 0] 											sub32_d;
+   wire 												sub32_b_in;
+   wire 												sub32_b_out;
+
+   subtractor32_wrapper subtractor32
+     (
+      .clk		(clk),
+      .a			(add32_s),
+      .b			(n_din),
+      .d			(sub32_d),
+      .b_in		(sub32_b_in),
+      .b_out	(sub32_b_out)
+      );
+
+
+   //
+   // FSM
+   //
+
+   localparam FSM_SHREG_WIDTH = 2*OPERAND_NUM_WORDS + 5;
+
+   reg [FSM_SHREG_WIDTH-1:0] 										fsm_shreg;
+
+   assign rdy = fsm_shreg[0];
+
+   wire [OPERAND_NUM_WORDS-1:0] 									fsm_shreg_inc_index_ab	= fsm_shreg[FSM_SHREG_WIDTH - (0 * OPERAND_NUM_WORDS + 1) : FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 0)];
+   wire [OPERAND_NUM_WORDS-1:0] 									fsm_shreg_inc_index_n		= fsm_shreg[FSM_SHREG_WIDTH - (0 * OPERAND_NUM_WORDS + 2) : FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 1)];
+   wire [OPERAND_NUM_WORDS-1:0] 									fsm_shreg_store_sum_ab	= fsm_shreg[FSM_SHREG_WIDTH - (0 * OPERAND_NUM_WORDS + 3) : FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 2)];
+   wire [OPERAND_NUM_WORDS-1:0] 									fsm_shreg_store_sum_ab_n	= fsm_shreg[FSM_SHREG_WIDTH - (0 * OPERAND_NUM_WORDS + 4) : FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 3)];
+   wire [OPERAND_NUM_WORDS-1:0] 									fsm_shreg_store_data_s	= fsm_shreg[FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 4) : FSM_SHREG_WIDTH - (2 * OPERAND_NUM_WORDS + 3)];
+   wire [OPERAND_NUM_WORDS-1:0] 									fsm_shreg_inc_index_s		= fsm_shreg[FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 5) : FSM_SHREG_WIDTH - (2 * OPERAND_NUM_WORDS + 4)];
+
+   wire 												fsm_latch_msb_carry	= fsm_shreg[FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 2)];
+   wire 												fsm_latch_msb_borrow	= fsm_shreg[FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 3)];
+
+   wire 												inc_index_ab		= |fsm_shreg_inc_index_ab;
+   wire 												inc_index_n		= |fsm_shreg_inc_index_n;
+   wire 												store_sum_ab		= |fsm_shreg_store_sum_ab;
+   wire 												store_sum_ab_n	= |fsm_shreg_store_sum_ab_n;
+   wire 												store_data_s		= |fsm_shreg_store_data_s;
+   wire 												inc_index_s		= |fsm_shreg_inc_index_s;
+
+   always @(posedge clk or negedge rst_n)
+     //
+     if (rst_n == 1'b0)
+       //
+       fsm_shreg <= {{FSM_SHREG_WIDTH-1{1'b0}}, 1'b1};
+   //
+     else begin
+	//
+	if (rdy)	fsm_shreg <= {ena, {FSM_SHREG_WIDTH-2{1'b0}}, ~ena};
+	//
+	else		fsm_shreg <= {1'b0, fsm_shreg[FSM_SHREG_WIDTH-1:1]};
+	//
+     end
+
+
+
+
+
+
+
+   //
+   // Carry & Borrow Masking Logic
+   //
+   reg	add32_c_mask;
+   reg	sub32_b_mask;
+
+   always @(posedge clk) begin
+      //
+      add32_c_mask <= (index_ab == WORD_INDEX_ZERO) ? 1'b1 : 1'b0;
+      sub32_b_mask <= (index_n  == WORD_INDEX_ZERO) ? 1'b1 : 1'b0;
+      //
+   end
+
+   assign add32_c_in = add32_c_out & ~add32_c_mask;
+   assign sub32_b_in = sub32_b_out & ~sub32_b_mask;
+
+
+   //
+   // Carry & Borrow Latch Logic
+   //
+   reg add32_carry_latch;
+   reg sub32_borrow_latch;
+
+   always @(posedge clk) begin
+      //
+      if (fsm_latch_msb_carry) add32_carry_latch <= add32_c_out;
+      if (fsm_latch_msb_borrow) sub32_borrow_latch <= sub32_b_out;
+      //
+   end
+
+
+   //
+   // Intermediate Results
+   //
+   reg	[32*OPERAND_NUM_WORDS-1:0]		s_ab;
+   reg [32*OPERAND_NUM_WORDS-1:0] 		s_ab_n;
+
+   always @(posedge clk)
+     //
+     if (store_data_s) begin
+	//
+	s_ab		<= {{32{1'bX}}, s_ab[32*OPERAND_NUM_WORDS-1:32]};
+	s_ab_n	<= {{32{1'bX}}, s_ab_n[32*OPERAND_NUM_WORDS-1:32]};
+	//
+     end else begin
+	//
+	if (store_sum_ab) s_ab <= {add32_s, s_ab[32*OPERAND_NUM_WORDS-1:32]};
+	if (store_sum_ab_n) s_ab_n <= {sub32_d, s_ab_n[32*OPERAND_NUM_WORDS-1:32]};
+	//
+     end
+
+
+   //
+   // Word Index Increment Logic
+   //
+   always @(posedge clk)
+     //
+     if (rdy) begin
+	//
+	index_ab		<= WORD_INDEX_ZERO;
+	index_n		<= WORD_INDEX_ZERO;
+	index_s		<= WORD_INDEX_ZERO;
+	//
+     end else begin
+	//
+	if (inc_index_ab) index_ab <= WORD_INDEX_NEXT_OR_ZERO(index_ab);
+	if (inc_index_n)	index_n	<= WORD_INDEX_NEXT_OR_ZERO(index_n);
+	if (inc_index_s)	index_s	<= WORD_INDEX_NEXT_OR_ZERO(index_s);
+	//
+     end
+
+
+   //
+   // Output Sum Selector
+   //
+   wire	mux_select_ab = sub32_borrow_latch && !add32_carry_latch;
+
+
+   //
+   // Output Data and Write Enable Logic
+   //
+   reg 	s_wren_reg;
+   reg [31: 0] s_dout_reg;
+   wire [31: 0] s_dout_mux = mux_select_ab ? s_ab[31:0] : s_ab_n[31:0];
+
+   assign s_wren = s_wren_reg;
+   assign s_dout = s_dout_reg;
+
+   always @(posedge clk)
+     //
+     if (rdy) begin
+	//
+	s_wren_reg	<= 1'b0;
+	s_dout_reg	<= {32{1'bX}};
+	//
+     end else begin
+	//
+	s_wren_reg <= store_data_s;
+	s_dout_reg <= store_data_s ? s_dout_mux : {32{1'bX}};
+	//
+     end
+
+
+endmodule
+
+
 //------------------------------------------------------------------------------
 // End-of-File
-//------------------------------------------------------------------------------

+//------------------------------------------------------------------------------
diff --git a/rtl/modular/modular_invertor/helper/modinv_helper_copy.v b/rtl/modular/modular_invertor/helper/modinv_helper_copy.v
index 07c1b4f..f097362 100644
--- a/rtl/modular/modular_invertor/helper/modinv_helper_copy.v
+++ b/rtl/modular/modular_invertor/helper/modinv_helper_copy.v
@@ -1,148 +1,148 @@
-`timescale 1ns / 1ps

-

-module modinv_helper_copy

-	(

-		clk, rst_n,

-		ena, rdy,

-		s_addr,  s_din,

-		a1_addr,        a1_wren, a1_dout

-	);

-	

-	

-		//

-		// Parameters

-		//

-	parameter OPERAND_NUM_WORDS	= 8;

-	parameter OPERAND_ADDR_BITS	= 3;

-	

-	parameter BUFFER_NUM_WORDS		= 9;

-	parameter BUFFER_ADDR_BITS		= 4;

-	

-	

-		//

-		// clog2

-		//

-`include "..\modinv_clog2.v"

-	

-	

-		//

-		// Constants

-		//

-	localparam PROC_NUM_CYCLES	= OPERAND_NUM_WORDS + 2;

-	localparam PROC_CNT_BITS	= clog2(PROC_NUM_CYCLES);

-	

-	

-		//

-		// Ports

-		//

-	input		wire									clk;

-	input		wire									rst_n;

-	

-	input		wire									ena;

-	output	wire									rdy;

-

-	output	wire	[ BUFFER_ADDR_BITS-1:0]	s_addr;

-	output	wire	[OPERAND_ADDR_BITS-1:0]	a1_addr;

-	

-	output	wire									a1_wren;

-	

-	input		wire	[                 31:0]	s_din;

-

-	output	wire	[                 31:0]	a1_dout;

-

-

-		//

-		// Counter

-		//

-	reg	[PROC_CNT_BITS-1:0]	proc_cnt;

-

-	wire	[PROC_CNT_BITS-1:0]	proc_cnt_max	= PROC_NUM_CYCLES - 1;

-	wire	[PROC_CNT_BITS-1:0]	proc_cnt_zero	= {PROC_CNT_BITS{1'b0}};

-	wire	[PROC_CNT_BITS-1:0]	proc_cnt_next	= (proc_cnt < proc_cnt_max) ?

-																	proc_cnt + 1'b1 : proc_cnt_zero;

-	

-		//

-		// Addresses

-		//

-	reg	[OPERAND_ADDR_BITS-1:0]	addr_s;

-

-	wire	[OPERAND_ADDR_BITS-1:0]	addr_s_max		= OPERAND_NUM_WORDS - 1;

-	wire	[OPERAND_ADDR_BITS-1:0]	addr_s_zero		= {OPERAND_ADDR_BITS{1'b0}};

-	wire	[OPERAND_ADDR_BITS-1:0]	addr_s_next		= (addr_s < addr_s_max) ?

-																		addr_s + 1'b1 : addr_s_zero;

-																		

-	reg	[OPERAND_ADDR_BITS-1:0]	addr_a1;

-	

-	wire	[OPERAND_ADDR_BITS-1:0]	addr_a1_max		= OPERAND_NUM_WORDS - 1;

-	wire	[OPERAND_ADDR_BITS-1:0]	addr_a1_zero	= {OPERAND_ADDR_BITS{1'b0}};

-	wire	[OPERAND_ADDR_BITS-1:0]	addr_a1_next	= (addr_a1 < addr_a1_max) ?

-																		addr_a1 + 1'b1 : addr_a1_zero;

-																		

-	assign s_addr  = {{(BUFFER_ADDR_BITS - OPERAND_ADDR_BITS){1'b0}}, addr_s};

-	assign a1_addr = addr_a1;

-	

-		

-		//

-		// Ready Flag

-		//

-	assign rdy = (proc_cnt == proc_cnt_zero);

-	

-	

-		//

-		// Address Increment Logic

-		//

-	wire	inc_addr_s;

-	wire	inc_addr_a1;

-

-	wire	[PROC_CNT_BITS-1:0]	cnt_inc_addr_s_start		= 1;

-	wire	[PROC_CNT_BITS-1:0]	cnt_inc_addr_s_stop		= OPERAND_NUM_WORDS + 0;

-	

-	wire	[PROC_CNT_BITS-1:0]	cnt_inc_addr_a1_start	= 2;

-	wire	[PROC_CNT_BITS-1:0]	cnt_inc_addr_a1_stop		= OPERAND_NUM_WORDS + 1;

-

-	assign inc_addr_s		= (proc_cnt >= cnt_inc_addr_s_start)  && (proc_cnt <= cnt_inc_addr_s_stop);

-	assign inc_addr_a1	= (proc_cnt >= cnt_inc_addr_a1_start) && (proc_cnt <= cnt_inc_addr_a1_stop);

-	

-	always @(posedge clk) begin

-		//

-		if (inc_addr_s)	addr_s <= addr_s_next;

-		else					addr_s <= addr_s_zero;

-		//

-		if (inc_addr_a1)	addr_a1 <= addr_a1_next;

-		else					addr_a1 <= addr_a1_zero;

-		//

-	end

-	

-	

-		//

-		// Write Enable Logic

-		//

-	wire	wren_a1;

-

-	wire	[PROC_CNT_BITS-1:0]	cnt_wren_a1_start	= 2;

-	wire	[PROC_CNT_BITS-1:0]	cnt_wren_a1_stop	= OPERAND_NUM_WORDS + 1;

-

-	assign wren_a1 = (proc_cnt >= cnt_wren_a1_start) && (proc_cnt <= cnt_wren_a1_stop);

-

-	assign a1_wren = wren_a1;

-	

-	

-		//

-		// Data Logic

-		//

-	assign a1_dout = s_din;

-	

-	

-		//

-		// Primary Counter Logic

-		//

-	always @(posedge clk or negedge rst_n)

-		//

-		if (rst_n == 1'b0) proc_cnt <= proc_cnt_zero;

-		else begin

-			if (!rdy)		proc_cnt <= proc_cnt_next;

-			else if (ena)	proc_cnt <= proc_cnt_next;

-		end

-

-

-endmodule

+`timescale 1ns / 1ps
+
+module modinv_helper_copy
+  (
+   clk, rst_n,
+   ena, rdy,
+   s_addr,  s_din,
+   a1_addr,        a1_wren, a1_dout
+   );
+
+
+   //
+   // Parameters
+   //
+   parameter OPERAND_NUM_WORDS	= 8;
+   parameter OPERAND_ADDR_BITS	= 3;
+
+   parameter BUFFER_NUM_WORDS		= 9;
+   parameter BUFFER_ADDR_BITS		= 4;
+
+
+   //
+   // clog2
+   //
+`include "../modinv_clog2.v"
+
+
+   //
+   // Constants
+   //
+   localparam PROC_NUM_CYCLES	= OPERAND_NUM_WORDS + 2;
+   localparam PROC_CNT_BITS	= clog2(PROC_NUM_CYCLES);
+
+
+   //
+   // Ports
+   //
+   input		wire									clk;
+   input		wire									rst_n;
+
+   input		wire									ena;
+   output	wire 										rdy;
+
+   output	wire [ BUFFER_ADDR_BITS-1:0] 							s_addr;
+   output	wire [OPERAND_ADDR_BITS-1:0] 							a1_addr;
+
+   output	wire 										a1_wren;
+
+   input		wire [                 31:0] 						s_din;
+
+   output	wire [                 31:0] 							a1_dout;
+
+
+   //
+   // Counter
+   //
+   reg [PROC_CNT_BITS-1:0] 									proc_cnt;
+
+   wire [PROC_CNT_BITS-1:0] 									proc_cnt_max	= PROC_NUM_CYCLES - 1;
+   wire [PROC_CNT_BITS-1:0] 									proc_cnt_zero	= {PROC_CNT_BITS{1'b0}};
+   wire [PROC_CNT_BITS-1:0] 									proc_cnt_next	= (proc_cnt < proc_cnt_max) ?
+												proc_cnt + 1'b1 : proc_cnt_zero;
+
+   //
+   // Addresses
+   //
+   reg [OPERAND_ADDR_BITS-1:0] 									addr_s;
+
+   wire [OPERAND_ADDR_BITS-1:0] 								addr_s_max		= OPERAND_NUM_WORDS - 1;
+   wire [OPERAND_ADDR_BITS-1:0] 								addr_s_zero		= {OPERAND_ADDR_BITS{1'b0}};
+   wire [OPERAND_ADDR_BITS-1:0] 								addr_s_next		= (addr_s < addr_s_max) ?
+												addr_s + 1'b1 : addr_s_zero;
+
+   reg [OPERAND_ADDR_BITS-1:0] 									addr_a1;
+
+   wire [OPERAND_ADDR_BITS-1:0] 								addr_a1_max		= OPERAND_NUM_WORDS - 1;
+   wire [OPERAND_ADDR_BITS-1:0] 								addr_a1_zero	= {OPERAND_ADDR_BITS{1'b0}};
+   wire [OPERAND_ADDR_BITS-1:0] 								addr_a1_next	= (addr_a1 < addr_a1_max) ?
+												addr_a1 + 1'b1 : addr_a1_zero;
+
+   assign s_addr  = {{(BUFFER_ADDR_BITS - OPERAND_ADDR_BITS){1'b0}}, addr_s};
+   assign a1_addr = addr_a1;
+
+
+   //
+   // Ready Flag
+   //
+   assign rdy = (proc_cnt == proc_cnt_zero);
+
+
+   //
+   // Address Increment Logic
+   //
+   wire 											inc_addr_s;
+   wire 											inc_addr_a1;
+
+   wire [PROC_CNT_BITS-1:0] 									cnt_inc_addr_s_start		= 1;
+   wire [PROC_CNT_BITS-1:0] 									cnt_inc_addr_s_stop		= OPERAND_NUM_WORDS + 0;
+
+   wire [PROC_CNT_BITS-1:0] 									cnt_inc_addr_a1_start	= 2;
+   wire [PROC_CNT_BITS-1:0] 									cnt_inc_addr_a1_stop		= OPERAND_NUM_WORDS + 1;
+
+   assign inc_addr_s		= (proc_cnt >= cnt_inc_addr_s_start)  && (proc_cnt <= cnt_inc_addr_s_stop);
+   assign inc_addr_a1	= (proc_cnt >= cnt_inc_addr_a1_start) && (proc_cnt <= cnt_inc_addr_a1_stop);
+
+   always @(posedge clk) begin
+      //
+      if (inc_addr_s)	addr_s <= addr_s_next;
+      else					addr_s <= addr_s_zero;
+      //
+      if (inc_addr_a1)	addr_a1 <= addr_a1_next;
+      else					addr_a1 <= addr_a1_zero;
+      //
+   end
+
+
+   //
+   // Write Enable Logic
+   //
+   wire	wren_a1;
+
+   wire [PROC_CNT_BITS-1:0] cnt_wren_a1_start	= 2;
+   wire [PROC_CNT_BITS-1:0] cnt_wren_a1_stop	= OPERAND_NUM_WORDS + 1;
+
+   assign wren_a1 = (proc_cnt >= cnt_wren_a1_start) && (proc_cnt <= cnt_wren_a1_stop);
+
+   assign a1_wren = wren_a1;
+
+
+   //
+   // Data Logic
+   //
+   assign a1_dout = s_din;
+
+
+   //
+   // Primary Counter Logic
+   //
+   always @(posedge clk or negedge rst_n)
+     //
+     if (rst_n == 1'b0) proc_cnt <= proc_cnt_zero;
+     else begin
+	if (!rdy)		proc_cnt <= proc_cnt_next;
+	else if (ena)	proc_cnt <= proc_cnt_next;
+     end
+
+
+endmodule
diff --git a/rtl/modular/modular_invertor/helper/modinv_helper_init.v b/rtl/modular/modular_invertor/helper/modinv_helper_init.v
index 0468134..5a909c0 100644
--- a/rtl/modular/modular_invertor/helper/modinv_helper_init.v
+++ b/rtl/modular/modular_invertor/helper/modinv_helper_init.v
@@ -1,172 +1,172 @@
-`timescale 1ns / 1ps

-

-module modinv_helper_init

-	(

-		clk, rst_n,

-		ena, rdy,

-		a_addr, a_din,

-		q_addr, q_din,

-		r_addr, r_wren, r_dout,

-		s_addr, s_wren, s_dout,

-		u_addr, u_wren, u_dout,

-		v_addr, v_wren, v_dout

-	);

-	

-	

-		//

-		// Parameters

-		//

-	parameter OPERAND_NUM_WORDS	= 8;

-	parameter OPERAND_ADDR_BITS	= 3;

-	

-	parameter BUFFER_NUM_WORDS		= 9;

-	parameter BUFFER_ADDR_BITS		= 4;

-	

-	

-		//

-		// clog2

-		//

-`include "..\modinv_clog2.v"

-	

-	

-		//

-		// Constants

-		//

-	localparam PROC_NUM_CYCLES	= OPERAND_NUM_WORDS + 3;

-	localparam PROC_CNT_BITS	= clog2(PROC_NUM_CYCLES);

-	

-	

-		//

-		// Ports

-		//

-	input		wire									clk;

-	input		wire									rst_n;

-	input		wire									ena;

-	output	wire									rdy;

-

-	output	wire	[OPERAND_ADDR_BITS-1:0]	a_addr;

-	output	wire	[OPERAND_ADDR_BITS-1:0]	q_addr;

-	output	wire	[ BUFFER_ADDR_BITS-1:0]	r_addr;

-	output	wire	[ BUFFER_ADDR_BITS-1:0]	s_addr;

-	output	wire	[ BUFFER_ADDR_BITS-1:0]	u_addr;

-	output	wire	[ BUFFER_ADDR_BITS-1:0]	v_addr;

-	

-	output	wire									r_wren;

-	output	wire									s_wren;

-	output	wire									u_wren;

-	output	wire									v_wren;

-	

-	input		wire	[                 31:0]	a_din;

-	input		wire	[                 31:0]	q_din;

-	output	wire	[                 31:0]	r_dout;

-	output	wire	[                 31:0]	s_dout;

-	output	wire	[                 31:0]	u_dout;

-	output	wire	[                 31:0]	v_dout;

-

-

-		//

-		// Counter

-		//

-	reg	[PROC_CNT_BITS-1:0]	proc_cnt;

-

-	wire	[PROC_CNT_BITS-1:0]	proc_cnt_max	= PROC_NUM_CYCLES - 1;

-	wire	[PROC_CNT_BITS-1:0]	proc_cnt_zero	= {PROC_CNT_BITS{1'b0}};

-	wire	[PROC_CNT_BITS-1:0]	proc_cnt_next	= (proc_cnt < proc_cnt_max) ?

-																	proc_cnt + 1'b1 : proc_cnt_zero;

-	

-		//

-		// Addresses

-		//

-	reg	[OPERAND_ADDR_BITS-1:0]	addr_aq;

-

-	wire	[OPERAND_ADDR_BITS-1:0]	addr_aq_max		= OPERAND_NUM_WORDS - 1;

-	wire	[OPERAND_ADDR_BITS-1:0]	addr_aq_zero	= {OPERAND_ADDR_BITS{1'b0}};

-	wire	[OPERAND_ADDR_BITS-1:0]	addr_aq_next	= (addr_aq < addr_aq_max) ?

-																		addr_aq + 1'b1 : addr_aq_zero;

-																		

-	reg	[BUFFER_ADDR_BITS-1:0]	addr_rsuv;

-	

-	wire	[BUFFER_ADDR_BITS-1:0]	addr_rsuv_max	= BUFFER_NUM_WORDS - 1;

-	wire	[BUFFER_ADDR_BITS-1:0]	addr_rsuv_zero	= {BUFFER_ADDR_BITS{1'b0}};

-	wire	[BUFFER_ADDR_BITS-1:0]	addr_rsuv_next	= (addr_rsuv < addr_rsuv_max) ?

-																		addr_rsuv + 1'b1 : addr_rsuv_zero;

-																		

-	assign a_addr = addr_aq;

-	assign q_addr = addr_aq;

-	

-	assign r_addr = addr_rsuv;

-	assign s_addr = addr_rsuv;

-	assign u_addr = addr_rsuv;

-	assign v_addr = addr_rsuv;

-	

-		

-		//

-		// Ready Flag

-		//

-	assign rdy = (proc_cnt == proc_cnt_zero);

-	

-	

-		//

-		// Address Increment Logic

-		//

-	wire	inc_addr_aq;

-	wire	inc_addr_rsuv;

-

-	wire	[PROC_CNT_BITS-1:0]	cnt_inc_addr_aq_start	= 1;

-	wire	[PROC_CNT_BITS-1:0]	cnt_inc_addr_aq_stop		= OPERAND_NUM_WORDS;

-	

-	wire	[PROC_CNT_BITS-1:0]	cnt_inc_addr_rsuv_start	= 2;

-	wire	[PROC_CNT_BITS-1:0]	cnt_inc_addr_rsuv_stop	= BUFFER_NUM_WORDS + 1;

-

-	assign inc_addr_aq   = (proc_cnt >= cnt_inc_addr_aq_start)   && (proc_cnt <= cnt_inc_addr_aq_stop);

-	assign inc_addr_rsuv = (proc_cnt >= cnt_inc_addr_rsuv_start) && (proc_cnt <= cnt_inc_addr_rsuv_stop);

-	

-	always @(posedge clk) begin

-		//

-		if (inc_addr_aq)	addr_aq <= addr_aq_next;

-		else					addr_aq <= addr_aq_zero;

-		//

-		if (inc_addr_rsuv)	addr_rsuv <= addr_rsuv_next;

-		else						addr_rsuv <= addr_rsuv_zero;

-		//

-	end

-	

-	

-		//

-		// Write Enable Logic

-		//

-	wire	wren_rsuv;

-

-	wire	[PROC_CNT_BITS-1:0]	cnt_wren_rsuv_start	= 2;

-	wire	[PROC_CNT_BITS-1:0]	cnt_wren_rsuv_stop	= BUFFER_NUM_WORDS + 1;

-

-	assign wren_rsuv = (proc_cnt >= cnt_wren_rsuv_start) && (proc_cnt <= cnt_wren_rsuv_stop);

-

-	assign r_wren = wren_rsuv;

-	assign s_wren = wren_rsuv;

-	assign u_wren = wren_rsuv;

-	assign v_wren = wren_rsuv;

-	

-	

-		//

-		// Data Logic

-		//

-	assign r_dout = 32'd0;

-	assign s_dout = (proc_cnt == cnt_wren_rsuv_start) ? 32'd1 : 32'd0;

-	assign u_dout = (proc_cnt != cnt_wren_rsuv_stop)  ? q_din : 32'd0;

-	assign v_dout = (proc_cnt != cnt_wren_rsuv_stop)  ? a_din : 32'd0;

-	

-	

-		//

-		// Primary Counter Logic

-		//

-	always @(posedge clk or negedge rst_n)

-		//

-		if (rst_n == 1'b0) proc_cnt <= proc_cnt_zero;

-		else begin

-			if (!rdy)		proc_cnt <= proc_cnt_next;

-			else if (ena)	proc_cnt <= proc_cnt_next;

-		end

-

-

-endmodule

+`timescale 1ns / 1ps
+
+module modinv_helper_init
+  (
+   clk, rst_n,
+   ena, rdy,
+   a_addr, a_din,
+   q_addr, q_din,
+   r_addr, r_wren, r_dout,
+   s_addr, s_wren, s_dout,
+   u_addr, u_wren, u_dout,
+   v_addr, v_wren, v_dout
+   );
+
+
+   //
+   // Parameters
+   //
+   parameter OPERAND_NUM_WORDS	= 8;
+   parameter OPERAND_ADDR_BITS	= 3;
+
+   parameter BUFFER_NUM_WORDS		= 9;
+   parameter BUFFER_ADDR_BITS		= 4;
+
+
+   //
+   // clog2
+   //
+`include "../modinv_clog2.v"
+
+
+   //
+   // Constants
+   //
+   localparam PROC_NUM_CYCLES	= OPERAND_NUM_WORDS + 3;
+   localparam PROC_CNT_BITS	= clog2(PROC_NUM_CYCLES);
+
+
+   //
+   // Ports
+   //
+   input		wire									clk;
+   input		wire									rst_n;
+   input		wire									ena;
+   output	wire 										rdy;
+
+   output	wire [OPERAND_ADDR_BITS-1:0] 							a_addr;
+   output	wire [OPERAND_ADDR_BITS-1:0] 							q_addr;
+   output	wire [ BUFFER_ADDR_BITS-1:0] 							r_addr;
+   output	wire [ BUFFER_ADDR_BITS-1:0] 							s_addr;
+   output	wire [ BUFFER_ADDR_BITS-1:0] 							u_addr;
+   output	wire [ BUFFER_ADDR_BITS-1:0] 							v_addr;
+
+   output	wire 										r_wren;
+   output	wire 										s_wren;
+   output	wire 										u_wren;
+   output	wire 										v_wren;
+
+   input		wire [                 31:0] 						a_din;
+   input		wire [                 31:0] 						q_din;
+   output	wire [                 31:0] 							r_dout;
+   output	wire [                 31:0] 							s_dout;
+   output	wire [                 31:0] 							u_dout;
+   output	wire [                 31:0] 							v_dout;
+
+
+   //
+   // Counter
+   //
+   reg [PROC_CNT_BITS-1:0] 									proc_cnt;
+
+   wire [PROC_CNT_BITS-1:0] 									proc_cnt_max	= PROC_NUM_CYCLES - 1;
+   wire [PROC_CNT_BITS-1:0] 									proc_cnt_zero	= {PROC_CNT_BITS{1'b0}};
+   wire [PROC_CNT_BITS-1:0] 									proc_cnt_next	= (proc_cnt < proc_cnt_max) ?
+												proc_cnt + 1'b1 : proc_cnt_zero;
+
+   //
+   // Addresses
+   //
+   reg [OPERAND_ADDR_BITS-1:0] 									addr_aq;
+
+   wire [OPERAND_ADDR_BITS-1:0] 								addr_aq_max		= OPERAND_NUM_WORDS - 1;
+   wire [OPERAND_ADDR_BITS-1:0] 								addr_aq_zero	= {OPERAND_ADDR_BITS{1'b0}};
+   wire [OPERAND_ADDR_BITS-1:0] 								addr_aq_next	= (addr_aq < addr_aq_max) ?
+												addr_aq + 1'b1 : addr_aq_zero;
+
+   reg [BUFFER_ADDR_BITS-1:0] 									addr_rsuv;
+
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_rsuv_max	= BUFFER_NUM_WORDS - 1;
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_rsuv_zero	= {BUFFER_ADDR_BITS{1'b0}};
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_rsuv_next	= (addr_rsuv < addr_rsuv_max) ?
+												addr_rsuv + 1'b1 : addr_rsuv_zero;
+
+   assign a_addr = addr_aq;
+   assign q_addr = addr_aq;
+
+   assign r_addr = addr_rsuv;
+   assign s_addr = addr_rsuv;
+   assign u_addr = addr_rsuv;
+   assign v_addr = addr_rsuv;
+
+
+   //
+   // Ready Flag
+   //
+   assign rdy = (proc_cnt == proc_cnt_zero);
+
+
+   //
+   // Address Increment Logic
+   //
+   wire 											inc_addr_aq;
+   wire 											inc_addr_rsuv;
+
+   wire [PROC_CNT_BITS-1:0] 									cnt_inc_addr_aq_start	= 1;
+   wire [PROC_CNT_BITS-1:0] 									cnt_inc_addr_aq_stop		= OPERAND_NUM_WORDS;
+
+   wire [PROC_CNT_BITS-1:0] 									cnt_inc_addr_rsuv_start	= 2;
+   wire [PROC_CNT_BITS-1:0] 									cnt_inc_addr_rsuv_stop	= BUFFER_NUM_WORDS + 1;
+
+   assign inc_addr_aq   = (proc_cnt >= cnt_inc_addr_aq_start)   && (proc_cnt <= cnt_inc_addr_aq_stop);
+   assign inc_addr_rsuv = (proc_cnt >= cnt_inc_addr_rsuv_start) && (proc_cnt <= cnt_inc_addr_rsuv_stop);
+
+   always @(posedge clk) begin
+      //
+      if (inc_addr_aq)	addr_aq <= addr_aq_next;
+      else					addr_aq <= addr_aq_zero;
+      //
+      if (inc_addr_rsuv)	addr_rsuv <= addr_rsuv_next;
+      else						addr_rsuv <= addr_rsuv_zero;
+      //
+   end
+
+
+   //
+   // Write Enable Logic
+   //
+   wire	wren_rsuv;
+
+   wire [PROC_CNT_BITS-1:0] cnt_wren_rsuv_start	= 2;
+   wire [PROC_CNT_BITS-1:0] cnt_wren_rsuv_stop	= BUFFER_NUM_WORDS + 1;
+
+   assign wren_rsuv = (proc_cnt >= cnt_wren_rsuv_start) && (proc_cnt <= cnt_wren_rsuv_stop);
+
+   assign r_wren = wren_rsuv;
+   assign s_wren = wren_rsuv;
+   assign u_wren = wren_rsuv;
+   assign v_wren = wren_rsuv;
+
+
+   //
+   // Data Logic
+   //
+   assign r_dout = 32'd0;
+   assign s_dout = (proc_cnt == cnt_wren_rsuv_start) ? 32'd1 : 32'd0;
+   assign u_dout = (proc_cnt != cnt_wren_rsuv_stop)  ? q_din : 32'd0;
+   assign v_dout = (proc_cnt != cnt_wren_rsuv_stop)  ? a_din : 32'd0;
+
+
+   //
+   // Primary Counter Logic
+   //
+   always @(posedge clk or negedge rst_n)
+     //
+     if (rst_n == 1'b0) proc_cnt <= proc_cnt_zero;
+     else begin
+	if (!rdy)		proc_cnt <= proc_cnt_next;
+	else if (ena)	proc_cnt <= proc_cnt_next;
+     end
+
+
+endmodule
diff --git a/rtl/modular/modular_invertor/helper/modinv_helper_invert_compare.v b/rtl/modular/modular_invertor/helper/modinv_helper_invert_compare.v
index 6b65eb1..724b9f8 100644
--- a/rtl/modular/modular_invertor/helper/modinv_helper_invert_compare.v
+++ b/rtl/modular/modular_invertor/helper/modinv_helper_invert_compare.v
@@ -1,286 +1,286 @@
-`timescale 1ns / 1ps

-

-module modinv_helper_invert_compare

-	(

-		clk, rst_n,

-		ena, rdy,

-		

-		u_addr, u_din,

-		v_addr, v_din,

-		

-		u_gt_v, v_eq_1,
-		u_is_even, v_is_even

-	);

-	

-

-		//

-		// Parameters

-		//

-	parameter BUFFER_NUM_WORDS		= 9;

-	parameter BUFFER_ADDR_BITS		= 4;

-	

-	

-		//

-		// clog2

-		//

-`include "..\modinv_clog2.v"

-	

-	

-		//

-		// Constants

-		//

-	localparam PROC_NUM_CYCLES	= 1 * BUFFER_NUM_WORDS + 10;

-	localparam PROC_CNT_BITS	= clog2(PROC_NUM_CYCLES);

-	

-	

-		//

-		// Ports

-		//

-	input		wire									clk;

-	input		wire									rst_n;

-	input		wire									ena;

-	output	wire									rdy;

-

-	output	wire	[BUFFER_ADDR_BITS-1:0]	u_addr;

-	output	wire	[BUFFER_ADDR_BITS-1:0]	v_addr;

-		

-	input		wire	[              32-1:0]	u_din;

-	input		wire	[              32-1:0]	v_din;

-		

-	output	wire									u_gt_v;

-	output	wire									v_eq_1;

-	output	wire									u_is_even;

-	output	wire									v_is_even;

-

-

-		//

-		// Counter

-		//

-	reg	[PROC_CNT_BITS-1:0]	proc_cnt;

-

-	wire	[PROC_CNT_BITS-1:0]	proc_cnt_max	= PROC_NUM_CYCLES - 1;

-	wire	[PROC_CNT_BITS-1:0]	proc_cnt_zero	= {PROC_CNT_BITS{1'b0}};

-	wire	[PROC_CNT_BITS-1:0]	proc_cnt_next	= (proc_cnt < proc_cnt_max) ?

-																	proc_cnt + 1'b1 : proc_cnt_zero;

-	

-		//

-		// Addresses

-		//

-	reg	[BUFFER_ADDR_BITS-1:0]	addr_in;

-

-	wire	[BUFFER_ADDR_BITS-1:0]	addr_in_last	= BUFFER_NUM_WORDS - 1;

-	wire	[BUFFER_ADDR_BITS-1:0]	addr_in_zero	= {BUFFER_ADDR_BITS{1'b0}};

-	wire	[BUFFER_ADDR_BITS-1:0]	addr_in_prev	= (addr_in > addr_in_zero) ?

-																		addr_in - 1'b1 : addr_in_last;

-																			

-	assign u_addr					= addr_in;

-	assign v_addr					= addr_in;	

-	

-	

-		//

-		// Ready Flag

-		//

-	assign rdy = (proc_cnt == proc_cnt_zero);

-	

-	

-		//

-		// Address Decrement Logic

-		//

-	wire	dec_addr_in;

-

-	wire	[PROC_CNT_BITS-1:0]	cnt_dec_addr_in_start	= 0 * BUFFER_NUM_WORDS + 1;

-	wire	[PROC_CNT_BITS-1:0]	cnt_dec_addr_in_stop		= 1 * BUFFER_NUM_WORDS + 0;

-	

-	assign dec_addr_in   = (proc_cnt >= cnt_dec_addr_in_start)   && (proc_cnt <= cnt_dec_addr_in_stop);

-	

-	always @(posedge clk)

-		//

-		if (rdy)						addr_in <= addr_in_last;

-		else if (dec_addr_in)	addr_in <= addr_in_prev;

-	

-	

-		//

-		// Comparison Stage Flags

-		//

-	wire	calc_leg;

-	wire	calc_leg_final;

-	wire	calc_parity;

-

-	wire	[PROC_CNT_BITS-1:0]	cnt_calc_leg_start	= 0 * BUFFER_NUM_WORDS + 3;

-	wire	[PROC_CNT_BITS-1:0]	cnt_calc_leg_stop		= 1 * BUFFER_NUM_WORDS + 2;

-	wire	[PROC_CNT_BITS-1:0]	cnt_calc_parity		= 1 * BUFFER_NUM_WORDS + 1;

-	

-	assign calc_leg = (proc_cnt >= cnt_calc_leg_start) && (proc_cnt <= cnt_calc_leg_stop);

-	assign calc_leg_final = (proc_cnt == cnt_calc_leg_stop);

-	assign calc_parity = (proc_cnt == cnt_calc_parity);

-

-	

-		//

-		// Dummy Input

-		//

-	reg	sub32_din_1_lsb;

-	wire	[31: 0]	sub32_din_1 = {{31{1'b0}}, sub32_din_1_lsb};

-	

-	always @(posedge clk)

-		//

-		sub32_din_1_lsb <= (addr_in == addr_in_zero) ? 1'b1 : 1'b0;

-	

-	

-		//
-		// Subtractor (u - v)
-		//
-	wire	[31: 0]	sub32_u_minus_v_difference_out;
-	wire				sub32_u_minus_v_borrow_in;
-	wire				sub32_u_minus_v_borrow_out;
-	
-	subtractor32_wrapper sub32_u_minus_v
-	(
-		.clk		(clk),
-		.a			(u_din),
-		.b			(v_din),
-		.d			(sub32_u_minus_v_difference_out),
-		.b_in		(sub32_u_minus_v_borrow_in),
-		.b_out	(sub32_u_minus_v_borrow_out)
-	);

-	

-	

-		//
-		// Subtractor (v - 1)
-		//
-	wire	[31: 0]	sub32_v_minus_1_difference_out;
-	wire				sub32_v_minus_1_borrow_in;
-	wire				sub32_v_minus_1_borrow_out;
-	
-	subtractor32_wrapper sub32_v_minus_1
-	(
-		.clk		(clk),
-		.a			(v_din),
-		.b			(sub32_din_1),
-		.d			(sub32_v_minus_1_difference_out),
-		.b_in		(sub32_v_minus_1_borrow_in),
-		.b_out	(sub32_v_minus_1_borrow_out)
-	);

-	

-	

-	

-		//

-		// Borrow Masking Logic

-		//

-	reg	mask_borrow;

-	

-	always @(posedge clk)

-		//

-		mask_borrow <= ((proc_cnt > cnt_dec_addr_in_start) && (proc_cnt <= cnt_dec_addr_in_stop)) ?

