1 files changed, 0 insertions, 136 deletions
diff --git a/raw-wiki-dump/OpenDNSSEC b/raw-wiki-dump/OpenDNSSEC
deleted file mode 100644
index 1526a29..0000000
--- a/raw-wiki-dump/OpenDNSSEC
+++ /dev/null
@@ -1,136 +0,0 @@
-= DNSSEC signing using OpenDNSSEC and a Cryptech alpha board rev03 =
-
-== Before you start, you'll need ==
-
-- A Cryptech Alpha board, preferrably revision "rev03"
-- APT on the host system configured to find packages in the Cryptech
-  repository, see BinaryPackages for instructions
-
-{{{
-apt-get install cryptech-alpha opendnssec opensc
-}}}
-
-Once you have the software package installed, you may need to [wiki:Upgrading upgrade your HSM's firmware].
-
-== Configure the HSM ==
-
-For now, connect USB cables to both the DATA and MGMT ports of your HSM and plug them into the host where you will be running OpenDNSSEC.
-In production use it should not be necessary to leave the MGMT port connected, but it's easier to set up this way, and, as this is still a development platform, this is the configuration that's gotten the most testing.
-
-{{{
-# eval $(cryptech_probe)
-# cryptech_muxd &
-# cryptech_console
-
-Username: wheel
-Password: YouReallyNeedToChangeThisPINRightNowWeAreNotKidding
-
-cryptech> keystore set pin wheel supersikritnewpw
-cryptech> keystore set pin so 123456
-cryptech> keystore set pin user 1234
-
-cryptech> masterkey set EFBEADDE
-^C
-}}}
-
-Leave `cryptech_muxd` running, so that the PKCS !#11 library can use it to talk to the HSM.
-
-
-== Configure OpenDNSSEC ==
-
-{{{
-mkdir /var/lib/opendnssec/cryptech
-
-cat > /var/lib/opendnssec/unsigned/example.com << EOF
-\$TTL 600
-example.com.  IN SOA  hidden-master.example.com. hostmaster.example.com. (
-                                2016041401 ; serial
-                                720        ; 28800      ; refresh (8 hours)
-                                720        ; 7200       ; retry (2 hours)
-                                300        ; 604800     ; expire (1 week)
-                                120        ; 3600       ; minimum (1 hour)
-                                )
-
-               NS      lab.cryptech.is.
-test           A       127.0.0.1
-EOF
-
-chown -R opendnssec: /var/lib/opendnssec/*
-}}}
-
-
-== OpenDNSSEC configuration changes ==
-
-/etc/opendnssec/conf.xml:
-
-{{{
-<Repository name="Cryptech">
-        <Module>/usr/lib/libcryptech-pkcs11.so</Module>
-        <TokenLabel>Cryptech Token</TokenLabel>
-        <PIN>1234</PIN>
-        <SkipPublicKey/>
-</Repository>
-}}}
-
-The PIN is whatever was chosen as PIN for 'user' above.
-The !TokenLabel has to be "Cryptech Token", not something you choose.
-
-
-/etc/opendnssec/kasp.xml:
-
-    s/SoftHSM/Cryptech/
-
-/etc/opendnssec/zonelist.xml:
-
-{{{
-<Zone name="example.com">
-        <Policy>lab</Policy>
-        <SignerConfiguration>/var/lib/opendnssec/signconf/example.com.xml</SignerConfiguration>
-        <Adapters>
-                <Input>
-                        <Adapter type="File">/var/lib/opendnssec/unsigned/example.com</Adapter>
-                </Input>
-                <Output>
-                        <Adapter type="File">/var/lib/opendnssec/signed/example.com</Adapter>
-                </Output>
-        </Adapters>
-</Zone>
-}}}
-
-
-== Initialization and signing ==
-
-Make the deamons reload their configuration:
-
-{{{
-    service opendnssec-enforcer restart
-    service opendnssec-signer restart
-}}}
-
-Initialize opendnssec:
-
-{{{
-    ods-ksmutil setup
-}}}
-
-That should be it!
-
-See /var/log/syslog for output from ods-kaspcheck, ods-enforcerd and ods-signerd.
-See /var/lib/opendnssec/signed/ for a signed example.com zone.
-
-To list keys using ods-ksmutil, accessing the HSM using pkcs11
-directly (rather than going through any of the opendnssec daemons),
-export the environment variables from /etc/default/opendnssec and run
-"ods-ksmutil keys list --verbose":
-
-{{{
-# ods-ksmutil keys list --verbose
-SQLite database set to: /var/lib/opendnssec/kasp.db
-Keys:
-Zone:                           Keytype:      State:    Date of next transition (to):  Size:   Algorithm:  CKA_ID:                           Repository:                       Keytag:
-example.com                     KSK           ready     waiting for ds-seen (active)   2048    8           7f9b9329480ebe5dc81054ccb293e261  Cryptech                          62642
-example.com                     ZSK           active    2016-07-13 19:04:30 (retire)   1024    8           97e972633613bd605944a0531ff5399b  Cryptech                          56620
-}}}
-
-If the output for repository is "Cryptech NOT IN repository",
-ods-ksmutil has not been able to actually list the keys in the HSM.
-\ No newline at end of file