Adding Von Neumann decorrelator core to Cryptech.HEADmaster

1 files changed, 273 insertions, 0 deletions

diff --git a/src/tb/tb_vndecorrelator.v b/src/tb/tb_vndecorrelator.v
new file mode 100644
index 0000000..9afe843
--- /dev/null
+++ b/src/tb/tb_vndecorrelator.v
@@ -0,0 +1,273 @@
+//======================================================================
+//
+// tb_vndecorrelator.v
+// -------------------
+// Testbench for the von Neumann decorrelator.
+//
+//
+// Author: Joachim Strömbergson
+// Copyright (c) 2019, NORDUnet A/S
+// All rights reserved.
+//
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+// - Redistributions of source code must retain the above copyright notice,
+//   this list of conditions and the following disclaimer.
+//
+// - Redistributions in binary form must reproduce the above copyright
+//   notice, this list of conditions and the following disclaimer in the
+//   documentation and/or other materials provided with the distribution.
+//
+// - Neither the name of the NORDUnet nor the names of its contributors may
+//   be used to endorse or promote products derived from this software
+//   without specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+//
+//======================================================================
+
+
+//------------------------------------------------------------------
+// Test module.
+//------------------------------------------------------------------
+module tb_vndecorrelator();
+
+
+  //----------------------------------------------------------------
+  // Internal constant and parameter definitions.
+  //----------------------------------------------------------------
+  parameter DEBUG           = 1;
+
+  parameter CLK_HALF_PERIOD = 1;
+  parameter CLK_PERIOD      = 2 * CLK_HALF_PERIOD;
+
+
+  //----------------------------------------------------------------
+  // Register and Wire declarations.
+  //----------------------------------------------------------------
+  reg [31 : 0] cycle_ctr;
+  reg [31 : 0] error_ctr;
+  reg [31 : 0] tc_ctr;
+
+  reg  tb_clk;
+  reg  tb_reset_n;
+  reg  tb_data_in;
+  reg  tb_syn_in;
+  wire tb_data_out;
+  wire tb_syn_out;
+
+
+  //----------------------------------------------------------------
+  // Device Under Test.
+  //----------------------------------------------------------------
+  vndecorrelator dut(
+                     .clk(tb_clk),
+                     .reset_n(tb_reset_n),
+
+                     .data_in(tb_data_in),
+                     .syn_in(tb_syn_in),
+
+                     .data_out(tb_data_out),
+                     .syn_out(tb_syn_out)
+                    );
+
+
+  //----------------------------------------------------------------
+  // clk_gen
+  //
+  // Always running clock generator process.
+  //----------------------------------------------------------------
+  always
+    begin : clk_gen
+      #CLK_HALF_PERIOD;
+      tb_clk = !tb_clk;
+    end // clk_gen
+
+
+  //--------------------------------------------------------------------
+  // dut_monitor
+  //
+  // Monitor displaying information every cycle.
+  // Includes the cycle counter.
+  //--------------------------------------------------------------------
+  always @ (posedge tb_clk)
+    begin : dut_monitor
+      cycle_ctr = cycle_ctr + 1;
+
+      if (DEBUG)
+        begin
+          $display("cycle = %016x:", cycle_ctr);
+          $display("reset_n  = 0x%01x", dut.reset_n);
+          $display("data_in  = 0x%01x, syn_in  = 0x%01x", dut.data_in, dut.syn_in);
+          $display("data_out = 0x%01x, syn_out = 0x%01x", dut.data_out, dut.syn_out);
+          $display("ctrl     = 0x%01x", dut.vndecorr_ctrl_reg);
+          $display("");
+        end
+    end // dut_monitor
+
+
+  //----------------------------------------------------------------
+  // reset_dut()
+  //
+  // Toggle reset to put the DUT into a well known state.
+  //----------------------------------------------------------------
+  task reset_dut;
+    begin
+      $display("*** Toggle reset.");
+      tb_reset_n = 0;
+      #(2 * CLK_PERIOD);
+      tb_reset_n = 1;
+    end
+  endtask // reset_dut
+
+
+  //----------------------------------------------------------------
+  // init_sim()
+  //
+  // Initialize all counters and testbed functionality as well
+  // as setting the DUT inputs to defined values.
+  //----------------------------------------------------------------
+  task init_sim;
+    begin
+      cycle_ctr = 0;
+      error_ctr = 0;
+      tc_ctr    = 0;
+
+      tb_clk     = 0;
+      tb_reset_n = 1;
+      tb_data_in = 0;
+      tb_syn_in  = 0;
+    end
+  endtask // init_sim
+
+
+  //----------------------------------------------------------------
+  // decorrelation_test
+  //
+  // The main test functionality.