-			1'b0 : 1'b1;

-		

-	assign sub32_u_minus_v_borrow_in = sub32_u_minus_v_borrow_out & ~mask_borrow;

-	assign sub32_v_minus_1_borrow_in = sub32_v_minus_1_borrow_out & ~mask_borrow;

-	

-		

-		//

-		// Comparison Logic

-		//

-	reg	cmp_u_v_l;

-	reg	cmp_u_v_e;

-	reg	cmp_u_v_g;

-

-	reg	cmp_v_1_l;

-	reg	cmp_v_1_e;

-	reg	cmp_v_1_g;

-

-	wire	cmp_unresolved_u_v = !(cmp_u_v_l || cmp_u_v_g);

-	wire	cmp_unresolved_v_1 = !(cmp_v_1_l || cmp_v_1_g);

-

-	wire	cmp_u_v_borrow_is_set			= (sub32_u_minus_v_borrow_out     ==  1'b1) ? 1'b1 : 1'b0;

-	wire	cmp_u_v_difference_is_nonzero	= (sub32_u_minus_v_difference_out != 32'd0) ? 1'b1 : 1'b0;

-

-	wire	cmp_v_1_borrow_is_set			= (sub32_v_minus_1_borrow_out     ==  1'b1) ? 1'b1 : 1'b0;

-	wire	cmp_v_1_difference_is_nonzero	= (sub32_v_minus_1_difference_out != 32'd0) ? 1'b1 : 1'b0;

-

-	reg	u_is_even_reg;

-	reg	v_is_even_reg;

-

-	always @(posedge clk)

-		//

-		if (rdy) begin

-			//

-			if (ena) begin

-				//

-				cmp_u_v_l		<= 1'b0;

-				cmp_u_v_e		<= 1'b0;

-				cmp_u_v_g		<= 1'b0;

-				//

-				cmp_v_1_l		<= 1'b0;

-				cmp_v_1_e		<= 1'b0;

-				cmp_v_1_g		<= 1'b0;

-				//

-				u_is_even_reg	<= 1'bX;

-				v_is_even_reg	<= 1'bX;

-				//

-			end

-			//

-		end else begin

-			//

-			// parity

-			//

-			if (calc_parity) begin

-				u_is_even_reg <= ~u_din[0];

-				v_is_even_reg <= ~v_din[0];

-			end

-			//

-			// u <> v

-			//

-			if (cmp_unresolved_u_v && calc_leg) begin

-				//

-				if (cmp_u_v_borrow_is_set)

-					cmp_u_v_l <= 1'b1;

-				//

-				if (!cmp_u_v_borrow_is_set && cmp_u_v_difference_is_nonzero)

-					cmp_u_v_g <= 1'b1;

-				//

-				if (!cmp_u_v_borrow_is_set && !cmp_u_v_difference_is_nonzero && calc_leg_final)

-					cmp_u_v_e <= 1'b1;

-				//

-			end

-			//

-			// v <> 1

-			//

-			if (cmp_unresolved_v_1 && calc_leg) begin

-				//

-				if (cmp_v_1_borrow_is_set)

-					cmp_v_1_l <= 1'b1;

-				//

-				if (!cmp_v_1_borrow_is_set && cmp_v_1_difference_is_nonzero)

-					cmp_v_1_g <= 1'b1;

-				//

-				if (!cmp_v_1_borrow_is_set && !cmp_v_1_difference_is_nonzero && calc_leg_final)

-					cmp_v_1_e <= 1'b1;

-				//

-			end			

-			//

-		end

-

-

-		//

-		// Output Flags

-		//

-	assign u_gt_v = !cmp_u_v_l && !cmp_u_v_e &&  cmp_u_v_g;

-	assign v_eq_1 = !cmp_v_1_l &&  cmp_v_1_e && !cmp_v_1_g;

-	

-	assign u_is_even = u_is_even_reg;

-	assign v_is_even = v_is_even_reg;

-

-

-		//

-		// Primary Counter Logic

-		//

-	always @(posedge clk or negedge rst_n)

-		//

-		if (rst_n == 1'b0) proc_cnt <= proc_cnt_zero;

-		else begin

-			if (!rdy)		proc_cnt <= proc_cnt_next;

-			else if (ena)	proc_cnt <= proc_cnt_next;

-		end

-

-

-endmodule

+`timescale 1ns / 1ps
+
+module modinv_helper_invert_compare
+  (
+   clk, rst_n,
+   ena, rdy,
+
+   u_addr, u_din,
+   v_addr, v_din,
+
+   u_gt_v, v_eq_1,
+   u_is_even, v_is_even
+   );
+
+
+   //
+   // Parameters
+   //
+   parameter BUFFER_NUM_WORDS		= 9;
+   parameter BUFFER_ADDR_BITS		= 4;
+
+
+   //
+   // clog2
+   //
+`include "../modinv_clog2.v"
+
+
+   //
+   // Constants
+   //
+   localparam PROC_NUM_CYCLES	= 1 * BUFFER_NUM_WORDS + 10;
+   localparam PROC_CNT_BITS	= clog2(PROC_NUM_CYCLES);
+
+
+   //
+   // Ports
+   //
+   input		wire									clk;
+   input		wire									rst_n;
+   input		wire									ena;
+   output	wire 										rdy;
+
+   output	wire [BUFFER_ADDR_BITS-1:0] 							u_addr;
+   output	wire [BUFFER_ADDR_BITS-1:0] 							v_addr;
+
+   input		wire [              32-1:0] 						u_din;
+   input		wire [              32-1:0] 						v_din;
+
+   output	wire 										u_gt_v;
+   output	wire 										v_eq_1;
+   output	wire 										u_is_even;
+   output	wire 										v_is_even;
+
+
+   //
+   // Counter
+   //
+   reg [PROC_CNT_BITS-1:0] 									proc_cnt;
+
+   wire [PROC_CNT_BITS-1:0] 									proc_cnt_max	= PROC_NUM_CYCLES - 1;
+   wire [PROC_CNT_BITS-1:0] 									proc_cnt_zero	= {PROC_CNT_BITS{1'b0}};
+   wire [PROC_CNT_BITS-1:0] 									proc_cnt_next	= (proc_cnt < proc_cnt_max) ?
+												proc_cnt + 1'b1 : proc_cnt_zero;
+
+   //
+   // Addresses
+   //
+   reg [BUFFER_ADDR_BITS-1:0] 									addr_in;
+
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_in_last	= BUFFER_NUM_WORDS - 1;
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_in_zero	= {BUFFER_ADDR_BITS{1'b0}};
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_in_prev	= (addr_in > addr_in_zero) ?
+												addr_in - 1'b1 : addr_in_last;
+
+   assign u_addr					= addr_in;
+   assign v_addr					= addr_in;
+
+
+   //
+   // Ready Flag
+   //
+   assign rdy = (proc_cnt == proc_cnt_zero);
+
+
+   //
+   // Address Decrement Logic
+   //
+   wire 											dec_addr_in;
+
+   wire [PROC_CNT_BITS-1:0] 									cnt_dec_addr_in_start	= 0 * BUFFER_NUM_WORDS + 1;
+   wire [PROC_CNT_BITS-1:0] 									cnt_dec_addr_in_stop		= 1 * BUFFER_NUM_WORDS + 0;
+
+   assign dec_addr_in   = (proc_cnt >= cnt_dec_addr_in_start)   && (proc_cnt <= cnt_dec_addr_in_stop);
+
+   always @(posedge clk)
+     //
+     if (rdy)						addr_in <= addr_in_last;
+     else if (dec_addr_in)	addr_in <= addr_in_prev;
+
+
+   //
+   // Comparison Stage Flags
+   //
+   wire 											calc_leg;
+   wire 											calc_leg_final;
+   wire 											calc_parity;
+
+   wire [PROC_CNT_BITS-1:0] 									cnt_calc_leg_start	= 0 * BUFFER_NUM_WORDS + 3;
+   wire [PROC_CNT_BITS-1:0] 									cnt_calc_leg_stop		= 1 * BUFFER_NUM_WORDS + 2;
+   wire [PROC_CNT_BITS-1:0] 									cnt_calc_parity		= 1 * BUFFER_NUM_WORDS + 1;
+
+   assign calc_leg = (proc_cnt >= cnt_calc_leg_start) && (proc_cnt <= cnt_calc_leg_stop);
+   assign calc_leg_final = (proc_cnt == cnt_calc_leg_stop);
+   assign calc_parity = (proc_cnt == cnt_calc_parity);
+
+
+   //
+   // Dummy Input
+   //
+   reg 												sub32_din_1_lsb;
+   wire [31: 0] 										sub32_din_1 = {{31{1'b0}}, sub32_din_1_lsb};
+
+   always @(posedge clk)
+     //
+     sub32_din_1_lsb <= (addr_in == addr_in_zero) ? 1'b1 : 1'b0;
+
+
+   //
+   // Subtractor (u - v)
+   //
+   wire [31: 0] 										sub32_u_minus_v_difference_out;
+   wire 											sub32_u_minus_v_borrow_in;
+   wire 											sub32_u_minus_v_borrow_out;
+
+   subtractor32_wrapper sub32_u_minus_v
+     (
+      .clk		(clk),
+      .a			(u_din),
+      .b			(v_din),
+      .d			(sub32_u_minus_v_difference_out),
+      .b_in		(sub32_u_minus_v_borrow_in),
+      .b_out	(sub32_u_minus_v_borrow_out)
+      );
+
+
+   //
+   // Subtractor (v - 1)
+   //
+   wire [31: 0] 										sub32_v_minus_1_difference_out;
+   wire 											sub32_v_minus_1_borrow_in;
+   wire 											sub32_v_minus_1_borrow_out;
+
+   subtractor32_wrapper sub32_v_minus_1
+     (
+      .clk		(clk),
+      .a			(v_din),
+      .b			(sub32_din_1),
+      .d			(sub32_v_minus_1_difference_out),
+      .b_in		(sub32_v_minus_1_borrow_in),
+      .b_out	(sub32_v_minus_1_borrow_out)
+      );
+
+
+
+   //
+   // Borrow Masking Logic
+   //
+   reg 												mask_borrow;
+
+   always @(posedge clk)
+     //
+     mask_borrow <= ((proc_cnt > cnt_dec_addr_in_start) && (proc_cnt <= cnt_dec_addr_in_stop)) ?
+		    1'b0 : 1'b1;
+
+   assign sub32_u_minus_v_borrow_in = sub32_u_minus_v_borrow_out & ~mask_borrow;
+   assign sub32_v_minus_1_borrow_in = sub32_v_minus_1_borrow_out & ~mask_borrow;
+
+
+   //
+   // Comparison Logic
+   //
+   reg 												cmp_u_v_l;
+   reg 												cmp_u_v_e;
+   reg 												cmp_u_v_g;
+
+   reg 												cmp_v_1_l;
+   reg 												cmp_v_1_e;
+   reg 												cmp_v_1_g;
+
+   wire 											cmp_unresolved_u_v = !(cmp_u_v_l || cmp_u_v_g);
+   wire 											cmp_unresolved_v_1 = !(cmp_v_1_l || cmp_v_1_g);
+
+   wire 											cmp_u_v_borrow_is_set			= (sub32_u_minus_v_borrow_out     ==  1'b1) ? 1'b1 : 1'b0;
+   wire 											cmp_u_v_difference_is_nonzero	= (sub32_u_minus_v_difference_out != 32'd0) ? 1'b1 : 1'b0;
+
+   wire 											cmp_v_1_borrow_is_set			= (sub32_v_minus_1_borrow_out     ==  1'b1) ? 1'b1 : 1'b0;
+   wire 											cmp_v_1_difference_is_nonzero	= (sub32_v_minus_1_difference_out != 32'd0) ? 1'b1 : 1'b0;
+
+   reg 												u_is_even_reg;
+   reg 												v_is_even_reg;
+
+   always @(posedge clk)
+     //
+     if (rdy) begin
+	//
+	if (ena) begin
+	   //
+	   cmp_u_v_l		<= 1'b0;
+	   cmp_u_v_e		<= 1'b0;
+	   cmp_u_v_g		<= 1'b0;
+	   //
+	   cmp_v_1_l		<= 1'b0;
+	   cmp_v_1_e		<= 1'b0;
+	   cmp_v_1_g		<= 1'b0;
+	   //
+	   u_is_even_reg	<= 1'bX;
+	   v_is_even_reg	<= 1'bX;
+	   //
+	end
+	//
+     end else begin
+	//
+	// parity
+	//
+	if (calc_parity) begin
+	   u_is_even_reg <= ~u_din[0];
+	   v_is_even_reg <= ~v_din[0];
+	end
+	//
+	// u <> v
+	//
+	if (cmp_unresolved_u_v && calc_leg) begin
+	   //
+	   if (cmp_u_v_borrow_is_set)
+	     cmp_u_v_l <= 1'b1;
+	   //
+	   if (!cmp_u_v_borrow_is_set && cmp_u_v_difference_is_nonzero)
+	     cmp_u_v_g <= 1'b1;
+	   //
+	   if (!cmp_u_v_borrow_is_set && !cmp_u_v_difference_is_nonzero && calc_leg_final)
+	     cmp_u_v_e <= 1'b1;
+	   //
+	end
+	//
+	// v <> 1
+	//
+	if (cmp_unresolved_v_1 && calc_leg) begin
+	   //
+	   if (cmp_v_1_borrow_is_set)
+	     cmp_v_1_l <= 1'b1;
+	   //
+	   if (!cmp_v_1_borrow_is_set && cmp_v_1_difference_is_nonzero)
+	     cmp_v_1_g <= 1'b1;
+	   //
+	   if (!cmp_v_1_borrow_is_set && !cmp_v_1_difference_is_nonzero && calc_leg_final)
+	     cmp_v_1_e <= 1'b1;
+	   //
+	end
+	//
+     end
+
+
+   //
+   // Output Flags
+   //
+   assign u_gt_v = !cmp_u_v_l && !cmp_u_v_e &&  cmp_u_v_g;
+   assign v_eq_1 = !cmp_v_1_l &&  cmp_v_1_e && !cmp_v_1_g;
+
+   assign u_is_even = u_is_even_reg;
+   assign v_is_even = v_is_even_reg;
+
+
+   //
+   // Primary Counter Logic
+   //
+   always @(posedge clk or negedge rst_n)
+     //
+     if (rst_n == 1'b0) proc_cnt <= proc_cnt_zero;
+     else begin
+	if (!rdy)		proc_cnt <= proc_cnt_next;
+	else if (ena)	proc_cnt <= proc_cnt_next;
+     end
+
+
+endmodule
diff --git a/rtl/modular/modular_invertor/helper/modinv_helper_invert_precalc.v b/rtl/modular/modular_invertor/helper/modinv_helper_invert_precalc.v
index ab15563..3ebea00 100644
--- a/rtl/modular/modular_invertor/helper/modinv_helper_invert_precalc.v
+++ b/rtl/modular/modular_invertor/helper/modinv_helper_invert_precalc.v
@@ -1,408 +1,408 @@
-`timescale 1ns / 1ps

-

-module modinv_helper_invert_precalc

-	(

-		clk, rst_n,

-		ena, rdy,

-		

-		r_addr, r_din,

-		s_addr, s_din,

-		u_addr, u_din,

-		v_addr, v_din,

-		

-		r_dbl_addr,          r_dbl_wren,          r_dbl_dout,

-		s_dbl_addr,          s_dbl_wren,          s_dbl_dout,

-		r_plus_s_addr,       r_plus_s_wren,       r_plus_s_dout,

-		u_half_addr,         u_half_wren,         u_half_dout,

-		v_half_addr,         v_half_wren,         v_half_dout,

-		u_minus_v_addr,      u_minus_v_wren,      u_minus_v_dout,      u_minus_v_din,

-		v_minus_u_addr,      v_minus_u_wren,      v_minus_u_dout,      v_minus_u_din,

-		u_minus_v_half_addr, u_minus_v_half_wren, u_minus_v_half_dout,

-		v_minus_u_half_addr, v_minus_u_half_wren, v_minus_u_half_dout

-	);

-	

-

-		//

-		// Parameters

-		//

-	parameter BUFFER_NUM_WORDS		= 9;

-	parameter BUFFER_ADDR_BITS		= 4;

-	

-	

-		//

-		// clog2

-		//

-`include "..\modinv_clog2.v"

-	

-	

-		//

-		// Constants

-		//

-	localparam PROC_NUM_CYCLES	= 2 * BUFFER_NUM_WORDS + 4;

-	localparam PROC_CNT_BITS	= clog2(PROC_NUM_CYCLES);

-	

-	

-		//

-		// Ports

-		//

-	input		wire									clk;

-	input		wire									rst_n;

-	input		wire									ena;

-	output	wire									rdy;

-

-	output	wire	[BUFFER_ADDR_BITS-1:0]	r_addr;

-	output	wire	[BUFFER_ADDR_BITS-1:0]	s_addr;

-	output	wire	[BUFFER_ADDR_BITS-1:0]	u_addr;

-	output	wire	[BUFFER_ADDR_BITS-1:0]	v_addr;

-		

-	input		wire	[              32-1:0]	r_din;

-	input		wire	[              32-1:0]	s_din;

-	input		wire	[              32-1:0]	u_din;

-	input		wire	[              32-1:0]	v_din;

-		

-	output	wire	[BUFFER_ADDR_BITS-1:0]	r_dbl_addr;

-	output	wire	[BUFFER_ADDR_BITS-1:0]	s_dbl_addr;

-	output	wire	[BUFFER_ADDR_BITS-1:0]	r_plus_s_addr;

-	output	wire	[BUFFER_ADDR_BITS-1:0]	u_half_addr;

-	output	wire	[BUFFER_ADDR_BITS-1:0]	v_half_addr;

-	output	wire	[BUFFER_ADDR_BITS-1:0]	u_minus_v_addr;

-	output	wire	[BUFFER_ADDR_BITS-1:0]	v_minus_u_addr;

-	output	wire	[BUFFER_ADDR_BITS-1:0]	u_minus_v_half_addr;

-	output	wire	[BUFFER_ADDR_BITS-1:0]	v_minus_u_half_addr;

-		

-	output	wire	[              32-1:0]	r_dbl_dout;

-	output	wire	[              32-1:0]	s_dbl_dout;

-	output	wire	[              32-1:0]	r_plus_s_dout;

-	output	wire	[              32-1:0]	u_half_dout;

-	output	wire	[              32-1:0]	v_half_dout;

-	output	wire	[              32-1:0]	u_minus_v_dout;

-	output	wire	[              32-1:0]	v_minus_u_dout;

-	output	wire	[              32-1:0]	u_minus_v_half_dout;

-	output	wire	[              32-1:0]	v_minus_u_half_dout;

-		

-	output	wire									r_dbl_wren;

-	output	wire									s_dbl_wren;

-	output	wire									r_plus_s_wren;

-	output	wire									u_half_wren;

-	output	wire									v_half_wren;

-	output	wire									u_minus_v_wren;

-	output	wire									v_minus_u_wren;

-	output	wire									u_minus_v_half_wren;

-	output	wire									v_minus_u_half_wren;

-	

-	input		wire	[              32-1:0]	u_minus_v_din;

-	input		wire	[              32-1:0]	v_minus_u_din;

-	

-

-

-		//

-		// Counter

-		//

-	reg	[PROC_CNT_BITS-1:0]	proc_cnt;

-

-	wire	[PROC_CNT_BITS-1:0]	proc_cnt_max	= PROC_NUM_CYCLES - 1;

-	wire	[PROC_CNT_BITS-1:0]	proc_cnt_zero	= {PROC_CNT_BITS{1'b0}};

-	wire	[PROC_CNT_BITS-1:0]	proc_cnt_next	= (proc_cnt < proc_cnt_max) ?

-																	proc_cnt + 1'b1 : proc_cnt_zero;

-	

-		//

-		// Addresses

-		//

-	reg	[BUFFER_ADDR_BITS-1:0]	addr_in;

-

-	wire	[BUFFER_ADDR_BITS-1:0]	addr_in_last	= BUFFER_NUM_WORDS - 1;

-	wire	[BUFFER_ADDR_BITS-1:0]	addr_in_zero	= {BUFFER_ADDR_BITS{1'b0}};

-	wire	[BUFFER_ADDR_BITS-1:0]	addr_in_next	= (addr_in < addr_in_last) ?

-																		addr_in + 1'b1 : addr_in_zero;

-	wire	[BUFFER_ADDR_BITS-1:0]	addr_in_prev	= (addr_in > addr_in_zero) ?

-																		addr_in - 1'b1 : addr_in_zero;

-																		

-	reg	[BUFFER_ADDR_BITS-1:0]	addr_out1;

-	

-	wire	[BUFFER_ADDR_BITS-1:0]	addr_out1_last	= BUFFER_NUM_WORDS - 1;

-	wire	[BUFFER_ADDR_BITS-1:0]	addr_out1_zero	= {BUFFER_ADDR_BITS{1'b0}};

-	wire	[BUFFER_ADDR_BITS-1:0]	addr_out1_next	= (addr_out1 < addr_out1_last) ?

-																		addr_out1 + 1'b1 : addr_out1_zero;

-																		

-	reg	[BUFFER_ADDR_BITS-1:0]	addr_out2;

-	

-	wire	[BUFFER_ADDR_BITS-1:0]	addr_out2_last	= BUFFER_NUM_WORDS - 1;

-	wire	[BUFFER_ADDR_BITS-1:0]	addr_out2_zero	= {BUFFER_ADDR_BITS{1'b0}};

-	wire	[BUFFER_ADDR_BITS-1:0]	addr_out2_next	= (addr_out2 < addr_out2_last) ?

-																		addr_out2 + 1'b1 : addr_out2_zero;

-	wire	[BUFFER_ADDR_BITS-1:0]	addr_out2_prev	= (addr_out2 > addr_out2_zero) ?

-																		addr_out2 - 1'b1 : addr_out2_zero;

-																		

-	reg	[BUFFER_ADDR_BITS-1:0]	addr_out3;

-	

-	wire	[BUFFER_ADDR_BITS-1:0]	addr_out3_last	= BUFFER_NUM_WORDS - 1;

-	wire	[BUFFER_ADDR_BITS-1:0]	addr_out3_zero	= {BUFFER_ADDR_BITS{1'b0}};

-	wire	[BUFFER_ADDR_BITS-1:0]	addr_out3_prev	= (addr_out3 > addr_out3_zero) ?

-																		addr_out3 - 1'b1 : addr_out3_last;

-

-	reg	[BUFFER_ADDR_BITS-1:0]	addr_out4;

-	

-	wire	[BUFFER_ADDR_BITS-1:0]	addr_out4_last	= BUFFER_NUM_WORDS - 1;

-	wire	[BUFFER_ADDR_BITS-1:0]	addr_out4_zero	= {BUFFER_ADDR_BITS{1'b0}};

-	wire	[BUFFER_ADDR_BITS-1:0]	addr_out4_prev	= (addr_out4 > addr_out4_zero) ?

-																		addr_out4 - 1'b1 : addr_out4_last;

-

-	

-	assign r_addr					= addr_in;

-	assign s_addr					= addr_in;

-	assign u_addr					= addr_in;

-	assign v_addr					= addr_in;

-		

-	assign r_dbl_addr				= addr_out1;

-	assign s_dbl_addr				= addr_out1;

-	assign r_plus_s_addr			= addr_out2;

-	assign u_half_addr			= addr_out3;

-	assign v_half_addr			= addr_out3;

-	assign u_minus_v_addr		= addr_out2;

-	assign v_minus_u_addr		= addr_out2;

-	assign u_minus_v_half_addr	= addr_out4;

-	assign v_minus_u_half_addr	= addr_out4;

-	

-		

-		//

-		// Ready Flag

-		//

-	assign rdy = (proc_cnt == proc_cnt_zero);

-	

-	

-		//

-		// Address Increment/Decrement Logic

-		//

-	wire	inc_addr_in;

-	wire	dec_addr_in;

-	wire	inc_addr_out1;

-	wire	inc_addr_out2;

-	wire	dec_addr_out2;

-	wire	dec_addr_out3;

-	wire	dec_addr_out4;

-

-	wire	[PROC_CNT_BITS-1:0]	cnt_inc_addr_in_start	= 0 * BUFFER_NUM_WORDS + 1;

-	wire	[PROC_CNT_BITS-1:0]	cnt_inc_addr_in_stop		= 1 * BUFFER_NUM_WORDS - 1;

-	

-	wire	[PROC_CNT_BITS-1:0]	cnt_inc_addr_out1_start	= 0 * BUFFER_NUM_WORDS + 2;

-	wire	[PROC_CNT_BITS-1:0]	cnt_inc_addr_out1_stop	= 1 * BUFFER_NUM_WORDS + 1;

-	

-	wire	[PROC_CNT_BITS-1:0]	cnt_inc_addr_out2_start	= 0 * BUFFER_NUM_WORDS + 3;

-	wire	[PROC_CNT_BITS-1:0]	cnt_inc_addr_out2_stop	= 1 * BUFFER_NUM_WORDS + 1;

-	

-	wire	[PROC_CNT_BITS-1:0]	cnt_dec_addr_out2_start	= 1 * BUFFER_NUM_WORDS + 3;

-	wire	[PROC_CNT_BITS-1:0]	cnt_dec_addr_out2_stop	= 2 * BUFFER_NUM_WORDS + 1;	

-

-	wire	[PROC_CNT_BITS-1:0]	cnt_dec_addr_in_start	= 1 * BUFFER_NUM_WORDS + 0;

-	wire	[PROC_CNT_BITS-1:0]	cnt_dec_addr_in_stop		= 2 * BUFFER_NUM_WORDS - 2;	

-	

-	wire	[PROC_CNT_BITS-1:0]	cnt_dec_addr_out3_start	= 1 * BUFFER_NUM_WORDS + 1;

-	wire	[PROC_CNT_BITS-1:0]	cnt_dec_addr_out3_stop	= 2 * BUFFER_NUM_WORDS + 0;

-	

-	wire	[PROC_CNT_BITS-1:0]	cnt_dec_addr_out4_start	= 1 * BUFFER_NUM_WORDS + 4;

-	wire	[PROC_CNT_BITS-1:0]	cnt_dec_addr_out4_stop	= 2 * BUFFER_NUM_WORDS + 3;	

-

-	assign inc_addr_in   = (proc_cnt >= cnt_inc_addr_in_start)   && (proc_cnt <= cnt_inc_addr_in_stop);

-	assign dec_addr_in   = (proc_cnt >= cnt_dec_addr_in_start)   && (proc_cnt <= cnt_dec_addr_in_stop);

-	assign inc_addr_out1 = (proc_cnt >= cnt_inc_addr_out1_start) && (proc_cnt <= cnt_inc_addr_out1_stop);

-	assign inc_addr_out2 = (proc_cnt >= cnt_inc_addr_out2_start) && (proc_cnt <= cnt_inc_addr_out2_stop);

-	assign dec_addr_out2 = (proc_cnt >= cnt_dec_addr_out2_start) && (proc_cnt <= cnt_dec_addr_out2_stop);

-	assign dec_addr_out3 = (proc_cnt >= cnt_dec_addr_out3_start) && (proc_cnt <= cnt_dec_addr_out3_stop);

-	assign dec_addr_out4 = (proc_cnt >= cnt_dec_addr_out4_start) && (proc_cnt <= cnt_dec_addr_out4_stop);

-	

-	

-	always @(posedge clk) begin

-		//

-		if (rdy) begin

-			//

-			addr_in 		<= addr_in_zero;

-			addr_out1	<= addr_out1_zero;

-			addr_out2	<= addr_out2_zero;

-			addr_out3	<= addr_out3_last;

-			addr_out4	<= addr_out4_last;

-			//

-		end else begin

-			//

-			if (inc_addr_in)				addr_in <= addr_in_next;

-			else if (dec_addr_in)		addr_in <= addr_in_prev;

-			//

-			if (inc_addr_out1)			addr_out1 <= addr_out1_next;

-			else								addr_out1 <= addr_out1_zero;

-			//

-			if (inc_addr_out2)			addr_out2 <= addr_out2_next;

-			else if (dec_addr_out2)		addr_out2 <= addr_out2_prev;

-			//

-			if (dec_addr_out3)			addr_out3 <= addr_out3_prev;

-			else								addr_out3 <= addr_out3_last;

-			//

-			if (dec_addr_out4)			addr_out4 <= addr_out4_prev;

-			else								addr_out4 <= addr_out4_last;

-			//

-		end

-		//

-	end

-	

-	

-		//

-		// Write Enable Logic

-		//

-	wire	wren_out1;

-	wire	wren_out2;

-	wire	wren_out3;

-	wire	wren_out4;

-

-	wire	[PROC_CNT_BITS-1:0]	cnt_wren_out1_start	= 0 * BUFFER_NUM_WORDS + 2;

-	wire	[PROC_CNT_BITS-1:0]	cnt_wren_out1_stop	= 1 * BUFFER_NUM_WORDS + 1;

-	

-	wire	[PROC_CNT_BITS-1:0]	cnt_wren_out2_start	= 0 * BUFFER_NUM_WORDS + 3;

-	wire	[PROC_CNT_BITS-1:0]	cnt_wren_out2_stop	= 1 * BUFFER_NUM_WORDS + 2;

-	

-	wire	[PROC_CNT_BITS-1:0]	cnt_wren_out3_start	= 1 * BUFFER_NUM_WORDS + 1;

-	wire	[PROC_CNT_BITS-1:0]	cnt_wren_out3_stop	= 2 * BUFFER_NUM_WORDS + 0;

-	

-	wire	[PROC_CNT_BITS-1:0]	cnt_wren_out4_start	= 1 * BUFFER_NUM_WORDS + 4;

-	wire	[PROC_CNT_BITS-1:0]	cnt_wren_out4_stop	= 2 * BUFFER_NUM_WORDS + 3;

-

-	assign wren_out1 = (proc_cnt >= cnt_wren_out1_start) && (proc_cnt <= cnt_wren_out1_stop);

-	assign wren_out2 = (proc_cnt >= cnt_wren_out2_start) && (proc_cnt <= cnt_wren_out2_stop);

-	assign wren_out3 = (proc_cnt >= cnt_wren_out3_start) && (proc_cnt <= cnt_wren_out3_stop);

-	assign wren_out4 = (proc_cnt >= cnt_wren_out4_start) && (proc_cnt <= cnt_wren_out4_stop);

-

-	assign r_dbl_wren				= wren_out1;

-	assign s_dbl_wren				= wren_out1;

-	assign r_plus_s_wren			= wren_out2;

-	assign u_half_wren			= wren_out3;

-	assign v_half_wren			= wren_out3;

-	assign u_minus_v_wren		= wren_out2;

-	assign v_minus_u_wren		= wren_out2;

-	assign u_minus_v_half_wren	= wren_out4;

-	assign v_minus_u_half_wren	= wren_out4;

-

-

-		//
-		// Adder (r + s)
-		//
-	wire	[31: 0]	add32_r_plus_s_sum_out;
-	wire				add32_r_plus_s_carry_in;
-	wire				add32_r_plus_s_carry_out;
-	
-	adder32_wrapper add32_r_plus_s
-	(
-		.clk		(clk),
-		.a			(r_din),
-		.b			(s_din),
-		.s			(add32_r_plus_s_sum_out),
-		.c_in		(add32_r_plus_s_carry_in),
-		.c_out	(add32_r_plus_s_carry_out)
-	);

-	

-		//
-		// Subtractor (u - v)
-		//
-	wire	[31: 0]	sub32_u_minus_v_difference_out;
-	wire				sub32_u_minus_v_borrow_in;
-	wire				sub32_u_minus_v_borrow_out;
-	
-	subtractor32_wrapper sub32_u_minus_v
-	(
-		.clk		(clk),
-		.a			(u_din),
-		.b			(v_din),
-		.d			(sub32_u_minus_v_difference_out),
-		.b_in		(sub32_u_minus_v_borrow_in),
-		.b_out	(sub32_u_minus_v_borrow_out)
-	);

-	

-		//
-		// Subtractor (v - u)
-		//
-	wire	[31: 0]	sub32_v_minus_u_difference_out;
-	wire				sub32_v_minus_u_borrow_in;
-	wire				sub32_v_minus_u_borrow_out;
-	
-	subtractor32_wrapper sub32_v_minus_u
-	(
-		.clk		(clk),
-		.a			(v_din),
-		.b			(u_din),
-		.d			(sub32_v_minus_u_difference_out),
-		.b_in		(sub32_v_minus_u_borrow_in),
-		.b_out	(sub32_v_minus_u_borrow_out)
-	);

-	

-	

-		//

-		// Carry & Borrow Masking Logic

-		//

-	reg	mask_carry_borrow;

-	

-	always @(posedge clk)

-		//

-		mask_carry_borrow <= ((proc_cnt >= cnt_wren_out1_start) && (proc_cnt < cnt_wren_out1_stop)) ?

-			1'b0 : 1'b1;

-		

-	assign add32_r_plus_s_carry_in   = add32_r_plus_s_carry_out   & ~mask_carry_borrow;

-	assign sub32_u_minus_v_borrow_in = sub32_u_minus_v_borrow_out & ~mask_carry_borrow;

-	assign sub32_v_minus_u_borrow_in = sub32_v_minus_u_borrow_out & ~mask_carry_borrow;

-	

-	

-		//

-		// Carry Bits

-		//

-	reg	r_dbl_carry;

-	reg	s_dbl_carry;

-	reg	u_half_carry;

-	reg	v_half_carry;

-	reg	u_minus_v_half_carry;

-	reg	v_minus_u_half_carry;

-	

-	always @(posedge clk) begin

-		

-		r_dbl_carry					<= ((proc_cnt >= cnt_wren_out1_start) && (proc_cnt < cnt_wren_out1_stop)) ?

-											r_din[31] : 1'b0;

-								

-		s_dbl_carry					<= ((proc_cnt >= cnt_wren_out1_start) && (proc_cnt < cnt_wren_out1_stop)) ?

-											s_din[31] : 1'b0;

-								

-		u_half_carry				<= ((proc_cnt >= cnt_wren_out3_start) && (proc_cnt < cnt_wren_out3_stop)) ?

-											u_din[0] : 1'b0;

-		

-		v_half_carry				<= ((proc_cnt >= cnt_wren_out3_start) && (proc_cnt < cnt_wren_out3_stop)) ?

-											v_din[0] : 1'b0;

-									

-		u_minus_v_half_carry		<= ((proc_cnt >= cnt_wren_out4_start) && (proc_cnt < cnt_wren_out4_stop)) ?

-											u_minus_v_din[0] : 1'b0;

-		

-		v_minus_u_half_carry		<= ((proc_cnt >= cnt_wren_out4_start) && (proc_cnt < cnt_wren_out4_stop)) ?

-											v_minus_u_din[0] : 1'b0;

-

-	end

-	

-	

-		//

-		// Data Mapper

-		//

-	assign r_dbl_dout				= {r_din[30:0], r_dbl_carry};

-	assign s_dbl_dout				= {s_din[30:0], s_dbl_carry};

-	assign r_plus_s_dout			= add32_r_plus_s_sum_out;

-	assign u_half_dout			= {u_half_carry, u_din[31:1]};

-	assign v_half_dout			= {v_half_carry, v_din[31:1]};

-	assign u_minus_v_dout		= sub32_u_minus_v_difference_out;

-	assign v_minus_u_dout		= sub32_v_minus_u_difference_out;

-	assign u_minus_v_half_dout	= {u_minus_v_half_carry, u_minus_v_din[31:1]};

-	assign v_minus_u_half_dout	= {v_minus_u_half_carry, v_minus_u_din[31:1]};

-	

-	

-		//

-		// Primary Counter Logic

-		//

-	always @(posedge clk or negedge rst_n)

-		//

-		if (rst_n == 1'b0) proc_cnt <= proc_cnt_zero;

-		else begin

-			if (!rdy)		proc_cnt <= proc_cnt_next;

-			else if (ena)	proc_cnt <= proc_cnt_next;

-		end

-

-

-endmodule

+`timescale 1ns / 1ps
+
+module modinv_helper_invert_precalc
+  (
+   clk, rst_n,
+   ena, rdy,
+
+   r_addr, r_din,
+   s_addr, s_din,
+   u_addr, u_din,
+   v_addr, v_din,
+
+   r_dbl_addr,          r_dbl_wren,          r_dbl_dout,
+   s_dbl_addr,          s_dbl_wren,          s_dbl_dout,
+   r_plus_s_addr,       r_plus_s_wren,       r_plus_s_dout,
+   u_half_addr,         u_half_wren,         u_half_dout,
+   v_half_addr,         v_half_wren,         v_half_dout,
+   u_minus_v_addr,      u_minus_v_wren,      u_minus_v_dout,      u_minus_v_din,
+   v_minus_u_addr,      v_minus_u_wren,      v_minus_u_dout,      v_minus_u_din,
+   u_minus_v_half_addr, u_minus_v_half_wren, u_minus_v_half_dout,
+   v_minus_u_half_addr, v_minus_u_half_wren, v_minus_u_half_dout
+   );
+
+
+   //
+   // Parameters
+   //
+   parameter BUFFER_NUM_WORDS		= 9;
+   parameter BUFFER_ADDR_BITS		= 4;
+
+
+   //
+   // clog2
+   //
+`include "../modinv_clog2.v"
+
+
+   //
+   // Constants
+   //
+   localparam PROC_NUM_CYCLES	= 2 * BUFFER_NUM_WORDS + 4;
+   localparam PROC_CNT_BITS	= clog2(PROC_NUM_CYCLES);
+
+
+   //
+   // Ports
+   //
+   input		wire									clk;
+   input		wire									rst_n;
+   input		wire									ena;
+   output	wire 										rdy;
+
+   output	wire [BUFFER_ADDR_BITS-1:0] 							r_addr;
+   output	wire [BUFFER_ADDR_BITS-1:0] 							s_addr;
+   output	wire [BUFFER_ADDR_BITS-1:0] 							u_addr;
+   output	wire [BUFFER_ADDR_BITS-1:0] 							v_addr;
+
+   input		wire [              32-1:0] 						r_din;
+   input		wire [              32-1:0] 						s_din;
+   input		wire [              32-1:0] 						u_din;
+   input		wire [              32-1:0] 						v_din;
+
+   output	wire [BUFFER_ADDR_BITS-1:0] 							r_dbl_addr;
+   output	wire [BUFFER_ADDR_BITS-1:0] 							s_dbl_addr;
+   output	wire [BUFFER_ADDR_BITS-1:0] 							r_plus_s_addr;
+   output	wire [BUFFER_ADDR_BITS-1:0] 							u_half_addr;
+   output	wire [BUFFER_ADDR_BITS-1:0] 							v_half_addr;
+   output	wire [BUFFER_ADDR_BITS-1:0] 							u_minus_v_addr;
+   output	wire [BUFFER_ADDR_BITS-1:0] 							v_minus_u_addr;
+   output	wire [BUFFER_ADDR_BITS-1:0] 							u_minus_v_half_addr;
+   output	wire [BUFFER_ADDR_BITS-1:0] 							v_minus_u_half_addr;
+
+   output	wire [              32-1:0] 							r_dbl_dout;
+   output	wire [              32-1:0] 							s_dbl_dout;
+   output	wire [              32-1:0] 							r_plus_s_dout;
+   output	wire [              32-1:0] 							u_half_dout;
+   output	wire [              32-1:0] 							v_half_dout;
+   output	wire [              32-1:0] 							u_minus_v_dout;
+   output	wire [              32-1:0] 							v_minus_u_dout;
+   output	wire [              32-1:0] 							u_minus_v_half_dout;
+   output	wire [              32-1:0] 							v_minus_u_half_dout;
+
+   output	wire 										r_dbl_wren;
+   output	wire 										s_dbl_wren;
+   output	wire 										r_plus_s_wren;
+   output	wire 										u_half_wren;
+   output	wire 										v_half_wren;
+   output	wire 										u_minus_v_wren;
+   output	wire 										v_minus_u_wren;
+   output	wire 										u_minus_v_half_wren;
+   output	wire 										v_minus_u_half_wren;
+
+   input		wire [              32-1:0] 						u_minus_v_din;
+   input		wire [              32-1:0] 						v_minus_u_din;
+
+
+
+   //
+   // Counter
+   //
+   reg [PROC_CNT_BITS-1:0] 									proc_cnt;
+
+   wire [PROC_CNT_BITS-1:0] 									proc_cnt_max	= PROC_NUM_CYCLES - 1;
+   wire [PROC_CNT_BITS-1:0] 									proc_cnt_zero	= {PROC_CNT_BITS{1'b0}};
+   wire [PROC_CNT_BITS-1:0] 									proc_cnt_next	= (proc_cnt < proc_cnt_max) ?
+												proc_cnt + 1'b1 : proc_cnt_zero;
+
+   //
+   // Addresses
+   //
+   reg [BUFFER_ADDR_BITS-1:0] 									addr_in;
+
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_in_last	= BUFFER_NUM_WORDS - 1;
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_in_zero	= {BUFFER_ADDR_BITS{1'b0}};
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_in_next	= (addr_in < addr_in_last) ?
+												addr_in + 1'b1 : addr_in_zero;
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_in_prev	= (addr_in > addr_in_zero) ?
+												addr_in - 1'b1 : addr_in_zero;
+
+   reg [BUFFER_ADDR_BITS-1:0] 									addr_out1;
+
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_out1_last	= BUFFER_NUM_WORDS - 1;
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_out1_zero	= {BUFFER_ADDR_BITS{1'b0}};
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_out1_next	= (addr_out1 < addr_out1_last) ?
+												addr_out1 + 1'b1 : addr_out1_zero;
+
+   reg [BUFFER_ADDR_BITS-1:0] 									addr_out2;
+
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_out2_last	= BUFFER_NUM_WORDS - 1;
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_out2_zero	= {BUFFER_ADDR_BITS{1'b0}};
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_out2_next	= (addr_out2 < addr_out2_last) ?
+												addr_out2 + 1'b1 : addr_out2_zero;
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_out2_prev	= (addr_out2 > addr_out2_zero) ?
+												addr_out2 - 1'b1 : addr_out2_zero;
+
+   reg [BUFFER_ADDR_BITS-1:0] 									addr_out3;
+
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_out3_last	= BUFFER_NUM_WORDS - 1;
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_out3_zero	= {BUFFER_ADDR_BITS{1'b0}};
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_out3_prev	= (addr_out3 > addr_out3_zero) ?
+												addr_out3 - 1'b1 : addr_out3_last;
+
+   reg [BUFFER_ADDR_BITS-1:0] 									addr_out4;
+
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_out4_last	= BUFFER_NUM_WORDS - 1;
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_out4_zero	= {BUFFER_ADDR_BITS{1'b0}};
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_out4_prev	= (addr_out4 > addr_out4_zero) ?
+												addr_out4 - 1'b1 : addr_out4_last;
+
+
+   assign r_addr					= addr_in;
+   assign s_addr					= addr_in;
+   assign u_addr					= addr_in;
+   assign v_addr					= addr_in;
+
+   assign r_dbl_addr				= addr_out1;
+   assign s_dbl_addr				= addr_out1;
+   assign r_plus_s_addr			= addr_out2;
+   assign u_half_addr			= addr_out3;
+   assign v_half_addr			= addr_out3;
+   assign u_minus_v_addr		= addr_out2;
+   assign v_minus_u_addr		= addr_out2;
+   assign u_minus_v_half_addr	= addr_out4;
+   assign v_minus_u_half_addr	= addr_out4;
+
+
+   //
+   // Ready Flag
+   //
+   assign rdy = (proc_cnt == proc_cnt_zero);
+
+
+   //
+   // Address Increment/Decrement Logic
+   //
+   wire 											inc_addr_in;
+   wire 											dec_addr_in;
+   wire 											inc_addr_out1;
+   wire 											inc_addr_out2;
+   wire 											dec_addr_out2;
+   wire 											dec_addr_out3;
+   wire 											dec_addr_out4;
+
+   wire [PROC_CNT_BITS-1:0] 									cnt_inc_addr_in_start	= 0 * BUFFER_NUM_WORDS + 1;
+   wire [PROC_CNT_BITS-1:0] 									cnt_inc_addr_in_stop		= 1 * BUFFER_NUM_WORDS - 1;
+
+   wire [PROC_CNT_BITS-1:0] 									cnt_inc_addr_out1_start	= 0 * BUFFER_NUM_WORDS + 2;
+   wire [PROC_CNT_BITS-1:0] 									cnt_inc_addr_out1_stop	= 1 * BUFFER_NUM_WORDS + 1;
+
+   wire [PROC_CNT_BITS-1:0] 									cnt_inc_addr_out2_start	= 0 * BUFFER_NUM_WORDS + 3;
+   wire [PROC_CNT_BITS-1:0] 									cnt_inc_addr_out2_stop	= 1 * BUFFER_NUM_WORDS + 1;
+
+   wire [PROC_CNT_BITS-1:0] 									cnt_dec_addr_out2_start	= 1 * BUFFER_NUM_WORDS + 3;
+   wire [PROC_CNT_BITS-1:0] 									cnt_dec_addr_out2_stop	= 2 * BUFFER_NUM_WORDS + 1;
+
+   wire [PROC_CNT_BITS-1:0] 									cnt_dec_addr_in_start	= 1 * BUFFER_NUM_WORDS + 0;
+   wire [PROC_CNT_BITS-1:0] 									cnt_dec_addr_in_stop		= 2 * BUFFER_NUM_WORDS - 2;
+
+   wire [PROC_CNT_BITS-1:0] 									cnt_dec_addr_out3_start	= 1 * BUFFER_NUM_WORDS + 1;
+   wire [PROC_CNT_BITS-1:0] 									cnt_dec_addr_out3_stop	= 2 * BUFFER_NUM_WORDS + 0;
+
+   wire [PROC_CNT_BITS-1:0] 									cnt_dec_addr_out4_start	= 1 * BUFFER_NUM_WORDS + 4;
+   wire [PROC_CNT_BITS-1:0] 									cnt_dec_addr_out4_stop	= 2 * BUFFER_NUM_WORDS + 3;
+
+   assign inc_addr_in   = (proc_cnt >= cnt_inc_addr_in_start)   && (proc_cnt <= cnt_inc_addr_in_stop);
+   assign dec_addr_in   = (proc_cnt >= cnt_dec_addr_in_start)   && (proc_cnt <= cnt_dec_addr_in_stop);
+   assign inc_addr_out1 = (proc_cnt >= cnt_inc_addr_out1_start) && (proc_cnt <= cnt_inc_addr_out1_stop);
+   assign inc_addr_out2 = (proc_cnt >= cnt_inc_addr_out2_start) && (proc_cnt <= cnt_inc_addr_out2_stop);
+   assign dec_addr_out2 = (proc_cnt >= cnt_dec_addr_out2_start) && (proc_cnt <= cnt_dec_addr_out2_stop);
+   assign dec_addr_out3 = (proc_cnt >= cnt_dec_addr_out3_start) && (proc_cnt <= cnt_dec_addr_out3_stop);
+   assign dec_addr_out4 = (proc_cnt >= cnt_dec_addr_out4_start) && (proc_cnt <= cnt_dec_addr_out4_stop);
+
+
+   always @(posedge clk) begin
+      //
+      if (rdy) begin
+	 //
+	 addr_in 		<= addr_in_zero;
+	 addr_out1	<= addr_out1_zero;
+	 addr_out2	<= addr_out2_zero;
+	 addr_out3	<= addr_out3_last;
+	 addr_out4	<= addr_out4_last;
+	 //
+      end else begin
+	 //
+	 if (inc_addr_in)				addr_in <= addr_in_next;
+	 else if (dec_addr_in)		addr_in <= addr_in_prev;
+	 //
+	 if (inc_addr_out1)			addr_out1 <= addr_out1_next;
+	 else								addr_out1 <= addr_out1_zero;
+	 //
+	 if (inc_addr_out2)			addr_out2 <= addr_out2_next;
+	 else if (dec_addr_out2)		addr_out2 <= addr_out2_prev;
+	 //
+	 if (dec_addr_out3)			addr_out3 <= addr_out3_prev;
+	 else								addr_out3 <= addr_out3_last;
+	 //
+	 if (dec_addr_out4)			addr_out4 <= addr_out4_prev;
+	 else								addr_out4 <= addr_out4_last;
+	 //
+      end
+      //
+   end
+
+
+   //
+   // Write Enable Logic
+   //
+   wire	wren_out1;
+   wire	wren_out2;
+   wire	wren_out3;
+   wire	wren_out4;
+
+   wire [PROC_CNT_BITS-1:0] cnt_wren_out1_start	= 0 * BUFFER_NUM_WORDS + 2;
+   wire [PROC_CNT_BITS-1:0] cnt_wren_out1_stop	= 1 * BUFFER_NUM_WORDS + 1;
+
+   wire [PROC_CNT_BITS-1:0] cnt_wren_out2_start	= 0 * BUFFER_NUM_WORDS + 3;
+   wire [PROC_CNT_BITS-1:0] cnt_wren_out2_stop	= 1 * BUFFER_NUM_WORDS + 2;
+
+   wire [PROC_CNT_BITS-1:0] cnt_wren_out3_start	= 1 * BUFFER_NUM_WORDS + 1;
+   wire [PROC_CNT_BITS-1:0] cnt_wren_out3_stop	= 2 * BUFFER_NUM_WORDS + 0;
+
+   wire [PROC_CNT_BITS-1:0] cnt_wren_out4_start	= 1 * BUFFER_NUM_WORDS + 4;
+   wire [PROC_CNT_BITS-1:0] cnt_wren_out4_stop	= 2 * BUFFER_NUM_WORDS + 3;
+
+   assign wren_out1 = (proc_cnt >= cnt_wren_out1_start) && (proc_cnt <= cnt_wren_out1_stop);
+   assign wren_out2 = (proc_cnt >= cnt_wren_out2_start) && (proc_cnt <= cnt_wren_out2_stop);
+   assign wren_out3 = (proc_cnt >= cnt_wren_out3_start) && (proc_cnt <= cnt_wren_out3_stop);
+   assign wren_out4 = (proc_cnt >= cnt_wren_out4_start) && (proc_cnt <= cnt_wren_out4_stop);
+
+   assign r_dbl_wren				= wren_out1;
+   assign s_dbl_wren				= wren_out1;
+   assign r_plus_s_wren			= wren_out2;
+   assign u_half_wren			= wren_out3;
+   assign v_half_wren			= wren_out3;
+   assign u_minus_v_wren		= wren_out2;
+   assign v_minus_u_wren		= wren_out2;
+   assign u_minus_v_half_wren	= wren_out4;
+   assign v_minus_u_half_wren	= wren_out4;
+
+
+   //
+   // Adder (r + s)
+   //
+   wire [31: 0] 	    add32_r_plus_s_sum_out;
+   wire 		    add32_r_plus_s_carry_in;
+   wire 		    add32_r_plus_s_carry_out;
+
+   adder32_wrapper add32_r_plus_s
+     (
+      .clk		(clk),
+      .a			(r_din),
+      .b			(s_din),
+      .s			(add32_r_plus_s_sum_out),
+      .c_in		(add32_r_plus_s_carry_in),
+      .c_out	(add32_r_plus_s_carry_out)
+      );
+
+   //
+   // Subtractor (u - v)
+   //
+   wire [31: 0] 	    sub32_u_minus_v_difference_out;
+   wire 		    sub32_u_minus_v_borrow_in;
+   wire 		    sub32_u_minus_v_borrow_out;
+
+   subtractor32_wrapper sub32_u_minus_v
+     (
+      .clk		(clk),
+      .a			(u_din),
+      .b			(v_din),
+      .d			(sub32_u_minus_v_difference_out),
+      .b_in		(sub32_u_minus_v_borrow_in),
+      .b_out	(sub32_u_minus_v_borrow_out)
+      );
+
+   //
+   // Subtractor (v - u)
+   //
+   wire [31: 0] 	    sub32_v_minus_u_difference_out;
+   wire 		    sub32_v_minus_u_borrow_in;
+   wire 		    sub32_v_minus_u_borrow_out;
+
+   subtractor32_wrapper sub32_v_minus_u
+     (
+      .clk		(clk),
+      .a			(v_din),
+      .b			(u_din),
+      .d			(sub32_v_minus_u_difference_out),
+      .b_in		(sub32_v_minus_u_borrow_in),
+      .b_out	(sub32_v_minus_u_borrow_out)
+      );
+
+
+   //
+   // Carry & Borrow Masking Logic
+   //
+   reg 			    mask_carry_borrow;
+
+   always @(posedge clk)
+     //
+     mask_carry_borrow <= ((proc_cnt >= cnt_wren_out1_start) && (proc_cnt < cnt_wren_out1_stop)) ?
+			  1'b0 : 1'b1;
+
+   assign add32_r_plus_s_carry_in   = add32_r_plus_s_carry_out   & ~mask_carry_borrow;
+   assign sub32_u_minus_v_borrow_in = sub32_u_minus_v_borrow_out & ~mask_carry_borrow;
+   assign sub32_v_minus_u_borrow_in = sub32_v_minus_u_borrow_out & ~mask_carry_borrow;
+
+
+   //
+   // Carry Bits
+   //
+   reg 			    r_dbl_carry;
+   reg 			    s_dbl_carry;
+   reg 			    u_half_carry;
+   reg 			    v_half_carry;
+   reg 			    u_minus_v_half_carry;
+   reg 			    v_minus_u_half_carry;
+
+   always @(posedge clk) begin
+
+      r_dbl_carry					<= ((proc_cnt >= cnt_wren_out1_start) && (proc_cnt < cnt_wren_out1_stop)) ?
+							   r_din[31] : 1'b0;
+
+      s_dbl_carry					<= ((proc_cnt >= cnt_wren_out1_start) && (proc_cnt < cnt_wren_out1_stop)) ?
+							   s_din[31] : 1'b0;
+
+      u_half_carry				<= ((proc_cnt >= cnt_wren_out3_start) && (proc_cnt < cnt_wren_out3_stop)) ?
+						   u_din[0] : 1'b0;
+
+      v_half_carry				<= ((proc_cnt >= cnt_wren_out3_start) && (proc_cnt < cnt_wren_out3_stop)) ?
+						   v_din[0] : 1'b0;
+
+      u_minus_v_half_carry		<= ((proc_cnt >= cnt_wren_out4_start) && (proc_cnt < cnt_wren_out4_stop)) ?
+					   u_minus_v_din[0] : 1'b0;
+
+      v_minus_u_half_carry		<= ((proc_cnt >= cnt_wren_out4_start) && (proc_cnt < cnt_wren_out4_stop)) ?
+					   v_minus_u_din[0] : 1'b0;
+
+   end
+
+
+   //
+   // Data Mapper
+   //
+   assign r_dbl_dout				= {r_din[30:0], r_dbl_carry};
+   assign s_dbl_dout				= {s_din[30:0], s_dbl_carry};
+   assign r_plus_s_dout			= add32_r_plus_s_sum_out;
+   assign u_half_dout			= {u_half_carry, u_din[31:1]};
+   assign v_half_dout			= {v_half_carry, v_din[31:1]};
+   assign u_minus_v_dout		= sub32_u_minus_v_difference_out;
+   assign v_minus_u_dout		= sub32_v_minus_u_difference_out;
+   assign u_minus_v_half_dout	= {u_minus_v_half_carry, u_minus_v_din[31:1]};
+   assign v_minus_u_half_dout	= {v_minus_u_half_carry, v_minus_u_din[31:1]};
+
+
+   //
+   // Primary Counter Logic
+   //
+   always @(posedge clk or negedge rst_n)
+     //
+     if (rst_n == 1'b0) proc_cnt <= proc_cnt_zero;
+     else begin
+	if (!rdy)		proc_cnt <= proc_cnt_next;
+	else if (ena)	proc_cnt <= proc_cnt_next;
+     end
+
+
+endmodule
diff --git a/rtl/modular/modular_invertor/helper/modinv_helper_invert_update.v b/rtl/modular/modular_invertor/helper/modinv_helper_invert_update.v
index 0cd6ac5..ede2fc1 100644
--- a/rtl/modular/modular_invertor/helper/modinv_helper_invert_update.v
+++ b/rtl/modular/modular_invertor/helper/modinv_helper_invert_update.v
@@ -1,257 +1,257 @@
-`timescale 1ns / 1ps

