aboutsummaryrefslogtreecommitdiff
path: root/raw-wiki-dump/GitRepositories%2Fhardware
diff options
context:
space:
mode:
Diffstat (limited to 'raw-wiki-dump/GitRepositories%2Fhardware')
-rw-r--r--raw-wiki-dump/GitRepositories%2Fhardware50
1 files changed, 0 insertions, 50 deletions
diff --git a/raw-wiki-dump/GitRepositories%2Fhardware b/raw-wiki-dump/GitRepositories%2Fhardware
deleted file mode 100644
index 31b7b78..0000000
--- a/raw-wiki-dump/GitRepositories%2Fhardware
+++ /dev/null
@@ -1,50 +0,0 @@
-{{{
-#!htmlcomment
-
-This page is maintained automatically by a script. Don't modify this page by hand,
-your changes will just be overwritten the next time the script runs. Talk to your
-Friendly Neighborhood Repository Maintainer if you need to change something here.
-
-}}}
-
-{{{
-#!html
-<h1>STM32 firmware for Cryptech Alpha board</h1>
-
-<p>The Alpha board is our first full prototype for an open-source hardware
-security module (HSM). It is a custom board with an STM32 Cortex-M4
-microcontroller and an Artix-7 FPGA, flash-based keystore, separate memory
-for the Key Encryption Key, etc. See the wiki for design documents.</p>
-
-<h1>Copyrights</h1>
-
-<p>The license for all work done on this in the CrypTech project is a
-3-clause BSD license.</p>
-
-<p>The "Noise generator" and "Amplifier" parts of the circuit diagram are
-copied from Benedikt Stockebrand's ARRGH project. </p>
-
-<p>Both copyright statements are included in LICENSE.txt.</p>
-
-<h1>Board Revisions</h1>
-
-<ol>
-<li><p><code>rev01</code> was the "dev-bridge" board, a daughterboard for the Novena,
-which talked to the Novena's FPGA through the high-speed expansion
-connector.</p></li>
-<li><p><code>rev02</code> is the Alpha board, our first full prototype for an open-source
-hardware security module (HSM). It is a custom board with an STM32
-Cortex-M4 microcontroller and an Artix-7 FPGA, flash-based keystore,
-separate memory for the Key Encryption Key, etc.</p>
-
-<p>The board's form factor (4 x 4 in, 101.6 x 101.6 mm) was based on the
-Intel NUC mini-PC, but there were some issues sourcing enough cases, so
-only a few of these boards were made.</p></li>
-<li><p><code>rev03</code> is functionally the same as <code>rev02</code>, but in a Eurocard form
-factor (100 x 120 mm, aka "3Ux120").</p></li>
-</ol>
-}}}
-
-[[RepositoryIndex(format=table,glob=hardware)]]
-
-|| Clone `https://git.cryptech.is/hardware.git` ||