Turns out multi-part components were not fully converted and were not

recognized properly during forward annotation. Had to do a couple of
experiments to figure out how KiCAD handles this and then write some quick and
dirty scripts to repair the multi-part symbols (STM32, Artix-7 and the 74_244
logic buffer were affected).

1 files changed, 115 insertions, 95 deletions

diff --git a/KiCAD/rev02_18.sch-bak b/KiCAD/rev02_18.sch-bak
index 10c7020..ae4a82e 100644
--- a/KiCAD/rev02_18.sch-bak
+++ b/KiCAD/rev02_18.sch-bak
@@ -1,5 +1,5 @@
 EESchema Schematic File Version 4
-EELAYER 26 0
+EELAYER 30 0
 EELAYER END
 $Descr B 17000 11000
 encoding utf-8
@@ -19,7 +19,7 @@ Text Notes 7500 5100 0    60   ~ 12
 *) VCCAUX = 0.75V x (1 + 205 / 147) = 1.796V\n*) VCCO = 0.75V x (1 + 205 / 59) = 3.356\n*) Minimal load current is 2 mA:\n1.8V / 470 Ohm = ~~4mA\n3.3V /  470 Ohm = ~~7mA\n*) Light-load mode is enabled
 Text Notes 6700 8500 0    60   ~ 12
 This is the 3V3 rail that powers\nboth the FPGA and the ARM as well\nas various other components.
-Text Notes 8450 10220 0    66   ~ 12
+Text Notes 8450 10220 0    66   ~ 13
 FPGA voltage regulators
 Text Notes 1160 5190 0    60   ~ 12
 C113
@@ -74,10 +74,10 @@ C120
 Text Notes 5060 8890 0    60   ~ 12
 47uF
 $Comp
-L power:GND GND_109
+L power:GND #GND_0109
 U 1 1 58023F2B
 P 2800 6700
-F 0 "GND_109" H 2800 6700 20  0000 C CNN
+F 0 "#GND_0109" H 2800 6700 20  0000 C CNN
 F 1 "+GND" H 2800 6630 30  0000 C CNN
 F 2 "" H 2800 6700 70  0000 C CNN
 F 3 "" H 2800 6700 70  0000 C CNN
@@ -85,10 +85,10 @@ F 3 "" H 2800 6700 70  0000 C CNN
 	1    0    0    -1  
 $EndComp
 $Comp
-L power:GND GND_110
+L power:GND #GND_0110
 U 1 1 58023F2A
 P 3300 6700
-F 0 "GND_110" H 3300 6700 20  0000 C CNN
+F 0 "#GND_0110" H 3300 6700 20  0000 C CNN
 F 1 "+GND" H 3300 6630 30  0000 C CNN
 F 2 "" H 3300 6700 70  0000 C CNN
 F 3 "" H 3300 6700 70  0000 C CNN
@@ -96,10 +96,10 @@ F 3 "" H 3300 6700 70  0000 C CNN
 	1    0    0    -1  
 $EndComp
 $Comp
-L power:GND GND_111
+L power:GND #GND_0111
 U 1 1 58023F29
 P 2100 6700
-F 0 "GND_111" H 2100 6700 20  0000 C CNN
+F 0 "#GND_0111" H 2100 6700 20  0000 C CNN
 F 1 "+GND" H 2100 6630 30  0000 C CNN
 F 2 "" H 2100 6700 70  0000 C CNN
 F 3 "" H 2100 6700 70  0000 C CNN
@@ -107,10 +107,10 @@ F 3 "" H 2100 6700 70  0000 C CNN
 	1    0    0    -1  
 $EndComp
 $Comp
-L power:GND GND_112
+L power:GND #GND_0112
 U 1 1 58023F28
 P 1100 5600
-F 0 "GND_112" H 1100 5600 20  0000 C CNN