-

-module modinv_helper_invert_update

-	(

-		clk, rst_n,

-		ena, rdy,

-		

-		u_gt_v, v_eq_1,
-		u_is_even, v_is_even,

-		

-		r_addr, r_wren, r_dout,

-		s_addr, s_wren, s_dout,

-		u_addr, u_wren, u_dout,

-		v_addr, v_wren, v_dout,

-		

-		r_dbl_addr,          r_dbl_din,

-		s_dbl_addr,          s_dbl_din,

-		r_plus_s_addr,       r_plus_s_din,

-		u_half_addr,         u_half_din,

-		v_half_addr,         v_half_din,

-		u_minus_v_half_addr, u_minus_v_half_din,

-		v_minus_u_half_addr, v_minus_u_half_din

-	);

-	

-	

-		//

-		// Parameters

-		//

-	parameter BUFFER_NUM_WORDS		= 9;

-	parameter BUFFER_ADDR_BITS		= 4;

-	

-	

-		//

-		// clog2

-		//

-`include "..\modinv_clog2.v"

-	

-	

-		//

-		// Constants

-		//

-	localparam PROC_NUM_CYCLES	= BUFFER_NUM_WORDS + 3;

-	localparam PROC_CNT_BITS	= clog2(PROC_NUM_CYCLES);

-	

-	

-		//

-		// Ports

-		//

-	input		wire									clk;

-	input		wire									rst_n;

-	input		wire									ena;

-	output	wire									rdy;

-

-	input		wire									u_gt_v;

-	input		wire									v_eq_1;
-	input		wire									u_is_even;

-	input		wire									v_is_even;

-		

-	output	wire	[BUFFER_ADDR_BITS-1:0]	r_addr;

-	output	wire	[BUFFER_ADDR_BITS-1:0]	s_addr;

-	output	wire	[BUFFER_ADDR_BITS-1:0]	u_addr;

-	output	wire	[BUFFER_ADDR_BITS-1:0]	v_addr;

-		

-	output	wire									r_wren;

-	output	wire									s_wren;

-	output	wire									u_wren;

-	output	wire									v_wren;

-		

-	output	wire	[              32-1:0]	r_dout;

-	output	wire	[              32-1:0]	s_dout;

-	output	wire	[              32-1:0]	u_dout;

-	output	wire	[              32-1:0]	v_dout;

-		

-	output	wire	[BUFFER_ADDR_BITS-1:0]	r_dbl_addr;

-	output	wire	[BUFFER_ADDR_BITS-1:0]	s_dbl_addr;

-	output	wire	[BUFFER_ADDR_BITS-1:0]	r_plus_s_addr;

-	output	wire	[BUFFER_ADDR_BITS-1:0]	u_half_addr;

-	output	wire	[BUFFER_ADDR_BITS-1:0]	v_half_addr;

-	output	wire	[BUFFER_ADDR_BITS-1:0]	u_minus_v_half_addr;

-	output	wire	[BUFFER_ADDR_BITS-1:0]	v_minus_u_half_addr;

-		

-	input		wire	[              32-1:0]	r_dbl_din;

-	input		wire	[              32-1:0]	s_dbl_din;

-	input		wire	[              32-1:0]	r_plus_s_din;

-	input		wire	[              32-1:0]	u_half_din;

-	input		wire	[              32-1:0]	v_half_din;

-	input		wire	[              32-1:0]	u_minus_v_half_din;

-	input		wire	[              32-1:0]	v_minus_u_half_din;

-		

-	

-		//

-		// Counter

-		//

-	reg	[PROC_CNT_BITS-1:0]	proc_cnt;

-

-	wire	[PROC_CNT_BITS-1:0]	proc_cnt_max	= PROC_NUM_CYCLES - 1;

-	wire	[PROC_CNT_BITS-1:0]	proc_cnt_zero	= {PROC_CNT_BITS{1'b0}};

-	wire	[PROC_CNT_BITS-1:0]	proc_cnt_next	= (proc_cnt < proc_cnt_max) ?

-																	proc_cnt + 1'b1 : proc_cnt_zero;

-	

-		//

-		// Addresses

-		//

-	reg	[BUFFER_ADDR_BITS-1:0]	addr_in;

-

-	wire	[BUFFER_ADDR_BITS-1:0]	addr_in_max		= BUFFER_NUM_WORDS - 1;

-	wire	[BUFFER_ADDR_BITS-1:0]	addr_in_zero	= {BUFFER_ADDR_BITS{1'b0}};

-	wire	[BUFFER_ADDR_BITS-1:0]	addr_in_next	= (addr_in < addr_in_max) ?

-																		addr_in + 1'b1 : addr_in_zero;

-																		

-	reg	[BUFFER_ADDR_BITS-1:0]	addr_out;

-	

-	wire	[BUFFER_ADDR_BITS-1:0]	addr_out_max	= BUFFER_NUM_WORDS - 1;

-	wire	[BUFFER_ADDR_BITS-1:0]	addr_out_zero	= {BUFFER_ADDR_BITS{1'b0}};

-	wire	[BUFFER_ADDR_BITS-1:0]	addr_out_next	= (addr_out < addr_out_max) ?

-																		addr_out + 1'b1 : addr_out_zero;

-																		

-	assign r_addr					= addr_out;

-	assign s_addr					= addr_out;

-	assign u_addr					= addr_out;

-	assign v_addr					= addr_out;

-	

-	assign r_dbl_addr				= addr_in;

-	assign s_dbl_addr				= addr_in;

-	assign r_plus_s_addr			= addr_in;

-	assign u_half_addr			= addr_in;

-	assign v_half_addr			= addr_in;

-	assign u_minus_v_half_addr	= addr_in;

-	assign v_minus_u_half_addr	= addr_in;

-	

-	

-		//

-		// Ready Flag

-		//

-	assign rdy = (proc_cnt == proc_cnt_zero);

-	

-	

-		//

-		// Address Increment Logic

-		//

-	wire	inc_addr_in;

-	wire	inc_addr_out;

-

-	wire	[PROC_CNT_BITS-1:0]	cnt_inc_addr_in_start	= 1;

-	wire	[PROC_CNT_BITS-1:0]	cnt_inc_addr_in_stop		= BUFFER_NUM_WORDS;

-	

-	wire	[PROC_CNT_BITS-1:0]	cnt_inc_addr_out_start	= 2;

-	wire	[PROC_CNT_BITS-1:0]	cnt_inc_addr_out_stop	= BUFFER_NUM_WORDS + 1;

-

-	assign inc_addr_in  = (proc_cnt >= cnt_inc_addr_in_start)  && (proc_cnt <= cnt_inc_addr_in_stop);

-	assign inc_addr_out = (proc_cnt >= cnt_inc_addr_out_start) && (proc_cnt <= cnt_inc_addr_out_stop);

-	

-	always @(posedge clk) begin

-		//

-		if (inc_addr_in)	addr_in <= addr_in_next;

-		else					addr_in <= addr_in_zero;

-		//

-		if (inc_addr_out)	addr_out <= addr_out_next;

-		else					addr_out <= addr_out_zero;

-		//

-	end

-	

-		//

-		// Write Enable Logic

-		//

-	wire	wren_out;

-

-	wire	[PROC_CNT_BITS-1:0]	cnt_wren_out_start	= 2;

-	wire	[PROC_CNT_BITS-1:0]	cnt_wren_out_stop		= BUFFER_NUM_WORDS + 1;

-

-	assign wren_out = (proc_cnt >= cnt_wren_out_start) && (proc_cnt <= cnt_wren_out_stop);

-

-	reg	r_wren_allow;

-	reg	s_wren_allow;

-	reg	u_wren_allow;

-	reg	v_wren_allow;

-

-	assign r_wren = wren_out && r_wren_allow && !v_eq_1 && !rdy;

-	assign s_wren = wren_out && s_wren_allow && !v_eq_1 && !rdy;

-	assign u_wren = wren_out && u_wren_allow && !v_eq_1 && !rdy;

-	assign v_wren = wren_out && v_wren_allow && !v_eq_1 && !rdy;

-	

-	

-		//

-		// Data Logic

-		//

-	reg	[31: 0]	r_dout_mux;

-	reg	[31: 0]	s_dout_mux;

-	reg	[31: 0]	u_dout_mux;

-	reg	[31: 0]	v_dout_mux;

-	

-	assign r_dout = r_dout_mux;

-	assign s_dout = s_dout_mux;

-	assign u_dout = u_dout_mux;

-	assign v_dout = v_dout_mux;

-	

-	always @(*) begin

-		//

-		// r, s, u, v

-		//

-		if (u_is_even) begin

-			//

-			u_dout_mux		= u_half_din;

-			v_dout_mux		= {32{1'bX}};

-			r_dout_mux		= {32{1'bX}};

-			s_dout_mux		= s_dbl_din;

-			//

-			u_wren_allow	= 1'b1;

-			v_wren_allow	= 1'b0;

-			r_wren_allow	= 1'b0;

-			s_wren_allow	= 1'b1;

-			//

-		end else begin

-			//

-			if (v_is_even) begin

-				//

-				u_dout_mux		= {32{1'bX}};

-				v_dout_mux		= v_half_din;

-				r_dout_mux		= r_dbl_din;

-				s_dout_mux		= {32{1'bX}};

-				//

-				u_wren_allow	= 1'b0;

-				v_wren_allow	= 1'b1;

-				r_wren_allow	= 1'b1;

-				s_wren_allow	= 1'b0;

-				//

-			end else begin

-				//

-				u_dout_mux		=  u_gt_v ? u_minus_v_half_din : {32{1'bX}};

-				v_dout_mux		=  u_gt_v ? {32{1'bX}}         : v_minus_u_half_din;

-				r_dout_mux		=  u_gt_v ? r_plus_s_din       : r_dbl_din;

-				s_dout_mux		=  u_gt_v ? s_dbl_din          : r_plus_s_din;

-				//

-				u_wren_allow	=  u_gt_v;

-				v_wren_allow	= !u_gt_v;

-				r_wren_allow	=  1'b1;

-				s_wren_allow	=  1'b1;

-				//

-			end

-			//

-		end

-		//

-	end

-		

-		

-		//

-		// Primary Counter Logic

-		//

-	always @(posedge clk or negedge rst_n)

-		//

-		if (rst_n == 1'b0) proc_cnt <= proc_cnt_zero;

-		else begin

-			if (!rdy)		proc_cnt <= proc_cnt_next;

-			else if (ena)	proc_cnt <= proc_cnt_next;

-		end

-

-endmodule

+`timescale 1ns / 1ps
+
+module modinv_helper_invert_update
+  (
+   clk, rst_n,
+   ena, rdy,
+
+   u_gt_v, v_eq_1,
+   u_is_even, v_is_even,
+
+   r_addr, r_wren, r_dout,
+   s_addr, s_wren, s_dout,
+   u_addr, u_wren, u_dout,
+   v_addr, v_wren, v_dout,
+
+   r_dbl_addr,          r_dbl_din,
+   s_dbl_addr,          s_dbl_din,
+   r_plus_s_addr,       r_plus_s_din,
+   u_half_addr,         u_half_din,
+   v_half_addr,         v_half_din,
+   u_minus_v_half_addr, u_minus_v_half_din,
+   v_minus_u_half_addr, v_minus_u_half_din
+   );
+
+
+   //
+   // Parameters
+   //
+   parameter BUFFER_NUM_WORDS		= 9;
+   parameter BUFFER_ADDR_BITS		= 4;
+
+
+   //
+   // clog2
+   //
+`include "../modinv_clog2.v"
+
+
+   //
+   // Constants
+   //
+   localparam PROC_NUM_CYCLES	= BUFFER_NUM_WORDS + 3;
+   localparam PROC_CNT_BITS	= clog2(PROC_NUM_CYCLES);
+
+
+   //
+   // Ports
+   //
+   input		wire									clk;
+   input		wire									rst_n;
+   input		wire									ena;
+   output	wire 										rdy;
+
+   input		wire									u_gt_v;
+   input		wire									v_eq_1;
+   input		wire									u_is_even;
+   input		wire									v_is_even;
+
+   output	wire [BUFFER_ADDR_BITS-1:0] 							r_addr;
+   output	wire [BUFFER_ADDR_BITS-1:0] 							s_addr;
+   output	wire [BUFFER_ADDR_BITS-1:0] 							u_addr;
+   output	wire [BUFFER_ADDR_BITS-1:0] 							v_addr;
+
+   output	wire 										r_wren;
+   output	wire 										s_wren;
+   output	wire 										u_wren;
+   output	wire 										v_wren;
+
+   output	wire [              32-1:0] 							r_dout;
+   output	wire [              32-1:0] 							s_dout;
+   output	wire [              32-1:0] 							u_dout;
+   output	wire [              32-1:0] 							v_dout;
+
+   output	wire [BUFFER_ADDR_BITS-1:0] 							r_dbl_addr;
+   output	wire [BUFFER_ADDR_BITS-1:0] 							s_dbl_addr;
+   output	wire [BUFFER_ADDR_BITS-1:0] 							r_plus_s_addr;
+   output	wire [BUFFER_ADDR_BITS-1:0] 							u_half_addr;
+   output	wire [BUFFER_ADDR_BITS-1:0] 							v_half_addr;
+   output	wire [BUFFER_ADDR_BITS-1:0] 							u_minus_v_half_addr;
+   output	wire [BUFFER_ADDR_BITS-1:0] 							v_minus_u_half_addr;
+
+   input		wire [              32-1:0] 						r_dbl_din;
+   input		wire [              32-1:0] 						s_dbl_din;
+   input		wire [              32-1:0] 						r_plus_s_din;
+   input		wire [              32-1:0] 						u_half_din;
+   input		wire [              32-1:0] 						v_half_din;
+   input		wire [              32-1:0] 						u_minus_v_half_din;
+   input		wire [              32-1:0] 						v_minus_u_half_din;
+
+
+   //
+   // Counter
+   //
+   reg [PROC_CNT_BITS-1:0] 									proc_cnt;
+
+   wire [PROC_CNT_BITS-1:0] 									proc_cnt_max	= PROC_NUM_CYCLES - 1;
+   wire [PROC_CNT_BITS-1:0] 									proc_cnt_zero	= {PROC_CNT_BITS{1'b0}};
+   wire [PROC_CNT_BITS-1:0] 									proc_cnt_next	= (proc_cnt < proc_cnt_max) ?
+												proc_cnt + 1'b1 : proc_cnt_zero;
+
+   //
+   // Addresses
+   //
+   reg [BUFFER_ADDR_BITS-1:0] 									addr_in;
+
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_in_max		= BUFFER_NUM_WORDS - 1;
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_in_zero	= {BUFFER_ADDR_BITS{1'b0}};
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_in_next	= (addr_in < addr_in_max) ?
+												addr_in + 1'b1 : addr_in_zero;
+
+   reg [BUFFER_ADDR_BITS-1:0] 									addr_out;
+
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_out_max	= BUFFER_NUM_WORDS - 1;
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_out_zero	= {BUFFER_ADDR_BITS{1'b0}};
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_out_next	= (addr_out < addr_out_max) ?
+												addr_out + 1'b1 : addr_out_zero;
+
+   assign r_addr					= addr_out;
+   assign s_addr					= addr_out;
+   assign u_addr					= addr_out;
+   assign v_addr					= addr_out;
+
+   assign r_dbl_addr				= addr_in;
+   assign s_dbl_addr				= addr_in;
+   assign r_plus_s_addr			= addr_in;
+   assign u_half_addr			= addr_in;
+   assign v_half_addr			= addr_in;
+   assign u_minus_v_half_addr	= addr_in;
+   assign v_minus_u_half_addr	= addr_in;
+
+
+   //
+   // Ready Flag
+   //
+   assign rdy = (proc_cnt == proc_cnt_zero);
+
+
+   //
+   // Address Increment Logic
+   //
+   wire 											inc_addr_in;
+   wire 											inc_addr_out;
+
+   wire [PROC_CNT_BITS-1:0] 									cnt_inc_addr_in_start	= 1;
+   wire [PROC_CNT_BITS-1:0] 									cnt_inc_addr_in_stop		= BUFFER_NUM_WORDS;
+
+   wire [PROC_CNT_BITS-1:0] 									cnt_inc_addr_out_start	= 2;
+   wire [PROC_CNT_BITS-1:0] 									cnt_inc_addr_out_stop	= BUFFER_NUM_WORDS + 1;
+
+   assign inc_addr_in  = (proc_cnt >= cnt_inc_addr_in_start)  && (proc_cnt <= cnt_inc_addr_in_stop);
+   assign inc_addr_out = (proc_cnt >= cnt_inc_addr_out_start) && (proc_cnt <= cnt_inc_addr_out_stop);
+
+   always @(posedge clk) begin
+      //
+      if (inc_addr_in)	addr_in <= addr_in_next;
+      else					addr_in <= addr_in_zero;
+      //
+      if (inc_addr_out)	addr_out <= addr_out_next;
+      else					addr_out <= addr_out_zero;
+      //
+   end
+
+   //
+   // Write Enable Logic
+   //
+   wire	wren_out;
+
+   wire [PROC_CNT_BITS-1:0] cnt_wren_out_start	= 2;
+   wire [PROC_CNT_BITS-1:0] cnt_wren_out_stop		= BUFFER_NUM_WORDS + 1;
+
+   assign wren_out = (proc_cnt >= cnt_wren_out_start) && (proc_cnt <= cnt_wren_out_stop);
+
+   reg 			    r_wren_allow;
+   reg 			    s_wren_allow;
+   reg 			    u_wren_allow;
+   reg 			    v_wren_allow;
+
+   assign r_wren = wren_out && r_wren_allow && !v_eq_1 && !rdy;
+   assign s_wren = wren_out && s_wren_allow && !v_eq_1 && !rdy;
+   assign u_wren = wren_out && u_wren_allow && !v_eq_1 && !rdy;
+   assign v_wren = wren_out && v_wren_allow && !v_eq_1 && !rdy;
+
+
+   //
+   // Data Logic
+   //
+   reg [31: 0] 		    r_dout_mux;
+   reg [31: 0] 		    s_dout_mux;
+   reg [31: 0] 		    u_dout_mux;
+   reg [31: 0] 		    v_dout_mux;
+
+   assign r_dout = r_dout_mux;
+   assign s_dout = s_dout_mux;
+   assign u_dout = u_dout_mux;
+   assign v_dout = v_dout_mux;
+
+   always @(*) begin
+      //
+      // r, s, u, v
+      //
+      if (u_is_even) begin
+	 //
+	 u_dout_mux		= u_half_din;
+	 v_dout_mux		= {32{1'bX}};
+	 r_dout_mux		= {32{1'bX}};
+	 s_dout_mux		= s_dbl_din;
+	 //
+	 u_wren_allow	= 1'b1;
+	 v_wren_allow	= 1'b0;
+	 r_wren_allow	= 1'b0;
+	 s_wren_allow	= 1'b1;
+	 //
+      end else begin
+	 //
+	 if (v_is_even) begin
+	    //
+	    u_dout_mux		= {32{1'bX}};
+	 v_dout_mux		= v_half_din;
+	 r_dout_mux		= r_dbl_din;
+	 s_dout_mux		= {32{1'bX}};
+	 //
+	 u_wren_allow	= 1'b0;
+	 v_wren_allow	= 1'b1;
+	 r_wren_allow	= 1'b1;
+	 s_wren_allow	= 1'b0;
+	 //
+      end else begin
+	 //
+	 u_dout_mux		=  u_gt_v ? u_minus_v_half_din : {32{1'bX}};
+	  v_dout_mux		=  u_gt_v ? {32{1'bX}}         : v_minus_u_half_din;
+	  r_dout_mux		=  u_gt_v ? r_plus_s_din       : r_dbl_din;
+	  s_dout_mux		=  u_gt_v ? s_dbl_din          : r_plus_s_din;
+	  //
+	  u_wren_allow	=  u_gt_v;
+	  v_wren_allow	= !u_gt_v;
+	  r_wren_allow	=  1'b1;
+	  s_wren_allow	=  1'b1;
+	  //
+       end
+	 //
+      end
+      //
+   end
+
+
+   //
+   // Primary Counter Logic
+   //
+   always @(posedge clk or negedge rst_n)
+     //
+     if (rst_n == 1'b0) proc_cnt <= proc_cnt_zero;
+     else begin
+	if (!rdy)		proc_cnt <= proc_cnt_next;
+	else if (ena)	proc_cnt <= proc_cnt_next;
+     end
+
+endmodule
diff --git a/rtl/modular/modular_invertor/helper/modinv_helper_reduce_precalc.v b/rtl/modular/modular_invertor/helper/modinv_helper_reduce_precalc.v
index fb858a6..b64b8e7 100644
--- a/rtl/modular/modular_invertor/helper/modinv_helper_reduce_precalc.v
+++ b/rtl/modular/modular_invertor/helper/modinv_helper_reduce_precalc.v
@@ -1,328 +1,328 @@
-`timescale 1ns / 1ps

-

-module modinv_helper_reduce_precalc

-	(

-		clk, rst_n,

-		ena, rdy,

-		

-		k,

-		

-		s_is_odd, k_is_nul,

-		

-		r_addr, r_din, r_wren, r_dout,

-		s_addr, s_din,

-		u_addr,        u_wren, u_dout,

-		v_addr,        v_wren, v_dout,

-		q_addr, q_din

-	);

-	

-

-		//

-		// Parameters

-		//

-	parameter OPERAND_NUM_WORDS	= 8;

-	parameter OPERAND_ADDR_BITS	= 3;

-	parameter BUFFER_NUM_WORDS		= 9;

-	parameter BUFFER_ADDR_BITS		= 4;

-	parameter K_NUM_BITS				= 10;

-	

-	

-		//

-		// clog2

-		//

-`include "..\modinv_clog2.v"

-	

-	

-		//

-		// Constants

-		//

-	localparam PROC_NUM_CYCLES	= 2 * BUFFER_NUM_WORDS + 4;

-	localparam PROC_CNT_BITS	= clog2(PROC_NUM_CYCLES);

-	

-	

-		//

-		// Ports

-		//

-	input		wire									clk;

-	input		wire									rst_n;

-	input		wire									ena;

-	output	wire									rdy;

-

-	input		wire	[       K_NUM_BITS-1:0]	k;

-		

-	output	wire									s_is_odd;

-	output	wire									k_is_nul;

-

-	output	wire	[ BUFFER_ADDR_BITS-1:0]	r_addr;

-	output	wire	[ BUFFER_ADDR_BITS-1:0]	s_addr;

-	output	wire	[ BUFFER_ADDR_BITS-1:0]	u_addr;

-	output	wire	[ BUFFER_ADDR_BITS-1:0]	v_addr;

-	output	wire	[OPERAND_ADDR_BITS-1:0]	q_addr;

-

-	input		wire	[              32-1:0]	r_din;

-	input		wire	[              32-1:0]	s_din;

-	input		wire	[              32-1:0]	q_din;

-	

-	output	wire									r_wren;

-	output	wire									u_wren;

-	output	wire									v_wren;

-	

-	output	wire	[              32-1:0]	r_dout;

-	output	wire	[              32-1:0]	u_dout;

-	output	wire	[              32-1:0]	v_dout;

-				

-

-		//

-		// Counter

-		//

-	reg	[PROC_CNT_BITS-1:0]	proc_cnt;

-

-	wire	[PROC_CNT_BITS-1:0]	proc_cnt_max	= PROC_NUM_CYCLES - 1;

-	wire	[PROC_CNT_BITS-1:0]	proc_cnt_zero	= {PROC_CNT_BITS{1'b0}};

-	wire	[PROC_CNT_BITS-1:0]	proc_cnt_next	= (proc_cnt < proc_cnt_max) ?

-																	proc_cnt + 1'b1 : proc_cnt_zero;

-	

-		//

-		// Addresses

-		//

-	reg	[ BUFFER_ADDR_BITS-1:0]	addr_in_buf;

-	reg	[OPERAND_ADDR_BITS-1:0]	addr_in_op;

-	reg	[ BUFFER_ADDR_BITS-1:0]	addr_out1;

-	reg	[ BUFFER_ADDR_BITS-1:0]	addr_out2;

-	reg	[ BUFFER_ADDR_BITS-1:0]	addr_out3;
-
-	wire	[ BUFFER_ADDR_BITS-1:0]	addr_in_buf_last	= BUFFER_NUM_WORDS - 1;
-	wire	[ BUFFER_ADDR_BITS-1:0]	addr_in_buf_zero	= {BUFFER_ADDR_BITS{1'b0}};
-	wire	[ BUFFER_ADDR_BITS-1:0]	addr_in_buf_next	= (addr_in_buf < addr_in_buf_last) ?
-																		addr_in_buf + 1'b1 : addr_in_buf_zero;
-	wire	[ BUFFER_ADDR_BITS-1:0]	addr_in_buf_prev	= (addr_in_buf > addr_in_buf_zero) ?
-																		addr_in_buf - 1'b1 : addr_in_buf_zero;
-

-	wire	[OPERAND_ADDR_BITS-1:0]	addr_in_op_last	= OPERAND_NUM_WORDS - 1;
-	wire	[OPERAND_ADDR_BITS-1:0]	addr_in_op_zero	= {OPERAND_ADDR_BITS{1'b0}};
-	wire	[OPERAND_ADDR_BITS-1:0]	addr_in_op_next	= (addr_in_op < addr_in_op_last) ?
-																		addr_in_op + 1'b1 : addr_in_op_zero;

-																		
-	wire	[BUFFER_ADDR_BITS-1:0]	addr_out1_last	= BUFFER_NUM_WORDS - 1;
-	wire	[BUFFER_ADDR_BITS-1:0]	addr_out1_zero	= {BUFFER_ADDR_BITS{1'b0}};
-	wire	[BUFFER_ADDR_BITS-1:0]	addr_out1_next	= (addr_out1 < addr_out1_last) ?
-																		addr_out1 + 1'b1 : addr_out1_zero;
-	wire	[BUFFER_ADDR_BITS-1:0]	addr_out1_prev	= (addr_out1 > addr_out1_zero) ?
-																		addr_out1 - 1'b1 : addr_out1_zero;
-	
-	wire	[BUFFER_ADDR_BITS-1:0]	addr_out2_last	= BUFFER_NUM_WORDS - 1;
-	wire	[BUFFER_ADDR_BITS-1:0]	addr_out2_zero	= {BUFFER_ADDR_BITS{1'b0}};
-	wire	[BUFFER_ADDR_BITS-1:0]	addr_out2_prev	= (addr_out2 > addr_out2_zero) ?
-																		addr_out2 - 1'b1 : addr_out2_last;
-

-	wire	[BUFFER_ADDR_BITS-1:0]	addr_out3_last	= BUFFER_NUM_WORDS - 1;
-	wire	[BUFFER_ADDR_BITS-1:0]	addr_out3_zero	= {BUFFER_ADDR_BITS{1'b0}};
-	wire	[BUFFER_ADDR_BITS-1:0]	addr_out3_prev	= (addr_out3 > addr_out3_zero) ?
-																		addr_out3 - 1'b1 : addr_out3_last;
-

-	

-	assign s_addr = addr_in_buf;

-	assign q_addr = addr_in_op;

-	assign r_addr = addr_out1;

-	assign u_addr = addr_out2;

-	assign v_addr = addr_out3;

-	

-	

-		//
-		// Ready Flag
-		//
-	assign rdy = (proc_cnt == proc_cnt_zero);
-		

-		

-		//
-		// Address Increment/Decrement Logic
-		//
-	wire	inc_addr_buf_in;
-	wire	dec_addr_buf_in;

-	wire	inc_addr_op_in;

-	wire	inc_addr_out1;

-	wire	dec_addr_out1;

-	wire	dec_addr_out2;

-	wire	dec_addr_out3;

-

-	wire	[PROC_CNT_BITS-1:0]	cnt_calc_flags					= 0 * BUFFER_NUM_WORDS + 2;
-	

-	wire	[PROC_CNT_BITS-1:0]	cnt_inc_addr_buf_in_start	= 0 * BUFFER_NUM_WORDS + 1;
-	wire	[PROC_CNT_BITS-1:0]	cnt_inc_addr_buf_in_stop	= 1 * BUFFER_NUM_WORDS - 1;
-
-	wire	[PROC_CNT_BITS-1:0]	cnt_dec_addr_buf_in_start	= 1 * BUFFER_NUM_WORDS + 0;
-	wire	[PROC_CNT_BITS-1:0]	cnt_dec_addr_buf_in_stop	= 2 * BUFFER_NUM_WORDS - 2;	

-

-	wire	[PROC_CNT_BITS-1:0]	cnt_inc_addr_op_in_start	= 0 * OPERAND_NUM_WORDS + 1;
-	wire	[PROC_CNT_BITS-1:0]	cnt_inc_addr_op_in_stop		= 1 * OPERAND_NUM_WORDS + 0;

-	
-	wire	[PROC_CNT_BITS-1:0]	cnt_inc_addr_out1_start		= 0 * BUFFER_NUM_WORDS + 3;
-	wire	[PROC_CNT_BITS-1:0]	cnt_inc_addr_out1_stop		= 1 * BUFFER_NUM_WORDS + 1;
-	
-	wire	[PROC_CNT_BITS-1:0]	cnt_dec_addr_out1_start		= 1 * BUFFER_NUM_WORDS + 3;
-	wire	[PROC_CNT_BITS-1:0]	cnt_dec_addr_out1_stop		= 2 * BUFFER_NUM_WORDS + 1;	
-

-	wire	[PROC_CNT_BITS-1:0]	cnt_dec_addr_out2_start		= 1 * BUFFER_NUM_WORDS + 1;
-	wire	[PROC_CNT_BITS-1:0]	cnt_dec_addr_out2_stop		= 2 * BUFFER_NUM_WORDS + 0;

-	

-	wire	[PROC_CNT_BITS-1:0]	cnt_dec_addr_out3_start		= 1 * BUFFER_NUM_WORDS + 4;
-	wire	[PROC_CNT_BITS-1:0]	cnt_dec_addr_out3_stop		= 2 * BUFFER_NUM_WORDS + 3;

-

-	assign inc_addr_buf_in = (proc_cnt >= cnt_inc_addr_buf_in_start) && (proc_cnt <= cnt_inc_addr_buf_in_stop);
-	assign dec_addr_buf_in = (proc_cnt >= cnt_dec_addr_buf_in_start) && (proc_cnt <= cnt_dec_addr_buf_in_stop);

-	assign inc_addr_op_in  = (proc_cnt >= cnt_inc_addr_op_in_start)  && (proc_cnt <= cnt_inc_addr_op_in_stop);
-	assign inc_addr_out1   = (proc_cnt >= cnt_inc_addr_out1_start) && (proc_cnt <= cnt_inc_addr_out1_stop);
-	assign dec_addr_out1   = (proc_cnt >= cnt_dec_addr_out1_start) && (proc_cnt <= cnt_dec_addr_out1_stop);
-	assign dec_addr_out2   = (proc_cnt >= cnt_dec_addr_out2_start) && (proc_cnt <= cnt_dec_addr_out2_stop);

-	assign dec_addr_out3   = (proc_cnt >= cnt_dec_addr_out3_start) && (proc_cnt <= cnt_dec_addr_out3_stop);
-

-	always @(posedge clk) begin
-		//
-		if (rdy) begin
-			//
-			addr_in_buf		<= addr_in_buf_zero;

-			addr_in_op		<= addr_in_op_zero;

-			addr_out1		<= addr_out1_zero;

-			addr_out2		<= addr_out2_last;

-			addr_out3		<= addr_out3_last;
-			//
-		end else begin
-			//
-			if (inc_addr_buf_in)			addr_in_buf	<= addr_in_buf_next;
-			else if (dec_addr_buf_in)	addr_in_buf	<= addr_in_buf_prev;

-			//

-			if (inc_addr_op_in)			addr_in_op	<= addr_in_op_next;

-			else								addr_in_op	<= addr_in_op_zero;
-			//

-			if (inc_addr_out1)			addr_out1	<= addr_out1_next;
-			else if (dec_addr_out1)		addr_out1	<= addr_out1_prev;

-			//

-			if (dec_addr_out2)			addr_out2	<= addr_out2_prev;
-			else								addr_out2	<= addr_out2_last;

-			//

-			if (dec_addr_out3)			addr_out3	<= addr_out3_prev;
-			else								addr_out3	<= addr_out3_last;

-			//
-		end
-		//
-	end
-	

-	

-		//
-		// Write Enable Logic
-		//
-	wire	wren_out1;

-	wire	wren_out2;

-	wire	wren_out3;
-
-	wire	[PROC_CNT_BITS-1:0]	cnt_wren_out1_start	= 0 * BUFFER_NUM_WORDS + 3;
-	wire	[PROC_CNT_BITS-1:0]	cnt_wren_out1_stop	= 1 * BUFFER_NUM_WORDS + 2;
-

-	wire	[PROC_CNT_BITS-1:0]	cnt_wren_out2_start	= 1 * BUFFER_NUM_WORDS + 1;
-	wire	[PROC_CNT_BITS-1:0]	cnt_wren_out2_stop	= 2 * BUFFER_NUM_WORDS + 0;
-

-	wire	[PROC_CNT_BITS-1:0]	cnt_wren_out3_start	= 1 * BUFFER_NUM_WORDS + 4;
-	wire	[PROC_CNT_BITS-1:0]	cnt_wren_out3_stop	= 2 * BUFFER_NUM_WORDS + 3;
-
-	assign wren_out1 = (proc_cnt >= cnt_wren_out1_start) && (proc_cnt <= cnt_wren_out1_stop);
-	assign wren_out2 = (proc_cnt >= cnt_wren_out2_start) && (proc_cnt <= cnt_wren_out2_stop);

-	assign wren_out3 = (proc_cnt >= cnt_wren_out3_start) && (proc_cnt <= cnt_wren_out3_stop);
-
-	assign r_wren = wren_out1;
-	assign u_wren = wren_out2;

-	assign v_wren = wren_out3;

-	

-		//
-		// Adder (s + q)
-		//

-	wire	[31: 0]	q_din_masked;
-	wire	[31: 0]	add32_s_plus_q_sum_out;
-	wire				add32_s_plus_q_carry_in;
-	wire				add32_s_plus_q_carry_out;
-	
-	adder32_wrapper add32_r_plus_s
-	(
-		.clk		(clk),
-		.a			(s_din),
-		.b			(q_din_masked),
-		.s			(add32_s_plus_q_sum_out),
-		.c_in		(add32_s_plus_q_carry_in),
-		.c_out	(add32_s_plus_q_carry_out)
-	);

-		

-		

-		//
-		// Carry Masking Logic
-		//
-	wire	mask_carry;
-

-	assign mask_carry = ((proc_cnt >= cnt_wren_out1_start) && (proc_cnt < cnt_wren_out1_stop)) ? 1'b0 : 1'b1;

-

-

-		//

-		// Addend Masking Logic

-		//

-	reg	q_din_mask;

-	

-	always @(posedge clk)

-		q_din_mask <= (addr_in_buf == addr_in_buf_last) ? 1'b1 : 1'b0;
-	

-	assign q_din_masked = q_din_mask ? {32{1'b0}} : q_din;

-	
-	assign add32_s_plus_q_carry_in = add32_s_plus_q_carry_out & ~mask_carry;
-

-

-		//
-		// Carry Bits
-		//
-	reg	s_half_carry;
-	reg	s_plus_q_half_carry;
-	
-	always @(posedge clk) begin

