aboutsummaryrefslogblamecommitdiff
path: root/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_smartcard.c
blob: 3f794ef7d105c289bf79faeb6197ca7cc0a201b1 (plain) (tree)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303






















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































                                                                                                                                             
/**
  ******************************************************************************
  * @file    stm32f4xx_hal_smartcard.c
  * @author  MCD Application Team
  * @version V1.3.2
  * @date    26-June-2015
  * @brief   SMARTCARD HAL module driver.
  *          This file provides firmware functions to manage the following 
  *          functionalities of the SMARTCARD peripheral:
  *           + Initialization and de-initialization functions
  *           + IO operation functions
  *           + Peripheral State and Errors functions 
  *           
  @verbatim       
  ==============================================================================
                     ##### How to use this driver #####
  ==============================================================================
    [..]
      The SMARTCARD HAL driver can be used as follows:
    
    (#) Declare a SMARTCARD_HandleTypeDef handle structure.
    (#) Initialize the SMARTCARD low level resources by implementing the HAL_SMARTCARD_MspInit() API:
        (##) Enable the USARTx interface clock.
        (##) SMARTCARD pins configuration:
            (+++) Enable the clock for the SMARTCARD GPIOs.
            (+++) Configure these SMARTCARD pins as alternate function pull-up.
        (##) NVIC configuration if you need to use interrupt process (HAL_SMARTCARD_Transmit_IT()
             and HAL_SMARTCARD_Receive_IT() APIs):
            (+++) Configure the USARTx interrupt priority.
            (+++) Enable the NVIC USART IRQ handle.
        (##) DMA Configuration if you need to use DMA process (HAL_SMARTCARD_Transmit_DMA()
             and HAL_SMARTCARD_Receive_DMA() APIs):
            (+++) Declare a DMA handle structure for the Tx/Rx stream.
            (+++) Enable the DMAx interface clock.
            (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.                
            (+++) Configure the DMA Tx/Rx Stream.
            (+++) Associate the initialized DMA handle to the SMARTCARD DMA Tx/Rx handle.
            (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx Stream.

    (#) Program the Baud Rate, Word Length , Stop Bit, Parity, Hardware 
        flow control and Mode(Receiver/Transmitter) in the SMARTCARD Init structure.

    (#) Initialize the SMARTCARD registers by calling the HAL_SMARTCARD_Init() API:
        (++) These APIs configure also the low level Hardware GPIO, CLOCK, CORTEX...etc)
             by calling the customized HAL_SMARTCARD_MspInit() API.
    [..]  
    (@) The specific SMARTCARD interrupts (Transmission complete interrupt, 
        RXNE interrupt and Error Interrupts) will be managed using the macros
        __HAL_SMARTCARD_ENABLE_IT() and __HAL_SMARTCARD_DISABLE_IT() inside the transmit and receive process.
                   
    [..]   
    Three operation modes are available within this driver :     
  
    *** Polling mode IO operation ***
    =================================
    [..]    
      (+) Send an amount of data in blocking mode using HAL_SMARTCARD_Transmit() 
      (+) Receive an amount of data in blocking mode using HAL_SMARTCARD_Receive()
       
    *** Interrupt mode IO operation ***    
    ===================================
    [..]    
      (+) Send an amount of data in non blocking mode using HAL_SMARTCARD_Transmit_IT() 
      (+) At transmission end of transfer HAL_SMARTCARD_TxCpltCallback is executed and user can 
          add his own code by customization of function pointer HAL_SMARTCARD_TxCpltCallback
      (+) Receive an amount of data in non blocking mode using HAL_SMARTCARD_Receive_IT() 
      (+) At reception end of transfer HAL_SMARTCARD_RxCpltCallback is executed and user can 
          add his own code by customization of function pointer HAL_SMARTCARD_RxCpltCallback
      (+) In case of transfer Error, HAL_SMARTCARD_ErrorCallback() function is executed and user can 
          add his own code by customization of function pointer HAL_SMARTCARD_ErrorCallback

    *** DMA mode IO operation ***    
    ==============================
    [..] 
      (+) Send an amount of data in non blocking mode (DMA) using HAL_SMARTCARD_Transmit_DMA() 
      (+) At transmission end of transfer HAL_SMARTCARD_TxCpltCallback is executed and user can 
          add his own code by customization of function pointer HAL_SMARTCARD_TxCpltCallback
      (+) Receive an amount of data in non blocking mode (DMA) using HAL_SMARTCARD_Receive_DMA() 
      (+) At reception end of transfer HAL_SMARTCARD_RxCpltCallback is executed and user can 
          add his own code by customization of function pointer HAL_SMARTCARD_RxCpltCallback
      (+) In case of transfer Error, HAL_SMARTCARD_ErrorCallback() function is executed and user can 
          add his own code by customization of function pointer HAL_SMARTCARD_ErrorCallback    

    *** SMARTCARD HAL driver macros list ***
    ============================================= 
    [..]
      Below the list of most used macros in SMARTCARD HAL driver.
       
