summaryrefslogtreecommitdiff
path: root/Device
diff options
context:
space:
mode:
Diffstat (limited to 'Device')
-rw-r--r--Device/startup_stm32f429xx.s1122
-rw-r--r--Device/system_stm32f4xx.c1109
2 files changed, 1148 insertions, 1083 deletions
diff --git a/Device/startup_stm32f429xx.s b/Device/startup_stm32f429xx.s
index eb207aa..f8ba161 100644
--- a/Device/startup_stm32f429xx.s
+++ b/Device/startup_stm32f429xx.s
@@ -1,561 +1,561 @@
-/**
- ******************************************************************************
- * @file startup_stm32f429xx.s
- * @author MCD Application Team
- * @version V2.1.0
- * @date 19-June-2014
- * @brief STM32F429xx Devices vector table for Atollic TrueSTUDIO toolchain.
- * This module performs:
- * - Set the initial SP
- * - Set the initial PC == Reset_Handler,
- * - Set the vector table entries with the exceptions ISR address
- * - Branches to main in the C library (which eventually
- * calls main()).
- * After Reset the Cortex-M4 processor is in Thread mode,
- * priority is Privileged, and the Stack is set to Main.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
- .syntax unified
- .cpu cortex-m4
- .fpu softvfp
- .thumb
-
-.global g_pfnVectors
-.global Default_Handler
-
-/* start address for the initialization values of the .data section.
-defined in linker script */
-.word _sidata
-/* start address for the .data section. defined in linker script */
-.word _sdata
-/* end address for the .data section. defined in linker script */
-.word _edata
-/* start address for the .bss section. defined in linker script */
-.word _sbss
-/* end address for the .bss section. defined in linker script */
-.word _ebss
-/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
-
-/**
- * @brief This is the code that gets called when the processor first
- * starts execution following a reset event. Only the absolutely
- * necessary set is performed, after which the application
- * supplied main() routine is called.
- * @param None
- * @retval : None
-*/
-
- .section .text.Reset_Handler
- .weak Reset_Handler
- .type Reset_Handler, %function
-Reset_Handler:
- ldr sp, =_estack /* set stack pointer */
-
-/* Copy the data segment initializers from flash to SRAM */
- movs r1, #0
- b LoopCopyDataInit
-
-CopyDataInit:
- ldr r3, =_sidata
- ldr r3, [r3, r1]
- str r3, [r0, r1]
- adds r1, r1, #4
-
-LoopCopyDataInit:
- ldr r0, =_sdata
- ldr r3, =_edata
- adds r2, r0, r1
- cmp r2, r3
- bcc CopyDataInit
- ldr r2, =_sbss
- b LoopFillZerobss
-/* Zero fill the bss segment. */
-FillZerobss:
- movs r3, #0
- str r3, [r2], #4
-
-LoopFillZerobss:
- ldr r3, = _ebss
- cmp r2, r3
- bcc FillZerobss
-
-/* Call the clock system intitialization function.*/
- bl SystemInit
-/* Call static constructors */
- bl __libc_init_array
-/* Call the application's entry point.*/
- bl main
- bx lr
-.size Reset_Handler, .-Reset_Handler
-
-/**
- * @brief This is the code that gets called when the processor receives an
- * unexpected interrupt. This simply enters an infinite loop, preserving
- * the system state for examination by a debugger.
- * @param None
- * @retval None
-*/
- .section .text.Default_Handler,"ax",%progbits
-Default_Handler:
-Infinite_Loop:
- b Infinite_Loop
- .size Default_Handler, .-Default_Handler
-/******************************************************************************
-*
-* The minimal vector table for a Cortex M3. Note that the proper constructs
-* must be placed on this to ensure that it ends up at physical address
-* 0x0000.0000.
-*
-*******************************************************************************/
- .section .isr_vector,"a",%progbits
- .type g_pfnVectors, %object
- .size g_pfnVectors, .-g_pfnVectors
-
-g_pfnVectors:
- .word _estack
- .word Reset_Handler
-
- .word NMI_Handler
- .word HardFault_Handler
- .word MemManage_Handler
- .word BusFault_Handler
- .word UsageFault_Handler
- .word 0
- .word 0
- .word 0
- .word 0
- .word SVC_Handler
- .word DebugMon_Handler
- .word 0
- .word PendSV_Handler
- .word SysTick_Handler
-
- /* External Interrupts */
- .word WWDG_IRQHandler /* Window WatchDog */
- .word PVD_IRQHandler /* PVD through EXTI Line detection */
- .word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */
- .word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */
- .word FLASH_IRQHandler /* FLASH */
- .word RCC_IRQHandler /* RCC */
- .word EXTI0_IRQHandler /* EXTI Line0 */
- .word EXTI1_IRQHandler /* EXTI Line1 */
- .word EXTI2_IRQHandler /* EXTI Line2 */
- .word EXTI3_IRQHandler /* EXTI Line3 */
- .word EXTI4_IRQHandler /* EXTI Line4 */
- .word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */
- .word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */
- .word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */
- .word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */
- .word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */
- .word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */
- .word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */
- .word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */
- .word CAN1_TX_IRQHandler /* CAN1 TX */
- .word CAN1_RX0_IRQHandler /* CAN1 RX0 */
- .word CAN1_RX1_IRQHandler /* CAN1 RX1 */
- .word CAN1_SCE_IRQHandler /* CAN1 SCE */
- .word EXTI9_5_IRQHandler /* External Line[9:5]s */
- .word TIM1_BRK_TIM9_IRQHandler /* TIM1 Break and TIM9 */
- .word TIM1_UP_TIM10_IRQHandler /* TIM1 Update and TIM10 */
- .word TIM1_TRG_COM_TIM11_IRQHandler /* TIM1 Trigger and Commutation and TIM11 */
- .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
- .word TIM2_IRQHandler /* TIM2 */
- .word TIM3_IRQHandler /* TIM3 */
- .word TIM4_IRQHandler /* TIM4 */
- .word I2C1_EV_IRQHandler /* I2C1 Event */
- .word I2C1_ER_IRQHandler /* I2C1 Error */
- .word I2C2_EV_IRQHandler /* I2C2 Event */
- .word I2C2_ER_IRQHandler /* I2C2 Error */
- .word SPI1_IRQHandler /* SPI1 */
- .word SPI2_IRQHandler /* SPI2 */
- .word USART1_IRQHandler /* USART1 */
- .word USART2_IRQHandler /* USART2 */
- .word USART3_IRQHandler /* USART3 */
- .word EXTI15_10_IRQHandler /* External Line[15:10]s */
- .word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */
- .word OTG_FS_WKUP_IRQHandler /* USB OTG FS Wakeup through EXTI line */
- .word TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */
- .word TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */
- .word TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */
- .word TIM8_CC_IRQHandler /* TIM8 Capture Compare */
- .word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */
- .word FMC_IRQHandler /* FMC */
- .word SDIO_IRQHandler /* SDIO */
- .word TIM5_IRQHandler /* TIM5 */
- .word SPI3_IRQHandler /* SPI3 */
- .word UART4_IRQHandler /* UART4 */
- .word UART5_IRQHandler /* UART5 */
- .word TIM6_DAC_IRQHandler /* TIM6 and DAC1&2 underrun errors */
- .word TIM7_IRQHandler /* TIM7 */
- .word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */
- .word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */
- .word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */
- .word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */
- .word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */
- .word ETH_IRQHandler /* Ethernet */
- .word ETH_WKUP_IRQHandler /* Ethernet Wakeup through EXTI line */
- .word CAN2_TX_IRQHandler /* CAN2 TX */
- .word CAN2_RX0_IRQHandler /* CAN2 RX0 */
- .word CAN2_RX1_IRQHandler /* CAN2 RX1 */
- .word CAN2_SCE_IRQHandler /* CAN2 SCE */
- .word OTG_FS_IRQHandler /* USB OTG FS */
- .word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */
- .word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */
- .word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */
- .word USART6_IRQHandler /* USART6 */
- .word I2C3_EV_IRQHandler /* I2C3 event */
- .word I2C3_ER_IRQHandler /* I2C3 error */
- .word OTG_HS_EP1_OUT_IRQHandler /* USB OTG HS End Point 1 Out */
- .word OTG_HS_EP1_IN_IRQHandler /* USB OTG HS End Point 1 In */
- .word OTG_HS_WKUP_IRQHandler /* USB OTG HS Wakeup through EXTI */
- .word OTG_HS_IRQHandler /* USB OTG HS */
- .word DCMI_IRQHandler /* DCMI */
- .word 0 /* Reserved */
- .word HASH_RNG_IRQHandler /* Hash and Rng */
- .word FPU_IRQHandler /* FPU */
- .word UART7_IRQHandler /* UART7 */
- .word UART8_IRQHandler /* UART8 */
- .word SPI4_IRQHandler /* SPI4 */
- .word SPI5_IRQHandler /* SPI5 */
- .word SPI6_IRQHandler /* SPI6 */
- .word SAI1_IRQHandler /* SAI1 */
- .word LTDC_IRQHandler /* LTDC_IRQHandler */
- .word LTDC_ER_IRQHandler /* LTDC_ER_IRQHandler */
- .word DMA2D_IRQHandler /* DMA2D */
-
-/*******************************************************************************
-*
-* Provide weak aliases for each Exception handler to the Default_Handler.