+F 0 "#GND_0112" H 1100 5600 20  0000 C CNN
 F 1 "+GND" H 1100 5530 30  0000 C CNN
 F 2 "" H 1100 5600 70  0000 C CNN
 F 3 "" H 1100 5600 70  0000 C CNN
@@ -118,10 +118,10 @@ F 3 "" H 1100 5600 70  0000 C CNN
 	1    0    0    -1  
 $EndComp
 $Comp
-L power:GND GND_113
+L power:GND #GND_0113
 U 1 1 58023F27
 P 1600 6700
-F 0 "GND_113" H 1600 6700 20  0000 C CNN
+F 0 "#GND_0113" H 1600 6700 20  0000 C CNN
 F 1 "+GND" H 1600 6630 30  0000 C CNN
 F 2 "" H 1600 6700 70  0000 C CNN
 F 3 "" H 1600 6700 70  0000 C CNN
@@ -129,10 +129,10 @@ F 3 "" H 1600 6700 70  0000 C CNN
 	1    0    0    -1  
 $EndComp
 $Comp
-L power:GND GND_114
+L power:GND #GND_0114
 U 1 1 58023F26
 P 4300 6000
-F 0 "GND_114" H 4300 6000 20  0000 C CNN
+F 0 "#GND_0114" H 4300 6000 20  0000 C CNN
 F 1 "+GND" H 4300 5930 30  0000 C CNN
 F 2 "" H 4300 6000 70  0000 C CNN
 F 3 "" H 4300 6000 70  0000 C CNN
@@ -140,10 +140,10 @@ F 3 "" H 4300 6000 70  0000 C CNN
 	1    0    0    -1  
 $EndComp
 $Comp
-L power:GND GND_115
+L power:GND #GND_0115
 U 1 1 58023F25
 P 5000 6000
-F 0 "GND_115" H 5000 6000 20  0000 C CNN
+F 0 "#GND_0115" H 5000 6000 20  0000 C CNN
 F 1 "+GND" H 5000 5930 30  0000 C CNN
 F 2 "" H 5000 6000 70  0000 C CNN
 F 3 "" H 5000 6000 70  0000 C CNN
@@ -151,10 +151,10 @@ F 3 "" H 5000 6000 70  0000 C CNN
 	1    0    0    -1  
 $EndComp
 $Comp
-L power:GND GND_116
+L power:GND #GND_0116
 U 1 1 58023F24
 P 5500 6000
-F 0 "GND_116" H 5500 6000 20  0000 C CNN
+F 0 "#GND_0116" H 5500 6000 20  0000 C CNN
 F 1 "+GND" H 5500 5930 30  0000 C CNN
 F 2 "" H 5500 6000 70  0000 C CNN
 F 3 "" H 5500 6000 70  0000 C CNN
@@ -162,10 +162,10 @@ F 3 "" H 5500 6000 70  0000 C CNN
 	1    0    0    -1  
 $EndComp
 $Comp
-L power:GND GND_117
+L power:GND #GND_0117
 U 1 1 58023F23
 P 2800 9900
-F 0 "GND_117" H 2800 9900 20  0000 C CNN
+F 0 "#GND_0117" H 2800 9900 20  0000 C CNN
 F 1 "+GND" H 2800 9830 30  0000 C CNN
 F 2 "" H 2800 9900 70  0000 C CNN
 F 3 "" H 2800 9900 70  0000 C CNN
@@ -173,10 +173,10 @@ F 3 "" H 2800 9900 70  0000 C CNN
 	1    0    0    -1  
 $EndComp
 $Comp
-L power:GND GND_118
+L power:GND #GND_0118
 U 1 1 58023F22
 P 3300 9900
-F 0 "GND_118" H 3300 9900 20  0000 C CNN
+F 0 "#GND_0118" H 3300 9900 20  0000 C CNN
 F 1 "+GND" H 3300 9830 30  0000 C CNN
 F 2 "" H 3300 9900 70  0000 C CNN
 F 3 "" H 3300 9900 70  0000 C CNN
@@ -184,10 +184,10 @@ F 3 "" H 3300 9900 70  0000 C CNN
 	1    0    0    -1  
 $EndComp
 $Comp
-L power:GND GND_119
+L power:GND #GND_0119
 U 1 1 58023F21