-		//					
-		s_half_carry				<= ((proc_cnt >= cnt_wren_out2_start) && (proc_cnt < cnt_wren_out2_stop)) ?
-											s_din[0] : 1'b0;
-		//
-		s_plus_q_half_carry		<= ((proc_cnt >= cnt_wren_out3_start) && (proc_cnt < cnt_wren_out3_stop)) ?
-											r_din[0] : 1'b0;

-		//
-	end

-

-		//
-		// Data Mapper
-		//
-	assign r_dout = add32_s_plus_q_sum_out;

-	assign u_dout = {s_half_carry,        s_din[31:1]};
-	assign v_dout = {s_plus_q_half_carry, r_din[31:1]};

-	

-	
-		//

-		// Primary Counter Logic

-		//

-	always @(posedge clk or negedge rst_n)

-		//

-		if (rst_n == 1'b0) proc_cnt <= proc_cnt_zero;

-		else begin

-			if (!rdy)		proc_cnt <= proc_cnt_next;

-			else if (ena)	proc_cnt <= proc_cnt_next;

-		end

-		

-		

-		//

-		// Output Flags

-		//

-	reg	s_is_odd_reg;

-	reg	k_is_nul_reg;

-	

-	assign s_is_odd = s_is_odd_reg;

-	assign k_is_nul = k_is_nul_reg;

-

-	always @(posedge clk)

-		//

-		if (proc_cnt == cnt_calc_flags) begin

-			s_is_odd_reg <= s_din[0];

-			k_is_nul_reg <= (k == {K_NUM_BITS{1'b0}}) ? 1'b1 : 1'b0;

-		end

-

-

-endmodule

+`timescale 1ns / 1ps
+
+module modinv_helper_reduce_precalc
+  (
+   clk, rst_n,
+   ena, rdy,
+
+   k,
+
+   s_is_odd, k_is_nul,
+
+   r_addr, r_din, r_wren, r_dout,
+   s_addr, s_din,
+   u_addr,        u_wren, u_dout,
+   v_addr,        v_wren, v_dout,
+   q_addr, q_din
+   );
+
+
+   //
+   // Parameters
+   //
+   parameter OPERAND_NUM_WORDS	= 8;
+   parameter OPERAND_ADDR_BITS	= 3;
+   parameter BUFFER_NUM_WORDS		= 9;
+   parameter BUFFER_ADDR_BITS		= 4;
+   parameter K_NUM_BITS				= 10;
+
+
+   //
+   // clog2
+   //
+`include "../modinv_clog2.v"
+
+
+   //
+   // Constants
+   //
+   localparam PROC_NUM_CYCLES	= 2 * BUFFER_NUM_WORDS + 4;
+   localparam PROC_CNT_BITS	= clog2(PROC_NUM_CYCLES);
+
+
+   //
+   // Ports
+   //
+   input		wire									clk;
+   input		wire									rst_n;
+   input		wire									ena;
+   output	wire 										rdy;
+
+   input		wire [       K_NUM_BITS-1:0] 						k;
+
+   output	wire 										s_is_odd;
+   output	wire 										k_is_nul;
+
+   output	wire [ BUFFER_ADDR_BITS-1:0] 							r_addr;
+   output	wire [ BUFFER_ADDR_BITS-1:0] 							s_addr;
+   output	wire [ BUFFER_ADDR_BITS-1:0] 							u_addr;
+   output	wire [ BUFFER_ADDR_BITS-1:0] 							v_addr;
+   output	wire [OPERAND_ADDR_BITS-1:0] 							q_addr;
+
+   input		wire [              32-1:0] 						r_din;
+   input		wire [              32-1:0] 						s_din;
+   input		wire [              32-1:0] 						q_din;
+
+   output	wire 										r_wren;
+   output	wire 										u_wren;
+   output	wire 										v_wren;
+
+   output	wire [              32-1:0] 							r_dout;
+   output	wire [              32-1:0] 							u_dout;
+   output	wire [              32-1:0] 							v_dout;
+
+
+   //
+   // Counter
+   //
+   reg [PROC_CNT_BITS-1:0] 									proc_cnt;
+
+   wire [PROC_CNT_BITS-1:0] 									proc_cnt_max	= PROC_NUM_CYCLES - 1;
+   wire [PROC_CNT_BITS-1:0] 									proc_cnt_zero	= {PROC_CNT_BITS{1'b0}};
+   wire [PROC_CNT_BITS-1:0] 									proc_cnt_next	= (proc_cnt < proc_cnt_max) ?
+												proc_cnt + 1'b1 : proc_cnt_zero;
+
+   //
+   // Addresses
+   //
+   reg [ BUFFER_ADDR_BITS-1:0] 									addr_in_buf;
+   reg [OPERAND_ADDR_BITS-1:0] 									addr_in_op;
+   reg [ BUFFER_ADDR_BITS-1:0] 									addr_out1;
+   reg [ BUFFER_ADDR_BITS-1:0] 									addr_out2;
+   reg [ BUFFER_ADDR_BITS-1:0] 									addr_out3;
+
+   wire [ BUFFER_ADDR_BITS-1:0] 								addr_in_buf_last	= BUFFER_NUM_WORDS - 1;
+   wire [ BUFFER_ADDR_BITS-1:0] 								addr_in_buf_zero	= {BUFFER_ADDR_BITS{1'b0}};
+   wire [ BUFFER_ADDR_BITS-1:0] 								addr_in_buf_next	= (addr_in_buf < addr_in_buf_last) ?
+												addr_in_buf + 1'b1 : addr_in_buf_zero;
+   wire [ BUFFER_ADDR_BITS-1:0] 								addr_in_buf_prev	= (addr_in_buf > addr_in_buf_zero) ?
+												addr_in_buf - 1'b1 : addr_in_buf_zero;
+
+   wire [OPERAND_ADDR_BITS-1:0] 								addr_in_op_last	= OPERAND_NUM_WORDS - 1;
+   wire [OPERAND_ADDR_BITS-1:0] 								addr_in_op_zero	= {OPERAND_ADDR_BITS{1'b0}};
+   wire [OPERAND_ADDR_BITS-1:0] 								addr_in_op_next	= (addr_in_op < addr_in_op_last) ?
+												addr_in_op + 1'b1 : addr_in_op_zero;
+
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_out1_last	= BUFFER_NUM_WORDS - 1;
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_out1_zero	= {BUFFER_ADDR_BITS{1'b0}};
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_out1_next	= (addr_out1 < addr_out1_last) ?
+												addr_out1 + 1'b1 : addr_out1_zero;
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_out1_prev	= (addr_out1 > addr_out1_zero) ?
+												addr_out1 - 1'b1 : addr_out1_zero;
+
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_out2_last	= BUFFER_NUM_WORDS - 1;
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_out2_zero	= {BUFFER_ADDR_BITS{1'b0}};
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_out2_prev	= (addr_out2 > addr_out2_zero) ?
+												addr_out2 - 1'b1 : addr_out2_last;
+
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_out3_last	= BUFFER_NUM_WORDS - 1;
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_out3_zero	= {BUFFER_ADDR_BITS{1'b0}};
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_out3_prev	= (addr_out3 > addr_out3_zero) ?
+												addr_out3 - 1'b1 : addr_out3_last;
+
+
+   assign s_addr = addr_in_buf;
+   assign q_addr = addr_in_op;
+   assign r_addr = addr_out1;
+   assign u_addr = addr_out2;
+   assign v_addr = addr_out3;
+
+
+   //
+   // Ready Flag
+   //
+   assign rdy = (proc_cnt == proc_cnt_zero);
+
+
+   //
+   // Address Increment/Decrement Logic
+   //
+   wire 											inc_addr_buf_in;
+   wire 											dec_addr_buf_in;
+   wire 											inc_addr_op_in;
+   wire 											inc_addr_out1;
+   wire 											dec_addr_out1;
+   wire 											dec_addr_out2;
+   wire 											dec_addr_out3;
+
+   wire [PROC_CNT_BITS-1:0] 									cnt_calc_flags					= 0 * BUFFER_NUM_WORDS + 2;
+
+   wire [PROC_CNT_BITS-1:0] 									cnt_inc_addr_buf_in_start	= 0 * BUFFER_NUM_WORDS + 1;
+   wire [PROC_CNT_BITS-1:0] 									cnt_inc_addr_buf_in_stop	= 1 * BUFFER_NUM_WORDS - 1;
+
+   wire [PROC_CNT_BITS-1:0] 									cnt_dec_addr_buf_in_start	= 1 * BUFFER_NUM_WORDS + 0;
+   wire [PROC_CNT_BITS-1:0] 									cnt_dec_addr_buf_in_stop	= 2 * BUFFER_NUM_WORDS - 2;
+
+   wire [PROC_CNT_BITS-1:0] 									cnt_inc_addr_op_in_start	= 0 * OPERAND_NUM_WORDS + 1;
+   wire [PROC_CNT_BITS-1:0] 									cnt_inc_addr_op_in_stop		= 1 * OPERAND_NUM_WORDS + 0;
+
+   wire [PROC_CNT_BITS-1:0] 									cnt_inc_addr_out1_start		= 0 * BUFFER_NUM_WORDS + 3;
+   wire [PROC_CNT_BITS-1:0] 									cnt_inc_addr_out1_stop		= 1 * BUFFER_NUM_WORDS + 1;
+
+   wire [PROC_CNT_BITS-1:0] 									cnt_dec_addr_out1_start		= 1 * BUFFER_NUM_WORDS + 3;
+   wire [PROC_CNT_BITS-1:0] 									cnt_dec_addr_out1_stop		= 2 * BUFFER_NUM_WORDS + 1;
+
+   wire [PROC_CNT_BITS-1:0] 									cnt_dec_addr_out2_start		= 1 * BUFFER_NUM_WORDS + 1;
+   wire [PROC_CNT_BITS-1:0] 									cnt_dec_addr_out2_stop		= 2 * BUFFER_NUM_WORDS + 0;
+
+   wire [PROC_CNT_BITS-1:0] 									cnt_dec_addr_out3_start		= 1 * BUFFER_NUM_WORDS + 4;
+   wire [PROC_CNT_BITS-1:0] 									cnt_dec_addr_out3_stop		= 2 * BUFFER_NUM_WORDS + 3;
+
+   assign inc_addr_buf_in = (proc_cnt >= cnt_inc_addr_buf_in_start) && (proc_cnt <= cnt_inc_addr_buf_in_stop);
+   assign dec_addr_buf_in = (proc_cnt >= cnt_dec_addr_buf_in_start) && (proc_cnt <= cnt_dec_addr_buf_in_stop);
+   assign inc_addr_op_in  = (proc_cnt >= cnt_inc_addr_op_in_start)  && (proc_cnt <= cnt_inc_addr_op_in_stop);
+   assign inc_addr_out1   = (proc_cnt >= cnt_inc_addr_out1_start) && (proc_cnt <= cnt_inc_addr_out1_stop);
+   assign dec_addr_out1   = (proc_cnt >= cnt_dec_addr_out1_start) && (proc_cnt <= cnt_dec_addr_out1_stop);
+   assign dec_addr_out2   = (proc_cnt >= cnt_dec_addr_out2_start) && (proc_cnt <= cnt_dec_addr_out2_stop);
+   assign dec_addr_out3   = (proc_cnt >= cnt_dec_addr_out3_start) && (proc_cnt <= cnt_dec_addr_out3_stop);
+
+   always @(posedge clk) begin
+      //
+      if (rdy) begin
+	 //
+	 addr_in_buf		<= addr_in_buf_zero;
+	 addr_in_op		<= addr_in_op_zero;
+	 addr_out1		<= addr_out1_zero;
+	 addr_out2		<= addr_out2_last;
+	 addr_out3		<= addr_out3_last;
+	 //
+      end else begin
+	 //
+	 if (inc_addr_buf_in)			addr_in_buf	<= addr_in_buf_next;
+	 else if (dec_addr_buf_in)	addr_in_buf	<= addr_in_buf_prev;
+	 //
+	 if (inc_addr_op_in)			addr_in_op	<= addr_in_op_next;
+	 else								addr_in_op	<= addr_in_op_zero;
+	 //
+	 if (inc_addr_out1)			addr_out1	<= addr_out1_next;
+	 else if (dec_addr_out1)		addr_out1	<= addr_out1_prev;
+	 //
+	 if (dec_addr_out2)			addr_out2	<= addr_out2_prev;
+	 else								addr_out2	<= addr_out2_last;
+	 //
+	 if (dec_addr_out3)			addr_out3	<= addr_out3_prev;
+	 else								addr_out3	<= addr_out3_last;
+	 //
+      end
+      //
+   end
+
+
+   //
+   // Write Enable Logic
+   //
+   wire	wren_out1;
+   wire	wren_out2;
+   wire	wren_out3;
+
+   wire [PROC_CNT_BITS-1:0] cnt_wren_out1_start	= 0 * BUFFER_NUM_WORDS + 3;
+   wire [PROC_CNT_BITS-1:0] cnt_wren_out1_stop	= 1 * BUFFER_NUM_WORDS + 2;
+
+   wire [PROC_CNT_BITS-1:0] cnt_wren_out2_start	= 1 * BUFFER_NUM_WORDS + 1;
+   wire [PROC_CNT_BITS-1:0] cnt_wren_out2_stop	= 2 * BUFFER_NUM_WORDS + 0;
+
+   wire [PROC_CNT_BITS-1:0] cnt_wren_out3_start	= 1 * BUFFER_NUM_WORDS + 4;
+   wire [PROC_CNT_BITS-1:0] cnt_wren_out3_stop	= 2 * BUFFER_NUM_WORDS + 3;
+
+   assign wren_out1 = (proc_cnt >= cnt_wren_out1_start) && (proc_cnt <= cnt_wren_out1_stop);
+   assign wren_out2 = (proc_cnt >= cnt_wren_out2_start) && (proc_cnt <= cnt_wren_out2_stop);
+   assign wren_out3 = (proc_cnt >= cnt_wren_out3_start) && (proc_cnt <= cnt_wren_out3_stop);
+
+   assign r_wren = wren_out1;
+   assign u_wren = wren_out2;
+   assign v_wren = wren_out3;
+
+   //
+   // Adder (s + q)
+   //
+   wire [31: 0] 	    q_din_masked;
+   wire [31: 0] 	    add32_s_plus_q_sum_out;
+   wire 		    add32_s_plus_q_carry_in;
+   wire 		    add32_s_plus_q_carry_out;
+
+   adder32_wrapper add32_r_plus_s
+     (
+      .clk		(clk),
+      .a			(s_din),
+      .b			(q_din_masked),
+      .s			(add32_s_plus_q_sum_out),
+      .c_in		(add32_s_plus_q_carry_in),
+      .c_out	(add32_s_plus_q_carry_out)
+      );
+
+
+   //
+   // Carry Masking Logic
+   //
+   wire 		    mask_carry;
+
+   assign mask_carry = ((proc_cnt >= cnt_wren_out1_start) && (proc_cnt < cnt_wren_out1_stop)) ? 1'b0 : 1'b1;
+
+
+   //
+   // Addend Masking Logic
+   //
+   reg 			    q_din_mask;
+
+   always @(posedge clk)
+     q_din_mask <= (addr_in_buf == addr_in_buf_last) ? 1'b1 : 1'b0;
+
+   assign q_din_masked = q_din_mask ? {32{1'b0}} : q_din;
+
+   assign add32_s_plus_q_carry_in = add32_s_plus_q_carry_out & ~mask_carry;
+
+
+   //
+   // Carry Bits
+   //
+   reg 			    s_half_carry;
+   reg 			    s_plus_q_half_carry;
+
+   always @(posedge clk) begin
+      //
+      s_half_carry				<= ((proc_cnt >= cnt_wren_out2_start) && (proc_cnt < cnt_wren_out2_stop)) ?
+						   s_din[0] : 1'b0;
+      //
+      s_plus_q_half_carry		<= ((proc_cnt >= cnt_wren_out3_start) && (proc_cnt < cnt_wren_out3_stop)) ?
+					   r_din[0] : 1'b0;
+      //
+   end
+
+   //
+   // Data Mapper
+   //
+   assign r_dout = add32_s_plus_q_sum_out;
+   assign u_dout = {s_half_carry,        s_din[31:1]};
+   assign v_dout = {s_plus_q_half_carry, r_din[31:1]};
+
+
+   //
+   // Primary Counter Logic
+   //
+   always @(posedge clk or negedge rst_n)
+     //
+     if (rst_n == 1'b0) proc_cnt <= proc_cnt_zero;
+     else begin
+	if (!rdy)		proc_cnt <= proc_cnt_next;
+	else if (ena)	proc_cnt <= proc_cnt_next;
+     end
+
+
+   //
+   // Output Flags
+   //
+   reg	s_is_odd_reg;
+   reg	k_is_nul_reg;
+
+   assign s_is_odd = s_is_odd_reg;
+   assign k_is_nul = k_is_nul_reg;
+
+   always @(posedge clk)
+     //
+     if (proc_cnt == cnt_calc_flags) begin
+	s_is_odd_reg <= s_din[0];
+	k_is_nul_reg <= (k == {K_NUM_BITS{1'b0}}) ? 1'b1 : 1'b0;
+     end
+
+
+endmodule
diff --git a/rtl/modular/modular_invertor/helper/modinv_helper_reduce_update.v b/rtl/modular/modular_invertor/helper/modinv_helper_reduce_update.v
index ea5b854..b6c63b2 100644
--- a/rtl/modular/modular_invertor/helper/modinv_helper_reduce_update.v
+++ b/rtl/modular/modular_invertor/helper/modinv_helper_reduce_update.v
@@ -1,153 +1,153 @@
-`timescale 1ns / 1ps

-

-module modinv_helper_reduce_update

-	(

-		clk, rst_n,

-		ena, rdy,

-		

-		s_is_odd, k_is_nul,

-		

-		s_addr, s_wren, s_dout,

-		u_addr,                 u_din,

-		v_addr,                 v_din

-	);

-	

-	

-		//

-		// Parameters

-		//

-	parameter BUFFER_NUM_WORDS		= 9;

-	parameter BUFFER_ADDR_BITS		= 4;

-	

-	

-		//

-		// clog2

-		//

-`include "..\modinv_clog2.v"

-	

-	

-		//

-		// Constants

-		//

-	localparam PROC_NUM_CYCLES	= BUFFER_NUM_WORDS + 3;

-	localparam PROC_CNT_BITS	= clog2(PROC_NUM_CYCLES);

-	

-	

-		//

-		// Ports

-		//

-	input		wire									clk;

-	input		wire									rst_n;

-	input		wire									ena;

-	output	wire									rdy;

-

-	input		wire									s_is_odd;

-	input		wire									k_is_nul;
-		

-	output	wire	[BUFFER_ADDR_BITS-1:0]	s_addr;

-	output	wire	[BUFFER_ADDR_BITS-1:0]	u_addr;

-	output	wire	[BUFFER_ADDR_BITS-1:0]	v_addr;

-		

-	output	wire									s_wren;

-		

-	output	wire	[              32-1:0]	s_dout;

-

-	input		wire	[              32-1:0]	u_din;

-	input		wire	[              32-1:0]	v_din;

-		

-	

-		//

-		// Counter

-		//

-	reg	[PROC_CNT_BITS-1:0]	proc_cnt;

-

-	wire	[PROC_CNT_BITS-1:0]	proc_cnt_max	= PROC_NUM_CYCLES - 1;

-	wire	[PROC_CNT_BITS-1:0]	proc_cnt_zero	= {PROC_CNT_BITS{1'b0}};

-	wire	[PROC_CNT_BITS-1:0]	proc_cnt_next	= (proc_cnt < proc_cnt_max) ?

-																	proc_cnt + 1'b1 : proc_cnt_zero;

-	

-		//

-		// Addresses

-		//

-	reg	[BUFFER_ADDR_BITS-1:0]	addr_in;

-

-	wire	[BUFFER_ADDR_BITS-1:0]	addr_in_max		= BUFFER_NUM_WORDS - 1;

-	wire	[BUFFER_ADDR_BITS-1:0]	addr_in_zero	= {BUFFER_ADDR_BITS{1'b0}};

-	wire	[BUFFER_ADDR_BITS-1:0]	addr_in_next	= (addr_in < addr_in_max) ?

-																		addr_in + 1'b1 : addr_in_zero;

-																		

-	reg	[BUFFER_ADDR_BITS-1:0]	addr_out;

-	

-	wire	[BUFFER_ADDR_BITS-1:0]	addr_out_max	= BUFFER_NUM_WORDS - 1;

-	wire	[BUFFER_ADDR_BITS-1:0]	addr_out_zero	= {BUFFER_ADDR_BITS{1'b0}};

-	wire	[BUFFER_ADDR_BITS-1:0]	addr_out_next	= (addr_out < addr_out_max) ?

-																		addr_out + 1'b1 : addr_out_zero;

-																		

-	assign s_addr					= addr_out;

-	assign u_addr					= addr_in;

-	assign v_addr					= addr_in;

-	

-	

-		//

-		// Ready Flag

-		//

-	assign rdy = (proc_cnt == proc_cnt_zero);

-	

-	

-		//

-		// Address Increment Logic

-		//

-	wire	inc_addr_in;

-	wire	inc_addr_out;

-

-	wire	[PROC_CNT_BITS-1:0]	cnt_inc_addr_in_start	= 1;

-	wire	[PROC_CNT_BITS-1:0]	cnt_inc_addr_in_stop		= BUFFER_NUM_WORDS;

-	

-	wire	[PROC_CNT_BITS-1:0]	cnt_inc_addr_out_start	= 2;

-	wire	[PROC_CNT_BITS-1:0]	cnt_inc_addr_out_stop	= BUFFER_NUM_WORDS + 1;

-

-	assign inc_addr_in  = (proc_cnt >= cnt_inc_addr_in_start)  && (proc_cnt <= cnt_inc_addr_in_stop);

-	assign inc_addr_out = (proc_cnt >= cnt_inc_addr_out_start) && (proc_cnt <= cnt_inc_addr_out_stop);

-	

-	always @(posedge clk) begin

-		//

-		if (inc_addr_in)	addr_in <= addr_in_next;

-		else					addr_in <= addr_in_zero;

-		//

-		if (inc_addr_out)	addr_out <= addr_out_next;

-		else					addr_out <= addr_out_zero;

-		//

-	end

-	

-		//

-		// Write Enable Logic

-		//

-	wire	wren_out;

-

-	wire	[PROC_CNT_BITS-1:0]	cnt_wren_out_start	= 2;

-	wire	[PROC_CNT_BITS-1:0]	cnt_wren_out_stop		= BUFFER_NUM_WORDS + 1;

-

-	assign wren_out = (proc_cnt >= cnt_wren_out_start) && (proc_cnt <= cnt_wren_out_stop);

-

-	assign s_wren = wren_out && !k_is_nul; //s_wren_allow && !v_eq_1 && !rdy;

-	

-	

-		//

-		// Data Logic

-		//

-	assign s_dout = s_is_odd ? v_din : u_din;

-

-		

-		//

-		// Primary Counter Logic

-		//

-	always @(posedge clk or negedge rst_n)

-		//

-		if (rst_n == 1'b0) proc_cnt <= proc_cnt_zero;

-		else begin

-			if (!rdy)		proc_cnt <= proc_cnt_next;

-			else if (ena)	proc_cnt <= proc_cnt_next;

-		end

-

-

-endmodule

+`timescale 1ns / 1ps
+
+module modinv_helper_reduce_update
+  (
+   clk, rst_n,
+   ena, rdy,
+
+   s_is_odd, k_is_nul,
+
+   s_addr, s_wren, s_dout,
+   u_addr,                 u_din,
+   v_addr,                 v_din
+   );
+
+
+   //
+   // Parameters
+   //
+   parameter BUFFER_NUM_WORDS		= 9;
+   parameter BUFFER_ADDR_BITS		= 4;
+
+
+   //
+   // clog2
+   //
+`include "../modinv_clog2.v"
+
+
+   //
+   // Constants
+   //
+   localparam PROC_NUM_CYCLES	= BUFFER_NUM_WORDS + 3;
+   localparam PROC_CNT_BITS	= clog2(PROC_NUM_CYCLES);
+
+
+   //
+   // Ports
+   //
+   input		wire									clk;
+   input		wire									rst_n;
+   input		wire									ena;
+   output	wire 										rdy;
+
+   input		wire									s_is_odd;
+   input		wire									k_is_nul;
+
+   output	wire [BUFFER_ADDR_BITS-1:0] 							s_addr;
+   output	wire [BUFFER_ADDR_BITS-1:0] 							u_addr;
+   output	wire [BUFFER_ADDR_BITS-1:0] 							v_addr;
+
+   output	wire 										s_wren;
+
+   output	wire [              32-1:0] 							s_dout;
+
+   input		wire [              32-1:0] 						u_din;
+   input		wire [              32-1:0] 						v_din;
+
+
+   //
+   // Counter
+   //
+   reg [PROC_CNT_BITS-1:0] 									proc_cnt;
+
+   wire [PROC_CNT_BITS-1:0] 									proc_cnt_max	= PROC_NUM_CYCLES - 1;
+   wire [PROC_CNT_BITS-1:0] 									proc_cnt_zero	= {PROC_CNT_BITS{1'b0}};
+   wire [PROC_CNT_BITS-1:0] 									proc_cnt_next	= (proc_cnt < proc_cnt_max) ?
+												proc_cnt + 1'b1 : proc_cnt_zero;
+
+   //
+   // Addresses
+   //
+   reg [BUFFER_ADDR_BITS-1:0] 									addr_in;
+
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_in_max		= BUFFER_NUM_WORDS - 1;
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_in_zero	= {BUFFER_ADDR_BITS{1'b0}};
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_in_next	= (addr_in < addr_in_max) ?
+												addr_in + 1'b1 : addr_in_zero;
+
+   reg [BUFFER_ADDR_BITS-1:0] 									addr_out;
+
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_out_max	= BUFFER_NUM_WORDS - 1;
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_out_zero	= {BUFFER_ADDR_BITS{1'b0}};
+   wire [BUFFER_ADDR_BITS-1:0] 									addr_out_next	= (addr_out < addr_out_max) ?
+												addr_out + 1'b1 : addr_out_zero;
+
+   assign s_addr					= addr_out;
+   assign u_addr					= addr_in;
+   assign v_addr					= addr_in;
+
+
+   //
+   // Ready Flag
+   //
+   assign rdy = (proc_cnt == proc_cnt_zero);
+
+
+   //
+   // Address Increment Logic
+   //
+   wire 											inc_addr_in;
+   wire 											inc_addr_out;
+
+   wire [PROC_CNT_BITS-1:0] 									cnt_inc_addr_in_start	= 1;
+   wire [PROC_CNT_BITS-1:0] 									cnt_inc_addr_in_stop		= BUFFER_NUM_WORDS;
+
+   wire [PROC_CNT_BITS-1:0] 									cnt_inc_addr_out_start	= 2;
+   wire [PROC_CNT_BITS-1:0] 									cnt_inc_addr_out_stop	= BUFFER_NUM_WORDS + 1;
+
+   assign inc_addr_in  = (proc_cnt >= cnt_inc_addr_in_start)  && (proc_cnt <= cnt_inc_addr_in_stop);
+   assign inc_addr_out = (proc_cnt >= cnt_inc_addr_out_start) && (proc_cnt <= cnt_inc_addr_out_stop);
+
+   always @(posedge clk) begin
+      //
+      if (inc_addr_in)	addr_in <= addr_in_next;
+      else					addr_in <= addr_in_zero;
+      //
+      if (inc_addr_out)	addr_out <= addr_out_next;
+      else					addr_out <= addr_out_zero;
+      //
+   end
+
+   //
+   // Write Enable Logic
+   //
+   wire	wren_out;
+
+   wire [PROC_CNT_BITS-1:0] cnt_wren_out_start	= 2;
+   wire [PROC_CNT_BITS-1:0] cnt_wren_out_stop		= BUFFER_NUM_WORDS + 1;
+
+   assign wren_out = (proc_cnt >= cnt_wren_out_start) && (proc_cnt <= cnt_wren_out_stop);
+
+   assign s_wren = wren_out && !k_is_nul; //s_wren_allow && !v_eq_1 && !rdy;
+
+
+   //
+   // Data Logic
+   //
+   assign s_dout = s_is_odd ? v_din : u_din;
+
+
+   //
+   // Primary Counter Logic
+   //
+   always @(posedge clk or negedge rst_n)
+     //
+     if (rst_n == 1'b0) proc_cnt <= proc_cnt_zero;
+     else begin
+	if (!rdy)		proc_cnt <= proc_cnt_next;
+	else if (ena)	proc_cnt <= proc_cnt_next;
+     end
+
+
+endmodule
diff --git a/rtl/modular/modular_invertor/modinv_clog2.v b/rtl/modular/modular_invertor/modinv_clog2.v
index 2f7b64d..04a7739 100644
--- a/rtl/modular/modular_invertor/modinv_clog2.v
+++ b/rtl/modular/modular_invertor/modinv_clog2.v
@@ -1,10 +1,10 @@
-function	integer clog2;

-	input	integer value;

-			integer result;

-	begin

-		value = value - 1;

-		for (result = 0; value > 0; result = result + 1)

-			value = value >> 1;

-		clog2 = result;

-	end

-endfunction

+function	integer clog2;
+   input	integer value;
+   integer 		result;
+   begin
+      value = value - 1;
+      for (result = 0; value > 0; result = result + 1)
+	value = value >> 1;
+      clog2 = result;
+   end
+endfunction
diff --git a/rtl/modular/modular_invertor/modular_invertor.v b/rtl/modular/modular_invertor/modular_invertor.v
index e9f2460..9fafa2d 100644
--- a/rtl/modular/modular_invertor/modular_invertor.v
+++ b/rtl/modular/modular_invertor/modular_invertor.v
@@ -2,7 +2,7 @@
 //
 // modular_invertor.v
 // -----------------------------------------------------------------------------
-// Modular invertor.

+// Modular invertor.
 //
 // Authors: Pavel Shatov
 //
@@ -34,948 +34,948 @@
 // ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 // POSSIBILITY OF SUCH DAMAGE.
 //
-//------------------------------------------------------------------------------

-

-module modular_invertor

-	(

-		clk, rst_n,

-		ena, rdy,

-		a_addr, q_addr, a1_addr, a1_wren,
-		a_din, q_din, a1_dout

-	);

-

-

-		//

-		// Parameters

-		//

-	parameter MAX_OPERAND_WIDTH = 256;

-	

-	

-		//

-		// clog2

-		//

-`include "modinv_clog2.v"

-

-

-		//

-		// More Parameters

-		//

-	localparam OPERAND_NUM_WORDS	= MAX_OPERAND_WIDTH / 32;

-	localparam OPERAND_ADDR_BITS	= clog2(OPERAND_NUM_WORDS);

-	

-	localparam BUFFER_NUM_WORDS	= OPERAND_NUM_WORDS + 1;

-	localparam BUFFER_ADDR_BITS	= clog2(BUFFER_NUM_WORDS);

-	

-	localparam LOOP_NUM_ROUNDS		= 2 * MAX_OPERAND_WIDTH;

-	localparam ROUND_COUNTER_BITS	= clog2(LOOP_NUM_ROUNDS);

-	

-	localparam K_NUM_BITS			= clog2(LOOP_NUM_ROUNDS + 1);

-	

-

-		//

-		// Ports

-		//
-	input		wire									clk;

-	input		wire									rst_n;

-	

-	input		wire									ena;

-	output	wire									rdy;

-	

-	output	wire	[OPERAND_ADDR_BITS-1:0]	a_addr;

-	output	reg	[OPERAND_ADDR_BITS-1:0]	q_addr;

-	output	wire	[OPERAND_ADDR_BITS-1:0]	a1_addr;

-	output	wire									a1_wren;

-	
-	input		wire	[32-1:0]						a_din;

-	input		wire	[32-1:0]						q_din;

-	output	wire	[32-1:0]						a1_dout;

-

-

-		//

-		// "Redundant" Power of 2 (K)

-		//

-	reg	[K_NUM_BITS-1:0]	k;

-

-	

-		//

-		// Buffers

-		//

-	reg	[BUFFER_ADDR_BITS-1:0]	buf_r_wr_addr;

-	reg	[BUFFER_ADDR_BITS-1:0]	buf_r_rd_addr;

-	reg									buf_r_wr_en;

-	reg	[              32-1:0]	buf_r_wr_din;

-	wire	[              32-1:0]	buf_r_wr_dout;

-	wire	[              32-1:0]	buf_r_rd_dout;

-

-	bram_1rw_1ro_readfirst #

-	(	.MEM_WIDTH(32), .MEM_ADDR_BITS(BUFFER_ADDR_BITS)
-	)

-	buf_r

-	(	.clk(clk),	
-		.a_addr(buf_r_wr_addr), .a_out(buf_r_wr_dout), .a_wr(buf_r_wr_en), .a_in(buf_r_wr_din),
-		.b_addr(buf_r_rd_addr), .b_out(buf_r_rd_dout)
-	);

-	

-	reg	[BUFFER_ADDR_BITS-1:0]	buf_s_wr_addr;

-	reg	[BUFFER_ADDR_BITS-1:0]	buf_s_rd_addr;

-	reg									buf_s_wr_en;

-	reg	[              32-1:0]	buf_s_wr_din;

-	wire	[              32-1:0]	buf_s_rd_dout;

-

-	bram_1rw_1ro_readfirst #

-	(	.MEM_WIDTH(32), .MEM_ADDR_BITS(BUFFER_ADDR_BITS)
-	)

-	buf_s

-	(	.clk(clk),	
-		.a_addr(buf_s_wr_addr), .a_out(),              .a_wr(buf_s_wr_en), .a_in(buf_s_wr_din),
-		.b_addr(buf_s_rd_addr), .b_out(buf_s_rd_dout)
-	);

-	

-	reg	[BUFFER_ADDR_BITS-1:0]	buf_u_wr_addr;

-	reg	[BUFFER_ADDR_BITS-1:0]	buf_u_rd_addr;

-	reg									buf_u_wr_en;

-	reg	[              32-1:0]	buf_u_wr_din;

-	wire	[              32-1:0]	buf_u_rd_dout;

-

-	bram_1rw_1ro_readfirst #

-	(	.MEM_WIDTH(32), .MEM_ADDR_BITS(BUFFER_ADDR_BITS)
-	)

-	buf_u

-	(	.clk(clk),	
-		.a_addr(buf_u_wr_addr), .a_out(),              .a_wr(buf_u_wr_en), .a_in(buf_u_wr_din),
-		.b_addr(buf_u_rd_addr), .b_out(buf_u_rd_dout)
-	);

-	

-	reg	[BUFFER_ADDR_BITS-1:0]	buf_v_wr_addr;

-	reg	[BUFFER_ADDR_BITS-1:0]	buf_v_rd_addr;

-	reg									buf_v_wr_en;

-	reg	[              32-1:0]	buf_v_wr_din;

-	wire	[              32-1:0]	buf_v_rd_dout;

-

-	bram_1rw_1ro_readfirst #

-	(	.MEM_WIDTH(32), .MEM_ADDR_BITS(BUFFER_ADDR_BITS)
-	)

-	buf_v

-	(	.clk(clk),	
-		.a_addr(buf_v_wr_addr), .a_out(),              .a_wr(buf_v_wr_en), .a_in(buf_v_wr_din),
-		.b_addr(buf_v_rd_addr), .b_out(buf_v_rd_dout)
-	);	

-

-	wire	[BUFFER_ADDR_BITS-1:0]	buf_r_dbl_wr_addr;

-	wire	[BUFFER_ADDR_BITS-1:0]	buf_r_dbl_rd_addr;

-	wire									buf_r_dbl_wr_en;

-	wire	[              32-1:0]	buf_r_dbl_wr_din;

-	wire	[              32-1:0]	buf_r_dbl_rd_dout;

-

-	bram_1rw_1ro_readfirst #

-	(	.MEM_WIDTH(32), .MEM_ADDR_BITS(BUFFER_ADDR_BITS)
-	)

-	buf_r_dbl

-	(	.clk(clk),	
-		.a_addr(buf_r_dbl_wr_addr), .a_out(),                  .a_wr(buf_r_dbl_wr_en), .a_in(buf_r_dbl_wr_din),
-		.b_addr(buf_r_dbl_rd_addr), .b_out(buf_r_dbl_rd_dout)
-	);

-	

-	wire	[BUFFER_ADDR_BITS-1:0]	buf_s_dbl_wr_addr;

-	wire	[BUFFER_ADDR_BITS-1:0]	buf_s_dbl_rd_addr;

-	wire									buf_s_dbl_wr_en;

-	wire	[              32-1:0]	buf_s_dbl_wr_din;

-	wire	[              32-1:0]	buf_s_dbl_rd_dout;

-

-	bram_1rw_1ro_readfirst #

-	(	.MEM_WIDTH(32), .MEM_ADDR_BITS(BUFFER_ADDR_BITS)
-	)

-	buf_s_dbl

-	(	.clk(clk),	
-		.a_addr(buf_s_dbl_wr_addr), .a_out(),                  .a_wr(buf_s_dbl_wr_en), .a_in(buf_s_dbl_wr_din),
-		.b_addr(buf_s_dbl_rd_addr), .b_out(buf_s_dbl_rd_dout)
-	);

-	

-	wire	[BUFFER_ADDR_BITS-1:0]	buf_r_plus_s_wr_addr;

-	wire	[BUFFER_ADDR_BITS-1:0]	buf_r_plus_s_rd_addr;

-	wire									buf_r_plus_s_wr_en;

-	wire	[              32-1:0]	buf_r_plus_s_wr_din;

-	wire	[              32-1:0]	buf_r_plus_s_rd_dout;

-

-	bram_1rw_1ro_readfirst #

-	(	.MEM_WIDTH(32), .MEM_ADDR_BITS(BUFFER_ADDR_BITS)
-	)

-	buf_r_plus_s

-	(	.clk(clk),	
-		.a_addr(buf_r_plus_s_wr_addr), .a_out(),                     .a_wr(buf_r_plus_s_wr_en), .a_in(buf_r_plus_s_wr_din),
-		.b_addr(buf_r_plus_s_rd_addr), .b_out(buf_r_plus_s_rd_dout)
-	);

-	

-	wire	[BUFFER_ADDR_BITS-1:0]	buf_u_minus_v_wr_addr;

-	wire	[BUFFER_ADDR_BITS-1:0]	buf_u_minus_v_rd_addr;

-	wire									buf_u_minus_v_wr_en;

-	wire	[              32-1:0]	buf_u_minus_v_wr_din;

-	wire	[              32-1:0]	buf_u_minus_v_wr_dout;

-

-	assign buf_u_minus_v_rd_addr = ~buf_u_minus_v_wr_addr;

-

-	bram_1rw_1ro_readfirst #

-	(	.MEM_WIDTH(32), .MEM_ADDR_BITS(BUFFER_ADDR_BITS)
-	)

-	buf_u_minus_v

-	(	.clk(clk),	
-		.a_addr(buf_u_minus_v_wr_addr), .a_out(buf_u_minus_v_wr_dout), .a_wr(buf_u_minus_v_wr_en), .a_in(buf_u_minus_v_wr_din),
-		.b_addr(buf_u_minus_v_rd_addr), .b_out()
-	);

-

-	wire	[BUFFER_ADDR_BITS-1:0]	buf_v_minus_u_wr_addr;

-	wire	[BUFFER_ADDR_BITS-1:0]	buf_v_minus_u_rd_addr;

-	wire									buf_v_minus_u_wr_en;

-	wire	[              32-1:0]	buf_v_minus_u_wr_din;

-	wire	[              32-1:0]	buf_v_minus_u_wr_dout;

-	

-	assign buf_v_minus_u_rd_addr = ~buf_v_minus_u_wr_addr;

-

-	bram_1rw_1ro_readfirst #

-	(	.MEM_WIDTH(32), .MEM_ADDR_BITS(BUFFER_ADDR_BITS)
-	)

-	buf_v_minus_u

-	(	.clk(clk),	
-		.a_addr(buf_v_minus_u_wr_addr), .a_out(buf_v_minus_u_wr_dout), .a_wr(buf_v_minus_u_wr_en), .a_in(buf_v_minus_u_wr_din),
-		.b_addr(buf_v_minus_u_rd_addr), .b_out()
-	);

-

-	wire	[BUFFER_ADDR_BITS-1:0]	buf_u_half_wr_addr;

-	wire	[BUFFER_ADDR_BITS-1:0]	buf_u_half_rd_addr;

-	wire									buf_u_half_wr_en;

-	wire	[              32-1:0]	buf_u_half_wr_din;

-	wire	[              32-1:0]	buf_u_half_rd_dout;

-

-	bram_1rw_1ro_readfirst #

-	(	.MEM_WIDTH(32), .MEM_ADDR_BITS(BUFFER_ADDR_BITS)
-	)

-	buf_u_half

-	(	.clk(clk),	
-		.a_addr(buf_u_half_wr_addr), .a_out(),                   .a_wr(buf_u_half_wr_en), .a_in(buf_u_half_wr_din),
-		.b_addr(buf_u_half_rd_addr), .b_out(buf_u_half_rd_dout)
-	);

-	

-	wire	[BUFFER_ADDR_BITS-1:0]	buf_v_half_wr_addr;

-	wire	[BUFFER_ADDR_BITS-1:0]	buf_v_half_rd_addr;

-	wire									buf_v_half_wr_en;

-	wire	[              32-1:0]	buf_v_half_wr_din;

-	wire	[              32-1:0]	buf_v_half_rd_dout;

-

-	bram_1rw_1ro_readfirst #

-	(	.MEM_WIDTH(32), .MEM_ADDR_BITS(BUFFER_ADDR_BITS)
-	)

-	buf_v_half

-	(	.clk(clk),	
-		.a_addr(buf_v_half_wr_addr), .a_out(),                   .a_wr(buf_v_half_wr_en), .a_in(buf_v_half_wr_din),
-		.b_addr(buf_v_half_rd_addr), .b_out(buf_v_half_rd_dout)
-	);

-	

-	wire	[BUFFER_ADDR_BITS-1:0]	buf_u_minus_v_half_wr_addr;

-	wire	[BUFFER_ADDR_BITS-1:0]	buf_u_minus_v_half_rd_addr;

-	wire									buf_u_minus_v_half_wr_en;

-	wire	[              32-1:0]	buf_u_minus_v_half_wr_din;

-	wire	[              32-1:0]	buf_u_minus_v_half_rd_dout;

-

-	bram_1rw_1ro_readfirst #

-	(	.MEM_WIDTH(32), .MEM_ADDR_BITS(BUFFER_ADDR_BITS)
-	)

-	buf_u_minus_v_half

-	(	.clk(clk),	
-		.a_addr(buf_u_minus_v_half_wr_addr), .a_out(),                           .a_wr(buf_u_minus_v_half_wr_en), .a_in(buf_u_minus_v_half_wr_din),
-		.b_addr(buf_u_minus_v_half_rd_addr), .b_out(buf_u_minus_v_half_rd_dout)
-	);

-

-	wire	[BUFFER_ADDR_BITS-1:0]	buf_v_minus_u_half_wr_addr;

-	wire	[BUFFER_ADDR_BITS-1:0]	buf_v_minus_u_half_rd_addr;

-	wire									buf_v_minus_u_half_wr_en;

-	wire	[              32-1:0]	buf_v_minus_u_half_wr_din;

-	wire	[              32-1:0]	buf_v_minus_u_half_rd_dout;

-

-	bram_1rw_1ro_readfirst #

-	(	.MEM_WIDTH(32), .MEM_ADDR_BITS(BUFFER_ADDR_BITS)
-	)

-	buf_v_minus_u_half

-	(	.clk(clk),	
-		.a_addr(buf_v_minus_u_half_wr_addr), .a_out(),                           .a_wr(buf_v_minus_u_half_wr_en), .a_in(buf_v_minus_u_half_wr_din),
-		.b_addr(buf_v_minus_u_half_rd_addr), .b_out(buf_v_minus_u_half_rd_dout)
-	);

