1 files changed, 26 insertions, 8 deletions

diff --git a/src/entropy/stm_init.c b/src/entropy/stm_init.c
index 4bf35b5..5f69760 100644
--- a/src/entropy/stm_init.c
+++ b/src/entropy/stm_init.c
@@ -38,9 +38,6 @@
 
 /* Includes ------------------------------------------------------------------*/
 #include "stm_init.h"
-//#include "stm32f4xx_hal.h"
-//#include "stm32f4xx_hal_rcc.h"
-
 
 /** @addtogroup STM32F4xx_HAL_Examples
   * @{
@@ -54,6 +51,7 @@
 /* Private define ------------------------------------------------------------*/
 
 #define UART1_BAUD_RATE 460800
+#define UART2_BAUD_RATE 115200
 
 
 /* Private macro -------------------------------------------------------------*/
@@ -62,6 +60,7 @@
 static GPIO_InitTypeDef  GPIO_InitStruct;
 TIM_HandleTypeDef htim2;
 UART_HandleTypeDef huart1;
+UART_HandleTypeDef huart2;
 DMA_HandleTypeDef hdma_tim;
 
 /* Private function prototypes -----------------------------------------------*/
@@ -70,6 +69,7 @@ static void Error_Handler(void);
 static void MX_GPIO_Init(void);
 static void MX_TIM2_Init(uint32_t *counters_buf, uint16_t counters);
 static void MX_USART1_UART_Init(void);
+static void MX_USART2_UART_Init(void);
 /* Private functions ---------------------------------------------------------*/
 
 /**
@@ -103,6 +103,7 @@ void stm_init(uint32_t *buf0, uint16_t counters)
   MX_GPIO_Init();
   MX_TIM2_Init(buf0, counters);
   MX_USART1_UART_Init();
+  MX_USART2_UART_Init();
 }
 
 
@@ -153,7 +154,7 @@ static void SystemClock_Config(void)
   RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV8;
   RCC_OscInitStruct.PLL.PLLQ = 7;
 
-  if(HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
+  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
     Error_Handler();
   }
 
@@ -163,7 +164,7 @@ static void SystemClock_Config(void)
   RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;		/* AHB prescaler */
   RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;		/* APB1 prescaler /1 gives 42 MHz APB1 */
   RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;		/* APB2 prescaler /1 gives 42 MHz APB2 */
-  if(HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK) {
+  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK) {
     Error_Handler();
   }
 
@@ -251,13 +252,12 @@ void MX_TIM2_Init(uint32_t *counters_buf, uint16_t counters)
  */
 void MX_USART1_UART_Init(void)
 {
-
   huart1.Instance          = USART1;
   huart1.Init.BaudRate     = UART1_BAUD_RATE;
   huart1.Init.WordLength   = UART_WORDLENGTH_8B;
   huart1.Init.StopBits     = UART_STOPBITS_1;
   huart1.Init.Parity       = UART_PARITY_NONE;
-  huart1.Init.Mode         = UART_MODE_TX; /* Only Transmit */
+  huart1.Init.Mode         = UART_MODE_TX_RX;
   huart1.Init.HwFlowCtl    = UART_HWCONTROL_NONE;
   huart1.Init.OverSampling = UART_OVERSAMPLING_16;
 
@@ -267,6 +267,24 @@ void MX_USART1_UART_Init(void)
   }
 }
 
+/* USART2 init function */
+void MX_USART2_UART_Init(void)
+{
+  huart2.Instance          = USART2;
+  huart2.Init.BaudRate     = UART2_BAUD_RATE;
+  huart2.Init.WordLength   = UART_WORDLENGTH_8B;
+  huart2.Init.StopBits     = UART_STOPBITS_1;
+  huart2.Init.Parity       = UART_PARITY_NONE;
+  huart2.Init.Mode         = UART_MODE_TX_RX;
+  huart2.Init.HwFlowCtl    = UART_HWCONTROL_NONE;
+  huart2.Init.OverSampling = UART_OVERSAMPLING_16;
+
+  if (HAL_UART_Init(&huart2) != HAL_OK) {
+    /* Initialization Error */
+    Error_Handler();
+  }
+}
+
 
 /**
   * @brief  This function is executed in case of error occurrence.
@@ -276,7 +294,7 @@ void MX_USART1_UART_Init(void)
 static void Error_Handler(void)
 {
   HAL_GPIO_WritePin(LED_PORT, LED_RED, GPIO_PIN_SET);
-  while(1) { ;  }
+  while(1) { ; }
 }
 
 #ifdef  USE_FULL_ASSERT