 P 2100 9900
-F 0 "GND_119" H 2100 9900 20  0000 C CNN
+F 0 "#GND_0119" H 2100 9900 20  0000 C CNN
 F 1 "+GND" H 2100 9830 30  0000 C CNN
 F 2 "" H 2100 9900 70  0000 C CNN
 F 3 "" H 2100 9900 70  0000 C CNN
@@ -195,10 +195,10 @@ F 3 "" H 2100 9900 70  0000 C CNN
 	1    0    0    -1  
 $EndComp
 $Comp
-L power:GND GND_120
+L power:GND #GND_0120
 U 1 1 58023F20
 P 1100 8800
-F 0 "GND_120" H 1100 8800 20  0000 C CNN
+F 0 "#GND_0120" H 1100 8800 20  0000 C CNN
 F 1 "+GND" H 1100 8730 30  0000 C CNN
 F 2 "" H 1100 8800 70  0000 C CNN
 F 3 "" H 1100 8800 70  0000 C CNN
@@ -206,10 +206,10 @@ F 3 "" H 1100 8800 70  0000 C CNN
 	1    0    0    -1  
 $EndComp
 $Comp
-L power:GND GND_121
+L power:GND #GND_0121
 U 1 1 58023F1F
 P 1600 9900
-F 0 "GND_121" H 1600 9900 20  0000 C CNN
+F 0 "#GND_0121" H 1600 9900 20  0000 C CNN
 F 1 "+GND" H 1600 9830 30  0000 C CNN
 F 2 "" H 1600 9900 70  0000 C CNN
 F 3 "" H 1600 9900 70  0000 C CNN
@@ -217,10 +217,10 @@ F 3 "" H 1600 9900 70  0000 C CNN
 	1    0    0    -1  
 $EndComp
 $Comp
-L power:GND GND_122
+L power:GND #GND_0122
 U 1 1 58023F1E
 P 4300 9200
-F 0 "GND_122" H 4300 9200 20  0000 C CNN
+F 0 "#GND_0122" H 4300 9200 20  0000 C CNN
 F 1 "+GND" H 4300 9130 30  0000 C CNN
 F 2 "" H 4300 9200 70  0000 C CNN
 F 3 "" H 4300 9200 70  0000 C CNN
@@ -228,10 +228,10 @@ F 3 "" H 4300 9200 70  0000 C CNN
 	1    0    0    -1  
 $EndComp
 $Comp
-L power:GND GND_123
+L power:GND #GND_0123
 U 1 1 58023F1D
 P 5000 9200
-F 0 "GND_123" H 5000 9200 20  0000 C CNN
+F 0 "#GND_0123" H 5000 9200 20  0000 C CNN
 F 1 "+GND" H 5000 9130 30  0000 C CNN
 F 2 "" H 5000 9200 70  0000 C CNN
 F 3 "" H 5000 9200 70  0000 C CNN
@@ -239,10 +239,10 @@ F 3 "" H 5000 9200 70  0000 C CNN
 	1    0    0    -1  
 $EndComp
 $Comp
-L power:GND GND_124
+L power:GND #GND_0124
 U 1 1 58023F1C
 P 5500 9200
-F 0 "GND_124" H 5500 9200 20  0000 C CNN
+F 0 "#GND_0124" H 5500 9200 20  0000 C CNN
 F 1 "+GND" H 5500 9130 30  0000 C CNN
 F 2 "" H 5500 9200 70  0000 C CNN
 F 3 "" H 5500 9200 70  0000 C CNN
@@ -250,10 +250,10 @@ F 3 "" H 5500 9200 70  0000 C CNN
 	1    0    0    -1  
 $EndComp
 $Comp
-L Cryptech_Alpha:VCC_5V0 VCC_5V0
+L Cryptech_Alpha:VCC_5V0 #VCC_5V00
 U 1 1 58023F1B
 P 1100 4600
-F 0 "VCC_5V0" H 1100 4600 20  0000 C CNN
+F 0 "#VCC_5V00" H 1100 4600 20  0000 C CNN
 F 1 "+VCC_5V0" H 1100 4530 30  0000 C CNN
 F 2 "" H 1100 4600 70  0000 C CNN
 F 3 "" H 1100 4600 70  0000 C CNN
@@ -261,10 +261,10 @@ F 3 "" H 1100 4600 70  0000 C CNN