-

-

-		//

-		// Helper Modules

-		//

-	wire helper_init_ena;

-	wire helper_invert_precalc_ena;

-	wire helper_invert_compare_ena;

-	wire helper_invert_update_ena;

-	wire helper_reduce_precalc_ena;

-	wire helper_reduce_update_ena;

-	wire helper_copy_ena;

-	

-	wire helper_init_rdy;

-	wire helper_invert_precalc_rdy;

-	wire helper_invert_compare_rdy;

-	wire helper_invert_update_rdy;

-	wire helper_reduce_precalc_rdy;

-	wire helper_reduce_update_rdy;

-	wire helper_copy_rdy;

-	

-	wire helper_init_done				= helper_init_rdy           && !helper_init_ena;

-	wire helper_invert_precalc_done	= helper_invert_precalc_rdy && !helper_invert_precalc_ena;

-	wire helper_invert_compare_done	= helper_invert_compare_rdy && !helper_invert_compare_ena;

-	wire helper_invert_update_done	= helper_invert_update_rdy  && !helper_invert_update_ena;

-	wire helper_reduce_precalc_done	= helper_reduce_precalc_rdy && !helper_reduce_precalc_ena;

-	wire helper_reduce_update_done	= helper_reduce_update_rdy  && !helper_reduce_update_ena;

-	wire helper_copy_done				= helper_copy_rdy           && !helper_copy_ena;

-	

-	

-		//

-		// Helper Module - Initialization

-		//

-	wire	[ BUFFER_ADDR_BITS-1:0]	helper_init_r_addr;

-	wire	[ BUFFER_ADDR_BITS-1:0]	helper_init_s_addr;

-	wire	[ BUFFER_ADDR_BITS-1:0]	helper_init_u_addr;

-	wire	[ BUFFER_ADDR_BITS-1:0]	helper_init_v_addr;

-	wire	[OPERAND_ADDR_BITS-1:0]	helper_init_q_addr;

-	

-	wire									helper_init_r_wren;

-	wire									helper_init_s_wren;

-	wire									helper_init_u_wren;

-	wire									helper_init_v_wren;

-	

-	wire	[              32-1:0]	helper_init_r_data;

-	wire	[              32-1:0]	helper_init_s_data;

-	wire	[              32-1:0]	helper_init_u_data;

-	wire	[              32-1:0]	helper_init_v_data;

-	

-	modinv_helper_init #

-	(

-		.OPERAND_NUM_WORDS	(OPERAND_NUM_WORDS),

-		.OPERAND_ADDR_BITS	(OPERAND_ADDR_BITS),

-	

-		.BUFFER_NUM_WORDS		(BUFFER_NUM_WORDS),

-		.BUFFER_ADDR_BITS		(BUFFER_ADDR_BITS)

-	)

-	helper_init

-	(

-		.clk 		(clk),

-		.rst_n	(rst_n),

-		

-		.ena 		(helper_init_ena),

-		.rdy 		(helper_init_rdy),

-		

-		.a_addr	(a_addr),

-		.q_addr	(helper_init_q_addr),

-		

-		.r_addr	(helper_init_r_addr),

-		.s_addr	(helper_init_s_addr),

-		.u_addr	(helper_init_u_addr),

-		.v_addr	(helper_init_v_addr),

-		

-		.q_din	(q_din),

-		.a_din	(a_din),

-		

-		.r_dout	(helper_init_r_data),

-		.s_dout	(helper_init_s_data),

-		.u_dout	(helper_init_u_data),

-		.v_dout	(helper_init_v_data),

-		

-		.r_wren	(helper_init_r_wren),

-		.s_wren	(helper_init_s_wren),

-		.u_wren	(helper_init_u_wren),

-		.v_wren	(helper_init_v_wren)

-	);

-	

-	

-		//

-		// Helper Module - Inversion Pre-Calculation

-		//

-	wire	[BUFFER_ADDR_BITS-1:0]	helper_invert_precalc_r_addr;

-	wire	[BUFFER_ADDR_BITS-1:0]	helper_invert_precalc_s_addr;

-	wire	[BUFFER_ADDR_BITS-1:0]	helper_invert_precalc_u_addr;

-	wire	[BUFFER_ADDR_BITS-1:0]	helper_invert_precalc_v_addr;

-	

-	modinv_helper_invert_precalc #

-	(

-		.BUFFER_NUM_WORDS		(BUFFER_NUM_WORDS),

-		.BUFFER_ADDR_BITS		(BUFFER_ADDR_BITS)

-	)

-	helper_invert_precalc

-	(

-		.clk 							(clk),

-		.rst_n						(rst_n),

-		

-		.ena 							(helper_invert_precalc_ena),

-		.rdy 							(helper_invert_precalc_rdy),

-		

-		.r_addr						(helper_invert_precalc_r_addr),

-		.s_addr						(helper_invert_precalc_s_addr),

-		.u_addr						(helper_invert_precalc_u_addr),

-		.v_addr						(helper_invert_precalc_v_addr),

-		

-		.r_din						(buf_r_rd_dout),

-		.s_din						(buf_s_rd_dout),

-		.u_din						(buf_u_rd_dout),

-		.v_din						(buf_v_rd_dout),

-		

-		.r_dbl_addr					(buf_r_dbl_wr_addr),

-		.s_dbl_addr					(buf_s_dbl_wr_addr),

-		.r_plus_s_addr				(buf_r_plus_s_wr_addr),

-		

-		.u_half_addr				(buf_u_half_wr_addr),

-		.v_half_addr				(buf_v_half_wr_addr),

-		.u_minus_v_addr			(buf_u_minus_v_wr_addr),

-		.v_minus_u_addr			(buf_v_minus_u_wr_addr),

-		.u_minus_v_half_addr		(buf_u_minus_v_half_wr_addr),

-		.v_minus_u_half_addr		(buf_v_minus_u_half_wr_addr),

-		

-		.r_dbl_dout					(buf_r_dbl_wr_din),

-		.s_dbl_dout					(buf_s_dbl_wr_din),

-		.r_plus_s_dout				(buf_r_plus_s_wr_din),

-		

-		.u_half_dout				(buf_u_half_wr_din),

-		.v_half_dout				(buf_v_half_wr_din),

-		.u_minus_v_dout			(buf_u_minus_v_wr_din),

-		.v_minus_u_dout			(buf_v_minus_u_wr_din),

-		.u_minus_v_half_dout		(buf_u_minus_v_half_wr_din),

-		.v_minus_u_half_dout		(buf_v_minus_u_half_wr_din),

-		

-		.r_dbl_wren					(buf_r_dbl_wr_en),

-		.s_dbl_wren					(buf_s_dbl_wr_en),

-		.r_plus_s_wren				(buf_r_plus_s_wr_en),

-		

-		.u_half_wren				(buf_u_half_wr_en),

-		.v_half_wren				(buf_v_half_wr_en),

-		.u_minus_v_wren			(buf_u_minus_v_wr_en),

-		.v_minus_u_wren			(buf_v_minus_u_wr_en),

-		.u_minus_v_half_wren		(buf_u_minus_v_half_wr_en),

-		.v_minus_u_half_wren		(buf_v_minus_u_half_wr_en),

-		

-		.u_minus_v_din				(buf_u_minus_v_wr_dout),

-		.v_minus_u_din				(buf_v_minus_u_wr_dout)

-	);

-	

-	

-		//

-		// Helper Module - Inversion Comparison

-		//

-	wire	[BUFFER_ADDR_BITS-1:0]	helper_invert_compare_u_addr;

-	wire	[BUFFER_ADDR_BITS-1:0]	helper_invert_compare_v_addr;

-

-	wire	flag_invert_u_gt_v;

-	wire	flag_invert_v_eq_1;
-	wire	flag_invert_u_is_even;

-	wire	flag_invert_v_is_even;

-

-	modinv_helper_invert_compare #

-	(

-		.BUFFER_NUM_WORDS		(BUFFER_NUM_WORDS),

-		.BUFFER_ADDR_BITS		(BUFFER_ADDR_BITS)

-	)

-	helper_invert_compare

-	(

-		.clk 			(clk),

-		.rst_n		(rst_n),

-		

-		.ena 			(helper_invert_compare_ena),

-		.rdy 			(helper_invert_compare_rdy),

-				

-		.u_addr		(helper_invert_compare_u_addr),

-		.v_addr		(helper_invert_compare_v_addr),

-		

-		.u_din		(buf_u_rd_dout),

-		.v_din		(buf_v_rd_dout),

-		

-		.u_gt_v		(flag_invert_u_gt_v),

-		.v_eq_1		(flag_invert_v_eq_1),
-		.u_is_even	(flag_invert_u_is_even),

-		.v_is_even	(flag_invert_v_is_even)

-	);

-	

-		

-		//

-		// Helper Module - Inversion Update

-		//

-	wire	[BUFFER_ADDR_BITS-1:0]	helper_invert_update_r_addr;

-	wire	[BUFFER_ADDR_BITS-1:0]	helper_invert_update_s_addr;

-	wire	[BUFFER_ADDR_BITS-1:0]	helper_invert_update_u_addr;

-	wire	[BUFFER_ADDR_BITS-1:0]	helper_invert_update_v_addr;

-	

-	wire									helper_invert_update_r_wren;

-	wire									helper_invert_update_s_wren;

-	wire									helper_invert_update_u_wren;

-	wire									helper_invert_update_v_wren;

-	

-	wire	[              32-1:0]	helper_invert_update_r_data;

-	wire	[              32-1:0]	helper_invert_update_s_data;

-	wire	[              32-1:0]	helper_invert_update_u_data;

-	wire	[              32-1:0]	helper_invert_update_v_data;

-	

-	modinv_helper_invert_update #

-	(

-		.BUFFER_NUM_WORDS		(BUFFER_NUM_WORDS),

-		.BUFFER_ADDR_BITS		(BUFFER_ADDR_BITS)

-	)

-	helper_invert_update

-	(

-		.clk 							(clk),

-		.rst_n						(rst_n),

-		

-		.ena 							(helper_invert_update_ena),

-		.rdy 							(helper_invert_update_rdy),

-		

-		.u_gt_v						(flag_invert_u_gt_v),

-		.v_eq_1						(flag_invert_v_eq_1),
-		.u_is_even					(flag_invert_u_is_even),

-		.v_is_even					(flag_invert_v_is_even),

-		

-		.r_addr						(helper_invert_update_r_addr),

-		.s_addr						(helper_invert_update_s_addr),

-		.u_addr						(helper_invert_update_u_addr),

-		.v_addr						(helper_invert_update_v_addr),

-		

-		.r_wren						(helper_invert_update_r_wren),

-		.s_wren						(helper_invert_update_s_wren),

-		.u_wren						(helper_invert_update_u_wren),

-		.v_wren						(helper_invert_update_v_wren),

-		

-		.r_dout						(helper_invert_update_r_data),

-		.s_dout						(helper_invert_update_s_data),

-		.u_dout						(helper_invert_update_u_data),

-		.v_dout						(helper_invert_update_v_data),

-		

-		.r_dbl_addr					(buf_r_dbl_rd_addr),

-		.s_dbl_addr					(buf_s_dbl_rd_addr),

-		.r_plus_s_addr				(buf_r_plus_s_rd_addr),

-		.u_half_addr				(buf_u_half_rd_addr),

-		.v_half_addr				(buf_v_half_rd_addr),

-		.u_minus_v_half_addr		(buf_u_minus_v_half_rd_addr),

-		.v_minus_u_half_addr		(buf_v_minus_u_half_rd_addr),

-		

-		.r_dbl_din					(buf_r_dbl_rd_dout),

-		.s_dbl_din					(buf_s_dbl_rd_dout),

-		.r_plus_s_din				(buf_r_plus_s_rd_dout),

-		.u_half_din					(buf_u_half_rd_dout),

-		.v_half_din					(buf_v_half_rd_dout),

-		.u_minus_v_half_din		(buf_u_minus_v_half_rd_dout),

-		.v_minus_u_half_din		(buf_v_minus_u_half_rd_dout)

-	);

-	

-	

-		//

-		// Helper Module - Reduction Pre-Calculation

-		//

-	wire	[ BUFFER_ADDR_BITS-1:0]	helper_reduce_precalc_r_addr;

-	wire	[ BUFFER_ADDR_BITS-1:0]	helper_reduce_precalc_s_addr;

-	wire	[ BUFFER_ADDR_BITS-1:0]	helper_reduce_precalc_u_addr;

-	wire	[ BUFFER_ADDR_BITS-1:0]	helper_reduce_precalc_v_addr;

-	wire	[OPERAND_ADDR_BITS-1:0]	helper_reduce_precalc_q_addr;

-	

-	wire									helper_reduce_precalc_r_wren;

-	wire									helper_reduce_precalc_u_wren;

-	wire									helper_reduce_precalc_v_wren;

-	

-	wire	[              32-1:0]	helper_reduce_precalc_r_data;

-	wire	[              32-1:0]	helper_reduce_precalc_u_data;

-	wire	[              32-1:0]	helper_reduce_precalc_v_data;

-

-	wire	flag_reduce_s_is_odd;

-	wire	flag_invert_k_is_nul;
-	

-	modinv_helper_reduce_precalc #

-	(

-		.OPERAND_NUM_WORDS	(OPERAND_NUM_WORDS),

-		.OPERAND_ADDR_BITS	(OPERAND_ADDR_BITS),

-		.BUFFER_NUM_WORDS		(BUFFER_NUM_WORDS),

-		.BUFFER_ADDR_BITS		(BUFFER_ADDR_BITS),

-		.K_NUM_BITS				(K_NUM_BITS)

-	)

-	helper_reduce_precalc

-	(

-		.clk 			(clk),

-		.rst_n		(rst_n),

-		

-		.ena 			(helper_reduce_precalc_ena),

-		.rdy 			(helper_reduce_precalc_rdy),

-		

-		.r_addr		(helper_reduce_precalc_r_addr),

-		.s_addr		(helper_reduce_precalc_s_addr),

-		.u_addr		(helper_reduce_precalc_u_addr),

-		.v_addr		(helper_reduce_precalc_v_addr),

-		.q_addr		(helper_reduce_precalc_q_addr),

-		

-		.k				(k),

-		

-		.s_is_odd	(flag_reduce_s_is_odd),

-		.k_is_nul	(flag_reduce_k_is_nul),

-		

-		.r_din		(buf_r_wr_dout),

-		.s_din		(buf_s_rd_dout),

-		.q_din		(q_din),

-		

-		.r_wren		(helper_reduce_precalc_r_wren),

-		.u_wren		(helper_reduce_precalc_u_wren),

-		.v_wren		(helper_reduce_precalc_v_wren),

-		

-		.r_dout		(helper_reduce_precalc_r_data),

-		.u_dout		(helper_reduce_precalc_u_data),

-		.v_dout		(helper_reduce_precalc_v_data)

-	);

-	

-		//

-		// Helper Module - Reduction Update

-		//

-	wire	[BUFFER_ADDR_BITS-1:0]	helper_reduce_update_s_addr;

-	wire	[BUFFER_ADDR_BITS-1:0]	helper_reduce_update_u_addr;

-	wire	[BUFFER_ADDR_BITS-1:0]	helper_reduce_update_v_addr;

-	

-	wire									helper_reduce_update_s_wren;

-	

-	wire	[              32-1:0]	helper_reduce_update_s_data;

-	

-	modinv_helper_reduce_update #

-	(

-		.BUFFER_NUM_WORDS		(BUFFER_NUM_WORDS),

-		.BUFFER_ADDR_BITS		(BUFFER_ADDR_BITS)

-	)

-	helper_reduce_update

-	(

-		.clk 							(clk),

-		.rst_n						(rst_n),

-		

-		.ena 							(helper_reduce_update_ena),

-		.rdy 							(helper_reduce_update_rdy),

-		

-		.s_is_odd					(flag_reduce_s_is_odd),

-		.k_is_nul					(flag_reduce_k_is_nul),

-		

-		.s_addr						(helper_reduce_update_s_addr),

-		.u_addr						(helper_reduce_update_u_addr),

-		.v_addr						(helper_reduce_update_v_addr),

-		

-		.s_wren						(helper_reduce_update_s_wren),

-		

-		.s_dout						(helper_reduce_update_s_data),

-				

-		.u_din						(buf_u_rd_dout),

-		.v_din						(buf_v_rd_dout)

-	);

-	

-	

-		//

-		// Helper Module - Copying

-		//

-	wire	[BUFFER_ADDR_BITS-1:0]	helper_copy_s_addr;

-		

-	modinv_helper_copy #

-	(

-		.OPERAND_NUM_WORDS	(OPERAND_NUM_WORDS),

-		.OPERAND_ADDR_BITS	(OPERAND_ADDR_BITS),

-	

-		.BUFFER_NUM_WORDS		(BUFFER_NUM_WORDS),

-		.BUFFER_ADDR_BITS		(BUFFER_ADDR_BITS)

-	)

-	helper_copy

-	(

-		.clk 		(clk),

-		.rst_n	(rst_n),

-		

-		.ena 		(helper_copy_ena),

-		.rdy 		(helper_copy_rdy),

-		

-		.s_addr	(helper_copy_s_addr),

-		.a1_addr	(a1_addr),

-		

-		.s_din	(buf_s_rd_dout),

-		

-		.a1_dout	(a1_dout),

-		

-		.a1_wren	(a1_wren)

-	);

-	

-	

-		//

-		// Round Counter

-		//

-	reg	[ROUND_COUNTER_BITS-1:0]	round_counter;

-	wire	[ROUND_COUNTER_BITS-1:0]	round_counter_max = LOOP_NUM_ROUNDS - 1;

-	wire	[ROUND_COUNTER_BITS-1:0]	round_counter_zero = {ROUND_COUNTER_BITS{1'b0}};

-	wire	[ROUND_COUNTER_BITS-1:0]	round_counter_next =

-		(round_counter < round_counter_max) ? round_counter + 1'b1 : round_counter_zero;

-

-	

-		//

-		// FSM

-		//

-	localparam FSM_STATE_IDLE				= 4'd0;

-	

-	localparam FSM_STATE_INIT				= 4'd1;

-	

-	localparam FSM_STATE_INVERT_PRECALC	= 4'd11;

-	localparam FSM_STATE_INVERT_COMPARE	= 4'd12;

-	localparam FSM_STATE_INVERT_UPDATE	= 4'd13;

-	

-	localparam FSM_STATE_REDUCE_PRECALC	= 4'd14;

-	localparam FSM_STATE_REDUCE_UPDATE	= 4'd15;

-	

-	localparam FSM_STATE_COPY				= 4'd2;

-	

-	localparam FSM_STATE_DONE				= 4'd3;

-	

-	reg [3:0] fsm_state = FSM_STATE_IDLE;

-	reg [3:0] fsm_state_dly = FSM_STATE_IDLE;

-	

-	wire fsm_state_new = (fsm_state != fsm_state_dly);

-

-	wire [3:0] fsm_state_invert_next = (round_counter < round_counter_max) ?

-		FSM_STATE_INVERT_PRECALC : FSM_STATE_REDUCE_PRECALC;

-		

-	wire [3:0] fsm_state_reduce_next = (round_counter < round_counter_max) ?

-		FSM_STATE_REDUCE_PRECALC : FSM_STATE_COPY;

-	
-	always @(posedge clk or negedge rst_n)
-		//
-		if (rst_n == 1'b0) fsm_state <= FSM_STATE_IDLE;
-		else case (fsm_state)

-			FSM_STATE_IDLE:				fsm_state <= ena                        ? FSM_STATE_INIT           : FSM_STATE_IDLE;

-			FSM_STATE_INIT:				fsm_state <= helper_init_done           ? FSM_STATE_INVERT_PRECALC : FSM_STATE_INIT;

-			FSM_STATE_INVERT_PRECALC:	fsm_state <= helper_invert_precalc_done ? FSM_STATE_INVERT_COMPARE : FSM_STATE_INVERT_PRECALC;

-			FSM_STATE_INVERT_COMPARE:	fsm_state <= helper_invert_compare_done ? FSM_STATE_INVERT_UPDATE  : FSM_STATE_INVERT_COMPARE;

-			FSM_STATE_INVERT_UPDATE:	fsm_state <= helper_invert_update_done  ? fsm_state_invert_next    : FSM_STATE_INVERT_UPDATE;

-			FSM_STATE_REDUCE_PRECALC:	fsm_state <= helper_reduce_precalc_done ? FSM_STATE_REDUCE_UPDATE  : FSM_STATE_REDUCE_PRECALC;

-			FSM_STATE_REDUCE_UPDATE:	fsm_state <= helper_reduce_update_done  ? fsm_state_reduce_next    : FSM_STATE_REDUCE_UPDATE;

-			FSM_STATE_COPY:				fsm_state <= helper_copy_done           ? FSM_STATE_DONE           : FSM_STATE_COPY;

-			FSM_STATE_DONE:				fsm_state <= FSM_STATE_IDLE;

-			default:							fsm_state <= FSM_STATE_IDLE;
-		endcase

-		

-	always @(posedge clk or negedge rst_n)
-		//
-		if (rst_n == 1'b0)	fsm_state_dly <= FSM_STATE_IDLE;
-		else						fsm_state_dly <= fsm_state;

-

-

-	assign helper_init_ena				= (fsm_state == FSM_STATE_INIT)           && fsm_state_new;

-	assign helper_invert_precalc_ena	= (fsm_state == FSM_STATE_INVERT_PRECALC) && fsm_state_new;

-	assign helper_invert_compare_ena	= (fsm_state == FSM_STATE_INVERT_COMPARE) && fsm_state_new;

-	assign helper_invert_update_ena	= (fsm_state == FSM_STATE_INVERT_UPDATE)  && fsm_state_new;

-	assign helper_reduce_precalc_ena	= (fsm_state == FSM_STATE_REDUCE_PRECALC) && fsm_state_new;

-	assign helper_reduce_update_ena	= (fsm_state == FSM_STATE_REDUCE_UPDATE)  && fsm_state_new;

-	assign helper_copy_ena				= (fsm_state == FSM_STATE_COPY)           && fsm_state_new;

-	

-	

-		//

-		// Counter Increment

-		//
-	always @(posedge clk) begin

-		//

-		if ((fsm_state == FSM_STATE_INIT) && helper_init_done)

-			round_counter <= round_counter_zero;

-		//	

-		if ((fsm_state == FSM_STATE_INVERT_UPDATE) && helper_invert_update_done)

-			round_counter <= round_counter_next;

-		//

-		if ((fsm_state == FSM_STATE_REDUCE_UPDATE) && helper_reduce_update_done)

-			round_counter <= round_counter_next;

-		//

-	end

-		

-		

-		//

-		// Q Address Selector

-		//

-	always @(*) begin

-		//

-		case (fsm_state)

-			FSM_STATE_INIT:				q_addr = helper_init_q_addr;

-			FSM_STATE_REDUCE_PRECALC:	q_addr = helper_reduce_precalc_q_addr;

-			default:							q_addr = {OPERAND_ADDR_BITS{1'bX}};

-		endcase

-		//

-	end

-	

-	

-		//

-		// Buffer Address Selector

-		//

-	always @(*) begin

-		//

-		// Write Ports

-		//

-		case (fsm_state)

-			FSM_STATE_INIT:				buf_r_wr_addr = helper_init_r_addr;

-			FSM_STATE_INVERT_UPDATE:	buf_r_wr_addr = helper_invert_update_r_addr;

-			FSM_STATE_REDUCE_PRECALC:	buf_r_wr_addr = helper_reduce_precalc_r_addr;

-			default:							buf_r_wr_addr = {BUFFER_ADDR_BITS{1'bX}};

-		endcase

-		//

-		case (fsm_state)

-			FSM_STATE_INIT:				buf_s_wr_addr = helper_init_s_addr;

-			FSM_STATE_INVERT_UPDATE:	buf_s_wr_addr = helper_invert_update_s_addr;

-			FSM_STATE_REDUCE_UPDATE:	buf_s_wr_addr = helper_reduce_update_s_addr;

-			default:							buf_s_wr_addr = {BUFFER_ADDR_BITS{1'bX}};

-		endcase

-		//

-		case (fsm_state)

-			FSM_STATE_INIT:				buf_u_wr_addr = helper_init_u_addr;

-			FSM_STATE_INVERT_UPDATE:	buf_u_wr_addr = helper_invert_update_u_addr;

-			FSM_STATE_REDUCE_PRECALC:	buf_u_wr_addr = helper_reduce_precalc_u_addr;

-			default:							buf_u_wr_addr = {BUFFER_ADDR_BITS{1'bX}};

-		endcase

-		//

-		case (fsm_state)

-			FSM_STATE_INIT:				buf_v_wr_addr = helper_init_v_addr;

-			FSM_STATE_INVERT_UPDATE:	buf_v_wr_addr = helper_invert_update_v_addr;

-			FSM_STATE_REDUCE_PRECALC:	buf_v_wr_addr = helper_reduce_precalc_v_addr;

-			default:							buf_v_wr_addr = {BUFFER_ADDR_BITS{1'bX}};

-		endcase

-		//

-		// Read Ports

-		//

-		case (fsm_state)

-			FSM_STATE_INVERT_PRECALC:	buf_r_rd_addr = helper_invert_precalc_r_addr;

-			default:							buf_r_rd_addr = {BUFFER_ADDR_BITS{1'bX}};

-		endcase

-		//

-		case (fsm_state)

-			FSM_STATE_INVERT_PRECALC:	buf_s_rd_addr = helper_invert_precalc_s_addr;

-			FSM_STATE_REDUCE_PRECALC:	buf_s_rd_addr = helper_reduce_precalc_s_addr;

-			FSM_STATE_COPY:				buf_s_rd_addr = helper_copy_s_addr;

-			default:							buf_s_rd_addr = {BUFFER_ADDR_BITS{1'bX}};

-		endcase

-		//

-		case (fsm_state)

-			FSM_STATE_INVERT_PRECALC:	buf_u_rd_addr = helper_invert_precalc_u_addr;

-			FSM_STATE_INVERT_COMPARE:	buf_u_rd_addr = helper_invert_compare_u_addr;

-			FSM_STATE_REDUCE_UPDATE:	buf_u_rd_addr = helper_reduce_update_u_addr;

-			default:							buf_u_rd_addr = {BUFFER_ADDR_BITS{1'bX}};

-		endcase

-		//

-		case (fsm_state)

-			FSM_STATE_INVERT_PRECALC:	buf_v_rd_addr = helper_invert_precalc_v_addr;

-			FSM_STATE_INVERT_COMPARE:	buf_v_rd_addr = helper_invert_compare_v_addr;

-			FSM_STATE_REDUCE_UPDATE:	buf_v_rd_addr = helper_reduce_update_v_addr;

-			default:							buf_v_rd_addr = {BUFFER_ADDR_BITS{1'bX}};

-		endcase

-		//

-	end

-	

-	

-		//

-		// Buffer Write Enable Logic

-		//

-	always @(*) begin

-		//

-		// Write Ports

-		//

-		case (fsm_state)

-			FSM_STATE_INIT:				buf_r_wr_en  = helper_init_r_wren;

-			FSM_STATE_INVERT_UPDATE:	buf_r_wr_en = helper_invert_update_r_wren;

-			FSM_STATE_REDUCE_PRECALC:	buf_r_wr_en = helper_reduce_precalc_r_wren;

-			default:							buf_r_wr_en = 1'b0;

-		endcase

-		//

-		case (fsm_state)

-			FSM_STATE_INIT:				buf_s_wr_en = helper_init_s_wren;

-			FSM_STATE_INVERT_UPDATE:	buf_s_wr_en = helper_invert_update_s_wren;

-			FSM_STATE_REDUCE_UPDATE:	buf_s_wr_en = helper_reduce_update_s_wren;

-			default:							buf_s_wr_en = 1'b0;

-		endcase

-		//

-		case (fsm_state)

-			FSM_STATE_INIT:				buf_u_wr_en = helper_init_u_wren;

-			FSM_STATE_INVERT_UPDATE:	buf_u_wr_en = helper_invert_update_u_wren;

-			FSM_STATE_REDUCE_PRECALC:	buf_u_wr_en = helper_reduce_precalc_u_wren;

-			default:							buf_u_wr_en = 1'b0;

-		endcase

-		//

-		case (fsm_state)

-			FSM_STATE_INIT:				buf_v_wr_en = helper_init_v_wren;

-			FSM_STATE_INVERT_UPDATE:	buf_v_wr_en = helper_invert_update_v_wren;

-			FSM_STATE_REDUCE_PRECALC:	buf_v_wr_en = helper_reduce_precalc_v_wren;

-			default:							buf_v_wr_en = 1'b0;

-		endcase

-		//

-	end

-	

-	

-		//

-		// Buffer Write Data Selector

-		//

-	always @(*) begin

-		//

-		case (fsm_state)

-			FSM_STATE_INIT:				buf_r_wr_din = helper_init_r_data;

-			FSM_STATE_INVERT_UPDATE:	buf_r_wr_din = helper_invert_update_r_data;

-			FSM_STATE_REDUCE_PRECALC:	buf_r_wr_din = helper_reduce_precalc_r_data;

-			default:							buf_r_wr_din = {32{1'bX}};

-		endcase

-		//

-		case (fsm_state)

-			FSM_STATE_INIT:				buf_s_wr_din = helper_init_s_data;

-			FSM_STATE_INVERT_UPDATE:	buf_s_wr_din = helper_invert_update_s_data;

-			FSM_STATE_REDUCE_UPDATE:	buf_s_wr_din = helper_reduce_update_s_data;

-			default:							buf_s_wr_din = {32{1'bX}};

-		endcase

-		//

-		case (fsm_state)

-			FSM_STATE_INIT:				buf_u_wr_din = helper_init_u_data;

-			FSM_STATE_INVERT_UPDATE:	buf_u_wr_din = helper_invert_update_u_data;

-			FSM_STATE_REDUCE_PRECALC:	buf_u_wr_din = helper_reduce_precalc_u_data;

-			default:							buf_u_wr_din = {32{1'bX}};

-		endcase

-		//

-		case (fsm_state)

-			FSM_STATE_INIT:				buf_v_wr_din = helper_init_v_data;

-			FSM_STATE_INVERT_UPDATE:	buf_v_wr_din = helper_invert_update_v_data;

-			FSM_STATE_REDUCE_PRECALC:	buf_v_wr_din = helper_reduce_precalc_v_data;

-			default:							buf_v_wr_din = {32{1'bX}};

-		endcase

-		//

-	end

-	

-	

-		//

-		// Ready Logic

-		//

-	reg rdy_reg = 1'b1;

-

-	assign rdy = rdy_reg;

-	

-	always @(posedge clk or negedge rst_n)

-		//

-		if (rst_n == 1'b0) rdy_reg <= 1'b1;

-		else begin

-		

-				/* clear */

-			if (rdy && ena) rdy_reg <= 1'b0;

-			

-				/* set */

-			if (!rdy && (fsm_state == FSM_STATE_DONE)) rdy_reg <= 1'b1;

-			

-		end

-	

-		

-		//

-		// Store Redundant Power of 2 (K)

-		//

-	always @(posedge clk)

-		//

-		if (helper_init_ena)

-			k <= {K_NUM_BITS{1'b0}};

-		else begin

-		

-			if (helper_invert_update_ena && !flag_invert_v_eq_1)

-				k <= k + 1'b1;

-				

-			if (helper_reduce_update_ena && (k != {K_NUM_BITS{1'b0}}))

-				k <= k - 1'b1;