-* As they are weak aliases, any function with the same name will override
-* this definition.
-*
-*******************************************************************************/
- .weak NMI_Handler
- .thumb_set NMI_Handler,Default_Handler
-
- .weak HardFault_Handler
- .thumb_set HardFault_Handler,Default_Handler
-
- .weak MemManage_Handler
- .thumb_set MemManage_Handler,Default_Handler
-
- .weak BusFault_Handler
- .thumb_set BusFault_Handler,Default_Handler
-
- .weak UsageFault_Handler
- .thumb_set UsageFault_Handler,Default_Handler
-
- .weak SVC_Handler
- .thumb_set SVC_Handler,Default_Handler
-
- .weak DebugMon_Handler
- .thumb_set DebugMon_Handler,Default_Handler
-
- .weak PendSV_Handler
- .thumb_set PendSV_Handler,Default_Handler
-
- .weak SysTick_Handler
- .thumb_set SysTick_Handler,Default_Handler
-
- .weak WWDG_IRQHandler
- .thumb_set WWDG_IRQHandler,Default_Handler
-
- .weak PVD_IRQHandler
- .thumb_set PVD_IRQHandler,Default_Handler
-
- .weak TAMP_STAMP_IRQHandler
- .thumb_set TAMP_STAMP_IRQHandler,Default_Handler
-
- .weak RTC_WKUP_IRQHandler
- .thumb_set RTC_WKUP_IRQHandler,Default_Handler
-
- .weak FLASH_IRQHandler
- .thumb_set FLASH_IRQHandler,Default_Handler
-
- .weak RCC_IRQHandler
- .thumb_set RCC_IRQHandler,Default_Handler
-
- .weak EXTI0_IRQHandler
- .thumb_set EXTI0_IRQHandler,Default_Handler
-
- .weak EXTI1_IRQHandler
- .thumb_set EXTI1_IRQHandler,Default_Handler
-
- .weak EXTI2_IRQHandler
- .thumb_set EXTI2_IRQHandler,Default_Handler
-
- .weak EXTI3_IRQHandler
- .thumb_set EXTI3_IRQHandler,Default_Handler
-
- .weak EXTI4_IRQHandler
- .thumb_set EXTI4_IRQHandler,Default_Handler
-
- .weak DMA1_Stream0_IRQHandler
- .thumb_set DMA1_Stream0_IRQHandler,Default_Handler
-
- .weak DMA1_Stream1_IRQHandler
- .thumb_set DMA1_Stream1_IRQHandler,Default_Handler
-
- .weak DMA1_Stream2_IRQHandler
- .thumb_set DMA1_Stream2_IRQHandler,Default_Handler
-
- .weak DMA1_Stream3_IRQHandler
- .thumb_set DMA1_Stream3_IRQHandler,Default_Handler
-
- .weak DMA1_Stream4_IRQHandler
- .thumb_set DMA1_Stream4_IRQHandler,Default_Handler
-
- .weak DMA1_Stream5_IRQHandler
- .thumb_set DMA1_Stream5_IRQHandler,Default_Handler
-
- .weak DMA1_Stream6_IRQHandler
- .thumb_set DMA1_Stream6_IRQHandler,Default_Handler
-
- .weak ADC_IRQHandler
- .thumb_set ADC_IRQHandler,Default_Handler
-
- .weak CAN1_TX_IRQHandler
- .thumb_set CAN1_TX_IRQHandler,Default_Handler
-
- .weak CAN1_RX0_IRQHandler
- .thumb_set CAN1_RX0_IRQHandler,Default_Handler
-
- .weak CAN1_RX1_IRQHandler
- .thumb_set CAN1_RX1_IRQHandler,Default_Handler
-
- .weak CAN1_SCE_IRQHandler
- .thumb_set CAN1_SCE_IRQHandler,Default_Handler
-
- .weak EXTI9_5_IRQHandler
- .thumb_set EXTI9_5_IRQHandler,Default_Handler
-
- .weak TIM1_BRK_TIM9_IRQHandler
- .thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler
-
- .weak TIM1_UP_TIM10_IRQHandler
- .thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler
-
- .weak TIM1_TRG_COM_TIM11_IRQHandler
- .thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler
-
- .weak TIM1_CC_IRQHandler
- .thumb_set TIM1_CC_IRQHandler,Default_Handler
-
- .weak TIM2_IRQHandler
- .thumb_set TIM2_IRQHandler,Default_Handler
-
- .weak TIM3_IRQHandler
- .thumb_set TIM3_IRQHandler,Default_Handler
-
- .weak TIM4_IRQHandler
- .thumb_set TIM4_IRQHandler,Default_Handler
-
- .weak I2C1_EV_IRQHandler
- .thumb_set I2C1_EV_IRQHandler,Default_Handler
-
- .weak I2C1_ER_IRQHandler
- .thumb_set I2C1_ER_IRQHandler,Default_Handler
-
- .weak I2C2_EV_IRQHandler
- .thumb_set I2C2_EV_IRQHandler,Default_Handler
-
- .weak I2C2_ER_IRQHandler
- .thumb_set I2C2_ER_IRQHandler,Default_Handler
-
- .weak SPI1_IRQHandler
- .thumb_set SPI1_IRQHandler,Default_Handler
-
- .weak SPI2_IRQHandler
- .thumb_set SPI2_IRQHandler,Default_Handler
-
- .weak USART1_IRQHandler
- .thumb_set USART1_IRQHandler,Default_Handler
-
- .weak USART2_IRQHandler
- .thumb_set USART2_IRQHandler,Default_Handler
-
- .weak USART3_IRQHandler
- .thumb_set USART3_IRQHandler,Default_Handler
-
- .weak EXTI15_10_IRQHandler
- .thumb_set EXTI15_10_IRQHandler,Default_Handler
-
- .weak RTC_Alarm_IRQHandler
- .thumb_set RTC_Alarm_IRQHandler,Default_Handler
-
- .weak OTG_FS_WKUP_IRQHandler
- .thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
-
- .weak TIM8_BRK_TIM12_IRQHandler
- .thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
-
- .weak TIM8_UP_TIM13_IRQHandler
- .thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
-
- .weak TIM8_TRG_COM_TIM14_IRQHandler
- .thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
-
- .weak TIM8_CC_IRQHandler
- .thumb_set TIM8_CC_IRQHandler,Default_Handler
-
- .weak DMA1_Stream7_IRQHandler
- .thumb_set DMA1_Stream7_IRQHandler,Default_Handler
-
- .weak FMC_IRQHandler
- .thumb_set FMC_IRQHandler,Default_Handler
-
- .weak SDIO_IRQHandler
- .thumb_set SDIO_IRQHandler,Default_Handler
-
- .weak TIM5_IRQHandler
- .thumb_set TIM5_IRQHandler,Default_Handler
-
- .weak SPI3_IRQHandler
- .thumb_set SPI3_IRQHandler,Default_Handler
-
- .weak UART4_IRQHandler
- .thumb_set UART4_IRQHandler,Default_Handler
-
- .weak UART5_IRQHandler
- .thumb_set UART5_IRQHandler,Default_Handler
-
- .weak TIM6_DAC_IRQHandler
- .thumb_set TIM6_DAC_IRQHandler,Default_Handler
-
- .weak TIM7_IRQHandler
- .thumb_set TIM7_IRQHandler,Default_Handler
-
- .weak DMA2_Stream0_IRQHandler
- .thumb_set DMA2_Stream0_IRQHandler,Default_Handler
-
- .weak DMA2_Stream1_IRQHandler
- .thumb_set DMA2_Stream1_IRQHandler,Default_Handler
-
- .weak DMA2_Stream2_IRQHandler
- .thumb_set DMA2_Stream2_IRQHandler,Default_Handler
-
- .weak DMA2_Stream3_IRQHandler
- .thumb_set DMA2_Stream3_IRQHandler,Default_Handler
-
- .weak DMA2_Stream4_IRQHandler
- .thumb_set DMA2_Stream4_IRQHandler,Default_Handler
-
- .weak ETH_IRQHandler
- .thumb_set ETH_IRQHandler,Default_Handler
-
- .weak ETH_WKUP_IRQHandler
- .thumb_set ETH_WKUP_IRQHandler,Default_Handler
-
- .weak CAN2_TX_IRQHandler
- .thumb_set CAN2_TX_IRQHandler,Default_Handler
-
- .weak CAN2_RX0_IRQHandler
- .thumb_set CAN2_RX0_IRQHandler,Default_Handler
-
- .weak CAN2_RX1_IRQHandler
- .thumb_set CAN2_RX1_IRQHandler,Default_Handler
-
- .weak CAN2_SCE_IRQHandler
- .thumb_set CAN2_SCE_IRQHandler,Default_Handler
-
- .weak OTG_FS_IRQHandler
- .thumb_set OTG_FS_IRQHandler,Default_Handler
-
- .weak DMA2_Stream5_IRQHandler
- .thumb_set DMA2_Stream5_IRQHandler,Default_Handler
-
- .weak DMA2_Stream6_IRQHandler
- .thumb_set DMA2_Stream6_IRQHandler,Default_Handler
-
- .weak DMA2_Stream7_IRQHandler
- .thumb_set DMA2_Stream7_IRQHandler,Default_Handler
-
- .weak USART6_IRQHandler
- .thumb_set USART6_IRQHandler,Default_Handler
-
- .weak I2C3_EV_IRQHandler
- .thumb_set I2C3_EV_IRQHandler,Default_Handler
-
- .weak I2C3_ER_IRQHandler
- .thumb_set I2C3_ER_IRQHandler,Default_Handler
-
- .weak OTG_HS_EP1_OUT_IRQHandler
- .thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler
-
- .weak OTG_HS_EP1_IN_IRQHandler
- .thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler
-
- .weak OTG_HS_WKUP_IRQHandler
- .thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler
-
- .weak OTG_HS_IRQHandler
- .thumb_set OTG_HS_IRQHandler,Default_Handler
-
- .weak DCMI_IRQHandler
- .thumb_set DCMI_IRQHandler,Default_Handler
-
- .weak HASH_RNG_IRQHandler
- .thumb_set HASH_RNG_IRQHandler,Default_Handler
-
- .weak FPU_IRQHandler
- .thumb_set FPU_IRQHandler,Default_Handler
-
- .weak UART7_IRQHandler
- .thumb_set UART7_IRQHandler,Default_Handler
-
- .weak UART8_IRQHandler
- .thumb_set UART8_IRQHandler,Default_Handler
-
- .weak SPI4_IRQHandler
- .thumb_set SPI4_IRQHandler,Default_Handler
-
- .weak SPI5_IRQHandler
- .thumb_set SPI5_IRQHandler,Default_Handler
-
- .weak SPI6_IRQHandler
- .thumb_set SPI6_IRQHandler,Default_Handler
-
- .weak SAI1_IRQHandler
- .thumb_set SAI1_IRQHandler,Default_Handler
-
- .weak LTDC_IRQHandler
- .thumb_set LTDC_IRQHandler,Default_Handler
-
- .weak LTDC_ER_IRQHandler
- .thumb_set LTDC_ER_IRQHandler,Default_Handler
-
- .weak DMA2D_IRQHandler
- .thumb_set DMA2D_IRQHandler,Default_Handler
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
-
-
+/**
+ ******************************************************************************
+ * @file startup_stm32f429xx.s
+ * @author MCD Application Team
+ * @version V2.3.2
+ * @date 26-June-2015
+ * @brief STM32F429xx Devices vector table for Atollic TrueSTUDIO toolchain.
