aboutsummaryrefslogblamecommitdiff
path: root/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c
blob: 9c6f49eb2c92780002e6a62fedeae2047eba9db1 (plain) (tree)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738
1739
1740
1741
1742
1743
1744
1745
1746
1747
1748
1749
1750
1751
1752
1753
1754
1755
1756
1757
1758
1759
1760
1761
1762
1763
1764
1765
1766
1767
1768
1769
1770
1771
1772
1773
1774
1775
1776
1777
1778
1779
1780
1781
1782
1783
1784
1785
1786
1787
1788
1789
1790
1791
1792
1793
1794
1795
1796
1797
1798
1799
1800
1801
1802
1803
1804
1805
1806
1807
1808
1809
1810
1811
1812
1813
1814
1815
1816
1817
1818
1819
1820
1821
1822
1823
1824
1825
1826
1827
1828
1829
1830
1831
1832
1833
1834
1835
1836
1837
1838
1839
1840
1841
1842
1843
1844
1845
1846
1847
1848
1849
1850
1851
1852
1853
1854
1855
1856
1857
1858
1859
1860
1861
1862
1863
1864
1865
1866
1867
1868
1869
1870
1871
1872
1873
1874
1875
1876
1877
1878
1879
1880
1881
1882
1883
1884
1885




























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































                                                                                                                                    
/**
  ******************************************************************************
  * @file    stm32f4xx_hal_uart.c
  * @author  MCD Application Team
  * @version V1.0.0
  * @date    18-February-2014
  * @brief   UART HAL module driver.
  *          This file provides firmware functions to manage the following 
  *          functionalities of the Universal Asynchronous Receiver Transmitter (UART) peripheral:
  *           + Initialization and de-initialization functions
  *           + IO operation functions
  *           + Peripheral Control functions  
  *           + Peripheral State and Errors functions  
  *           
  @verbatim       
  ==============================================================================
                        ##### How to use this driver #####
  ==============================================================================
  [..]
    The UART HAL driver can be used as follows:
    
    (#) Declare a UART_HandleTypeDef handle structure.
  
    (#) Initialize the UART low level resources by implement the HAL_UART_MspInit() API:
        (##) Enable the USARTx interface clock.
        (##) UART pins configuration:
            (+++) Enable the clock for the UART GPIOs.
            (+++) Configure these UART pins as alternate function pull-up.
        (##) NVIC configuration if you need to use interrupt process (HAL_UART_Transmit_IT()
             and HAL_UART_Receive_IT() APIs):
            (+++) Configure the USARTx interrupt priority.
            (+++) Enable the NVIC USART IRQ handle.
        (##) DMA Configuration if you need to use DMA process (HAL_UART_Transmit_DMA()
             and HAL_UART_Receive_DMA() APIs):
            (+++) Declare a DMA handle structure for the Tx/Rx stream.
            (+++) Enable the DMAx interface clock.
            (+++) Configure the declared DMA handle structure with the required 
                  Tx/Rx parameters.                
            (+++) Configure the DMA Tx/Rx Stream.
            (+++) Associate the initialized DMA handle to the UART DMA Tx/Rx handle.
            (+++) Configure the priority and enable the NVIC for the transfer complete 
                  interrupt on the DMA Tx/Rx Stream.

    (#) Program the Baud Rate, Word Length, Stop Bit, Parity, Hardware 
        flow control and Mode(Receiver/Transmitter) in the huart Init structure.

    (#) For the UART asynchronous mode, initialize the UART registers by calling
        the HAL_UART_Init() API.
    
    (#) For the UART Half duplex mode, initialize the UART registers by calling 
        the HAL_HalfDuplex_Init() API.
    
    (#) For the LIN mode, initialize the UART registers by calling the HAL_LIN_Init() API.
    
    (#) For the Multi-Processor mode, initialize the UART registers by calling 
        the HAL_MultiProcessor_Init() API.
        
        -@- The specific UART interrupts (Transmission complete interrupt, 
            RXNE interrupt and Error Interrupts) will be managed using the macros
            __HAL_UART_ENABLE_IT() and __HAL_UART_DISABLE_IT() inside the transmit 
            and receive process.
          
        -@- These API's(HAL_UART_Init() and HAL_HalfDuplex_Init()) configures also the 
            low level Hardware GPIO, CLOCK, CORTEX...etc) by calling the customed 
            HAL_UART_MspInit() API.
          
    (#) Three mode of operations are available within this driver :     
  
     *** Polling mode IO operation ***
     =================================
     [..]    
       (+) Send an amount of data in blocking mode using HAL_UART_Transmit() 
       (+) Receive an amount of data in blocking mode using HAL_UART_Receive()
       
     *** Interrupt mode IO operation ***    
     ===================================
     [..]    
       (+) Send an amount of data in non blocking mode using HAL_UART_Transmit_IT() 
       (+) At transmission end of half transfer HAL_UART_TxHalfCpltCallback is executed and user can 
            add his own code by customization of function pointer HAL_UART_TxHalfCpltCallback 
       (+) At transmission end of transfer HAL_UART_TxCpltCallback is executed and user can 
            add his own code by customization of function pointer HAL_UART_TxCpltCallback
       (+) Receive an amount of data in non blocking mode using HAL_UART_Receive_IT() 
       (+) At reception end of half transfer HAL_UART_RxHalfCpltCallback is executed and user can 
            add his own code by customization of function pointer HAL_UART_RxHalfCpltCallback 
       (+) At reception end of transfer HAL_UART_RxCpltCallback is executed and user can 
            add his own code by customization of function pointer HAL_UART_RxCpltCallback                                      
       (+) In case of transfer Error, HAL_UART_ErrorCallback() function is executed and user can 
            add his own code by customization of function pointer HAL_UART_ErrorCallback

     *** DMA mode IO operation ***    
     ==============================
     [..] 
       (+) Send an amount of data in non blocking mode (DMA) using HAL_UART_Transmit_DMA() 
       (+) At transmission end of half transfer HAL_UART_TxHalfCpltCallback is executed and user can 
            add his own code by customization of function pointer HAL_UART_TxHalfCpltCallback 
       (+) At transmission end of transfer HAL_UART_TxCpltCallback is executed and user can 
            add his own code by customization of function pointer HAL_UART_TxCpltCallback
       (+) Receive an amount of data in non blocking mode (DMA) using HAL_UART_Receive_DMA() 
       (+) At reception end of half transfer HAL_UART_RxHalfCpltCallback is executed and user can 
            add his own code by customization of function pointer HAL_UART_RxHalfCpltCallback 
       (+) At reception end of transfer HAL_UART_RxCpltCallback is executed and user can 
            add his own code by customization of function pointer HAL_UART_RxCpltCallback                                      
       (+) In case of transfer Error, HAL_UART_ErrorCallback() function is executed and user can 
            add his own code by customization of function pointer HAL_UART_ErrorCallback
       (+) Pause the DMA Transfer using HAL_UART_DMAPause()      
       (+) Resume the DMA Transfer using HAL_UART_DMAResume()  
       (+) Stop the DMA Transfer using HAL_UART_DMAStop()      
    
     *** UART HAL driver macros list ***
     ============================================= 
     [..]
       Below the list of most used macros in UART HAL driver.
       
