[[PageOutline(2-5,Contents,pullout)]]
Trac is extensible with [trac:PluginList plugins]. Plugin functionality is based on the [trac:TracDev/ComponentArchitecture component architecture], with special cases described in the [trac:TracDev/PluginDevelopment plugin development] page.
From the user's point of view, a plugin is either a standalone .py file or an .egg package. Trac looks for plugins in Python's site-packages
directory, the [TracIni#GlobalConfiguration global shared] plugins
directory and the [TracEnvironment project environment] plugins
directory. Components defined in globally-installed plugins must be explicitly enabled in the [[TracIni#components-section| [components] ]] section of the trac.ini
file. Components defined in the plugins
directory of the project environment are enabled, unless explicitly disabled in the [components]
section of the trac.ini
file.
To use egg-based plugins in Trac, you need to have setuptools (version >= 0.6) installed.
To install setuptools
, download the bootstrap module ez_setup.py and execute it as follows:
```#!sh
$ python ez_setup.py
If the `ez_setup.py` script fails to install the setuptools release, you can download it from [pypi:setuptools PyPI] and install it manually.
Plugins can also consist of a single `.py` file dropped directly into either the project's or the shared `plugins` directory.
## Installing a Trac plugin
The instructions below are applicable to a plugin packaged as an egg. Plugins implemented as a single `py` file should be downloaded and copied to the [TracEnvironment project environment] `plugins` directory or the [TracIni#GlobalConfiguration global shared] plugins directory.
### For a single project
If you have downloaded a source distribution of a plugin, and want to build the `.egg` file:
* Unpack the source. It should provide `setup.py`.
* Run:
```#!sh
$ python setup.py bdist_egg
You should now have an *.egg file. Examine the output of running Python to find where this was created.
Once you have the plugin archive, copy it into the plugins
directory of the [wiki:TracEnvironment project environment]. Also, make sure that the web server has sufficient permissions to read the plugin egg. Then restart the web server. If you are running as a [wiki:TracStandalone "tracd" standalone server], restart tracd, ie kill the process and run again.
To uninstall a plugin installed this way, remove the egg from the plugins
directory and restart the web server.
Note: the Python version that the egg is built with must match the Python version with which Trac is run. For example, if you are running Trac under Python 2.6, but have upgraded your standalone Python to 2.7, the eggs won't be recognized.
Note: in a multi-project setup, a pool of Python interpreter instances will be dynamically allocated to projects based on need; since plugins occupy a place in Python's module system, the first version of any given plugin to be loaded will be used for all projects. In other words, you cannot use different versions of a single plugin in two projects of a multi-project setup. It may be safer to install plugins for all projects (see below), and then enable them selectively on a project-by-project basis.
Some plugins, such as TracTags, are downloadable as an .egg
file that can be installed with easy_install
or pip
:
```#!sh
$ easy_install TracTags
$ pip install TracTags
If `easy_install` is not on your system, see the Requirements section above to install it. Windows users will need to add the `Scripts` directory of their Python installation (for example, `C:\Python27\Scripts`) to their `PATH` environment variable, or use the full path to `easy_install` (for example, `C:\Python27\Scripts\easy_install.py`). See [easy_install Windows notes](http://peak.telecommunity.com/DevCenter/EasyInstall#windows-notes) for more information.
`pip` is included in Python 2.7.9. In earlier versions of Python it can be installed through the package manager of your OS (e.g. `apt-get install python-pip`) or using the [get_pip.py](https://pip.pypa.io/en/latest/installing.html#install-pip).
If Trac reports permission errors after installing a zipped egg, and you would rather not bother providing an egg cache directory writable by the web server, you can get around it by simply unzipping the egg. Just pass `--always-unzip` to `easy_install`:
```#!sh
$ easy_install --always-unzip TracTags
You should end up with a directory having the same name as the zipped egg, complete with .egg
extension, and containing its uncompressed contents.
Trac also searches for plugins installed in the shared plugins directory, see TracIni#GlobalConfiguration. This is a convenient way to share the installation of plugins across several, but not all, environments.
easy_install
makes installing from source a snap. Just give it the URL to either a Subversion repository or a tarball/zip of the source:
```#!sh
$ easy_install https://trac-hacks.org/svn/tagsplugin/trunk
#### Enabling the plugin
Unlike plugins installed per environment, you'll have to explicitly enable globally installed plugins via [wiki:TracIni trac.ini]. This also applies to plugins installed in the shared plugins directory, ie the path specified in the `[inherit] plugins_dir` configuration option.
This is done in the `[components]` section of the configuration file `trac.ini`. For example:
```#!ini
[components]
tractags.* = enabled
The name of the option is the Python package of the plugin. This should be specified in the documentation of the plugin, but can also be easily discovered by looking at the source: look for a top-level directory that contains a file named __init__.py
.
After installing the plugin, you must restart your web server.
Some plugins may require an environment upgrade. This will typically be necessary for plugins that implement IEnvironmentSetupParticipant
. Common reasons for requiring an environment upgrade are to add tables to the database or add configuration parameters to trac.ini. A notification will be displayed when accessing Trac for the first time after installing a plugin and restarting the web server. To upgrade the environment, run the command:
```#!sh
$ trac-admin /path/to/env upgrade
A database backup will be made before upgrading the environment, unless the `--no-backup` option is specified. For more information, refer to the documentation output by `trac-admin /path/to/env help upgrade`.
#### Uninstalling
Neither `easy_install` nor `python setup.py` have an uninstall feature. However, it is usually trivial to remove a globally installed egg and reference:
1. Do `easy_install -m [plugin name]` to remove references from `$PYTHONLIB/site-packages/easy-install.pth` when the plugin installed by setuptools.