+ * This module performs:
+ * - Set the initial SP
+ * - Set the initial PC == Reset_Handler,
+ * - Set the vector table entries with the exceptions ISR address
+ * - Branches to main in the C library (which eventually
+ * calls main()).
+ * After Reset the Cortex-M4 processor is in Thread mode,
+ * priority is Privileged, and the Stack is set to Main.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+ .syntax unified
+ .cpu cortex-m4
+ .fpu softvfp
+ .thumb
+
+.global g_pfnVectors
+.global Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word _sidata
+/* start address for the .data section. defined in linker script */
+.word _sdata
+/* end address for the .data section. defined in linker script */
+.word _edata
+/* start address for the .bss section. defined in linker script */
+.word _sbss
+/* end address for the .bss section. defined in linker script */
+.word _ebss
+/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
+
+/**
+ * @brief This is the code that gets called when the processor first
+ * starts execution following a reset event. Only the absolutely
+ * necessary set is performed, after which the application
+ * supplied main() routine is called.
+ * @param None
+ * @retval : None
+*/
+
+ .section .text.Reset_Handler
+ .weak Reset_Handler
+ .type Reset_Handler, %function
+Reset_Handler:
+ ldr sp, =_estack /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+ movs r1, #0
+ b LoopCopyDataInit
+
+CopyDataInit:
+ ldr r3, =_sidata
+ ldr r3, [r3, r1]
+ str r3, [r0, r1]
+ adds r1, r1, #4
+
+LoopCopyDataInit:
+ ldr r0, =_sdata
+ ldr r3, =_edata
+ adds r2, r0, r1
+ cmp r2, r3
+ bcc CopyDataInit
+ ldr r2, =_sbss
+ b LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+ movs r3, #0
+ str r3, [r2], #4
+
+LoopFillZerobss:
+ ldr r3, = _ebss
+ cmp r2, r3
+ bcc FillZerobss
+
+/* Call the clock system intitialization function.*/
+ bl SystemInit
+/* Call static constructors */
+ bl __libc_init_array
+/* Call the application's entry point.*/
+ bl main
+ bx lr
+.size Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief This is the code that gets called when the processor receives an
+ * unexpected interrupt. This simply enters an infinite loop, preserving
+ * the system state for examination by a debugger.
+ * @param None
+ * @retval None
+*/
+ .section .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+ b Infinite_Loop
+ .size Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+*******************************************************************************/
+ .section .isr_vector,"a",%progbits
+ .type g_pfnVectors, %object
+ .size g_pfnVectors, .-g_pfnVectors
+
+g_pfnVectors:
+ .word _estack
+ .word Reset_Handler
+
+ .word NMI_Handler
+ .word HardFault_Handler
+ .word MemManage_Handler
+ .word BusFault_Handler
+ .word UsageFault_Handler
+ .word 0
+ .word 0
+ .word 0
+ .word 0
+ .word SVC_Handler
+ .word DebugMon_Handler
+ .word 0
+ .word PendSV_Handler
+ .word SysTick_Handler
+
+ /* External Interrupts */
+ .word WWDG_IRQHandler /* Window WatchDog */
+ .word PVD_IRQHandler /* PVD through EXTI Line detection */
+ .word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */
+ .word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */
+ .word FLASH_IRQHandler /* FLASH */
+ .word RCC_IRQHandler /* RCC */
+ .word EXTI0_IRQHandler /* EXTI Line0 */
+ .word EXTI1_IRQHandler /* EXTI Line1 */
+ .word EXTI2_IRQHandler /* EXTI Line2 */
+ .word EXTI3_IRQHandler /* EXTI Line3 */
+ .word EXTI4_IRQHandler /* EXTI Line4 */
+ .word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */
+ .word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */
+ .word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */
+ .word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */
+ .word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */
+ .word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */
+ .word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */
+ .word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */
+ .word CAN1_TX_IRQHandler /* CAN1 TX */
+ .word CAN1_RX0_IRQHandler /* CAN1 RX0 */
+ .word CAN1_RX1_IRQHandler /* CAN1 RX1 */
+ .word CAN1_SCE_IRQHandler /* CAN1 SCE */
+ .word EXTI9_5_IRQHandler /* External Line[9:5]s */
+ .word TIM1_BRK_TIM9_IRQHandler /* TIM1 Break and TIM9 */
+ .word TIM1_UP_TIM10_IRQHandler /* TIM1 Update and TIM10 */
+ .word TIM1_TRG_COM_TIM11_IRQHandler /* TIM1 Trigger and Commutation and TIM11 */
+ .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
+ .word TIM2_IRQHandler /* TIM2 */
+ .word TIM3_IRQHandler /* TIM3 */
+ .word TIM4_IRQHandler /* TIM4 */
+ .word I2C1_EV_IRQHandler /* I2C1 Event */
+ .word I2C1_ER_IRQHandler /* I2C1 Error */
+ .word I2C2_EV_IRQHandler /* I2C2 Event */
+ .word I2C2_ER_IRQHandler /* I2C2 Error */
+ .word SPI1_IRQHandler /* SPI1 */
+ .word SPI2_IRQHandler /* SPI2 */
+ .word USART1_IRQHandler /* USART1 */
+ .word USART2_IRQHandler /* USART2 */
+ .word USART3_IRQHandler /* USART3 */
+ .word EXTI15_10_IRQHandler /* External Line[15:10]s */
+ .word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */
+ .word OTG_FS_WKUP_IRQHandler /* USB OTG FS Wakeup through EXTI line */
+ .word TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */
+ .word TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */
+ .word TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */
+ .word TIM8_CC_IRQHandler /* TIM8 Capture Compare */
+ .word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */
+ .word FMC_IRQHandler /* FMC */
+ .word SDIO_IRQHandler /* SDIO */
+ .word TIM5_IRQHandler /* TIM5 */
+ .word SPI3_IRQHandler /* SPI3 */
+ .word UART4_IRQHandler /* UART4 */
+ .word UART5_IRQHandler /* UART5 */
+ .word TIM6_DAC_IRQHandler /* TIM6 and DAC1&2 underrun errors */
+ .word TIM7_IRQHandler /* TIM7 */
+ .word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */
+ .word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */
+ .word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */
+ .word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */
+ .word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */
+ .word ETH_IRQHandler /* Ethernet */
+ .word ETH_WKUP_IRQHandler /* Ethernet Wakeup through EXTI line */
+ .word CAN2_TX_IRQHandler /* CAN2 TX */
+ .word CAN2_RX0_IRQHandler /* CAN2 RX0 */
+ .word CAN2_RX1_IRQHandler /* CAN2 RX1 */
+ .word CAN2_SCE_IRQHandler /* CAN2 SCE */
+ .word OTG_FS_IRQHandler /* USB OTG FS */
+ .word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */
+ .word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */
+ .word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */
+ .word USART6_IRQHandler /* USART6 */
+ .word I2C3_EV_IRQHandler /* I2C3 event */
+ .word I2C3_ER_IRQHandler /* I2C3 error */
+ .word OTG_HS_EP1_OUT_IRQHandler /* USB OTG HS End Point 1 Out */
+ .word OTG_HS_EP1_IN_IRQHandler /* USB OTG HS End Point 1 In */
+ .word OTG_HS_WKUP_IRQHandler /* USB OTG HS Wakeup through EXTI */
+ .word OTG_HS_IRQHandler /* USB OTG HS */
+ .word DCMI_IRQHandler /* DCMI */
+ .word 0 /* Reserved */
+ .word HASH_RNG_IRQHandler /* Hash and Rng */
+ .word FPU_IRQHandler /* FPU */
+ .word UART7_IRQHandler /* UART7 */
+ .word UART8_IRQHandler /* UART8 */
+ .word SPI4_IRQHandler /* SPI4 */
+ .word SPI5_IRQHandler /* SPI5 */