      (+) __HAL_UART_ENABLE: Enable the UART peripheral 
      (+) __HAL_UART_DISABLE: Disable the UART peripheral     
      (+) __HAL_UART_GET_FLAG : Checks whether the specified UART flag is set or not
      (+) __HAL_UART_CLEAR_FLAG : Clears the specified UART pending flag
      (+) __HAL_UART_ENABLE_IT: Enables the specified UART interrupt
      (+) __HAL_UART_DISABLE_IT: Disables the specified UART interrupt
      
     [..] 
       (@) You can refer to the UART HAL driver header file for more useful macros 
      
  @endverbatim
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *   1. Redistributions of source code must retain the above copyright notice,
  *      this list of conditions and the following disclaimer.
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *   3. Neither the name of STMicroelectronics nor the names of its contributors
  *      may be used to endorse or promote products derived from this software
  *      without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
  */ 

/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"

/** @addtogroup STM32F4xx_HAL_Driver
  * @{
  */

/** @defgroup UART 
  * @brief HAL UART module driver
  * @{
  */
#ifdef HAL_UART_MODULE_ENABLED
    
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
#define UART_TIMEOUT_VALUE  22000
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
static void UART_SetConfig (UART_HandleTypeDef *huart);
static HAL_StatusTypeDef UART_Transmit_IT(UART_HandleTypeDef *huart);
static HAL_StatusTypeDef UART_Receive_IT(UART_HandleTypeDef *huart);
static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma);
static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma);
static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
static void UART_DMAError(DMA_HandleTypeDef *hdma); 
static HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Timeout);

/* Private functions ---------------------------------------------------------*/

/** @defgroup UART_Private_Functions
  * @{
  */

/** @defgroup UART_Group1 Initialization and de-initialization functions 
  *  @brief    Initialization and Configuration functions 
  *
@verbatim    
===============================================================================
            ##### Initialization and Configuration functions #####
 ===============================================================================  
    [..]
    This subsection provides a set of functions allowing to initialize the USARTx or the UARTy 
    in asynchronous mode.
      (+) For the asynchronous mode only these parameters can be configured: 
        (++) Baud Rate
        (++) Word Length 
        (++) Stop Bit
        (++) Parity: If the parity is enabled, then the MSB bit of the data written
             in the data register is transmitted but is changed by the parity bit.
             Depending on the frame length defined by the M bit (8-bits or 9-bits),
             the possible UART frame formats are as listed in the following table:
   +-------------------------------------------------------------+     
   |   M bit |  PCE bit  |            UART frame                 |
   |---------------------|---------------------------------------|             
   |    0    |    0      |    | SB | 8 bit data | STB |          |
   |---------|-----------|---------------------------------------|  
   |    0    |    1      |    | SB | 7 bit data | PB | STB |     |
   |---------|-----------|---------------------------------------|  
   |    1    |    0      |    | SB | 9 bit data | STB |          |
   |---------|-----------|---------------------------------------|  
   |    1    |    1      |    | SB | 8 bit data | PB | STB |     |
   +-------------------------------------------------------------+            
        (++) Hardware flow control
        (++) Receiver/transmitter modes
        (++) Over Sampling Methode
    [..]
    The HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init() and HAL_MultiProcessor_Init() APIs 
    follow respectively the UART asynchronous, UART Half duplex, LIN and Multi-Processor
    configuration procedures (details for the procedures are available in reference manual (RM0329)).

@endverbatim
  * @{
  */

/**
  * @brief  Initializes the UART mode according to the specified parameters in
  *         the UART_InitTypeDef and create the associated handle.
  * @param  huart: UART handle
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart)
{
  /* Check the UART handle allocation */
  if(huart == NULL)
  {
    return HAL_ERROR;
  }
  
  if(huart->Init.HwFlowCtl != UART_HWCONTROL_NONE)
  {
    /* Check the parameters */
    assert_param(IS_UART_HWFLOW_INSTANCE(huart->Instance));
  }
  else
  {
    /* Check the parameters */
    assert_param(IS_UART_INSTANCE(huart->Instance));
  }
  
  if(huart->State == HAL_UART_STATE_RESET)
  {  
    /* Init the low level hardware */
    HAL_UART_MspInit(huart);
  }
  
  huart->State = HAL_UART_STATE_BUSY;  
  
  /* Disable the peripheral */
  __HAL_UART_DISABLE(huart);
  
  /* Set the UART Communication parameters */
  UART_SetConfig(huart);
  
  /* In asynchronous mode, the following bits must be kept cleared: 
     - LINEN and CLKEN bits in the USART_CR2 register,
     - SCEN, HDSEL and IREN  bits in the USART_CR3 register.*/
  huart->Instance->CR2 &= ~(USART_CR2_LINEN | USART_CR2_CLKEN);
  huart->Instance->CR3 &= ~(USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN);
  
  /* Enable the peripheral */
  __HAL_UART_ENABLE(huart);
  
  /* Initialize the UART state */
  huart->ErrorCode = HAL_UART_ERROR_NONE;
  huart->State= HAL_UART_STATE_READY;
  
  return HAL_OK;
}

/**
  * @brief  Initializes the half-duplex mode according to the specified
  *         parameters in the UART_InitTypeDef and create the associated handle.
  * @param  huart: UART handle
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart)
{
  /* Check the UART handle allocation */
  if(huart == NULL)
  {
    return HAL_ERROR;
  }
  
  if(huart->State == HAL_UART_STATE_RESET)
  {   
    /* Init the low level hardware */
    HAL_UART_MspInit(huart);
  }
  
  /* Disable the peripheral */
  __HAL_UART_DISABLE(huart);
  
  /* Set the UART Communication parameters */
  UART_SetConfig(huart);
  
  /* In half-duplex mode, the following bits must be kept cleared: 
     - LINEN and CLKEN bits in the USART_CR2 register,
     - SCEN and IREN bits in the USART_CR3 register.*/
  huart->Instance->CR2 &= ~(USART_CR2_LINEN | USART_CR2_CLKEN);
  huart->Instance->CR3 &= ~(USART_CR3_IREN | USART_CR3_SCEN);
  
  /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */
  huart->Instance->CR3 |= USART_CR3_HDSEL;
 
  /* Enable the peripheral */
  __HAL_UART_ENABLE(huart);
  
  /* Initialize the UART state*/
  huart->ErrorCode = HAL_UART_ERROR_NONE;
  huart->State= HAL_UART_STATE_READY;
  
  return HAL_OK;
}

/**
  * @brief  Initializes the LIN mode according to the specified
  *         parameters in the UART_InitTypeDef and create the associated handle.
  * @param  huart: UART handle
  * @param  BreakDetectLength: Specifies the LIN break detection length.
  *         This parameter can be one of the following values:
  *            @arg UART_LINBREAKDETECTLENGTH_10B: 10-bit break detection
  *            @arg UART_LINBREAKDETECTLENGTH_11B: 11-bit break detection
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength)
{
  /* Check the UART handle allocation */
  if(huart == NULL)
  {
    return HAL_ERROR;
  }
  /* Check the Break detection length parameter */
  assert_param(IS_UART_LIN_BREAK_DETECT_LENGTH(BreakDetectLength));

  if(huart->State == HAL_UART_STATE_RESET)
  {   
    /* Init the low level hardware */
    HAL_UART_MspInit(huart);
  }
  
  /* Disable the peripheral */
  __HAL_UART_DISABLE(huart);
  
  /* Set the UART Communication parameters */
  UART_SetConfig(huart);
  
  /* In LIN mode, the following bits must be kept cleared: 
     - LINEN and CLKEN bits in the USART_CR2 register,
     - SCEN and IREN bits in the USART_CR3 register.*/
  huart->Instance->CR2 &= ~(USART_CR2_CLKEN);
  huart->Instance->CR3 &= ~(USART_CR3_HDSEL | USART_CR3_IREN | USART_CR3_SCEN);
  
  /* Enable the LIN mode by setting the LINEN bit in the CR2 register */
  huart->Instance->CR2 |= USART_CR2_LINEN;
  
  /* Set the USART LIN Break detection length. */
  huart->Instance->CR2 &= ~(USART_CR2_LBDL);
  huart->Instance->CR2 |= BreakDetectLength; 
  
