diff options
Diffstat (limited to 'raw-wiki-dump/GitRepositories%2Fuser%2Fjs%2Fmkmif')
| -rw-r--r-- | raw-wiki-dump/GitRepositories%2Fuser%2Fjs%2Fmkmif | 131 |
1 files changed, 0 insertions, 131 deletions
diff --git a/raw-wiki-dump/GitRepositories%2Fuser%2Fjs%2Fmkmif b/raw-wiki-dump/GitRepositories%2Fuser%2Fjs%2Fmkmif deleted file mode 100644 index b56bd3c..0000000 --- a/raw-wiki-dump/GitRepositories%2Fuser%2Fjs%2Fmkmif +++ /dev/null @@ -1,131 +0,0 @@ -{{{ -#!htmlcomment - -This page is maintained automatically by a script. Don't modify this page by hand, -your changes will just be overwritten the next time the script runs. Talk to your -Friendly Neighborhood Repository Maintainer if you need to change something here. - -}}} - -{{{ -#!html -<h1>Master Key Memory Interface</h1> - -<p>This core provides a 32-bit interface to a master key memory (MKM) -implemented using an external volatile memory. The memory targeted is -<a href="https://www.microchip.com/wwwproducts/en/23K640">Microchip 23K640</a>, a -serial SRAM with a SPI interface.</p> - -<h2>Purpose and Functionality</h2> - -<p>The Master Key Memory is where a cryptographic master key is stored. the -key is used (for example) to cryptographically wrap other keys and -secrets. By wiping the MKM and thus the master key, the wrapped secrets -are protected against leakage to a local attacker that physically breaks -an active tamper detect shield.</p> - -<p>The core will in future versions provide functionality to autonomously -protect against memory remanence effects by rotating bits in stored data -and moving data to different addresses in the external memory. The core -will also be able to autonomously zeroise the memory when given an alarm -signal.</p> - -<p>The current version however simply provides an interface to the slower, -serial memory including initializing the memory in the correct mode. The -core supports three commands: read word, write word and initialize -memory.</p> - -<h2>Limitations</h2> - -<p>The SPI clock is generated by the core clock (clk) divided by the -SPI clock divisor * 2 (the divisor is the half period in cycles). The -default divisor is set to generate an SPI clock of less than 1 MHz when -the core clock is 50 MHz. For other speeds and other -core frequencies the divisor will have to be adjusted.</p> - -<p>The core will only read and write complete 32-bit words.</p> - -<p>Commands given while the core is performing a read, write or -initialization operation will silently be ignored.</p> - -<h2>Implementation</h2> - -<p>The implementation is divided into three parts:</p> - -<ul> -<li><p>A SPI interface able to transmit a given number of bits at a given SPI -clock rate. Data received are simultaneously collected and provided as -read data. The SPI interface also generates the SPI clock and chip -enable.</p></li> -<li><p>A command handler core that read and write words as well as send -init commands to the memory using the SPI interface.</p></li> -<li><p>An API interface that provides the ability to configure the SPI clock -speed, setting the address to be read or written and data access.</p></li> -</ul> - -<p>The current implementation will initiate the Microchip memory directly -after reset and set the memory in sequential mode. This means that it -would actually be possible to write a stream of data to the memory, but -since the API only handles a single 32-bit word, the mode is only used -to remove the need to update the address between bytes.</p> - -<h3>Implementation Results</h3> - -<p><strong>Altera Cyclone IV E</strong></p> - -<ul> -<li>Registers: 212</li> -<li>Logic Elements: 289</li> -<li>Fmax: 250 MHz</li> -</ul> - -<p><strong>Altera Cyclone V</strong></p> - -<ul> -<li>Registers: 221</li> -<li>ALMs: 113</li> -<li>Fmax: 194 MHz</li> -</ul> - -<p><strong>Xilinx Spartan 6</strong></p> - -<ul> -<li>Slice Registers: 206</li> -<li>Slice LUTs: 185</li> -<li>Fmax: 200 MHz</li> -</ul> - -<p><strong>Xilinx Artix 7</strong></p> - -<ul> -<li>Slice Registers: 205</li> -<li>Slice LUTs: 176</li> -<li>Fmax: 383 MHz</li> -</ul> - -<h2>Status</h2> - -<p><strong>(2016-05-10)</strong></p> - -<p>The core has now been verified in a Xilinx Spartan-6 FPGA and the target -Microchip memory connected to the FPGA.memory. Read and write access has -successfully been performed with SPI clock speeds from 300 Hz to 10 MHz.</p> - -<p><strong>(2016-05-02)</strong></p> - -<p>Functional development completed. Simulation based debugging -completed. Built design for both Altera and Xilinx FPGAs.</p> - -<p><strong>(2016-04-25)</strong></p> - -<p>Refactored core into top_-, core- and spi-modules. Made the design much -simpler. First implementation almost completed.</p> - -<p><strong>(2016-04-21)</strong></p> - -<p>Core implementation started.</p> -}}} - -[[RepositoryIndex(format=table,glob=user/js/mkmif)]] - -|| Clone `https://git.cryptech.is/user/js/mkmif.git` || |