diff options
Diffstat (limited to 'src/tb')
| -rw-r--r-- | src/tb/tb_sha1.v | 139 |
1 files changed, 115 insertions, 24 deletions
diff --git a/src/tb/tb_sha1.v b/src/tb/tb_sha1.v index 632b4e9..6e39075 100644 --- a/src/tb/tb_sha1.v +++ b/src/tb/tb_sha1.v @@ -5,8 +5,8 @@ // Testbench for the SHA-1 top level wrapper. // // -// Author: Joachim Strombergson -// Copyright (c) 2014 SUNET +// Copyright (c) 2014, SUNET +// All rights reserved. // // Redistribution and use in source and binary forms, with or // without modification, are permitted provided that the following @@ -45,7 +45,8 @@ module tb_sha1(); //---------------------------------------------------------------- // Internal constant and parameter definitions. //---------------------------------------------------------------- - parameter DEBUG = 0; + parameter DEBUG_CORE = 0; + parameter DEBUG_TOP = 0; parameter CLK_HALF_PERIOD = 2; @@ -110,16 +111,17 @@ module tb_sha1(); // Device Under Test. //---------------------------------------------------------------- sha1 dut( - .clk(tb_clk), - .reset_n(tb_reset_n), + .clk(tb_clk), + .reset_n(tb_reset_n), - .cs(tb_cs), - .write_read(tb_write_read), + .cs(tb_cs), + .we(tb_write_read), - .address(tb_address), - .data_in(tb_data_in), - .data_out(tb_data_out) - ); + .address(tb_address), + .write_data(tb_data_in), + .read_data(tb_data_out), + .error(tb_error) + ); //---------------------------------------------------------------- @@ -138,20 +140,108 @@ module tb_sha1(); //---------------------------------------------------------------- always begin : sys_monitor + if (DEBUG_CORE) + begin + dump_core_state(); + end + + if (DEBUG_TOP) + begin + dump_top_state(); + end + #(2 * CLK_HALF_PERIOD); cycle_ctr = cycle_ctr + 1; end //---------------------------------------------------------------- - // dump_dut_state() + // dump_top_state() + // + // Dump state of the the top of the dut. + //---------------------------------------------------------------- + task dump_top_state(); + begin + $display("State of top"); + $display("-------------"); + $display("Inputs and outputs:"); + $display("cs = 0x%01x, we = 0x%01x", dut.cs, dut.we); + $display("address = 0x%02x, write_data = 0x%08x", dut.address, dut.write_data); + $display("error = 0x%01x, read_data = 0x%08x", dut.error, dut.read_data); + $display(""); + + $display("Control and status flags:"); + $display("init = 0x%01x, next = 0x%01x, ready = 0x%01x", + dut.init_reg, dut.next_reg, dut.ready_reg); + $display(""); + + $display("block registers:"); + $display("block0_reg = 0x%08x, block1_reg = 0x%08x, block2_reg = 0x%08x, block3_reg = 0x%08x", + dut.block0_reg, dut.block1_reg, dut.block2_reg, dut.block3_reg); + + $display("block4_reg = 0x%08x, block5_reg = 0x%08x, block6_reg = 0x%08x, block7_reg = 0x%08x", + dut.block4_reg, dut.block5_reg, dut.block6_reg, dut.block7_reg); + + $display("block8_reg = 0x%08x, block9_reg = 0x%08x, block10_reg = 0x%08x, block11_reg = 0x%08x", + dut.block8_reg, dut.block9_reg, dut.block10_reg, dut.block11_reg); + + $display("block12_reg = 0x%08x, block13_reg = 0x%08x, block14_reg = 0x%08x, block15_reg = 0x%08x", + dut.block12_reg, dut.block13_reg, dut.block14_reg, dut.block15_reg); + $display(""); + + $display("Digest registers:"); + $display("digest_reg = 0x%040x", dut.digest_reg); + $display(""); + end + endtask // dump_top_state + + + //---------------------------------------------------------------- + // dump_core_state() // - // Dump the state of the dump when needed. + // Dump the state of the core inside the dut. //---------------------------------------------------------------- - task