  /* Enable the peripheral */
  __HAL_UART_ENABLE(huart);
  
  /* Initialize the UART state*/
  huart->ErrorCode = HAL_UART_ERROR_NONE;
  huart->State= HAL_UART_STATE_READY;
  
  return HAL_OK;
}

/**
  * @brief  Initializes the Multi-Processor mode according to the specified
  *         parameters in the UART_InitTypeDef and create the associated handle.
  * @param  huart: UART handle
  * @param  Address: USART address
  * @param  WakeUpMethode: specifies the USART wakeup method.
  *          This parameter can be one of the following values:
  *            @arg UART_WAKEUPMETHODE_IDLELINE: Wakeup by an idle line detection
  *            @arg UART_WAKEUPMETHODE_ADDRESSMARK: Wakeup by an address mark
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethode)
{
  /* Check the UART handle allocation */
  if(huart == NULL)
  {
    return HAL_ERROR;
  }

  /* Check the Address & wake up method parameters */
  assert_param(IS_UART_WAKEUPMETHODE(WakeUpMethode));
  assert_param(IS_UART_ADDRESS(Address));
  
  if(huart->State == HAL_UART_STATE_RESET)
  {   
    /* Init the low level hardware */
    HAL_UART_MspInit(huart);
  }
  
  /* Disable the peripheral */
  __HAL_UART_DISABLE(huart);
  
  /* Set the UART Communication parameters */
  UART_SetConfig(huart);
  
  /* In Multi-Processor mode, the following bits must be kept cleared: 
     - LINEN and CLKEN bits in the USART_CR2 register,
     - SCEN, HDSEL and IREN  bits in the USART_CR3 register */
  huart->Instance->CR2 &= ~(USART_CR2_LINEN | USART_CR2_CLKEN);
  huart->Instance->CR3 &= ~(USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN);
  
  /* Clear the USART address */
  huart->Instance->CR2 &= ~(USART_CR2_ADD);
  /* Set the USART address node */
  huart->Instance->CR2 |= Address;
  
  /* Set the wake up methode by setting the WAKE bit in the CR1 register */
  huart->Instance->CR1 &= ~(USART_CR1_WAKE);
  huart->Instance->CR1 |= WakeUpMethode;
  
  /* Enable the peripheral */
  __HAL_UART_ENABLE(huart);
  
  /* Initialize the UART state */
  huart->ErrorCode = HAL_UART_ERROR_NONE;
  huart->State= HAL_UART_STATE_READY;
  
  return HAL_OK;
}

/**
  * @brief  DeInitializes the UART peripheral. 
  * @param  huart: UART handle
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart)
{
  /* Check the UART handle allocation */
  if(huart == NULL)
  {
    return HAL_ERROR;
  }
  
  /* Check the parameters */
  assert_param(IS_UART_INSTANCE(huart->Instance));

  huart->State = HAL_UART_STATE_BUSY;
  
  /* DeInit the low level hardware */
  HAL_UART_MspDeInit(huart);
  
  huart->ErrorCode = HAL_UART_ERROR_NONE;
  huart->State = HAL_UART_STATE_RESET;

  /* Process Lock */
  __HAL_UNLOCK(huart);

  return HAL_OK;
}

/**
  * @brief  UART MSP Init.
  * @param  huart: UART handle
  * @retval None
  */
 __weak void HAL_UART_MspInit(UART_HandleTypeDef *huart)
{
  /* NOTE: This function Should not be modified, when the callback is needed,
           the HAL_UART_MspInit could be implemented in the user file
   */ 
}

/**
  * @brief  UART MSP DeInit.
  * @param  huart: UART handle
  * @retval None
  */
 __weak void HAL_UART_MspDeInit(UART_HandleTypeDef *huart)
{
  /* NOTE: This function Should not be modified, when the callback is needed,
           the HAL_UART_MspDeInit could be implemented in the user file
   */ 
}

/**
  * @}
  */

/** @defgroup UART_Group2 IO operation functions 
  *  @brief UART Transmit and Receive functions 
  *
@verbatim   
  ==============================================================================
                      ##### IO operation functions #####
  ==============================================================================  
  [..]
    This subsection provides a set of functions allowing to manage the UART asynchronous
    and Half duplex data transfers.

    (#) There are two modes of transfer:
       (++) Blocking mode: The communication is performed in polling mode. 
            The HAL status of all data processing is returned by the same function 
            after finishing transfer.  
       (++) Non-Blocking mode: The communication is performed using Interrupts 
            or DMA, these APIs return the HAL status.
            The end of the data processing will be indicated through the 
            dedicated UART IRQ when using Interrupt mode or the DMA IRQ when 
            using DMA mode.
            The HAL_UART_TxCpltCallback(), HAL_UART_RxCpltCallback() user callbacks 
            will be executed respectivelly at the end of the transmit or receive process.
            The HAL_UART_ErrorCallback() user callback will be executed when 
            a communication error is detected.

    (#) Blocking mode API's are:
        (++) HAL_UART_Transmit()
        (++) HAL_UART_Receive() 
        
    (#) Non-Blocking mode API's with Interrupt are:
        (++) HAL_UART_Transmit_IT()
        (++) HAL_UART_Receive_IT()
        (++) HAL_UART_IRQHandler()

    (#) No-Blocking mode functions with DMA are:
        (++) HAL_UART_Transmit_DMA()
        (++) HAL_UART_Receive_DMA()

    (#) A set of Transfer Complete Callbacks are provided in Non-Blocking mode:
        (++) HAL_UART_TxCpltCallback()
        (++) HAL_UART_RxCpltCallback()
        (++) HAL_UART_ErrorCallback()

    [..] 
      (@) In the Half duplex communication, it is forbidden to run the transmit 
          and receive process in parallel, the UART state HAL_UART_STATE_BUSY_TX_RX 
          can't be useful.
      
@endverbatim
  * @{
  */

/**
  * @brief  Sends an amount of data in blocking mode. 
  * @param  huart: UART handle
  * @param  pData: Pointer to data buffer
  * @param  Size: Amount of data to be sent
  * @param  Timeout: Timeout duration  
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout)
{
  uint16_t* tmp;
  uint32_t tmp1 = 0;
  
  tmp1 = huart->State;
  if((tmp1 == HAL_UART_STATE_READY) || (tmp1 == HAL_UART_STATE_BUSY_RX))
  {
    if((pData == NULL ) || (Size == 0)) 
    {
      return  HAL_ERROR;
    }
    
    /* Process Locked */
    __HAL_LOCK(huart);
    
    huart->ErrorCode = HAL_UART_ERROR_NONE;
    /* Check if a non-blocking receive process is ongoing or not */
    if(huart->State == HAL_UART_STATE_BUSY_RX) 
    {
      huart->State = HAL_UART_STATE_BUSY_TX_RX;
    }
    else
    {
      huart->State = HAL_UART_STATE_BUSY_TX;
    }

    huart->TxXferSize = Size;
    huart->TxXferCount = Size;
    while(huart->TxXferCount > 0)
    {
      huart->TxXferCount--;
      if(huart->Init.WordLength == UART_WORDLENGTH_9B)
      {
        if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, Timeout) != HAL_OK)
        { 
          return HAL_TIMEOUT;
        }
        tmp = (uint16_t*) pData;
        huart->Instance->DR = (*tmp & (uint16_t)0x01FF);
        if(huart->Init.Parity == UART_PARITY_NONE)
        {
          pData +=2;
        }
        else
        { 
          pData +=1;
        }
      } 
      else
      {
        if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, Timeout) != HAL_OK)
        {
          return HAL_TIMEOUT;
        }
        huart->Instance->DR = (*pData++ & (uint8_t)0xFF);
      } 
    }
    
    if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TC, RESET, Timeout) != HAL_OK)
    { 
      return HAL_TIMEOUT;
    }
    