+ .word SPI6_IRQHandler /* SPI6 */
+ .word SAI1_IRQHandler /* SAI1 */
+ .word LTDC_IRQHandler /* LTDC_IRQHandler */
+ .word LTDC_ER_IRQHandler /* LTDC_ER_IRQHandler */
+ .word DMA2D_IRQHandler /* DMA2D */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+ .weak NMI_Handler
+ .thumb_set NMI_Handler,Default_Handler
+
+ .weak HardFault_Handler
+ .thumb_set HardFault_Handler,Default_Handler
+
+ .weak MemManage_Handler
+ .thumb_set MemManage_Handler,Default_Handler
+
+ .weak BusFault_Handler
+ .thumb_set BusFault_Handler,Default_Handler
+
+ .weak UsageFault_Handler
+ .thumb_set UsageFault_Handler,Default_Handler
+
+ .weak SVC_Handler
+ .thumb_set SVC_Handler,Default_Handler
+
+ .weak DebugMon_Handler
+ .thumb_set DebugMon_Handler,Default_Handler
+
+ .weak PendSV_Handler
+ .thumb_set PendSV_Handler,Default_Handler
+
+ .weak SysTick_Handler
+ .thumb_set SysTick_Handler,Default_Handler
+
+ .weak WWDG_IRQHandler
+ .thumb_set WWDG_IRQHandler,Default_Handler
+
+ .weak PVD_IRQHandler
+ .thumb_set PVD_IRQHandler,Default_Handler
+
+ .weak TAMP_STAMP_IRQHandler
+ .thumb_set TAMP_STAMP_IRQHandler,Default_Handler
+
+ .weak RTC_WKUP_IRQHandler
+ .thumb_set RTC_WKUP_IRQHandler,Default_Handler
+
+ .weak FLASH_IRQHandler
+ .thumb_set FLASH_IRQHandler,Default_Handler
+
+ .weak RCC_IRQHandler
+ .thumb_set RCC_IRQHandler,Default_Handler
+
+ .weak EXTI0_IRQHandler
+ .thumb_set EXTI0_IRQHandler,Default_Handler
+
+ .weak EXTI1_IRQHandler
+ .thumb_set EXTI1_IRQHandler,Default_Handler
+
+ .weak EXTI2_IRQHandler
+ .thumb_set EXTI2_IRQHandler,Default_Handler
+
+ .weak EXTI3_IRQHandler
+ .thumb_set EXTI3_IRQHandler,Default_Handler
+
+ .weak EXTI4_IRQHandler
+ .thumb_set EXTI4_IRQHandler,Default_Handler
+
+ .weak DMA1_Stream0_IRQHandler
+ .thumb_set DMA1_Stream0_IRQHandler,Default_Handler
+
+ .weak DMA1_Stream1_IRQHandler
+ .thumb_set DMA1_Stream1_IRQHandler,Default_Handler
+
+ .weak DMA1_Stream2_IRQHandler
+ .thumb_set DMA1_Stream2_IRQHandler,Default_Handler
+
+ .weak DMA1_Stream3_IRQHandler
+ .thumb_set DMA1_Stream3_IRQHandler,Default_Handler
+
+ .weak DMA1_Stream4_IRQHandler
+ .thumb_set DMA1_Stream4_IRQHandler,Default_Handler
+
+ .weak DMA1_Stream5_IRQHandler
+ .thumb_set DMA1_Stream5_IRQHandler,Default_Handler
+
+ .weak DMA1_Stream6_IRQHandler
+ .thumb_set DMA1_Stream6_IRQHandler,Default_Handler
+
+ .weak ADC_IRQHandler
+ .thumb_set ADC_IRQHandler,Default_Handler
+
+ .weak CAN1_TX_IRQHandler
+ .thumb_set CAN1_TX_IRQHandler,Default_Handler
+
+ .weak CAN1_RX0_IRQHandler
+ .thumb_set CAN1_RX0_IRQHandler,Default_Handler
+
+ .weak CAN1_RX1_IRQHandler
+ .thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+ .weak CAN1_SCE_IRQHandler
+ .thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+ .weak EXTI9_5_IRQHandler
+ .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+ .weak TIM1_BRK_TIM9_IRQHandler
+ .thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler
+
+ .weak TIM1_UP_TIM10_IRQHandler
+ .thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler
+
+ .weak TIM1_TRG_COM_TIM11_IRQHandler
+ .thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler
+
+ .weak TIM1_CC_IRQHandler
+ .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+ .weak TIM2_IRQHandler
+ .thumb_set TIM2_IRQHandler,Default_Handler
+
+ .weak TIM3_IRQHandler
+ .thumb_set TIM3_IRQHandler,Default_Handler
+
+ .weak TIM4_IRQHandler
+ .thumb_set TIM4_IRQHandler,Default_Handler
+
+ .weak I2C1_EV_IRQHandler
+ .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+ .weak I2C1_ER_IRQHandler
+ .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+ .weak I2C2_EV_IRQHandler
+ .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+ .weak I2C2_ER_IRQHandler
+ .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+ .weak SPI1_IRQHandler
+ .thumb_set SPI1_IRQHandler,Default_Handler
+
+ .weak SPI2_IRQHandler
+ .thumb_set SPI2_IRQHandler,Default_Handler
+
+ .weak USART1_IRQHandler
+ .thumb_set USART1_IRQHandler,Default_Handler
+
+ .weak USART2_IRQHandler
+ .thumb_set USART2_IRQHandler,Default_Handler
+
+ .weak USART3_IRQHandler
+ .thumb_set USART3_IRQHandler,Default_Handler
+
+ .weak EXTI15_10_IRQHandler
+ .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+ .weak RTC_Alarm_IRQHandler
+ .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+ .weak OTG_FS_WKUP_IRQHandler
+ .thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
+
+ .weak TIM8_BRK_TIM12_IRQHandler
+ .thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
+
+ .weak TIM8_UP_TIM13_IRQHandler
+ .thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
+
+ .weak TIM8_TRG_COM_TIM14_IRQHandler
+ .thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
+
+ .weak TIM8_CC_IRQHandler
+ .thumb_set TIM8_CC_IRQHandler,Default_Handler
+
+ .weak DMA1_Stream7_IRQHandler
+ .thumb_set DMA1_Stream7_IRQHandler,Default_Handler
+
+ .weak FMC_IRQHandler
+ .thumb_set FMC_IRQHandler,Default_Handler
+
+ .weak SDIO_IRQHandler
+ .thumb_set SDIO_IRQHandler,Default_Handler
+
+ .weak TIM5_IRQHandler
+ .thumb_set TIM5_IRQHandler,Default_Handler
+
+ .weak SPI3_IRQHandler
+ .thumb_set SPI3_IRQHandler,Default_Handler
+
+ .weak UART4_IRQHandler
+ .thumb_set UART4_IRQHandler,Default_Handler
+
+ .weak UART5_IRQHandler
+ .thumb_set UART5_IRQHandler,Default_Handler
+
+ .weak TIM6_DAC_IRQHandler
+ .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+ .weak TIM7_IRQHandler
+ .thumb_set TIM7_IRQHandler,Default_Handler
+
+ .weak DMA2_Stream0_IRQHandler
+ .thumb_set DMA2_Stream0_IRQHandler,Default_Handler
+
+ .weak DMA2_Stream1_IRQHandler
+ .thumb_set DMA2_Stream1_IRQHandler,Default_Handler
+
+ .weak DMA2_Stream2_IRQHandler
+ .thumb_set DMA2_Stream2_IRQHandler,Default_Handler
+
+ .weak DMA2_Stream3_IRQHandler
+ .thumb_set DMA2_Stream3_IRQHandler,Default_Handler
+
+ .weak DMA2_Stream4_IRQHandler
+ .thumb_set DMA2_Stream4_IRQHandler,Default_Handler
+
+ .weak ETH_IRQHandler
+ .thumb_set ETH_IRQHandler,Default_Handler
+
+ .weak ETH_WKUP_IRQHandler
+ .thumb_set ETH_WKUP_IRQHandler,Default_Handler
+
+ .weak CAN2_TX_IRQHandler
+ .thumb_set CAN2_TX_IRQHandler,Default_Handler
+
+ .weak CAN2_RX0_IRQHandler
+ .thumb_set CAN2_RX0_IRQHandler,Default_Handler
+
+ .weak CAN2_RX1_IRQHandler
+ .thumb_set CAN2_RX1_IRQHandler,Default_Handler
+
+ .weak CAN2_SCE_IRQHandler
+ .thumb_set CAN2_SCE_IRQHandler,Default_Handler
+
+ .weak OTG_FS_IRQHandler
+ .thumb_set OTG_FS_IRQHandler,Default_Handler
+
+ .weak DMA2_Stream5_IRQHandler
+ .thumb_set DMA2_Stream5_IRQHandler,Default_Handler
+
+ .weak DMA2_Stream6_IRQHandler
+ .thumb_set DMA2_Stream6_IRQHandler,Default_Handler
+
+ .weak DMA2_Stream7_IRQHandler
+ .thumb_set DMA2_Stream7_IRQHandler,Default_Handler
+
+ .weak USART6_IRQHandler
+ .thumb_set USART6_IRQHandler,Default_Handler
+
+ .weak I2C3_EV_IRQHandler
+ .thumb_set I2C3_EV_IRQHandler,Default_Handler
+
+ .weak I2C3_ER_IRQHandler
+ .thumb_set I2C3_ER_IRQHandler,Default_Handler
+
+ .weak OTG_HS_EP1_OUT_IRQHandler
+ .thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler
+
+ .weak OTG_HS_EP1_IN_IRQHandler
+ .thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler
+
+ .weak OTG_HS_WKUP_IRQHandler
+ .thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler
+
+ .weak OTG_HS_IRQHandler
+ .thumb_set OTG_HS_IRQHandler,Default_Handler
+
+ .weak DCMI_IRQHandler