-				

-		end

-	

-endmodule

-

-

+//------------------------------------------------------------------------------
+
+module modular_invertor
+  (
+   clk, rst_n,
+   ena, rdy,
+   a_addr, q_addr, a1_addr, a1_wren,
+   a_din, q_din, a1_dout
+   );
+
+
+   //
+   // Parameters
+   //
+   parameter MAX_OPERAND_WIDTH = 256;
+
+
+   //
+   // clog2
+   //
+`include "modinv_clog2.v"
+
+
+   //
+   // More Parameters
+   //
+   localparam OPERAND_NUM_WORDS	= MAX_OPERAND_WIDTH / 32;
+   localparam OPERAND_ADDR_BITS	= clog2(OPERAND_NUM_WORDS);
+
+   localparam BUFFER_NUM_WORDS	= OPERAND_NUM_WORDS + 1;
+   localparam BUFFER_ADDR_BITS	= clog2(BUFFER_NUM_WORDS);
+
+   localparam LOOP_NUM_ROUNDS		= 2 * MAX_OPERAND_WIDTH;
+   localparam ROUND_COUNTER_BITS	= clog2(LOOP_NUM_ROUNDS);
+
+   localparam K_NUM_BITS			= clog2(LOOP_NUM_ROUNDS + 1);
+
+
+   //
+   // Ports
+   //
+   input		wire									clk;
+   input		wire									rst_n;
+
+   input		wire									ena;
+   output	wire 										rdy;
+
+   output	wire [OPERAND_ADDR_BITS-1:0] 							a_addr;
+   output	reg [OPERAND_ADDR_BITS-1:0] 							q_addr;
+   output	wire [OPERAND_ADDR_BITS-1:0] 							a1_addr;
+   output	wire 										a1_wren;
+
+   input		wire [32-1:0] 								a_din;
+   input		wire [32-1:0] 								q_din;
+   output	wire [32-1:0] 									a1_dout;
+
+
+   //
+   // "Redundant" Power of 2 (K)
+   //
+   reg [K_NUM_BITS-1:0] 									k;
+
+
+   //
+   // Buffers
+   //
+   reg [BUFFER_ADDR_BITS-1:0] 									buf_r_wr_addr;
+   reg [BUFFER_ADDR_BITS-1:0] 									buf_r_rd_addr;
+   reg 												buf_r_wr_en;
+   reg [              32-1:0] 									buf_r_wr_din;
+   wire [              32-1:0] 									buf_r_wr_dout;
+   wire [              32-1:0] 									buf_r_rd_dout;
+
+   bram_1rw_1ro_readfirst #
+     (	.MEM_WIDTH(32), .MEM_ADDR_BITS(BUFFER_ADDR_BITS)
+	)
+   buf_r
+     (	.clk(clk),
+	.a_addr(buf_r_wr_addr), .a_out(buf_r_wr_dout), .a_wr(buf_r_wr_en), .a_in(buf_r_wr_din),
+	.b_addr(buf_r_rd_addr), .b_out(buf_r_rd_dout)
+	);
+
+   reg [BUFFER_ADDR_BITS-1:0] 									buf_s_wr_addr;
+   reg [BUFFER_ADDR_BITS-1:0] 									buf_s_rd_addr;
+   reg 												buf_s_wr_en;
+   reg [              32-1:0] 									buf_s_wr_din;
+   wire [              32-1:0] 									buf_s_rd_dout;
+
+   bram_1rw_1ro_readfirst #
+     (	.MEM_WIDTH(32), .MEM_ADDR_BITS(BUFFER_ADDR_BITS)
+	)
+   buf_s
+     (	.clk(clk),
+	.a_addr(buf_s_wr_addr), .a_out(),              .a_wr(buf_s_wr_en), .a_in(buf_s_wr_din),
+	.b_addr(buf_s_rd_addr), .b_out(buf_s_rd_dout)
+	);
+
+   reg [BUFFER_ADDR_BITS-1:0] 									buf_u_wr_addr;
+   reg [BUFFER_ADDR_BITS-1:0] 									buf_u_rd_addr;
+   reg 												buf_u_wr_en;
+   reg [              32-1:0] 									buf_u_wr_din;
+   wire [              32-1:0] 									buf_u_rd_dout;
+
+   bram_1rw_1ro_readfirst #
+     (	.MEM_WIDTH(32), .MEM_ADDR_BITS(BUFFER_ADDR_BITS)
+	)
+   buf_u
+     (	.clk(clk),
+	.a_addr(buf_u_wr_addr), .a_out(),              .a_wr(buf_u_wr_en), .a_in(buf_u_wr_din),
+	.b_addr(buf_u_rd_addr), .b_out(buf_u_rd_dout)
+	);
+
+   reg [BUFFER_ADDR_BITS-1:0] 									buf_v_wr_addr;
+   reg [BUFFER_ADDR_BITS-1:0] 									buf_v_rd_addr;
+   reg 												buf_v_wr_en;
+   reg [              32-1:0] 									buf_v_wr_din;
+   wire [              32-1:0] 									buf_v_rd_dout;
+
+   bram_1rw_1ro_readfirst #
+     (	.MEM_WIDTH(32), .MEM_ADDR_BITS(BUFFER_ADDR_BITS)
+	)
+   buf_v
+     (	.clk(clk),
+	.a_addr(buf_v_wr_addr), .a_out(),              .a_wr(buf_v_wr_en), .a_in(buf_v_wr_din),
+	.b_addr(buf_v_rd_addr), .b_out(buf_v_rd_dout)
+	);
+
+   wire [BUFFER_ADDR_BITS-1:0] 									buf_r_dbl_wr_addr;
+   wire [BUFFER_ADDR_BITS-1:0] 									buf_r_dbl_rd_addr;
+   wire 											buf_r_dbl_wr_en;
+   wire [              32-1:0] 									buf_r_dbl_wr_din;
+   wire [              32-1:0] 									buf_r_dbl_rd_dout;
+
+   bram_1rw_1ro_readfirst #
+     (	.MEM_WIDTH(32), .MEM_ADDR_BITS(BUFFER_ADDR_BITS)
+	)
+   buf_r_dbl
+     (	.clk(clk),
+	.a_addr(buf_r_dbl_wr_addr), .a_out(),                  .a_wr(buf_r_dbl_wr_en), .a_in(buf_r_dbl_wr_din),
+	.b_addr(buf_r_dbl_rd_addr), .b_out(buf_r_dbl_rd_dout)
+	);
+
+   wire [BUFFER_ADDR_BITS-1:0] 									buf_s_dbl_wr_addr;
+   wire [BUFFER_ADDR_BITS-1:0] 									buf_s_dbl_rd_addr;
+   wire 											buf_s_dbl_wr_en;
+   wire [              32-1:0] 									buf_s_dbl_wr_din;
+   wire [              32-1:0] 									buf_s_dbl_rd_dout;
+
+   bram_1rw_1ro_readfirst #
+     (	.MEM_WIDTH(32), .MEM_ADDR_BITS(BUFFER_ADDR_BITS)
+	)
+   buf_s_dbl
+     (	.clk(clk),
+	.a_addr(buf_s_dbl_wr_addr), .a_out(),                  .a_wr(buf_s_dbl_wr_en), .a_in(buf_s_dbl_wr_din),
+	.b_addr(buf_s_dbl_rd_addr), .b_out(buf_s_dbl_rd_dout)
+	);
+
+   wire [BUFFER_ADDR_BITS-1:0] 									buf_r_plus_s_wr_addr;
+   wire [BUFFER_ADDR_BITS-1:0] 									buf_r_plus_s_rd_addr;
+   wire 											buf_r_plus_s_wr_en;
+   wire [              32-1:0] 									buf_r_plus_s_wr_din;
+   wire [              32-1:0] 									buf_r_plus_s_rd_dout;
+
+   bram_1rw_1ro_readfirst #
+     (	.MEM_WIDTH(32), .MEM_ADDR_BITS(BUFFER_ADDR_BITS)
+	)
+   buf_r_plus_s
+     (	.clk(clk),
+	.a_addr(buf_r_plus_s_wr_addr), .a_out(),                     .a_wr(buf_r_plus_s_wr_en), .a_in(buf_r_plus_s_wr_din),
+	.b_addr(buf_r_plus_s_rd_addr), .b_out(buf_r_plus_s_rd_dout)
+	);
+
+   wire [BUFFER_ADDR_BITS-1:0] 									buf_u_minus_v_wr_addr;
+   wire [BUFFER_ADDR_BITS-1:0] 									buf_u_minus_v_rd_addr;
+   wire 											buf_u_minus_v_wr_en;
+   wire [              32-1:0] 									buf_u_minus_v_wr_din;
+   wire [              32-1:0] 									buf_u_minus_v_wr_dout;
+
+   assign buf_u_minus_v_rd_addr = ~buf_u_minus_v_wr_addr;
+
+   bram_1rw_1ro_readfirst #
+     (	.MEM_WIDTH(32), .MEM_ADDR_BITS(BUFFER_ADDR_BITS)
+	)
+   buf_u_minus_v
+     (	.clk(clk),
+	.a_addr(buf_u_minus_v_wr_addr), .a_out(buf_u_minus_v_wr_dout), .a_wr(buf_u_minus_v_wr_en), .a_in(buf_u_minus_v_wr_din),
+	.b_addr(buf_u_minus_v_rd_addr), .b_out()
+	);
+
+   wire [BUFFER_ADDR_BITS-1:0] 									buf_v_minus_u_wr_addr;
+   wire [BUFFER_ADDR_BITS-1:0] 									buf_v_minus_u_rd_addr;
+   wire 											buf_v_minus_u_wr_en;
+   wire [              32-1:0] 									buf_v_minus_u_wr_din;
+   wire [              32-1:0] 									buf_v_minus_u_wr_dout;
+
+   assign buf_v_minus_u_rd_addr = ~buf_v_minus_u_wr_addr;
+
+   bram_1rw_1ro_readfirst #
+     (	.MEM_WIDTH(32), .MEM_ADDR_BITS(BUFFER_ADDR_BITS)
+	)
+   buf_v_minus_u
+     (	.clk(clk),
+	.a_addr(buf_v_minus_u_wr_addr), .a_out(buf_v_minus_u_wr_dout), .a_wr(buf_v_minus_u_wr_en), .a_in(buf_v_minus_u_wr_din),
+	.b_addr(buf_v_minus_u_rd_addr), .b_out()
+	);
+
+   wire [BUFFER_ADDR_BITS-1:0] 									buf_u_half_wr_addr;
+   wire [BUFFER_ADDR_BITS-1:0] 									buf_u_half_rd_addr;
+   wire 											buf_u_half_wr_en;
+   wire [              32-1:0] 									buf_u_half_wr_din;
+   wire [              32-1:0] 									buf_u_half_rd_dout;
+
+   bram_1rw_1ro_readfirst #
+     (	.MEM_WIDTH(32), .MEM_ADDR_BITS(BUFFER_ADDR_BITS)
+	)
+   buf_u_half
+     (	.clk(clk),
+	.a_addr(buf_u_half_wr_addr), .a_out(),                   .a_wr(buf_u_half_wr_en), .a_in(buf_u_half_wr_din),
+	.b_addr(buf_u_half_rd_addr), .b_out(buf_u_half_rd_dout)
+	);
+
+   wire [BUFFER_ADDR_BITS-1:0] 									buf_v_half_wr_addr;
+   wire [BUFFER_ADDR_BITS-1:0] 									buf_v_half_rd_addr;
+   wire 											buf_v_half_wr_en;
+   wire [              32-1:0] 									buf_v_half_wr_din;
+   wire [              32-1:0] 									buf_v_half_rd_dout;
+
+   bram_1rw_1ro_readfirst #
+     (	.MEM_WIDTH(32), .MEM_ADDR_BITS(BUFFER_ADDR_BITS)
+	)
+   buf_v_half
+     (	.clk(clk),
+	.a_addr(buf_v_half_wr_addr), .a_out(),                   .a_wr(buf_v_half_wr_en), .a_in(buf_v_half_wr_din),
+	.b_addr(buf_v_half_rd_addr), .b_out(buf_v_half_rd_dout)
+	);
+
+   wire [BUFFER_ADDR_BITS-1:0] 									buf_u_minus_v_half_wr_addr;
+   wire [BUFFER_ADDR_BITS-1:0] 									buf_u_minus_v_half_rd_addr;
+   wire 											buf_u_minus_v_half_wr_en;
+   wire [              32-1:0] 									buf_u_minus_v_half_wr_din;
+   wire [              32-1:0] 									buf_u_minus_v_half_rd_dout;
+
+   bram_1rw_1ro_readfirst #
+     (	.MEM_WIDTH(32), .MEM_ADDR_BITS(BUFFER_ADDR_BITS)
+	)
+   buf_u_minus_v_half
+     (	.clk(clk),
+	.a_addr(buf_u_minus_v_half_wr_addr), .a_out(),                           .a_wr(buf_u_minus_v_half_wr_en), .a_in(buf_u_minus_v_half_wr_din),
+	.b_addr(buf_u_minus_v_half_rd_addr), .b_out(buf_u_minus_v_half_rd_dout)
+	);
+
+   wire [BUFFER_ADDR_BITS-1:0] 									buf_v_minus_u_half_wr_addr;
+   wire [BUFFER_ADDR_BITS-1:0] 									buf_v_minus_u_half_rd_addr;
+   wire 											buf_v_minus_u_half_wr_en;
+   wire [              32-1:0] 									buf_v_minus_u_half_wr_din;
+   wire [              32-1:0] 									buf_v_minus_u_half_rd_dout;
+
+   bram_1rw_1ro_readfirst #
+     (	.MEM_WIDTH(32), .MEM_ADDR_BITS(BUFFER_ADDR_BITS)
+	)
+   buf_v_minus_u_half
+     (	.clk(clk),
+	.a_addr(buf_v_minus_u_half_wr_addr), .a_out(),                           .a_wr(buf_v_minus_u_half_wr_en), .a_in(buf_v_minus_u_half_wr_din),
+	.b_addr(buf_v_minus_u_half_rd_addr), .b_out(buf_v_minus_u_half_rd_dout)
+	);
+
+
+   //
+   // Helper Modules
+   //
+   wire 											helper_init_ena;
+   wire 											helper_invert_precalc_ena;
+   wire 											helper_invert_compare_ena;
+   wire 											helper_invert_update_ena;
+   wire 											helper_reduce_precalc_ena;
+   wire 											helper_reduce_update_ena;
+   wire 											helper_copy_ena;
+
+   wire 											helper_init_rdy;
+   wire 											helper_invert_precalc_rdy;
+   wire 											helper_invert_compare_rdy;
+   wire 											helper_invert_update_rdy;
+   wire 											helper_reduce_precalc_rdy;
+   wire 											helper_reduce_update_rdy;
+   wire 											helper_copy_rdy;
+
+   wire 											helper_init_done				= helper_init_rdy           && !helper_init_ena;
+   wire 											helper_invert_precalc_done	= helper_invert_precalc_rdy && !helper_invert_precalc_ena;
+   wire 											helper_invert_compare_done	= helper_invert_compare_rdy && !helper_invert_compare_ena;
+   wire 											helper_invert_update_done	= helper_invert_update_rdy  && !helper_invert_update_ena;
+   wire 											helper_reduce_precalc_done	= helper_reduce_precalc_rdy && !helper_reduce_precalc_ena;
+   wire 											helper_reduce_update_done	= helper_reduce_update_rdy  && !helper_reduce_update_ena;
+   wire 											helper_copy_done				= helper_copy_rdy           && !helper_copy_ena;
+
+
+   //
+   // Helper Module - Initialization
+   //
+   wire [ BUFFER_ADDR_BITS-1:0] 								helper_init_r_addr;
+   wire [ BUFFER_ADDR_BITS-1:0] 								helper_init_s_addr;
+   wire [ BUFFER_ADDR_BITS-1:0] 								helper_init_u_addr;
+   wire [ BUFFER_ADDR_BITS-1:0] 								helper_init_v_addr;
+   wire [OPERAND_ADDR_BITS-1:0] 								helper_init_q_addr;
+
+   wire 											helper_init_r_wren;
+   wire 											helper_init_s_wren;
+   wire 											helper_init_u_wren;
+   wire 											helper_init_v_wren;
+
+   wire [              32-1:0] 									helper_init_r_data;
+   wire [              32-1:0] 									helper_init_s_data;
+   wire [              32-1:0] 									helper_init_u_data;
+   wire [              32-1:0] 									helper_init_v_data;
+
+   modinv_helper_init #
+     (
+      .OPERAND_NUM_WORDS	(OPERAND_NUM_WORDS),
+      .OPERAND_ADDR_BITS	(OPERAND_ADDR_BITS),
+
+      .BUFFER_NUM_WORDS		(BUFFER_NUM_WORDS),
+      .BUFFER_ADDR_BITS		(BUFFER_ADDR_BITS)
+      )
+   helper_init
+     (
+      .clk 		(clk),
+      .rst_n	(rst_n),
+
+      .ena 		(helper_init_ena),
+      .rdy 		(helper_init_rdy),
+
+      .a_addr	(a_addr),
+      .q_addr	(helper_init_q_addr),
+
+      .r_addr	(helper_init_r_addr),
+      .s_addr	(helper_init_s_addr),
+      .u_addr	(helper_init_u_addr),
+      .v_addr	(helper_init_v_addr),
+
+      .q_din	(q_din),
+      .a_din	(a_din),
+
+      .r_dout	(helper_init_r_data),
+      .s_dout	(helper_init_s_data),
+      .u_dout	(helper_init_u_data),
+      .v_dout	(helper_init_v_data),
+
+      .r_wren	(helper_init_r_wren),
+      .s_wren	(helper_init_s_wren),
+      .u_wren	(helper_init_u_wren),
+      .v_wren	(helper_init_v_wren)
+      );
+
+
+   //
+   // Helper Module - Inversion Pre-Calculation
+   //
+   wire [BUFFER_ADDR_BITS-1:0] 									helper_invert_precalc_r_addr;
+   wire [BUFFER_ADDR_BITS-1:0] 									helper_invert_precalc_s_addr;
+   wire [BUFFER_ADDR_BITS-1:0] 									helper_invert_precalc_u_addr;
+   wire [BUFFER_ADDR_BITS-1:0] 									helper_invert_precalc_v_addr;
+
+   modinv_helper_invert_precalc #
+     (
+      .BUFFER_NUM_WORDS		(BUFFER_NUM_WORDS),
+      .BUFFER_ADDR_BITS		(BUFFER_ADDR_BITS)
+      )
+   helper_invert_precalc
+     (
+      .clk 							(clk),
+      .rst_n						(rst_n),
+
+      .ena 							(helper_invert_precalc_ena),
+      .rdy 							(helper_invert_precalc_rdy),
+
+      .r_addr						(helper_invert_precalc_r_addr),
+      .s_addr						(helper_invert_precalc_s_addr),
+      .u_addr						(helper_invert_precalc_u_addr),
+      .v_addr						(helper_invert_precalc_v_addr),
+
+      .r_din						(buf_r_rd_dout),
+      .s_din						(buf_s_rd_dout),
+      .u_din						(buf_u_rd_dout),
+      .v_din						(buf_v_rd_dout),
+
+      .r_dbl_addr					(buf_r_dbl_wr_addr),
+      .s_dbl_addr					(buf_s_dbl_wr_addr),
+      .r_plus_s_addr				(buf_r_plus_s_wr_addr),
+
+      .u_half_addr				(buf_u_half_wr_addr),
+      .v_half_addr				(buf_v_half_wr_addr),
+      .u_minus_v_addr			(buf_u_minus_v_wr_addr),
+      .v_minus_u_addr			(buf_v_minus_u_wr_addr),
+      .u_minus_v_half_addr		(buf_u_minus_v_half_wr_addr),
+      .v_minus_u_half_addr		(buf_v_minus_u_half_wr_addr),
+
+      .r_dbl_dout					(buf_r_dbl_wr_din),
+      .s_dbl_dout					(buf_s_dbl_wr_din),
+      .r_plus_s_dout				(buf_r_plus_s_wr_din),
+
+      .u_half_dout				(buf_u_half_wr_din),
+      .v_half_dout				(buf_v_half_wr_din),
+      .u_minus_v_dout			(buf_u_minus_v_wr_din),
+      .v_minus_u_dout			(buf_v_minus_u_wr_din),
+      .u_minus_v_half_dout		(buf_u_minus_v_half_wr_din),
+      .v_minus_u_half_dout		(buf_v_minus_u_half_wr_din),
+
+      .r_dbl_wren					(buf_r_dbl_wr_en),
+      .s_dbl_wren					(buf_s_dbl_wr_en),
+      .r_plus_s_wren				(buf_r_plus_s_wr_en),
+
+      .u_half_wren				(buf_u_half_wr_en),
+      .v_half_wren				(buf_v_half_wr_en),
+      .u_minus_v_wren			(buf_u_minus_v_wr_en),
+      .v_minus_u_wren			(buf_v_minus_u_wr_en),
+      .u_minus_v_half_wren		(buf_u_minus_v_half_wr_en),
+      .v_minus_u_half_wren		(buf_v_minus_u_half_wr_en),
+
+      .u_minus_v_din				(buf_u_minus_v_wr_dout),
+      .v_minus_u_din				(buf_v_minus_u_wr_dout)
+      );
+
+
+   //
+   // Helper Module - Inversion Comparison
+   //
+   wire [BUFFER_ADDR_BITS-1:0] 									helper_invert_compare_u_addr;
+   wire [BUFFER_ADDR_BITS-1:0] 									helper_invert_compare_v_addr;
+
+   wire 											flag_invert_u_gt_v;
+   wire 											flag_invert_v_eq_1;
+   wire 											flag_invert_u_is_even;
+   wire 											flag_invert_v_is_even;
+
+   modinv_helper_invert_compare #
+     (
+      .BUFFER_NUM_WORDS		(BUFFER_NUM_WORDS),
+      .BUFFER_ADDR_BITS		(BUFFER_ADDR_BITS)
+      )
+   helper_invert_compare
+     (
+      .clk 			(clk),
+      .rst_n		(rst_n),
+
+      .ena 			(helper_invert_compare_ena),
+      .rdy 			(helper_invert_compare_rdy),
+
+      .u_addr		(helper_invert_compare_u_addr),
+      .v_addr		(helper_invert_compare_v_addr),
+
+      .u_din		(buf_u_rd_dout),
+      .v_din		(buf_v_rd_dout),
+
+      .u_gt_v		(flag_invert_u_gt_v),
+      .v_eq_1		(flag_invert_v_eq_1),
+      .u_is_even	(flag_invert_u_is_even),
+      .v_is_even	(flag_invert_v_is_even)
+      );
+
+
+   //
+   // Helper Module - Inversion Update
+   //
+   wire [BUFFER_ADDR_BITS-1:0] 									helper_invert_update_r_addr;
+   wire [BUFFER_ADDR_BITS-1:0] 									helper_invert_update_s_addr;
+   wire [BUFFER_ADDR_BITS-1:0] 									helper_invert_update_u_addr;
+   wire [BUFFER_ADDR_BITS-1:0] 									helper_invert_update_v_addr;
+
+   wire 											helper_invert_update_r_wren;
+   wire 											helper_invert_update_s_wren;
+   wire 											helper_invert_update_u_wren;
+   wire 											helper_invert_update_v_wren;
+
+   wire [              32-1:0] 									helper_invert_update_r_data;
+   wire [              32-1:0] 									helper_invert_update_s_data;
+   wire [              32-1:0] 									helper_invert_update_u_data;
+   wire [              32-1:0] 									helper_invert_update_v_data;
+
+   modinv_helper_invert_update #
+     (
+      .BUFFER_NUM_WORDS		(BUFFER_NUM_WORDS),
+      .BUFFER_ADDR_BITS		(BUFFER_ADDR_BITS)
+      )
+   helper_invert_update
+     (
+      .clk 							(clk),
+      .rst_n						(rst_n),
+
+      .ena 							(helper_invert_update_ena),
+      .rdy 							(helper_invert_update_rdy),
+
+      .u_gt_v						(flag_invert_u_gt_v),
+      .v_eq_1						(flag_invert_v_eq_1),
+      .u_is_even					(flag_invert_u_is_even),
+      .v_is_even					(flag_invert_v_is_even),
+
+      .r_addr						(helper_invert_update_r_addr),
+      .s_addr						(helper_invert_update_s_addr),
+      .u_addr						(helper_invert_update_u_addr),
+      .v_addr						(helper_invert_update_v_addr),
+
+      .r_wren						(helper_invert_update_r_wren),
+      .s_wren						(helper_invert_update_s_wren),
+      .u_wren						(helper_invert_update_u_wren),
+      .v_wren						(helper_invert_update_v_wren),
+
+      .r_dout						(helper_invert_update_r_data),
+      .s_dout						(helper_invert_update_s_data),
+      .u_dout						(helper_invert_update_u_data),
+      .v_dout						(helper_invert_update_v_data),
+
+      .r_dbl_addr					(buf_r_dbl_rd_addr),
+      .s_dbl_addr					(buf_s_dbl_rd_addr),
+      .r_plus_s_addr				(buf_r_plus_s_rd_addr),
+      .u_half_addr				(buf_u_half_rd_addr),
+      .v_half_addr				(buf_v_half_rd_addr),
+      .u_minus_v_half_addr		(buf_u_minus_v_half_rd_addr),
+      .v_minus_u_half_addr		(buf_v_minus_u_half_rd_addr),
+
+      .r_dbl_din					(buf_r_dbl_rd_dout),
+      .s_dbl_din					(buf_s_dbl_rd_dout),
+      .r_plus_s_din				(buf_r_plus_s_rd_dout),
+      .u_half_din					(buf_u_half_rd_dout),
+      .v_half_din					(buf_v_half_rd_dout),
+      .u_minus_v_half_din		(buf_u_minus_v_half_rd_dout),
+      .v_minus_u_half_din		(buf_v_minus_u_half_rd_dout)
+      );
+
+
+   //
+   // Helper Module - Reduction Pre-Calculation
+   //
+   wire [ BUFFER_ADDR_BITS-1:0] 								helper_reduce_precalc_r_addr;
+   wire [ BUFFER_ADDR_BITS-1:0] 								helper_reduce_precalc_s_addr;
+   wire [ BUFFER_ADDR_BITS-1:0] 								helper_reduce_precalc_u_addr;
+   wire [ BUFFER_ADDR_BITS-1:0] 								helper_reduce_precalc_v_addr;
+   wire [OPERAND_ADDR_BITS-1:0] 								helper_reduce_precalc_q_addr;
+
+   wire 											helper_reduce_precalc_r_wren;
+   wire 											helper_reduce_precalc_u_wren;
+   wire 											helper_reduce_precalc_v_wren;
+
+   wire [              32-1:0] 									helper_reduce_precalc_r_data;
+   wire [              32-1:0] 									helper_reduce_precalc_u_data;
+   wire [              32-1:0] 									helper_reduce_precalc_v_data;
+
+   wire 											flag_reduce_s_is_odd;
+   wire 											flag_invert_k_is_nul;
+
+   modinv_helper_reduce_precalc #
+     (
+      .OPERAND_NUM_WORDS	(OPERAND_NUM_WORDS),
+      .OPERAND_ADDR_BITS	(OPERAND_ADDR_BITS),
+      .BUFFER_NUM_WORDS		(BUFFER_NUM_WORDS),
+      .BUFFER_ADDR_BITS		(BUFFER_ADDR_BITS),
+      .K_NUM_BITS				(K_NUM_BITS)
+      )
+   helper_reduce_precalc
+     (
+      .clk 			(clk),
+      .rst_n		(rst_n),
+
+      .ena 			(helper_reduce_precalc_ena),
+      .rdy 			(helper_reduce_precalc_rdy),
+
+      .r_addr		(helper_reduce_precalc_r_addr),
+      .s_addr		(helper_reduce_precalc_s_addr),
+      .u_addr		(helper_reduce_precalc_u_addr),
+      .v_addr		(helper_reduce_precalc_v_addr),
+      .q_addr		(helper_reduce_precalc_q_addr),
+
+      .k				(k),
+
+      .s_is_odd	(flag_reduce_s_is_odd),
+      .k_is_nul	(flag_reduce_k_is_nul),
+
+      .r_din		(buf_r_wr_dout),
+      .s_din		(buf_s_rd_dout),
+      .q_din		(q_din),
+
+      .r_wren		(helper_reduce_precalc_r_wren),
+      .u_wren		(helper_reduce_precalc_u_wren),
+      .v_wren		(helper_reduce_precalc_v_wren),
+
+      .r_dout		(helper_reduce_precalc_r_data),
+      .u_dout		(helper_reduce_precalc_u_data),
+      .v_dout		(helper_reduce_precalc_v_data)
+      );
+
+   //
+   // Helper Module - Reduction Update
+   //
+   wire [BUFFER_ADDR_BITS-1:0] 									helper_reduce_update_s_addr;
+   wire [BUFFER_ADDR_BITS-1:0] 									helper_reduce_update_u_addr;
+   wire [BUFFER_ADDR_BITS-1:0] 									helper_reduce_update_v_addr;
+
+   wire 											helper_reduce_update_s_wren;
+
+   wire [              32-1:0] 									helper_reduce_update_s_data;
+
+   modinv_helper_reduce_update #
+     (
+      .BUFFER_NUM_WORDS		(BUFFER_NUM_WORDS),
+      .BUFFER_ADDR_BITS		(BUFFER_ADDR_BITS)
+      )
+   helper_reduce_update
+     (
+      .clk 							(clk),
+      .rst_n						(rst_n),
+
+      .ena 							(helper_reduce_update_ena),
+      .rdy 							(helper_reduce_update_rdy),
+
+      .s_is_odd					(flag_reduce_s_is_odd),
+      .k_is_nul					(flag_reduce_k_is_nul),
+
+      .s_addr						(helper_reduce_update_s_addr),
+      .u_addr						(helper_reduce_update_u_addr),
+      .v_addr						(helper_reduce_update_v_addr),
+
+      .s_wren						(helper_reduce_update_s_wren),
+
+      .s_dout						(helper_reduce_update_s_data),
+
+      .u_din						(buf_u_rd_dout),
+      .v_din						(buf_v_rd_dout)
+      );
+
+
+   //
+   // Helper Module - Copying
+   //
+   wire [BUFFER_ADDR_BITS-1:0] 									helper_copy_s_addr;
+
+   modinv_helper_copy #
+     (
+      .OPERAND_NUM_WORDS	(OPERAND_NUM_WORDS),
+      .OPERAND_ADDR_BITS	(OPERAND_ADDR_BITS),
+
+      .BUFFER_NUM_WORDS		(BUFFER_NUM_WORDS),
+      .BUFFER_ADDR_BITS		(BUFFER_ADDR_BITS)
+      )
+   helper_copy
+     (
+      .clk 		(clk),
+      .rst_n	(rst_n),
+
+      .ena 		(helper_copy_ena),
+      .rdy 		(helper_copy_rdy),
+
+      .s_addr	(helper_copy_s_addr),
+      .a1_addr	(a1_addr),
+
+      .s_din	(buf_s_rd_dout),
+
+      .a1_dout	(a1_dout),
+
+      .a1_wren	(a1_wren)
+      );
+
+
+   //
+   // Round Counter
+   //
+   reg [ROUND_COUNTER_BITS-1:0] 								round_counter;
+   wire [ROUND_COUNTER_BITS-1:0] 								round_counter_max = LOOP_NUM_ROUNDS - 1;
+   wire [ROUND_COUNTER_BITS-1:0] 								round_counter_zero = {ROUND_COUNTER_BITS{1'b0}};
+   wire [ROUND_COUNTER_BITS-1:0] 								round_counter_next =
+												(round_counter < round_counter_max) ? round_counter + 1'b1 : round_counter_zero;
+
+
+   //
+   // FSM
+   //
+   localparam FSM_STATE_IDLE				= 4'd0;
+
+   localparam FSM_STATE_INIT				= 4'd1;
+
+   localparam FSM_STATE_INVERT_PRECALC	= 4'd11;
+   localparam FSM_STATE_INVERT_COMPARE	= 4'd12;
+   localparam FSM_STATE_INVERT_UPDATE	= 4'd13;
+
+   localparam FSM_STATE_REDUCE_PRECALC	= 4'd14;
+   localparam FSM_STATE_REDUCE_UPDATE	= 4'd15;
+
+   localparam FSM_STATE_COPY				= 4'd2;
+
+   localparam FSM_STATE_DONE				= 4'd3;
+
+   reg [3:0] 											fsm_state = FSM_STATE_IDLE;
+   reg [3:0] 											fsm_state_dly = FSM_STATE_IDLE;
+
+   wire 											fsm_state_new = (fsm_state != fsm_state_dly);
+
+   wire [3:0] 											fsm_state_invert_next = (round_counter < round_counter_max) ?
+												FSM_STATE_INVERT_PRECALC : FSM_STATE_REDUCE_PRECALC;
+
+   wire [3:0] 											fsm_state_reduce_next = (round_counter < round_counter_max) ?
+												FSM_STATE_REDUCE_PRECALC : FSM_STATE_COPY;
+
+   always @(posedge clk or negedge rst_n)
+     //
+     if (rst_n == 1'b0) fsm_state <= FSM_STATE_IDLE;
+     else case (fsm_state)
+	    FSM_STATE_IDLE:				fsm_state <= ena                        ? FSM_STATE_INIT           : FSM_STATE_IDLE;
+	    FSM_STATE_INIT:				fsm_state <= helper_init_done           ? FSM_STATE_INVERT_PRECALC : FSM_STATE_INIT;
+	    FSM_STATE_INVERT_PRECALC:	fsm_state <= helper_invert_precalc_done ? FSM_STATE_INVERT_COMPARE : FSM_STATE_INVERT_PRECALC;
+	    FSM_STATE_INVERT_COMPARE:	fsm_state <= helper_invert_compare_done ? FSM_STATE_INVERT_UPDATE  : FSM_STATE_INVERT_COMPARE;
+	    FSM_STATE_INVERT_UPDATE:	fsm_state <= helper_invert_update_done  ? fsm_state_invert_next    : FSM_STATE_INVERT_UPDATE;
+	    FSM_STATE_REDUCE_PRECALC:	fsm_state <= helper_reduce_precalc_done ? FSM_STATE_REDUCE_UPDATE  : FSM_STATE_REDUCE_PRECALC;
+	    FSM_STATE_REDUCE_UPDATE:	fsm_state <= helper_reduce_update_done  ? fsm_state_reduce_next    : FSM_STATE_REDUCE_UPDATE;
+	    FSM_STATE_COPY:				fsm_state <= helper_copy_done           ? FSM_STATE_DONE           : FSM_STATE_COPY;
+	    FSM_STATE_DONE:				fsm_state <= FSM_STATE_IDLE;
+	    default:							fsm_state <= FSM_STATE_IDLE;
+	  endcase
+
+   always @(posedge clk or negedge rst_n)
+     //
+     if (rst_n == 1'b0)	fsm_state_dly <= FSM_STATE_IDLE;
+     else						fsm_state_dly <= fsm_state;
+
+
+   assign helper_init_ena				= (fsm_state == FSM_STATE_INIT)           && fsm_state_new;
+   assign helper_invert_precalc_ena	= (fsm_state == FSM_STATE_INVERT_PRECALC) && fsm_state_new;
+   assign helper_invert_compare_ena	= (fsm_state == FSM_STATE_INVERT_COMPARE) && fsm_state_new;
+   assign helper_invert_update_ena	= (fsm_state == FSM_STATE_INVERT_UPDATE)  && fsm_state_new;
+   assign helper_reduce_precalc_ena	= (fsm_state == FSM_STATE_REDUCE_PRECALC) && fsm_state_new;
+   assign helper_reduce_update_ena	= (fsm_state == FSM_STATE_REDUCE_UPDATE)  && fsm_state_new;
+   assign helper_copy_ena				= (fsm_state == FSM_STATE_COPY)           && fsm_state_new;
+
+
+   //
+   // Counter Increment
+   //
+   always @(posedge clk) begin
+      //
+      if ((fsm_state == FSM_STATE_INIT) && helper_init_done)
+	round_counter <= round_counter_zero;
+      //
+      if ((fsm_state == FSM_STATE_INVERT_UPDATE) && helper_invert_update_done)
+	round_counter <= round_counter_next;
+      //
+      if ((fsm_state == FSM_STATE_REDUCE_UPDATE) && helper_reduce_update_done)
+	round_counter <= round_counter_next;
+      //
+   end
+
+
+   //
+   // Q Address Selector
+   //
+   always @(*) begin
+      //
+      case (fsm_state)
+	FSM_STATE_INIT:				q_addr = helper_init_q_addr;
+	FSM_STATE_REDUCE_PRECALC:	q_addr = helper_reduce_precalc_q_addr;
+	default:							q_addr = {OPERAND_ADDR_BITS{1'bX}};
+      endcase
+      //
+   end
+
+
+   //
+   // Buffer Address Selector
+   //
+   always @(*) begin
+      //
+      // Write Ports
+      //
+      case (fsm_state)
+	FSM_STATE_INIT:				buf_r_wr_addr = helper_init_r_addr;
+	FSM_STATE_INVERT_UPDATE:	buf_r_wr_addr = helper_invert_update_r_addr;
+	FSM_STATE_REDUCE_PRECALC:	buf_r_wr_addr = helper_reduce_precalc_r_addr;
+	default:							buf_r_wr_addr = {BUFFER_ADDR_BITS{1'bX}};
+      endcase
+      //
+      case (fsm_state)
+	FSM_STATE_INIT:				buf_s_wr_addr = helper_init_s_addr;
+	FSM_STATE_INVERT_UPDATE:	buf_s_wr_addr = helper_invert_update_s_addr;
+	FSM_STATE_REDUCE_UPDATE:	buf_s_wr_addr = helper_reduce_update_s_addr;
+	default:							buf_s_wr_addr = {BUFFER_ADDR_BITS{1'bX}};
+      endcase
+      //
+      case (fsm_state)
+	FSM_STATE_INIT:				buf_u_wr_addr = helper_init_u_addr;
+	FSM_STATE_INVERT_UPDATE:	buf_u_wr_addr = helper_invert_update_u_addr;
+	FSM_STATE_REDUCE_PRECALC:	buf_u_wr_addr = helper_reduce_precalc_u_addr;
+	default:							buf_u_wr_addr = {BUFFER_ADDR_BITS{1'bX}};
+      endcase
+      //
+      case (fsm_state)
+	FSM_STATE_INIT:				buf_v_wr_addr = helper_init_v_addr;
+	FSM_STATE_INVERT_UPDATE:	buf_v_wr_addr = helper_invert_update_v_addr;
+	FSM_STATE_REDUCE_PRECALC:	buf_v_wr_addr = helper_reduce_precalc_v_addr;
+	default:							buf_v_wr_addr = {BUFFER_ADDR_BITS{1'bX}};
+      endcase
+      //
+      // Read Ports
+      //
+      case (fsm_state)
+	FSM_STATE_INVERT_PRECALC:	buf_r_rd_addr = helper_invert_precalc_r_addr;
+	default:							buf_r_rd_addr = {BUFFER_ADDR_BITS{1'bX}};
+      endcase
+      //
+      case (fsm_state)
+	FSM_STATE_INVERT_PRECALC:	buf_s_rd_addr = helper_invert_precalc_s_addr;
+	FSM_STATE_REDUCE_PRECALC:	buf_s_rd_addr = helper_reduce_precalc_s_addr;
+	FSM_STATE_COPY:				buf_s_rd_addr = helper_copy_s_addr;
+	default:							buf_s_rd_addr = {BUFFER_ADDR_BITS{1'bX}};
+      endcase
+      //
+      case (fsm_state)
+	FSM_STATE_INVERT_PRECALC:	buf_u_rd_addr = helper_invert_precalc_u_addr;
+	FSM_STATE_INVERT_COMPARE:	buf_u_rd_addr = helper_invert_compare_u_addr;
+	FSM_STATE_REDUCE_UPDATE:	buf_u_rd_addr = helper_reduce_update_u_addr;
+	default:							buf_u_rd_addr = {BUFFER_ADDR_BITS{1'bX}};
+      endcase
+      //
+      case (fsm_state)
+	FSM_STATE_INVERT_PRECALC:	buf_v_rd_addr = helper_invert_precalc_v_addr;
+	FSM_STATE_INVERT_COMPARE:	buf_v_rd_addr = helper_invert_compare_v_addr;
+	FSM_STATE_REDUCE_UPDATE:	buf_v_rd_addr = helper_reduce_update_v_addr;
+	default:							buf_v_rd_addr = {BUFFER_ADDR_BITS{1'bX}};
+      endcase
+      //
+   end
+
+
+   //
+   // Buffer Write Enable Logic
+   //
+   always @(*) begin
+      //
+      // Write Ports
+      //
+      case (fsm_state)
+	FSM_STATE_INIT:				buf_r_wr_en  = helper_init_r_wren;
+	FSM_STATE_INVERT_UPDATE:	buf_r_wr_en = helper_invert_update_r_wren;
+	FSM_STATE_REDUCE_PRECALC:	buf_r_wr_en = helper_reduce_precalc_r_wren;
+	default:							buf_r_wr_en = 1'b0;
+      endcase
+      //
+      case (fsm_state)
+	FSM_STATE_INIT:				buf_s_wr_en = helper_init_s_wren;
+	FSM_STATE_INVERT_UPDATE:	buf_s_wr_en = helper_invert_update_s_wren;
+	FSM_STATE_REDUCE_UPDATE:	buf_s_wr_en = helper_reduce_update_s_wren;
+	default:							buf_s_wr_en = 1'b0;
+      endcase
+      //
+      case (fsm_state)
+	FSM_STATE_INIT:				buf_u_wr_en = helper_init_u_wren;
+	FSM_STATE_INVERT_UPDATE:	buf_u_wr_en = helper_invert_update_u_wren;
+	FSM_STATE_REDUCE_PRECALC:	buf_u_wr_en = helper_reduce_precalc_u_wren;
+	default:							buf_u_wr_en = 1'b0;
+      endcase
+      //
+      case (fsm_state)
+	FSM_STATE_INIT:				buf_v_wr_en = helper_init_v_wren;
+	FSM_STATE_INVERT_UPDATE:	buf_v_wr_en = helper_invert_update_v_wren;
+	FSM_STATE_REDUCE_PRECALC:	buf_v_wr_en = helper_reduce_precalc_v_wren;
+	default:							buf_v_wr_en = 1'b0;
+      endcase
+      //
+   end
+
+
+   //
+   // Buffer Write Data Selector
+   //
+   always @(*) begin
+      //
+      case (fsm_state)
+	FSM_STATE_INIT:				buf_r_wr_din = helper_init_r_data;
+	FSM_STATE_INVERT_UPDATE:	buf_r_wr_din = helper_invert_update_r_data;
+	FSM_STATE_REDUCE_PRECALC:	buf_r_wr_din = helper_reduce_precalc_r_data;
+	default:							buf_r_wr_din = {32{1'bX}};
+      endcase
+      //
+      case (fsm_state)
+	FSM_STATE_INIT:				buf_s_wr_din = helper_init_s_data;
+	FSM_STATE_INVERT_UPDATE:	buf_s_wr_din = helper_invert_update_s_data;
+	FSM_STATE_REDUCE_UPDATE:	buf_s_wr_din = helper_reduce_update_s_data;
+	default:							buf_s_wr_din = {32{1'bX}};
+      endcase
+      //
+      case (fsm_state)
+	FSM_STATE_INIT:				buf_u_wr_din = helper_init_u_data;
+	FSM_STATE_INVERT_UPDATE:	buf_u_wr_din = helper_invert_update_u_data;
+	FSM_STATE_REDUCE_PRECALC:	buf_u_wr_din = helper_reduce_precalc_u_data;
+	default:							buf_u_wr_din = {32{1'bX}};
+      endcase
+      //
+      case (fsm_state)
+	FSM_STATE_INIT:				buf_v_wr_din = helper_init_v_data;
+	FSM_STATE_INVERT_UPDATE:	buf_v_wr_din = helper_invert_update_v_data;
+	FSM_STATE_REDUCE_PRECALC:	buf_v_wr_din = helper_reduce_precalc_v_data;
+	default:							buf_v_wr_din = {32{1'bX}};
+      endcase
+      //
+   end
+
+
+   //
+   // Ready Logic
+   //
+   reg rdy_reg = 1'b1;
+
+   assign rdy = rdy_reg;
+
+   always @(posedge clk or negedge rst_n)
+     //
+     if (rst_n == 1'b0) rdy_reg <= 1'b1;
+     else begin
+
+	/* clear */
+	if (rdy && ena) rdy_reg <= 1'b0;
+
+	/* set */
+	if (!rdy && (fsm_state == FSM_STATE_DONE)) rdy_reg <= 1'b1;
+
+     end
+
+
+   //
+   // Store Redundant Power of 2 (K)
+   //
+   always @(posedge clk)
+     //
+     if (helper_init_ena)
+       k <= {K_NUM_BITS{1'b0}};
+     else begin
+
+	if (helper_invert_update_ena && !flag_invert_v_eq_1)
+	  k <= k + 1'b1;
+
+	if (helper_reduce_update_ena && (k != {K_NUM_BITS{1'b0}}))
+	  k <= k - 1'b1;
+
+     end
+
+     endmodule
+
+
 //------------------------------------------------------------------------------
 // End-of-File
-//------------------------------------------------------------------------------

+//------------------------------------------------------------------------------
diff --git a/rtl/modular/modular_multiplier_256.v b/rtl/modular/modular_multiplier_256.v
deleted file mode 100644
index c2f2661..0000000
--- a/rtl/modular/modular_multiplier_256.v
+++ /dev/null
@@ -1,402 +0,0 @@
-//------------------------------------------------------------------------------

-//

-// modular_multiplier_256.v

-// -----------------------------------------------------------------------------

-// Modular multiplier.

-//

-// Authors: Pavel Shatov

-//

-// Copyright (c) 2015-2016, NORDUnet A/S

-//

-// Redistribution and use in source and binary forms, with or without

-// modification, are permitted provided that the following conditions are met:

-//

-// - Redistributions of source code must retain the above copyright notice,

-//   this list of conditions and the following disclaimer.

-//

-// - Redistributions in binary form must reproduce the above copyright notice,

-//   this list of conditions and the following disclaimer in the documentation

-//   and/or other materials provided with the distribution.

-//

-// - Neither the name of the NORDUnet nor the names of its contributors may be

-//   used to endorse or promote products derived from this software without

-//   specific prior written permission.

-//

-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"

-// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

-// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

-// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE

-// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

-// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

-// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

-// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN

-// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

-// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

-// POSSIBILITY OF SUCH DAMAGE.

-//

-//------------------------------------------------------------------------------

-

-module modular_multiplier_256

-	(

-		clk, rst_n,

-		ena, rdy,

-		a_addr, b_addr, n_addr, p_addr, p_wren,

-		a_din, b_din, n_din, p_dout

-	);

-	

-	

-		//

-		// Constants

-		//

-	localparam	OPERAND_NUM_WORDS					= 8;

-	localparam	WORD_COUNTER_WIDTH				= 3;

-	

-	

-		//

-		// Handy Numbers

-		//

-	localparam	[WORD_COUNTER_WIDTH-1:0]	WORD_INDEX_ZERO	= 0;

-	localparam	[WORD_COUNTER_WIDTH-1:0]	WORD_INDEX_LAST	= OPERAND_NUM_WORDS - 1;

-	

-	

-		//

-		// Handy Functions

-		//

-	function	[WORD_COUNTER_WIDTH-1:0]	WORD_INDEX_NEXT_OR_ZERO;

-		input	[WORD_COUNTER_WIDTH-1:0]	WORD_INDEX_CURRENT;

-		begin

-			WORD_INDEX_NEXT_OR_ZERO = (WORD_INDEX_CURRENT < WORD_INDEX_LAST) ?

-				WORD_INDEX_CURRENT + 1'b1 : WORD_INDEX_ZERO;

-		end

-	endfunction

-	

-	function	[WORD_COUNTER_WIDTH-1:0]	WORD_INDEX_PREVIOUS_OR_LAST;

-		input	[WORD_COUNTER_WIDTH-1:0]	WORD_INDEX_CURRENT;

-		begin

-			WORD_INDEX_PREVIOUS_OR_LAST = (WORD_INDEX_CURRENT > WORD_INDEX_ZERO) ?

-				WORD_INDEX_CURRENT - 1'b1 : WORD_INDEX_LAST;

-		end

-	endfunction

-	

-	

-		//

-		// Ports

-		//

-	input		wire										clk;		// system clock

-	input		wire										rst_n;	// active-low async reset

-	

-	input		wire										ena;		// enable input

-	output	wire										rdy;		// ready output

-	

-	output	wire	[WORD_COUNTER_WIDTH-1:0]	a_addr;	// index of current A word

-	output	wire	[WORD_COUNTER_WIDTH-1:0]	b_addr;	// index of current B word

-	output	wire	[WORD_COUNTER_WIDTH-1:0]	n_addr;	// index of current N word

-	output	wire	[WORD_COUNTER_WIDTH-1:0]	p_addr;	// index of current P word

-	output	wire										p_wren;	// store current P word now	

-	

-	input		wire	[                  31:0]	a_din;	// A

-	input		wire	[                  31:0]	b_din;	// B

-	input		wire	[                  31:0]	n_din;	// N (must be P-256!)

-	output	wire	[                  31:0]	p_dout;	// P = A * B mod N

-	

-	

-		//

-		// Word Indices

-		//

-	reg	[WORD_COUNTER_WIDTH-1:0]	index_a;

-	reg	[WORD_COUNTER_WIDTH-1:0]	index_b;

-		

-		/* map registers to output ports */

-	assign a_addr	= index_a;

-	assign b_addr	= index_b;

-	

-		//

-		// FSM

-		//

-	localparam	FSM_SHREG_WIDTH	= (1 * OPERAND_NUM_WORDS + 1) + (2 * OPERAND_NUM_WORDS + 1) + (2 * OPERAND_NUM_WORDS + 2) + (0 * OPERAND_NUM_WORDS + 2) + 1;

-	

-	reg	[FSM_SHREG_WIDTH-1:0]	fsm_shreg;

-	

-	assign rdy = fsm_shreg[0];

-	

-	wire [1 * OPERAND_NUM_WORDS-1:0]	fsm_shreg_inc_index_a	= fsm_shreg[FSM_SHREG_WIDTH - (0 * OPERAND_NUM_WORDS + 1) : FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 0)];

-	wire [1 * OPERAND_NUM_WORDS-1:0]	fsm_shreg_store_word_a	= fsm_shreg[FSM_SHREG_WIDTH - (0 * OPERAND_NUM_WORDS + 2) : FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 1)];

-	wire [2 * OPERAND_NUM_WORDS-1:0]	fsm_shreg_inc_index_b	= fsm_shreg[FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 1) : FSM_SHREG_WIDTH - (3 * OPERAND_NUM_WORDS + 1)];

-	wire [2 * OPERAND_NUM_WORDS-2:0]	fsm_shreg_store_si_msb	= fsm_shreg[FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 2) : FSM_SHREG_WIDTH - (3 * OPERAND_NUM_WORDS + 1)];

-	wire [0 * OPERAND_NUM_WORDS-0:0] fsm_shreg_store_si_lsb	= fsm_shreg[FSM_SHREG_WIDTH - (3 * OPERAND_NUM_WORDS + 2) : FSM_SHREG_WIDTH - (3 * OPERAND_NUM_WORDS + 2)];

-	wire [2 * OPERAND_NUM_WORDS-2:0]	fsm_shreg_shift_si		= fsm_shreg[FSM_SHREG_WIDTH - (3 * OPERAND_NUM_WORDS + 3) : FSM_SHREG_WIDTH - (5 * OPERAND_NUM_WORDS + 1)];

-	wire [0 * OPERAND_NUM_WORDS-0:0]	fsm_shreg_mask_cw1_sum	= fsm_shreg[FSM_SHREG_WIDTH - (3 * OPERAND_NUM_WORDS + 4) : FSM_SHREG_WIDTH - (3 * OPERAND_NUM_WORDS + 4)];

-	wire [2 * OPERAND_NUM_WORDS-1:0]	fsm_shreg_store_c_word	= fsm_shreg[FSM_SHREG_WIDTH - (3 * OPERAND_NUM_WORDS + 5) : FSM_SHREG_WIDTH - (5 * OPERAND_NUM_WORDS + 4)];

-	wire [0 * OPERAND_NUM_WORDS-0:0]	fsm_shreg_reduce_start	= fsm_shreg[FSM_SHREG_WIDTH - (5 * OPERAND_NUM_WORDS + 5) : FSM_SHREG_WIDTH - (5 * OPERAND_NUM_WORDS + 5)];

-	wire [0 * OPERAND_NUM_WORDS-0:0]	fsm_shreg_reduce_stop	= fsm_shreg[FSM_SHREG_WIDTH - (5 * OPERAND_NUM_WORDS + 6) : FSM_SHREG_WIDTH - (5 * OPERAND_NUM_WORDS + 6)];

-	

-	wire inc_index_a		= |fsm_shreg_inc_index_a;

-	wire store_word_a		= |fsm_shreg_store_word_a;

-	wire inc_index_b		= |fsm_shreg_inc_index_b;

-	wire clear_mac_ab		= |fsm_shreg_inc_index_b;

-	wire shift_wide_a		= |fsm_shreg_inc_index_b;

-	wire enable_mac_ab	= |fsm_shreg_inc_index_b;

-	wire store_si_msb		= |fsm_shreg_store_si_msb;

-	wire store_si_lsb		=  fsm_shreg_store_si_lsb;

-	wire shift_si			= |fsm_shreg_shift_si;

-	wire mask_cw1_sum		=  fsm_shreg_mask_cw1_sum;

-	wire store_c_word		= |fsm_shreg_store_c_word;

-	wire reduce_start		=  fsm_shreg_reduce_start;

-	wire reduce_stop		=  fsm_shreg_reduce_stop;

-	

-	

-		//

-		// FSM Logic

-		//

-	wire	reduce_done;

-		

-	always @(posedge clk or negedge rst_n)

-		//

-		if (rst_n == 1'b0)

-			//

-			fsm_shreg <= {{FSM_SHREG_WIDTH-1{1'b0}}, 1'b1};

-			//

-		else begin

-			//

-			if (rdy)

-				fsm_shreg <= {ena, {FSM_SHREG_WIDTH-2{1'b0}}, ~ena};

-			//

-			else if (!reduce_stop || reduce_done)

-				fsm_shreg <= {1'b0, fsm_shreg[FSM_SHREG_WIDTH-1:1]};

-			//

-		end

-	

-		

-		//

-		// Word Index Increment Logic

-		//

-	reg	index_b_ff;

-	

-	always @(posedge clk)

-		//

-		if (inc_index_b) index_b_ff <= ~index_b_ff;

-		else index_b_ff <= 1'b0;

-	

-	always @(posedge clk)

-		//

-		if (rdy) begin

-			//

-			index_a		<= WORD_INDEX_ZERO;

-			index_b		<= WORD_INDEX_LAST;

-			//

-		end else begin

-			//

-			if (inc_index_a)						index_a	<= WORD_INDEX_NEXT_OR_ZERO(index_a);

-			if (inc_index_b && !index_b_ff)	index_b	<= WORD_INDEX_PREVIOUS_OR_LAST(index_b);

-			//

-		end

-		

-		

-		//

-		// Wide Operand Buffer

-		//

-	reg	[255:0]	buf_a_wide;

-	

-	always @(posedge clk)

-		//

-		if (store_word_a)

-			buf_a_wide <= {buf_a_wide[16 +: 256 - 3 * 16], {a_din[15:0], a_din[31:16]}, buf_a_wide[256 - 2 * 16 +: 16]};

-		else if (shift_wide_a)

-			buf_a_wide <= {buf_a_wide[256-(16+1):0], buf_a_wide[256-16+:16]};

-		

-		

-		//

-		// Multiplier Array

-		//

-	wire	mac_inhibit;			// control signal to pause all accumulators

-	

-	wire	[46: 0]	mac[0:15];	// outputs of all accumulators

-	reg	[15: 0]	mac_clear;	// individual per-accumulator clear flag

-	

-	assign mac_inhibit = ~enable_mac_ab;

-	

-	always @(posedge clk)

-		//

-		if (!clear_mac_ab)

-			mac_clear <= {16{1'b1}};

-		else begin

-		

-			if (mac_clear == {16{1'b1}})

-				mac_clear <= {{14{1'b0}}, 1'b1, {1{1'b0}}};

-			else

-				mac_clear <= (mac_clear[15] == 1'b0) ? {mac_clear[14:0], 1'b0} : {16{1'b1}};

-				

-		

-		end

-	

-		//

-		// Array of parallel multipliers

-		//

-	genvar i;

-	generate for (i=0; i<16; i=i+1)

-		begin : gen_mac_array

-			//

-			mac16_wrapper mac16_inst

-			(

-				.clk		(clk),

-				.ce		(~mac_inhibit),

-				

-				.clr		(mac_clear[i]),

-				

-				.a			(buf_a_wide[16*i+:16]),

-				.b			(index_b_ff ? b_din[15:0] : b_din[31:16]),

-				.s			(mac[i])

-			);

-			//

-		end

-	endgenerate

-	

-		//

-		// Intermediate Words

-		//

-	reg	[47*(2*OPERAND_NUM_WORDS-1)-1:0]	si_msb;

-	reg	[47*(2*OPERAND_NUM_WORDS-0)-1:0]	si_lsb;

-	

-	

-	wire	[47*(2*OPERAND_NUM_WORDS-1)-1:0]	si_msb_new;

-	wire	[47*(2*OPERAND_NUM_WORDS-0)-1:0]	si_lsb_new;

-

-	generate for (i=0; i<16; i=i+1)

-		begin : gen_si_lsb_new

-			assign si_lsb_new[47*i+:47] = mac[15-i];

-		end

-	endgenerate

-	

-	generate for (i=1; i<16; i=i+1)

-		begin : gen_si_msb_new

-			assign si_msb_new[47*(15-i)+:47] = mac_clear[i] ? mac[i] : si_msb[47*(15-i)+:47];

-		end

-	endgenerate

-	

-	always @(posedge clk) begin

-		//

-		if (shift_si) begin

-			si_msb <= {{2*47{1'b0}}, si_msb[15*47-1:2*47]};

-			si_lsb <= {si_msb[2*47-1:0], si_lsb[16*47-1:2*47]};

-		end else begin

-		

-			if (store_si_msb)

-				si_msb <= si_msb_new;

-			

-			if (store_si_lsb)

-				si_lsb <= si_lsb_new;

-		end

-			

-	end

-	

-				

-		//

-		// Accumulators

-		//

-	wire	[46: 0]	add47_cw0_s;

-	wire	[46: 0]	add47_cw1_s;

-	

-	

-		//

-		// cw0, b, cw1, b

-		//

-	reg	[30: 0]	si_prev_dly;

-	reg	[15: 0]	si_next_dly;

-	

-	always @(posedge clk)

-		//

-		if (shift_si)

-			si_prev_dly <= si_lsb[93:63];

-		else

-			si_prev_dly <= {31{1'b0}};

-			

-	always @(posedge clk)

-		//

-		si_next_dly <= si_lsb[62:47];

-	

-	wire	[46: 0]	add47_cw0_a = si_lsb[46:0];

-	wire	[46: 0]	add47_cw0_b = {{16{1'b0}}, si_prev_dly};

-	

-	wire	[46: 0]	add47_cw1_a = add47_cw0_s;

-	wire	[46: 0]	add47_cw1_b = {{15{1'b0}}, si_next_dly, mask_cw1_sum ? {16{1'b0}} : {1'b0, add47_cw1_s[46:32]}};	

-	

-	adder47_wrapper add47_cw0_inst

-	(

-		.clk	(clk),

-		.a		(add47_cw0_a),

-		.b		(add47_cw0_b),

-		.s		(add47_cw0_s)

-	);

-	

-	adder47_wrapper add47_cw1_inst

-	(

-		.clk	(clk),

-		.a		(add47_cw1_a),

-		.b		(add47_cw1_b),

-		.s		(add47_cw1_s)

-	);

-	

-	

-	

-		//

-		// Full-Size Product

-		//

-	reg	[WORD_COUNTER_WIDTH:0]	bram_c_addr;

-	

-	wire	[WORD_COUNTER_WIDTH:0]	reduce_c_addr;

-	wire	[                31:0]	reduce_c_word;

-	

-	always @(posedge clk)

-		//

-		if (store_c_word)

-			bram_c_addr <= bram_c_addr + 1'b1;

-		else

-			bram_c_addr <= {2*WORD_COUNTER_WIDTH{1'b0}};

-	

-	bram_1rw_1ro_readfirst #

-	(

-		.MEM_WIDTH			(32),

-		.MEM_ADDR_BITS		(WORD_COUNTER_WIDTH + 1)

-	)

-	bram_c_inst

-	(

-		.clk		(clk),

-

-		.a_addr	(bram_c_addr),

-		.a_wr		(store_c_word),

-		.a_in		(add47_cw1_s[31:0]),

-		.a_out	(),

-

-		.b_addr	(reduce_c_addr),

-		.b_out	(reduce_c_word)

-	);

-	

-	

-		//

-		// Reduction Stage

-		//

-	modular_reductor_256 reduce_256_inst

-	(

-		.clk		(clk),

-		.rst_n	(rst_n),

-		

-		.ena		(reduce_start),

-		.rdy		(reduce_done),

-		

-		.x_addr	(reduce_c_addr),

-		.n_addr	(n_addr),

-		.p_addr	(p_addr),

-		.p_wren	(p_wren),

-		

-		.x_din	(reduce_c_word),

-		.n_din	(n_din),

-		.p_dout	(p_dout)

-	);

-	

-		

-endmodule

-

-

-//------------------------------------------------------------------------------

-// End-of-File

-//------------------------------------------------------------------------------

diff --git a/rtl/modular/modular_reductor_256.v b/rtl/modular/modular_reductor_256.v
deleted file mode 100644
index e4b346a..0000000
--- a/rtl/modular/modular_reductor_256.v
+++ /dev/null
@@ -1,692 +0,0 @@
-//------------------------------------------------------------------------------

-//

-// modular_reductor_256.v

-// -----------------------------------------------------------------------------

-// Modular reductor.

