//======================================================================
//
// sha512_core.v
// -------------
// Verilog 2001 implementation of the SHA-512 hash function.
// This is the internal core with wide interfaces.
//
//
// Author: Joachim Strombergson
// Copyright (c) 2014, NORDUnet A/S
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
// - Redistributions of source code must retain the above copyright notice,
// this list of conditions and the following disclaimer.
//
// - Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
//
// - Neither the name of the NORDUnet nor the names of its contributors may
// be used to endorse or promote products derived from this software
// without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
//======================================================================
module sha512_core(
input wire clk,
input wire reset_n,
input wire init,
input wire next,
input wire [1 : 0] mode,
input wire work_factor,
input wire [31 : 0] work_factor_num,
input wire [1023 : 0] block,
output wire ready,
input wire [31 : 0] state_wr_data,
input wire state00_we,
input wire state01_we,
input wire state02_we,
input wire state03_we,
input wire state04_we,
input wire state05_we,
input wire state06_we,
input wire state07_we,
input wire state08_we,
input wire state09_we,
input wire state10_we,
input wire state11_we,
input wire state12_we,
input wire state13_we,
input wire state14_we,
input wire state15_we,
output wire [511 : 0] digest,
output wire digest_valid
);
//----------------------------------------------------------------
// Internal constant and parameter definitions.
//----------------------------------------------------------------
parameter SHA512_ROUNDS = 79;
parameter CTRL_IDLE = 0;
parameter CTRL_ROUNDS1 = 1;
parameter CTRL_ROUNDS2 = 2;
parameter CTRL_DONE = 3;
//----------------------------------------------------------------
// Registers including update variables and write enable.
//----------------------------------------------------------------
reg [63 : 0] a_reg;
reg [63 : 0] a_new;
reg [63 : 0] b_reg;
reg [63 : 0] b_new;
reg [63 : 0] c_reg;
reg [63 : 0] c_new;
reg [63 : 0] d_reg;
reg [63 : 0] d_new;
reg [63 : 0] e_reg;
reg [63 : 0] e_new;
reg [63 : 0] f_reg;
reg [63 : 0] f_new;
reg [63 : 0] g_reg;
reg [63 : 0] g_new;
reg [63 : 0] h_reg;
reg [63 : 0] h_new;
reg a_h_we;
reg [63 : 0] t1_reg;
reg [63 : 0] t1_new;
reg t1_we;
reg [63 : 0] t2_reg;
reg [63 : 0] t2_new;
reg t2_we;
reg [63 : 0] H0_reg;
reg [63 : 0] H0_new;
reg [63 : 0] H1_reg;
reg [63 : 0] H1_new;
reg [63 : 0] H2_reg;
reg [63 : 0] H2_new;
reg [63 : 0] H3_reg;
reg [63 : 0] H3_new;
reg [63 : 0] H4_reg;
reg [63 : 0] H4_new;
reg [63 : 0] H5_reg;
reg [63 : 0] H5_new;
reg [63 : 0] H6_reg;
reg [63 : 0] H6_new;
reg [63 : 0] H7_reg;
reg [63 : 0] H7_new;
reg H_we;
reg [6 : 0] round_ctr_reg;
reg [6 : 0] round_ctr_new;
reg round_ctr_we;
reg round_ctr_inc;
reg round_ctr_rst;
reg [31 : 0] work_factor_ctr_reg;
reg [31 : 0] work_factor_ctr_new;
reg work_factor_ctr_rst;
reg work_factor_ctr_inc;
reg work_factor_ctr_done;
reg work_factor_ctr_we;
reg digest_valid_reg;
reg digest_valid_new;
reg digest_valid_we;
reg [1 : 0] sha512_ctrl_reg;
reg [1 : 0] sha512_ctrl_new;
reg sha512_ctrl_we;
//----------------------------------------------------------------
// Wires.
//----------------------------------------------------------------
reg digest_init;
reg digest_update;
reg state_init;
reg state_update;
reg first_block;
reg ready_flag;
wire [63 : 0] k_data;
reg w_init;
reg w_next;
wire [63 : 0] w_data;
wire [63 : 0] H0_0;
wire [63 : 0] H0_1;
wire [63 : 0] H0_2;
wire [63 : 0] H0_3;
wire [63 : 0] H0_4;
wire [63 : 0] H0_5;
wire [63 : 0] H0_6;
wire [63 : 0] H0_7;
//----------------------------------------------------------------
// Module instantiantions.