    /* Check if a non-blocking receive process is ongoing or not */
    if(huart->State == HAL_UART_STATE_BUSY_TX_RX) 
    {
      huart->State = HAL_UART_STATE_BUSY_RX;
    }
    else
    {
      huart->State = HAL_UART_STATE_READY;
    }
    
    /* Process Unlocked */
    __HAL_UNLOCK(huart);
    
    return HAL_OK;
  }
  else
  {
    return HAL_BUSY;   
  }
}

/**
  * @brief  Receives an amount of data in blocking mode. 
  * @param  huart: UART handle
  * @param  pData: Pointer to data buffer
  * @param  Size: Amount of data to be received
  * @param  Timeout: Timeout duration
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout)
{ 
  uint16_t* tmp;
  uint32_t tmp1 = 0;
  
  tmp1 = huart->State;
  if((tmp1 == HAL_UART_STATE_READY) || (tmp1 == HAL_UART_STATE_BUSY_TX))
  { 
    if((pData == NULL ) || (Size == 0)) 
    {
      return  HAL_ERROR;
    }
    
    /* Process Locked */
    __HAL_LOCK(huart);
    
    huart->ErrorCode = HAL_UART_ERROR_NONE;
    /* Check if a non-blocking transmit process is ongoing or not */
    if(huart->State == HAL_UART_STATE_BUSY_TX) 
    {
      huart->State = HAL_UART_STATE_BUSY_TX_RX;
    }
    else
    {
      huart->State = HAL_UART_STATE_BUSY_RX;
    }
    
    huart->RxXferSize = Size; 
    huart->RxXferCount = Size;
    
    /* Check the remain data to be received */
    while(huart->RxXferCount > 0)
    {
      huart->RxXferCount--;
      if(huart->Init.WordLength == UART_WORDLENGTH_9B)
      {
        if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_RXNE, RESET, Timeout) != HAL_OK)
        { 
          return HAL_TIMEOUT;
        }
        tmp = (uint16_t*) pData ;
        if(huart->Init.Parity == UART_PARITY_NONE)
        {
          *tmp = (uint16_t)(huart->Instance->DR & (uint16_t)0x01FF);
          pData +=2;
        }
        else
        {
          *tmp = (uint16_t)(huart->Instance->DR & (uint16_t)0x00FF);
          pData +=1;
        }

      } 
      else
      {
        if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_RXNE, RESET, Timeout) != HAL_OK)
        { 
          return HAL_TIMEOUT;
        }
        if(huart->Init.Parity == UART_PARITY_NONE)
        {
          *pData++ = (uint8_t)(huart->Instance->DR & (uint8_t)0x00FF);
        }
        else
        {
          *pData++ = (uint8_t)(huart->Instance->DR & (uint8_t)0x007F);
        }
        
      }
    }
    
    /* Check if a non-blocking transmit process is ongoing or not */
    if(huart->State == HAL_UART_STATE_BUSY_TX_RX) 
    {
      huart->State = HAL_UART_STATE_BUSY_TX;
    }
    else
    {
      huart->State = HAL_UART_STATE_READY;
    } 
    /* Process Unlocked */
    __HAL_UNLOCK(huart);
    
    return HAL_OK;
  }
  else
  {
    return HAL_BUSY;   
  }
}

/**
  * @brief  Sends an amount of data in non blocking mode.
  * @param  huart: UART handle
  * @param  pData: Pointer to data buffer
  * @param  Size: Amount of data to be sent
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
{
  uint32_t tmp = 0;
  
  tmp = huart->State;
  if((tmp == HAL_UART_STATE_READY) || (tmp == HAL_UART_STATE_BUSY_RX))
  {
    if((pData == NULL ) || (Size == 0)) 
    {
      return HAL_ERROR;
    }
    
    /* Process Locked */
    __HAL_LOCK(huart);
    
    huart->pTxBuffPtr = pData;
    huart->TxXferSize = Size;
    huart->TxXferCount = Size;

    huart->ErrorCode = HAL_UART_ERROR_NONE;
    /* Check if a receive process is ongoing or not */
    if(huart->State == HAL_UART_STATE_BUSY_RX) 
    {
      huart->State = HAL_UART_STATE_BUSY_TX_RX;
    }
    else
    {
      huart->State = HAL_UART_STATE_BUSY_TX;
    }

    /* Enable the UART Parity Error Interrupt */
    __HAL_UART_ENABLE_IT(huart, UART_IT_PE);

    /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */
    __HAL_UART_ENABLE_IT(huart, UART_IT_ERR);

    /* Process Unlocked */
    __HAL_UNLOCK(huart);

    /* Enable the UART Transmit Complete Interrupt */
    __HAL_UART_ENABLE_IT(huart, UART_IT_TC);
    
    return HAL_OK;
  }
  else
  {
    return HAL_BUSY;   
  }
}

/**
  * @brief  Receives an amount of data in non blocking mode 
  * @param  huart: UART handle
  * @param  pData: Pointer to data buffer
  * @param  Size: Amount of data to be received
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
{
  uint32_t tmp = 0;
  
  tmp = huart->State;  
  if((tmp == HAL_UART_STATE_READY) || (tmp == HAL_UART_STATE_BUSY_TX))
  {
    if((pData == NULL ) || (Size == 0)) 
    {
      return HAL_ERROR;
    }
    
    /* Process Locked */
    __HAL_LOCK(huart);
    
    huart->pRxBuffPtr = pData;
    huart->RxXferSize = Size;
    huart->RxXferCount = Size;
    
    huart->ErrorCode = HAL_UART_ERROR_NONE;
    /* Check if a transmit process is ongoing or not */
    if(huart->State == HAL_UART_STATE_BUSY_TX) 
    {
      huart->State = HAL_UART_STATE_BUSY_TX_RX;
    }
    else
    {
      huart->State = HAL_UART_STATE_BUSY_RX;
    }
    
    /* Enable the UART Parity Error Interrupt */
    __HAL_UART_ENABLE_IT(huart, UART_IT_PE);
    
    /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */
    __HAL_UART_ENABLE_IT(huart, UART_IT_ERR);
    
    /* Process Unlocked */
    __HAL_UNLOCK(huart);
    
    /* Enable the UART Data Register not empty Interrupt */
    __HAL_UART_ENABLE_IT(huart, UART_IT_RXNE);
    
    return HAL_OK;
  }
  else
  {
    return HAL_BUSY; 
  }
}

/**
  * @brief  Sends an amount of data in non blocking mode. 
  * @param  huart: UART handle
  * @param  pData: Pointer to data buffer
  * @param  Size: Amount of data to be sent
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
{
  uint32_t *tmp;
  uint32_t tmp1 = 0;
  
  tmp1 = huart->State;  
  if((tmp1 == HAL_UART_STATE_READY) || (tmp1 == HAL_UART_STATE_BUSY_RX))
  {
    if((pData == NULL ) || (Size == 0)) 
    {
      return HAL_ERROR;
    }
    
    /* Process Locked */
    __HAL_LOCK(huart);
    
    huart->pTxBuffPtr = pData;
    huart->TxXferSize = Size;
    huart->TxXferCount = Size;
    
    huart->ErrorCode = HAL_UART_ERROR_NONE;
    /* Check if a receive process is ongoing or not */
    if(huart->State == HAL_UART_STATE_BUSY_RX) 
    {
      huart->State = HAL_UART_STATE_BUSY_TX_RX;
    }
    else
    {
      huart->State = HAL_UART_STATE_BUSY_TX;
    }
    