 	1    0    0    -1  
 $EndComp
 $Comp
-L Cryptech_Alpha:VCC_5V0 VCC_5V0_2
+L Cryptech_Alpha:VCC_5V0 #VCC_5V0_02
 U 1 1 58023F1A
 P 1100 7800
-F 0 "VCC_5V0_2" H 1100 7800 20  0000 C CNN
+F 0 "#VCC_5V0_02" H 1100 7800 20  0000 C CNN
 F 1 "+VCC_5V0" H 1100 7730 30  0000 C CNN
 F 2 "" H 1100 7800 70  0000 C CNN
 F 3 "" H 1100 7800 70  0000 C CNN
@@ -305,11 +305,11 @@ Wire Wire Line
 	5500 9000 5500 9200
 Wire Wire Line
 	7000 4800 6000 4800
-Text Label 7000 4800 2 48 ~ 0
+Text Label 7000 4800 2    48   ~ 0
 FPGA_VCCAUX_1V8
 Wire Wire Line
 	7000 8000 6000 8000
-Text Label 7000 8000 0 48 ~ 0
+Text Label 7000 8000 0    48   ~ 0
 VCCO_3V3
 Wire Wire Line
 	2100 6200 2100 6300
@@ -357,7 +357,7 @@ Wire Wire Line
 	2300 5200 1900 5200
 Wire Wire Line
 	1900 4150 1900 5200
-Text GLabel 1900 4150 0 48 Input ~ 0
+Text GLabel 1900 4150 0    48   Input ~ 0
 PWR_ENA_VCCAUX
 Wire Wire Line
 	1600 5800 1600 6200
@@ -453,19 +453,19 @@ Wire Wire Line
 	1900 7500 1900 8400
 Wire Wire Line
 	1900 7500 1800 7500
-Text GLabel 1400 7500 0 48 Input ~ 0
+Text GLabel 1400 7500 0    48   Input ~ 0
 PWR_ENA_VCCO
 Wire Wire Line
 	4000 6200 3900 6200
 Wire Wire Line
 	4000 6200 4000 6500
-Text GLabel 4000 6500 2 48 Output ~ 0
+Text GLabel 4000 6500 2    48   Output ~ 0
 POK_VCCAUX
 Wire Wire Line
 	4000 9400 3900 9400
 Wire Wire Line
 	4000 9400 4000 9700
-Text GLabel 4000 9700 2 48 Output ~ 0
+Text GLabel 4000 9700 2    48   Output ~ 0
 POK_VCCO
 Text Notes 2700 4440 0    60   ~ 12
 U14
@@ -543,9 +543,11 @@ L Cryptech_Alpha:C-EUC1210 C113
 U 1 1 58023F19
 P 1100 5200
 F 0 "C113" H 1180 5010 60  0000 L BNN
-	1    1100 5200
-	1    0    0    -1
+F 1 "~" H 1100 5200 50  0001 C CNN
 F 2 "Cryptech_Alpha_Footprints:C_1210" H 1180 5010 60  0001 C CNN
+F 3 "" H 1100 5200 50  0001 C CNN
+	1    1100 5200
+	1    0    0    -1  
 $EndComp
 $Comp
 L Cryptech_Alpha:R-EU_R0402 R54
@@ -556,7 +558,7 @@ F 1 "4.7k" V 1490 8350 60  0000 R TNN
 F 2 "Cryptech_Alpha_Footprints:R_0402" H 1490 8350 60  0001 C CNN
 F 3 "" H 1490 8350 60  0000 C CNN
 	1    1600 8400
-	0    -1   -1   0
+	0    -1   -1   0   
 $EndComp
 $Comp
 L Cryptech_Alpha:R-EU_R0402 R58
@@ -567,7 +569,7 @@ F 1 "205k" V 4250 8560 60  0000 R TNN
 F 2 "Cryptech_Alpha_Footprints:R_0402" H 4250 8560 60  0001 C CNN
 F 3 "" H 4250 8560 60  0000 C CNN
 	1    4300 8300
-	0    -1   -1   0
+	0    -1   -1   0   
 $EndComp
 $Comp
 L Cryptech_Alpha:R-EU_R0402 R59
@@ -578,7 +580,7 @@ F 1 "59k" V 4240 9130 60  0000 R TNN
