diff options
| -rw-r--r-- | README.md.gpg | bin | 508 -> 0 bytes | |||
| -rw-r--r-- | src/rtl/i2c.v | 217 | ||||
| -rw-r--r-- | src/rtl/i2c_core.v | 12 | ||||
| -rw-r--r-- | src/rtl/i2c_regs.v | 127 |
4 files changed, 133 insertions, 223 deletions
diff --git a/README.md.gpg b/README.md.gpg Binary files differdeleted file mode 100644 index 12790ea..0000000 --- a/README.md.gpg +++ /dev/null diff --git a/src/rtl/i2c.v b/src/rtl/i2c.v deleted file mode 100644 index 4a3bc5d..0000000 --- a/src/rtl/i2c.v +++ /dev/null @@ -1,217 +0,0 @@ -//====================================================================== -// -// i2c.v -// ------ -// Top level wrapper for the i2c core. -// -// A simple I2C interface. -// -// -// Author: Joachim Strombergson -// Copyright (c) 2014, SUNET -// -// Redistribution and use in source and binary forms, with or -// without modification, are permitted provided that the following -// conditions are met: -// -// 1. Redistributions of source code must retain the above copyright -// notice, this list of conditions and the following disclaimer. -// -// 2. Redistributions in binary form must reproduce the above copyright -// notice, this list of conditions and the following disclaimer in -// the documentation and/or other materials provided with the -// distribution. -// -// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -// FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -// COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -// BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -// LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, -// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) -// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF -// ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -// -//====================================================================== - -module i2c( - input wire clk, - input wire reset_n, - - // External interface. - input wire SCL, - input wire SDA, - output wire SDA_pd, - output wire [6:0] i2c_device_addr, - - // Internal receive interface. - output wire rxd_syn, - output [7 : 0] rxd_data, - input wire rxd_ack, - - // Internal transmit interface. - input wire txd_syn, - input wire [7 : 0] txd_data, - output wire txd_ack, - - // API interface. - input wire cs, - input wire we, - input wire [7 : 0] address, - input wire [31 : 0] write_data, - output wire [31 : 0] read_data, - output wire error, - - // Debug output. - output wire [7 : 0] debug - ); - - - //---------------------------------------------------------------- - // Internal constant and parameter definitions. - //---------------------------------------------------------------- - // API addresses. - parameter ADDR_CORE_NAME0 = 8'h00; - parameter ADDR_CORE_NAME1 = 8'h01; - parameter ADDR_CORE_TYPE = 8'h02; - parameter ADDR_CORE_VERSION = 8'h03; - - // Core ID constants. - parameter CORE_NAME0 = 32'h69326320; // "i2c " - parameter CORE_NAME1 = 32'h20202020; // " " - parameter CORE_TYPE = 32'h20202031; // " 1" - parameter CORE_VERSION = 32'h302e3031; // "0.01" - - //---------------------------------------------------------------- - // Wires. - //---------------------------------------------------------------- - - wire core_SCL; - wire core_SDA; - wire core_SDA_pd; - - wire core_rxd_syn; - wire [7 : 0] core_rxd_data; - wire core_rxd_ack; - - wire core_txd_syn; - wire [7 : 0] core_txd_data; - wire core_txd_ack; - - reg [31 : 0] tmp_read_data; - reg tmp_error; - - - //---------------------------------------------------------------- - // Concurrent connectivity for ports etc. - //---------------------------------------------------------------- - assign core_SCL = SCL; - assign core_SDA = SDA; - assign SDA_pd = core_SDA_pd; - - assign rxd_syn = core_rxd_syn; - assign rxd_data = core_rxd_data; - assign core_rxd_ack = rxd_ack; - - assign core_txd_syn = txd_syn; - assign core_txd_data = txd_data; - assign txd_ack = core_txd_ack; - - assign read_data = tmp_read_data; - assign error = tmp_error; - - assign debug = core_rxd_data; - - - //---------------------------------------------------------------- - // core - // - // Instantiation of the i2c core. - //---------------------------------------------------------------- - i2c_core core( - .clk(clk), - .reset(reset_n), - - // External data interface - .SCL(core_SCL), - .SDA(core_SDA), - .SDA_pd(core_SDA_pd), - .i2c_device_addr(i2c_device_addr), - - // Internal receive interface. - .rxd_syn(core_rxd_syn), - .rxd_data(core_rxd_data), - .rxd_ack(core_rxd_ack), - - // Internal transmit interface. - .txd_syn(core_txd_syn), - .txd_data(core_txd_data), - .txd_ack(core_txd_ack) - ); - - - //---------------------------------------------------------------- - // api - // - // The core API that allows an internal host to control the - // core functionality. - //---------------------------------------------------------------- - always @* - begin: api - // Default assignments. - tmp_read_data = 32'h00000000; - tmp_error = 0; - - if (cs) - begin - if (we) - begin - // Write operations. - case (address) - default: - begin - tmp_error = 1; - end - endcase // case (address) - end - else - begin - // Read operations. - case (address) - ADDR_CORE_NAME0: - begin - tmp_read_data = CORE_NAME0; - end - - ADDR_CORE_NAME1: - begin - tmp_read_data = CORE_NAME1; - end - - ADDR_CORE_TYPE: - begin - tmp_read_data = CORE_TYPE; - end - - ADDR_CORE_VERSION: - begin - tmp_read_data = CORE_VERSION; - end - - default: - begin - tmp_error = 1; - end - endcase // case (address) - end - end - end - -endmodule // i2c - -//====================================================================== -// EOF i2c.v -//====================================================================== diff --git a/src/rtl/i2c_core.v b/src/rtl/i2c_core.v index 89bcba7..798c105 100644 --- a/src/rtl/i2c_core.v +++ b/src/rtl/i2c_core.v @@ -156,7 +156,7 @@ module i2c_core ( end always @ (*) begin - case (I2C_cstate) //synthesis parallel_case full_case + case (I2C_cstate) I2C_START: begin // wait for the start condition I2C_nstate = ((SDA_cstate == SDA_FALL) && (SCL_cstate == SCL_HIGH)) ? I2C_DADDR : I2C_START; end @@ -238,7 +238,7 @@ module i2c_core ( SDA_pd <= 1'b0; I2C_rdata <= 8'b0; end else begin - case (I2C_cstate) // synthesis parallel_case full_case + case (I2C_cstate) I2C_START: begin // everything in reset I2C_bitcnt <= 4'b0; I2C_daddr <= 8'b0; @@ -437,7 +437,7 @@ module i2c_core ( end always @ (*) begin - case (SCL_cstate) //synthesis parallel_case full_case + case (SCL_cstate) SCL_HIGH: begin SCL_nstate = ((SCL_rfcnt > TRF_CYCLES) && (SCL_sync == 1'b0)) ? SCL_FALL : SCL_HIGH; end @@ -457,7 +457,7 @@ module i2c_core ( if( reset ) begin SCL_rfcnt <= 5'b0; end else begin - case (SCL_cstate) // synthesis parallel_case full_case + case (SCL_cstate) SCL_HIGH: begin if( SCL_sync == 1'b1 ) begin SCL_rfcnt <= 5'b0; @@ -520,7 +520,7 @@ module i2c_core ( end always @ (*) begin - case (SDA_cstate) //synthesis parallel_case full_case + case (SDA_cstate) SDA_HIGH: begin SDA_nstate = ((SDA_rfcnt > TRF_CYCLES) && (SDA_sync == 1'b0)) ? SDA_FALL : SDA_HIGH; end @@ -540,7 +540,7 @@ module i2c_core ( if( reset ) begin SDA_rfcnt <= 5'b0; end else begin - case (SDA_cstate) // synthesis parallel_case full_case + case (SDA_cstate) SDA_HIGH: begin if( SDA_sync == 1'b1 ) begin SDA_rfcnt <= 5'b0; diff --git a/src/rtl/i2c_regs.v b/src/rtl/i2c_regs.v new file mode 100644 index 0000000..e5ddb34 --- /dev/null +++ b/src/rtl/i2c_regs.v @@ -0,0 +1,127 @@ +//====================================================================== +// +// i2c.v +// ------ +// Configuration registers for the i2c core. +// +// +// Author: Joachim Strombergson +// Copyright (c) 2014, SUNET +// +// Redistribution and use in source and binary forms, with or +// without modification, are permitted provided that the following +// conditions are met: +// +// 1. Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// 2. Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in +// the documentation and/or other materials provided with the +// distribution. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +// FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +// COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +// BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +// LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, +// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +// ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +//====================================================================== + +module comm_regs + ( + input wire clk, + input wire rst, + + input wire cs, + input wire we, + + input wire [ 7 : 0] address, + input wire [31 : 0] write_data, + output wire [31 : 0] read_data + ); + + + //---------------------------------------------------------------- + // Internal constant and parameter definitions. + //---------------------------------------------------------------- + // API addresses. + localparam ADDR_CORE_NAME0 = 8'h00; + localparam ADDR_CORE_NAME1 = 8'h01; + localparam ADDR_CORE_VERSION = 8'h02; + localparam ADDR_DUMMY_REG = 8'hFF; // general-purpose register + + // Core ID constants. + localparam CORE_NAME0 = 32'h69326320; // "i2c " + localparam CORE_NAME1 = 32'h20202020; // " " + localparam CORE_VERSION = 32'h302e3130; // "0.10" + + + //---------------------------------------------------------------- + // Wires. + //---------------------------------------------------------------- + reg [31: 0] tmp_read_data; + + // dummy register to check that you can actually write something + reg [31: 0] reg_dummy; + + + //---------------------------------------------------------------- + // Concurrent connectivity for ports etc. + //---------------------------------------------------------------- + assign read_data = tmp_read_data; + + + //---------------------------------------------------------------- + // Access Handler + //---------------------------------------------------------------- + always @(posedge clk) + // + if (rst) begin + reg_dummy <= {32{1'b0}}; + end + else if (cs) begin + // + if (we) begin + // + // WRITE handler + // + case (address) + ADDR_DUMMY_REG: + reg_dummy <= write_data; + endcase + // + end else begin + // + // READ handler + // + case (address) + ADDR_CORE_NAME0: + tmp_read_data <= CORE_NAME0; + ADDR_CORE_NAME1: + tmp_read_data <= CORE_NAME1; + ADDR_CORE_VERSION: + tmp_read_data <= CORE_VERSION; + ADDR_DUMMY_REG: + tmp_read_data <= reg_dummy; + // + default: + tmp_read_data <= {32{1'b0}}; // read non-existent locations as zeroes + endcase + // + end + // + end + +endmodule + +//====================================================================== +// EOF i2c_regs.v +//====================================================================== |