-//

-// Authors: Pavel Shatov

-//

-// Copyright (c) 2015-2016, NORDUnet A/S

-//

-// Redistribution and use in source and binary forms, with or without

-// modification, are permitted provided that the following conditions are met:

-//

-// - Redistributions of source code must retain the above copyright notice,

-//   this list of conditions and the following disclaimer.

-//

-// - Redistributions in binary form must reproduce the above copyright notice,

-//   this list of conditions and the following disclaimer in the documentation

-//   and/or other materials provided with the distribution.

-//

-// - Neither the name of the NORDUnet nor the names of its contributors may be

-//   used to endorse or promote products derived from this software without

-//   specific prior written permission.

-//

-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"

-// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

-// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

-// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE

-// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

-// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

-// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

-// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN

-// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

-// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

-// POSSIBILITY OF SUCH DAMAGE.

-//

-//------------------------------------------------------------------------------

-

-module modular_reductor_256

-	(

-		clk, rst_n,

-		ena, rdy,

-		x_addr, n_addr, p_addr, p_wren,

-		x_din, n_din, p_dout

-	);

-		

-		//

-		// Constants

-		//

-	localparam	OPERAND_NUM_WORDS		= 8;

-	localparam	WORD_COUNTER_WIDTH	= 3;

-	

-	

-		//

-		// Handy Numbers

-		//

-	localparam	[WORD_COUNTER_WIDTH:0]	WORD_INDEX_ZERO	= 0;

-	localparam	[WORD_COUNTER_WIDTH:0]	WORD_INDEX_LAST	= 2 * OPERAND_NUM_WORDS - 1;

-	

-	

-		//

-		// Handy Functions

-		//

-	function	[WORD_COUNTER_WIDTH:0]	WORD_INDEX_PREVIOUS_OR_LAST;

-		input	[WORD_COUNTER_WIDTH:0]	WORD_INDEX_CURRENT;

-		begin

-			WORD_INDEX_PREVIOUS_OR_LAST = (WORD_INDEX_CURRENT > WORD_INDEX_ZERO) ?

-				WORD_INDEX_CURRENT - 1'b1 : WORD_INDEX_LAST;

-		end

-	endfunction

-	

-	

-		//

-		// Ports

-		//

-	input		wire										clk;		// system clock

-	input		wire										rst_n;	// active-low async reset

-	

-	input		wire										ena;		// enable input

-	output	wire										rdy;		// ready output

-	

-	output	wire	[WORD_COUNTER_WIDTH-0:0]	x_addr;	// index of current X word

-	output	wire	[WORD_COUNTER_WIDTH-1:0]	n_addr;	// index of current N word

-	output	wire	[WORD_COUNTER_WIDTH-1:0]	p_addr;	// index of current P word

-	output	wire										p_wren;	// store current P word now	

-	

-	input		wire	[                  31:0]	x_din;	// X

-	input		wire	[                  31:0]	n_din;	// N (must be P-256!)

-	output	wire	[                  31:0]	p_dout;	// P = X mod N

-	

-	

-		//

-		// Word Indices

-		//

-	reg	[WORD_COUNTER_WIDTH:0]	index_x;

-	

-		

-		/* map registers to output ports */

-	assign x_addr	= index_x;

-	

-	

-		//

-		// FSM

-		//

-	localparam	FSM_SHREG_WIDTH	= (2 * OPERAND_NUM_WORDS + 1) + (5 * 2) + 1;

-	

-	reg	[FSM_SHREG_WIDTH-1:0]	fsm_shreg;

-	

-	assign rdy = fsm_shreg[0];

-	

-	wire [2 * OPERAND_NUM_WORDS - 1:0]	fsm_shreg_inc_index_x	= fsm_shreg[FSM_SHREG_WIDTH - 0*OPERAND_NUM_WORDS - 1 -: 2 * OPERAND_NUM_WORDS];

-	wire [2 * OPERAND_NUM_WORDS - 1:0]	fsm_shreg_store_word_z	= fsm_shreg[FSM_SHREG_WIDTH - 0*OPERAND_NUM_WORDS - 2 -: 2 * OPERAND_NUM_WORDS];

-	wire [2 *                 5 - 1:0]	fsm_shreg_reduce_stages	= fsm_shreg[                                        1 +: 2 *                 5];

-	

-	wire [5-1:0] fsm_shreg_reduce_stage_start;

-	wire [5-1:0] fsm_shreg_reduce_stage_stop;

-	

-	genvar s;

-	generate for (s=0; s<5; s=s+1)

-		begin : gen_fsm_shreg_reduce_stages

-			assign fsm_shreg_reduce_stage_start[5 - (s + 1)]	= fsm_shreg_reduce_stages[2 * (5 - s) - 1];

-			assign fsm_shreg_reduce_stage_stop[5 - (s + 1)]	= fsm_shreg_reduce_stages[2 * (5 - s) - 2];

-		end

-	endgenerate

-	

-	wire inc_index_x	= |fsm_shreg_inc_index_x;

-	wire store_word_z	= |fsm_shreg_store_word_z;

-	wire reduce_start	= |fsm_shreg_reduce_stage_start;

-	wire reduce_stop	= |fsm_shreg_reduce_stage_stop;

-	wire store_p		=  fsm_shreg_reduce_stage_stop[0];

-	

-	

-	wire	reduce_adder0_done;

-	wire	reduce_adder1_done;

-	wire	reduce_subtractor_done;

-	

-	wire	reduce_done_all = reduce_adder0_done & reduce_adder1_done & reduce_subtractor_done;

-	

-	always @(posedge clk or negedge rst_n)

-		//

-		if (rst_n == 1'b0)

-			//

-			fsm_shreg <= {{FSM_SHREG_WIDTH-1{1'b0}}, 1'b1};

-			//

-		else begin

-			//

-			if (rdy)

-				//

-				fsm_shreg <= {ena, {FSM_SHREG_WIDTH-2{1'b0}}, ~ena};

-			//

-			else if (!reduce_stop || reduce_done_all)

-				//

-				fsm_shreg <= {1'b0, fsm_shreg[FSM_SHREG_WIDTH-1:1]};

-			//

-		end

-	

-		

-		//

-		// Word Index Increment Logic

-		//

-	always @(posedge clk)

-		//

-		if (rdy)

-			//

-			index_x <= WORD_INDEX_LAST;

-			//

-		else if (inc_index_x)

-			//

-			index_x	<= WORD_INDEX_PREVIOUS_OR_LAST(index_x);

-			

-			

-		//

-		// Look-up Table

-		//

-		

-		//

-		// Take a look at the corresponding C model for more information

-		// on how exactly the math behind reduction works. The first step

-		// is to assemble nine 256-bit values ("z-words") from 32-bit parts

-		// of the full 512-bit product ("c-word"). The problem with z5 is

-		// that it contains c13 two times. This implementation scans from

-		// c15 to c0 and writes current part of c-word into corresponding

-		// parts of z-words. Since those 32-bit parts are stored in block

-		// memories, one source word can only be written to one location in

-		// every z-word at a time. The trick is to delay c13 and then write

-		// the delayed value at the corresponding location in z5 instead of

-		// the next c12. "z_save" flag is used to indicate that the current

-		// word should be delayed and written once again during the next cycle.

-		//

-		

-	reg	[9*WORD_COUNTER_WIDTH-1:0]	z_addr;	//

-	reg	[9                   -1:0]	z_wren;	//

-	reg	[9                   -1:0]	z_mask;	// mask input to store zero word

-	reg	[9                   -1:0]	z_save;	// save previous word once again

-	

-	always @(posedge clk)

-		//

-		if (inc_index_x)

-			//

-			case (index_x)

-				//

-				//                     s9     s8     s7     s6     s5     s4     s3     s2     s1

-				//                     ||     ||     ||     ||     ||     ||     ||     ||     ||

-				4'd00:	z_addr <= {3'dxx, 3'dxx, 3'dxx, 3'dxx, 3'dxx, 3'dxx, 3'dxx, 3'dxx, 3'd00};

-				4'd01:	z_addr <= {3'dxx, 3'dxx, 3'dxx, 3'dxx, 3'dxx, 3'dxx, 3'dxx, 3'dxx, 3'd01};

-				4'd02:	z_addr <= {3'dxx, 3'dxx, 3'dxx, 3'dxx, 3'dxx, 3'dxx, 3'dxx, 3'dxx, 3'd02};

-				4'd03:	z_addr <= {3'dxx, 3'dxx, 3'dxx, 3'dxx, 3'dxx, 3'dxx, 3'dxx, 3'dxx, 3'd03};

-				4'd04:	z_addr <= {3'dxx, 3'dxx, 3'dxx, 3'dxx, 3'dxx, 3'dxx, 3'dxx, 3'dxx, 3'd04};

-				4'd05:	z_addr <= {3'dxx, 3'dxx, 3'dxx, 3'dxx, 3'dxx, 3'dxx, 3'dxx, 3'dxx, 3'd05};

-				4'd06:	z_addr <= {3'dxx, 3'dxx, 3'dxx, 3'dxx, 3'dxx, 3'dxx, 3'dxx, 3'dxx, 3'd06};

-				4'd07:	z_addr <= {3'dxx, 3'dxx, 3'dxx, 3'dxx, 3'dxx, 3'dxx, 3'dxx, 3'dxx, 3'd07};

-				4'd08:	z_addr <= {3'd02, 3'd03, 3'd04, 3'd06, 3'd07, 3'd00, 3'd00, 3'd00, 3'dxx};

-				4'd09:	z_addr <= {3'd03, 3'd04, 3'd06, 3'd03, 3'd00, 3'd01, 3'd01, 3'd01, 3'dxx};

-				4'd10:	z_addr <= {3'd04, 3'd05, 3'd05, 3'd07, 3'd01, 3'd02, 3'd02, 3'd02, 3'dxx};

-				4'd11:	z_addr <= {3'd05, 3'd06, 3'd07, 3'd00, 3'd02, 3'd03, 3'd07, 3'd03, 3'dxx};

-				4'd12:	z_addr <= {3'd06, 3'd07, 3'd00, 3'd01, 3'd06, 3'd04, 3'd03, 3'd04, 3'dxx};

-				4'd13:	z_addr <= {3'd07, 3'd00, 3'd01, 3'd02, 3'd03, 3'd05, 3'd04, 3'd05, 3'dxx};

-				4'd14:	z_addr <= {3'd00, 3'd01, 3'd02, 3'd04, 3'd04, 3'd06, 3'd05, 3'd06, 3'dxx};

-				4'd15:	z_addr <= {3'd01, 3'd02, 3'd03, 3'd05, 3'd05, 3'd07, 3'd06, 3'd07, 3'dxx};

-				//

-            default:	z_addr <= {9*WORD_COUNTER_WIDTH{1'bX}};

-				//

-         endcase

-	

-	always @(posedge clk)

-		//

-		case (index_x)

-			//

-			//                     9     8     7     6     5     4     3     2     1

-			//                     |     |     |     |     |     |     |     |     |

-			4'd00:	z_wren <= {1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b1};

-			4'd01:	z_wren <= {1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b1};

-			4'd02:	z_wren <= {1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b1};

-			4'd03:	z_wren <= {1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b1};

-			4'd04:	z_wren <= {1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b1};

-			4'd05:	z_wren <= {1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b1};

-			4'd06:	z_wren <= {1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b1};

-			4'd07:	z_wren <= {1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b1};

-			4'd08:	z_wren <= {1'b1, 1'b1, 1'b1, 1'b1, 1'b1, 1'b1, 1'b1, 1'b1, 1'b0};

-			4'd09:	z_wren <= {1'b1, 1'b1, 1'b1, 1'b1, 1'b1, 1'b1, 1'b1, 1'b1, 1'b0};

-			4'd10:	z_wren <= {1'b1, 1'b1, 1'b1, 1'b1, 1'b1, 1'b1, 1'b1, 1'b1, 1'b0};

-			4'd11:	z_wren <= {1'b1, 1'b1, 1'b1, 1'b1, 1'b1, 1'b1, 1'b1, 1'b1, 1'b0};

-			4'd12:	z_wren <= {1'b1, 1'b1, 1'b1, 1'b1, 1'b1, 1'b1, 1'b1, 1'b1, 1'b0};

-			4'd13:	z_wren <= {1'b1, 1'b1, 1'b1, 1'b1, 1'b1, 1'b1, 1'b1, 1'b1, 1'b0};

-			4'd14:	z_wren <= {1'b1, 1'b1, 1'b1, 1'b1, 1'b1, 1'b1, 1'b1, 1'b1, 1'b0};

-			4'd15:	z_wren <= {1'b1, 1'b1, 1'b1, 1'b1, 1'b1, 1'b1, 1'b1, 1'b1, 1'b0};

-			//

-			default:	z_wren <= {9{1'b0}};

-			//

-		endcase

-		

-	always @(posedge clk)

-		//

-		if (inc_index_x)

-			//

-			case (index_x)

-				//

-				//                     9     8     7     6     5     4     3     2     1

-				//                     |     |     |     |     |     |     |     |     |

-				4'd00:	z_mask <= {1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0};

-				4'd01:	z_mask <= {1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0};

-				4'd02:	z_mask <= {1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0};

-				4'd03:	z_mask <= {1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0};

-				4'd04:	z_mask <= {1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0};

-				4'd05:	z_mask <= {1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0};

-				4'd06:	z_mask <= {1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0};

-				4'd07:	z_mask <= {1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0};

-				4'd08:	z_mask <= {1'b1, 1'b0, 1'b1, 1'b0, 1'b0, 1'b0, 1'b1, 1'b1, 1'b0};

-				4'd09:	z_mask <= {1'b0, 1'b0, 1'b0, 1'b1, 1'b0, 1'b0, 1'b1, 1'b1, 1'b0};

-				4'd10:	z_mask <= {1'b0, 1'b0, 1'b1, 1'b0, 1'b0, 1'b0, 1'b1, 1'b1, 1'b0};

-				4'd11:	z_mask <= {1'b0, 1'b1, 1'b0, 1'b0, 1'b0, 1'b1, 1'b1, 1'b0, 1'b0};

-				4'd12:	z_mask <= {1'b1, 1'b0, 1'b0, 1'b0, 1'b0, 1'b1, 1'b0, 1'b0, 1'b0};

-				4'd13:	z_mask <= {1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b1, 1'b0, 1'b0, 1'b0};

-				4'd14:	z_mask <= {1'b0, 1'b0, 1'b0, 1'b1, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0};

-				4'd15:	z_mask <= {1'b0, 1'b0, 1'b0, 1'b1, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0};

-				//

-            default:	z_mask <= {9{1'bX}};

-				//

-         endcase

-			

-	always @(posedge clk)

-		//

-		if (inc_index_x)

-			//

-			case (index_x)

-				//

-				//                     9     8     7     6     5     4     3     2     1

-				//                     |     |     |     |     |     |     |     |     |

-				4'd00:	z_save <= {1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0};

-				4'd01:	z_save <= {1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0};

-				4'd02:	z_save <= {1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0};

-				4'd03:	z_save <= {1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0};

-				4'd04:	z_save <= {1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0};

-				4'd05:	z_save <= {1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0};

-				4'd06:	z_save <= {1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0};

-				4'd07:	z_save <= {1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0};

-				4'd08:	z_save <= {1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0};

-				4'd09:	z_save <= {1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0};

-				4'd10:	z_save <= {1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0};

-				4'd11:	z_save <= {1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0};

-				4'd12:	z_save <= {1'b0, 1'b0, 1'b0, 1'b0, 1'b1, 1'b0, 1'b0, 1'b0, 1'b0};

-				4'd13:	z_save <= {1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0};

-				4'd14:	z_save <= {1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0};

-				4'd15:	z_save <= {1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0, 1'b0};

-				//

-            default:	z_save <= {9{1'bX}};

-				//

-         endcase

-		

-		

-		//

-		// Intermediate Numbers

-		//

-	reg	[WORD_COUNTER_WIDTH-1:0]	reduce_z_addr[1:9];

-	wire	[                32-1:0]	reduce_z_dout[1:9];

-	

-	reg	[31: 0]	x_din_dly;

-	always @(posedge clk)

-		//

-		x_din_dly <= x_din;

-		

-	

-	genvar z;

-	generate for (z=1; z<=9; z=z+1)

-		//

-		begin : gen_z_bram

-			//

-			bram_1rw_1ro_readfirst # (.MEM_WIDTH(32), .MEM_ADDR_BITS(WORD_COUNTER_WIDTH))

-			bram_c_inst

-			(

-				.clk		(clk),

-

-				.a_addr	(z_addr[(z-1) * WORD_COUNTER_WIDTH +: WORD_COUNTER_WIDTH]),

-				.a_wr		(z_wren[z-1] & store_word_z),

-				.a_in		(z_mask[z-1] ? {32{1'b0}} : (z_save[z-1] ? x_din_dly : x_din)),

-				.a_out	(),

-

-				.b_addr	(reduce_z_addr[z]),

-				.b_out	(reduce_z_dout[z])

-			);

-			//

-		end

-		//

-	endgenerate

-		

-		

-		

-	

-	wire	[                32-1:0]	bram_sum0_wr_din;

-	wire	[WORD_COUNTER_WIDTH-1:0]	bram_sum0_wr_addr;

-	wire										bram_sum0_wr_wren;

-	

-	wire	[                32-1:0]	bram_sum1_wr_din;

-	wire	[WORD_COUNTER_WIDTH-1:0]	bram_sum1_wr_addr;

-	wire										bram_sum1_wr_wren;

-	

-	wire	[                32-1:0]	bram_diff_wr_din;

-	wire	[WORD_COUNTER_WIDTH-1:0]	bram_diff_wr_addr;

-	wire										bram_diff_wr_wren;

-	

-	wire	[                32-1:0]	bram_sum0_rd_dout;

-	reg	[WORD_COUNTER_WIDTH-1:0]	bram_sum0_rd_addr;

-	

-	wire	[                32-1:0]	bram_sum1_rd_dout;

-	reg	[WORD_COUNTER_WIDTH-1:0]	bram_sum1_rd_addr;

-

-	wire	[                32-1:0]	bram_diff_rd_dout;

-	reg	[WORD_COUNTER_WIDTH-1:0]	bram_diff_rd_addr;

-

-	

-	bram_1rw_1ro_readfirst # (.MEM_WIDTH(32), .MEM_ADDR_BITS(WORD_COUNTER_WIDTH))

-	bram_sum0_inst

-	(

-		.clk		(clk),

-

-		.a_addr	(bram_sum0_wr_addr),

-		.a_wr		(bram_sum0_wr_wren),

-		.a_in		(bram_sum0_wr_din),

-		.a_out	(),

-

-		.b_addr	(bram_sum0_rd_addr),

-		.b_out	(bram_sum0_rd_dout)

-	);

-	

-	bram_1rw_1ro_readfirst # (.MEM_WIDTH(32), .MEM_ADDR_BITS(WORD_COUNTER_WIDTH))

-	bram_sum1_inst

-	(

-		.clk		(clk),

-

-		.a_addr	(bram_sum1_wr_addr),

-		.a_wr		(bram_sum1_wr_wren),

-		.a_in		(bram_sum1_wr_din),

-		.a_out	(),

-

-		.b_addr	(bram_sum1_rd_addr),

-		.b_out	(bram_sum1_rd_dout)

-	);

-	

-	bram_1rw_1ro_readfirst # (.MEM_WIDTH(32), .MEM_ADDR_BITS(WORD_COUNTER_WIDTH))

-	bram_diff_inst

-	(

-		.clk		(clk),

-

-		.a_addr	(bram_diff_wr_addr),

-		.a_wr		(bram_diff_wr_wren),

-		.a_in		(bram_diff_wr_din),

-		.a_out	(),

-

-		.b_addr	(bram_diff_rd_addr),

-		.b_out	(bram_diff_rd_dout)

-	);

-	

-	

-	wire	[WORD_COUNTER_WIDTH-1:0]	adder0_ab_addr;

-	wire	[WORD_COUNTER_WIDTH-1:0]	adder1_ab_addr;

-	wire	[WORD_COUNTER_WIDTH-1:0]	subtractor_ab_addr;

-	

-	reg	[                32-1:0]	adder0_a_din;

-	reg	[                32-1:0]	adder0_b_din;

-	

-	reg	[                32-1:0]	adder1_a_din;

-	reg	[                32-1:0]	adder1_b_din;

-	

-	reg	[                32-1:0]	subtractor_a_din;

-	reg	[                32-1:0]	subtractor_b_din;

-	

-	// n_addr - only 1 output, because all modules are in sync

-	

-	modular_adder #

-	(

-		.OPERAND_NUM_WORDS	(OPERAND_NUM_WORDS),

-		.WORD_COUNTER_WIDTH	(WORD_COUNTER_WIDTH)

-	)

-	adder_inst0

-	(

-		.clk			(clk),

-		.rst_n		(rst_n),

-		

-		.ena			(reduce_start),

-		.rdy			(reduce_adder0_done),

-		

-		.ab_addr		(adder0_ab_addr),

-		.n_addr		(),

-		.s_addr		(bram_sum0_wr_addr),

-		.s_wren		(bram_sum0_wr_wren),

-		

-		.a_din		(adder0_a_din),

-		.b_din		(adder0_b_din),

-		.n_din		(n_din),

-		.s_dout		(bram_sum0_wr_din)

-	);

-	

-	modular_adder #

-	(

-		.OPERAND_NUM_WORDS	(OPERAND_NUM_WORDS),

-		.WORD_COUNTER_WIDTH	(WORD_COUNTER_WIDTH)

-	)

-	adder_inst1

-	(

-		.clk			(clk),

-		.rst_n		(rst_n),

-		

-		.ena			(reduce_start),

-		.rdy			(reduce_adder1_done),

-		

-		.ab_addr		(adder1_ab_addr),

-		.n_addr		(),

-		.s_addr		(bram_sum1_wr_addr),

-		.s_wren		(bram_sum1_wr_wren),

-		

-		.a_din		(adder1_a_din),

-		.b_din		(adder1_b_din),

-		.n_din		(n_din),

-		.s_dout		(bram_sum1_wr_din)

-	);

-	

-	modular_subtractor #

-	(

-		.OPERAND_NUM_WORDS	(OPERAND_NUM_WORDS),

-		.WORD_COUNTER_WIDTH	(WORD_COUNTER_WIDTH)

-	)

-	subtractor_inst

-	(

-		.clk			(clk),

-		.rst_n		(rst_n),

-		

-		.ena			(reduce_start),

-		.rdy			(reduce_subtractor_done),

-		

-		.ab_addr		(subtractor_ab_addr),

-		.n_addr		(n_addr),

-		.d_addr		(bram_diff_wr_addr),

-		.d_wren		(bram_diff_wr_wren),

-		

-		.a_din		(subtractor_a_din),

-		.b_din		(subtractor_b_din),

-		.n_din		(n_din),

-		.d_dout		(bram_diff_wr_din)

-	);

-	

-	

-		//

-		// Address (Operand) Selector

-		//

-	always @(*)

-		//

-		case (fsm_shreg_reduce_stage_stop)

-			//

-			5'b10000: begin

-				reduce_z_addr[1]	= {WORD_COUNTER_WIDTH{1'bX}};

-				reduce_z_addr[2]	= adder0_ab_addr;

-				reduce_z_addr[3]	= adder1_ab_addr;

-				reduce_z_addr[4]	= {WORD_COUNTER_WIDTH{1'bX}};

-				reduce_z_addr[5]	= {WORD_COUNTER_WIDTH{1'bX}};

-				reduce_z_addr[6]	= subtractor_ab_addr;

-				reduce_z_addr[7]	= {WORD_COUNTER_WIDTH{1'bX}};

-				reduce_z_addr[8]	= {WORD_COUNTER_WIDTH{1'bX}};

-				reduce_z_addr[9]	= {WORD_COUNTER_WIDTH{1'bX}};

-				bram_sum0_rd_addr	= {WORD_COUNTER_WIDTH{1'bX}};

-				bram_sum1_rd_addr	= {WORD_COUNTER_WIDTH{1'bX}};

-				bram_diff_rd_addr = {WORD_COUNTER_WIDTH{1'bX}};

-			end

-			//

-			5'b01000: begin

-				reduce_z_addr[1]	= adder0_ab_addr;

-				reduce_z_addr[2]	= {WORD_COUNTER_WIDTH{1'bX}};

-				reduce_z_addr[3]	= {WORD_COUNTER_WIDTH{1'bX}};

-				reduce_z_addr[4]	= adder1_ab_addr;

-				reduce_z_addr[5]	= {WORD_COUNTER_WIDTH{1'bX}};

-				reduce_z_addr[6]	= {WORD_COUNTER_WIDTH{1'bX}};

-				reduce_z_addr[7]	= subtractor_ab_addr;

-				reduce_z_addr[8]	= {WORD_COUNTER_WIDTH{1'bX}};

-				reduce_z_addr[9]	= {WORD_COUNTER_WIDTH{1'bX}};

-				bram_sum0_rd_addr	= adder0_ab_addr;

-				bram_sum1_rd_addr	= adder1_ab_addr;

-				bram_diff_rd_addr = subtractor_ab_addr;

-			end

-			//

-			5'b00100: begin

-				reduce_z_addr[1]	= {WORD_COUNTER_WIDTH{1'bX}};

-				reduce_z_addr[2]	= {WORD_COUNTER_WIDTH{1'bX}};

-				reduce_z_addr[3]	= {WORD_COUNTER_WIDTH{1'bX}};

-				reduce_z_addr[4]	= {WORD_COUNTER_WIDTH{1'bX}};

-				reduce_z_addr[5]	= adder0_ab_addr;

-				reduce_z_addr[6]	= {WORD_COUNTER_WIDTH{1'bX}};

-				reduce_z_addr[7]	= {WORD_COUNTER_WIDTH{1'bX}};

-				reduce_z_addr[8]	= subtractor_ab_addr;

-				reduce_z_addr[9]	= {WORD_COUNTER_WIDTH{1'bX}};

-				bram_sum0_rd_addr	= adder0_ab_addr;

-				bram_sum1_rd_addr	= adder1_ab_addr;

-				bram_diff_rd_addr = subtractor_ab_addr;

-			end

-			//

-			5'b00010: begin

-				reduce_z_addr[1]	= {WORD_COUNTER_WIDTH{1'bX}};

-				reduce_z_addr[2]	= {WORD_COUNTER_WIDTH{1'bX}};

-				reduce_z_addr[3]	= {WORD_COUNTER_WIDTH{1'bX}};

-				reduce_z_addr[4]	= {WORD_COUNTER_WIDTH{1'bX}};

-				reduce_z_addr[5]	= {WORD_COUNTER_WIDTH{1'bX}};

-				reduce_z_addr[6]	= {WORD_COUNTER_WIDTH{1'bX}};

-				reduce_z_addr[7]	= {WORD_COUNTER_WIDTH{1'bX}};

-				reduce_z_addr[8]	= {WORD_COUNTER_WIDTH{1'bX}};

-				reduce_z_addr[9]	= subtractor_ab_addr;

-				bram_sum0_rd_addr	= adder0_ab_addr;

-				bram_sum1_rd_addr	= adder0_ab_addr;

-				bram_diff_rd_addr = subtractor_ab_addr;

-			end

-			//

-			5'b00001: begin

-				reduce_z_addr[1]	= {WORD_COUNTER_WIDTH{1'bX}};

-				reduce_z_addr[2]	= {WORD_COUNTER_WIDTH{1'bX}};

-				reduce_z_addr[3]	= {WORD_COUNTER_WIDTH{1'bX}};

-				reduce_z_addr[4]	= {WORD_COUNTER_WIDTH{1'bX}};

-				reduce_z_addr[5]	= {WORD_COUNTER_WIDTH{1'bX}};

-				reduce_z_addr[6]	= {WORD_COUNTER_WIDTH{1'bX}};

-				reduce_z_addr[7]	= {WORD_COUNTER_WIDTH{1'bX}};

-				reduce_z_addr[8]	= {WORD_COUNTER_WIDTH{1'bX}};

-				reduce_z_addr[9]	= {WORD_COUNTER_WIDTH{1'bX}};

-				bram_sum0_rd_addr	= adder0_ab_addr;

-				bram_sum1_rd_addr	= {WORD_COUNTER_WIDTH{1'bX}};

-				bram_diff_rd_addr = adder0_ab_addr;

-			end			

-			//

-			default: begin

-				reduce_z_addr[1]	= {WORD_COUNTER_WIDTH{1'bX}};

-				reduce_z_addr[2]	= {WORD_COUNTER_WIDTH{1'bX}};

-				reduce_z_addr[3]	= {WORD_COUNTER_WIDTH{1'bX}};

-				reduce_z_addr[4]	= {WORD_COUNTER_WIDTH{1'bX}};

-				reduce_z_addr[5]	= {WORD_COUNTER_WIDTH{1'bX}};

-				reduce_z_addr[6]	= {WORD_COUNTER_WIDTH{1'bX}};

-				reduce_z_addr[7]	= {WORD_COUNTER_WIDTH{1'bX}};

-				reduce_z_addr[8]	= {WORD_COUNTER_WIDTH{1'bX}};

-				reduce_z_addr[9]	= {WORD_COUNTER_WIDTH{1'bX}};

-				bram_sum0_rd_addr	= {WORD_COUNTER_WIDTH{1'bX}};

-				bram_sum1_rd_addr	= {WORD_COUNTER_WIDTH{1'bX}};

-				bram_diff_rd_addr = {WORD_COUNTER_WIDTH{1'bX}};

-			end

-			//

-		endcase

-

-	

-		//

-		// adder 0

-		//

-	always @(*) begin

-		//

-		case (fsm_shreg_reduce_stage_stop)

-			5'b10000:	adder0_a_din = reduce_z_dout[2];

-			5'b01000:	adder0_a_din = bram_sum0_rd_dout;

-			5'b00100:	adder0_a_din = bram_sum0_rd_dout;

-			5'b00010:	adder0_a_din = bram_sum0_rd_dout;

-			5'b00001:	adder0_a_din = bram_sum0_rd_dout;

-			default:		adder0_a_din = {32{1'bX}};

-		endcase

-		//

-		case (fsm_shreg_reduce_stage_stop)

-			5'b10000:	adder0_b_din = reduce_z_dout[2];

-			5'b01000:	adder0_b_din = reduce_z_dout[1];

-			5'b00100:	adder0_b_din = reduce_z_dout[5];

-			5'b00010:	adder0_b_din = bram_sum1_rd_dout;

-			5'b00001:	adder0_b_din = bram_diff_rd_dout;

-			default:		adder0_b_din = {32{1'bX}};

-		endcase

-		//

-	end

-	

-		//

-		// adder 1

-		//

-	always @(*) begin

-		//

-		case (fsm_shreg_reduce_stage_stop)

-			5'b10000:	adder1_a_din = reduce_z_dout[3];

-			5'b01000:	adder1_a_din = bram_sum1_rd_dout;

-			5'b00100:	adder1_a_din = bram_sum1_rd_dout;

-			5'b00010:	adder1_a_din = {32{1'bX}};

-			5'b00001:	adder1_a_din = {32{1'bX}};

-			default:		adder1_a_din = {32{1'bX}};

-		endcase

-		//

-		case (fsm_shreg_reduce_stage_stop)

-			5'b10000:	adder1_b_din = reduce_z_dout[3];

-			5'b01000:	adder1_b_din = reduce_z_dout[4];

-			5'b00100:	adder1_b_din = {32{1'b0}};

-			5'b00010:	adder1_b_din = {32{1'bX}};

-			5'b00001:	adder1_b_din = {32{1'bX}};

-			default:		adder1_b_din = {32{1'bX}};

-		endcase

-		//

-	end

-	

-	

-		//

-		// subtractor

-		//

-	always @(*) begin

-		//

-		case (fsm_shreg_reduce_stage_stop)

-			5'b10000:	subtractor_a_din = {32{1'b0}};

-			5'b01000:	subtractor_a_din = bram_diff_rd_dout;

-			5'b00100:	subtractor_a_din = bram_diff_rd_dout;

-			5'b00010:	subtractor_a_din = bram_diff_rd_dout;

-			5'b00001:	subtractor_a_din = {32{1'bX}};

-			default:		subtractor_a_din = {32{1'bX}};

-		endcase

-		//

-		case (fsm_shreg_reduce_stage_stop)

-			5'b10000:	subtractor_b_din = reduce_z_dout[6];

-			5'b01000:	subtractor_b_din = reduce_z_dout[7];

-			5'b00100:	subtractor_b_din = reduce_z_dout[8];

-			5'b00010:	subtractor_b_din = reduce_z_dout[9];

-			5'b00001:	subtractor_b_din = {32{1'bX}};

-			default:		subtractor_b_din = {32{1'bX}};

-		endcase

-		//

-	end

-

-

-		//

-		// Address Mapping

-		//

-	assign p_addr	= bram_sum0_wr_addr;

-	assign p_wren	= bram_sum0_wr_wren & store_p;

-	assign p_dout	= bram_sum0_wr_din;

-		

-		

-endmodule

-

-

-//------------------------------------------------------------------------------

-// End-of-File

-//------------------------------------------------------------------------------

diff --git a/rtl/modular/modular_subtractor.v b/rtl/modular/modular_subtractor.v
index 322aec4..1637f45 100644
--- a/rtl/modular/modular_subtractor.v
+++ b/rtl/modular/modular_subtractor.v
@@ -2,7 +2,7 @@
 //
 // modular_subtractor.v
 // -----------------------------------------------------------------------------
-// Modular subtractor.