 F 2 "Cryptech_Alpha_Footprints:R_0402" H 4240 9130 60  0001 C CNN
 F 3 "" H 4240 9130 60  0000 C CNN
 	1    4300 8900
-	0    -1   -1   0
+	0    -1   -1   0   
 $EndComp
 $Comp
 L Cryptech_Alpha:R-EU_R0402 R61
@@ -589,7 +591,7 @@ F 1 "470" V 5520 8700 60  0000 R TNN
 F 2 "Cryptech_Alpha_Footprints:R_0402" H 5520 8700 60  0001 C CNN
 F 3 "" H 5520 8700 60  0000 C CNN
 	1    5500 8800
-	0    -1   -1   0
+	0    -1   -1   0   
 $EndComp
 $Comp
 L Cryptech_Alpha:BLM31PG330SN1_1206 FB6
@@ -600,52 +602,62 @@ F 1 "BLM31PG330SN1" H 5630 8010 60  0000 L BNN
 F 2 "Cryptech_Alpha_Footprints:L_1206" H 5630 8010 60  0001 C CNN
 F 3 "" H 5630 8010 60  0000 C CNN
 	1    5800 8100
-	1    0    0    -1
+	1    0    0    -1  
 $EndComp
 $Comp
 L Cryptech_Alpha:C-EUC0402 C115
 U 1 1 58023F13
 P 2100 6400
 F 0 "C115" H 2180 6210 60  0000 L BNN
-	1    2100 6400
-	1    0    0    -1
+F 1 "~" H 2100 6400 50  0001 C CNN
 F 2 "Cryptech_Alpha_Footprints:C_0402" H 2180 6210 60  0001 C CNN
+F 3 "" H 2100 6400 50  0001 C CNN
+	1    2100 6400
+	1    0    0    -1  
 $EndComp
 $Comp
 L Cryptech_Alpha:C-EUC0402 C116
 U 1 1 58023F12
 P 2100 9600
 F 0 "C116" H 2180 9410 60  0000 L BNN
-	1    2100 9600
-	1    0    0    -1
+F 1 "~" H 2100 9600 50  0001 C CNN
 F 2 "Cryptech_Alpha_Footprints:C_0402" H 2180 9410 60  0001 C CNN
+F 3 "" H 2100 9600 50  0001 C CNN
+	1    2100 9600
+	1    0    0    -1  
 $EndComp
 $Comp
 L Cryptech_Alpha:C-EUC0402 C118
 U 1 1 58023F11
 P 4600 8200
 F 0 "C118" H 4680 8010 60  0000 L BNN
-	1    4600 8200
-	1    0    0    -1
+F 1 "~" H 4600 8200 50  0001 C CNN
 F 2 "Cryptech_Alpha_Footprints:C_0402" H 4680 8010 60  0001 C CNN
+F 3 "" H 4600 8200 50  0001 C CNN
+	1    4600 8200
+	1    0    0    -1  
 $EndComp
 $Comp
 L Cryptech_Alpha:C-EUC0402 C117
 U 1 1 58023F10
 P 4600 5000
 F 0 "C117" H 4680 4810 60  0000 L BNN
-	1    4600 5000
-	1    0    0    -1
+F 1 "~" H 4600 5000 50  0001 C CNN
 F 2 "Cryptech_Alpha_Footprints:C_0402" H 4680 4810 60  0001 C CNN
+F 3 "" H 4600 5000 50  0001 C CNN
+	1    4600 5000
+	1    0    0    -1  
 $EndComp
 $Comp
 L Cryptech_Alpha:C-EUC1210 C119
 U 1 1 58023F0F
 P 5000 5500
 F 0 "C119" H 5080 5310 60  0000 L BNN
-	1    5000 5500
-	1    0    0    -1
+F 1 "~" H 5000 5500 50  0001 C CNN
 F 2 "Cryptech_Alpha_Footprints:C_1210" H 5080 5310 60  0001 C CNN
+F 3 "" H 5000 5500 50  0001 C CNN
+	1    5000 5500
+	1    0    0    -1  
 $EndComp
 $Comp
 L Cryptech_Alpha:R-EU_R0402 R53
@@ -656,34 +668,40 @@ F 1 "62k" V 1550 6290 60  0000 R TNN
