//======================================================================
//
// fmc.v
// ------
// Configuration registers for the fmc core.
//
//
// Author: Joachim Strombergson
// Copyright (c) 2015, NORDUnet A/S All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
// - Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// - Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
//
// - Neither the name of the NORDUnet nor the names of its contributors may
// be used to endorse or promote products derived from this software
// without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
//======================================================================
module comm_regs
(
// Clock and reset.
input wire clk,
input wire reset_n,
// Control.
input wire cs,
input wire we,
// Data ports.
input wire [ 7 : 0] address,
input wire [31 : 0] write_data,
output wire [31 : 0] read_data,
output wire error
);
//----------------------------------------------------------------
// Internal constant and parameter definitions.
//----------------------------------------------------------------
// API addresses.
localparam ADDR_CORE_NAME0 = 8'h00;
localparam ADDR_CORE_NAME1 = 8'h01;
localparam ADDR_CORE_VERSION = 8'h02;
// Core ID constants.
localparam CORE_NAME0 = 32'h666d6320; // "fmc "
localparam CORE_NAME1 = 32'h20202020; // " "
localparam CORE_VERSION = 32'h302e3130; // "0.10"
//----------------------------------------------------------------
// Wires.
//----------------------------------------------------------------
reg [31: 0] tmp_read_data;
reg write_error;
reg read_error;
//----------------------------------------------------------------
// Concurrent connectivity for ports etc.
//----------------------------------------------------------------
assign read_data = tmp_read_data;
assign error = write_error | read_error;
//----------------------------------------------------------------
// storage registers for mapping memory to core interface
//----------------------------------------------------------------
always @ (posedge clk)
begin
write_error <= 0;
if (cs && we)
begin
// write operations
case (address)
// no writeable registers
default:
write_error <= 1;
endcase
end
end
always @*
begin
tmp_read_data = 32'h00000000;
read_error = 0;
if (cs && !we)
begin
// read operations
case (address)
ADDR_CORE_NAME0:
tmp_read_data = CORE_NAME0;
ADDR_CORE_NAME1:
tmp_read_data = CORE_NAME1;
ADDR_CORE_VERSION:
tmp_read_data = CORE_VERSION;
default:
read_error = 1;
endcase
end
end
endmodule
//======================================================================
// EOF fmc_regs.v
//======================================================================