+// Modular subtractor.
 //
 // Authors: Pavel Shatov
 //
@@ -34,259 +34,259 @@
 // ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 // POSSIBILITY OF SUCH DAMAGE.
 //
-//------------------------------------------------------------------------------

-

-module modular_subtractor

-	(

-		clk, rst_n,

-		ena, rdy,

-		ab_addr, n_addr, d_addr, d_wren,
-		a_din, b_din, n_din, d_dout

-	);

-

-

-		//

-		// Parameters

-		//

-	parameter	OPERAND_NUM_WORDS		= 8;

-	parameter	WORD_COUNTER_WIDTH	= 3;

-	

-	

-		//
-		// Handy Numbers
-		//
-	localparam	[WORD_COUNTER_WIDTH-1:0]	WORD_INDEX_ZERO	= 0;
-	localparam	[WORD_COUNTER_WIDTH-1:0]	WORD_INDEX_LAST	= OPERAND_NUM_WORDS - 1;

-	

-	

-		//
-		// Handy Functions
-		//
-	function	[WORD_COUNTER_WIDTH-1:0]	WORD_INDEX_NEXT_OR_ZERO;
-		input	[WORD_COUNTER_WIDTH-1:0]	WORD_INDEX_CURRENT;
-		begin
-			WORD_INDEX_NEXT_OR_ZERO = (WORD_INDEX_CURRENT < WORD_INDEX_LAST) ?
-				WORD_INDEX_CURRENT + 1'b1 : WORD_INDEX_ZERO;
-		end
-	endfunction

-	

-	

-		//
-		// Ports
-		//
-	input		wire										clk;			// system clock
-	input		wire										rst_n;		// active-low async reset
-	
-	input		wire										ena;			// enable input
-	output	wire										rdy;			// ready output
-	

-	output	wire	[WORD_COUNTER_WIDTH-1:0]	ab_addr;		// index of current A and B words

-	output	wire	[WORD_COUNTER_WIDTH-1:0]	n_addr;		// index of current N word

-	output	wire	[WORD_COUNTER_WIDTH-1:0]	d_addr;		// index of current D word

-	output	wire										d_wren;		// store current D word now

-	
-	input		wire	[                  31:0]	a_din;		// A
-	input		wire	[                  31:0]	b_din;		// B
-	input		wire	[                  31:0]	n_din;		// N
-	output	wire	[                  31:0]	d_dout;		// D = (A - B) mod N

-	

-	

-		//

-		// Word Indices

-		//

-	reg	[WORD_COUNTER_WIDTH-1:0]	index_ab;

-	reg	[WORD_COUNTER_WIDTH-1:0]	index_n;

-	reg	[WORD_COUNTER_WIDTH-1:0]	index_d;

-		

-		/* map registers to output ports */

-	assign ab_addr	= index_ab;

-	assign n_addr	= index_n;

-	assign d_addr	= index_d;

-

-

-		//

-		// Subtractor

-		//

-	wire	[31: 0]	sub32_d;

-	wire				sub32_b_in;

-	wire				sub32_b_out;

-	

-	subtractor32_wrapper subtractor32

-	(
-		.clk		(clk),
-		.a			(a_din),
-		.b			(b_din),
-		.d			(sub32_d),
-		.b_in		(sub32_b_in),
-		.b_out	(sub32_b_out)
-	);

-	

-	

-		//

-		// Adder

-		//

-	wire	[31: 0]	add32_s;

-	wire				add32_c_in;

-	wire				add32_c_out;

-	

-	adder32_wrapper adder32

-	(
-		.clk		(clk),
-		.a			(sub32_d),
-		.b			(n_din),
-		.s			(add32_s),
-		.c_in		(add32_c_in),
-		.c_out	(add32_c_out)
-	);

-	

-	

-		//

-		// FSM

-		//

-		

-	localparam FSM_SHREG_WIDTH = 2*OPERAND_NUM_WORDS + 5;

-	

-	reg	[FSM_SHREG_WIDTH-1:0]	fsm_shreg;

-	

-	assign rdy = fsm_shreg[0];

-	

-	wire [OPERAND_NUM_WORDS-1:0] fsm_shreg_inc_index_ab	= fsm_shreg[FSM_SHREG_WIDTH - (0 * OPERAND_NUM_WORDS + 1) : FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 0)];

-	wire [OPERAND_NUM_WORDS-1:0] fsm_shreg_inc_index_n		= fsm_shreg[FSM_SHREG_WIDTH - (0 * OPERAND_NUM_WORDS + 2) : FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 1)];

-	wire [OPERAND_NUM_WORDS-1:0] fsm_shreg_store_dif_ab	= fsm_shreg[FSM_SHREG_WIDTH - (0 * OPERAND_NUM_WORDS + 3) : FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 2)];

-	wire [OPERAND_NUM_WORDS-1:0] fsm_shreg_store_dif_ab_n	= fsm_shreg[FSM_SHREG_WIDTH - (0 * OPERAND_NUM_WORDS + 4) : FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 3)];

-	wire [OPERAND_NUM_WORDS-1:0] fsm_shreg_store_data_d	= fsm_shreg[FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 4) : FSM_SHREG_WIDTH - (2 * OPERAND_NUM_WORDS + 3)];

-	wire [OPERAND_NUM_WORDS-1:0] fsm_shreg_inc_index_d		= fsm_shreg[FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 5) : FSM_SHREG_WIDTH - (2 * OPERAND_NUM_WORDS + 4)];

-	

-	wire fsm_latch_msb_borrow	= fsm_shreg[FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 2)];

-	

-	wire inc_index_ab		= |fsm_shreg_inc_index_ab;

-	wire inc_index_n		= |fsm_shreg_inc_index_n;

-	wire store_dif_ab		= |fsm_shreg_store_dif_ab;

-	wire store_dif_ab_n	= |fsm_shreg_store_dif_ab_n;

-	wire store_data_d		= |fsm_shreg_store_data_d;

-	wire inc_index_d		= |fsm_shreg_inc_index_d;

-	

-	always @(posedge clk or negedge rst_n)
-		//
-		if (rst_n == 1'b0)

-			//

-			fsm_shreg <= {{FSM_SHREG_WIDTH-1{1'b0}}, 1'b1};

-			//

-		else begin

-			//

-			if (rdy)	fsm_shreg <= {ena, {FSM_SHREG_WIDTH-2{1'b0}}, ~ena};

-			//

-			else		fsm_shreg <= {1'b0, fsm_shreg[FSM_SHREG_WIDTH-1:1]};

-			//

-		end

-		

-	

-		//

-		// Borrow & Carry Masking Logic

-		//

-	reg	sub32_b_mask;

-	reg	add32_c_mask;

-	

-	

-	always @(posedge clk) begin

-		//

-		sub32_b_mask <= (index_ab == WORD_INDEX_ZERO) ? 1'b1 : 1'b0;

-		add32_c_mask <= (index_n  == WORD_INDEX_ZERO) ? 1'b1 : 1'b0;

-		//

-	end

-	

-	assign sub32_b_in = sub32_b_out & ~sub32_b_mask;	

-	assign add32_c_in = add32_c_out & ~add32_c_mask;

-	

-	

-	

-		//

-		// Borrow & Carry Latch Logic

-		//

-	reg sub32_borrow_latch;

-	

-	always @(posedge clk) begin

-		//

-		if (fsm_latch_msb_borrow) sub32_borrow_latch <= sub32_b_out;

-		//

-	end

-

-		

-		//

-		// Intermediate Results

-		//

-	reg	[32*OPERAND_NUM_WORDS-1:0]		d_ab;

-	reg	[32*OPERAND_NUM_WORDS-1:0]		d_ab_n;

-	

-	always @(posedge clk)

-		//

-		if (store_data_d) begin

-			//

-			d_ab		<= {{32{1'bX}}, d_ab[32*OPERAND_NUM_WORDS-1:32]};

-			d_ab_n	<= {{32{1'bX}}, d_ab_n[32*OPERAND_NUM_WORDS-1:32]};		

-			//

-		end else begin

-			//

-			if (store_dif_ab) d_ab <= {sub32_d, d_ab[32*OPERAND_NUM_WORDS-1:32]};

-			if (store_dif_ab_n) d_ab_n <= {add32_s, d_ab_n[32*OPERAND_NUM_WORDS-1:32]};

-			//

-		end

-	

-	

-		//
-		// Word Index Increment Logic
-		//

-	always @(posedge clk)
-		//

-		if (rdy) begin

-			//

-			index_ab		<= WORD_INDEX_ZERO;

-			index_n		<= WORD_INDEX_ZERO;

-			index_d		<= WORD_INDEX_ZERO;

-			//

-		end else begin

-			//

-			if (inc_index_ab) index_ab <= WORD_INDEX_NEXT_OR_ZERO(index_ab);

-			if (inc_index_n)	index_n	<= WORD_INDEX_NEXT_OR_ZERO(index_n);

-			if (inc_index_d)	index_d	<= WORD_INDEX_NEXT_OR_ZERO(index_d);

-			//

-		end

-	

-	

-			//

-			// Output Sum Selector

-			//

-	wire	mux_select_ab_n = sub32_borrow_latch;

-			

-	

-			//

-			// Output Data and Write Enable Logic

-			//

-	reg				d_wren_reg;

-	reg	[31: 0]	d_dout_reg;

-	wire	[31: 0]	d_dout_mux = mux_select_ab_n ? d_ab_n[31:0] : d_ab[31:0];

-	

-	assign d_wren = d_wren_reg;

-	assign d_dout = d_dout_reg;

-	

-	always @(posedge clk)
-		//

-		if (rdy) begin

-			//

-			d_wren_reg	<= 1'b0;

-			d_dout_reg	<= {32{1'bX}};

-			//

-		end else begin

-			//

-			d_wren_reg <= store_data_d;

-			d_dout_reg <= store_data_d ? d_dout_mux : {32{1'bX}};

-			//

-		end			

-

-	

-endmodule

-

-

+//------------------------------------------------------------------------------
+
+module modular_subtractor
+  (
+   clk, rst_n,
+   ena, rdy,
+   ab_addr, n_addr, d_addr, d_wren,
+   a_din, b_din, n_din, d_dout
+   );
+
+
+   //
+   // Parameters
+   //
+   parameter	OPERAND_NUM_WORDS	= 8;
+   parameter	WORD_COUNTER_WIDTH	= 3;
+
+
+   //
+   // Handy Numbers
+   //
+   localparam	[WORD_COUNTER_WIDTH-1:0]	WORD_INDEX_ZERO	= 0;
+   localparam	[WORD_COUNTER_WIDTH-1:0]	WORD_INDEX_LAST	= OPERAND_NUM_WORDS - 1;
+
+
+   //
+   // Handy Functions
+   //
+   function	[WORD_COUNTER_WIDTH-1:0]	WORD_INDEX_NEXT_OR_ZERO;
+      input	[WORD_COUNTER_WIDTH-1:0]	WORD_INDEX_CURRENT;
+      begin
+	 WORD_INDEX_NEXT_OR_ZERO = (WORD_INDEX_CURRENT < WORD_INDEX_LAST) ?
+				   WORD_INDEX_CURRENT + 1'b1 : WORD_INDEX_ZERO;
+      end
+   endfunction
+
+
+   //
+   // Ports
+   //
+   input		wire										clk;			// system clock
+   input		wire										rst_n;		// active-low async reset
+
+   input		wire										ena;			// enable input
+   output	wire 											rdy;			// ready output
+
+   output	wire [WORD_COUNTER_WIDTH-1:0] 								ab_addr;		// index of current A and B words
+   output	wire [WORD_COUNTER_WIDTH-1:0] 								n_addr;		// index of current N word
+   output	wire [WORD_COUNTER_WIDTH-1:0] 								d_addr;		// index of current D word
+   output	wire 											d_wren;		// store current D word now
+
+   input		wire [                  31:0] 							a_din;		// A
+   input		wire [                  31:0] 							b_din;		// B
+   input		wire [                  31:0] 							n_din;		// N
+   output	wire [                  31:0] 								d_dout;		// D = (A - B) mod N
+
+
+   //
+   // Word Indices
+   //
+   reg [WORD_COUNTER_WIDTH-1:0] 									index_ab;
+   reg [WORD_COUNTER_WIDTH-1:0] 									index_n;
+   reg [WORD_COUNTER_WIDTH-1:0] 									index_d;
+
+   /* map registers to output ports */
+   assign ab_addr	= index_ab;
+   assign n_addr	= index_n;
+   assign d_addr	= index_d;
+
+
+   //
+   // Subtractor
+   //
+   wire [31: 0] 											sub32_d;
+   wire 												sub32_b_in;
+   wire 												sub32_b_out;
+
+   subtractor32_wrapper subtractor32
+     (
+      .clk		(clk),
+      .a			(a_din),
+      .b			(b_din),
+      .d			(sub32_d),
+      .b_in		(sub32_b_in),
+      .b_out	(sub32_b_out)
+      );
+
+
+   //
+   // Adder
+   //
+   wire [31: 0] 											add32_s;
+   wire 												add32_c_in;
+   wire 												add32_c_out;
+
+   adder32_wrapper adder32
+     (
+      .clk		(clk),
+      .a			(sub32_d),
+      .b			(n_din),
+      .s			(add32_s),
+      .c_in		(add32_c_in),
+      .c_out	(add32_c_out)
+      );
+
+
+   //
+   // FSM
+   //
+
+   localparam FSM_SHREG_WIDTH = 2*OPERAND_NUM_WORDS + 5;
+
+   reg [FSM_SHREG_WIDTH-1:0] 										fsm_shreg;
+
+   assign rdy = fsm_shreg[0];
+
+   wire [OPERAND_NUM_WORDS-1:0] 									fsm_shreg_inc_index_ab	= fsm_shreg[FSM_SHREG_WIDTH - (0 * OPERAND_NUM_WORDS + 1) : FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 0)];
+   wire [OPERAND_NUM_WORDS-1:0] 									fsm_shreg_inc_index_n		= fsm_shreg[FSM_SHREG_WIDTH - (0 * OPERAND_NUM_WORDS + 2) : FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 1)];
+   wire [OPERAND_NUM_WORDS-1:0] 									fsm_shreg_store_dif_ab	= fsm_shreg[FSM_SHREG_WIDTH - (0 * OPERAND_NUM_WORDS + 3) : FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 2)];
+   wire [OPERAND_NUM_WORDS-1:0] 									fsm_shreg_store_dif_ab_n	= fsm_shreg[FSM_SHREG_WIDTH - (0 * OPERAND_NUM_WORDS + 4) : FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 3)];
+   wire [OPERAND_NUM_WORDS-1:0] 									fsm_shreg_store_data_d	= fsm_shreg[FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 4) : FSM_SHREG_WIDTH - (2 * OPERAND_NUM_WORDS + 3)];
+   wire [OPERAND_NUM_WORDS-1:0] 									fsm_shreg_inc_index_d		= fsm_shreg[FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 5) : FSM_SHREG_WIDTH - (2 * OPERAND_NUM_WORDS + 4)];
+
+   wire 												fsm_latch_msb_borrow	= fsm_shreg[FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 2)];
+
+   wire 												inc_index_ab		= |fsm_shreg_inc_index_ab;
+   wire 												inc_index_n		= |fsm_shreg_inc_index_n;
+   wire 												store_dif_ab		= |fsm_shreg_store_dif_ab;
+   wire 												store_dif_ab_n	= |fsm_shreg_store_dif_ab_n;
+   wire 												store_data_d		= |fsm_shreg_store_data_d;
+   wire 												inc_index_d		= |fsm_shreg_inc_index_d;
+
+   always @(posedge clk or negedge rst_n)
+     //
+     if (rst_n == 1'b0)
+       //
+       fsm_shreg <= {{FSM_SHREG_WIDTH-1{1'b0}}, 1'b1};
+   //
+     else begin
+	//
+	if (rdy)	fsm_shreg <= {ena, {FSM_SHREG_WIDTH-2{1'b0}}, ~ena};
+	//
+	else		fsm_shreg <= {1'b0, fsm_shreg[FSM_SHREG_WIDTH-1:1]};
+	//
+     end
+
+
+   //
+   // Borrow & Carry Masking Logic
+   //
+   reg	sub32_b_mask;
+   reg	add32_c_mask;
+
+
+   always @(posedge clk) begin
+      //
+      sub32_b_mask <= (index_ab == WORD_INDEX_ZERO) ? 1'b1 : 1'b0;
+      add32_c_mask <= (index_n  == WORD_INDEX_ZERO) ? 1'b1 : 1'b0;
+      //
+   end
+
+   assign sub32_b_in = sub32_b_out & ~sub32_b_mask;
+   assign add32_c_in = add32_c_out & ~add32_c_mask;
+
+
+
+   //
+   // Borrow & Carry Latch Logic
+   //
+   reg sub32_borrow_latch;
+
+   always @(posedge clk) begin
+      //
+      if (fsm_latch_msb_borrow) sub32_borrow_latch <= sub32_b_out;
+      //
+   end
+
+
+   //
+   // Intermediate Results
+   //
+   reg	[32*OPERAND_NUM_WORDS-1:0]		d_ab;
+   reg [32*OPERAND_NUM_WORDS-1:0] 		d_ab_n;
+
+   always @(posedge clk)
+     //
+     if (store_data_d) begin
+	//
+	d_ab		<= {{32{1'bX}}, d_ab[32*OPERAND_NUM_WORDS-1:32]};
+	d_ab_n	<= {{32{1'bX}}, d_ab_n[32*OPERAND_NUM_WORDS-1:32]};
+	//
+     end else begin
+	//
+	if (store_dif_ab) d_ab <= {sub32_d, d_ab[32*OPERAND_NUM_WORDS-1:32]};
+	if (store_dif_ab_n) d_ab_n <= {add32_s, d_ab_n[32*OPERAND_NUM_WORDS-1:32]};
+	//
+     end
+
+
+   //
+   // Word Index Increment Logic
+   //
+   always @(posedge clk)
+     //
+     if (rdy) begin
+	//
+	index_ab		<= WORD_INDEX_ZERO;
+	index_n		<= WORD_INDEX_ZERO;
+	index_d		<= WORD_INDEX_ZERO;
+	//
+     end else begin
+	//
+	if (inc_index_ab) index_ab <= WORD_INDEX_NEXT_OR_ZERO(index_ab);
+	if (inc_index_n)	index_n	<= WORD_INDEX_NEXT_OR_ZERO(index_n);
+	if (inc_index_d)	index_d	<= WORD_INDEX_NEXT_OR_ZERO(index_d);
+	//
+     end
+
+
+   //
+   // Output Sum Selector
+   //
+   wire	mux_select_ab_n = sub32_borrow_latch;
+
+
+   //
+   // Output Data and Write Enable Logic
+   //
+   reg 	d_wren_reg;
+   reg [31: 0] d_dout_reg;
+   wire [31: 0] d_dout_mux = mux_select_ab_n ? d_ab_n[31:0] : d_ab[31:0];
+
+   assign d_wren = d_wren_reg;
+   assign d_dout = d_dout_reg;
+
+   always @(posedge clk)
+     //
+     if (rdy) begin
+	//
+	d_wren_reg	<= 1'b0;
+	d_dout_reg	<= {32{1'bX}};
+	//
+     end else begin
+	//
+	d_wren_reg <= store_data_d;
+	d_dout_reg <= store_data_d ? d_dout_mux : {32{1'bX}};
+	//
+     end
+
+
+endmodule
+
+
 //------------------------------------------------------------------------------
 // End-of-File
-//------------------------------------------------------------------------------

+//------------------------------------------------------------------------------
diff --git a/rtl/multiword/mw_comparator.v b/rtl/multiword/mw_comparator.v
index b97a6cf..756ee83 100644
--- a/rtl/multiword/mw_comparator.v
+++ b/rtl/multiword/mw_comparator.v
@@ -1,220 +1,220 @@
-//------------------------------------------------------------------------------

-//

-// mw_comparator.v

-// -----------------------------------------------------------------------------

-// Multi-word comparator.

-//

-// Authors: Pavel Shatov

-//

-// Copyright (c) 2015-2016, NORDUnet A/S

-//

-// Redistribution and use in source and binary forms, with or without

-// modification, are permitted provided that the following conditions are met:

-//

-// - Redistributions of source code must retain the above copyright notice,

-//   this list of conditions and the following disclaimer.

-//

-// - Redistributions in binary form must reproduce the above copyright notice,

-//   this list of conditions and the following disclaimer in the documentation

-//   and/or other materials provided with the distribution.

-//

-// - Neither the name of the NORDUnet nor the names of its contributors may be

-//   used to endorse or promote products derived from this software without

-//   specific prior written permission.

-//

-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"

-// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

-// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

-// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE

-// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

-// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

-// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

-// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN

-// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

-// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

-// POSSIBILITY OF SUCH DAMAGE.

-//

-//------------------------------------------------------------------------------

-

-module mw_comparator

-	(

-		clk, rst_n,

-		ena, rdy,

-		xy_addr, x_din, y_din,

-		cmp_l, cmp_e, cmp_g

-	);

-	

-		

-		//

-		// Parameters

-		//

-	parameter	WORD_COUNTER_WIDTH	= 3;

-	parameter	OPERAND_NUM_WORDS		= 8;

-	

-	

-		//
-		// Handy Numbers
-		//
-	localparam	[WORD_COUNTER_WIDTH-1:0]	WORD_INDEX_ZERO	= 0;
-	localparam	[WORD_COUNTER_WIDTH-1:0]	WORD_INDEX_LAST	= OPERAND_NUM_WORDS - 1;

-	

-	

-		//
-		// Handy Functions
-		//
-	function	[WORD_COUNTER_WIDTH-1:0]	WORD_INDEX_PREV_OR_LAST;
-		input	[WORD_COUNTER_WIDTH-1:0]	WORD_INDEX_CURRENT;
-		begin
-			WORD_INDEX_PREV_OR_LAST = (WORD_INDEX_CURRENT > WORD_INDEX_ZERO) ?
-				WORD_INDEX_CURRENT - 1'b1 : WORD_INDEX_LAST;
-		end
-	endfunction

-	

-

-		//

-		// Ports

-		//

-	input		wire											clk;			// system clock

-	input		wire											rst_n;		// active-low async reset

-	

-	input		wire											ena;			// enable input

-	output	wire											rdy;			// ready output

-		

-	output	wire	[WORD_COUNTER_WIDTH-1:0]		xy_addr;		// address of current X and Y words

-	input		wire	[                32-1:0]		x_din;		// current X word

-	input		wire	[                32-1:0]		y_din;		// current Y word

-	

-	output	wire											cmp_l;		// X < Y ?

-	output	wire											cmp_e;		// X = Y ?

-	output	wire											cmp_g;		// X > Y ?

-	

-	

-		//
-		// Word Indices
-		//
-	reg	[WORD_COUNTER_WIDTH-1:0]	index_xy;

-	

-	reg										reg_cmp_l;

-	reg										reg_cmp_e;

-	reg										reg_cmp_g;

-	

-	

-		//
-		// Output Mapping

-		//
-	assign xy_addr	= index_xy;

-	
-	assign cmp_l = reg_cmp_l;
-	assign cmp_e = reg_cmp_e;

-	assign cmp_g = reg_cmp_g;

-

-

-		//
-		// FSM
-		//
-	localparam FSM_SHREG_WIDTH = 1 * OPERAND_NUM_WORDS + 3;
-	
-	reg	[FSM_SHREG_WIDTH-1:0]	fsm_shreg;
-	
-	assign rdy = fsm_shreg[0];
-	
-	wire [OPERAND_NUM_WORDS-1:0] fsm_shreg_dec_index_xy	= fsm_shreg[FSM_SHREG_WIDTH - (0 * OPERAND_NUM_WORDS + 1) : FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 0)];

-	wire [OPERAND_NUM_WORDS-1:0] fsm_shreg_calc_leg			= fsm_shreg[FSM_SHREG_WIDTH - (0 * OPERAND_NUM_WORDS + 3) : FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 2)];

-	wire                         fsm_shreg_calc_leg_last	= fsm_shreg[FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 2)];
-	
-	wire dec_index_xy		= |fsm_shreg_dec_index_xy;

-	wire calc_leg			= |fsm_shreg_calc_leg;

-	wire calc_leg_last	=  fsm_shreg_calc_leg_last;
-
-	
-	always @(posedge clk or negedge rst_n)
-		//
-		if (rst_n == 1'b0)
-			//
-			fsm_shreg <= {{FSM_SHREG_WIDTH-1{1'b0}}, 1'b1};
-			//
-		else begin
-			//
-			if (rdy)	fsm_shreg <= {ena, {FSM_SHREG_WIDTH-2{1'b0}}, ~ena};
-			//
-			else		fsm_shreg <= {1'b0, fsm_shreg[FSM_SHREG_WIDTH-1:1]};
-			//
-		end

-

-

-		//
-		// Word Index Increment Logic
-		//
-	always @(posedge clk)
-		//
-		if (rdy)						index_xy <= WORD_INDEX_LAST;
-		else if (dec_index_xy)	index_xy <= WORD_INDEX_PREV_OR_LAST(index_xy);

-		

-		

-		//

-		// 32-bit Subtractor

-		//	

-	wire	[31: 0]	sub32_d_out;

-	wire				sub32_b_in;

-	wire				sub32_b_out;

-	

-	subtractor32_wrapper subtractor32_inst

-	(

-		.clk		(clk),

-		

-		.a			(x_din),

-		.b			(y_din),

-		

-		.d			(sub32_d_out),

-		

-		.b_in		(sub32_b_in),

-		.b_out	(sub32_b_out)

-	);

-	

-	

-		//
-		// Borrow Masking Logic
-		//
-	reg	sub32_b_mask;
-	
-	always @(posedge clk)
-		//
-		sub32_b_mask <= (index_xy  == WORD_INDEX_LAST) ? 1'b1 : 1'b0;

-		
-	assign sub32_b_in = sub32_b_out & ~sub32_b_mask;

-		

-		//

-		// Output Logic

-		//

-	wire	cmp_unresolved = !(cmp_l || cmp_g);

-	

-	wire	cmp_borrow_is_set				= (sub32_b_out ==  1'b1) ? 1'b1 : 1'b0;

-	wire	cmp_difference_is_nonzero	= (sub32_d_out != 32'd0) ? 1'b1 : 1'b0;

-	

-	always @(posedge clk)

-		//

-		if (rdy) begin

-			//

-			if (ena) begin

-				//

-				reg_cmp_l	<= 1'b0;

-				reg_cmp_e	<= 1'b0;

-				reg_cmp_g	<= 1'b0;

-				//

-			end

-			//

-		end else if (cmp_unresolved && calc_leg) begin

-			//

-			if ( cmp_borrow_is_set)																	reg_cmp_l <= 1'b1;

-			if (!cmp_borrow_is_set &&  cmp_difference_is_nonzero)							reg_cmp_g <= 1'b1;

-			if (!cmp_borrow_is_set && !cmp_difference_is_nonzero && calc_leg_last)	reg_cmp_e <= 1'b1;

-			//

-		end

-		

-	

-endmodule

-

-

-//------------------------------------------------------------------------------

-// End-of-File

-//------------------------------------------------------------------------------

+//------------------------------------------------------------------------------
+//
+// mw_comparator.v
+// -----------------------------------------------------------------------------
+// Multi-word comparator.
+//
+// Authors: Pavel Shatov
+//
+// Copyright (c) 2015-2016, NORDUnet A/S
+//
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are met:
+//
+// - Redistributions of source code must retain the above copyright notice,
+//   this list of conditions and the following disclaimer.
+//
+// - Redistributions in binary form must reproduce the above copyright notice,
+//   this list of conditions and the following disclaimer in the documentation
+//   and/or other materials provided with the distribution.
+//
+// - Neither the name of the NORDUnet nor the names of its contributors may be
+//   used to endorse or promote products derived from this software without
+//   specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+// POSSIBILITY OF SUCH DAMAGE.
+//
+//------------------------------------------------------------------------------
+
+module mw_comparator
+  (
+   clk, rst_n,
+   ena, rdy,
+   xy_addr, x_din, y_din,
+   cmp_l, cmp_e, cmp_g
+   );
+
+
+   //
+   // Parameters
+   //
+   parameter	WORD_COUNTER_WIDTH	= 3;
+   parameter	OPERAND_NUM_WORDS		= 8;
+
+
+   //
+   // Handy Numbers
+   //
+   localparam	[WORD_COUNTER_WIDTH-1:0]	WORD_INDEX_ZERO	= 0;
+   localparam	[WORD_COUNTER_WIDTH-1:0]	WORD_INDEX_LAST	= OPERAND_NUM_WORDS - 1;
+
+
+   //
+   // Handy Functions
+   //
+   function	[WORD_COUNTER_WIDTH-1:0]	WORD_INDEX_PREV_OR_LAST;
+      input	[WORD_COUNTER_WIDTH-1:0]	WORD_INDEX_CURRENT;
+      begin
+	 WORD_INDEX_PREV_OR_LAST = (WORD_INDEX_CURRENT > WORD_INDEX_ZERO) ?
+				   WORD_INDEX_CURRENT - 1'b1 : WORD_INDEX_LAST;
+      end
+   endfunction
+
+
+   //
+   // Ports
+   //
+   input		wire											clk;			// system clock
+   input		wire											rst_n;		// active-low async reset
+
+   input		wire											ena;			// enable input
+   output	wire 												rdy;			// ready output
+
+   output	wire [WORD_COUNTER_WIDTH-1:0] 									xy_addr;		// address of current X and Y words
+   input		wire [                32-1:0] 								x_din;		// current X word
+   input		wire [                32-1:0] 								y_din;		// current Y word
+
+   output	wire 												cmp_l;		// X < Y ?
+   output	wire 												cmp_e;		// X = Y ?
+   output	wire 												cmp_g;		// X > Y ?
+
+
+   //
+   // Word Indices
+   //
+   reg [WORD_COUNTER_WIDTH-1:0] 										index_xy;
+
+   reg 														reg_cmp_l;
+   reg 														reg_cmp_e;
+   reg 														reg_cmp_g;
+
+
+   //
+   // Output Mapping
+   //
+   assign xy_addr	= index_xy;
+
+   assign cmp_l = reg_cmp_l;
+   assign cmp_e = reg_cmp_e;
+   assign cmp_g = reg_cmp_g;
+
+
+   //
+   // FSM
+   //
+   localparam FSM_SHREG_WIDTH = 1 * OPERAND_NUM_WORDS + 3;
+
+   reg [FSM_SHREG_WIDTH-1:0] 											fsm_shreg;
+
+   assign rdy = fsm_shreg[0];
+
+   wire [OPERAND_NUM_WORDS-1:0] 										fsm_shreg_dec_index_xy	= fsm_shreg[FSM_SHREG_WIDTH - (0 * OPERAND_NUM_WORDS + 1) : FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 0)];
+   wire [OPERAND_NUM_WORDS-1:0] 										fsm_shreg_calc_leg			= fsm_shreg[FSM_SHREG_WIDTH - (0 * OPERAND_NUM_WORDS + 3) : FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 2)];
+   wire 													fsm_shreg_calc_leg_last	= fsm_shreg[FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 2)];
+
+   wire 													dec_index_xy		= |fsm_shreg_dec_index_xy;
+   wire 													calc_leg			= |fsm_shreg_calc_leg;
+   wire 													calc_leg_last	=  fsm_shreg_calc_leg_last;
+
+
+   always @(posedge clk or negedge rst_n)
+     //
+     if (rst_n == 1'b0)
+       //
+       fsm_shreg <= {{FSM_SHREG_WIDTH-1{1'b0}}, 1'b1};
+   //
+     else begin
+	//
+	if (rdy)	fsm_shreg <= {ena, {FSM_SHREG_WIDTH-2{1'b0}}, ~ena};
+	//
+	else		fsm_shreg <= {1'b0, fsm_shreg[FSM_SHREG_WIDTH-1:1]};
+	//
+     end
+
+
+   //
+   // Word Index Increment Logic
+   //
+   always @(posedge clk)
+     //
+     if (rdy)						index_xy <= WORD_INDEX_LAST;
+     else if (dec_index_xy)	index_xy <= WORD_INDEX_PREV_OR_LAST(index_xy);
+
+
+   //
+   // 32-bit Subtractor
+   //
+   wire	[31: 0]	sub32_d_out;
+   wire 	sub32_b_in;
+   wire 	sub32_b_out;
+
+   subtractor32_wrapper subtractor32_inst
+     (
+      .clk		(clk),
+
+      .a			(x_din),
+      .b			(y_din),
+
+      .d			(sub32_d_out),
+
+      .b_in		(sub32_b_in),
+      .b_out	(sub32_b_out)
+      );
+
+
+   //
+   // Borrow Masking Logic
+   //
+   reg 		sub32_b_mask;
+
+   always @(posedge clk)
+     //
+     sub32_b_mask <= (index_xy  == WORD_INDEX_LAST) ? 1'b1 : 1'b0;
+
+   assign sub32_b_in = sub32_b_out & ~sub32_b_mask;
+
+   //
+   // Output Logic
+   //
+   wire 	cmp_unresolved = !(cmp_l || cmp_g);
+
+   wire 	cmp_borrow_is_set				= (sub32_b_out ==  1'b1) ? 1'b1 : 1'b0;
+   wire 	cmp_difference_is_nonzero	= (sub32_d_out != 32'd0) ? 1'b1 : 1'b0;
+
+   always @(posedge clk)
+     //
+     if (rdy) begin
+	//
+	if (ena) begin
+	   //
+	   reg_cmp_l	<= 1'b0;
+	   reg_cmp_e	<= 1'b0;
+	   reg_cmp_g	<= 1'b0;
+	   //
+	end
+	//
+     end else if (cmp_unresolved && calc_leg) begin
+	//
+	if ( cmp_borrow_is_set)																	reg_cmp_l <= 1'b1;
+	if (!cmp_borrow_is_set &&  cmp_difference_is_nonzero)							reg_cmp_g <= 1'b1;
+	if (!cmp_borrow_is_set && !cmp_difference_is_nonzero && calc_leg_last)	reg_cmp_e <= 1'b1;
+	//
+     end
+
+
+endmodule
+
+
+//------------------------------------------------------------------------------
+// End-of-File
+//------------------------------------------------------------------------------
diff --git a/rtl/multiword/mw_mover.v b/rtl/multiword/mw_mover.v
index 5db95a7..d6e025f 100644
--- a/rtl/multiword/mw_mover.v
+++ b/rtl/multiword/mw_mover.v
@@ -1,175 +1,175 @@
-//------------------------------------------------------------------------------

-//

-// mw_mover.v

-// -----------------------------------------------------------------------------

-// Multi-word data mover.

-//

-// Authors: Pavel Shatov

-//

-// Copyright (c) 2015-2016, NORDUnet A/S

-//

-// Redistribution and use in source and binary forms, with or without

-// modification, are permitted provided that the following conditions are met:

-//

-// - Redistributions of source code must retain the above copyright notice,

-//   this list of conditions and the following disclaimer.

-//

-// - Redistributions in binary form must reproduce the above copyright notice,

-//   this list of conditions and the following disclaimer in the documentation

-//   and/or other materials provided with the distribution.

-//

-// - Neither the name of the NORDUnet nor the names of its contributors may be

-//   used to endorse or promote products derived from this software without

-//   specific prior written permission.

-//

-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"

-// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

-// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

-// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE

-// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

-// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

-// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

-// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN

-// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

-// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

-// POSSIBILITY OF SUCH DAMAGE.

-//

-//------------------------------------------------------------------------------

-

-module mw_mover

-	(

-		clk, rst_n,

-		ena, rdy,

-		x_addr, y_addr, y_wren,

-		x_din, y_dout

-	);

-

-

-		//

-		// Parameters

-		//

-	parameter	WORD_COUNTER_WIDTH	= 3;

-	parameter	OPERAND_NUM_WORDS		= 8;

-	

-	

-		//
-		// Handy Numbers
-		//
-	localparam	[WORD_COUNTER_WIDTH-1:0]	WORD_INDEX_ZERO	= 0;
-	localparam	[WORD_COUNTER_WIDTH-1:0]	WORD_INDEX_LAST	= OPERAND_NUM_WORDS - 1;

-	

-	

-		//
-		// Handy Functions
-		//
-	function	[WORD_COUNTER_WIDTH-1:0]	WORD_INDEX_NEXT_OR_ZERO;
-		input	[WORD_COUNTER_WIDTH-1:0]	WORD_INDEX_CURRENT;
-		begin
-			WORD_INDEX_NEXT_OR_ZERO = (WORD_INDEX_CURRENT < WORD_INDEX_LAST) ?
-				WORD_INDEX_CURRENT + 1'b1 : WORD_INDEX_ZERO;
-		end
-	endfunction

-	

-

-		//

-		// Ports

-		//

-	input		wire											clk;			// system clock

-	input		wire											rst_n;		// active-low async reset

-	

-	input		wire											ena;			// enable input

-	output	wire											rdy;			// ready output

-		

-	output	wire	[WORD_COUNTER_WIDTH-1:0]		x_addr;		// address of current X word

-	output	wire	[WORD_COUNTER_WIDTH-1:0]		y_addr;		// address of current Y word

-	output	wire											y_wren;		// store current Y word

-	

-	input		wire	[                32-1:0]		x_din;		// current X word

-	output	wire	[                32-1:0]		y_dout;		// current Y word

-	

-	

-		//
-		// Word Indices
-		//
-	reg	[WORD_COUNTER_WIDTH-1:0]	index_x;

-	reg	[WORD_COUNTER_WIDTH-1:0]	index_y;

-	

-	

-		//
-		// Output Mapping

-		//
-	assign x_addr	= index_x;

-	assign y_addr	= index_y;

-

-

-		//
-		// FSM
-		//
-	localparam FSM_SHREG_WIDTH = 1 * OPERAND_NUM_WORDS + 2;
-	
-	reg	[FSM_SHREG_WIDTH-1:0]	fsm_shreg;
-	
-	assign rdy = fsm_shreg[0];
-	
-	wire [OPERAND_NUM_WORDS-1:0] fsm_shreg_inc_index_x	= fsm_shreg[FSM_SHREG_WIDTH - (0 * OPERAND_NUM_WORDS + 1) : FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 0)];
-	wire [OPERAND_NUM_WORDS-1:0] fsm_shreg_inc_index_y	= fsm_shreg[FSM_SHREG_WIDTH - (0 * OPERAND_NUM_WORDS + 2) : FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 1)];

-	
-	wire inc_index_x	= |fsm_shreg_inc_index_x;

-	wire inc_index_y	= |fsm_shreg_inc_index_y;

-	wire store_word_y	= |fsm_shreg_inc_index_x;
-
-	
-	always @(posedge clk or negedge rst_n)
-		//
-		if (rst_n == 1'b0)
-			//
-			fsm_shreg <= {{FSM_SHREG_WIDTH-1{1'b0}}, 1'b1};
-			//
-		else begin
-			//
-			if (rdy)	fsm_shreg <= {ena, {FSM_SHREG_WIDTH-2{1'b0}}, ~ena};
-			//
-			else		fsm_shreg <= {1'b0, fsm_shreg[FSM_SHREG_WIDTH-1:1]};
-			//
-		end

-

-

-		//
-		// Word Index Increment Logic
-		//
-	always @(posedge clk)
-		//
-		if (rdy) begin

-			index_x <= WORD_INDEX_ZERO;

-			index_y <= WORD_INDEX_ZERO;

-		end else begin

-			if (inc_index_x)	index_x <= WORD_INDEX_NEXT_OR_ZERO(index_x);

-			if (inc_index_y)	index_y <= WORD_INDEX_NEXT_OR_ZERO(index_y);

-		end

-		

-		

-		//

-		// Write Enable Logic

-		//

-	reg	y_wren_reg;

-	

-	assign y_wren = y_wren_reg;

-	

-	always @(posedge clk)
-		//
-		if (rdy)		y_wren_reg	<= 1'b0;
-		else			y_wren_reg	<= store_word_y;

-		

-		

-		//

-		// Output Logic

-		//

-	assign y_dout = x_din;

-		

-	

-endmodule

-

-

-//------------------------------------------------------------------------------

-// End-of-File

-//------------------------------------------------------------------------------

+//------------------------------------------------------------------------------
+//
+// mw_mover.v
+// -----------------------------------------------------------------------------
+// Multi-word data mover.
+//
+// Authors: Pavel Shatov
+//
+// Copyright (c) 2015-2016, NORDUnet A/S
+//
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are met:
+//
+// - Redistributions of source code must retain the above copyright notice,
+//   this list of conditions and the following disclaimer.
+//
+// - Redistributions in binary form must reproduce the above copyright notice,
+//   this list of conditions and the following disclaimer in the documentation
+//   and/or other materials provided with the distribution.
+//
+// - Neither the name of the NORDUnet nor the names of its contributors may be
+//   used to endorse or promote products derived from this software without
+//   specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+// POSSIBILITY OF SUCH DAMAGE.
+//
+//------------------------------------------------------------------------------
+
+module mw_mover
+  (
+   clk, rst_n,
+   ena, rdy,
+   x_addr, y_addr, y_wren,
+   x_din, y_dout
+   );
+
+
+   //
+   // Parameters
+   //
+   parameter	WORD_COUNTER_WIDTH	= 3;
+   parameter	OPERAND_NUM_WORDS		= 8;
+
+
+   //
+   // Handy Numbers
+   //
+   localparam	[WORD_COUNTER_WIDTH-1:0]	WORD_INDEX_ZERO	= 0;
+   localparam	[WORD_COUNTER_WIDTH-1:0]	WORD_INDEX_LAST	= OPERAND_NUM_WORDS - 1;
+
+
+   //
+   // Handy Functions
+   //
+   function	[WORD_COUNTER_WIDTH-1:0]	WORD_INDEX_NEXT_OR_ZERO;
+      input	[WORD_COUNTER_WIDTH-1:0]	WORD_INDEX_CURRENT;
+      begin
+	 WORD_INDEX_NEXT_OR_ZERO = (WORD_INDEX_CURRENT < WORD_INDEX_LAST) ?
+				   WORD_INDEX_CURRENT + 1'b1 : WORD_INDEX_ZERO;
+      end
+   endfunction
+
+
+   //
+   // Ports
+   //
+   input		wire											clk;			// system clock
+   input		wire											rst_n;		// active-low async reset
+
+   input		wire											ena;			// enable input
+   output	wire 												rdy;			// ready output
+
+   output	wire [WORD_COUNTER_WIDTH-1:0] 									x_addr;		// address of current X word
+   output	wire [WORD_COUNTER_WIDTH-1:0] 									y_addr;		// address of current Y word
+   output	wire 												y_wren;		// store current Y word
+
+   input		wire [                32-1:0] 								x_din;		// current X word
+   output	wire [                32-1:0] 									y_dout;		// current Y word
+
+
+   //
+   // Word Indices
+   //
+   reg [WORD_COUNTER_WIDTH-1:0] 										index_x;
+   reg [WORD_COUNTER_WIDTH-1:0] 										index_y;
+
+
+   //
+   // Output Mapping
+   //
+   assign x_addr	= index_x;
+   assign y_addr	= index_y;
+
+
+   //
+   // FSM
+   //
+   localparam FSM_SHREG_WIDTH = 1 * OPERAND_NUM_WORDS + 2;
+
+   reg [FSM_SHREG_WIDTH-1:0] 											fsm_shreg;
+
+   assign rdy = fsm_shreg[0];
+
+   wire [OPERAND_NUM_WORDS-1:0] 										fsm_shreg_inc_index_x	= fsm_shreg[FSM_SHREG_WIDTH - (0 * OPERAND_NUM_WORDS + 1) : FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 0)];
+   wire [OPERAND_NUM_WORDS-1:0] 										fsm_shreg_inc_index_y	= fsm_shreg[FSM_SHREG_WIDTH - (0 * OPERAND_NUM_WORDS + 2) : FSM_SHREG_WIDTH - (1 * OPERAND_NUM_WORDS + 1)];
+
+   wire 													inc_index_x	= |fsm_shreg_inc_index_x;
+   wire 													inc_index_y	= |fsm_shreg_inc_index_y;
+   wire 													store_word_y	= |fsm_shreg_inc_index_x;
+
+
+   always @(posedge clk or negedge rst_n)
+     //
+     if (rst_n == 1'b0)
+       //
+       fsm_shreg <= {{FSM_SHREG_WIDTH-1{1'b0}}, 1'b1};
+   //
+     else begin
+	//
+	if (rdy)	fsm_shreg <= {ena, {FSM_SHREG_WIDTH-2{1'b0}}, ~ena};
+	//
+	else		fsm_shreg <= {1'b0, fsm_shreg[FSM_SHREG_WIDTH-1:1]};
+	//
+     end
+
+
+   //
+   // Word Index Increment Logic
+   //
+   always @(posedge clk)
+     //
+     if (rdy) begin
+	index_x <= WORD_INDEX_ZERO;
+	index_y <= WORD_INDEX_ZERO;
+     end else begin
+	if (inc_index_x)	index_x <= WORD_INDEX_NEXT_OR_ZERO(index_x);
+	if (inc_index_y)	index_y <= WORD_INDEX_NEXT_OR_ZERO(index_y);
+     end
+
+
+   //
+   // Write Enable Logic
+   //
+   reg	y_wren_reg;
+
+   assign y_wren = y_wren_reg;
+
+   always @(posedge clk)
+     //
+     if (rdy)		y_wren_reg	<= 1'b0;
+     else			y_wren_reg	<= store_word_y;
+
+
+   //
+   // Output Logic
+   //
+   assign y_dout = x_din;
+
+
+endmodule
+
+
+//------------------------------------------------------------------------------
+// End-of-File
+//------------------------------------------------------------------------------
diff --git a/rtl/util/bram_1rw_1ro_readfirst.v b/rtl/util/bram_1rw_1ro_readfirst.v
index 28782c2..db62726 100644
--- a/rtl/util/bram_1rw_1ro_readfirst.v
+++ b/rtl/util/bram_1rw_1ro_readfirst.v
@@ -36,11 +36,11 @@ module bram_1rw_1ro_readfirst
   #(parameter MEM_WIDTH            = 32,
     parameter MEM_ADDR_BITS        = 8)
    (
-    input wire                     clk,
+    input wire 			   clk,
 
     input wire [MEM_ADDR_BITS-1:0] a_addr,
-    input wire                     a_wr,
-    input wire [MEM_WIDTH-1:0]     a_in,
+    input wire 			   a_wr,
+    input wire [MEM_WIDTH-1:0] 	   a_in,
     output wire [MEM_WIDTH-1:0]    a_out,
 
     input wire [MEM_ADDR_BITS-1:0] b_addr,
@@ -52,27 +52,27 @@ module bram_1rw_1ro_readfirst
    // BRAM
    //
    (* RAM_STYLE="BLOCK" *)
-   reg [MEM_WIDTH-1:0]             bram[0:(2**MEM_ADDR_BITS)-1];

-	

-	

-	//

-	// Initialization

-	//

-	/**

-	integer c;

-	initial begin

-		for (c=0; c<(2**MEM_ADDR_BITS); c=c+1)

-			bram[c] = {MEM_WIDTH{1'b0}};

-	end

-	**/

-	
+   reg [MEM_WIDTH-1:0] 		   bram[0:(2**MEM_ADDR_BITS)-1];
+
+
+   //
+   // Initialization
+   //
+   /**
+    integer c;
+    initial begin
+    for (c=0; c<(2**MEM_ADDR_BITS); c=c+1)
+    bram[c] = {MEM_WIDTH{1'b0}};
+	end
+    **/
+
 
 
    //
    // Output Registers
    //
-   reg [MEM_WIDTH-1:0]             bram_reg_a;
-   reg [MEM_WIDTH-1:0]             bram_reg_b;
+   reg [MEM_WIDTH-1:0] 		   bram_reg_a;
+   reg [MEM_WIDTH-1:0] 		   bram_reg_b;
 
    assign a_out = bram_reg_a;
    assign b_out = bram_reg_b;