+ .thumb_set DCMI_IRQHandler,Default_Handler
+
+ .weak HASH_RNG_IRQHandler
+ .thumb_set HASH_RNG_IRQHandler,Default_Handler
+
+ .weak FPU_IRQHandler
+ .thumb_set FPU_IRQHandler,Default_Handler
+
+ .weak UART7_IRQHandler
+ .thumb_set UART7_IRQHandler,Default_Handler
+
+ .weak UART8_IRQHandler
+ .thumb_set UART8_IRQHandler,Default_Handler
+
+ .weak SPI4_IRQHandler
+ .thumb_set SPI4_IRQHandler,Default_Handler
+
+ .weak SPI5_IRQHandler
+ .thumb_set SPI5_IRQHandler,Default_Handler
+
+ .weak SPI6_IRQHandler
+ .thumb_set SPI6_IRQHandler,Default_Handler
+
+ .weak SAI1_IRQHandler
+ .thumb_set SAI1_IRQHandler,Default_Handler
+
+ .weak LTDC_IRQHandler
+ .thumb_set LTDC_IRQHandler,Default_Handler
+
+ .weak LTDC_ER_IRQHandler
+ .thumb_set LTDC_ER_IRQHandler,Default_Handler
+
+ .weak DMA2D_IRQHandler
+ .thumb_set DMA2D_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
+
+
diff --git a/Device/system_stm32f4xx.c b/Device/system_stm32f4xx.c
index 08c591b..bc78fb2 100644
--- a/Device/system_stm32f4xx.c
+++ b/Device/system_stm32f4xx.c
@@ -1,522 +1,587 @@
-/**
- ******************************************************************************
- * @file system_stm32f4xx.c
- * @author MCD Application Team
- * @version V2.1.0
- * @date 19-June-2014
- * @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File.
- *
- * This file provides two functions and one global variable to be called from
- * user application:
- * - SystemInit(): This function is called at startup just after reset and
- * before branch to main program. This call is made inside
- * the "startup_stm32f4xx.s" file.
- *
- * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
- * by the user application to setup the SysTick
- * timer or configure other parameters.
- *
- * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
- * be called whenever the core clock is changed
- * during program execution.
- *
- *
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/** @addtogroup CMSIS
- * @{
- */
-
-/** @addtogroup stm32f4xx_system
- * @{
- */
-
-/** @addtogroup STM32F4xx_System_Private_Includes
- * @{
- */
-
-
-#include "stm32f4xx.h"
-
-#if !defined (HSE_VALUE)
- #define HSE_VALUE ((uint32_t)8000000) /*!< Default value of the External oscillator in Hz */
-#endif /* HSE_VALUE */
-
-#if !defined (HSI_VALUE)
- #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
-#endif /* HSI_VALUE */
-
-/**
- * @}
- */
-
-/** @addtogroup STM32F4xx_System_Private_TypesDefinitions
- * @{
- */
-
-/**
- * @}
- */
-
-/** @addtogroup STM32F4xx_System_Private_Defines
- * @{
- */
-
-/************************* Miscellaneous Configuration ************************/
-/*!< Uncomment the following line if you need to use external SRAM or SDRAM mounted
- on STM324xG_EVAL/STM324x9I_EVAL boards as data memory */
-#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
-/* #define DATA_IN_ExtSRAM */
-#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
-
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
-/* #define DATA_IN_ExtSDRAM */
-#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
-
-#if defined(DATA_IN_ExtSRAM) && defined(DATA_IN_ExtSDRAM)
- #error "Please select DATA_IN_ExtSRAM or DATA_IN_ExtSDRAM "
-#endif /* DATA_IN_ExtSRAM && DATA_IN_ExtSDRAM */
-
-/*!< Uncomment the following line if you need to relocate your vector Table in
- Internal SRAM. */
-/* #define VECT_TAB_SRAM */
-#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
- This value must be a multiple of 0x200. */
-/******************************************************************************/
-
-/**
- * @}
- */
-
-/** @addtogroup STM32F4xx_System_Private_Macros
- * @{
- */
-
-/**
- * @}
- */
-
-/** @addtogroup STM32F4xx_System_Private_Variables
- * @{
- */
- /* This variable is updated in three ways:
- 1) by calling CMSIS function SystemCoreClockUpdate()
- 2) by calling HAL API function HAL_RCC_GetHCLKFreq()
- 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
- Note: If you use this function to configure the system clock; then there
- is no need to call the 2 first functions listed above, since SystemCoreClock
- variable is updated automatically.
- */
- uint32_t SystemCoreClock = 16000000;
- __IO const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
-
-/**
- * @}
- */
-
-/** @addtogroup STM32F4xx_System_Private_FunctionPrototypes
- * @{
- */
-
-#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
- static void SystemInit_ExtMemCtl(void);
-#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
-
-/**
- * @}
- */
-
-/** @addtogroup STM32F4xx_System_Private_Functions
- * @{
- */
-
-/**
- * @brief Setup the microcontroller system
- * Initialize the FPU setting, vector table location and External memory
- * configuration.
- * @param None
- * @retval None
- */
-void SystemInit(void)
-{
- /* FPU settings ------------------------------------------------------------*/
- #if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
- SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */
- #endif
- /* Reset the RCC clock configuration to the default reset state ------------*/
- /* Set HSION bit */
- RCC->CR |= (uint32_t)0x00000001;
-
- /* Reset CFGR register */
- RCC->CFGR = 0x00000000;
-
- /* Reset HSEON, CSSON and PLLON bits */
- RCC->CR &= (uint32_t)0xFEF6FFFF;
-
- /* Reset PLLCFGR register */
- RCC->PLLCFGR = 0x24003010;
-
- /* Reset HSEBYP bit */
- RCC->CR &= (uint32_t)0xFFFBFFFF;
-
- /* Disable all interrupts */
- RCC->CIR = 0x00000000;
-
-#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
- SystemInit_ExtMemCtl();
-#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
-
- /* Configure the Vector Table location add offset address ------------------*/
-#ifdef VECT_TAB_SRAM
- SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
-#else
- SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
-#endif
-}
-
-/**
- * @brief Update SystemCoreClock variable according to Clock Register Values.
- * The SystemCoreClock variable contains the core clock (HCLK), it can
- * be used by the user application to setup the SysTick timer or configure
- * other parameters.
- *
- * @note Each time the core clock (HCLK) changes, this function must be called
- * to update SystemCoreClock variable value. Otherwise, any configuration
- * based on this variable will be incorrect.
- *
- * @note - The system frequency computed by this function is not the real
- * frequency in the chip. It is calculated based on the predefined
- * constant and the selected clock source:
- *
- * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
- *
- * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
- *
- * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
- * or HSI_VALUE(*) multiplied/divided by the PLL factors.
- *
- * (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
- * 16 MHz) but the real value may vary depending on the variations
- * in voltage and temperature.
- *
- * (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (its value
- * depends on the application requirements), user has to ensure that HSE_VALUE
- * is same as the real frequency of the crystal used. Otherwise, this function
- * may have wrong result.
- *
- * - The result of this function could be not correct when using fractional
- * value for HSE crystal.