//----------------------------------------------------------------
sha512_k_constants k_constants_inst(
.addr(round_ctr_reg),
.K(k_data)
);
sha512_h_constants h_constants_inst(
.mode(mode),
.H0(H0_0),
.H1(H0_1),
.H2(H0_2),
.H3(H0_3),
.H4(H0_4),
.H5(H0_5),
.H6(H0_6),
.H7(H0_7)
);
sha512_w_mem w_mem_inst(
.clk(clk),
.reset_n(reset_n),
.block(block),
.init(w_init),
.next(w_next),
.w(w_data)
);
//----------------------------------------------------------------
// Concurrent connectivity for ports etc.
//----------------------------------------------------------------
assign ready = ready_flag;
assign digest = {H0_reg, H1_reg, H2_reg, H3_reg,
H4_reg, H5_reg, H6_reg, H7_reg};
assign digest_valid = digest_valid_reg;
//----------------------------------------------------------------
// reg_update
// Update functionality for all registers in the core.
// All registers are positive edge triggered with asynchronous
// active low reset. All registers have write enable.
//----------------------------------------------------------------
always @ (posedge clk or negedge reset_n)
begin : reg_update
if (!reset_n)
begin
a_reg <= 64'h0;
b_reg <= 64'h0;
c_reg <= 64'h0;
d_reg <= 64'h0;
e_reg <= 64'h0;
f_reg <= 64'h0;
g_reg <= 64'h0;
h_reg <= 64'h0;
t1_reg <= 64'h0;
t2_reg <= 64'h0;
H0_reg <= 64'h0;
H1_reg <= 64'h0;
H2_reg <= 64'h0;
H3_reg <= 64'h0;
H4_reg <= 64'h0;
H5_reg <= 64'h0;
H6_reg <= 64'h0;
H7_reg <= 64'h0;
work_factor_ctr_reg <= 32'h0;
digest_valid_reg <= 1'h0;
round_ctr_reg <= 7'h0;
sha512_ctrl_reg <= CTRL_IDLE;
end
else
begin
if (t1_we)
t1_reg <= t1_new;
if (t2_we)
t2_reg <= t2_new;
if (a_h_we)
begin
a_reg <= a_new;
b_reg <= b_new;
c_reg <= c_new;
d_reg <= d_new;
e_reg <= e_new;
f_reg <= f_new;
g_reg <= g_new;
h_reg <= h_new;
end
if (H_we)
begin
H0_reg <= H0_new;
H1_reg <= H1_new;
H2_reg <= H2_new;
H3_reg <= H3_new;
H4_reg <= H4_new;
H5_reg <= H5_new;
H6_reg <= H6_new;
H7_reg <= H7_new;
end
if (state00_we)
H0_reg <= {state_wr_data, H0_reg[31 : 0]};
if (state01_we)
H0_reg <= {H0_reg[63 : 32], state_wr_data};
if (state02_we)
H1_reg <= {state_wr_data, H1_reg[31 : 0]};
if (state03_we)
H1_reg <= {H1_reg[63 : 32], state_wr_data};
if (state04_we)
H2_reg <= {state_wr_data, H2_reg[31 : 0]};
if (state05_we)
H2_reg <= {H2_reg[63 : 32], state_wr_data};
if (state06_we)
H3_reg <= {state_wr_data, H3_reg[31 : 0]};
if (state07_we)
H3_reg <= {H3_reg[63 : 32], state_wr_data};
if (state08_we)
H4_reg <= {state_wr_data, H4_reg[31 : 0]};
if (state09_we)
H4_reg <= {H4_reg[63 : 32], state_wr_data};
if (state10_we)
H5_reg <= {state_wr_data, H5_reg[31 : 0]};
if (state11_we)
H5_reg <= {H5_reg[63 : 32], state_wr_data};
if (state12_we)
H6_reg <= {state_wr_data, H6_reg[31 : 0]};
if (state13_we)
H6_reg <= {H6_reg[63 : 32], state_wr_data};
if (state14_we)
H7_reg <= {state_wr_data, H7_reg[31 : 0]};
if (state15_we)
H7_reg <= {H7_reg[63 : 32], state_wr_data};
if (round_ctr_we)
begin
round_ctr_reg <= round_ctr_new;
end
if (work_factor_ctr_we)
begin
work_factor_ctr_reg <= work_factor_ctr_new;
end
if (digest_valid_we)
begin
digest_valid_reg <= digest_valid_new;
end
if (sha512_ctrl_we)
begin
sha512_ctrl_reg <= sha512_ctrl_new;
end
end
end // reg_update
//----------------------------------------------------------------
// digest_logic
//
// The logic needed to init as well as update the digest.
