diff options
author | Rob Austein <sra@hactrn.net> | 2020-09-13 23:10:21 +0000 |
---|---|---|
committer | Rob Austein <sra@hactrn.net> | 2020-09-13 23:10:21 +0000 |
commit | 3aa8b1dd6e0f504ef83da99f8c9cdb2532f948f5 (patch) | |
tree | ca300cbdbc9b1ca3224441e50375d94c092223e8 /raw-wiki-dump/GitRepositories%2Fhardware.md | |
parent | 4ba5e00d5cdd42087a76e379cc39604b2da89ea4 (diff) |
Initial conversion pass
Diffstat (limited to 'raw-wiki-dump/GitRepositories%2Fhardware.md')
-rw-r--r-- | raw-wiki-dump/GitRepositories%2Fhardware.md | 51 |
1 files changed, 51 insertions, 0 deletions
diff --git a/raw-wiki-dump/GitRepositories%2Fhardware.md b/raw-wiki-dump/GitRepositories%2Fhardware.md new file mode 100644 index 0000000..4fcafa8 --- /dev/null +++ b/raw-wiki-dump/GitRepositories%2Fhardware.md @@ -0,0 +1,51 @@ +``` +#!htmlcomment + +This page is maintained automatically by a script. Don't modify this page by hand, +your changes will just be overwritten the next time the script runs. Talk to your +Friendly Neighborhood Repository Maintainer if you need to change something here. + +``` + +``` +#!html +<h1>STM32 firmware for Cryptech Alpha board</h1> + +<p>The Alpha board is our first full prototype for an open-source hardware +security module (HSM). It is a custom board with an STM32 Cortex-M4 +microcontroller and an Artix-7 FPGA, flash-based keystore, separate memory +for the Key Encryption Key, etc. See the wiki for design documents.</p> + +<h1>Copyrights</h1> + +<p>The license for all work done on this in the CrypTech project is a +3-clause BSD license.</p> + +<p>The "Noise generator" and "Amplifier" parts of the circuit diagram are +copied from Benedikt Stockebrand's ARRGH project. </p> + +<p>Both copyright statements are included in LICENSE.txt.</p> + +<h1>Board Revisions</h1> + +<ol> +<li><p><code>rev01</code> was the "dev-bridge" board, a daughterboard for the Novena, +which talked to the Novena's FPGA through the high-speed expansion +connector.</p></li> +<li><p><code>rev02</code> is the Alpha board, our first full prototype for an open-source +hardware security module (HSM). It is a custom board with an STM32 +Cortex-M4 microcontroller and an Artix-7 FPGA, flash-based keystore, +separate memory for the Key Encryption Key, etc.</p> + +<p>The board's form factor (4 x 4 in, 101.6 x 101.6 mm) was based on the +Intel NUC mini-PC, but there were some issues sourcing enough cases, so +only a few of these boards were made.</p></li> +<li><p><code>rev03</code> is functionally the same as <code>rev02</code>, but in a Eurocard form +factor (100 x 120 mm, aka "3Ux120").</p></li> +</ol> +``` + +[[RepositoryIndex(format=table,glob=hardware)]] + +| Clone `https://git.cryptech.is/hardware.git` | +|---| |