diff options
Diffstat (limited to 'raw-wiki-dump/GitRepositories%2Fhardware.md')
-rw-r--r-- | raw-wiki-dump/GitRepositories%2Fhardware.md | 51 |
1 files changed, 0 insertions, 51 deletions
diff --git a/raw-wiki-dump/GitRepositories%2Fhardware.md b/raw-wiki-dump/GitRepositories%2Fhardware.md deleted file mode 100644 index 4fcafa8..0000000 --- a/raw-wiki-dump/GitRepositories%2Fhardware.md +++ /dev/null @@ -1,51 +0,0 @@ -``` -#!htmlcomment - -This page is maintained automatically by a script. Don't modify this page by hand, -your changes will just be overwritten the next time the script runs. Talk to your -Friendly Neighborhood Repository Maintainer if you need to change something here. - -``` - -``` -#!html -<h1>STM32 firmware for Cryptech Alpha board</h1> - -<p>The Alpha board is our first full prototype for an open-source hardware -security module (HSM). It is a custom board with an STM32 Cortex-M4 -microcontroller and an Artix-7 FPGA, flash-based keystore, separate memory -for the Key Encryption Key, etc. See the wiki for design documents.</p> - -<h1>Copyrights</h1> - -<p>The license for all work done on this in the CrypTech project is a -3-clause BSD license.</p> - -<p>The "Noise generator" and "Amplifier" parts of the circuit diagram are -copied from Benedikt Stockebrand's ARRGH project. </p> - -<p>Both copyright statements are included in LICENSE.txt.</p> - -<h1>Board Revisions</h1> - -<ol> -<li><p><code>rev01</code> was the "dev-bridge" board, a daughterboard for the Novena, -which talked to the Novena's FPGA through the high-speed expansion -connector.</p></li> -<li><p><code>rev02</code> is the Alpha board, our first full prototype for an open-source -hardware security module (HSM). It is a custom board with an STM32 -Cortex-M4 microcontroller and an Artix-7 FPGA, flash-based keystore, -separate memory for the Key Encryption Key, etc.</p> - -<p>The board's form factor (4 x 4 in, 101.6 x 101.6 mm) was based on the -Intel NUC mini-PC, but there were some issues sourcing enough cases, so -only a few of these boards were made.</p></li> -<li><p><code>rev03</code> is functionally the same as <code>rev02</code>, but in a Eurocard form -factor (100 x 120 mm, aka "3Ux120").</p></li> -</ol> -``` - -[[RepositoryIndex(format=table,glob=hardware)]] - -| Clone `https://git.cryptech.is/hardware.git` | -|---| |