      (+) __HAL_SMARTCARD_ENABLE: Enable the SMARTCARD peripheral 
      (+) __HAL_SMARTCARD_DISABLE: Disable the SMARTCARD peripheral     
      (+) __HAL_SMARTCARD_GET_FLAG : Check whether the specified SMARTCARD flag is set or not
      (+) __HAL_SMARTCARD_CLEAR_FLAG : Clear the specified SMARTCARD pending flag
      (+) __HAL_SMARTCARD_ENABLE_IT: Enable the specified SMARTCARD interrupt
      (+) __HAL_SMARTCARD_DISABLE_IT: Disable the specified SMARTCARD interrupt
    
    [..]  
      (@) You can refer to the SMARTCARD HAL driver header file for more useful macros
          
  @endverbatim
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *   1. Redistributions of source code must retain the above copyright notice,
  *      this list of conditions and the following disclaimer.
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *   3. Neither the name of STMicroelectronics nor the names of its contributors
  *      may be used to endorse or promote products derived from this software
  *      without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
  */ 

/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"

/** @addtogroup STM32F4xx_HAL_Driver
  * @{
  */

/** @defgroup SMARTCARD SMARTCARD
  * @brief HAL USART SMARTCARD module driver
  * @{
  */
#ifdef HAL_SMARTCARD_MODULE_ENABLED
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/** @addtogroup SMARTCARD_Private_Constants
  * @{
  */
#define SMARTCARD_TIMEOUT_VALUE  22000
/**
  * @}
  */
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/** @addtogroup SMARTCARD_Private_Functions
  * @{
  */
static void SMARTCARD_SetConfig (SMARTCARD_HandleTypeDef *hsc);
static HAL_StatusTypeDef SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc);
static HAL_StatusTypeDef SMARTCARD_EndTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard);
static HAL_StatusTypeDef SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc);
static void SMARTCARD_DMATransmitCplt(DMA_HandleTypeDef *hdma);
static void SMARTCARD_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
static void SMARTCARD_DMAError(DMA_HandleTypeDef *hdma);
static HAL_StatusTypeDef SMARTCARD_WaitOnFlagUntilTimeout(SMARTCARD_HandleTypeDef *hsc, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
/**
  * @}
  */
/* Exported functions --------------------------------------------------------*/
/** @defgroup SMARTCARD_Exported_Functions SMARTCARD Exported Functions
  * @{
  */

/** @defgroup SMARTCARD_Exported_Functions_Group1 SmartCard Initialization and de-initialization functions 
  *  @brief    Initialization and Configuration functions 
  *
@verbatim 
  ==============================================================================
              ##### Initialization and Configuration functions #####
  ==============================================================================
  [..]
  This subsection provides a set of functions allowing to initialize the USART 
  in Smartcard mode.
  [..]
  The Smartcard interface is designed to support asynchronous protocol Smartcards as
  defined in the ISO 7816-3 standard.
  [..]
  The USART can provide a clock to the smartcard through the SCLK output.
  In smartcard mode, SCLK is not associated to the communication but is simply derived 
  from the internal peripheral input clock through a 5-bit prescaler.
  [..]
  (+) For the Smartcard mode only these parameters can be configured:
      (++) Baud Rate
      (++) Word Length => Should be 9 bits (8 bits + parity)
      (++) Stop Bit
      (++) Parity: => Should be enabled 
   +-------------------------------------------------------------+
   |   M bit |  PCE bit  |        SMARTCARD frame                |
   |---------------------|---------------------------------------|
   |    1    |    1      |    | SB | 8 bit data | PB | STB |     |
   +-------------------------------------------------------------+
      (++) USART polarity
      (++) USART phase
      (++) USART LastBit
      (++) Receiver/transmitter modes
      (++) Prescaler
      (++) GuardTime
      (++) NACKState: The Smartcard NACK state

     (+) Recommended SmartCard interface configuration to get the Answer to Reset from the Card:
        (++) Word Length = 9 Bits
        (++) 1.5 Stop Bit
        (++) Even parity
        (++) BaudRate = 12096 baud
        (++) Tx and Rx enabled
  [..]
  Please refer to the ISO 7816-3 specification for more details.

    -@- It is also possible to choose 0.5 stop bit for receiving but it is recommended 
        to use 1.5 stop bits for both transmitting and receiving to avoid switching 
        between the two configurations.
  [..]
    The HAL_SMARTCARD_Init() function follows the USART  SmartCard configuration 
    procedure (details for the procedure are available in reference manual (RM0329)).

@endverbatim
  * @{
  */

/**
  * @brief Initializes the SmartCard mode according to the specified
  *         parameters in the SMARTCARD_InitTypeDef and create the associated handle .
  * @param  hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
  *                the configuration information for SMARTCARD module.
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsc)
{
  /* Check the SMARTCARD handle allocation */
  if(hsc == NULL)
  {
    return HAL_ERROR;
  }

  /* Check the parameters */
  assert_param(IS_SMARTCARD_INSTANCE(hsc->Instance));
  assert_param(IS_SMARTCARD_NACK_STATE(hsc->Init.NACKState));

  if(hsc->State == HAL_SMARTCARD_STATE_RESET)
  {  
    /* Allocate lock resource and initialize it */
    hsc->Lock = HAL_UNLOCKED;
    /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */
    HAL_SMARTCARD_MspInit(hsc);
  }
  
  hsc->State = HAL_SMARTCARD_STATE_BUSY;

  /* Set the Prescaler */
  MODIFY_REG(hsc->Instance->GTPR, USART_GTPR_PSC, hsc->Init.Prescaler);

  /* Set the Guard Time */
  MODIFY_REG(hsc->Instance->GTPR, USART_GTPR_GT, ((hsc->Init.GuardTime)<<8));

  /* Set the Smartcard Communication parameters */
  SMARTCARD_SetConfig(hsc);

  /* In SmartCard mode, the following bits must be kept cleared: 
  - LINEN bit in the USART_CR2 register
  - HDSEL and IREN bits in the USART_CR3 register.*/
  hsc->Instance->CR2 &= ~USART_CR2_LINEN;
  hsc->Instance->CR3 &= ~(USART_CR3_IREN | USART_CR3_HDSEL);

  /* Enable the SMARTCARD Parity Error Interrupt */
  __HAL_SMARTCARD_ENABLE_IT(hsc, SMARTCARD_IT_PE);

  /* Enable the SMARTCARD Framing Error Interrupt */
  __HAL_SMARTCARD_ENABLE_IT(hsc, SMARTCARD_IT_ERR);

  /* Enable the Peripheral */
  __HAL_SMARTCARD_ENABLE(hsc);