 F 2 "Cryptech_Alpha_Footprints:R_0402" H 1550 6290 60  0001 C CNN
 F 3 "" H 1550 6290 60  0000 C CNN
 	1    1600 6400
-	0    -1   -1   0
+	0    -1   -1   0   
 $EndComp
 $Comp
 L Cryptech_Alpha:C-EUC1210 C120
 U 1 1 58023F0D
 P 5000 8700
 F 0 "C120" H 5080 8510 60  0000 L BNN
-	1    5000 8700
-	1    0    0    -1
+F 1 "~" H 5000 8700 50  0001 C CNN
 F 2 "Cryptech_Alpha_Footprints:C_1210" H 5080 8510 60  0001 C CNN
+F 3 "" H 5000 8700 50  0001 C CNN
+	1    5000 8700
+	1    0    0    -1  
 $EndComp
 $Comp
 L Cryptech_Alpha:EN6347QI U14
 U 1 1 58023F0C
 P 3100 5500
 F 0 "U14" H 2740 6590 60  0000 L BNN
-	1    3100 5500
-	1    0    0    -1
+F 1 "~" H 3100 5500 50  0001 C CNN
 F 2 "Cryptech_Alpha_Footprints:QFN38" H 2740 6590 60  0001 C CNN
+F 3 "" H 3100 5500 50  0001 C CNN
+	1    3100 5500
+	1    0    0    -1  
 $EndComp
 $Comp
 L Cryptech_Alpha:EN6347QI U15
 U 1 1 58023F0B
 P 3100 8700
 F 0 "U15" H 2740 9790 60  0000 L BNN
-	1    3100 8700
-	1    0    0    -1
+F 1 "~" H 3100 8700 50  0001 C CNN
 F 2 "Cryptech_Alpha_Footprints:QFN38" H 2740 9790 60  0001 C CNN
+F 3 "" H 3100 8700 50  0001 C CNN
+	1    3100 8700
+	1    0    0    -1  
 $EndComp
 $Comp
 L Cryptech_Alpha:R-EU_R0402 R52
@@ -694,7 +712,7 @@ F 1 "4.7k" V 1540 5120 60  0000 R TNN
 F 2 "Cryptech_Alpha_Footprints:R_0402" H 1540 5120 60  0001 C CNN
 F 3 "" H 1540 5120 60  0000 C CNN
 	1    1600 5200
-	0    -1   -1   0
+	0    -1   -1   0   
 $EndComp
 $Comp
 L Cryptech_Alpha:R-EU_R0402 R56
@@ -705,7 +723,7 @@ F 1 "205k" V 4220 5360 60  0000 R TNN
 F 2 "Cryptech_Alpha_Footprints:R_0402" H 4220 5360 60  0001 C CNN
 F 3 "" H 4220 5360 60  0000 C CNN
 	1    4300 5100
-	0    -1   -1   0
+	0    -1   -1   0   
 $EndComp
 $Comp
 L Cryptech_Alpha:R-EU_R0402 R57
@@ -716,7 +734,7 @@ F 1 "147k" V 4210 5610 60  0000 R TNN
 F 2 "Cryptech_Alpha_Footprints:R_0402" H 4210 5610 60  0001 C CNN
 F 3 "" H 4210 5610 60  0000 C CNN
 	1    4300 5700
-	0    -1   -1   0
+	0    -1   -1   0   
 $EndComp
 $Comp
 L Cryptech_Alpha:R-EU_R0402 R60
@@ -727,7 +745,7 @@ F 1 "470" V 5450 5470 60  0000 R TNN
 F 2 "Cryptech_Alpha_Footprints:R_0402" H 5450 5470 60  0001 C CNN
 F 3 "" H 5450 5470 60  0000 C CNN
 	1    5500 5600
-	0    -1   -1   0
+	0    -1   -1   0   
 $EndComp
 $Comp
 L Cryptech_Alpha:BLM31PG330SN1_1206 FB5
@@ -738,16 +756,18 @@ F 1 "BLM31PG330SN1" H 5640 4810 60  0000 L BNN
 F 2 "Cryptech_Alpha_Footprints:L_1206" H 5640 4810 60  0001 C CNN
 F 3 "" H 5640 4810 60  0000 C CNN
 	1    5800 4900
-	1    0    0    -1
+	1    0    0    -1  