dump_dut_state(); + task dump_core_state(); begin + $display("State of core"); + $display("-------------"); + $display("Inputs and outputs:"); + $display("init = 0x%01x, next = 0x%01x", + dut.core.init, dut.core.next); + $display("block = 0x%0128x", dut.core.block); + + $display("ready = 0x%01x, valid = 0x%01x", + dut.core.ready, dut.core.digest_valid); + $display("digest = 0x%040x", dut.core.digest); + $display("H0_reg = 0x%08x, H1_reg = 0x%08x, H2_reg = 0x%08x, H3_reg = 0x%08x, H4_reg = 0x%08x", + dut.core.H0_reg, dut.core.H1_reg, dut.core.H2_reg, dut.core.H3_reg, dut.core.H4_reg); + $display(""); + + $display("Control signals and counter:"); + $display("sha1_ctrl_reg = 0x%01x", dut.core.sha1_ctrl_reg); + $display("digest_init = 0x%01x, digest_update = 0x%01x", + dut.core.digest_init, dut.core.digest_update); + $display("state_init = 0x%01x, state_update = 0x%01x", + dut.core.state_init, dut.core.state_update); + $display("first_block = 0x%01x, ready_flag = 0x%01x, w_init = 0x%01x", + dut.core.first_block, dut.core.ready_flag, dut.core.w_init); + $display("round_ctr_inc = 0x%01x, round_ctr_rst = 0x%01x, round_ctr_reg = 0x%02x", + dut.core.round_ctr_inc, dut.core.round_ctr_rst, dut.core.round_ctr_reg); + $display(""); + + $display("State registers:"); + $display("a_reg = 0x%08x, b_reg = 0x%08x, c_reg = 0x%08x, d_reg = 0x%08x, e_reg = 0x%08x", + dut.core.a_reg, dut.core.b_reg, dut.core.c_reg, dut.core.d_reg, dut.core.e_reg); + $display("a_new = 0x%08x, b_new = 0x%08x, c_new = 0x%08x, d_new = 0x%08x, e_new = 0x%08x", + dut.core.a_new, dut.core.b_new, dut.core.c_new, dut.core.d_new, dut.core.e_new); + $display(""); + + $display("State update values:"); + $display("f = 0x%08x, k = 0x%08x, t = 0x%08x, w = 0x%08x,", + dut.core.state_logic.f, dut.core.state_logic.k, dut.core.state_logic.t, dut.core.w); + $display(""); end - endtask // dump_dut_state + endtask // dump_core_state //---------------------------------------------------------------- @@ -238,7 +328,7 @@ module tb_sha1(); // the word read will be available in the global variable // read_data. //---------------------------------------------------------------- - task read_word(input [7 : 0] address); + task read_word(input [7 : 0] address); begin tb_address = address; tb_cs = 1; @@ -247,7 +337,7 @@ module tb_sha1(); read_data = tb_data_out; tb_cs = 0; - if (DEBUG) + if (DEBUG_TOP) begin $display("*** Reading 0x%08x from 0x%02x.", read_data, address); $display(""); @@ -264,7 +354,7 @@ module tb_sha1(); task write_word(input [7 : 0] address, input [31 : 0] word); begin - if (DEBUG) + if (DEBUG_TOP) begin $display("*** Writing 0x%08x to 0x%02x.", word, address); $display(""); @@ -363,8 +453,9 @@ module tb_sha1(); // // Perform test of a single block digest. //---------------------------------------------------------------- - task single_block_test([511 : 0] block, - [159 : 0] expected); + task single_block_test(input [511 : 0] block, + input [159 : 0] expected + ); begin $display("*** TC%01d - Single block test started.", tc_ctr); @@ -398,10 +489,10 @@ module tb_sha1(); // Perform test of a double block digest. Note that we check // the digests for both the first and final block. //---------------------------------------------------------------- - task double_block_test([511 : 0] block0, - [159 : 0] expected0, - [511 : 0] block1, - [159 : 0] expected1 + task double_block_test(input [511 : 0] block0, + input [159 : 0] expected0, + input [511 : 0] block1, + input [159 : 0] expected1 ); begin $display("*** TC%01d - Double block test started.", tc_ctr); |