  /* Configure the Smartcard NACK state */
  MODIFY_REG(hsc->Instance->CR3, USART_CR3_NACK, hsc->Init.NACKState);

  /* Enable the SC mode by setting the SCEN bit in the CR3 register */
  hsc->Instance->CR3 |= (USART_CR3_SCEN);

  /* Initialize the SMARTCARD state*/
  hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
  hsc->State= HAL_SMARTCARD_STATE_READY;

  return HAL_OK;
}

/**
  * @brief DeInitializes the USART SmartCard peripheral 
  * @param  hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
  *                the configuration information for SMARTCARD module.
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsc)
{
  /* Check the SMARTCARD handle allocation */
  if(hsc == NULL)
  {
    return HAL_ERROR;
  }

  /* Check the parameters */
  assert_param(IS_SMARTCARD_INSTANCE(hsc->Instance));

  hsc->State = HAL_SMARTCARD_STATE_BUSY;

  /* Disable the Peripheral */
  __HAL_SMARTCARD_DISABLE(hsc);

  /* DeInit the low level hardware */
  HAL_SMARTCARD_MspDeInit(hsc);

  hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
  hsc->State = HAL_SMARTCARD_STATE_RESET;

  /* Release Lock */
  __HAL_UNLOCK(hsc);

  return HAL_OK;
}

/**
  * @brief SMARTCARD MSP Init
  * @param  hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
  *                the configuration information for SMARTCARD module.
  * @retval None
  */
 __weak void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsc)
{
  /* NOTE : This function Should not be modified, when the callback is needed,
            the HAL_SMARTCARD_MspInit could be implemented in the user file
   */
}

/**
  * @brief SMARTCARD MSP DeInit
  * @param  hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
  *                the configuration information for SMARTCARD module.
  * @retval None
  */
 __weak void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsc)
{
  /* NOTE : This function Should not be modified, when the callback is needed,
            the HAL_SMARTCARD_MspDeInit could be implemented in the user file
   */
}

/**
  * @}
  */

/** @defgroup SMARTCARD_Exported_Functions_Group2 IO operation functions 
  *  @brief   SMARTCARD Transmit and Receive functions 
  *
@verbatim   
 ===============================================================================
                      ##### IO operation functions #####
 ===============================================================================
    This subsection provides a set of functions allowing to manage the SMARTCARD data transfers.
    [..]
    Smartcard is a single wire half duplex communication protocol. 
    The Smartcard interface is designed to support asynchronous protocol Smartcards as
    defined in the ISO 7816-3 standard. The USART should be configured as:
    (+) 8 bits plus parity: where M=1 and PCE=1 in the USART_CR1 register
    (+) 1.5 stop bits when transmitting and receiving: where STOP=11 in the USART_CR2 register.

    (#) There are two modes of transfer:
       (++) Blocking mode: The communication is performed in polling mode. 
            The HAL status of all data processing is returned by the same function 
            after finishing transfer.  
       (++) Non Blocking mode: The communication is performed using Interrupts 
           or DMA, These APIs return the HAL status.
           The end of the data processing will be indicated through the 
           dedicated SMARTCARD IRQ when using Interrupt mode or the DMA IRQ when 
           using DMA mode.
           The HAL_SMARTCARD_TxCpltCallback(), HAL_SMARTCARD_RxCpltCallback() user callbacks 
           will be executed respectively at the end of the Transmit or Receive process
           The HAL_SMARTCARD_ErrorCallback() user callback will be executed when a communication error is detected

    (#) Blocking mode APIs are :
        (++) HAL_SMARTCARD_Transmit()
        (++) HAL_SMARTCARD_Receive() 

    (#) Non Blocking mode APIs with Interrupt are :
        (++) HAL_SMARTCARD_Transmit_IT()
        (++) HAL_SMARTCARD_Receive_IT()
        (++) HAL_SMARTCARD_IRQHandler()

    (#) Non Blocking mode functions with DMA are :
        (++) HAL_SMARTCARD_Transmit_DMA()
        (++) HAL_SMARTCARD_Receive_DMA()

    (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
        (++) HAL_SMARTCARD_TxCpltCallback()
        (++) HAL_SMARTCARD_RxCpltCallback()
        (++) HAL_SMARTCARD_ErrorCallback()

@endverbatim
  * @{
  */

/**
  * @brief Send an amount of data in blocking mode 
  * @param  hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
  *                the configuration information for SMARTCARD module.
  * @param pData: pointer to data buffer
  * @param Size: amount of data to be sent
  * @param Timeout: Timeout duration 
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout)
{
  uint16_t* tmp;
  uint32_t tmp1 = 0;
  
  tmp1 = hsc->State;
  if((tmp1 == HAL_SMARTCARD_STATE_READY) || (tmp1 == HAL_SMARTCARD_STATE_BUSY_RX))
  {
    if((pData == NULL) || (Size == 0)) 
    {
      return  HAL_ERROR;
    }

    /* Process Locked */
    __HAL_LOCK(hsc);

    hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
    /* Check if a non-blocking receive process is ongoing or not */
    if(hsc->State == HAL_SMARTCARD_STATE_BUSY_RX) 
    {
      hsc->State = HAL_SMARTCARD_STATE_BUSY_TX_RX;
    }
    else
    {
      hsc->State = HAL_SMARTCARD_STATE_BUSY_TX;
    }
    
    hsc->TxXferSize = Size;
    hsc->TxXferCount = Size;
    while(hsc->TxXferCount > 0)
    {
      hsc->TxXferCount--;      
      if(SMARTCARD_WaitOnFlagUntilTimeout(hsc, SMARTCARD_FLAG_TXE, RESET, Timeout) != HAL_OK)
      {
        return HAL_TIMEOUT;
      }
      tmp = (uint16_t*) pData;
      hsc->Instance->DR = (*tmp & (uint16_t)0x01FF);
      pData +=1;
    }
    
    if(SMARTCARD_WaitOnFlagUntilTimeout(hsc, SMARTCARD_FLAG_TC, RESET, Timeout) != HAL_OK)
    {
      return HAL_TIMEOUT;
    }