    /* Set the UART DMA transfer complete callback */
    huart->hdmatx->XferCpltCallback = UART_DMATransmitCplt;
    
    /* Set the UART DMA Half transfer complete callback */
    huart->hdmatx->XferHalfCpltCallback = UART_DMATxHalfCplt;
    
    /* Set the DMA error callback */
    huart->hdmatx->XferErrorCallback = UART_DMAError;

    /* Enable the UART transmit DMA Stream */
    tmp = (uint32_t*)&pData;
    HAL_DMA_Start_IT(huart->hdmatx, *(uint32_t*)tmp, (uint32_t)&huart->Instance->DR, Size);
    
    /* Enable the DMA transfer for transmit request by setting the DMAT bit
       in the UART CR3 register */
    huart->Instance->CR3 |= USART_CR3_DMAT;
    
    /* Process Unlocked */
    __HAL_UNLOCK(huart);
    
    return HAL_OK;
  }
  else
  {
    return HAL_BUSY;   
  }
}

/**
  * @brief  Receives an amount of data in non blocking mode. 
  * @param  huart: UART handle
  * @param  pData: Pointer to data buffer
  * @param  Size: Amount of data to be received
  * @note   When the UART parity is enabled (PCE = 1) the data received contain the parity bit.
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
{
  uint32_t *tmp;
  uint32_t tmp1 = 0;
  
  tmp1 = huart->State;    
  if((tmp1 == HAL_UART_STATE_READY) || (tmp1 == HAL_UART_STATE_BUSY_TX))
  {
    if((pData == NULL ) || (Size == 0)) 
    {
      return HAL_ERROR;
    }
    
    /* Process Locked */
    __HAL_LOCK(huart);
    
    huart->pRxBuffPtr = pData;
    huart->RxXferSize = Size;
    
    huart->ErrorCode = HAL_UART_ERROR_NONE;
    /* Check if a transmit rocess is ongoing or not */
    if(huart->State == HAL_UART_STATE_BUSY_TX) 
    {
      huart->State = HAL_UART_STATE_BUSY_TX_RX;
    }
    else
    {
      huart->State = HAL_UART_STATE_BUSY_RX;
    }
    
    /* Set the UART DMA transfer complete callback */
    huart->hdmarx->XferCpltCallback = UART_DMAReceiveCplt;
    
    /* Set the UART DMA Half transfer complete callback */
    huart->hdmarx->XferHalfCpltCallback = UART_DMARxHalfCplt;
    
    /* Set the DMA error callback */
    huart->hdmarx->XferErrorCallback = UART_DMAError;

    /* Enable the DMA Stream */
    tmp = (uint32_t*)&pData;
    HAL_DMA_Start_IT(huart->hdmarx, (uint32_t)&huart->Instance->DR, *(uint32_t*)tmp, Size);
    
    /* Enable the DMA transfer for the receiver request by setting the DMAR bit 
    in the UART CR3 register */
    huart->Instance->CR3 |= USART_CR3_DMAR;
    
    /* Process Unlocked */
    __HAL_UNLOCK(huart);
    
    return HAL_OK;
  }
  else
  {
    return HAL_BUSY; 
  }
}
    
/**
  * @brief Pauses the DMA Transfer.
  * @param huart: UART handle
  * @retval None
  */
HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart)
{
  /* Process Locked */
  __HAL_LOCK(huart);
  
  if(huart->State == HAL_UART_STATE_BUSY_TX)
  {
    /* Disable the UART DMA Tx request */
    huart->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAT);
  }
  else if(huart->State == HAL_UART_STATE_BUSY_RX)
  {
    /* Disable the UART DMA Rx request */
    huart->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAR);
  }
  else if (huart->State == HAL_UART_STATE_BUSY_TX_RX)
  {
    /* Disable the UART DMA Tx & Rx requests */
    huart->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAT);
    huart->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAR);
  }
  
  /* Process Unlocked */
  __HAL_UNLOCK(huart);
  
  return HAL_OK; 
}

/**
  * @brief Resumes the DMA Transfer.
  * @param huart: UART handle
  * @retval None
  */
HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart)
{
  /* Process Locked */
  __HAL_LOCK(huart);
  
  if(huart->State == HAL_UART_STATE_BUSY_TX)
  {
    /* Enable the UART DMA Tx request */
    huart->Instance->CR3 |= USART_CR3_DMAT;
  }
  else if(huart->State == HAL_UART_STATE_BUSY_RX)
  {
    /* Enable the UART DMA Rx request */
    huart->Instance->CR3 |= USART_CR3_DMAR;
  }
  else if(huart->State == HAL_UART_STATE_BUSY_TX_RX)
  {
    /* Enable the UART DMA Tx & Rx request */
    huart->Instance->CR3 |= USART_CR3_DMAT;
    huart->Instance->CR3 |= USART_CR3_DMAR;
  }

  /* If the UART peripheral is still not enabled, enable it */
  if ((huart->Instance->CR1 & USART_CR1_UE) == 0)
  {
    /* Enable UART peripheral */    
    __HAL_UART_ENABLE(huart);
  }
  
  /* Process Unlocked */
  __HAL_UNLOCK(huart);
  
  return HAL_OK;
}

/**
  * @brief Stops the DMA Transfer.
  * @param huart: UART handle
  * @retval None
  */
HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart)
{
  /* Process Locked */
  __HAL_LOCK(huart);
  
  /* Disable the UART Tx/Rx DMA requests */
  huart->Instance->CR3 &= ~USART_CR3_DMAT;
  huart->Instance->CR3 &= ~USART_CR3_DMAR;
  
  /* Abort the UART DMA tx Stream */
  if(huart->hdmatx != NULL)
  {
    HAL_DMA_Abort(huart->hdmatx);
  }
  /* Abort the UART DMA rx Stream */
  if(huart->hdmarx != NULL)
  {
    HAL_DMA_Abort(huart->hdmarx);
  }
  /* Disable UART peripheral */
  __HAL_UART_DISABLE(huart);
  
  huart->State = HAL_UART_STATE_READY;
  
  /* Process Unlocked */
  __HAL_UNLOCK(huart);
  
  return HAL_OK;
}

/**
  * @brief  This function handles UART interrupt request.
  * @param  huart: UART handle
  * @retval None
  */
void HAL_UART_IRQHandler(UART_HandleTypeDef *huart)
{
  uint32_t tmp1 = 0, tmp2 = 0;

  tmp1 = __HAL_UART_GET_FLAG(huart, UART_FLAG_PE);
  tmp2 = __HAL_UART_GET_IT_SOURCE(huart, UART_IT_PE);  
  /* UART parity error interrupt occurred ------------------------------------*/
  if((tmp1 != RESET) && (tmp2 != RESET))
  { 
    __HAL_UART_CLEAR_FLAG(huart, UART_FLAG_PE);
    
    huart->ErrorCode |= HAL_UART_ERROR_PE;
  }
  
  tmp1 = __HAL_UART_GET_FLAG(huart, UART_FLAG_FE);
  tmp2 = __HAL_UART_GET_IT_SOURCE(huart, UART_IT_ERR);
  /* UART frame error interrupt occurred -------------------------------------*/
  if((tmp1 != RESET) && (tmp2 != RESET))
  { 
    __HAL_UART_CLEAR_FLAG(huart, UART_FLAG_FE);
    
    huart->ErrorCode |= HAL_UART_ERROR_FE;
  }
  
  tmp1 = __HAL_UART_GET_FLAG(huart, UART_FLAG_NE);
  tmp2 = __HAL_UART_GET_IT_SOURCE(huart, UART_IT_ERR);
  /* UART noise error interrupt occurred -------------------------------------*/
  if((tmp1 != RESET) && (tmp2 != RESET))
  { 
    __HAL_UART_CLEAR_FLAG(huart, UART_FLAG_NE);
    