+  //----------------------------------------------------------------
+  initial
+    begin : decorrelation_test
+      $display("   -= Testbench for the vpn Neumann decorrelator =-");
+      $display("    ===============================================");
+      $display("");
+
+      init_sim();
+      reset_dut();
+
+      // TC1: 1, 0 directly after eachother. Should emit 0.
+      #(10 *CLK_PERIOD);
+      $display("TC1: 1 directly followed by 0. Should emit 0.");
+      tb_data_in = 1;
+      tb_syn_in  = 1;
+      #(CLK_PERIOD);
+      tb_data_in = 0;
+      tb_syn_in  = 1;
+      #(CLK_PERIOD);
+      tb_syn_in  = 0;
+
+      // TC2: 0, 1 directly after eachother. Should generate 1.
+      #(10 *CLK_PERIOD);
+      $display("TC2: 0 directly followed by 1. Should emit 1.");
+      tb_data_in = 0;
+      tb_syn_in  = 1;
+      #(CLK_PERIOD);
+      tb_data_in = 1;
+      tb_syn_in  = 1;
+      #(CLK_PERIOD);
+      tb_syn_in  = 0;
+
+      // TC3: 0, 0 directly after eachother. Should emit nothing.
+      #(10 *CLK_PERIOD);
+      $display("TC3: 0 directly followed by 0. Should emit nothing.");
+      tb_data_in = 0;
+      tb_syn_in  = 1;
+      #(CLK_PERIOD);
+      tb_data_in = 0;
+      tb_syn_in  = 1;
+      #(CLK_PERIOD);
+      tb_syn_in  = 0;
+
+      // TC4: 1, 1 directly after eachother. Should enmit nothing.
+      #(10 *CLK_PERIOD);
+      $display("TC4: 1 directly followed by 1. Should emit nothing.");
+      tb_data_in = 1;
+      tb_syn_in  = 1;
+      #(CLK_PERIOD);
+      tb_data_in = 1;
+      tb_syn_in  = 1;
+      #(CLK_PERIOD);
+      tb_syn_in  = 0;
+
+      // TC5: 1, 0 with 10 cycles in between. Should emit 0.
+      #(10 *CLK_PERIOD);
+      $display("TC5: 1 and later 0. Should emit 0.");
+      tb_data_in = 1;
+      tb_syn_in  = 1;
+      #(CLK_PERIOD);
+      tb_syn_in  = 0;
+      #(10 *CLK_PERIOD);
+      tb_data_in = 0;
+      tb_syn_in  = 1;
+      #(CLK_PERIOD);
+      tb_syn_in  = 0;
+
+      // TC6: 0, 1 with 10 cycles in between. Should emit 1.
+      #(10 *CLK_PERIOD);
+      $display("TC6: 0 and later 1. Should emit 1.");
+      tb_data_in = 0;
+      tb_syn_in  = 1;
+      #(CLK_PERIOD);
+      tb_syn_in  = 0;
+      #(10 *CLK_PERIOD);
+      tb_data_in = 1;
+      tb_syn_in  = 1;
+      #(CLK_PERIOD);
+      tb_syn_in  = 0;
+
+      // TC7: 0, 0 with 10 cycles in between. Should emit nothing.
+      #(10 *CLK_PERIOD);
+      $display("TC7: 0 and later 0. Should emit nothing.");
+      tb_data_in = 0;
+      tb_syn_in  = 1;
+      #(CLK_PERIOD);
+      tb_syn_in  = 0;
+      #(10 *CLK_PERIOD);
+      tb_data_in = 0;
+      tb_syn_in  = 1;
+      #(CLK_PERIOD);
+      tb_syn_in  = 0;
+
+      // TC8: 1, 1 with 10 cycles in between. Should emit nothing.
+      #(10 *CLK_PERIOD);
+      $display("TC8: 1 and later 1. Should emit nothing.");
+      tb_data_in = 1;
+      tb_syn_in  = 1;
+      #(CLK_PERIOD);
+      tb_syn_in  = 0;
+      #(10 *CLK_PERIOD);
+      tb_data_in = 1;
+      tb_syn_in  = 1;
+      #(CLK_PERIOD);
+      tb_syn_in  = 0;
+
+      $display("");
+      $display("*** von Neumann decorrelation simulation done. ***");
+      $finish;
+    end // decorrelation_test
+endmodule // tb_vndecorrelator
+
+//======================================================================
+// EOF tb_vndecorrelator.v
+//======================================================================