    /* Check if a non-blocking receive process is ongoing or not */
    if(hsc->State == HAL_SMARTCARD_STATE_BUSY_TX_RX) 
    {
      hsc->State = HAL_SMARTCARD_STATE_BUSY_RX;
    }
    else
    {
      hsc->State = HAL_SMARTCARD_STATE_READY;
    }
    /* Process Unlocked */
    __HAL_UNLOCK(hsc);

    return HAL_OK;
  }
  else
  {
    return HAL_BUSY;
  }
}

/**
  * @brief Receive an amount of data in blocking mode 
  * @param  hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
  *                the configuration information for SMARTCARD module.
  * @param pData: pointer to data buffer
  * @param Size: amount of data to be received
  * @param Timeout: Timeout duration   
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout)
{
  uint16_t* tmp;
  uint32_t tmp1 = 0;
  
  tmp1 = hsc->State;
  if((tmp1 == HAL_SMARTCARD_STATE_READY) || (tmp1 == HAL_SMARTCARD_STATE_BUSY_TX))
  {
    if((pData == NULL) || (Size == 0)) 
    {
      return  HAL_ERROR;
    }

    /* Process Locked */
    __HAL_LOCK(hsc);
    
    hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;

    /* Check if a non-blocking transmit process is ongoing or not */
    if(hsc->State == HAL_SMARTCARD_STATE_BUSY_TX) 
    {
      hsc->State = HAL_SMARTCARD_STATE_BUSY_TX_RX;
    }
    else
    {
      hsc->State = HAL_SMARTCARD_STATE_BUSY_RX;
    }

    hsc->RxXferSize = Size;
    hsc->RxXferCount = Size;

    /* Check the remain data to be received */
    while(hsc->RxXferCount > 0)
    {
      hsc->RxXferCount--;
      if(SMARTCARD_WaitOnFlagUntilTimeout(hsc, SMARTCARD_FLAG_RXNE, RESET, Timeout) != HAL_OK)
      {
        return HAL_TIMEOUT;
      }
      tmp = (uint16_t*) pData;
      *tmp = (uint16_t)(hsc->Instance->DR & (uint16_t)0x00FF);
      pData +=1;
    }

    /* Check if a non-blocking transmit process is ongoing or not */
    if(hsc->State == HAL_SMARTCARD_STATE_BUSY_TX_RX) 
    {
      hsc->State = HAL_SMARTCARD_STATE_BUSY_TX;
    }
    else
    {
      hsc->State = HAL_SMARTCARD_STATE_READY;
    }

    /* Process Unlocked */
    __HAL_UNLOCK(hsc);

    return HAL_OK;
  }
  else
  {
    return HAL_BUSY;
  }
}

/**
  * @brief Send an amount of data in non blocking mode 
  * @param  hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
  *                the configuration information for SMARTCARD module.
  * @param pData: pointer to data buffer
  * @param Size: amount of data to be sent
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size)
{
  uint32_t tmp1 = 0;
  
  tmp1 = hsc->State;
  if((tmp1 == HAL_SMARTCARD_STATE_READY) || (tmp1 == HAL_SMARTCARD_STATE_BUSY_RX))
  {
    if((pData == NULL) || (Size == 0)) 
    {
      return HAL_ERROR;
    }

    /* Process Locked */
    __HAL_LOCK(hsc);

    hsc->pTxBuffPtr = pData;
    hsc->TxXferSize = Size;
    hsc->TxXferCount = Size;

    hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
    /* Check if a non-blocking receive process is ongoing or not */
    if(hsc->State == HAL_SMARTCARD_STATE_BUSY_RX) 
    {
      hsc->State = HAL_SMARTCARD_STATE_BUSY_TX_RX;
    }
    else
    {
      hsc->State = HAL_SMARTCARD_STATE_BUSY_TX;
    }

    /* Process Unlocked */
    __HAL_UNLOCK(hsc);
    
    /* Enable the SMARTCARD Parity Error Interrupt */
    __HAL_SMARTCARD_ENABLE_IT(hsc, SMARTCARD_IT_PE);

    /* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
    __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_ERR);

    /* Enable the SMARTCARD Transmit data register empty Interrupt */
    __HAL_SMARTCARD_ENABLE_IT(hsc, SMARTCARD_IT_TXE);

    return HAL_OK;
  }
  else
  {
    return HAL_BUSY;
  }
}

/**
  * @brief Receive an amount of data in non blocking mode 
  * @param  hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
  *                the configuration information for SMARTCARD module.
  * @param pData: pointer to data buffer
  * @param Size: amount of data to be received
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size)
{
  uint32_t tmp1 = 0;
  
  tmp1 = hsc->State;
  if((tmp1 == HAL_SMARTCARD_STATE_READY) || (tmp1 == HAL_SMARTCARD_STATE_BUSY_TX))
  {
    if((pData == NULL) || (Size == 0)) 
    {
      return HAL_ERROR;
    }

    /* Process Locked */
    __HAL_LOCK(hsc);

    hsc->pRxBuffPtr = pData;
    hsc->RxXferSize = Size;
    hsc->RxXferCount = Size;

    hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
    /* Check if a non-blocking transmit process is ongoing or not */
    if(hsc->State == HAL_SMARTCARD_STATE_BUSY_TX) 
    {
      hsc->State = HAL_SMARTCARD_STATE_BUSY_TX_RX;
    }
    else
    {
      hsc->State = HAL_SMARTCARD_STATE_BUSY_RX;
    }
    /* Process Unlocked */
    __HAL_UNLOCK(hsc);
    
