//======================================================================
//
// keywrap_mem.v
// -------------
// Memory for AES KEY WRAP processing.
//
//
// Author: Joachim Strombergson
// Copyright (c) 2018, NORDUnet A/S
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
// - Redistributions of source code must retain the above copyright notice,
// this list of conditions and the following disclaimer.
//
// - Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
//
// - Neither the name of the NORDUnet nor the names of its contributors may
// be used to endorse or promote products derived from this software
// without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
//======================================================================
module keywrap_mem #(parameter API_ADDR_BITS = 11)
(
input wire clk,
input wire api_we,
input wire [(API_ADDR_BITS - 1) : 0] api_addr,
input wire [31 : 0] api_wr_data,
output wire [31 : 0] api_rd_data,
input wire core_we,
input wire [(API_ADDR_BITS - 2) : 0] core_addr,
input wire [63 : 0] core_wr_data,
output wire [63 : 0] core_rd_data
);
//----------------------------------------------------------------
// Parameters.
//----------------------------------------------------------------
localparam NUM_BANK_WORDS = 2 ** (API_ADDR_BITS - 1);
//----------------------------------------------------------------
// Registers and memories including control signals.
//----------------------------------------------------------------
reg [31 : 0] mem0 [0 : (NUM_BANK_WORDS - 1)];
reg [31 : 0] mem0_data;
reg [(API_ADDR_BITS - 2) : 0] mem0_addr;
reg mem0_we;
reg [31 : 0] mem1 [0 : (NUM_BANK_WORDS - 1)];
reg [31 : 0] mem1_data;
reg [(API_ADDR_BITS - 2) : 0] mem1_addr;
reg mem1_we;
//----------------------------------------------------------------
// Wires.
//----------------------------------------------------------------
reg [31 : 0] api_rd_data0;
reg [31 : 0] api_rd_data1;
reg [31 : 0] muxed_api_rd_data;
reg [31 : 0] core_rd_data0;
reg [31 : 0] core_rd_data1;
//----------------------------------------------------------------
// Assignments for ports.
//----------------------------------------------------------------
assign api_rd_data = muxed_api_rd_data;
assign core_rd_data = {core_rd_data0, core_rd_data1};
//----------------------------------------------------------------
// mem0_access
//----------------------------------------------------------------
always @(posedge clk)
begin : mem0_access
core_rd_data0 <= mem0[core_addr];
api_rd_data0 <= mem0[api_addr[(API_ADDR_BITS - 1) : 1]];
if (mem0_we)
mem0[mem0_addr] <= mem0_data;
end
//----------------------------------------------------------------
// mem1_access
//----------------------------------------------------------------
always @(posedge clk)
begin : mem1_access
core_rd_data1 <= mem1[core_addr];
api_rd_data1 <= mem1[api_addr[(API_ADDR_BITS - 1) : 1]];
if (mem1_we)
mem1[mem1_addr] <= mem1_data;
end
//----------------------------------------------------------------
// api_rd_data_mux
//----------------------------------------------------------------
always @*
begin : api_rd_data_mux
if (api_addr[0])
muxed_api_rd_data = api_rd_data1;
else
muxed_api_rd_data = api_rd_data0;
end
//----------------------------------------------------------------
// write_mux
// Mux that handles priority of writes and selection
// of memory bank to write api data to.
//----------------------------------------------------------------
always @*
begin : write_mux
mem0_data = 32'h0;
mem0_addr = {(API_ADDR_BITS - 1){1'h0}};
mem0_we = 1'h0;
mem1_data = 32'h0;
mem1_addr = {(API_ADDR_BITS - 1){1'h0}};
mem1_we = 1'h0;
if (core_we)
begin
mem0_data = core_wr_data[63 : 32];
mem0_addr = core_addr;
mem0_we = 1'h1;
mem1_data = core_wr_data[31 : 0];
mem1_addr = core_addr;
mem1_we = 1'h1;
end
else if (api_we)
begin
mem0_addr = api_addr[(API_ADDR_BITS - 1) : 1];
mem0_data = api_wr_data;
mem1_addr = api_addr[(API_ADDR_BITS - 1) : 1];
mem1_data = api_wr_data;
if (api_addr[0])
mem1_we = 1'h1;
else
mem0_we = 1'h1;
end
end
endmodule // keywrap_mem
//======================================================================
// EOF keywrap_mem.v
//======================================================================