    huart->ErrorCode |= HAL_UART_ERROR_NE;
  }
  
  tmp1 = __HAL_UART_GET_FLAG(huart, UART_FLAG_ORE);
  tmp2 = __HAL_UART_GET_IT_SOURCE(huart, UART_IT_ERR);
  /* UART Over-Run interrupt occurred ----------------------------------------*/
  if((tmp1 != RESET) && (tmp2 != RESET))
  { 
    __HAL_UART_CLEAR_FLAG(huart, UART_FLAG_ORE);
    
    huart->ErrorCode |= HAL_UART_ERROR_ORE;
  }
  
  tmp1 = __HAL_UART_GET_FLAG(huart, UART_FLAG_RXNE);
  tmp2 = __HAL_UART_GET_IT_SOURCE(huart, UART_IT_RXNE);
  /* UART in mode Receiver ---------------------------------------------------*/
  if((tmp1 != RESET) && (tmp2 != RESET))
  { 
    UART_Receive_IT(huart);
    __HAL_UART_CLEAR_FLAG(huart, UART_FLAG_RXNE);
  }
  
  tmp1 = __HAL_UART_GET_FLAG(huart, UART_FLAG_TC);
  tmp2 = __HAL_UART_GET_IT_SOURCE(huart, UART_IT_TC);
  /* UART in mode Transmitter ------------------------------------------------*/
  if((tmp1 != RESET) && (tmp2 != RESET))
  {
    UART_Transmit_IT(huart);
    __HAL_UART_CLEAR_FLAG(huart, UART_FLAG_TC);
  }
  
  if(huart->ErrorCode != HAL_UART_ERROR_NONE)
  {
    /* Set the UART state ready to be able to start again the process */
    huart->State = HAL_UART_STATE_READY;
    
    HAL_UART_ErrorCallback(huart);
  }  
}

/**
  * @brief  Tx Transfer completed callbacks.
  * @param  huart: UART handle
  * @retval None
  */
 __weak void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart)
{
  /* NOTE: This function Should not be modified, when the callback is needed,
           the HAL_UART_TxCpltCallback could be implemented in the user file
   */ 
}

/**
  * @brief  Tx Half Transfer completed callbacks.
  * @param  huart: UART handle
  * @retval None
  */
 __weak void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart)
{
  /* NOTE: This function Should not be modified, when the callback is needed,
           the HAL_UART_TxCpltCallback could be implemented in the user file
   */ 
}

/**
  * @brief  Rx Transfer completed callbacks.
  * @param  huart: UART handle
  * @retval None
  */
__weak void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart)
{
  /* NOTE: This function Should not be modified, when the callback is needed,
           the HAL_UART_TxCpltCallback could be implemented in the user file
   */
}

/**
  * @brief  Rx Half Transfer completed callbacks.
  * @param  huart: UART handle
  * @retval None
  */
__weak void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart)
{
  /* NOTE: This function Should not be modified, when the callback is needed,
           the HAL_UART_TxCpltCallback could be implemented in the user file
   */
}

/**
  * @brief  UART error callbacks.
  * @param  huart: UART handle
  * @retval None
  */
 __weak void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart)
{
  /* NOTE: This function Should not be modified, when the callback is needed,
           the HAL_UART_ErrorCallback could be implemented in the user file
   */ 
}

/**
  * @}
  */

/** @defgroup UART_Group3 Peripheral Control functions 
  *  @brief   UART control functions 
  *
@verbatim   
  ==============================================================================
                      ##### Peripheral Control functions #####
  ==============================================================================  
  [..]
    This subsection provides a set of functions allowing to control the UART:
    (+) HAL_LIN_SendBreak() API can be helpful to transmit the break character.
    (+) HAL_MultiProcessor_EnterMuteMode() API can be helpful to enter the UART in mute mode. 
    (+) HAL_MultiProcessor_ExitMuteMode() API can be helpful to exit the UART mute mode by software.
    
@endverbatim
  * @{
  */

/**
  * @brief  Transmits break characters.
  * @param  huart: UART handle
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart)
{
  /* Check the parameters */
  assert_param(IS_UART_INSTANCE(huart->Instance));
  
  /* Process Locked */
  __HAL_LOCK(huart);
  
  huart->State = HAL_UART_STATE_BUSY;
  
  /* Send break characters */
  huart->Instance->CR1 |= USART_CR1_SBK;
 
  huart->State = HAL_UART_STATE_READY;
  
  /* Process Unlocked */
  __HAL_UNLOCK(huart);
  
  return HAL_OK; 
}

/**
  * @brief  Enters the UART in mute mode. 
  * @param  huart: UART handle
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart)
{
  /* Check the parameters */
  assert_param(IS_UART_INSTANCE(huart->Instance));
  
  /* Process Locked */
  __HAL_LOCK(huart);
  
  huart->State = HAL_UART_STATE_BUSY;
  
  /* Enable the USART mute mode  by setting the RWU bit in the CR1 register */
  huart->Instance->CR1 |= USART_CR1_RWU;
  
  huart->State = HAL_UART_STATE_READY;
  
  /* Process Unlocked */
  __HAL_UNLOCK(huart);
  
  return HAL_OK; 
}

/**
  * @brief  Exits the UART mute mode: wake up software. 
  * @param  huart: UART handle
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_MultiProcessor_ExitMuteMode(UART_HandleTypeDef *huart)
{
  /* Check the parameters */
  assert_param(IS_UART_INSTANCE(huart->Instance));
  
  /* Process Locked */
  __HAL_LOCK(huart);
  
  huart->State = HAL_UART_STATE_BUSY;
  
  /* Disable the USART mute mode by clearing the RWU bit in the CR1 register */
  huart->Instance->CR1 &= (uint32_t)~((uint32_t)USART_CR1_RWU);
  
  huart->State = HAL_UART_STATE_READY;
  
  /* Process Unlocked */
  __HAL_UNLOCK(huart);
  
  return HAL_OK; 
}

/**
  * @brief  Enables the UART transmitter and disables the UART receiver.
  * @param  huart: UART handle
  * @retval HAL status
  * @retval None
  */
HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart)
{
  uint32_t tmpreg = 0x00;

  /* Process Locked */
  __HAL_LOCK(huart);
  
  huart->State = HAL_UART_STATE_BUSY;

  /*-------------------------- USART CR1 Configuration -----------------------*/
  tmpreg = huart->Instance->CR1;
  
  /* Clear TE and RE bits */
  tmpreg &= (uint32_t)~((uint32_t)(USART_CR1_TE | USART_CR1_RE));
  
  /* Enable the USART's transmit interface by setting the TE bit in the USART CR1 register */
  tmpreg |= (uint32_t)USART_CR1_TE;
  
  /* Write to USART CR1 */
  huart->Instance->CR1 = (uint32_t)tmpreg;
 
  huart->State = HAL_UART_STATE_READY;
  
  /* Process Unlocked */
  __HAL_UNLOCK(huart);
  
  return HAL_OK; 
}

/**
  * @brief  Enables the UART receiver and disables the UART transmitter.
  * @param  huart: UART handle
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart)
{
  uint32_t tmpreg = 0x00;

  /* Process Locked */
  __HAL_LOCK(huart);
  
  huart->State = HAL_UART_STATE_BUSY;

  /*-------------------------- USART CR1 Configuration -----------------------*/
  tmpreg = huart->Instance->CR1;
  
  /* Clear TE and RE bits */
  tmpreg &= (uint32_t)~((uint32_t)(USART_CR1_TE | USART_CR1_RE));
  
  /* Enable the USART's receive interface by setting the RE bit in the USART CR1 register */
  tmpreg |= (uint32_t)USART_CR1_RE;
  
  /* Write to USART CR1 */
  huart->Instance->CR1 = (uint32_t)tmpreg;
  
  huart->State = HAL_UART_STATE_READY;
  
  /* Process Unlocked */
  __HAL_UNLOCK(huart);
  
  return HAL_OK; 
}

/**
  * @}
  */

/** @defgroup UART_Group4 Peripheral State and Errors functions 
  *  @brief   UART State and Errors functions 
  *
@verbatim   
  ==============================================================================
                 ##### Peripheral State and Errors functions #####
  ==============================================================================  
 [..]
   This subsection provides a set of functions allowing to return the State of 
   UART communication process, return Peripheral Errors occured during communication 
   process
   (+) HAL_UART_GetState() API can be helpful to check in run-time the state of the UART peripheral.
   (+) HAL_UART_GetError() check in run-time errors that could be occured durung communication. 