    /* Enable the SMARTCARD Data Register not empty Interrupt */
    __HAL_SMARTCARD_ENABLE_IT(hsc, SMARTCARD_IT_RXNE); 

    /* Enable the SMARTCARD Parity Error Interrupt */
    __HAL_SMARTCARD_ENABLE_IT(hsc, SMARTCARD_IT_PE);

    /* Enable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
    __HAL_SMARTCARD_ENABLE_IT(hsc, SMARTCARD_IT_ERR);

    return HAL_OK;
  }
  else
  {
    return HAL_BUSY;
  }
}

/**
  * @brief Send an amount of data in non blocking mode 
  * @param  hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
  *                the configuration information for SMARTCARD module.
  * @param pData: pointer to data buffer
  * @param Size: amount of data to be sent
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size)
{
  uint32_t *tmp;
  uint32_t tmp1 = 0;
  
  tmp1 = hsc->State;
  if((tmp1 == HAL_SMARTCARD_STATE_READY) || (tmp1 == HAL_SMARTCARD_STATE_BUSY_RX))
  {
    if((pData == NULL) || (Size == 0)) 
    {
      return HAL_ERROR;
    }

    /* Process Locked */
    __HAL_LOCK(hsc);

    hsc->pTxBuffPtr = pData;
    hsc->TxXferSize = Size;
    hsc->TxXferCount = Size;

    hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
    /* Check if a non-blocking receive process is ongoing or not */
    if(hsc->State == HAL_SMARTCARD_STATE_BUSY_RX) 
    {
      hsc->State = HAL_SMARTCARD_STATE_BUSY_TX_RX;
    }
    else
    {
      hsc->State = HAL_SMARTCARD_STATE_BUSY_TX;
    }

    /* Set the SMARTCARD DMA transfer complete callback */
    hsc->hdmatx->XferCpltCallback = SMARTCARD_DMATransmitCplt;

    /* Set the DMA error callback */
    hsc->hdmatx->XferErrorCallback = SMARTCARD_DMAError;

    /* Enable the SMARTCARD transmit DMA Stream */
    tmp = (uint32_t*)&pData;
    HAL_DMA_Start_IT(hsc->hdmatx, *(uint32_t*)tmp, (uint32_t)&hsc->Instance->DR, Size);

     /* Clear the TC flag in the SR register by writing 0 to it */
    __HAL_SMARTCARD_CLEAR_FLAG(hsc, SMARTCARD_FLAG_TC);
    
    /* Enable the DMA transfer for transmit request by setting the DMAT bit
    in the SMARTCARD CR3 register */
    hsc->Instance->CR3 |= USART_CR3_DMAT;

    /* Process Unlocked */
    __HAL_UNLOCK(hsc);

    return HAL_OK;
  }
  else
  {
    return HAL_BUSY;
  }
}

/**
  * @brief Receive an amount of data in non blocking mode 
  * @param  hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
  *                the configuration information for SMARTCARD module.
  * @param pData: pointer to data buffer
  * @param Size: amount of data to be received
  * @note   When the SMARTCARD parity is enabled (PCE = 1) the data received contain the parity bit.s
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size)
{
  uint32_t *tmp;
  uint32_t tmp1 = 0;
  
  tmp1 = hsc->State;
  if((tmp1 == HAL_SMARTCARD_STATE_READY) || (tmp1 == HAL_SMARTCARD_STATE_BUSY_TX))
  {
    if((pData == NULL) || (Size == 0)) 
    {
      return HAL_ERROR;
    }

    /* Process Locked */
    __HAL_LOCK(hsc);

    hsc->pRxBuffPtr = pData;
    hsc->RxXferSize = Size;

    hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
    /* Check if a non-blocking transmit process is ongoing or not */
    if(hsc->State == HAL_SMARTCARD_STATE_BUSY_TX) 
    {
      hsc->State = HAL_SMARTCARD_STATE_BUSY_TX_RX;
    }
    else
    {
      hsc->State = HAL_SMARTCARD_STATE_BUSY_RX;
    }

    /* Set the SMARTCARD DMA transfer complete callback */
    hsc->hdmarx->XferCpltCallback = SMARTCARD_DMAReceiveCplt;

    /* Set the DMA error callback */
    hsc->hdmarx->XferErrorCallback = SMARTCARD_DMAError;

    /* Enable the DMA Stream */
    tmp = (uint32_t*)&pData;
    HAL_DMA_Start_IT(hsc->hdmarx, (uint32_t)&hsc->Instance->DR, *(uint32_t*)tmp, Size);

    /* Enable the DMA transfer for the receiver request by setting the DMAR bit 
    in the SMARTCARD CR3 register */
    hsc->Instance->CR3 |= USART_CR3_DMAR;

    /* Process Unlocked */
    __HAL_UNLOCK(hsc);

    return HAL_OK;
  }
  else
  {
    return HAL_BUSY;
  }
}

/**
  * @brief This function handles SMARTCARD interrupt request.
  * @param  hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
  *                the configuration information for SMARTCARD module.
  * @retval None
  */
void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsc)
{
  uint32_t tmp1 = 0, tmp2 = 0; 
  
  tmp1 = hsc->Instance->SR;  
  tmp2 = __HAL_SMARTCARD_GET_IT_SOURCE(hsc, SMARTCARD_IT_PE);

