path: root/rtl/modexpng_sdp_36k_x32_x16_wrapper_xilinx.v

//======================================================================
//
// Copyright (c) 2019, NORDUnet A/S All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
// - Redistributions of source code must retain the above copyright
//   notice, this list of conditions and the following disclaimer.
//
// - Redistributions in binary form must reproduce the above copyright
//   notice, this list of conditions and the following disclaimer in the
//   documentation and/or other materials provided with the distribution.
//
// - Neither the name of the NORDUnet nor the names of its contributors may
//   be used to endorse or promote products derived from this software
//   without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
//======================================================================

module modexpng_sdp_36k_x32_x16_wrapper_xilinx
(
    clk, clk_bus,
    
    ena, wea,
    addra, dina,
    
    enb,
    addrb, doutb
);


    //
    // Headers
    //
    `include "modexpng_parameters.vh"


    //
    // Ports
    //
    input                                     clk;
    input                                     clk_bus;
    
    input                                     ena;
    input                                     wea;
    input  [BANK_ADDR_W + OP_ADDR_W     -1:0] addra;
    input  [              WORD_W        -1:0] dina;
    
    input                                     enb;
    input  [BANK_ADDR_W + BUS_OP_ADDR_W -1:0] addrb;
    output [              BUS_DATA_W    -1:0] doutb;

    
    //
    // BRAM_SDP_MACRO
    //
    BRAM_SDP_MACRO #
    (
        .DEVICE                 ("7SERIES"),
        
        .BRAM_SIZE              ("36Kb"),
        
        .WRITE_WIDTH            (WORD_W),
        .READ_WIDTH             (BUS_DATA_W),
        
        .DO_REG                 (0),
        .WRITE_MODE             ("READ_FIRST"),
        
        .SRVAL                  (72'h000000000000000000),
        .INIT                   (72'h000000000000000000),

        .INIT_FILE              ("NONE"),
        .SIM_COLLISION_CHECK    ("NONE")
    )
    BRAM_SDP_MACRO_inst
    (
        .RST        (1'b0),
    
        .WRCLK      (clk),
        .WREN       (ena),
        .WE         ({2{wea}}),
        .WRADDR     (addra),
        .DI         (dina),
        
        .RDCLK      (clk_bus),
        .RDEN       (enb),
        .REGCE      (1'b0),
        .RDADDR     (addrb),
        .DO         (doutb)
    );
    
endmodule