- *
- * @param None
- * @retval None
- */
-void SystemCoreClockUpdate(void)
-{
- uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2;
-
- /* Get SYSCLK source -------------------------------------------------------*/
- tmp = RCC->CFGR & RCC_CFGR_SWS;
-
- switch (tmp)
- {
- case 0x00: /* HSI used as system clock source */
- SystemCoreClock = HSI_VALUE;
- break;
- case 0x04: /* HSE used as system clock source */
- SystemCoreClock = HSE_VALUE;
- break;
- case 0x08: /* PLL used as system clock source */
-
- /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N
- SYSCLK = PLL_VCO / PLL_P
- */
- pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;
- pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
-
- if (pllsource != 0)
- {
- /* HSE used as PLL clock source */
- pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
- }
- else
- {
- /* HSI used as PLL clock source */
- pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
- }
-
- pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;
- SystemCoreClock = pllvco/pllp;
- break;
- default:
- SystemCoreClock = HSI_VALUE;
- break;
- }
- /* Compute HCLK frequency --------------------------------------------------*/
- /* Get HCLK prescaler */
- tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
- /* HCLK frequency */
- SystemCoreClock >>= tmp;
-}
-
-#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
-/**
- * @brief Setup the external memory controller.
- * Called in startup_stm32f4xx.s before jump to main.
- * This function configures the external memories (SRAM/SDRAM)
- * This SRAM/SDRAM will be used as program data memory (including heap and stack).
- * @param None
- * @retval None
- */
-void SystemInit_ExtMemCtl(void)
-{
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
-#if defined (DATA_IN_ExtSDRAM)
- register uint32_t tmpreg = 0, timeout = 0xFFFF;
- register uint32_t index;
-
- /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface
- clock */
- RCC->AHB1ENR |= 0x000001F8;
-
- /* Connect PDx pins to FMC Alternate function */
- GPIOD->AFR[0] = 0x000000CC;
- GPIOD->AFR[1] = 0xCC000CCC;
- /* Configure PDx pins in Alternate function mode */
- GPIOD->MODER = 0xA02A000A;
- /* Configure PDx pins speed to 50 MHz */
- GPIOD->OSPEEDR = 0xA02A000A;
- /* Configure PDx pins Output type to push-pull */
- GPIOD->OTYPER = 0x00000000;
- /* No pull-up, pull-down for PDx pins */
- GPIOD->PUPDR = 0x00000000;
-
- /* Connect PEx pins to FMC Alternate function */
- GPIOE->AFR[0] = 0xC00000CC;
- GPIOE->AFR[1] = 0xCCCCCCCC;
- /* Configure PEx pins in Alternate function mode */
- GPIOE->MODER = 0xAAAA800A;
- /* Configure PEx pins speed to 50 MHz */
- GPIOE->OSPEEDR = 0xAAAA800A;
- /* Configure PEx pins Output type to push-pull */
- GPIOE->OTYPER = 0x00000000;
- /* No pull-up, pull-down for PEx pins */
- GPIOE->PUPDR = 0x00000000;
-
- /* Connect PFx pins to FMC Alternate function */
- GPIOF->AFR[0] = 0xCCCCCCCC;
- GPIOF->AFR[1] = 0xCCCCCCCC;
- /* Configure PFx pins in Alternate function mode */
- GPIOF->MODER = 0xAA800AAA;
- /* Configure PFx pins speed to 50 MHz */
- GPIOF->OSPEEDR = 0xAA800AAA;
- /* Configure PFx pins Output type to push-pull */
- GPIOF->OTYPER = 0x00000000;
- /* No pull-up, pull-down for PFx pins */
- GPIOF->PUPDR = 0x00000000;
-
- /* Connect PGx pins to FMC Alternate function */
- GPIOG->AFR[0] = 0xCCCCCCCC;
- GPIOG->AFR[1] = 0xCCCCCCCC;
- /* Configure PGx pins in Alternate function mode */
- GPIOG->MODER = 0xAAAAAAAA;
- /* Configure PGx pins speed to 50 MHz */
- GPIOG->OSPEEDR = 0xAAAAAAAA;
- /* Configure PGx pins Output type to push-pull */
- GPIOG->OTYPER = 0x00000000;
- /* No pull-up, pull-down for PGx pins */
- GPIOG->PUPDR = 0x00000000;
-
- /* Connect PHx pins to FMC Alternate function */
- GPIOH->AFR[0] = 0x00C0CC00;
- GPIOH->AFR[1] = 0xCCCCCCCC;
- /* Configure PHx pins in Alternate function mode */
- GPIOH->MODER = 0xAAAA08A0;
- /* Configure PHx pins speed to 50 MHz */
- GPIOH->OSPEEDR = 0xAAAA08A0;
- /* Configure PHx pins Output type to push-pull */
- GPIOH->OTYPER = 0x00000000;
- /* No pull-up, pull-down for PHx pins */
- GPIOH->PUPDR = 0x00000000;
-
- /* Connect PIx pins to FMC Alternate function */
- GPIOI->AFR[0] = 0xCCCCCCCC;
- GPIOI->AFR[1] = 0x00000CC0;
- /* Configure PIx pins in Alternate function mode */
- GPIOI->MODER = 0x0028AAAA;
- /* Configure PIx pins speed to 50 MHz */
- GPIOI->OSPEEDR = 0x0028AAAA;
- /* Configure PIx pins Output type to push-pull */
- GPIOI->OTYPER = 0x00000000;
- /* No pull-up, pull-down for PIx pins */
- GPIOI->PUPDR = 0x00000000;
-
-/*-- FMC Configuration ------------------------------------------------------*/
- /* Enable the FMC interface clock */
- RCC->AHB3ENR |= 0x00000001;
-
- /* Configure and enable SDRAM bank1 */
- FMC_Bank5_6->SDCR[0] = 0x000019E0;
- FMC_Bank5_6->SDTR[0] = 0x01115351;
-
- /* SDRAM initialization sequence */
- /* Clock enable command */
- FMC_Bank5_6->SDCMR = 0x00000011;
- tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
- while((tmpreg != 0) && (timeout-- > 0))
- {
- tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
- }
-
- /* Delay */
- for (index = 0; index<1000; index++);
-
- /* PALL command */
- FMC_Bank5_6->SDCMR = 0x00000012;
- timeout = 0xFFFF;
- while((tmpreg != 0) && (timeout-- > 0))
- {
- tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
- }
-
- /* Auto refresh command */
- FMC_Bank5_6->SDCMR = 0x00000073;
- timeout = 0xFFFF;
- while((tmpreg != 0) && (timeout-- > 0))
- {
- tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
- }
-
- /* MRD register program */
- FMC_Bank5_6->SDCMR = 0x00046014;
- timeout = 0xFFFF;
- while((tmpreg != 0) && (timeout-- > 0))
- {
- tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
- }
-
- /* Set refresh count */
- tmpreg = FMC_Bank5_6->SDRTR;
- FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
-
- /* Disable write protection */
- tmpreg = FMC_Bank5_6->SDCR[0];
- FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
-#endif /* DATA_IN_ExtSDRAM */
-#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
-
-#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
-#if defined(DATA_IN_ExtSRAM)
-/*-- GPIOs Configuration -----------------------------------------------------*/
- /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
- RCC->AHB1ENR |= 0x00000078;
-
- /* Connect PDx pins to FMC Alternate function */
- GPIOD->AFR[0] = 0x00CCC0CC;
- GPIOD->AFR[1] = 0xCCCCCCCC;
- /* Configure PDx pins in Alternate function mode */
- GPIOD->MODER = 0xAAAA0A8A;
- /* Configure PDx pins speed to 100 MHz */
- GPIOD->OSPEEDR = 0xFFFF0FCF;
- /* Configure PDx pins Output type to push-pull */
- GPIOD->OTYPER = 0x00000000;
- /* No pull-up, pull-down for PDx pins */
- GPIOD->PUPDR = 0x00000000;
-
- /* Connect PEx pins to FMC Alternate function */
- GPIOE->AFR[0] = 0xC00CC0CC;
- GPIOE->AFR[1] = 0xCCCCCCCC;
- /* Configure PEx pins in Alternate function mode */
- GPIOE->MODER = 0xAAAA828A;
- /* Configure PEx pins speed to 100 MHz */
- GPIOE->OSPEEDR = 0xFFFFC3CF;
- /* Configure PEx pins Output type to push-pull */
- GPIOE->OTYPER = 0x00000000;
- /* No pull-up, pull-down for PEx pins */
- GPIOE->PUPDR = 0x00000000;
-
- /* Connect PFx pins to FMC Alternate function */
- GPIOF->AFR[0] = 0x00CCCCCC;
- GPIOF->AFR[1] = 0xCCCC0000;
- /* Configure PFx pins in Alternate function mode */
- GPIOF->MODER = 0xAA000AAA;
- /* Configure PFx pins speed to 100 MHz */
- GPIOF->OSPEEDR = 0xFF000FFF;
- /* Configure PFx pins Output type to push-pull */
- GPIOF->OTYPER = 0x00000000;
- /* No pull-up, pull-down for PFx pins */
- GPIOF->PUPDR = 0x00000000;
-
- /* Connect PGx pins to FMC Alternate function */
- GPIOG->AFR[0] = 0x00CCCCCC;
- GPIOG->AFR[1] = 0x000000C0;
- /* Configure PGx pins in Alternate function mode */
- GPIOG->MODER = 0x00085AAA;
- /* Configure PGx pins speed to 100 MHz */
- GPIOG->OSPEEDR = 0x000CAFFF;
- /* Configure PGx pins Output type to push-pull */
- GPIOG->OTYPER = 0x00000000;
- /* No pull-up, pull-down for PGx pins */
- GPIOG->PUPDR = 0x00000000;
-
-/*-- FMC/FSMC Configuration --------------------------------------------------*/
- /* Enable the FMC/FSMC interface clock */
- RCC->AHB3ENR |= 0x00000001;
-
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
- /* Configure and enable Bank1_SRAM2 */
- FMC_Bank1->BTCR[2] = 0x00001011;
- FMC_Bank1->BTCR[3] = 0x00000201;
- FMC_Bank1E->BWTR[2] = 0x0fffffff;
-#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
-
-#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)
- /* Configure and enable Bank1_SRAM2 */
- FSMC_Bank1->BTCR[2] = 0x00001011;
- FSMC_Bank1->BTCR[3] = 0x00000201;
- FSMC_Bank1E->BWTR[2] = 0x0FFFFFFF;
-#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
-
-#endif /* DATA_IN_ExtSRAM */
-#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
-}
-#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+/**
+ ******************************************************************************
+ * @file system_stm32f4xx.c
+ * @author MCD Application Team
+ * @version V2.3.2
+ * @date 26-June-2015
+ * @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File.