  /* SMARTCARD parity error interrupt occurred --------------------------------*/
  if(((tmp1 & SMARTCARD_FLAG_PE) != RESET) && (tmp2 != RESET))
  { 
    __HAL_SMARTCARD_CLEAR_PEFLAG(hsc);
    hsc->ErrorCode |= HAL_SMARTCARD_ERROR_PE;
  }
  
  tmp2 = __HAL_SMARTCARD_GET_IT_SOURCE(hsc, SMARTCARD_IT_ERR);
  /* SMARTCARD frame error interrupt occurred ---------------------------------*/
  if(((tmp1 & SMARTCARD_FLAG_FE) != RESET) && (tmp2 != RESET))
  { 
    __HAL_SMARTCARD_CLEAR_FEFLAG(hsc);
    hsc->ErrorCode |= HAL_SMARTCARD_ERROR_FE;
  }
  
  tmp2 = __HAL_SMARTCARD_GET_IT_SOURCE(hsc, SMARTCARD_IT_ERR);
  /* SMARTCARD noise error interrupt occurred ---------------------------------*/
  if(((tmp1 & SMARTCARD_FLAG_NE) != RESET) && (tmp2 != RESET))
  { 
    __HAL_SMARTCARD_CLEAR_NEFLAG(hsc);
    hsc->ErrorCode |= HAL_SMARTCARD_ERROR_NE;
  }

  tmp2 = __HAL_SMARTCARD_GET_IT_SOURCE(hsc, SMARTCARD_IT_ERR);
  /* SMARTCARD Over-Run interrupt occurred ------------------------------------*/
  if(((tmp1 & SMARTCARD_FLAG_ORE) != RESET) && (tmp2 != RESET))
  { 
    __HAL_SMARTCARD_CLEAR_OREFLAG(hsc);
    hsc->ErrorCode |= HAL_SMARTCARD_ERROR_ORE;
  }
  
  tmp2 = __HAL_SMARTCARD_GET_IT_SOURCE(hsc, SMARTCARD_IT_RXNE);
  /* SMARTCARD in mode Receiver ----------------------------------------------*/
  if(((tmp1 & SMARTCARD_FLAG_RXNE) != RESET) && (tmp2 != RESET))
  { 
    SMARTCARD_Receive_IT(hsc);
  }

  tmp2 = __HAL_SMARTCARD_GET_IT_SOURCE(hsc, SMARTCARD_IT_TXE);
  /* SMARTCARD in mode Transmitter -------------------------------------------*/
  if(((tmp1 & SMARTCARD_FLAG_TXE) != RESET) && (tmp2 != RESET))
  {
    SMARTCARD_Transmit_IT(hsc);
  }

  tmp2 = __HAL_SMARTCARD_GET_IT_SOURCE(hsc, SMARTCARD_IT_TC);
  /* SMARTCARD in mode Transmitter (transmission end) ------------------------*/
  if(((tmp1 & SMARTCARD_FLAG_TC) != RESET) && (tmp2 != RESET))
  {
    SMARTCARD_EndTransmit_IT(hsc);
  }
  
  /* Call the Error call Back in case of Errors */
  if(hsc->ErrorCode != HAL_SMARTCARD_ERROR_NONE)
  {
    /* Set the SMARTCARD state ready to be able to start again the process */
    hsc->State= HAL_SMARTCARD_STATE_READY;
    HAL_SMARTCARD_ErrorCallback(hsc);
  }
}

/**
  * @brief Tx Transfer completed callbacks
  * @param  hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
  *                the configuration information for SMARTCARD module.
  * @retval None
  */
 __weak void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsc)
{
  /* NOTE : This function Should not be modified, when the callback is needed,
            the HAL_SMARTCARD_TxCpltCallback could be implemented in the user file
   */ 
}

/**
  * @brief Rx Transfer completed callbacks
  * @param  hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
  *                the configuration information for SMARTCARD module.
  * @retval None
  */
__weak void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsc)
{
  /* NOTE : This function Should not be modified, when the callback is needed,
            the HAL_SMARTCARD_TxCpltCallback could be implemented in the user file
   */
}

/**
  * @brief SMARTCARD error callbacks
  * @param  hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
  *                the configuration information for SMARTCARD module.
  * @retval None
  */
 __weak void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsc)
{
  /* NOTE : This function Should not be modified, when the callback is needed,
            the HAL_SMARTCARD_ErrorCallback could be implemented in the user file
   */ 
}

/**
  * @}
  */

/** @defgroup SMARTCARD_Exported_Functions_Group3 Peripheral State and Errors functions 
  *  @brief   SMARTCARD State and Errors functions 
  *
@verbatim   
 ===============================================================================
                ##### Peripheral State and Errors functions #####
 ===============================================================================  
    [..]
    This subsection provides a set of functions allowing to control the SmartCard.
     (+) HAL_SMARTCARD_GetState() API can be helpful to check in run-time the state of the SmartCard peripheral.
     (+) HAL_SMARTCARD_GetError() check in run-time errors that could be occurred during communication. 
@endverbatim
  * @{
  */

/**
  * @brief return the SMARTCARD state
  * @param  hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
  *                the configuration information for SMARTCARD module.
  * @retval HAL state
  */
HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsc)
{
  return hsc->State;
}

/**
  * @brief  Return the SMARTCARD error code
  * @param  hsc : pointer to a SMARTCARD_HandleTypeDef structure that contains
  *              the configuration information for the specified SMARTCARD.
  * @retval SMARTCARD Error Code
  */
uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsc)
{
  return hsc->ErrorCode;
}

/**
  * @}
  */

/**
  * @brief DMA SMARTCARD transmit process complete callback 
  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
  *                the configuration information for the specified DMA module.
  * @retval None
  */
static void SMARTCARD_DMATransmitCplt(DMA_HandleTypeDef *hdma)
{
  SMARTCARD_HandleTypeDef* hsc = ( SMARTCARD_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
  
  hsc->TxXferCount = 0;
  
  /* Disable the DMA transfer for transmit request by setting the DMAT bit
  in the USART CR3 register */
  hsc->Instance->CR3 &= (uint32_t)~((uint32_t)USART_CR3_DMAT);

  /* Enable the SMARTCARD Transmit Complete Interrupt */    
  __HAL_SMARTCARD_ENABLE_IT(hsc, SMARTCARD_IT_TC);
}