@endverbatim
  * @{
  */
  
/**
  * @brief  Returns the UART state.
  * @param  huart: UART handle
  * @retval HAL state
  */
HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart)
{
  return huart->State;
}

/**
* @brief  Return the UART error code
* @param  huart : pointer to a UART_HandleTypeDef structure that contains
  *              the configuration information for the specified UART.
* @retval UART Error Code
*/
uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart)
{
  return huart->ErrorCode;
}

/**
  * @}
  */

/**
  * @brief  DMA UART transmit process complete callback. 
  * @param  hdma: DMA handle
  * @retval None
  */
static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma)     
{
  UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
  huart->TxXferCount = 0;
  
  /* Disable the DMA transfer for transmit request by setting the DMAT bit
     in the UART CR3 register */
  huart->Instance->CR3 &= (uint32_t)~((uint32_t)USART_CR3_DMAT);

  /* Wait for UART TC Flag */
  if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TC, RESET, UART_TIMEOUT_VALUE) != HAL_OK)
  {
    /* Timeout Occured */ 
    huart->State = HAL_UART_STATE_TIMEOUT;
    HAL_UART_ErrorCallback(huart);
  }
  else
  {
    /* No Timeout */
    /* Check if a receive process is ongoing or not */
    if(huart->State == HAL_UART_STATE_BUSY_TX_RX)
    {
      huart->State = HAL_UART_STATE_BUSY_RX;
    }
    else
    {
      huart->State = HAL_UART_STATE_READY;
    }
    HAL_UART_TxCpltCallback(huart);
  }
}

/**
  * @brief DMA UART transmit process half complete callback 
  * @param hdma : DMA handle
  * @retval None
  */
static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma)
{
  UART_HandleTypeDef* huart = (UART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;

  HAL_UART_TxHalfCpltCallback(huart);
}

/**
  * @brief  DMA UART receive process complete callback. 
  * @param  hdma: DMA handle
  * @retval None
  */
static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma)  
{
  UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
  huart->RxXferCount = 0;
  
  /* Disable the DMA transfer for the receiver request by setting the DMAR bit 
     in the UART CR3 register */
  huart->Instance->CR3 &= (uint32_t)~((uint32_t)USART_CR3_DMAR);

  /* Check if a transmit process is ongoing or not */
  if(huart->State == HAL_UART_STATE_BUSY_TX_RX) 
  {
    huart->State = HAL_UART_STATE_BUSY_TX;
  }
  else
  {
    huart->State = HAL_UART_STATE_READY;
  }
  HAL_UART_RxCpltCallback(huart);
}

/**
  * @brief DMA UART receive process half complete callback 
  * @param hdma : DMA handle
  * @retval None
  */
static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma)
{
  UART_HandleTypeDef* huart = (UART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;

  HAL_UART_RxHalfCpltCallback(huart); 
}

/**
  * @brief  DMA UART communication error callback.
  * @param  hdma: DMA handle
  * @retval None
  */
static void UART_DMAError(DMA_HandleTypeDef *hdma)   
{
  UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
  huart->RxXferCount = 0;
  huart->TxXferCount = 0;
  huart->State= HAL_UART_STATE_READY;
  huart->ErrorCode |= HAL_UART_ERROR_DMA;
  HAL_UART_ErrorCallback(huart);
}

/**
  * @brief  This function handles UART Communication Timeout.
  * @param  huart: UART handle
  * @param  Flag: specifies the UART flag to check.
  * @param  Status: The new Flag status (SET or RESET).
  * @param  Timeout: Timeout duration
  * @retval HAL status
  */
static HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Timeout)
{
  uint32_t timeout = 0;
  
  timeout = HAL_GetTick() + Timeout;
  
  /* Wait until flag is set */
  if(Status == RESET)
  {
    while(__HAL_UART_GET_FLAG(huart, Flag) == RESET)
    {
      /* Check for the Timeout */
      if(Timeout != HAL_MAX_DELAY)
      {
        if(HAL_GetTick() >= timeout)
        {
          /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
          __HAL_UART_DISABLE_IT(huart, UART_IT_TXE);
          __HAL_UART_DISABLE_IT(huart, UART_IT_RXNE);
          __HAL_UART_DISABLE_IT(huart, UART_IT_PE);
          __HAL_UART_DISABLE_IT(huart, UART_IT_ERR);

          huart->State= HAL_UART_STATE_READY;

          /* Process Unlocked */
          __HAL_UNLOCK(huart);

          return HAL_TIMEOUT;
        }
      }
    }
  }
  else
  {
    while(__HAL_UART_GET_FLAG(huart, Flag) != RESET)
    {
      /* Check for the Timeout */
      if(Timeout != HAL_MAX_DELAY)
      {
        if(HAL_GetTick() >= timeout)
        {
          /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
          __HAL_UART_DISABLE_IT(huart, UART_IT_TXE);
          __HAL_UART_DISABLE_IT(huart, UART_IT_RXNE);
          __HAL_UART_DISABLE_IT(huart, UART_IT_PE);
          __HAL_UART_DISABLE_IT(huart, UART_IT_ERR);

          huart->State= HAL_UART_STATE_READY;

          /* Process Unlocked */
          __HAL_UNLOCK(huart);
        
          return HAL_TIMEOUT;
        }
      }
    }
  }
  return HAL_OK;      
}

/**
  * @brief  Sends an amount of data in non blocking mode.
  * @param  huart: UART handle
  * @retval HAL status
  */
static HAL_StatusTypeDef UART_Transmit_IT(UART_HandleTypeDef *huart)
{
  uint16_t* tmp;
  uint32_t tmp1 = 0;
  
  tmp1 = huart->State;
  if((tmp1 == HAL_UART_STATE_BUSY_TX) || (tmp1 == HAL_UART_STATE_BUSY_TX_RX))
  {
    /* Process Locked */
    __HAL_LOCK(huart);
    
    if(huart->Init.WordLength == UART_WORDLENGTH_9B)
    {
      tmp = (uint16_t*) huart->pTxBuffPtr;
      huart->Instance->DR = (uint16_t)(*tmp & (uint16_t)0x01FF);
      if(huart->Init.Parity == UART_PARITY_NONE)
      {
        huart->pTxBuffPtr += 2;
      }
      else
      {
        huart->pTxBuffPtr += 1;
      }
    } 
    else
    {
      huart->Instance->DR = (uint8_t)(*huart->pTxBuffPtr++ & (uint8_t)0x00FF);
    }

    if(--huart->TxXferCount == 0)
    {
      /* Disable the UART Transmit Complete Interrupt */
      __HAL_UART_DISABLE_IT(huart, UART_IT_TC);
      
