diff options
Diffstat (limited to 'src/tb')
| -rw-r--r-- | src/tb/tb_fmc_core_selector.v | 367 |
1 files changed, 367 insertions, 0 deletions
diff --git a/src/tb/tb_fmc_core_selector.v b/src/tb/tb_fmc_core_selector.v new file mode 100644 index 0000000..9c0c6ca --- /dev/null +++ b/src/tb/tb_fmc_core_selector.v @@ -0,0 +1,367 @@ +//------------------------------------------------------------------------------ +// +// tb_fmc_core_selector.v +// ----------------------------------------------------------------------------- +// Testbench for fixed latency FMC arbiter. +// +// Authors: Pavel Shatov +// +// Copyright (c) 2018-2019, NORDUnet A/S +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions are met: +// +// - Redistributions of source code must retain the above copyright notice, +// this list of conditions and the following disclaimer. +// +// - Redistributions in binary form must reproduce the above copyright notice, +// this list of conditions and the following disclaimer in the documentation +// and/or other materials provided with the distribution. +// +// - Neither the name of the NORDUnet nor the names of its contributors may be +// used to endorse or promote products derived from this software without +// specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE +// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +// POSSIBILITY OF SUCH DAMAGE. +// +//------------------------------------------------------------------------------ + +//------------------------------------------------------------------------------ +`timescale 1ns / 1ps +//------------------------------------------------------------------------------ + +module tb_fmc_core_selector; + + + // + // Settings + // + localparam integer NUM_TESTS = 100; + + + // + // STM32 Settings + // + localparam integer STM32_FMC_LATENCY = 6; + + + // + // Clock + // + + /* actual hardware uses 45 MHz, we use 50 for convenience */ + + localparam FMC_CLOCK_PERIOD = 20.0; + localparam FMC_CLOCK_PERIOD_HALF = 0.5 * FMC_CLOCK_PERIOD; + localparam FMC_CLOCK_PERIOD_QUARTER = 0.5 * FMC_CLOCK_PERIOD_HALF; + + reg fmc_clk = 1'b0; + + initial forever #FMC_CLOCK_PERIOD_HALF fmc_clk = ~fmc_clk; + + + // + // Clock Manager + // + wire io_clk; + wire sys_clk; + wire sys_rst_n; + wire core_clk; + + alpha_clkmgr clkmgr_inst + ( + .fmc_clk (fmc_clk), + + .io_clk (io_clk), + .sys_clk (sys_clk), + .sys_rst_n (sys_rst_n), + .core_clk (core_clk) + ); + + + // + // FMC Arbiter - FPGA Side + // + wire [23: 0] sys_fmc_addr; + wire sys_fmc_wren; + wire sys_fmc_rden; + wire [31: 0] sys_fmc_dout; + wire [31: 0] sys_fmc_din; + + + // + // FMC Arbiter - STM32 Side + // + reg [23: 0] fmc_a = {24{1'bX}}; + reg [31: 0] fmc_d_drive; + wire [31: 0] fmc_d_bidir; + reg fmc_ne1 = 1'b1; + reg fmc_noe = 1'b1; + reg fmc_nwe = 1'b1; + reg fmc_nl = 1'b1; + wire fmc_nwait_dummy; + + assign fmc_d_bidir = fmc_noe ? fmc_d_drive : 32'hZZZZZZZZ; + + fmc_arbiter #(.NUM_ADDR_BITS(24)) + uut + ( + // fmc bus + .fmc_a (fmc_a), + .fmc_d (fmc_d_bidir), + .fmc_ne1 (fmc_ne1), + .fmc_nl (fmc_nl), + .fmc_nwe (fmc_nwe), + .fmc_noe (fmc_noe), + .fmc_nwait (fmc_nwait_dummy), + + // system clock, i/o clock + .io_clk (io_clk), + .sys_clk (sys_clk), + + // user bus + .sys_addr (sys_fmc_addr), + .sys_wr_en (sys_fmc_wren), + .sys_data_out (sys_fmc_dout), + .sys_rd_en (sys_fmc_rden), + .sys_data_in (sys_fmc_din) + ); + + + // + // Core Selector + // + core_selector core_selector_inst + ( + .sys_clk (sys_clk), + .sys_rst_n (sys_rst_n), + + .sys_fmc_addr (sys_fmc_addr), + .sys_fmc_wr (sys_fmc_wren), + .sys_fmc_rd (sys_fmc_rden), + .sys_read_data (sys_fmc_din), + .sys_write_data (sys_fmc_dout), + .sys_error (), + + .mkm_sclk (), + .mkm_cs_n (), + .mkm_do (1'bZ), + .mkm_di (), + + .core_clk (core_clk), + + .noise (1'bZ), + .debug () + ); + + + // + // "Random" Number Generator + // + reg [7:0] lfsr8; + + task lfsr8_next; + lfsr8 = {lfsr8[6:0], lfsr8[8-1] ^ lfsr8[6-1] ^ lfsr8[5-1] ^ lfsr8[4-1]}; + endtask + + task lfsr8_seed; + input [7:0] lfsr8_in; + lfsr8 = lfsr8_in; + endtask + + + // + // Helper Tasks + // + + //---------------------- + task wait_quarter_tick; + //---------------------- + #FMC_CLOCK_PERIOD_QUARTER; + endtask + + //------------------ + task wait_half_tick; + //------------------ + begin + wait_quarter_tick; + wait_quarter_tick; + end + endtask + + //------------------ + task wait_full_tick; + //------------------ + begin + wait_half_tick; + wait_half_tick; + end + endtask + + //---------------- + task wait_n_ticks; + //---------------- + input integer n; + integer i; + for (i=0; i<n; i=i+1) + wait_full_tick; + endtask + + //------------- + task fmc_write; + //------------- + input [15: 0] core; + input [ 7: 0] offset; + input [31: 0] data; + begin + fmc_ne1 = 1'b0; // select + fmc_nl = 1'b0; // set latch flag + fmc_a = {core, offset}; // set address + fmc_nwe = 1'b0; // set write-enable + wait_full_tick(); // mimic latency + + fmc_nl = 1'b1; // clear latch flag + fmc_a = {24{1'bX}}; // clear address + wait_n_ticks(STM32_FMC_LATENCY); // mimic latency + + fmc_d_drive = data; // set data + + wait_half_tick(); // mimic latency + wait_quarter_tick(); + + fmc_ne1 = 1'b1; // deselect + fmc_nwe = 1'b1; // clear write-enable + fmc_d_drive = 32'hXXXXXXXX; // clear data + + wait_quarter_tick(); // finish clock period + wait_full_tick(); // pause + end + endtask + + //------------ + task fmc_read; + //------------ + input [15: 0] core; + input [ 7: 0] offset; + output [31: 0] data; + begin + fmc_ne1 = 1'b0; // select + fmc_nl = 1'b0; // set latch flag + fmc_a = {core, offset}; // set address + + wait_full_tick(); // mimic latency + + fmc_nl = 1'b1; // clear latch flag + fmc_a = {24{1'bX}}; // clear address + wait_full_tick(); // mimic latency + fmc_noe = 1'b0; // tri-state bus + wait_n_ticks(STM32_FMC_LATENCY-1); // mimic latency + + wait_half_tick(); // mimic latency + data = fmc_d_bidir; // sample data + wait_half_tick(); // mimic latency + + wait_full_tick(); // mimic latency + + wait_half_tick(); // mimic latency + wait_quarter_tick(); + + fmc_ne1 = 1'b1; // deselect + fmc_noe = 1'b1; // drive bus + + wait_quarter_tick(); // finish clock period + wait_full_tick(); // pause + end + endtask + + //---------------- + task gen_rnd_addr; + //---------------- + output [31:0] addr; + reg [7:0] a, b, c; + begin + lfsr8_next; a = lfsr8; + lfsr8_next; b = lfsr8; + lfsr8_next; c = lfsr8; + addr = {a, b, c}; + end + endtask + + //---------------- + task gen_rnd_data; + //---------------- + output [31:0] data; + reg [7:0] a, b, c, d; + begin + lfsr8_next; a = lfsr8; + lfsr8_next; b = lfsr8; + lfsr8_next; c = lfsr8; + lfsr8_next; d = lfsr8; + data = {a, b, c, d}; + end + endtask + + + // + // Script + // + reg [23:0] addr; + reg [31:0] data_wr; + reg [31:0] data_rd; + integer i; + initial begin + + // let all signals initialize + wait_full_tick; + + // wait for reset to complete + while (!sys_rst_n) begin + wait_full_tick; + end + + // wait some more time + wait_n_ticks(100); + + // do tests + lfsr8_seed(8'hA5); + for (i=0; i<NUM_TESTS; i=i+1) begin + gen_rnd_data(data_wr); + fmc_write(16'h0000, 8'd255, data_wr); + fmc_read(16'h0000, 8'd255, data_rd); + $display("Read %04d/%04d: 0x%x | 0x%x", i+1, NUM_TESTS, data_rd, data_wr); + if (data_rd !== data_wr) begin + $display("ERROR"); + $finish; + end + gen_rnd_data(data_wr); + fmc_write(16'h0037, 8'd15, data_wr); + fmc_read(16'h0037, 8'd15, data_rd); + $display(" 0x%x | 0x%x", data_rd, data_wr); + if (data_rd !== data_wr) begin + $display("ERROR"); + $finish; + end + end + + $display("All tests passed. [OK]"); + $finish; + + end + + +endmodule + + +//------------------------------------------------------------------------------ +// End-of-File +//------------------------------------------------------------------------------ |