/**
  * @brief DMA SMARTCARD receive process complete callback 
  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
  *                the configuration information for the specified DMA module.
  * @retval None
  */
static void SMARTCARD_DMAReceiveCplt(DMA_HandleTypeDef *hdma)   
{
  SMARTCARD_HandleTypeDef* hsc = ( SMARTCARD_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;

  hsc->RxXferCount = 0;
  
  /* Disable the DMA transfer for the receiver request by setting the DMAR bit 
  in the USART CR3 register */
  hsc->Instance->CR3 &= (uint32_t)~((uint32_t)USART_CR3_DMAR);
  
  /* Check if a non-blocking transmit process is ongoing or not */
  if(hsc->State == HAL_SMARTCARD_STATE_BUSY_TX_RX) 
  {
    hsc->State = HAL_SMARTCARD_STATE_BUSY_TX;
  }
  else
  {
    hsc->State = HAL_SMARTCARD_STATE_READY;
  }
  
  HAL_SMARTCARD_RxCpltCallback(hsc);
}

/**
  * @brief DMA SMARTCARD communication error callback 
  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
  *                the configuration information for the specified DMA module.
  * @retval None
  */
static void SMARTCARD_DMAError(DMA_HandleTypeDef *hdma)   
{
  SMARTCARD_HandleTypeDef* hsc = ( SMARTCARD_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;

  hsc->RxXferCount = 0;
  hsc->TxXferCount = 0;
  hsc->ErrorCode = HAL_SMARTCARD_ERROR_DMA;
  hsc->State= HAL_SMARTCARD_STATE_READY;

  HAL_SMARTCARD_ErrorCallback(hsc);
}

/**
  * @brief  This function handles SMARTCARD Communication Timeout.
  * @param  hsc: SMARTCARD handle
  * @param  Flag: specifies the SMARTCARD flag to check.
  * @param  Status: The new Flag status (SET or RESET).
  * @param  Timeout: Timeout duration
  * @retval HAL status
  */
static HAL_StatusTypeDef SMARTCARD_WaitOnFlagUntilTimeout(SMARTCARD_HandleTypeDef *hsc, uint32_t Flag, FlagStatus Status, uint32_t Timeout)
{
  uint32_t tickstart = 0;

  /* Get tick */ 
  tickstart = HAL_GetTick();

  /* Wait until flag is set */
  if(Status == RESET)
  {    
    while(__HAL_SMARTCARD_GET_FLAG(hsc, Flag) == RESET)
    {
      /* Check for the Timeout */
      if(Timeout != HAL_MAX_DELAY)
      {
        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
        {
          /* Disable TXE and RXNE interrupts for the interrupt process */
          __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_TXE);
          __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_RXNE);
          
          hsc->State= HAL_SMARTCARD_STATE_READY;
          
          /* Process Unlocked */
          __HAL_UNLOCK(hsc);
          
          return HAL_TIMEOUT;
        }
      }
    }
  }
  else
  {
    while(__HAL_SMARTCARD_GET_FLAG(hsc, Flag) != RESET)
    {
      /* Check for the Timeout */
      if(Timeout != HAL_MAX_DELAY)
      {
        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
        {
          /* Disable TXE and RXNE interrupts for the interrupt process */
          __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_TXE);
          __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_RXNE);
          
          hsc->State= HAL_SMARTCARD_STATE_READY;
          
          /* Process Unlocked */
          __HAL_UNLOCK(hsc);
          
          return HAL_TIMEOUT;
        }
      }
    }
  }
  return HAL_OK;
}

/**
  * @brief Send an amount of data in non blocking mode 
  * @param  hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
  *                the configuration information for SMARTCARD module.
  * @retval HAL status
  */
static HAL_StatusTypeDef SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc)
{
  uint16_t* tmp;
  uint32_t tmp1 = 0;
  
  tmp1 = hsc->State;
  if((tmp1 == HAL_SMARTCARD_STATE_BUSY_TX) || (tmp1 == HAL_SMARTCARD_STATE_BUSY_TX_RX))
  {
    tmp = (uint16_t*) hsc->pTxBuffPtr;
    hsc->Instance->DR = (uint16_t)(*tmp & (uint16_t)0x01FF);
    hsc->pTxBuffPtr += 1;    
    
    if(--hsc->TxXferCount == 0)
    {
      /* Disable the SMARTCARD Transmit data register empty Interrupt */
      __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_TXE);
      
      /* Enable the SMARTCARD Transmit Complete Interrupt */    
      __HAL_SMARTCARD_ENABLE_IT(hsc, SMARTCARD_IT_TC);
    }
    
    return HAL_OK;
  }
  else
  {
    return HAL_BUSY;
  }
}

/**
  * @brief  Wraps up transmission in non blocking mode.
  * @param  hsmartcard: pointer to a SMARTCARD_HandleTypeDef structure that contains
  *                the configuration information for the specified SMARTCARD module.
  * @retval HAL status
  */
static HAL_StatusTypeDef SMARTCARD_EndTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard)
{
  /* Disable the SMARTCARD Transmit Complete Interrupt */    
  __HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_TC);
  
  /* Check if a receive process is ongoing or not */
  if(hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_TX_RX) 
  {
    hsmartcard->State = HAL_SMARTCARD_STATE_BUSY_RX;
  }
  else
  {
    /* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
    __HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_ERR);
    
    hsmartcard->State = HAL_SMARTCARD_STATE_READY;
  }
  
  HAL_SMARTCARD_TxCpltCallback(hsmartcard);
  
  return HAL_OK;
}

/**
  * @brief Receive an amount of data in non blocking mode 
  * @param  hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
  *                the configuration information for SMARTCARD module.
  * @retval HAL status
  */
static HAL_StatusTypeDef SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc)
{
  uint16_t* tmp;
  uint32_t tmp1 = 0;
  
  tmp1 = hsc->State;
  if((tmp1 == HAL_SMARTCARD_STATE_BUSY_RX) || (tmp1 == HAL_SMARTCARD_STATE_BUSY_TX_RX))
  {
    tmp = (uint16_t*) hsc->pRxBuffPtr;
    *tmp = (uint16_t)(hsc->Instance->DR & (uint16_t)0x00FF);
    hsc->pRxBuffPtr += 1;
    
    if(--hsc->RxXferCount == 0)
    {
      __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_RXNE);
      