//----------------------------------------------------------------
always @*
begin : digest_logic
H0_new = 64'h00000000;
H1_new = 64'h00000000;
H2_new = 64'h00000000;
H3_new = 64'h00000000;
H4_new = 64'h00000000;
H5_new = 64'h00000000;
H6_new = 64'h00000000;
H7_new = 64'h00000000;
H_we = 0;
if (digest_init)
begin
H0_new = H0_0;
H1_new = H0_1;
H2_new = H0_2;
H3_new = H0_3;
H4_new = H0_4;
H5_new = H0_5;
H6_new = H0_6;
H7_new = H0_7;
H_we = 1;
end
if (digest_update)
begin
H0_new = H0_reg + a_reg;
H1_new = H1_reg + b_reg;
H2_new = H2_reg + c_reg;
H3_new = H3_reg + d_reg;
H4_new = H4_reg + e_reg;
H5_new = H5_reg + f_reg;
H6_new = H6_reg + g_reg;
H7_new = H7_reg + h_reg;
H_we = 1;
end
end // digest_logic
//----------------------------------------------------------------
// t1_logic
//
// The logic for the T1 function.
//----------------------------------------------------------------
always @*
begin : t1_logic
reg [63 : 0] sum1;
reg [63 : 0] ch;
sum1 = {e_reg[13 : 0], e_reg[63 : 14]} ^
{e_reg[17 : 0], e_reg[63 : 18]} ^
{e_reg[40 : 0], e_reg[63 : 41]};
ch = (e_reg & f_reg) ^ ((~e_reg) & g_reg);
t1_new = h_reg + sum1 + ch + k_data + w_data;
end // t1_logic
//----------------------------------------------------------------
// t2_logic
//
// The logic for the T2 function
//----------------------------------------------------------------
always @*
begin : t2_logic
reg [63 : 0] sum0;
reg [63 : 0] maj;
sum0 = {a_reg[27 : 0], a_reg[63 : 28]} ^
{a_reg[33 : 0], a_reg[63 : 34]} ^
{a_reg[38 : 0], a_reg[63 : 39]};
maj = (a_reg & b_reg) ^ (a_reg & c_reg) ^ (b_reg & c_reg);
t2_new = sum0 + maj;
end // t2_logic
//----------------------------------------------------------------
// state_logic
//
// The logic needed to init as well as update the state during
// round processing.
//----------------------------------------------------------------
always @*
begin : state_logic
a_new = 64'h00000000;
b_new = 64'h00000000;
c_new = 64'h00000000;
d_new = 64'h00000000;
e_new = 64'h00000000;
f_new = 64'h00000000;
g_new = 64'h00000000;
h_new = 64'h00000000;
a_h_we = 0;
if (state_init)
begin
if (first_block)
begin
a_new = H0_0;
b_new = H0_1;
c_new = H0_2;
d_new = H0_3;
e_new = H0_4;
f_new = H0_5;
g_new = H0_6;
h_new = H0_7;
a_h_we = 1;
end
else
begin
a_new = H0_reg;
b_new = H1_reg;
c_new = H2_reg;
d_new = H3_reg;
e_new = H4_reg;
f_new = H5_reg;
g_new = H6_reg;
h_new = H7_reg;
a_h_we = 1;
end
end
if (state_update)
begin
a_new = t1_new + t2_new;
b_new = a_reg;
c_new = b_reg;
d_new = c_reg;
e_new = d_reg + t1_new;
f_new = e_reg;
g_new = f_reg;
h_new = g_reg;
a_h_we = 1;
end
end // state_logic
//----------------------------------------------------------------
// round_ctr
//
// Update logic for the round counter, a monotonically
// increasing counter with reset.
