1 files changed, 0 insertions, 145 deletions
diff --git a/wiki/GettingStartedNovena.trac b/wiki/GettingStartedNovena.trac
deleted file mode 100644
index 1de2cef..0000000
--- a/wiki/GettingStartedNovena.trac
+++ /dev/null
@@ -1,145 +0,0 @@
-[[PageOutline]]
-
-= Getting Started on the Novena =
-
-== The Novena Board == 
-
-[[Image(http://bunniefoo.com/novena/pvt1_release/novena_pvt1e_top_sm.jpg)]]
-
-[http://www.kosagi.com/w/index.php?title=Novena_Main_Page Novena] is an open hardware and F/OSS-friendly computing platform. It is a small single-board Linux PC, with a Freescale i.MX6 (ARM
-Cortex-A9) CPU and a Xilinx Spartan-6 LX45 FPGA.
-
-It is available in limited quantities through [https://www.crowdsupply.com/sutajio-kosagi/novena crowd supply].
-
-=== Setting up the Novena ===
-
-The Novena PVT-2 requires some initial setup. You will need to attach a USB keyboard and HDMI monitor.
-
-Once this is done, most of us prefer to run it headless, and ssh in.
-
-You may also want to bring the packages up to date:
-
-{{{
-$ sudo apt-get update
-$ sudo apt-get upgrade
-}}}
-
-== The Avalanche Noise Board ==
-
-[[Image(rev03-on-novena.jpg, 40%)]]
-
-The avalanche noise board is a Novena daughter board that contains a zener-diode noise circuit that can be read directly by the FPGA.
-
-''(More information from FT: block diagram, schematics, ...)''
-
-It is available in limited quantities directly from Fredrik Thulin, and will be distributed at the PrahaWorkshop.
-
-== Binary Packages ==
-
-Cryptech maintains an {{{apt}}} repository, with two binary packages for the Novena:
-* a bitstream, to be configured into the FPGA
-* software, to run on the CPU
-
-=== How to get them ===
-
-All commands are run on the Novena.
-
-1. First, get the hactrn CA certificate:
-
-{{{
-$ wget http://www.hactrn.net/cacert.asc
-}}}
-
-Get the key used to sign the CA certificate.
-
-{{{
-$ gpg --recv-keys 2DC6FF82
-}}}
-
-Validate the CA certificate
-
-{{{
-$ gpg cacert.asc
-}}}
-
-Install the CA certficiate.
-
-{{{
-$ sudo mkdir /usr/share/ca-certificates/hactrn.org
-$ sudo mv cacert /usr/share/ca-certificates/hactrn.org/cacert.crt
-$ sudo dpkg-reconfigure ca-certificates
-}}}
-
-2. Get the repository key.
-
-{{{
-$ wget https://apt.cryptech.is/novena/apt-gpg-key.asc
-}}}
-
-Validate the key.
-
-{{{
-$ id=37A8E93F5D7E7B9A
-$ gpg --recv-key $id
-$ gpg --check-sig $id
-$ gpg --export $id | sudo apt-key add -
-}}}
-
-See the apt-key(8) manual page for more information about the APT key database, including how to remove keys you don't want anymore.
-
-Install the key.
-
-{{{
-$ sudo apt-key add apt-gpg-key.asc
-}}}
-
-3. Get the packages
-
-Configure apt to use the repository.
-
-{{{
-$ sudo wget -q -O /etc/apt/sources.list.d/novena.list http://apt.cryptech.is/novena/sources.list
-}}}
-
-Update the package index file.
-
-{{{
-$ sudo apt-get update
-}}}
-
-Get the cryptech meta-package.
-
-{{{
-$ sudo apt-get install cryptech-novena
-}}}
-
-This installs the {{{cryptech-novena-rtl}}} and {{{cryptech-novena-sw}}} packages.
-
-The {{{cryptech-novena-rtl}}} package includes an {{{init.d}}} script that configures the FPGA on system startup. This script should run automatically as part of the install process.
-
-=== Updating the packages ===
-
-Once you've performed the steps above you should be able to upgrade to newer
-version of the code using the normal APT upgrade process, eg:
-
-{{{
-$ sudo apt-get update
-$ sudo apt-get upgrade
-}}}
-
-== Setting up PKCS!#11 ==
-
-The PKCS11 token is in /usr/lib/libpkcs11.so. In order to start using it you need to set a pin and an SO pin. This you do with p11util thus:
-
-{{{
-(echo 12345678;echo 1234) | sudo p11util --set-so-pin --set-user-pin --pin-from-stdin
-}}}
-
-It is strongly suggested to change the so pin and pin (in that order above) to something sensible. Now your token is ready to use. Your favorite PKCS11-client may or may not work depending on the state of support for PKCS11 function calls - please open tickets for whatever is missing. If you want/need to talk PKCS11 from another host, you could install and configure [[PKCS11Proxy]] on both the novena and your host. Note that currently pkcs11-proxy doesn't handle differing word-lengths so your client-side will have to be 32bit (since the novena is).
-
-
-== Setting up the lab signer ==
-
-The lab DNSSEC signer MUST, at this point, be running on a 32-bit system in order to work with the 32-bit Novena.
-
-[[https://www.dropbox.com/s/f8b4s9vic7hsqyb/cryptech-proxy-lab-20150718r2.pdf]]