1. Delete executables from `/usr/bin`, `/usr/local/bin`, or `C:\\Python*\Scripts`. To find what executables are involved, refer to the `[console-script]` section of `setup.py`.
1. Delete the .egg file or folder from where it's installed, usually inside `$PYTHONLIB/site-packages/`.
1. Restart the web server.
If you are uncertain about the location of the egg file, you can try to locate it by replacing `myplugin` with whatever namespace the plugin uses (as used when enabling the plugin):
```#!pycon
>>> import myplugin
>>> print myplugin.__file__
/opt/local/python24/lib/site-packages/myplugin-0.4.2-py2.4.egg/myplugin/__init__.pyc
Some plugins will need to be extracted by the Python egg's runtime (pkg_resources
), so that their contents are actual files on the file system. The directory in which they are extracted defaults to .python-eggs
in the home directory of the current user, which may or may not be a problem. You can, however, override the default location using the PYTHON_EGG_CACHE
environment variable.
To do this from the Apache configuration, use the SetEnv
directive:
```#!apache
SetEnv PYTHON_EGG_CACHE /path/to/dir
This works whether you're using the [wiki:TracCgi CGI] or the [wiki:TracModPython mod_python] front-end. Put this directive next to where you set the path to the [wiki:TracEnvironment Trac environment], ie in the same `<Location>` block.
For example for CGI:
```#!apache
<Location /trac>
SetEnv TRAC_ENV /path/to/projenv
SetEnv PYTHON_EGG_CACHE /path/to/dir
</Location>
Or for mod_python:
```#!apache
SetHandler mod_python
...
SetEnv PYTHON_EGG_CACHE /path/to/dir
**Note**: SetEnv requires the `mod_env` module, which needs to be activated for Apache. In this case the SetEnv directive can also be used in the `mod_python` Location block.
For [wiki:TracFastCgi FastCGI], you'll need to `-initial-env` option, or whatever is provided by your web server for setting environment variables.
**Note**: if you already use -initial-env to set the project directory for either a single project or parent, you will need to add an additional -initial-env directive to the FastCgiConfig directive:
```#!apache
FastCgiConfig -initial-env TRAC_ENV=/var/lib/trac -initial-env PYTHON_EGG_CACHE=/var/lib/trac/plugin-cache
If you have set up some Subversion hook scripts that call the Trac engine, such as the post-commit hook script provided in the /contrib
directory, make sure you define the PYTHON_EGG_CACHE
environment variable within these scripts as well.
The [trac:WebAdmin] interface offers limited support for plugin configuration through the web to users with TRAC_ADMIN
permission:
- en/disabling installed plugins
- installing plugins by uploading them as eggs
If you wish to disable the second function for security reasons, add the following to your trac.ini
file:
```#!ini
[components]
trac.admin.web_ui.PluginAdminPanel = disabled
This disables the whole panel, so the first function will no longer be available either.
## Troubleshooting
### Is setuptools properly installed?
Try this from the command line:
```#!sh
$ python -c "import pkg_resources"
If you get no output, setuptools is installed. Otherwise, you'll need to install it before plugins will work in Trac.
Python eggs have the Python version encoded in their filename. For example, MyPlugin-1.0-py2.5.egg
is an egg for Python 2.5, and will not be loaded if you're running a different Python version (such as 2.4 or 2.6).
Also, verify that the egg file you downloaded is indeed a .zip archive. If you downloaded it from a Trac site, chances are you downloaded the HTML preview page instead.
If you install a plugin globally, ie not inside the plugins
directory of the Trac project environment, you must explicitly enable it in [TracIni trac.ini]. Make sure that:
* you actually added the necessary line(s) to the `[components]` section.
* the package/module names are correct and do not contain typos.
* the value is "enabled", not "enable" or "Enable".
* the section name is "components", not "component".
Trac must be able to read the .egg file.
Enable [wiki:TracLogging logging] and set the log level to DEBUG
, then watch the log file for messages about loading plugins.
Some plugins require you have special permissions in order to use them. [trac:WebAdmin WebAdmin], for example, requires the user to have TRAC_ADMIN
permissions for it to show up on the navigation bar.
If you put your plugins inside plugins directories, and certainly if you have more than one project, you need to make sure that the correct version of the plugin is loading. Here are some basic rules:
* Only one version of the plugin can be loaded for each running Trac server, ie each Python process. The Python namespaces and module list will be shared, and it cannot handle duplicates. Whether a plugin is `enabled` or `disabled` makes no difference.
* A globally installed plugin (typically `setup.py install`) will override any version in the global or project plugins directories. A plugin from the global plugins directory will be located *before* any project plugins directory.
* If your Trac server hosts more than one project (as with `TRAC_ENV_PARENT_DIR` setups), having two versions of a plugin in two different projects will give unpredicatable results. Only one of them will load, and the one loaded will be shared by both projects. Trac will load the first plugin found, usually from the project that receives the first request.
* Having more than one version listed inside Python site-packages is fine, ie installed with `setup.py install`, because setuptools will make sure you get the version installed most recently. However, don't store more than one version inside a global or project plugins directory: neither the version number nor the installed date will matter at all. There is no way to determine which one will be located first when Trac searches the directory for plugins.
Okay, so the logs don't mention plugins, the egg is readable, the Python version is correct, and the egg has been installed globally (and is enabled in trac.ini)... and it still doesn't work or give any error messages or any other indication as to why. Hop on the [trac:IrcChannel IrcChannel] and ask away!
See also TracGuide, [trac:PluginList plugin list], [trac:TracDev/ComponentArchitecture component architecture].