+ *
+ * This file provides two functions and one global variable to be called from
+ * user application:
+ * - SystemInit(): This function is called at startup just after reset and
+ * before branch to main program. This call is made inside
+ * the "startup_stm32f4xx.s" file.
+ *
+ * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+ * by the user application to setup the SysTick
+ * timer or configure other parameters.
+ *
+ * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+ * be called whenever the core clock is changed
+ * during program execution.
+ *
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f4xx_system
+ * @{
+ */
+
+/** @addtogroup STM32F4xx_System_Private_Includes
+ * @{
+ */
+
+
+#include "stm32f4xx.h"
+
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)25000000) /*!< Default value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Private_Defines
+ * @{
+ */
+
+/************************* Miscellaneous Configuration ************************/
+/*!< Uncomment the following line if you need to use external SRAM or SDRAM as data memory */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/* #define DATA_IN_ExtSRAM */
+#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx)
+/* #define DATA_IN_ExtSDRAM */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+
+#if defined(DATA_IN_ExtSRAM) && defined(DATA_IN_ExtSDRAM)
+ #error "Please select DATA_IN_ExtSRAM or DATA_IN_ExtSDRAM "
+#endif /* DATA_IN_ExtSRAM && DATA_IN_ExtSDRAM */
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+ Internal SRAM. */
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
+ This value must be a multiple of 0x200. */
+/******************************************************************************/
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Private_Variables
+ * @{
+ */
+ /* This variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+ 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+ Note: If you use this function to configure the system clock; then there
+ is no need to call the 2 first functions listed above, since SystemCoreClock
+ variable is updated automatically.
+ */
+ uint32_t SystemCoreClock = 16000000;
+const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Private_FunctionPrototypes
+ * @{
+ */
+
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+ static void SystemInit_ExtMemCtl(void);
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Setup the microcontroller system
+ * Initialize the FPU setting, vector table location and External memory
+ * configuration.
+ * @param None
+ * @retval None
+ */
+void SystemInit(void)
+{
+ /* FPU settings ------------------------------------------------------------*/
+ #if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */
+ #endif
+ /* Reset the RCC clock configuration to the default reset state ------------*/
+ /* Set HSION bit */
+ RCC->CR |= (uint32_t)0x00000001;
+
+ /* Reset CFGR register */
+ RCC->CFGR = 0x00000000;
+
+ /* Reset HSEON, CSSON and PLLON bits */
+ RCC->CR &= (uint32_t)0xFEF6FFFF;
+
+ /* Reset PLLCFGR register */
+ RCC->PLLCFGR = 0x24003010;
+
+ /* Reset HSEBYP bit */
+ RCC->CR &= (uint32_t)0xFFFBFFFF;
+
+ /* Disable all interrupts */
+ RCC->CIR = 0x00000000;
+
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+ SystemInit_ExtMemCtl();
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+
+ /* Configure the Vector Table location add offset address ------------------*/
+#ifdef VECT_TAB_SRAM
+ SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+#else
+ SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
+#endif
+}
+
+/**
+ * @brief Update SystemCoreClock variable according to Clock Register Values.
+ * The SystemCoreClock variable contains the core clock (HCLK), it can
+ * be used by the user application to setup the SysTick timer or configure
+ * other parameters.
+ *
+ * @note Each time the core clock (HCLK) changes, this function must be called
+ * to update SystemCoreClock variable value. Otherwise, any configuration
+ * based on this variable will be incorrect.
+ *
+ * @note - The system frequency computed by this function is not the real
+ * frequency in the chip. It is calculated based on the predefined
+ * constant and the selected clock source:
+ *
+ * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+ *
+ * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+ *
+ * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
+ * or HSI_VALUE(*) multiplied/divided by the PLL factors.
+ *
+ * (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
+ * 16 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ *
+ * (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (its value
+ * depends on the application requirements), user has to ensure that HSE_VALUE
+ * is same as the real frequency of the crystal used. Otherwise, this function
+ * may have wrong result.
+ *
+ * - The result of this function could be not correct when using fractional
+ * value for HSE crystal.
+ *
+ * @param None
+ * @retval None
+ */
+void SystemCoreClockUpdate(void)
+{
+ uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2;
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ tmp = RCC->CFGR & RCC_CFGR_SWS;
+
+ switch (tmp)
+ {
+ case 0x00: /* HSI used as system clock source */
+ SystemCoreClock = HSI_VALUE;
+ break;
+ case 0x04: /* HSE used as system clock source */
+ SystemCoreClock = HSE_VALUE;
+ break;
+ case 0x08: /* PLL used as system clock source */
+
+ /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N
+ SYSCLK = PLL_VCO / PLL_P
+ */
+ pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;
+ pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
+
+ if (pllsource != 0)
+ {
+ /* HSE used as PLL clock source */
+ pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+ }
+ else
+ {
+ /* HSI used as PLL clock source */
+ pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+ }
+
+ pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;
+ SystemCoreClock = pllvco/pllp;
+ break;
+ default:
+ SystemCoreClock = HSI_VALUE;
+ break;
+ }
+ /* Compute HCLK frequency --------------------------------------------------*/
+ /* Get HCLK prescaler */
+ tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+ /* HCLK frequency */
+ SystemCoreClock >>= tmp;
+}
+
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+/**
+ * @brief Setup the external memory controller.
+ * Called in startup_stm32f4xx.s before jump to main.
+ * This function configures the external memories (SRAM/SDRAM)
+ * This SRAM/SDRAM will be used as program data memory (including heap and stack).
