1 files changed, 47 insertions, 0 deletions
diff --git a/raw-wiki-dump/GitRepositories%2Ftest%2Fnovena_base.trac b/raw-wiki-dump/GitRepositories%2Ftest%2Fnovena_base.trac
new file mode 100644
index 0000000..efd572e
--- /dev/null
+++ b/raw-wiki-dump/GitRepositories%2Ftest%2Fnovena_base.trac
@@ -0,0 +1,47 @@
+{{{
+#!htmlcomment
+
+This page is maintained automatically by a script.  Don't modify this page by hand,
+your changes will just be overwritten the next time the script runs.  Talk to your
+Friendly Neighborhood Repository Maintainer if you need to change something here.
+
+}}}
+
+{{{
+#!html
+<h1>Cryptech Novena FPGA baseline</h1>
+
+<h2>Introduction</h2>
+
+<p>This repo contains the Novena FPGA baseline developed as part of the
+Cryptech project. The design contains a new FPGA top level, now clock
+implementation and reworked EIM interface.</p>
+
+<p>The main purpose of the baseline is to allow us to run the Cryptech
+cores and FPGA system with the general system clock and then interface
+to the EIM with the EIM burst clock.</p>
+
+<h2>Technical details</h2>
+
+<p>The design tries to be a clean top that is easy for others to work on
+and adapt to their needs. The top is stripped from ports not needed for
+the baseline. All clock and reset implementation is placed in a separate
+module. The EIM interface is in a separate module and then the rest of
+the system is in a third module.</p>
+
+<p>Internally the baseline contains an arbiter to connect cores with a
+32-bit memory like interface to the EIM. Finally there is SW to
+configure the EIM interface as well as talking to a test core in the
+FPGA.</p>
+
+<p>For information about the EIM clocking and the baseline HW and SW
+design, see the documentation.</p>
+
+<h2>Author</h2>
+
+<p>The baseline has been written by Pavel Shatov.</p>
+}}}
+
+[[RepositoryIndex(format=table,glob=test/novena_base)]]
+
+|| Clone `https://git.cryptech.is/test/novena_base.git` ||