 $EndComp
 $Comp
 L Cryptech_Alpha:C-EUC1210 C114
 U 1 1 58023F05
 P 1100 8400
 F 0 "C114" H 1180 8210 60  0000 L BNN
-	1    1100 8400
-	1    0    0    -1
+F 1 "~" H 1100 8400 50  0001 C CNN
 F 2 "Cryptech_Alpha_Footprints:C_1210" H 1180 8210 60  0001 C CNN
+F 3 "" H 1100 8400 50  0001 C CNN
+	1    1100 8400
+	1    0    0    -1  
 $EndComp
 $Comp
 L Cryptech_Alpha:R-EU_R0402 R55
@@ -758,58 +778,58 @@ F 1 "62k" V 1570 9470 60  0000 R TNN
 F 2 "Cryptech_Alpha_Footprints:R_0402" H 1570 9470 60  0001 C CNN
 F 3 "" H 1570 9470 60  0000 C CNN
 	1    1600 9600
-	0    -1   -1   0
+	0    -1   -1   0   
 $EndComp
 NoConn ~ 3900 5800
 NoConn ~ 3900 9000
 Wire Wire Line
-      7000 4800 7000 4500
+	7000 4800 7000 4500
 $Comp
-L Cryptech_Alpha:FPGA_VCCAUX_1V8 #PWR?
+L Cryptech_Alpha:FPGA_VCCAUX_1V8 #PWR0110
 U 1 1 5AF45C1F
 P 7000 4500
-F 0 "#PWR?" H 7000 4350 50  0001 C CNN
+F 0 "#PWR0110" H 7000 4350 50  0001 C CNN
 F 1 "FPGA_VCCAUX_1V8" H 7015 4673 50  0000 C CNN
 F 2 "" H 7000 4500 60  0000 C CNN
 F 3 "" H 7000 4500 60  0000 C CNN
-      1    7000 4500
-      1    0    0    -1
+	1    7000 4500
+	1    0    0    -1  
 $EndComp
 Wire Wire Line
-      7000 8000 7000 7800
+	7000 8000 7000 7800
 $Comp
-L Cryptech_Alpha:VCCO_3V3 #PWR?
+L Cryptech_Alpha:VCCO_3V3 #PWR0111
 U 1 1 5AF49BC2
 P 7000 7800
-F 0 "#PWR?" H 7000 7650 50  0001 C CNN
+F 0 "#PWR0111" H 7000 7650 50  0001 C CNN
 F 1 "VCCO_3V3" H 7015 7973 50  0000 C CNN
 F 2 "" H 7000 7800 60  0000 C CNN
 F 3 "" H 7000 7800 60  0000 C CNN
-      1    7000 7800
-      1    0    0    -1
+	1    7000 7800
+	1    0    0    -1  
 $EndComp
 $Comp
-L power:PWR_FLAG #FLG?
+L power:PWR_FLAG #FLG0109
 U 1 1 5AFA31D0
 P 6050 4800
-F 0 "#FLG?" H 6050 4875 50  0001 C CNN
+F 0 "#FLG0109" H 6050 4875 50  0001 C CNN
 F 1 "PWR_FLAG" H 6050 4974 50  0000 C CNN
 F 2 "" H 6050 4800 50  0001 C CNN
 F 3 "~" H 6050 4800 50  0001 C CNN
-       1    6050 4800
-       1    0    0    -1  
+	1    6050 4800
+	1    0    0    -1  
 $EndComp
 Connection ~ 6050 4800
 $Comp
-L power:PWR_FLAG #FLG?
+L power:PWR_FLAG #FLG0110
 U 1 1 5AFB3F33
 P 6050 8000
-F 0 "#FLG?" H 6050 8075 50  0001 C CNN
+F 0 "#FLG0110" H 6050 8075 50  0001 C CNN
 F 1 "PWR_FLAG" H 6050 8174 50  0000 C CNN
 F 2 "" H 6050 8000 50  0001 C CNN
 F 3 "~" H 6050 8000 50  0001 C CNN
-       1    6050 8000
-       1    0    0    -1  
+	1    6050 8000
+	1    0    0    -1  
 $EndComp
 Connection ~ 6050 8000
-$EndSCHEMATC
\ No newline at end of file
+$EndSCHEMATC