+ * @param None
+ * @retval None
+ */
+void SystemInit_ExtMemCtl(void)
+{
+ __IO uint32_t tmp = 0x00;
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+#if defined (DATA_IN_ExtSDRAM)
+ register uint32_t tmpreg = 0, timeout = 0xFFFF;
+ register uint32_t index;
+
+#if defined(STM32F446xx)
+ /* Enable GPIOA, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG interface
+ clock */
+ RCC->AHB1ENR |= 0x0000007D;
+#else
+ /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface
+ clock */
+ RCC->AHB1ENR |= 0x000001F8;
+#endif /* STM32F446xx */
+ /* Delay after an RCC peripheral clock enabling */
+ tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
+
+#if defined(STM32F446xx)
+ /* Connect PAx pins to FMC Alternate function */
+ GPIOA->AFR[0] |= 0xC0000000;
+ GPIOA->AFR[1] |= 0x00000000;
+ /* Configure PDx pins in Alternate function mode */
+ GPIOA->MODER |= 0x00008000;
+ /* Configure PDx pins speed to 50 MHz */
+ GPIOA->OSPEEDR |= 0x00008000;
+ /* Configure PDx pins Output type to push-pull */
+ GPIOA->OTYPER |= 0x00000000;
+ /* No pull-up, pull-down for PDx pins */
+ GPIOA->PUPDR |= 0x00000000;
+
+ /* Connect PCx pins to FMC Alternate function */
+ GPIOC->AFR[0] |= 0x00CC0000;
+ GPIOC->AFR[1] |= 0x00000000;
+ /* Configure PDx pins in Alternate function mode */
+ GPIOC->MODER |= 0x00000A00;
+ /* Configure PDx pins speed to 50 MHz */
+ GPIOC->OSPEEDR |= 0x00000A00;
+ /* Configure PDx pins Output type to push-pull */
+ GPIOC->OTYPER |= 0x00000000;
+ /* No pull-up, pull-down for PDx pins */
+ GPIOC->PUPDR |= 0x00000000;
+#endif /* STM32F446xx */
+
+ /* Connect PDx pins to FMC Alternate function */
+ GPIOD->AFR[0] = 0x000000CC;
+ GPIOD->AFR[1] = 0xCC000CCC;
+ /* Configure PDx pins in Alternate function mode */
+ GPIOD->MODER = 0xA02A000A;
+ /* Configure PDx pins speed to 50 MHz */
+ GPIOD->OSPEEDR = 0xA02A000A;
+ /* Configure PDx pins Output type to push-pull */
+ GPIOD->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PDx pins */
+ GPIOD->PUPDR = 0x00000000;
+
+ /* Connect PEx pins to FMC Alternate function */
+ GPIOE->AFR[0] = 0xC00000CC;
+ GPIOE->AFR[1] = 0xCCCCCCCC;
+ /* Configure PEx pins in Alternate function mode */
+ GPIOE->MODER = 0xAAAA800A;
+ /* Configure PEx pins speed to 50 MHz */
+ GPIOE->OSPEEDR = 0xAAAA800A;
+ /* Configure PEx pins Output type to push-pull */
+ GPIOE->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PEx pins */
+ GPIOE->PUPDR = 0x00000000;
+
+ /* Connect PFx pins to FMC Alternate function */
+ GPIOF->AFR[0] = 0xCCCCCCCC;
+ GPIOF->AFR[1] = 0xCCCCCCCC;
+ /* Configure PFx pins in Alternate function mode */
+ GPIOF->MODER = 0xAA800AAA;
+ /* Configure PFx pins speed to 50 MHz */
+ GPIOF->OSPEEDR = 0xAA800AAA;
+ /* Configure PFx pins Output type to push-pull */
+ GPIOF->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PFx pins */
+ GPIOF->PUPDR = 0x00000000;
+
+ /* Connect PGx pins to FMC Alternate function */
+ GPIOG->AFR[0] = 0xCCCCCCCC;
+ GPIOG->AFR[1] = 0xCCCCCCCC;
+ /* Configure PGx pins in Alternate function mode */
+ GPIOG->MODER = 0xAAAAAAAA;
+ /* Configure PGx pins speed to 50 MHz */
+ GPIOG->OSPEEDR = 0xAAAAAAAA;
+ /* Configure PGx pins Output type to push-pull */
+ GPIOG->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PGx pins */
+ GPIOG->PUPDR = 0x00000000;
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+ /* Connect PHx pins to FMC Alternate function */
+ GPIOH->AFR[0] = 0x00C0CC00;
+ GPIOH->AFR[1] = 0xCCCCCCCC;
+ /* Configure PHx pins in Alternate function mode */
+ GPIOH->MODER = 0xAAAA08A0;
+ /* Configure PHx pins speed to 50 MHz */
+ GPIOH->OSPEEDR = 0xAAAA08A0;
+ /* Configure PHx pins Output type to push-pull */
+ GPIOH->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PHx pins */
+ GPIOH->PUPDR = 0x00000000;
+
+ /* Connect PIx pins to FMC Alternate function */
+ GPIOI->AFR[0] = 0xCCCCCCCC;
+ GPIOI->AFR[1] = 0x00000CC0;
+ /* Configure PIx pins in Alternate function mode */
+ GPIOI->MODER = 0x0028AAAA;
+ /* Configure PIx pins speed to 50 MHz */
+ GPIOI->OSPEEDR = 0x0028AAAA;
+ /* Configure PIx pins Output type to push-pull */
+ GPIOI->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PIx pins */
+ GPIOI->PUPDR = 0x00000000;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+/*-- FMC Configuration -------------------------------------------------------*/
+ /* Enable the FMC interface clock */
+ RCC->AHB3ENR |= 0x00000001;
+ /* Delay after an RCC peripheral clock enabling */
+ tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+
+ /* Configure and enable SDRAM bank1 */
+#if defined(STM32F446xx)
+ FMC_Bank5_6->SDCR[0] = 0x00001954;
+#else
+ FMC_Bank5_6->SDCR[0] = 0x000019E4;
+#endif /* STM32F446xx */
+ FMC_Bank5_6->SDTR[0] = 0x01115351;
+
+ /* SDRAM initialization sequence */
+ /* Clock enable command */
+ FMC_Bank5_6->SDCMR = 0x00000011;
+ tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+ while((tmpreg != 0) && (timeout-- > 0))
+ {
+ tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+ }
+
+ /* Delay */
+ for (index = 0; index<1000; index++);
+
+ /* PALL command */
+ FMC_Bank5_6->SDCMR = 0x00000012;
+ timeout = 0xFFFF;
+ while((tmpreg != 0) && (timeout-- > 0))
+ {
+ tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+ }
+
+ /* Auto refresh command */
+#if defined(STM32F446xx)
+ FMC_Bank5_6->SDCMR = 0x000000F3;
+#else
+ FMC_Bank5_6->SDCMR = 0x00000073;
+#endif /* STM32F446xx */
+ timeout = 0xFFFF;
+ while((tmpreg != 0) && (timeout-- > 0))
+ {
+ tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+ }
+
+ /* MRD register program */
+#if defined(STM32F446xx)
+ FMC_Bank5_6->SDCMR = 0x00044014;
+#else
+ FMC_Bank5_6->SDCMR = 0x00046014;
+#endif /* STM32F446xx */
+ timeout = 0xFFFF;
+ while((tmpreg != 0) && (timeout-- > 0))
+ {
+ tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+ }
+
+ /* Set refresh count */
+ tmpreg = FMC_Bank5_6->SDRTR;
+#if defined(STM32F446xx)
+ FMC_Bank5_6->SDRTR = (tmpreg | (0x0000050C<<1));
+#else
+ FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
+#endif /* STM32F446xx */
+
+ /* Disable write protection */
+ tmpreg = FMC_Bank5_6->SDCR[0];
+ FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
+#endif /* DATA_IN_ExtSDRAM */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+
+#if defined(DATA_IN_ExtSRAM)
+/*-- GPIOs Configuration -----------------------------------------------------*/
+ /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
+ RCC->AHB1ENR |= 0x00000078;
+ /* Delay after an RCC peripheral clock enabling */
+ tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);
+
+ /* Connect PDx pins to FMC Alternate function */
+ GPIOD->AFR[0] = 0x00CCC0CC;
+ GPIOD->AFR[1] = 0xCCCCCCCC;
+ /* Configure PDx pins in Alternate function mode */
+ GPIOD->MODER = 0xAAAA0A8A;
+ /* Configure PDx pins speed to 100 MHz */
+ GPIOD->OSPEEDR = 0xFFFF0FCF;
+ /* Configure PDx pins Output type to push-pull */
+ GPIOD->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PDx pins */
+ GPIOD->PUPDR = 0x00000000;
+
+ /* Connect PEx pins to FMC Alternate function */
+ GPIOE->AFR[0] = 0xC00CC0CC;
+ GPIOE->AFR[1] = 0xCCCCCCCC;
+ /* Configure PEx pins in Alternate function mode */
+ GPIOE->MODER = 0xAAAA828A;
+ /* Configure PEx pins speed to 100 MHz */
+ GPIOE->OSPEEDR = 0xFFFFC3CF;
+ /* Configure PEx pins Output type to push-pull */
+ GPIOE->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PEx pins */
+ GPIOE->PUPDR = 0x00000000;
+
+ /* Connect PFx pins to FMC Alternate function */
+ GPIOF->AFR[0] = 0x00CCCCCC;
+ GPIOF->AFR[1] = 0xCCCC0000;
+ /* Configure PFx pins in Alternate function mode */
+ GPIOF->MODER = 0xAA000AAA;
+ /* Configure PFx pins speed to 100 MHz */
+ GPIOF->OSPEEDR = 0xFF000FFF;
+ /* Configure PFx pins Output type to push-pull */
+ GPIOF->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PFx pins */
+ GPIOF->PUPDR = 0x00000000;
+
+ /* Connect PGx pins to FMC Alternate function */
+ GPIOG->AFR[0] = 0x00CCCCCC;
+ GPIOG->AFR[1] = 0x000000C0;
+ /* Configure PGx pins in Alternate function mode */
+ GPIOG->MODER = 0x00085AAA;
+ /* Configure PGx pins speed to 100 MHz */
+ GPIOG->OSPEEDR = 0x000CAFFF;
+ /* Configure PGx pins Output type to push-pull */
+ GPIOG->OTYPER = 0x00000000;
+ /* No pull-up, pull-down for PGx pins */
+ GPIOG->PUPDR = 0x00000000;
+
+/*-- FMC/FSMC Configuration --------------------------------------------------*/
+ /* Enable the FMC/FSMC interface clock */
+ RCC->AHB3ENR |= 0x00000001;
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+ /* Delay after an RCC peripheral clock enabling */
+ tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+ /* Configure and enable Bank1_SRAM2 */
+ FMC_Bank1->BTCR[2] = 0x00001011;
+ FMC_Bank1->BTCR[3] = 0x00000201;
+ FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)
+ /* Delay after an RCC peripheral clock enabling */
+ tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);
+ /* Configure and enable Bank1_SRAM2 */
+ FSMC_Bank1->BTCR[2] = 0x00001011;
+ FSMC_Bank1->BTCR[3] = 0x00000201;
+ FSMC_Bank1E->BWTR[2] = 0x0FFFFFFF;
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#endif /* DATA_IN_ExtSRAM */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+ (void)(tmp);
+}
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 07:21:17 +0000