      /* Check if a receive process is ongoing or not */
      if(huart->State == HAL_UART_STATE_BUSY_TX_RX) 
      {
        huart->State = HAL_UART_STATE_BUSY_RX;
      }
      else
      {
        /* Disable the UART Parity Error Interrupt */
        __HAL_UART_DISABLE_IT(huart, UART_IT_PE);
        
        /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */
        __HAL_UART_DISABLE_IT(huart, UART_IT_ERR);
        
        huart->State = HAL_UART_STATE_READY;
      }
      /* Call the Process Unlocked before calling the Tx callback API to give the possibility to
         start again the Transmission under the Tx callback API */
      __HAL_UNLOCK(huart);
      
      HAL_UART_TxCpltCallback(huart);
      
      return HAL_OK;
    }

    /* Process Unlocked */
    __HAL_UNLOCK(huart);

      return HAL_OK;
  }
  else
  {
    return HAL_BUSY;   
  }
}
/**
  * @brief  Receives an amount of data in non blocking mode 
  * @param  huart: UART handle
  * @retval HAL status
  */
static HAL_StatusTypeDef UART_Receive_IT(UART_HandleTypeDef *huart)
{
  uint16_t* tmp;
  uint32_t tmp1 = 0;
  
  tmp1 = huart->State; 
  if((tmp1 == HAL_UART_STATE_BUSY_RX) || (tmp1 == HAL_UART_STATE_BUSY_TX_RX))
  {
    /* Process Locked */
    __HAL_LOCK(huart);
    
    if(huart->Init.WordLength == UART_WORDLENGTH_9B)
    {
      tmp = (uint16_t*) huart->pRxBuffPtr;
      if(huart->Init.Parity == UART_PARITY_NONE)
      {
        *tmp = (uint16_t)(huart->Instance->DR & (uint16_t)0x01FF);
        huart->pRxBuffPtr += 2;
      }
      else
      {
        *tmp = (uint16_t)(huart->Instance->DR & (uint16_t)0x00FF);
        huart->pRxBuffPtr += 1;
      }
    }
    else
    {
      if(huart->Init.Parity == UART_PARITY_NONE)
      {
        *huart->pRxBuffPtr++ = (uint8_t)(huart->Instance->DR & (uint8_t)0x00FF);
      }
      else
      {
        *huart->pRxBuffPtr++ = (uint8_t)(huart->Instance->DR & (uint8_t)0x007F);
      }
    }
    
    if(--huart->RxXferCount == 0)
    {
      while(HAL_IS_BIT_SET(huart->Instance->SR, UART_FLAG_RXNE))
      {
      }
      __HAL_UART_DISABLE_IT(huart, UART_IT_RXNE);
      
      /* Check if a transmit process is ongoing or not */
      if(huart->State == HAL_UART_STATE_BUSY_TX_RX) 
      {
        huart->State = HAL_UART_STATE_BUSY_TX;
      }
      else
      {
        /* Disable the UART Parity Error Interrupt */
        __HAL_UART_DISABLE_IT(huart, UART_IT_PE);
        
        /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */
        __HAL_UART_DISABLE_IT(huart, UART_IT_ERR);
        
        huart->State = HAL_UART_STATE_READY;
      }
      /* Call the Process Unlocked before calling the Rx callback API to give the possibility to
         start again the reception under the Rx callback API */
      __HAL_UNLOCK(huart);
      
      HAL_UART_RxCpltCallback(huart);
      
      return HAL_OK;
    }
    /* Process Unlocked */
    __HAL_UNLOCK(huart);
    
    return HAL_OK;
  }
  else
  {
    return HAL_BUSY; 
  }
}

/**
  * @brief  Configures the UART peripheral. 
  * @param  huart: UART handle
  * @retval None
  */
static void UART_SetConfig(UART_HandleTypeDef *huart)
{
  uint32_t tmpreg = 0x00;
  
  /* Check the parameters */
  assert_param(IS_UART_INSTANCE(huart->Instance));
  assert_param(IS_UART_BAUDRATE(huart->Init.BaudRate));  
  assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength));
  assert_param(IS_UART_STOPBITS(huart->Init.StopBits));
  assert_param(IS_UART_PARITY(huart->Init.Parity));
  assert_param(IS_UART_MODE(huart->Init.Mode));
  assert_param(IS_UART_HARDWARE_FLOW_CONTROL(huart->Init.HwFlowCtl));

  /* The hardware flow control is available only for USART1, USART2, USART3 and USART6 */
  if(huart->Init.HwFlowCtl != UART_HWCONTROL_NONE)
  {
    assert_param(IS_UART_HWFLOW_INSTANCE(huart->Instance));
  }

  /*-------------------------- USART CR2 Configuration -----------------------*/
  tmpreg = huart->Instance->CR2;

  /* Clear STOP[13:12] bits */
  tmpreg &= (uint32_t)~((uint32_t)USART_CR2_STOP);

  /* Configure the UART Stop Bits: Set STOP[13:12] bits according to huart->Init.StopBits value */
  tmpreg |= (uint32_t)huart->Init.StopBits;
  
  /* Write to USART CR2 */
  huart->Instance->CR2 = (uint32_t)tmpreg;

  /*-------------------------- USART CR1 Configuration -----------------------*/
  tmpreg = huart->Instance->CR1;

  /* Clear M, PCE, PS, TE and RE bits */
  tmpreg &= (uint32_t)~((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | \
                                   USART_CR1_RE | USART_CR1_OVER8));

  /* Configure the UART Word Length, Parity and mode: 
     Set the M bits according to huart->Init.WordLength value 
     Set PCE and PS bits according to huart->Init.Parity value
     Set TE and RE bits according to huart->Init.Mode value
     Set OVER8 bit according to huart->Init.OverSampling value */
  tmpreg |= (uint32_t)huart->Init.WordLength | huart->Init.Parity | huart->Init.Mode | huart->Init.OverSampling;
  
  /* Write to USART CR1 */
  huart->Instance->CR1 = (uint32_t)tmpreg;
  
  /*-------------------------- USART CR3 Configuration -----------------------*/  
  tmpreg = huart->Instance->CR3;
  
  /* Clear CTSE and RTSE bits */
  tmpreg &= (uint32_t)~((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE));
  
  /* Configure the UART HFC: Set CTSE and RTSE bits according to huart->Init.HwFlowCtl value */
  tmpreg |= huart->Init.HwFlowCtl;
  
  /* Write to USART CR3 */
  huart->Instance->CR3 = (uint32_t)tmpreg;
  
  /* Check the Over Sampling */
  if(huart->Init.OverSampling == UART_OVERSAMPLING_8)
  {
    /*-------------------------- USART BRR Configuration ---------------------*/
    if((huart->Instance == USART1) || (huart->Instance == USART6))
    {
      huart->Instance->BRR = __UART_BRR_SAMPLING8(HAL_RCC_GetPCLK2Freq(), huart->Init.BaudRate);
    }
    else
    {
      huart->Instance->BRR = __UART_BRR_SAMPLING8(HAL_RCC_GetPCLK1Freq(), huart->Init.BaudRate);
    }
  }
  else
  {
    /*-------------------------- USART BRR Configuration ---------------------*/
    if((huart->Instance == USART1) || (huart->Instance == USART6))
    {
      huart->Instance->BRR = __UART_BRR_SAMPLING16(HAL_RCC_GetPCLK2Freq(), huart->Init.BaudRate);
    }
    else
    {
      huart->Instance->BRR = __UART_BRR_SAMPLING16(HAL_RCC_GetPCLK1Freq(), huart->Init.BaudRate);
    }
  }
}

/**
  * @}
  */

#endif /* HAL_UART_MODULE_ENABLED */
/**
  * @}
  */

/**
  * @}
  */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/