      /* Disable the SMARTCARD Parity Error Interrupt */
      __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_PE);
      
      /* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
      __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_ERR);
      
      /* Check if a non-blocking transmit process is ongoing or not */
      if(hsc->State == HAL_SMARTCARD_STATE_BUSY_TX_RX) 
      {
        hsc->State = HAL_SMARTCARD_STATE_BUSY_TX;
      }
      else
      {
        hsc->State = HAL_SMARTCARD_STATE_READY;
      }
      
      HAL_SMARTCARD_RxCpltCallback(hsc);
      
      return HAL_OK;
    }
    return HAL_OK;
  }
  else
  {
    return HAL_BUSY; 
  }
}

/**
  * @brief Configure the SMARTCARD peripheral 
  * @param  hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
  *                the configuration information for SMARTCARD module.
  * @retval None
  */
static void SMARTCARD_SetConfig(SMARTCARD_HandleTypeDef *hsc)
{
  uint32_t tmpreg = 0x00;
  
  /* Check the parameters */
  assert_param(IS_SMARTCARD_INSTANCE(hsc->Instance));
  assert_param(IS_SMARTCARD_POLARITY(hsc->Init.CLKPolarity));
  assert_param(IS_SMARTCARD_PHASE(hsc->Init.CLKPhase));
  assert_param(IS_SMARTCARD_LASTBIT(hsc->Init.CLKLastBit));
  assert_param(IS_SMARTCARD_BAUDRATE(hsc->Init.BaudRate));  
  assert_param(IS_SMARTCARD_WORD_LENGTH(hsc->Init.WordLength));
  assert_param(IS_SMARTCARD_STOPBITS(hsc->Init.StopBits));
  assert_param(IS_SMARTCARD_PARITY(hsc->Init.Parity));
  assert_param(IS_SMARTCARD_MODE(hsc->Init.Mode));
  assert_param(IS_SMARTCARD_NACK_STATE(hsc->Init.NACKState));

  /* The LBCL, CPOL and CPHA bits have to be selected when both the transmitter and the
     receiver are disabled (TE=RE=0) to ensure that the clock pulses function correctly. */
  hsc->Instance->CR1 &= (uint32_t)~((uint32_t)(USART_CR1_TE | USART_CR1_RE));
  
  /*---------------------------- USART CR2 Configuration ---------------------*/
  tmpreg = hsc->Instance->CR2;
  /* Clear CLKEN, CPOL, CPHA and LBCL bits */
  tmpreg &= (uint32_t)~((uint32_t)(USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_CLKEN | USART_CR2_LBCL));
  /* Configure the SMARTCARD Clock, CPOL, CPHA and LastBit -----------------------*/
  /* Set CPOL bit according to hsc->Init.CLKPolarity value */
  /* Set CPHA bit according to hsc->Init.CLKPhase value */
  /* Set LBCL bit according to hsc->Init.CLKLastBit value */
  /* Set Stop Bits: Set STOP[13:12] bits according to hsc->Init.StopBits value */
  tmpreg |= (uint32_t)(USART_CR2_CLKEN | hsc->Init.CLKPolarity | 
                      hsc->Init.CLKPhase| hsc->Init.CLKLastBit | hsc->Init.StopBits);
  /* Write to USART CR2 */
  hsc->Instance->CR2 = (uint32_t)tmpreg;
  
  tmpreg = hsc->Instance->CR2;

  /* Clear STOP[13:12] bits */
  tmpreg &= (uint32_t)~((uint32_t)USART_CR2_STOP);

  /* Set Stop Bits: Set STOP[13:12] bits according to hsc->Init.StopBits value */
  tmpreg |= (uint32_t)(hsc->Init.StopBits);
  
  /* Write to USART CR2 */
  hsc->Instance->CR2 = (uint32_t)tmpreg;

  /*-------------------------- USART CR1 Configuration -----------------------*/
  tmpreg = hsc->Instance->CR1;

  /* Clear M, PCE, PS, TE and RE bits */
  tmpreg &= (uint32_t)~((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | \
                                   USART_CR1_RE));

  /* Configure the SMARTCARD Word Length, Parity and mode: 
     Set the M bits according to hsc->Init.WordLength value 
     Set PCE and PS bits according to hsc->Init.Parity value
     Set TE and RE bits according to hsc->Init.Mode value */
  tmpreg |= (uint32_t)hsc->Init.WordLength | hsc->Init.Parity | hsc->Init.Mode;

  /* Write to USART CR1 */
  hsc->Instance->CR1 = (uint32_t)tmpreg;

  /*-------------------------- USART CR3 Configuration -----------------------*/  
  /* Clear CTSE and RTSE bits */
  hsc->Instance->CR3 &= (uint32_t)~((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE));

  /*-------------------------- USART BRR Configuration -----------------------*/
  if((hsc->Instance == USART1) || (hsc->Instance == USART6))
  {
    hsc->Instance->BRR = SMARTCARD_BRR(HAL_RCC_GetPCLK2Freq(), hsc->Init.BaudRate);
  }
  else
  {
    hsc->Instance->BRR = SMARTCARD_BRR(HAL_RCC_GetPCLK1Freq(), hsc->Init.BaudRate);
  }
}

/**
  * @}
  */

#endif /* HAL_SMARTCARD_MODULE_ENABLED */
/**
  * @}
  */

/**
  * @}
  */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/