//----------------------------------------------------------------
always @*
begin : round_ctr
round_ctr_new = 7'h0;
round_ctr_we = 0;
if (round_ctr_rst)
begin
round_ctr_new = 7'h00;
round_ctr_we = 1;
end
if (round_ctr_inc)
begin
round_ctr_new = round_ctr_reg + 1'b1;
round_ctr_we = 1;
end
end // round_ctr
//----------------------------------------------------------------
// work_factor_ctr
//
// Work factor counter logic.
//----------------------------------------------------------------
always @*
begin : work_factor_ctr
work_factor_ctr_new = 32'h0;
work_factor_ctr_we = 0;
if (work_factor_ctr_reg < work_factor_num)
work_factor_ctr_done = 0;
else
work_factor_ctr_done = 1;
if (work_factor_ctr_rst)
begin
work_factor_ctr_new = 32'h0;
work_factor_ctr_we = 1;
end
if (work_factor_ctr_inc)
begin
work_factor_ctr_new = work_factor_ctr_reg + 1'b1;
work_factor_ctr_we = 1;
end
end // work_factor_ctr
//----------------------------------------------------------------
// sha512_ctrl_fsm
//
// Logic for the state machine controlling the core behaviour.
//----------------------------------------------------------------
always @*
begin : sha512_ctrl_fsm
digest_init = 0;
digest_update = 0;
state_init = 0;
state_update = 0;
t1_we = 1;
t2_we = 1;
first_block = 0;
ready_flag = 0;
w_init = 0;
w_next = 0;
round_ctr_inc = 0;
round_ctr_rst = 0;
digest_valid_new = 0;
digest_valid_we = 0;
work_factor_ctr_rst = 0;
work_factor_ctr_inc = 0;
sha512_ctrl_new = CTRL_IDLE;
sha512_ctrl_we = 0;
case (sha512_ctrl_reg)
CTRL_IDLE:
begin
ready_flag = 1;
if (init)
begin
work_factor_ctr_rst = 1;
digest_init = 1;
w_init = 1;
state_init = 1;
first_block = 1;
round_ctr_rst = 1;
digest_valid_new = 0;
digest_valid_we = 1;
sha512_ctrl_new = CTRL_ROUNDS1;
sha512_ctrl_we = 1;
end
if (next)
begin
work_factor_ctr_rst = 1;
w_init = 1;
state_init = 1;
round_ctr_rst = 1;
digest_valid_new = 0;
digest_valid_we = 1;
sha512_ctrl_new = CTRL_ROUNDS1;
sha512_ctrl_we = 1;
end
end
CTRL_ROUNDS1:
begin
sha512_ctrl_new = CTRL_ROUNDS2;
sha512_ctrl_we = 1;
end
CTRL_ROUNDS2:
begin
w_next = 1;
state_update = 1;
round_ctr_inc = 1;
if (round_ctr_reg == SHA512_ROUNDS)
begin
work_factor_ctr_inc = 1;
sha512_ctrl_new = CTRL_DONE;
sha512_ctrl_we = 1;
end
end
CTRL_DONE:
begin
if (work_factor)
begin
if (!work_factor_ctr_done)
begin
w_init = 1;
state_init = 1;
round_ctr_rst = 1;
sha512_ctrl_new = CTRL_ROUNDS1;
sha512_ctrl_we = 1;
end
else
begin
digest_update = 1;
digest_valid_new = 1;
digest_valid_we = 1;
sha512_ctrl_new = CTRL_IDLE;
sha512_ctrl_we = 1;
end
end
else
begin
digest_update = 1;
digest_valid_new = 1;
digest_valid_we = 1;
sha512_ctrl_new = CTRL_IDLE;
sha512_ctrl_we = 1;
end
end
endcase // case (sha512_ctrl_reg)
end // sha512_ctrl_fsm
endmodule // sha512_core
//======================================================================
// EOF sha512_core.v
//======================================================================